You are not logged in.

#1 2019-05-26 02:24:29

xenof
Member
Registered: 2019-05-26
Posts: 1

Brother HL-L2360DW Printer job stuck

Hi all,

I'm attempting to set up my Brother printer, and the printer was discovered through the cups web interface easily. I've also installed the driver here. When I submit a test page job via the CUPS web interface, the printer is stuck on "processing" with the message "the printer is in use". I suspect this is a driver problem. Here's what I've tried:
1. Using the AUR mentioned above
2. Extracting the ppd from the deb file from the brother website
3. Extracting the rpm from the brother's website and moving everything into place.
4. Using the driverless driver.

None of these have worked. Any ideas would be well appreciated.

EDIT: Tried something else. Downloaded both the cupswrapper and the lpd driver from the brother website and extracted the rpms and moved the appropriate files in place. No luck there either.
Thanks in advance.

EDIT 2: There was an issue specific to the printer. The printer was stuck on setup wizard for some reason, just hit ok and the printer finally work. Sorry for the trouble.

Last edited by xenof (2019-05-26 03:39:20)

Offline

Board footer

Powered by FluxBB