You are not logged in.

Pages: 1

#1 2019-06-10 20:45:16

olocin
Member
Registered: 2018-01-03
Posts: 171

'unable to enumerate USB device' errors

Since latest kernel update (5.1.7-arch1-1-ARCH), I get new errors

kernel: usb 1-4.2: device descriptor read/64, error -32
kernel: usb 1-4.2: device descriptor read/64, error -32
kernel: usb 1-4.2: device descriptor read/64, error -32
kernel: usb 1-4.2: device descriptor read/64, error -32
kernel: usb 1-4.2: device not accepting address 8, error -71
kernel: usb 1-4.2: device not accepting address 9, error -71
kernel: usb 1-4-port2: unable to enumerate USB device
kernel: usb 1-4.2: device descriptor read/64, error -32
kernel: usb 1-4.2: device descriptor read/64, error -32
kernel: usb 1-4.2: device descriptor read/64, error -32
kernel: usb 1-4.2: device descriptor read/64, error -32
kernel: usb 1-4.2: device not accepting address 13, error -71
kernel: usb 1-4.2: device not accepting address 14, error -71
kernel: usb 1-4-port2: unable to enumerate USB device

Is it something already known or should I file a bug?

Offline

#2 2019-06-11 07:31:51

seth
Member
Registered: 2012-09-03
Posts: 51,772

Re: 'unable to enumerate USB device' errors

There's a protocol error because of a broken pipe on a very specific device, but w/o context (full dmesg, lspci, lsusb & "lsusb -t") it's not possible to say anything else.
In doubt try to unplug all external devices to isolate the offender (though it could be an internal device)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2019-06-11 15:20:06

olocin
Member
Registered: 2018-01-03
Posts: 171

Re: 'unable to enumerate USB device' errors

It's related to my docking station, if I undock then no errors.

$ lsusb -t
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
    |__ Port 4: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
    |__ Port 4: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 4: Dev 10, If 0, Class=Hub, Driver=hub/3p, 480M
            |__ Port 1: Dev 15, If 0, Class=Hub, Driver=hub/3p, 480M
                |__ Port 2: Dev 16, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
                |__ Port 2: Dev 16, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
                |__ Port 3: Dev 17, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
    |__ Port 5: Dev 3, If 0, Class=Chip/SmartCard, Driver=, 12M
    |__ Port 7: Dev 5, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 7: Dev 5, If 1, Class=Wireless, Driver=btusb, 12M
    |__ Port 8: Dev 7, If 1, Class=Video, Driver=uvcvideo, 480M
    |__ Port 8: Dev 7, If 0, Class=Video, Driver=uvcvideo, 480M
$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation Skylake GT2 [HD Graphics 520] (rev 07)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1)
00:1c.2 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #3 (rev f1)
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection I219-LM (rev 21)
04:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a)
05:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM951/PM951 (rev 01)
$ lsusb
Bus 002 Device 002: ID 17ef:1010 Lenovo
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 007: ID 04ca:7058 Lite-On Technology Corp.
Bus 001 Device 005: ID 8087:0a2b Intel Corp.
Bus 001 Device 003: ID 058f:9540 Alcor Micro Corp. AU9540 Smartcard Reader
Bus 001 Device 017: ID 05ac:0304 Apple, Inc. Mighty Mouse [Mitsumi, M1152]
Bus 001 Device 016: ID 05ac:024f Apple, Inc.
Bus 001 Device 015: ID 05ac:1006 Apple, Inc. Hub in Aluminum Keyboard
Bus 001 Device 010: ID 17ef:100f Lenovo
Bus 001 Device 002: ID 17ef:1010 Lenovo
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
$ dmesg
[    0.000000] Linux version 5.1.8-arch1-1-ARCH (builduser@heftig-22377) (gcc version 8.3.0 (GCC)) #1 SMP PREEMPT Sun Jun 9 20:28:28 UTC 2019
[    0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/nvme0n1p5 rw modprobe.blacklist=kvm,kvm_intel
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a3efdfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a3efe000-0x00000000a3efefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000a3eff000-0x00000000a3f28fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a3f29000-0x00000000ad830fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ad831000-0x00000000aff75fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aff76000-0x00000000aff77fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aff78000-0x00000000aff78fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aff79000-0x00000000affc5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000affc6000-0x00000000afffdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000afffe000-0x00000000afffefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000affff000-0x00000000b7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b8600000-0x00000000bc7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000005417fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by Lenovo
[    0.000000] efi:  SMBIOS=0xaf07d000  ACPI=0xafffd000  ACPI 2.0=0xafffd014  ESRT=0xaeefa000  TPMEventLog=0xa402d018 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: LENOVO 20F9CTO1WW/20F9CTO1WW, BIOS N1CET75W (1.43 ) 04/19/2019
[    0.000000] tsc: Detected 2500.000 MHz processor
[    0.024985] tsc: Detected 2496.000 MHz TSC
[    0.024985] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.024987] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.024994] last_pfn = 0x541800 max_arch_pfn = 0x400000000
[    0.025001] MTRR default type: write-back
[    0.025002] MTRR fixed ranges enabled:
[    0.025003]   00000-9FFFF write-back
[    0.025004]   A0000-BFFFF uncachable
[    0.025005]   C0000-FFFFF write-protect
[    0.025005] MTRR variable ranges enabled:
[    0.025007]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.025008]   1 base 00BC000000 mask 7FFC000000 uncachable
[    0.025009]   2 base 00BA000000 mask 7FFE000000 uncachable
[    0.025009]   3 disabled
[    0.025010]   4 disabled
[    0.025010]   5 disabled
[    0.025011]   6 disabled
[    0.025011]   7 disabled
[    0.025012]   8 disabled
[    0.025012]   9 disabled
[    0.025905] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.026109] last_pfn = 0xaffff max_arch_pfn = 0x400000000
[    0.044149] esrt: Reserving ESRT space from 0x00000000aeefa000 to 0x00000000aeefa088.
[    0.044157] check: Scanning 1 areas for low memory corruption
[    0.044161] Using GB pages for direct mapping
[    0.044163] BRK [0x2ec801000, 0x2ec801fff] PGTABLE
[    0.044165] BRK [0x2ec802000, 0x2ec802fff] PGTABLE
[    0.044166] BRK [0x2ec803000, 0x2ec803fff] PGTABLE
[    0.044198] BRK [0x2ec804000, 0x2ec804fff] PGTABLE
[    0.044200] BRK [0x2ec805000, 0x2ec805fff] PGTABLE
[    0.044375] BRK [0x2ec806000, 0x2ec806fff] PGTABLE
[    0.044410] BRK [0x2ec807000, 0x2ec807fff] PGTABLE
[    0.044497] BRK [0x2ec808000, 0x2ec808fff] PGTABLE
[    0.044548] BRK [0x2ec809000, 0x2ec809fff] PGTABLE
[    0.044591] Secure boot disabled
[    0.044592] RAMDISK: [mem 0x7f330000-0x7fffefff]
[    0.044603] ACPI: Early table checksum verification disabled
[    0.044606] ACPI: RSDP 0x00000000AFFFD014 000024 (v02 LENOVO)
[    0.044609] ACPI: XSDT 0x00000000AFFCF188 0000EC (v01 LENOVO TP-N1C   00000000 PTEC 00000002)
[    0.044614] ACPI: FACP 0x00000000AFFF1000 0000F4 (v05 LENOVO TP-N1C   00001430 PTEC 00000002)
[    0.044619] ACPI: DSDT 0x00000000AFFDA000 0125E3 (v02 LENOVO TP-N1C   00001430 INTL 20141107)
[    0.044622] ACPI: FACS 0x00000000AFF90000 000040
[    0.044625] ACPI: TCPA 0x00000000AFFFB000 000032 (v02 LENOVO TP-N1C   00000002 PTEC 00000002)
[    0.044628] ACPI: SSDT 0x00000000AFFFA000 0004B7 (v02 LENOVO Tpm2Tabl 00001000 INTL 20141107)
[    0.044631] ACPI: SSDT 0x00000000AFFF9000 00004B (v02 LENOVO MeSsdt   00003000 INTL 20141107)
[    0.044633] ACPI: TPM2 0x00000000AFFF8000 000034 (v03 LENOVO TP-N1C   00001430 PTEC 00000002)
[    0.044636] ACPI: UEFI 0x00000000AFFA7000 000042 (v01 LENOVO TP-N1C   00001430 PTEC 00000002)
[    0.044638] ACPI: SSDT 0x00000000AFFF3000 004E0A (v02 LENOVO SaSsdt   00003000 INTL 20141107)
[    0.044641] ACPI: SSDT 0x00000000AFFF2000 0005C5 (v02 LENOVO PerfTune 00001000 INTL 20141107)
[    0.044644] ACPI: ECDT 0x00000000AFFF0000 000052 (v01 LENOVO TP-N1C   00001430 PTEC 00000002)
[    0.044646] ACPI: HPET 0x00000000AFFEF000 000038 (v01 LENOVO TP-N1C   00001430 PTEC 00000002)
[    0.044649] ACPI: APIC 0x00000000AFFEE000 0000BC (v03 LENOVO TP-N1C   00001430 PTEC 00000002)
[    0.044651] ACPI: MCFG 0x00000000AFFED000 00003C (v01 LENOVO TP-N1C   00001430 PTEC 00000002)
[    0.044654] ACPI: SSDT 0x00000000AFFD8000 0018D2 (v01 LENOVO SataAhci 00001000 INTL 20141107)
[    0.044656] ACPI: DBGP 0x00000000AFFD7000 000034 (v01 LENOVO TP-N1C   00001430 PTEC 00000002)
[    0.044659] ACPI: DBG2 0x00000000AFFD6000 000054 (v00 LENOVO TP-N1C   00001430 PTEC 00000002)
[    0.044661] ACPI: BOOT 0x00000000AFFD5000 000028 (v01 LENOVO TP-N1C   00001430 PTEC 00000002)
[    0.044664] ACPI: BATB 0x00000000AFFD4000 00004A (v02 LENOVO TP-N1C   00001430 PTEC 00000002)
[    0.044666] ACPI: SLIC 0x00000000AFFD3000 000176 (v01 LENOVO TP-N1C   00001430 PTEC 00000002)
[    0.044669] ACPI: SSDT 0x00000000AFFD2000 000E73 (v02 LENOVO CpuSsdt  00003000 INTL 20141107)
[    0.044671] ACPI: SSDT 0x00000000AFFD1000 000403 (v02 LENOVO CtdpB    00001000 INTL 20141107)
[    0.044674] ACPI: POAT 0x00000000AFFD0000 000055 (v03 LENOVO TP-N1C   00001430 PTEC 00000002)
[    0.044677] ACPI: ASF! 0x00000000AFFFC000 0000A5 (v32 LENOVO TP-N1C   00001430 PTEC 00000002)
[    0.044679] ACPI: FPDT 0x00000000AFFCE000 000044 (v01 LENOVO TP-N1C   00001430 PTEC 00000002)
[    0.044682] ACPI: BGRT 0x00000000AFFCD000 000038 (v01 LENOVO TP-N1C   00001430 PTEC 00000002)
[    0.044684] ACPI: UEFI 0x00000000AFF88000 00013E (v01 LENOVO TP-N1C   00001430 PTEC 00000002)
[    0.044692] ACPI: Local APIC address 0xfee00000
[    0.044874] No NUMA configuration found
[    0.044875] Faking a node at [mem 0x0000000000000000-0x00000005417fffff]
[    0.044878] NODE_DATA(0) allocated [mem 0x5417fc000-0x5417fffff]
[    0.044905] Zone ranges:
[    0.044906]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.044908]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.044909]   Normal   [mem 0x0000000100000000-0x00000005417fffff]
[    0.044910]   Device   empty
[    0.044910] Movable zone start for each node
[    0.044911] Early memory node ranges
[    0.044912]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.044913]   node   0: [mem 0x0000000000059000-0x000000000009cfff]
[    0.044913]   node   0: [mem 0x0000000000100000-0x00000000a3efdfff]
[    0.044914]   node   0: [mem 0x00000000a3f29000-0x00000000ad830fff]
[    0.044915]   node   0: [mem 0x00000000afffe000-0x00000000afffefff]
[    0.044915]   node   0: [mem 0x0000000100000000-0x00000005417fffff]
[    0.045087] Zeroed struct page in unavailable ranges: 10334 pages
[    0.045088] Initmem setup node 0 [mem 0x0000000000001000-0x00000005417fffff]
[    0.045089] On node 0 totalpages: 5173154
[    0.045090]   DMA zone: 64 pages used for memmap
[    0.045091]   DMA zone: 21 pages reserved
[    0.045092]   DMA zone: 3995 pages, LIFO batch:0
[    0.045185]   DMA32 zone: 11041 pages used for memmap
[    0.045186]   DMA32 zone: 706567 pages, LIFO batch:63
[    0.062125]   Normal zone: 69728 pages used for memmap
[    0.062126]   Normal zone: 4462592 pages, LIFO batch:63
[    0.162874] Reserving Intel graphics memory at [mem 0xba800000-0xbc7fffff]
[    0.163027] ACPI: PM-Timer IO Port: 0x1808
[    0.163028] ACPI: Local APIC address 0xfee00000
[    0.163034] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.163035] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.163036] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.163036] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.163037] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.163038] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.163038] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.163039] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.163069] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.163071] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.163072] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.163074] ACPI: IRQ0 used by override.
[    0.163075] ACPI: IRQ9 used by override.
[    0.163077] Using ACPI (MADT) for SMP configuration information
[    0.163078] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.163086] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.163105] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.163107] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.163108] PM: Registered nosave memory: [mem 0x0009d000-0x000fffff]
[    0.163110] PM: Registered nosave memory: [mem 0xa3efe000-0xa3efefff]
[    0.163111] PM: Registered nosave memory: [mem 0xa3eff000-0xa3f28fff]
[    0.163112] PM: Registered nosave memory: [mem 0xad831000-0xaff75fff]
[    0.163113] PM: Registered nosave memory: [mem 0xaff76000-0xaff77fff]
[    0.163113] PM: Registered nosave memory: [mem 0xaff78000-0xaff78fff]
[    0.163114] PM: Registered nosave memory: [mem 0xaff79000-0xaffc5fff]
[    0.163114] PM: Registered nosave memory: [mem 0xaffc6000-0xafffdfff]
[    0.163116] PM: Registered nosave memory: [mem 0xaffff000-0xb7ffffff]
[    0.163117] PM: Registered nosave memory: [mem 0xb8000000-0xb85fffff]
[    0.163117] PM: Registered nosave memory: [mem 0xb8600000-0xbc7fffff]
[    0.163118] PM: Registered nosave memory: [mem 0xbc800000-0xf80f9fff]
[    0.163118] PM: Registered nosave memory: [mem 0xf80fa000-0xf80fafff]
[    0.163119] PM: Registered nosave memory: [mem 0xf80fb000-0xf80fcfff]
[    0.163120] PM: Registered nosave memory: [mem 0xf80fd000-0xf80fdfff]
[    0.163120] PM: Registered nosave memory: [mem 0xf80fe000-0xfdffffff]
[    0.163121] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.163121] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
[    0.163123] [mem 0xbc800000-0xf80f9fff] available for PCI devices
[    0.163124] Booting paravirtualized kernel on bare hardware
[    0.163127] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.284745] random: get_random_bytes called from start_kernel+0x96/0x538 with crng_init=0
[    0.284753] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.284934] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u524288
[    0.284941] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.284942] pcpu-alloc: [0] 0 1 2 3 
[    0.284960] Built 1 zonelists, mobility grouping on.  Total pages: 5092300
[    0.284961] Policy zone: Normal
[    0.284962] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/nvme0n1p5 rw modprobe.blacklist=kvm,kvm_intel
[    0.288328] Calgary: detecting Calgary via BIOS EBDA area
[    0.288330] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.328908] Memory: 20166780K/20692616K available (12291K kernel code, 1317K rwdata, 3768K rodata, 1564K init, 3740K bss, 525836K reserved, 0K cma-reserved)
[    0.329052] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.329057] Kernel/User page tables isolation: enabled
[    0.329078] ftrace: allocating 37090 entries in 145 pages
[    0.344618] rcu: Preemptible hierarchical RCU implementation.
[    0.344619] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.344620] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.344620] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.344621] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.344622] 	Tasks RCU enabled.
[    0.344623] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.344623] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.346323] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 16
[    0.346533] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.346655] Console: colour dummy device 80x25
[    0.346658] printk: console [tty0] enabled
[    0.346675] ACPI: Core revision 20190215
[    0.347007] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.347040] hpet clockevent registered
[    0.347081] APIC: Switch to symmetric I/O mode setup
[    0.348308] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.352601] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.367054] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23fa772cf26, max_idle_ns: 440795269835 ns
[    0.367066] Calibrating delay loop (skipped), value calculated using timer frequency.. 4993.00 BogoMIPS (lpj=8320000)
[    0.367068] pid_max: default: 32768 minimum: 301
[    0.370417] LSM: Security Framework initializing
[    0.370421] Yama: becoming mindful.
[    0.374389] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[    0.376334] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.376404] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.376465] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.376608] *** VALIDATE proc ***
[    0.376653] *** VALIDATE cgroup1 ***
[    0.376654] *** VALIDATE cgroup2 ***
[    0.376683] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.376683] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.376697] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.376712] process: using mwait in idle threads
[    0.376714] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.376715] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.376717] Spectre V2 : Mitigation: Full generic retpoline
[    0.376717] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.376718] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.376724] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.376724] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.376725] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.376751] MDS: Mitigation: Clear CPU buffers
[    0.377011] Freeing SMP alternatives memory: 32K
[    0.379118] TSC deadline timer enabled
[    0.379122] smpboot: CPU0: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[    0.397091] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.397229] ... version:                4
[    0.397230] ... bit width:              48
[    0.397230] ... generic registers:      4
[    0.397231] ... value mask:             0000ffffffffffff
[    0.397232] ... max period:             00007fffffffffff
[    0.397232] ... fixed-purpose events:   3
[    0.397233] ... event mask:             000000070000000f
[    0.403739] rcu: Hierarchical SRCU implementation.
[    0.427287] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.433768] smp: Bringing up secondary CPUs ...
[    0.473785] x86: Booting SMP configuration:
[    0.473790] .... node  #0, CPUs:      #1 #2
[    0.515007] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.553784]  #3
[    0.554726] smp: Brought up 1 node, 4 CPUs
[    0.554726] smpboot: Max logical packages: 1
[    0.554726] smpboot: Total of 4 processors activated (19975.00 BogoMIPS)
[    0.557496] devtmpfs: initialized
[    0.557496] x86/mm: Memory block size: 128MB
[    0.558434] PM: Registering ACPI NVS region [mem 0xa3efe000-0xa3efefff] (4096 bytes)
[    0.558434] PM: Registering ACPI NVS region [mem 0xaff76000-0xaff77fff] (8192 bytes)
[    0.558434] PM: Registering ACPI NVS region [mem 0xaff79000-0xaffc5fff] (315392 bytes)
[    0.558434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.558434] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.558434] pinctrl core: initialized pinctrl subsystem
[    0.558434] PM: RTC time: 15:12:57, date: 2019-06-11
[    0.558434] NET: Registered protocol family 16
[    0.558434] audit: initializing netlink subsys (disabled)
[    0.558434] audit: type=2000 audit(1560265977.213:1): state=initialized audit_enabled=0 res=1
[    0.558434] cpuidle: using governor ladder
[    0.558434] cpuidle: using governor menu
[    0.558434] Simple Boot Flag at 0x47 set to 0x1
[    0.558434] ACPI: bus type PCI registered
[    0.558434] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.558434] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.558434] PCI: not using MMCONFIG
[    0.558434] PCI: Using configuration type 1 for base access
[    0.561106] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.561106] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.561106] ACPI: Added _OSI(Module Device)
[    0.561106] ACPI: Added _OSI(Processor Device)
[    0.561106] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.561106] ACPI: Added _OSI(Processor Aggregator Device)
[    0.561106] ACPI: Added _OSI(Linux-Dell-Video)
[    0.561106] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.561106] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.597254] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.598543] ACPI: EC: EC started
[    0.598544] ACPI: EC: interrupt blocked
[    0.600336] ACPI: \: Used as first EC
[    0.600337] ACPI: \: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.600338] ACPI: EC: Boot ECDT EC used to handle transactions
[    0.601952] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.609894] ACPI: Dynamic OEM Table Load:
[    0.609910] ACPI: SSDT 0xFFFF963669815800 0006AC (v02 PmRef  Cpu0Ist  00003000 INTL 20141107)
[    0.610529] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.611519] ACPI: Dynamic OEM Table Load:
[    0.611526] ACPI: SSDT 0xFFFF963669BD9C00 0003CF (v02 PmRef  Cpu0Cst  00003001 INTL 20141107)
[    0.612006] ACPI: Dynamic OEM Table Load:
[    0.612012] ACPI: SSDT 0xFFFF963669FFE9C0 00008E (v02 PmRef  Cpu0Hwp  00003000 INTL 20141107)
[    0.612350] ACPI: Dynamic OEM Table Load:
[    0.612355] ACPI: SSDT 0xFFFF963669BDC600 000130 (v02 PmRef  HwpLvt   00003000 INTL 20141107)
[    0.613331] ACPI: Dynamic OEM Table Load:
[    0.613338] ACPI: SSDT 0xFFFF963669810800 0005AA (v02 PmRef  ApIst    00003000 INTL 20141107)
[    0.614165] ACPI: Dynamic OEM Table Load:
[    0.614170] ACPI: SSDT 0xFFFF963669BDC800 000119 (v02 PmRef  ApHwp    00003000 INTL 20141107)
[    0.614612] ACPI: Dynamic OEM Table Load:
[    0.614617] ACPI: SSDT 0xFFFF963669BDCA00 000119 (v02 PmRef  ApCst    00003000 INTL 20141107)
[    0.616466] ACPI: Interpreter enabled
[    0.616515] ACPI: (supports S0 S3 S4 S5)
[    0.616516] ACPI: Using IOAPIC for interrupt routing
[    0.616547] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.617001] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.617008] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.617322] ACPI: Enabled 5 GPEs in block 00 to 7F
[    0.620858] ACPI: Power Resource [PUBS] (on)
[    0.621184] ACPI: Power Resource [PG00] (on)
[    0.621314] ACPI: Power Resource [PG01] (on)
[    0.621436] ACPI: Power Resource [PG02] (on)
[    0.623570] ACPI: Power Resource [WRST] (off)
[    0.623685] ACPI: Power Resource [WRST] (off)
[    0.643556] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.643673] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.643792] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.643906] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.644019] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.644132] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.644245] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.644358] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.644481] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.644486] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.644618] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR]
[    0.644676] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.644677] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.644679] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.644680] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.644946] PCI host bridge to bus 0000:00
[    0.644948] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.644950] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.644951] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.644952] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.644952] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.644953] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.644954] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.644955] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.644956] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.644957] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.644958] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.644959] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.644960] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.644961] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.644962] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.644963] pci_bus 0000:00: root bus resource [mem 0xbc800000-0xfebfffff window]
[    0.644964] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.644972] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[    0.645081] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[    0.645093] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit]
[    0.645098] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref]
[    0.645103] pci 0000:00:02.0: reg 0x20: [io  0xe000-0xe03f]
[    0.645118] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.645241] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.645253] pci 0000:00:08.0: reg 0x10: [mem 0xe1248000-0xe1248fff 64bit]
[    0.645383] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.645405] pci 0000:00:14.0: reg 0x10: [mem 0xe1220000-0xe122ffff 64bit]
[    0.645474] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.645691] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.645712] pci 0000:00:14.2: reg 0x10: [mem 0xe1249000-0xe1249fff 64bit]
[    0.645866] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.645893] pci 0000:00:16.0: reg 0x10: [mem 0xe124a000-0xe124afff 64bit]
[    0.645970] pci 0000:00:16.0: PME# supported from D3hot
[    0.646164] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.646255] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.646440] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400
[    0.646530] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.646707] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[    0.646796] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.646992] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[    0.647264] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.647278] pci 0000:00:1f.2: reg 0x10: [mem 0xe1244000-0xe1247fff]
[    0.647471] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[    0.647500] pci 0000:00:1f.3: reg 0x10: [mem 0xe1240000-0xe1243fff 64bit]
[    0.647533] pci 0000:00:1f.3: reg 0x20: [mem 0xe1230000-0xe123ffff 64bit]
[    0.647586] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.647756] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.647810] pci 0000:00:1f.4: reg 0x10: [mem 0xe124b000-0xe124b0ff 64bit]
[    0.647861] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.648077] pci 0000:00:1f.6: [8086:156f] type 00 class 0x020000
[    0.648103] pci 0000:00:1f.6: reg 0x10: [mem 0xe1200000-0xe121ffff]
[    0.648206] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.648410] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.648778] pci 0000:04:00.0: [8086:24f3] type 00 class 0x028000
[    0.648873] pci 0000:04:00.0: reg 0x10: [mem 0xe1100000-0xe1101fff 64bit]
[    0.649168] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.649861] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.649866] pci 0000:00:1c.2:   bridge window [mem 0xe1100000-0xe11fffff]
[    0.649998] pci 0000:05:00.0: [144d:a802] type 00 class 0x010802
[    0.650026] pci 0000:05:00.0: reg 0x10: [mem 0xe1000000-0xe1003fff 64bit]
[    0.650035] pci 0000:05:00.0: reg 0x18: [io  0xd000-0xd0ff]
[    0.650241] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.650244] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.650246] pci 0000:00:1c.4:   bridge window [mem 0xe1000000-0xe10fffff]
[    0.651887] ACPI: EC: interrupt unblocked
[    0.651996] ACPI: EC: event unblocked
[    0.652009] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.652010] ACPI: \_SB_.PCI0.LPC_.EC__: Boot DSDT EC used to handle transactions and events
[    0.652094] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[    0.652094] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.652094] pci 0000:00:02.0: vgaarb: setting as boot device
[    0.652094] vgaarb: loaded
[    0.652094] ACPI: bus type USB registered
[    0.652094] usbcore: registered new interface driver usbfs
[    0.652094] usbcore: registered new interface driver hub
[    0.652094] usbcore: registered new device driver usb
[    0.652094] pps_core: LinuxPPS API ver. 1 registered
[    0.652094] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.652094] PTP clock support registered
[    0.652094] EDAC MC: Ver: 3.0.0
[    0.652094] Registered efivars operations
[    0.680598] PCI: Using ACPI for IRQ routing
[    0.687055] PCI: pci_cache_line_size set to 64 bytes
[    0.687055] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.687055] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.687055] e820: reserve RAM buffer [mem 0xa3efe000-0xa3ffffff]
[    0.687055] e820: reserve RAM buffer [mem 0xad831000-0xafffffff]
[    0.687055] e820: reserve RAM buffer [mem 0xaffff000-0xafffffff]
[    0.687055] e820: reserve RAM buffer [mem 0x541800000-0x543ffffff]
[    0.687056] NetLabel: Initializing
[    0.687056] NetLabel:  domain hash size = 128
[    0.687056] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.687056] NetLabel:  unlabeled traffic allowed by default
[    0.687596] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.687599] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.691419] clocksource: Switched to clocksource tsc-early
[    0.700932] VFS: Disk quotas dquot_6.6.0
[    0.700946] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.700971] *** VALIDATE hugetlbfs ***
[    0.701016] pnp: PnP ACPI init
[    0.701567] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.701569] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.701570] system 00:00: [mem 0x00100000-0xbc7fffff] could not be reserved
[    0.701571] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.701573] system 00:00: [mem 0xfed4c000-0xffffffff] has been reserved
[    0.701577] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.701710] system 00:01: [io  0x1800-0x189f] has been reserved
[    0.701712] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.701713] system 00:01: [io  0x0880-0x08ff] has been reserved
[    0.701714] system 00:01: [io  0x0900-0x097f] has been reserved
[    0.701716] system 00:01: [io  0x0980-0x09ff] has been reserved
[    0.701717] system 00:01: [io  0x0a00-0x0a7f] has been reserved
[    0.701718] system 00:01: [io  0x0a80-0x0aff] has been reserved
[    0.701719] system 00:01: [io  0x0b00-0x0b7f] has been reserved
[    0.701720] system 00:01: [io  0x0b80-0x0bff] has been reserved
[    0.701721] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.701722] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.701723] system 00:01: [io  0x1640-0x165f] has been reserved
[    0.701725] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[    0.701727] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.701728] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.701729] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.701730] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
[    0.701731] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.701733] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.701734] system 00:01: [mem 0xf7fe0000-0xf7ffffff] has been reserved
[    0.701737] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.701811] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.701830] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[    0.701846] pnp 00:04: Plug and Play ACPI device, IDs LEN004b PNP0f13 (active)
[    0.701887] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.701890] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.702593] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.702594] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.702595] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.702597] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.702598] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.702599] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.702600] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.702604] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.702954] system 00:07: [io  0xff00-0xfffe] has been reserved
[    0.702957] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.703064] pnp: PnP ACPI: found 8 devices
[    0.708769] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.708778] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.708791] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.708795] pci 0000:00:1c.2:   bridge window [mem 0xe1100000-0xe11fffff]
[    0.708801] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.708803] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.708807] pci 0000:00:1c.4:   bridge window [mem 0xe1000000-0xe10fffff]
[    0.708813] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.708815] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.708816] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.708817] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.708818] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.708819] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.708820] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.708821] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.708822] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.708823] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.708824] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.708824] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.708825] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.708826] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.708827] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.708828] pci_bus 0000:00: resource 19 [mem 0xbc800000-0xfebfffff window]
[    0.708830] pci_bus 0000:04: resource 1 [mem 0xe1100000-0xe11fffff]
[    0.708831] pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
[    0.708832] pci_bus 0000:05: resource 1 [mem 0xe1000000-0xe10fffff]
[    0.708942] NET: Registered protocol family 2
[    0.709078] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
[    0.709180] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.709469] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.709574] TCP: Hash tables configured (established 262144 bind 65536)
[    0.709612] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[    0.709689] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[    0.709793] NET: Registered protocol family 1
[    0.709797] NET: Registered protocol family 44
[    0.709807] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.710447] PCI: CLS 0 bytes, default 64
[    0.710476] Unpacking initramfs...
[    0.877115] Freeing initrd memory: 13116K
[    0.877118] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.877119] software IO TLB: mapped [mem 0x9e23b000-0xa223b000] (64MB)
[    0.877156] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23fa772cf26, max_idle_ns: 440795269835 ns
[    0.877169] clocksource: Switched to clocksource tsc
[    0.877243] check: Scanning for low memory corruption every 60 seconds
[    0.877801] Initialise system trusted keyrings
[    0.877811] Key type blacklist registered
[    0.877848] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    0.879040] zbud: loaded
[    0.924431] Key type asymmetric registered
[    0.924433] Asymmetric key parser 'x509' registered
[    0.924445] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.924479] io scheduler mq-deadline registered
[    0.924480] io scheduler kyber registered
[    0.924528] io scheduler bfq registered
[    0.925314] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.925395] efifb: probing for efifb
[    0.925407] efifb: framebuffer at 0xc0000000, using 14400k, total 14400k
[    0.925408] efifb: mode is 2560x1440x32, linelength=10240, pages=1
[    0.925408] efifb: scrolling: redraw
[    0.925410] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.925451] fbcon: Deferring console take-over
[    0.925452] fb0: EFI VGA frame buffer device
[    0.925459] intel_idle: MWAIT substates: 0x11142120
[    0.925459] intel_idle: v0.4.1 model 0x4E
[    0.925700] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.925742] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.927118] ACPI: Lid Switch [LID]
[    0.927165] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.933794] ACPI: Sleep Button [SLPB]
[    0.933856] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.937120] ACPI: Power Button [PWRF]
[    0.941802] thermal LNXTHERM:00: registered as thermal_zone0
[    0.941803] ACPI: Thermal Zone [THM0] (55 C)
[    0.942127] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.943964] nvme nvme0: pci function 0000:05:00.0
[    0.943994] usbcore: registered new interface driver usbserial_generic
[    0.943999] usbserial: USB Serial support registered for generic
[    0.944089] rtc_cmos 00:02: RTC can wake from S4
[    0.944619] rtc_cmos 00:02: registered as rtc0
[    0.944632] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.944681] intel_pstate: Intel P-state driver initializing
[    0.944863] intel_pstate: HWP enabled
[    0.944892] ledtrig-cpu: registered to indicate activity on CPUs
[    0.944925] intel_pmc_core:  initialized
[    0.945094] NET: Registered protocol family 10
[    0.952696] Segment Routing with IPv6
[    0.952727] NET: Registered protocol family 17
[    0.953039] mce: Using 8 MCE banks
[    0.953049] RAS: Correctable Errors collector initialized.
[    0.953082] microcode: sig=0x406e3, pf=0x80, revision=0xcc
[    0.953269] microcode: Microcode Update Driver: v2.2.
[    0.953297] sched_clock: Marking stable (956173358, -2909600)->(960377725, -7113967)
[    0.953601] registered taskstats version 1
[    0.953607] Loading compiled-in X.509 certificates
[    0.957426] Loaded X.509 cert 'Build time autogenerated kernel key: 97381e2c14a0fdcf526af9d842494541ce0ba577'
[    0.957445] zswap: loaded using pool lzo/zbud
[    0.963475] Key type big_key registered
[    0.964397] PM:   Magic number: 7:584:234
[    0.964448] memory memory112: hash matches
[    0.964607] rtc_cmos 00:02: setting system clock to 2019-06-11T15:12:57 UTC (1560265977)
[    1.073726] nvme nvme0: 4/0/0 default/read/poll queues
[    1.084517]  nvme0n1: p1 p2 p3 p4 p5
[    1.088199] Freeing unused decrypted memory: 2040K
[    1.088830] Freeing unused kernel image memory: 1564K
[    1.117717] Write protecting the kernel read-only data: 18432k
[    1.118908] Freeing unused kernel image memory: 2016K
[    1.119215] Freeing unused kernel image memory: 328K
[    1.142971] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.142973] x86/mm: Checking user space page tables
[    1.159993] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.159996] Run /init as init process
[    1.236045] fbcon: Taking over console
[    1.236097] Console: switching to colour frame buffer device 320x90
[    1.251650] Linux agpgart interface v0.103
[    1.318145] i915 0000:00:02.0: enabling device (0006 -> 0007)
[    1.318718] checking generic (c0000000 e10000) vs hw (c0000000 20000000)
[    1.318719] fb0: switching to inteldrmfb from EFI VGA
[    1.318734] Console: switching to colour dummy device 80x25
[    1.318817] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.319494] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.319495] [drm] Driver supports precise vblank timestamp query.
[    1.319893] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=mem
[    1.320272] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[    1.326665] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[    1.334721] [drm] Initialized i915 1.6.0 20190207 for 0000:00:02.0 on minor 0
[    1.337437] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.337729] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.524877] fbcon: inteldrmfb (fb0) is primary device
[    1.532161] Console: switching to colour frame buffer device 320x90
[    1.566618] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.737180] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.739761] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.739898] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.750692] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.750699] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.751782] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[    1.751786] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.752042] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    1.752044] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.752045] usb usb1: Product: xHCI Host Controller
[    1.752047] usb usb1: Manufacturer: Linux 5.1.8-arch1-1-ARCH xhci-hcd
[    1.752048] usb usb1: SerialNumber: 0000:00:14.0
[    1.752217] hub 1-0:1.0: USB hub found
[    1.752235] hub 1-0:1.0: 12 ports detected
[    1.754560] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.754567] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.754571] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.754671] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[    1.754673] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.754674] usb usb2: Product: xHCI Host Controller
[    1.754676] usb usb2: Manufacturer: Linux 5.1.8-arch1-1-ARCH xhci-hcd
[    1.754677] usb usb2: SerialNumber: 0000:00:14.0
[    1.755687] hub 2-0:1.0: USB hub found
[    1.755701] hub 2-0:1.0: 6 ports detected
[    1.757229] usb: port power management may be unreliable
[    1.774540] random: fast init done
[    1.775315] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.084226] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[    2.228752] usb 1-4: New USB device found, idVendor=17ef, idProduct=1010, bcdDevice=50.40
[    2.228757] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.228760] usb 1-4: Product: Lenovo ThinkPad Dock   
[    2.228763] usb 1-4: Manufacturer: LENOVO                 
[    2.229848] hub 1-4:1.0: USB hub found
[    2.230227] hub 1-4:1.0: 4 ports detected
[    2.347807] usb 2-4: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    2.601894] usb 2-4: New USB device found, idVendor=17ef, idProduct=1010, bcdDevice=50.41
[    2.601899] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.601902] usb 2-4: Product: Lenovo ThinkPad Dock   
[    2.601905] usb 2-4: Manufacturer: LENOVO                 
[    2.605321] hub 2-4:1.0: USB hub found
[    2.605832] hub 2-4:1.0: 4 ports detected
[    2.720973] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[    2.872585] usb 1-5: New USB device found, idVendor=058f, idProduct=9540, bcdDevice= 1.20
[    2.872591] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.872596] usb 1-5: Product: EMV Smartcard Reader
[    2.872599] usb 1-5: Manufacturer: Generic
[    2.947123] usb 1-4.2: new full-speed USB device number 4 using xhci_hcd
[    3.006813] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[    3.033806] usb 1-4.2: device descriptor read/64, error -32
[    3.227262] usb 1-4.2: device descriptor read/64, error -32
[    3.457110] usb 1-7: new full-speed USB device number 5 using xhci_hcd
[    3.553115] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
[    3.598035] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
[    3.598037] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.624932] systemd[1]: systemd 242.29-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    3.640481] systemd[1]: Detected architecture x86-64.
[    3.643669] systemd[1]: Set hostname to <...>.
[    3.680485] usb 1-4.2: new full-speed USB device number 6 using xhci_hcd
[    3.727274] systemd[1]: Listening on Process Core Dump Socket.
[    3.727566] systemd[1]: Listening on Journal Audit Socket.
[    3.727741] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.727924] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.728140] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.728321] systemd[1]: Listening on udev Kernel Socket.
[    3.728487] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.747623] random: lvm: uninitialized urandom read (4 bytes read)
[    3.753351] acpi_call: loading out-of-tree module taints kernel.
[    3.753372] acpi_call: module verification failed: signature and/or required key missing - tainting kernel
[    3.754211] EXT4-fs (nvme0n1p5): re-mounted. Opts: data=ordered
[    3.770428] usb 1-4.2: device descriptor read/64, error -32
[    3.795069] random: systemd-random-: uninitialized urandom read (512 bytes read)
[    3.967081] usb 1-4.2: device descriptor read/64, error -32
[    4.004735] audit: type=1130 audit(1560265980.536:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.013129] systemd-journald[270]: Received request to flush runtime journal from PID 1
[    4.073901] usb 1-4-port2: attempt power cycle
[    4.081075] audit: type=1130 audit(1560265980.613:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.125166] audit: type=1130 audit(1560265980.656:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hwdb-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.197085] usb 1-8: new high-speed USB device number 7 using xhci_hcd
[    4.347093] usb 1-8: New USB device found, idVendor=04ca, idProduct=7058, bcdDevice= 0.13
[    4.347096] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.347097] usb 1-8: Product: Integrated Camera
[    4.347098] usb 1-8: Manufacturer: 8SSC20F26968L1GZ69N037B
[    4.374645] audit: type=1130 audit(1560265980.906:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.455971] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    4.456087] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    4.458891] ACPI: AC Adapter [AC] (on-line)
[    4.479006] battery: ACPI: Battery Slot [BAT0] (battery present)
[    4.498516] battery: ACPI: Battery Slot [BAT1] (battery present)
[    4.501178] audit: type=1130 audit(1560265981.033:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.510863] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[    4.511041] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    4.511083] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    4.532216] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    4.542314] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    4.542316] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    4.542317] RAPL PMU: hw unit of domain package 2^-14 Joules
[    4.542317] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    4.542318] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    4.542319] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    4.559547] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
[    4.559561] caller snb_uncore_imc_init_box+0x6c/0xb0 [intel_uncore] mapping multiple BARs
[    4.567181] Non-volatile memory driver v1.3
[    4.579873] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    4.579874] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    4.580123] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    4.597534] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[    4.597536] thinkpad_acpi: http://ibm-acpi.sf.net/
[    4.597537] thinkpad_acpi: ThinkPad BIOS N1CET75W (1.43 ), EC unknown
[    4.597538] thinkpad_acpi: Lenovo ThinkPad T460s, model 20F9CTO1WW
[    4.604045] cryptd: max_cpu_qlen set to 1000
[    4.610522] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    4.615838] thinkpad_acpi: radio switch found; radios are enabled
[    4.615857] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    4.615858] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    4.628457] audit: type=1130 audit(1560265981.159:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.640590] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    4.643502] random: crng init done
[    4.651876] AVX2 version of gcm_enc/dec engaged.
[    4.651878] AES CTR mode by8 optimization enabled
[    4.671392] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.678787] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    4.686259] thinkpad_acpi: battery 2 registered (start 50, stop 60)
[    4.687079] usb 1-4.2: new full-speed USB device number 8 using xhci_hcd
[    4.687653] usb 1-4.2: Device not responding to setup address.
[    4.689105] thinkpad_acpi: battery 1 registered (start 50, stop 60)
[    4.689110] battery: new extension: ThinkPad Battery Extension
[    4.689166] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[    4.711537] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    4.713489] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.714425] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    4.714428] cfg80211: failed to load regulatory.db
[    4.716459] iTCO_vendor_support: vendor-support=0
[    4.719053] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    4.719195] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    4.720414] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.735974] audit: type=1130 audit(1560265981.266:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-501A\x2dB7CD comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.789209] audit: type=1130 audit(1560265981.319:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@leds:tpacpi::kbd_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.815746] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) c8:5b:76:7a:01:40
[    4.815754] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    4.815803] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: 1000FF-0FF
[    4.822936] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.824486] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[    4.832326] audit: type=1130 audit(1560265981.363:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.880996] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC293: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    4.880998] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.881000] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[    4.881001] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.881003] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.881004] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x19
[    4.881006] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1a
[    4.881007] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    4.893843] usb 1-4.2: Device not responding to setup address.
[    4.901800] Intel(R) Wireless WiFi driver for Linux
[    4.901802] Copyright(c) 2003- 2015 Intel Corporation
[    4.903140] iwlwifi 0000:04:00.0: enabling device (0000 -> 0002)
[    4.915417] intel_rapl: Found RAPL domain package
[    4.915419] intel_rapl: Found RAPL domain core
[    4.915420] intel_rapl: Found RAPL domain uncore
[    4.915421] intel_rapl: Found RAPL domain dram
[    4.924767] iwlwifi 0000:04:00.0: loaded firmware version 36.9f0a2d68.0 op_mode iwlmvm
[    4.959570] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    4.959624] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    4.959674] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    4.959722] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    4.959770] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    4.959821] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    4.959867] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    4.959918] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    4.959966] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    4.960013] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    5.044350] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[    5.100453] usb 1-4.2: device not accepting address 8, error -71
[    5.123284] iwlwifi 0000:04:00.0: base HW address: b8:08:cf:47:4c:f0
[    5.190407] usb 1-4.2: new full-speed USB device number 9 using xhci_hcd
[    5.190567] usb 1-4.2: Device not responding to setup address.
[    5.203134] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    5.203426] thermal thermal_zone3: failed to read out thermal zone (-61)
[    5.205724] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
[    5.382470] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4762]
[    5.397171] usb 1-4.2: Device not responding to setup address.
[    5.413187] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1094..]
[    5.413193] psmouse serio1: synaptics: Your touchpad (PNP: LEN004b PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    5.481823] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf003a3/0x943300/0x12e800/0x10000, board id: 3145, fw id: 2073050
[    5.481829] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    5.518706] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    5.523574] mousedev: PS/2 mouse device common for all mice
[    5.573568] kauditd_printk_skb: 14 callbacks suppressed
[    5.573569] audit: type=1130 audit(1560265982.103:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.603775] usb 1-4.2: device not accepting address 9, error -71
[    5.605855] usb 1-4-port2: unable to enumerate USB device
[    5.608922] audit: type=1130 audit(1560265982.139:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.690920] usb 1-4.4: new high-speed USB device number 10 using xhci_hcd
[    5.797423] usb 1-4.4: New USB device found, idVendor=17ef, idProduct=100f, bcdDevice= 0.01
[    5.797432] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.797437] usb 1-4.4: Product: Lenovo ThinkPad Dock
[    5.797441] usb 1-4.4: Manufacturer: Lenovo
[    5.797447] usb 1-4.4: SerialNumber: Rev1.2
[    5.798475] hub 1-4.4:1.0: USB hub found
[    5.798518] hub 1-4.4:1.0: 3 ports detected
[    5.852058] media: Linux media interface: v0.10
[    5.924750] audit: type=1130 audit(1560265982.456:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wpa_supplicant comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.944737] videodev: Linux video capture interface: v2.00
[    5.961776] Bluetooth: Core ver 2.22
[    5.961794] NET: Registered protocol family 31
[    5.961795] Bluetooth: HCI device and connection manager initialized
[    5.961799] Bluetooth: HCI socket layer initialized
[    5.961801] Bluetooth: L2CAP socket layer initialized
[    5.961804] Bluetooth: SCO socket layer initialized
[    5.973850] uvcvideo: Found UVC 1.00 device Integrated Camera (04ca:7058)
[    5.981270] audit: type=1130 audit(1560265982.513:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.990713] audit: type=1130 audit(1560265982.523:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.992614] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized!
[    5.992617] uvcvideo 1-8:1.0: Entity type for entity Extension 3 was not initialized!
[    5.992619] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized!
[    5.992620] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
[    5.992692] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input20
[    5.992766] usbcore: registered new interface driver uvcvideo
[    5.992767] USB Video Class driver (1.1.1)
[    6.084242] usbcore: registered new interface driver btusb
[    6.088715] Bluetooth: hci0: Firmware revision 0.0 build 10 week 41 2018
[    6.170751] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    6.274190] audit: type=1130 audit(1560265982.806:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=tlp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.317384] usb 1-4.2: new full-speed USB device number 11 using xhci_hcd
[    6.381791] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input19
[    6.403889] usb 1-4.2: device descriptor read/64, error -32
[    6.597369] usb 1-4.2: device descriptor read/64, error -32
[    6.790974] usb 1-4.2: new full-speed USB device number 12 using xhci_hcd
[    6.877719] usb 1-4.2: device descriptor read/64, error -32
[    7.071184] usb 1-4.2: device descriptor read/64, error -32
[    7.178333] usb 1-4-port2: attempt power cycle
[    7.797646] usb 1-4.2: new full-speed USB device number 13 using xhci_hcd
[    7.797944] usb 1-4.2: Device not responding to setup address.
[    8.004601] usb 1-4.2: Device not responding to setup address.
[    8.210953] usb 1-4.2: device not accepting address 13, error -71
[    8.297637] usb 1-4.2: new full-speed USB device number 14 using xhci_hcd
[    8.297951] usb 1-4.2: Device not responding to setup address.
[    8.504604] usb 1-4.2: Device not responding to setup address.
[    8.706338] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[    8.706403] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[    8.710401] usb 1-4.2: device not accepting address 14, error -71
[    8.710681] usb 1-4-port2: unable to enumerate USB device
[    8.910958] usb 1-4.4.1: new high-speed USB device number 15 using xhci_hcd
[    9.011796] usb 1-4.4.1: New USB device found, idVendor=05ac, idProduct=1006, bcdDevice=96.15
[    9.011802] usb 1-4.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    9.011805] usb 1-4.4.1: Product: Keyboard Hub
[    9.011808] usb 1-4.4.1: Manufacturer: Apple, Inc.
[    9.011811] usb 1-4.4.1: SerialNumber: 000000000000
[    9.013637] hub 1-4.4.1:1.0: USB hub found
[    9.013715] hub 1-4.4.1:1.0: 3 ports detected
[    9.294295] usb 1-4.4.1.2: new low-speed USB device number 16 using xhci_hcd
[    9.390590] usb 1-4.4.1.2: New USB device found, idVendor=05ac, idProduct=024f, bcdDevice= 0.74
[    9.390595] usb 1-4.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    9.390598] usb 1-4.4.1.2: Product: Apple Keyboard
[    9.390601] usb 1-4.4.1.2: Manufacturer: Apple Inc.
[    9.470969] usb 1-4.4.1.3: new low-speed USB device number 17 using xhci_hcd
[    9.570274] usb 1-4.4.1.3: New USB device found, idVendor=05ac, idProduct=0304, bcdDevice= 1.10
[    9.570280] usb 1-4.4.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    9.570283] usb 1-4.4.1.3: Product: Apple Optical USB Mouse
[    9.570286] usb 1-4.4.1.3: Manufacturer: Mitsumi Electric
[   10.695709] hidraw: raw HID events driver (C) Jiri Kosina
[   10.712647] usbcore: registered new interface driver usbhid
[   10.712649] usbhid: USB HID core driver
[   10.719169] input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4.1/1-4.4.1.2/1-4.4.1.2:1.0/0003:05AC:024F.0001/input/input21
[   10.774898] apple 0003:05AC:024F.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-0000:00:14.0-4.4.1.2/input0
[   10.775161] input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4.1/1-4.4.1.2/1-4.4.1.2:1.1/0003:05AC:024F.0002/input/input22
[   10.831403] apple 0003:05AC:024F.0002: input,hidraw1: USB HID v1.11 Device [Apple Inc. Apple Keyboard] on usb-0000:00:14.0-4.4.1.2/input1
[   10.831852] input: Mitsumi Electric Apple Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4.1/1-4.4.1.3/1-4.4.1.3:1.0/0003:05AC:0304.0003/input/input23
[   10.832351] apple 0003:05AC:0304.0003: input,hidraw2: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-0000:00:14.0-4.4.1.3/input0
[   10.850796] e1000e 0000:00:1f.6 enp0s31f6: Detected Hardware Unit Hang:
                 TDH                  <0>
                 TDT                  <1>
                 next_to_use          <1>
                 next_to_clean        <0>
               buffer_info[next_to_clean]:
                 time_stamp           <fffeaa6d>
                 next_to_watch        <0>
                 jiffies              <fffeacc0>
                 next_to_watch.status <0>
               MAC Status             <80080>
               PHY Status             <7949>
               PHY 1000BASE-T Status  <0>
               PHY Extended Status    <3000>
               PCI Status             <10>
[   12.358623] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   17.024556] audit: type=1006 audit(1560265993.556:31): pid=627 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[   17.049818] audit: type=1130 audit(1560265993.579:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.055872] audit: type=1006 audit(1560265993.586:33): pid=1039 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   17.096757] audit: type=1130 audit(1560265993.626:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.496044] drm: not enough stolen space for compressed buffer (need 36864000 more bytes), disabling. Hint: you may be able to increase stolen memory size in the BIOS to avoid this.
[   20.387234] audit: type=1111 audit(1560265996.919:35): pid=566 uid=0 auid=4294967295 ses=4294967295 msg='op=radio-control arg="wireless-enabled" pid=1093 uid=1000 result=success exe="/usr/bin/NetworkManager" hostname=? addr=? terminal=? res=success'
[   20.554303] fuse init (API version 7.29)
[   20.695309] audit: type=1130 audit(1560265997.226:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   24.009461] audit: type=1131 audit(1560266000.539:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.021582] audit: type=1130 audit(1560266001.553:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   35.618277] audit: type=1131 audit(1560266012.153:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

Offline

#4 2019-06-11 15:31:26

seth
Member
Registered: 2012-09-03
Posts: 51,772

Re: 'unable to enumerate USB device' errors

What vendor/model is the docking station?
Does it work when you boot w/o the dock and attach it later™?
Are there more devices attached to the dock or is it merely a(n empty) hub?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2019-06-11 15:38:37

olocin
Member
Registered: 2018-01-03
Posts: 171

Re: 'unable to enumerate USB device' errors

It's a Thinkpad ultra dock.
If I do that, then the errors pop up right after I dock.
There are mouse, keyboard and monitor attached to it.
Notice that everything works, I just get these errors.

Offline

#6 2019-06-11 15:59:29

seth
Member
Registered: 2012-09-03
Posts: 51,772

Re: 'unable to enumerate USB device' errors

a) remove all devices and check whether the dock still causes the errors
b) stuff all slots of the dock (in doubt use a bunch of good usb keys) and check whether the dock still causes the errors

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2019-06-11 16:17:32

olocin
Member
Registered: 2018-01-03
Posts: 171

Re: 'unable to enumerate USB device' errors

I unplugged everything, then started plugging things back, and no error appears anymore.
I still have some empty slots, so it's possible one of these was causing the issue.
Will have to test more, to reach full stuffed dock.

Last edited by olocin (2019-06-11 16:17:50)

Offline

Pages: 1

Board footer

Powered by FluxBB