You are not logged in.
Hello!
Some times ago I've activated PRIME on my laptop following the Wiki and the procedure has been successful.
Integrated card is the Intel one and discrete one is the AMD.
Now I've tried to connect my laptop to a video projector with an HDMI cable but it was not recognized by my laptop.
The same projector with the same cable works on windows, which is installed in dual boot on the same laptop.
Here there are the output of some xrandr command suggested by the wiki to activate reverse PRIME (which I suppose could be the solution)
$ xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 380mm x 210mm
1920x1080 60.01*+ 59.93 48.01
1680x1050 59.95 59.88
1400x1050 59.98
1600x900 60.00 59.95 59.82
1280x1024 60.02
1400x900 59.96 59.88
1280x960 60.00
1368x768 60.00 59.88 59.85
1280x800 59.81 59.91
1280x720 59.86 60.00 59.74
1024x768 60.00
1024x576 60.00 59.90 59.82
960x540 60.00 59.63 59.82
800x600 60.32 56.25
864x486 60.00 59.92 59.57
640x480 59.94
720x405 59.51 60.00 58.99
640x360 59.84 59.32 60.00
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
$ xrandr --listactivemonitors
Monitors: 1
0: +*eDP1 1920/380x1080/210+0+0 eDP1
$ xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x66 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 4 outputs: 3 associated providers: 1 name:Intel
Provider 1: id: 0x3f cap: 0xd, Source Output, Source Offload, Sink Offload crtcs: 0 outputs: 0 associated providers: 1 name:Unknown AMD Radeon GPU @ pci:0000:01:00.0
$ xrandr --setprovideroutputsource 1 0
X Error of failed request: BadValue (integer parameter out of range for operation)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 35 (RRSetProviderOutputSource)
Value in failed request: 0x3f
Serial number of failed request: 16
Current serial number in output stream: 17
Thanks for your help!
Offline
post lspci -k and xorg log please.
How do you start X ?
Are there other xrandr commands executed before this one ?
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
(A works at time B) && (time C > time B ) ≠ (A works at time C)
Offline