You are not logged in.

Pages: 1

#1 2019-05-08 07:47:10

g0rbe
Member
Registered: 2019-01-07
Posts: 5

[SOLVED] Monitor with HDMI freeze at startup

Hi!

I try to configure my monitor (AOC U3277PQU) to use on 4K@60fps with HDMI 2.0. Only 30fps i can get.

My vga is an intel uhd630.

Tried to get the EDID information with get-edid, but it shows a totally unrelevant resolution.

Tried to configure the resolution with  xrandr. It does do nothing.

Now trying to configure in the xorg-conf.d.

Here is my .conf file:

Section "Device"
	Identifier	"Device0"
	Driver		"intel"
	Option		"ModeValidation" "AllowNonEdidModes"
	Option		"Monitor-eDP1" "laptop"
	Option		"Monitor-HDMI1" "HDMI"
EndSection

Section "Monitor"
        Identifier      "laptop"
	Option		"PreferredMode" "1920x1080"
EndSection

Section "Monitor"
        Identifier       "HDMI"
        Modeline       "3840x2160_60.00"  712.75  3840 4160 4576 5312  2160 2163 2168 2237 -hsync +vsync
        Option          "PreferredMode" "3840x2160_60.00"
        Option          "UseEdid" "False"
	Option		"RightOf" "eDP1"
EndSection

xrandr -q:

Screen 0: minimum 8 x 8, current 5760 x 2160, maximum 32767 x 32767
eDP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 340mm x 190mm
   1920x1080     60.00*+  59.93    48.00  
   1680x1050     59.95    59.88  
   1400x1050     59.98  
   1600x900      60.00    59.95    59.82  
   1280x1024     60.02  
   1400x900      59.96    59.88  
   1280x960      60.00  
   1368x768      60.00    59.88    59.85  
   1280x800      59.81    59.91  
   1280x720      59.86    60.00    59.74  
   1024x768      60.00  
   1024x576      60.00    59.90    59.82  
   960x540       60.00    59.63    59.82  
   800x600       60.32    56.25  
   864x486       60.00    59.92    59.57  
   640x480       59.94  
   720x405       59.51    60.00    58.99  
   640x360       59.84    59.32    60.00  
DP1 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 3840x2160+1920+0 (normal left inverted right x axis y axis) 700mm x 390mm
   3840x2160_60.00  59.98 *+ 
   3840x2160     30.00    30.00    25.00    24.00    29.97    23.98    29.98  
   1920x2160     59.99  
   1920x1080     60.00    60.00    50.00    59.94  
   1680x1050     59.88  
   1280x1024     75.02    60.02  
   1440x900      74.98    59.90  
   1280x960      60.00  
   1280x720      60.00    50.00    59.94  
   1024x768      75.03    60.00  
   800x600       75.00    60.32  
   720x576       50.00  
   720x480       60.00    59.94  
   640x480       75.00    72.81    66.67    60.00    59.94  
   720x400       70.08  
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)

Xorg log:

[     3.935] 
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[     3.935] Build Operating System: Linux Arch Linux
[     3.935] Current Operating System: Linux arch 5.0.13-arch1-1-ARCH #1 SMP PREEMPT Sun May 5 18:05:41 UTC 2019 x86_64
[     3.936] Kernel command line: initrd=\initramfs-linux.img root=UUID=87508afa-df75-40bc-b151-ff228fa23b71 rw
[     3.936] Build Date: 27 February 2019  04:04:00PM
[     3.936]  
[     3.936] Current version of pixman: 0.38.4
[     3.936] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     3.936] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.936] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May  8 01:26:03 2019
[     3.940] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     3.940] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     3.942] (==) No Layout section.  Using the first Screen section.
[     3.942] (==) No screen section available. Using defaults.
[     3.942] (**) |-->Screen "Default Screen Section" (0)
[     3.942] (**) |   |-->Monitor "<default monitor>"
[     3.943] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[     3.943] (**) |   |-->Device "Device0"
[     3.943] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     3.943] (==) Automatically adding devices
[     3.943] (==) Automatically enabling devices
[     3.943] (==) Automatically adding GPU devices
[     3.943] (==) Automatically binding GPU devices
[     3.943] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     3.949] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     3.949] 	Entry deleted from font path.
[     3.949] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[     3.949] 	Entry deleted from font path.
[     3.949] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[     3.949] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[     3.949] 	Entry deleted from font path.
[     3.949] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[     3.950] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF
[     3.950] (==) ModulePath set to "/usr/lib/xorg/modules"
[     3.950] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     3.950] (II) Module ABI versions:
[     3.950] 	X.Org ANSI C Emulation: 0.4
[     3.950] 	X.Org Video Driver: 24.0
[     3.950] 	X.Org XInput driver : 24.1
[     3.950] 	X.Org Server Extension : 10.0
[     3.951] (++) using VT number 1

[     3.951] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     3.953] (II) xfree86: Adding drm device (/dev/dri/card0)
[     3.989] (--) PCI:*(0@0:2:0) 8086:3e9b:1028:0819 rev 0, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[     3.989] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     3.989] (II) LoadModule: "glx"
[     3.990] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     4.004] (II) Module glx: vendor="X.Org Foundation"
[     4.004] 	compiled for 1.20.4, module version = 1.0.0
[     4.004] 	ABI class: X.Org Server Extension, version 10.0
[     4.004] (II) LoadModule: "intel"
[     4.007] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     4.010] (II) Module intel: vendor="X.Org Foundation"
[     4.010] 	compiled for 1.20.4, module version = 2.99.917
[     4.010] 	Module class: X.Org Video Driver
[     4.010] 	ABI class: X.Org Video Driver, version 24.0
[     4.010] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     4.010] (II) intel: Driver for Intel(R) HD Graphics
[     4.010] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     4.010] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     4.011] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20181204
[     4.011] (II) intel(0): SNA compiled from 2.99.917-863-g6afed33b
[     4.028] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[     4.028] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[     4.028] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     4.028] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     4.028] (==) intel(0): RGB weight 888
[     4.028] (==) intel(0): Default visual is TrueColor
[     4.030] (II) intel(0): Output eDP1 using monitor section laptop
[     4.030] (**) intel(0): Option "PreferredMode" "1920x1080"
[     4.030] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[     4.030] (II) intel(0): Enabled output eDP1
[     4.030] (II) intel(0): Output HDMI1 using monitor section HDMI
[     4.030] (**) intel(0): Option "PreferredMode" "3840x2160_30.00"
[     4.030] (**) intel(0): Option "RightOf" "eDP1"
[     4.030] (II) intel(0): Enabled output HDMI1
[     4.030] (II) intel(0): Output DP1 has no monitor section
[     4.031] (II) intel(0): Enabled output DP1
[     4.031] (II) intel(0): Output HDMI2 has no monitor section
[     4.031] (II) intel(0): Enabled output HDMI2
[     4.031] (II) intel(0): Output DP2 has no monitor section
[     4.031] (II) intel(0): Enabled output DP2
[     4.031] (II) intel(0): Output HDMI3 has no monitor section
[     4.031] (II) intel(0): Enabled output HDMI3
[     4.031] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     4.032] (II) intel(0): Output VIRTUAL1 has no monitor section
[     4.032] (II) intel(0): Enabled output VIRTUAL1
[     4.033] (II) intel(0): EDID for output eDP1
[     4.033] (II) intel(0): Manufacturer: BOE  Model: 6cb  Serial#: 0
[     4.033] (II) intel(0): Year: 2016  Week: 1
[     4.033] (II) intel(0): EDID Version: 1.4
[     4.033] (II) intel(0): Digital Display Input
[     4.033] (II) intel(0): 6 bits per channel
[     4.033] (II) intel(0): Digital interface is DisplayPort
[     4.033] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[     4.033] (II) intel(0): Gamma: 2.20
[     4.033] (II) intel(0): No DPMS capabilities specified
[     4.033] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[     4.033] (II) intel(0): First detailed timing is preferred mode
[     4.033] (II) intel(0): Preferred mode is native pixel format and refresh rate
[     4.033] (II) intel(0): redX: 0.585 redY: 0.366   greenX: 0.350 greenY: 0.579
[     4.033] (II) intel(0): blueX: 0.162 blueY: 0.143   whiteX: 0.312 whiteY: 0.328
[     4.033] (II) intel(0): Manufacturer's mask: 0
[     4.033] (II) intel(0): Supported detailed timing:
[     4.033] (II) intel(0): clock: 151.3 MHz   Image Size:  344 x 194 mm
[     4.033] (II) intel(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2212 h_border: 0
[     4.033] (II) intel(0): v_active: 1080  v_sync: 1083  v_sync_end 1089 v_blanking: 1140 v_border: 0
[     4.033] (II) intel(0): Supported detailed timing:
[     4.033] (II) intel(0): clock: 117.7 MHz   Image Size:  344 x 194 mm
[     4.033] (II) intel(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2190 h_border: 0
[     4.033] (II) intel(0): v_active: 1080  v_sync: 1083  v_sync_end 1089 v_blanking: 1120 v_border: 0
[     4.033] (II) intel(0):  RMJCYNV15N42
[     4.033] (II) intel(0): Unknown vendor-specific block 0
[     4.033] (II) intel(0): EDID (in hex):
[     4.033] (II) intel(0): 	00ffffffffffff0009e5cb0600000000
[     4.033] (II) intel(0): 	011a0104952213780af9a0955d599429
[     4.033] (II) intel(0): 	24505400000001010101010101010101
[     4.033] (II) intel(0): 	0101010101011a3b802471383c403020
[     4.033] (II) intel(0): 	360058c21000001afd2d800e71382840
[     4.033] (II) intel(0): 	3020360058c21000001a000000fe0052
[     4.034] (II) intel(0): 	4d4a4359804e5631354e343200000000
[     4.034] (II) intel(0): 	0000412296001000000a010a202000c8
[     4.034] (II) intel(0): EDID vendor "BOE", prod id 1739
[     4.034] (II) intel(0): Printing DDC gathered Modelines:
[     4.034] (II) intel(0): Modeline "1920x1080"x0.0  151.30  1920 1968 2000 2212  1080 1083 1089 1140 +hsync -vsync (68.4 kHz eP)
[     4.034] (II) intel(0): Modeline "1920x1080"x0.0  117.73  1920 1968 2000 2190  1080 1083 1089 1120 +hsync -vsync (53.8 kHz e)
[     4.034] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "320x180" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "320x180" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "360x202" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "360x202" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "432x243" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "432x243" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "480x270" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "480x270" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "512x288" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "512x288" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "640x360" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "640x360" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "684x384" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "684x384" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "800x450" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "800x450" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "1024x576" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "1024x576" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "1280x720" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "640x400" (doublescan mode not supported)
[     4.034] (II) intel(0): Not using default mode "640x400" (doublescan mode not supported)
[     4.035] (II) intel(0): Not using default mode "700x450" (doublescan mode not supported)
[     4.035] (II) intel(0): Not using default mode "700x450" (doublescan mode not supported)
[     4.035] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[     4.035] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[     4.035] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[     4.035] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[     4.035] (II) intel(0): Not using default mode "1280x800" (doublescan mode not supported)
[     4.035] (II) intel(0): Printing probed modes for output eDP1
[     4.035] (II) intel(0): Modeline "1920x1080"x60.0  151.30  1920 1968 2000 2212  1080 1083 1089 1140 +hsync -vsync (68.4 kHz UeP)
[     4.035] (II) intel(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[     4.035] (II) intel(0): Modeline "1920x1080"x48.0  117.73  1920 1968 2000 2190  1080 1083 1089 1120 +hsync -vsync (53.8 kHz e)
[     4.035] (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[     4.035] (II) intel(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[     4.035] (II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[     4.035] (II) intel(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz)
[     4.035] (II) intel(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[     4.035] (II) intel(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[     4.035] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[     4.035] (II) intel(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[     4.035] (II) intel(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[     4.035] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[     4.035] (II) intel(0): Modeline "1368x768"x60.0   85.86  1368 1440 1584 1800  768 769 772 795 -hsync +vsync (47.7 kHz)
[     4.035] (II) intel(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[     4.035] (II) intel(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[     4.035] (II) intel(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[     4.035] (II) intel(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[     4.035] (II) intel(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[     4.035] (II) intel(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
[     4.035] (II) intel(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[     4.035] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     4.035] (II) intel(0): Modeline "1024x576"x60.0   46.99  1024 1064 1168 1312  576 577 580 597 -hsync +vsync (35.8 kHz)
[     4.035] (II) intel(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[     4.035] (II) intel(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[     4.035] (II) intel(0): Modeline "960x540"x60.0   40.78  960 992 1088 1216  540 541 544 559 -hsync +vsync (33.5 kHz)
[     4.035] (II) intel(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[     4.035] (II) intel(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[     4.035] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     4.035] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     4.035] (II) intel(0): Modeline "864x486"x60.0   32.90  864 888 976 1088  486 487 490 504 -hsync +vsync (30.2 kHz)
[     4.035] (II) intel(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[     4.035] (II) intel(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[     4.035] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     4.035] (II) intel(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[     4.035] (II) intel(0): Modeline "720x405"x60.0   22.18  720 728 800 880  405 406 409 420 -hsync +vsync (25.2 kHz)
[     4.035] (II) intel(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[     4.035] (II) intel(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[     4.035] (II) intel(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[     4.035] (II) intel(0): Modeline "640x360"x60.0   17.19  640 640 704 768  360 361 364 373 -hsync +vsync (22.4 kHz)
[     4.035] (II) intel(0): EDID for output DP1
[     4.035] (II) intel(0): EDID for output DP2
[     4.063] (II) intel(0): EDID for output HDMI1
[     4.063] (II) intel(0): Manufacturer: AOC  Model: 3277  Serial#: 676
[     4.063] (II) intel(0): Year: 2018  Week: 37
[     4.063] (II) intel(0): EDID Version: 1.3
[     4.063] (II) intel(0): Digital Display Input
[     4.063] (II) intel(0): Max Image Size [cm]: horiz.: 70  vert.: 39
[     4.063] (II) intel(0): Gamma: 2.20
[     4.063] (II) intel(0): DPMS capabilities: Off
[     4.063] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[     4.063] (II) intel(0): First detailed timing is preferred mode
[     4.063] (II) intel(0): redX: 0.685 redY: 0.310   greenX: 0.260 greenY: 0.685
[     4.063] (II) intel(0): blueX: 0.152 blueY: 0.055   whiteX: 0.313 whiteY: 0.329
[     4.063] (II) intel(0): Supported established timings:
[     4.063] (II) intel(0): 720x400@70Hz
[     4.063] (II) intel(0): 640x480@60Hz
[     4.064] (II) intel(0): 640x480@67Hz
[     4.064] (II) intel(0): 640x480@72Hz
[     4.064] (II) intel(0): 640x480@75Hz
[     4.064] (II) intel(0): 800x600@60Hz
[     4.064] (II) intel(0): 800x600@75Hz
[     4.064] (II) intel(0): 1024x768@60Hz
[     4.064] (II) intel(0): 1024x768@75Hz
[     4.064] (II) intel(0): 1280x1024@75Hz
[     4.064] (II) intel(0): Manufacturer's mask: 0
[     4.064] (II) intel(0): Supported standard timings:
[     4.064] (II) intel(0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[     4.064] (II) intel(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     4.064] (II) intel(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[     4.064] (II) intel(0): #3: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[     4.064] (II) intel(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
[     4.064] (II) intel(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[     4.064] (II) intel(0): #6: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[     4.064] (II) intel(0): Supported detailed timing:
[     4.064] (II) intel(0): clock: 533.2 MHz   Image Size:  698 x 393 mm
[     4.064] (II) intel(0): h_active: 3840  h_sync: 3888  h_sync_end 3920 h_blank_end 4000 h_border: 0
[     4.064] (II) intel(0): v_active: 2160  v_sync: 2163  v_sync_end 2168 v_blanking: 2222 v_border: 0
[     4.064] (II) intel(0): Supported detailed timing:
[     4.064] (II) intel(0): clock: 262.8 MHz   Image Size:  698 x 393 mm
[     4.064] (II) intel(0): h_active: 3840  h_sync: 3888  h_sync_end 3920 h_blank_end 4000 h_border: 0
[     4.064] (II) intel(0): v_active: 2160  v_sync: 2163  v_sync_end 2168 v_blanking: 2191 v_border: 0
[     4.064] (II) intel(0): Monitor name: U3277WB
[     4.064] (II) intel(0): Ranges: V min: 23 V max: 80 Hz, H min: 30 H max: 160 kHz, PixClock max 605 MHz
[     4.064] (II) intel(0): Supported detailed timing:
[     4.064] (II) intel(0): clock: 74.2 MHz   Image Size:  698 x 393 mm
[     4.064] (II) intel(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[     4.064] (II) intel(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[     4.064] (II) intel(0): Supported detailed timing:
[     4.064] (II) intel(0): clock: 27.0 MHz   Image Size:  698 x 393 mm
[     4.064] (II) intel(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[     4.064] (II) intel(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[     4.064] (II) intel(0): Supported detailed timing:
[     4.064] (II) intel(0): clock: 277.2 MHz   Image Size:  698 x 393 mm
[     4.064] (II) intel(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[     4.064] (II) intel(0): v_active: 2160  v_sync: 2163  v_sync_end 2173 v_blanking: 2222 v_border: 0
[     4.064] (II) intel(0): Supported detailed timing:
[     4.064] (II) intel(0): clock: 297.0 MHz   Image Size:  698 x 393 mm
[     4.064] (II) intel(0): h_active: 3840  h_sync: 4016  h_sync_end 4104 h_blank_end 4400 h_border: 0
[     4.064] (II) intel(0): v_active: 2160  v_sync: 2168  v_sync_end 2178 v_blanking: 2250 v_border: 0
[     4.064] (II) intel(0): Number of EDID sections to follow: 1
[     4.064] (II) intel(0): EDID (in hex):
[     4.064] (II) intel(0): 	00ffffffffffff0005e37732a4020000
[     4.064] (II) intel(0): 	251c0103804627782a5905af4f42af27
[     4.064] (II) intel(0): 	0e5054bd4b00d1c081808140950f9500
[     4.064] (II) intel(0): 	b30081c001014dd000a0f0703e803020
[     4.064] (II) intel(0): 	3500ba892100001aa36600a0f0701f80
[     4.064] (II) intel(0): 	30203500ba892100001a000000fc0055
[     4.064] (II) intel(0): 	3332373757420a2020202020000000fd
[     4.064] (II) intel(0): 	0017501ea03c000a2020202020200132
[     4.064] (II) intel(0): 	020333f14c9004031f1301125d5e5f60
[     4.064] (II) intel(0): 	6123090707830100006d030c00100038
[     4.064] (II) intel(0): 	7820006001020367d85dc401788003e3
[     4.064] (II) intel(0): 	0f000c011d007251d01e206e285500ba
[     4.064] (II) intel(0): 	892100001e8c0ad08a20e02d10103e96
[     4.064] (II) intel(0): 	00ba89210000184d6c80a070703e8030
[     4.064] (II) intel(0): 	203a00ba892100001a04740030f2705a
[     4.064] (II) intel(0): 	80b0588a00ba892100001a000000009e
[     4.064] (--) intel(0): HDMI max TMDS frequency 600000KHz
[     4.065] (II) intel(0): Printing probed modes for output HDMI1
[     4.065] (II) intel(0): Modeline "3840x2160_30.00"x30.0  338.75  3840 4080 4488 5136  2160 2163 2168 2200 -hsync +vsync (66.0 kHz UP)
[     4.065] (II) intel(0): Modeline "3840x2160_60.00"x60.0  712.75  3840 4160 4576 5312  2160 2163 2168 2237 -hsync +vsync (134.2 kHz)
[     4.065] (II) intel(0): Modeline "3840x2160"x30.0  297.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync -vsync (67.5 kHz e)
[     4.065] (II) intel(0): Modeline "3840x2160"x30.0  297.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[     4.065] (II) intel(0): Modeline "3840x2160"x25.0  297.00  3840 4896 4984 5280  2160 2168 2178 2250 +hsync +vsync (56.2 kHz e)
[     4.065] (II) intel(0): Modeline "3840x2160"x24.0  297.00  3840 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (54.0 kHz e)
[     4.065] (II) intel(0): Modeline "3840x2160"x30.0  296.70  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.4 kHz e)
[     4.065] (II) intel(0): Modeline "3840x2160"x24.0  296.70  3840 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (53.9 kHz e)
[     4.065] (II) intel(0): Modeline "3840x2160"x30.0  262.75  3840 3888 3920 4000  2160 2163 2168 2191 +hsync -vsync (65.7 kHz e)
[     4.065] (II) intel(0): Modeline "1920x2160"x60.0  277.25  1920 1968 2000 2080  2160 2163 2173 2222 +hsync -vsync (133.3 kHz e)
[     4.065] (II) intel(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 -hsync -vsync (67.5 kHz e)
[     4.065] (II) intel(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[     4.065] (II) intel(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[     4.065] (II) intel(0): Modeline "1920x1080"x60.0  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[     4.065] (II) intel(0): Modeline "1680x1050"x60.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[     4.065] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     4.065] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[     4.065] (II) intel(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[     4.065] (II) intel(0): Modeline "1440x900"x60.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[     4.065] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[     4.065] (II) intel(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[     4.065] (II) intel(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[     4.065] (II) intel(0): Modeline "1280x720"x60.0   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[     4.065] (II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     4.065] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     4.065] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     4.065] (II) intel(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     4.065] (II) intel(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[     4.065] (II) intel(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[     4.065] (II) intel(0): Modeline "720x480"x60.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[     4.065] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     4.065] (II) intel(0): Modeline "640x480"x73.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     4.065] (II) intel(0): Modeline "640x480"x67.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     4.065] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     4.065] (II) intel(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     4.065] (II) intel(0): Modeline "720x400"x70.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     4.088] (II) intel(0): EDID for output HDMI2
[     4.094] (II) intel(0): EDID for output HDMI3
[     4.094] (II) intel(0): EDID for output VIRTUAL1
[     4.094] (II) intel(0): Output eDP1 connected
[     4.094] (II) intel(0): Output DP1 disconnected
[     4.094] (II) intel(0): Output DP2 disconnected
[     4.094] (II) intel(0): Output HDMI1 connected
[     4.094] (II) intel(0): Output HDMI2 disconnected
[     4.094] (II) intel(0): Output HDMI3 disconnected
[     4.094] (II) intel(0): Output VIRTUAL1 disconnected
[     4.094] (II) intel(0): Using user preference for initial modes
[     4.094] (II) intel(0): Output eDP1 using initial mode 1920x1080 +0+0
[     4.094] (II) intel(0): Output HDMI1 using initial mode 3840x2160_30.00 +0+0
[     4.094] (==) intel(0): TearFree enabled
[     4.094] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[     4.094] (**) intel(0): Display dimensions: (340, 190) mm
[     4.094] (**) intel(0): DPI set to (430, 288)
[     4.094] (II) Loading sub module "dri3"
[     4.094] (II) LoadModule: "dri3"
[     4.094] (II) Module "dri3" already built-in
[     4.094] (II) Loading sub module "dri2"
[     4.094] (II) LoadModule: "dri2"
[     4.094] (II) Module "dri2" already built-in
[     4.094] (II) Loading sub module "present"
[     4.094] (II) LoadModule: "present"
[     4.094] (II) Module "present" already built-in
[     4.096] (II) intel(0): SNA initialized with Coffeelake (gen9) backend
[     4.096] (==) intel(0): Backing store enabled
[     4.096] (==) intel(0): Silken mouse disabled
[     4.096] (II) intel(0): HW Cursor enabled
[     4.097] (==) intel(0): DPMS enabled
[     4.097] (==) intel(0): Display hotplug detection enabled
[     4.097] (II) intel(0): [DRI2] Setup complete
[     4.097] (II) intel(0): [DRI2]   DRI driver: i965
[     4.097] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     4.097] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[     4.097] (II) intel(0): hardware support for Present enabled
[     4.098] (WW) intel(0): Option "ModeValidation" is not used
[     4.098] (II) Initializing extension Generic Event Extension
[     4.098] (II) Initializing extension SHAPE
[     4.098] (II) Initializing extension MIT-SHM
[     4.098] (II) Initializing extension XInputExtension
[     4.098] (II) Initializing extension XTEST
[     4.098] (II) Initializing extension BIG-REQUESTS
[     4.098] (II) Initializing extension SYNC
[     4.098] (II) Initializing extension XKEYBOARD
[     4.099] (II) Initializing extension XC-MISC
[     4.099] (II) Initializing extension SECURITY
[     4.099] (II) Initializing extension XFIXES
[     4.099] (II) Initializing extension RENDER
[     4.099] (II) Initializing extension RANDR
[     4.099] (II) Initializing extension COMPOSITE
[     4.099] (II) Initializing extension DAMAGE
[     4.099] (II) Initializing extension MIT-SCREEN-SAVER
[     4.099] (II) Initializing extension DOUBLE-BUFFER
[     4.099] (II) Initializing extension RECORD
[     4.100] (II) Initializing extension DPMS
[     4.100] (II) Initializing extension Present
[     4.100] (II) Initializing extension DRI3
[     4.100] (II) Initializing extension X-Resource
[     4.100] (II) Initializing extension XVideo
[     4.100] (II) Initializing extension XVideo-MotionCompensation
[     4.100] (II) Initializing extension GLX
[     4.135] (II) AIGLX: Loaded and initialized i965
[     4.135] (II) GLX: Initialized DRI2 GL provider for screen 0
[     4.135] (II) Initializing extension XFree86-VidModeExtension
[     4.135] (II) Initializing extension XFree86-DGA
[     4.136] (II) Initializing extension XFree86-DRI
[     4.136] (II) Initializing extension DRI2
[     4.150] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     4.159] (II) intel(0): switch to mode 3840x2160@30.0 on HDMI1 using pipe 1, position (1920, 0), rotation normal, reflection none
[     4.167] (II) intel(0): Setting screen physical size to 1524 x 571
[     4.210] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     4.210] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.210] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     4.210] (II) LoadModule: "evdev"
[     4.211] (WW) Warning, couldn't open module evdev
[     4.211] (EE) Failed to load module "evdev" (module does not exist, 0)
[     4.211] (EE) No input driver matching `evdev'
[     4.211] (II) Falling back to input driver `libinput'
[     4.211] (II) LoadModule: "libinput"
[     4.211] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     4.215] (II) Module libinput: vendor="X.Org Foundation"
[     4.215] 	compiled for 1.20.3, module version = 0.28.2
[     4.215] 	Module class: X.Org XInput Driver
[     4.215] 	ABI class: X.Org XInput driver, version 24.1
[     4.215] (II) Using input driver 'libinput' for 'Power Button'
[     4.215] (**) Power Button: always reports core events
[     4.215] (**) Option "Device" "/dev/input/event3"
[     4.215] (**) Option "_source" "server/udev"
[     4.222] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     4.222] (II) event3  - Power Button: device is a keyboard
[     4.222] (II) event3  - Power Button: device removed
[     4.239] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[     4.239] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     4.240] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     4.240] (II) event3  - Power Button: device is a keyboard
[     4.240] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[     4.240] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     4.240] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     4.240] (II) LoadModule: "evdev"
[     4.240] (WW) Warning, couldn't open module evdev
[     4.240] (EE) Failed to load module "evdev" (module does not exist, 0)
[     4.240] (EE) No input driver matching `evdev'
[     4.240] (II) Falling back to input driver `libinput'
[     4.240] (II) Using input driver 'libinput' for 'Video Bus'
[     4.240] (**) Video Bus: always reports core events
[     4.240] (**) Option "Device" "/dev/input/event9"
[     4.240] (**) Option "_source" "server/udev"
[     4.241] (II) event9  - Video Bus: is tagged by udev as: Keyboard
[     4.241] (II) event9  - Video Bus: device is a keyboard
[     4.241] (II) event9  - Video Bus: device removed
[     4.309] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9"
[     4.309] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     4.312] (II) event9  - Video Bus: is tagged by udev as: Keyboard
[     4.312] (II) event9  - Video Bus: device is a keyboard
[     4.313] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     4.313] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.313] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     4.313] (II) LoadModule: "evdev"
[     4.313] (WW) Warning, couldn't open module evdev
[     4.313] (EE) Failed to load module "evdev" (module does not exist, 0)
[     4.313] (EE) No input driver matching `evdev'
[     4.313] (II) Falling back to input driver `libinput'
[     4.313] (II) Using input driver 'libinput' for 'Power Button'
[     4.313] (**) Power Button: always reports core events
[     4.313] (**) Option "Device" "/dev/input/event1"
[     4.313] (**) Option "_source" "server/udev"
[     4.315] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     4.315] (II) event1  - Power Button: device is a keyboard
[     4.315] (II) event1  - Power Button: device removed
[     4.349] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     4.349] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     4.350] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     4.350] (II) event1  - Power Button: device is a keyboard
[     4.350] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     4.350] (II) No input driver specified, ignoring this device.
[     4.350] (II) This device may have been added with another device file.
[     4.351] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[     4.351] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     4.351] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     4.351] (II) LoadModule: "evdev"
[     4.351] (WW) Warning, couldn't open module evdev
[     4.351] (EE) Failed to load module "evdev" (module does not exist, 0)
[     4.351] (EE) No input driver matching `evdev'
[     4.351] (II) Falling back to input driver `libinput'
[     4.351] (II) Using input driver 'libinput' for 'Sleep Button'
[     4.351] (**) Sleep Button: always reports core events
[     4.351] (**) Option "Device" "/dev/input/event2"
[     4.351] (**) Option "_source" "server/udev"
[     4.351] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[     4.352] (II) event2  - Sleep Button: device is a keyboard
[     4.352] (II) event2  - Sleep Button: device removed
[     4.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[     4.376] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     4.378] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[     4.378] (II) event2  - Sleep Button: device is a keyboard
[     4.380] (II) config/udev: Adding input device Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard (/dev/input/event10)
[     4.380] (**) Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[     4.380] (**) Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[     4.380] (II) LoadModule: "evdev"
[     4.381] (WW) Warning, couldn't open module evdev
[     4.381] (EE) Failed to load module "evdev" (module does not exist, 0)
[     4.381] (EE) No input driver matching `evdev'
[     4.381] (II) Falling back to input driver `libinput'
[     4.381] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard'
[     4.381] (**) Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard: always reports core events
[     4.381] (**) Option "Device" "/dev/input/event10"
[     4.381] (**) Option "_source" "server/udev"
[     4.385] (II) event10 - Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[     4.385] (II) event10 - Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard: device is a keyboard
[     4.385] (II) event10 - Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard: device removed
[     4.416] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0951:16D2.0001/input/input10/event10"
[     4.416] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard" (type: KEYBOARD, id 10)
[     4.420] (II) event10 - Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[     4.420] (II) event10 - Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard: device is a keyboard
[     4.422] (II) config/udev: Adding input device Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control (/dev/input/event11)
[     4.422] (**) Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[     4.422] (**) Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
[     4.422] (II) LoadModule: "evdev"
[     4.423] (WW) Warning, couldn't open module evdev
[     4.423] (EE) Failed to load module "evdev" (module does not exist, 0)
[     4.423] (EE) No input driver matching `evdev'
[     4.423] (II) Falling back to input driver `libinput'
[     4.423] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control'
[     4.423] (**) Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control: always reports core events
[     4.423] (**) Option "Device" "/dev/input/event11"
[     4.423] (**) Option "_source" "server/udev"
[     4.426] (II) event11 - Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[     4.426] (II) event11 - Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control: device is a keyboard
[     4.427] (II) event11 - Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control: device removed
[     4.456] (II) libinput: Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control: needs a virtual subdevice
[     4.456] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0951:16D2.0002/input/input12/event11"
[     4.456] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control" (type: MOUSE, id 11)
[     4.456] (**) Option "AccelerationScheme" "none"
[     4.456] (**) Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control: (accel) selected scheme none/0
[     4.456] (**) Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control: (accel) acceleration factor: 2.000
[     4.456] (**) Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control: (accel) acceleration threshold: 4
[     4.460] (II) event11 - Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[     4.460] (II) event11 - Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control: device is a keyboard
[     4.462] (II) config/udev: Adding input device Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard (/dev/input/event12)
[     4.462] (**) Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[     4.462] (**) Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[     4.462] (II) LoadModule: "evdev"
[     4.463] (WW) Warning, couldn't open module evdev
[     4.463] (EE) Failed to load module "evdev" (module does not exist, 0)
[     4.463] (EE) No input driver matching `evdev'
[     4.463] (II) Falling back to input driver `libinput'
[     4.463] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard'
[     4.463] (**) Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard: always reports core events
[     4.463] (**) Option "Device" "/dev/input/event12"
[     4.463] (**) Option "_source" "server/udev"
[     4.466] (II) event12 - Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[     4.466] (II) event12 - Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard: device is a keyboard
[     4.467] (II) event12 - Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard: device removed
[     4.522] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:0951:16D2.0003/input/input13/event12"
[     4.523] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard" (type: KEYBOARD, id 12)
[     4.527] (II) event12 - Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[     4.527] (II) event12 - Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard: device is a keyboard
[     4.529] (II) config/udev: Adding input device Logitech MX Master 2S (/dev/input/event15)
[     4.529] (**) Logitech MX Master 2S: Applying InputClass "libinput pointer catchall"
[     4.529] (**) Logitech MX Master 2S: Applying InputClass "libinput keyboard catchall"
[     4.529] (**) Logitech MX Master 2S: Applying InputClass "evdev pointer catchall"
[     4.529] (**) Logitech MX Master 2S: Applying InputClass "evdev keyboard catchall"
[     4.529] (II) LoadModule: "evdev"
[     4.530] (WW) Warning, couldn't open module evdev
[     4.530] (EE) Failed to load module "evdev" (module does not exist, 0)
[     4.530] (EE) No input driver matching `evdev'
[     4.530] (II) Falling back to input driver `libinput'
[     4.530] (II) Using input driver 'libinput' for 'Logitech MX Master 2S'
[     4.530] (**) Logitech MX Master 2S: always reports core events
[     4.530] (**) Option "Device" "/dev/input/event15"
[     4.530] (**) Option "_source" "server/udev"
[     4.533] (II) event15 - Logitech MX Master 2S: is tagged by udev as: Keyboard Mouse
[     4.534] (II) event15 - Logitech MX Master 2S: device is a pointer
[     4.534] (II) event15 - Logitech MX Master 2S: device is a keyboard
[     4.534] (II) event15 - Logitech MX Master 2S: device removed
[     4.589] (II) libinput: Logitech MX Master 2S: needs a virtual subdevice
[     4.589] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0006/0003:046D:4069.0008/input/input33/event15"
[     4.589] (II) XINPUT: Adding extended input device "Logitech MX Master 2S" (type: MOUSE, id 13)
[     4.590] (**) Option "AccelerationScheme" "none"
[     4.590] (**) Logitech MX Master 2S: (accel) selected scheme none/0
[     4.590] (**) Logitech MX Master 2S: (accel) acceleration factor: 2.000
[     4.590] (**) Logitech MX Master 2S: (accel) acceleration threshold: 4
[     4.594] (II) event15 - Logitech MX Master 2S: is tagged by udev as: Keyboard Mouse
[     4.594] (II) event15 - Logitech MX Master 2S: device is a pointer
[     4.594] (II) event15 - Logitech MX Master 2S: device is a keyboard
[     4.596] (II) config/udev: Adding input device Logitech MX Master 2S (/dev/input/mouse2)
[     4.596] (II) No input driver specified, ignoring this device.
[     4.596] (II) This device may have been added with another device file.
[     4.597] (II) config/udev: Adding input device DELL0819:00 044E:121F Mouse (/dev/input/event14)
[     4.597] (**) DELL0819:00 044E:121F Mouse: Applying InputClass "libinput pointer catchall"
[     4.597] (**) DELL0819:00 044E:121F Mouse: Applying InputClass "evdev pointer catchall"
[     4.597] (II) LoadModule: "evdev"
[     4.598] (WW) Warning, couldn't open module evdev
[     4.598] (EE) Failed to load module "evdev" (module does not exist, 0)
[     4.598] (EE) No input driver matching `evdev'
[     4.598] (II) Falling back to input driver `libinput'
[     4.598] (II) Using input driver 'libinput' for 'DELL0819:00 044E:121F Mouse'
[     4.598] (**) DELL0819:00 044E:121F Mouse: always reports core events
[     4.598] (**) Option "Device" "/dev/input/event14"
[     4.598] (**) Option "_source" "server/udev"
[     4.601] (II) event14 - DELL0819:00 044E:121F Mouse: is tagged by udev as: Mouse
[     4.601] (II) event14 - DELL0819:00 044E:121F Mouse: device is a pointer
[     4.601] (II) event14 - DELL0819:00 044E:121F Mouse: device removed
[     4.662] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-9/i2c-DELL0819:00/0018:044E:121F.0007/input/input30/event14"
[     4.662] (II) XINPUT: Adding extended input device "DELL0819:00 044E:121F Mouse" (type: MOUSE, id 14)
[     4.662] (**) Option "AccelerationScheme" "none"
[     4.662] (**) DELL0819:00 044E:121F Mouse: (accel) selected scheme none/0
[     4.662] (**) DELL0819:00 044E:121F Mouse: (accel) acceleration factor: 2.000
[     4.662] (**) DELL0819:00 044E:121F Mouse: (accel) acceleration threshold: 4
[     4.663] (II) event14 - DELL0819:00 044E:121F Mouse: is tagged by udev as: Mouse
[     4.663] (II) event14 - DELL0819:00 044E:121F Mouse: device is a pointer
[     4.663] (II) config/udev: Adding input device DELL0819:00 044E:121F Mouse (/dev/input/mouse0)
[     4.663] (II) No input driver specified, ignoring this device.
[     4.663] (II) This device may have been added with another device file.
[     4.663] (II) config/udev: Adding input device DELL0819:00 044E:121F Touchpad (/dev/input/event24)
[     4.663] (**) DELL0819:00 044E:121F Touchpad: Applying InputClass "libinput touchpad catchall"
[     4.663] (**) DELL0819:00 044E:121F Touchpad: Applying InputClass "evdev touchpad catchall"
[     4.663] (**) DELL0819:00 044E:121F Touchpad: Applying InputClass "Synaptics touchpads"
[     4.663] (II) LoadModule: "synaptics"
[     4.664] (WW) Warning, couldn't open module synaptics
[     4.664] (EE) Failed to load module "synaptics" (module does not exist, 0)
[     4.664] (EE) No input driver matching `synaptics'
[     4.664] (II) Falling back to input driver `libinput'
[     4.664] (II) Using input driver 'libinput' for 'DELL0819:00 044E:121F Touchpad'
[     4.664] (**) DELL0819:00 044E:121F Touchpad: always reports core events
[     4.664] (**) Option "Device" "/dev/input/event24"
[     4.664] (**) Option "_source" "server/udev"
[     4.664] (II) event24 - DELL0819:00 044E:121F Touchpad: is tagged by udev as: Touchpad
[     4.665] (II) event24 - DELL0819:00 044E:121F Touchpad: device is a touchpad
[     4.665] (II) event24 - DELL0819:00 044E:121F Touchpad: device removed
[     4.736] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-9/i2c-DELL0819:00/0018:044E:121F.0007/input/input31/event24"
[     4.736] (II) XINPUT: Adding extended input device "DELL0819:00 044E:121F Touchpad" (type: TOUCHPAD, id 15)
[     4.737] (**) Option "AccelerationScheme" "none"
[     4.737] (**) DELL0819:00 044E:121F Touchpad: (accel) selected scheme none/0
[     4.737] (**) DELL0819:00 044E:121F Touchpad: (accel) acceleration factor: 2.000
[     4.737] (**) DELL0819:00 044E:121F Touchpad: (accel) acceleration threshold: 4
[     4.738] (II) event24 - DELL0819:00 044E:121F Touchpad: is tagged by udev as: Touchpad
[     4.740] (II) event24 - DELL0819:00 044E:121F Touchpad: device is a touchpad
[     4.741] (II) config/udev: Adding input device DELL0819:00 044E:121F Touchpad (/dev/input/mouse1)
[     4.741] (**) DELL0819:00 044E:121F Touchpad: Applying InputClass "Synaptics touchpads"
[     4.741] (II) LoadModule: "synaptics"
[     4.741] (WW) Warning, couldn't open module synaptics
[     4.741] (EE) Failed to load module "synaptics" (module does not exist, 0)
[     4.741] (EE) No input driver matching `synaptics'
[     4.741] (II) Falling back to input driver `libinput'
[     4.741] (II) Using input driver 'libinput' for 'DELL0819:00 044E:121F Touchpad'
[     4.741] (**) DELL0819:00 044E:121F Touchpad: always reports core events
[     4.741] (**) Option "Device" "/dev/input/mouse1"
[     4.741] (**) Option "_source" "server/udev"
[     4.829] (II) mouse1  - failed to create input device '/dev/input/mouse1'.
[     4.829] (EE) libinput: DELL0819:00 044E:121F Touchpad: Failed to create a device for /dev/input/mouse1
[     4.829] (EE) PreInit returned 2 for "DELL0819:00 044E:121F Touchpad"
[     4.829] (II) UnloadModule: "libinput"
[     4.831] (II) config/udev: Adding input device DELL0819:00 044E:121F UNKNOWN (/dev/input/event25)
[     4.831] (**) DELL0819:00 044E:121F UNKNOWN: Applying InputClass "libinput keyboard catchall"
[     4.831] (**) DELL0819:00 044E:121F UNKNOWN: Applying InputClass "evdev keyboard catchall"
[     4.831] (II) LoadModule: "evdev"
[     4.831] (WW) Warning, couldn't open module evdev
[     4.831] (EE) Failed to load module "evdev" (module does not exist, 0)
[     4.831] (EE) No input driver matching `evdev'
[     4.831] (II) Falling back to input driver `libinput'
[     4.831] (II) Using input driver 'libinput' for 'DELL0819:00 044E:121F UNKNOWN'
[     4.831] (**) DELL0819:00 044E:121F UNKNOWN: always reports core events
[     4.831] (**) Option "Device" "/dev/input/event25"
[     4.831] (**) Option "_source" "server/udev"
[     4.834] (II) event25 - DELL0819:00 044E:121F UNKNOWN: is tagged by udev as: Keyboard
[     4.835] (II) event25 - DELL0819:00 044E:121F UNKNOWN: device is a keyboard
[     4.835] (II) event25 - DELL0819:00 044E:121F UNKNOWN: device removed
[     4.909] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-9/i2c-DELL0819:00/0018:044E:121F.0007/input/input32/event25"
[     4.909] (II) XINPUT: Adding extended input device "DELL0819:00 044E:121F UNKNOWN" (type: KEYBOARD, id 16)
[     4.910] (II) event25 - DELL0819:00 044E:121F UNKNOWN: is tagged by udev as: Keyboard
[     4.910] (II) event25 - DELL0819:00 044E:121F UNKNOWN: device is a keyboard
[     4.910] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[     4.910] (II) No input driver specified, ignoring this device.
[     4.910] (II) This device may have been added with another device file.
[     4.910] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event16)
[     4.910] (II) No input driver specified, ignoring this device.
[     4.910] (II) This device may have been added with another device file.
[     4.911] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event18)
[     4.911] (II) No input driver specified, ignoring this device.
[     4.911] (II) This device may have been added with another device file.
[     4.911] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event20)
[     4.911] (II) No input driver specified, ignoring this device.
[     4.911] (II) This device may have been added with another device file.
[     4.911] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event21)
[     4.911] (II) No input driver specified, ignoring this device.
[     4.911] (II) This device may have been added with another device file.
[     4.911] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event22)
[     4.911] (II) No input driver specified, ignoring this device.
[     4.911] (II) This device may have been added with another device file.
[     4.912] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event23)
[     4.912] (II) No input driver specified, ignoring this device.
[     4.912] (II) This device may have been added with another device file.
[     4.912] (II) config/udev: Adding input device Intel HID events (/dev/input/event5)
[     4.912] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[     4.912] (**) Intel HID events: Applying InputClass "evdev keyboard catchall"
[     4.912] (II) LoadModule: "evdev"
[     4.912] (WW) Warning, couldn't open module evdev
[     4.912] (EE) Failed to load module "evdev" (module does not exist, 0)
[     4.912] (EE) No input driver matching `evdev'
[     4.912] (II) Falling back to input driver `libinput'
[     4.912] (II) Using input driver 'libinput' for 'Intel HID events'
[     4.912] (**) Intel HID events: always reports core events
[     4.912] (**) Option "Device" "/dev/input/event5"
[     4.912] (**) Option "_source" "server/udev"
[     4.912] (II) event5  - Intel HID events: is tagged by udev as: Keyboard
[     4.912] (II) event5  - Intel HID events: device is a keyboard
[     4.912] (II) event5  - Intel HID events: device removed
[     4.962] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input5/event5"
[     4.962] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 17)
[     4.963] (II) event5  - Intel HID events: is tagged by udev as: Keyboard
[     4.963] (II) event5  - Intel HID events: device is a keyboard
[     4.963] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event6)
[     4.963] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[     4.963] (**) Intel HID 5 button array: Applying InputClass "evdev keyboard catchall"
[     4.963] (II) LoadModule: "evdev"
[     4.964] (WW) Warning, couldn't open module evdev
[     4.964] (EE) Failed to load module "evdev" (module does not exist, 0)
[     4.964] (EE) No input driver matching `evdev'
[     4.964] (II) Falling back to input driver `libinput'
[     4.964] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[     4.964] (**) Intel HID 5 button array: always reports core events
[     4.964] (**) Option "Device" "/dev/input/event6"
[     4.964] (**) Option "_source" "server/udev"
[     4.964] (II) event6  - Intel HID 5 button array: is tagged by udev as: Keyboard
[     4.964] (II) event6  - Intel HID 5 button array: device is a keyboard
[     4.964] (II) event6  - Intel HID 5 button array: device removed
[     4.989] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input6/event6"
[     4.989] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 18)
[     4.990] (II) event6  - Intel HID 5 button array: is tagged by udev as: Keyboard
[     4.990] (II) event6  - Intel HID 5 button array: device is a keyboard
[     4.991] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event8)
[     4.991] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     4.991] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     4.991] (II) LoadModule: "evdev"
[     4.991] (WW) Warning, couldn't open module evdev
[     4.991] (EE) Failed to load module "evdev" (module does not exist, 0)
[     4.991] (EE) No input driver matching `evdev'
[     4.991] (II) Falling back to input driver `libinput'
[     4.991] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[     4.991] (**) Dell WMI hotkeys: always reports core events
[     4.991] (**) Option "Device" "/dev/input/event8"
[     4.991] (**) Option "_source" "server/udev"
[     4.992] (II) event8  - Dell WMI hotkeys: is tagged by udev as: Keyboard
[     4.992] (II) event8  - Dell WMI hotkeys: device is a keyboard
[     4.992] (II) event8  - Dell WMI hotkeys: device removed
[     5.056] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:03/wmi_bus/wmi_bus-PNP0C14:03/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input8/event8"
[     5.056] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 19)
[     5.059] (II) event8  - Dell WMI hotkeys: is tagged by udev as: Keyboard
[     5.059] (II) event8  - Dell WMI hotkeys: device is a keyboard
[     5.061] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[     5.061] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     5.061] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     5.061] (II) LoadModule: "evdev"
[     5.061] (WW) Warning, couldn't open module evdev
[     5.061] (EE) Failed to load module "evdev" (module does not exist, 0)
[     5.061] (EE) No input driver matching `evdev'
[     5.061] (II) Falling back to input driver `libinput'
[     5.061] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     5.061] (**) AT Translated Set 2 keyboard: always reports core events
[     5.061] (**) Option "Device" "/dev/input/event4"
[     5.061] (**) Option "_source" "server/udev"
[     5.062] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     5.062] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[     5.062] (II) event4  - AT Translated Set 2 keyboard: device removed
[     5.109] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[     5.109] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 20)
[     5.109] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     5.109] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[     5.110] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[     5.110] (II) No input driver specified, ignoring this device.
[     5.110] (II) This device may have been added with another device file.
[     5.131] (EE) intel(0): failed to set mode: Invalid argument [22]
[     5.158] (--) intel(0): HDMI max TMDS frequency 600000KHz
[     5.158] (**) Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[     5.158] (**) Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
[     5.158] (II) LoadModule: "evdev"
[     5.158] (WW) Warning, couldn't open module evdev
[     5.158] (EE) Failed to load module "evdev" (module does not exist, 0)
[     5.158] (EE) No input driver matching `evdev'
[     5.158] (II) Falling back to input driver `libinput'
[     5.158] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control'
[     5.158] (**) Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control: always reports core events
[     5.158] (**) Option "Device" "/dev/input/event11"
[     5.158] (**) Option "_source" "_driver/libinput"
[     5.158] (II) libinput: Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control: is a virtual subdevice
[     5.158] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0951:16D2.0002/input/input12/event11"
[     5.158] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard Consumer Control" (type: KEYBOARD, id 21)
[     5.158] (**) Logitech MX Master 2S: Applying InputClass "libinput pointer catchall"
[     5.158] (**) Logitech MX Master 2S: Applying InputClass "libinput keyboard catchall"
[     5.158] (**) Logitech MX Master 2S: Applying InputClass "evdev pointer catchall"
[     5.158] (**) Logitech MX Master 2S: Applying InputClass "evdev keyboard catchall"
[     5.158] (II) LoadModule: "evdev"
[     5.158] (WW) Warning, couldn't open module evdev
[     5.158] (EE) Failed to load module "evdev" (module does not exist, 0)
[     5.158] (EE) No input driver matching `evdev'
[     5.158] (II) Falling back to input driver `libinput'
[     5.158] (II) Using input driver 'libinput' for 'Logitech MX Master 2S'
[     5.158] (**) Logitech MX Master 2S: always reports core events
[     5.158] (**) Option "Device" "/dev/input/event15"
[     5.158] (**) Option "_source" "_driver/libinput"
[     5.158] (II) libinput: Logitech MX Master 2S: is a virtual subdevice
[     5.158] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0006/0003:046D:4069.0008/input/input33/event15"
[     5.158] (II) XINPUT: Adding extended input device "Logitech MX Master 2S" (type: KEYBOARD, id 22)

When i try to boot with this config, my monitor's picture freeze at startup. The OS can handle the monitor, e.g.: i can move window to it, i3wm give a desktop to it.

Xorg.0.log shows nothing, no error... Dmesg too...

What i am missing?

Thanks,
    g0rbe

Last edited by g0rbe (2019-05-13 20:54:59)

Offline

#2 2019-05-08 10:37:15

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,509

Re: [SOLVED] Monitor with HDMI freeze at startup

You'll need a "HDMI Premium High Speed" cable (unfortunately that marketing bullshit is the relevant version tag…)
The supported resolution would be typical for 1.4b or "HDMI High Speed" (same problem) cables.

You can also try to create a modeline w/ reduced blanking (cvt -r), but if there's no actual 2.0 support or your cable isn't "premium" (i can't believe I'm writing this…) you'd end up driving the HW out of spec even then.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2019-05-08 20:24:46

g0rbe
Member
Registered: 2019-01-07
Posts: 5

Re: [SOLVED] Monitor with HDMI freeze at startup

Thanks for your reply!

I found a "high speed" hdmi cabel (gold plated, with ethernet support) but no luck. Reduced blanking failed too.

My laptop is a new Latitude, so i am am thinking about an usb-c -> DisplayPort cable. Could it be a possible solution?

Offline

#4 2019-05-08 20:33:53

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,509

Re: [SOLVED] Monitor with HDMI freeze at startup

Gold won't help, you need a cable tagged "*premium* high speed" - or DP 1.2 w/ 4 links or 1.3 /2 links and usb 3.1

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2019-05-13 08:03:04

g0rbe
Member
Registered: 2019-01-07
Posts: 5

Re: [SOLVED] Monitor with HDMI freeze at startup

Yeah, i know that gold soesn't help smile
So, the usb-c -> Display Port arrived and it solved my problem out-of-the-box.
My usb-c support Display Port 1.2, so i dedicated that port to the monitor.
I feel sad a bit because at the main page of my dell laptop shows that i have hdmi 2.0, but the laptop's manual say it doesn't, only 1.4 (which is only 4k@30).
Anyway, thanks for your help smile

Offline

#6 2019-05-13 09:46:08

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,509

Re: [SOLVED] Monitor with HDMI freeze at startup

Cool.
Please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2019-05-13 20:54:38

g0rbe
Member
Registered: 2019-01-07
Posts: 5

Re: [SOLVED] Monitor with HDMI freeze at startup

I know that i forgotten something big_smile

Offline

Pages: 1

Board footer

Powered by FluxBB