You are not logged in.

Pages: 1

#1 2019-06-22 15:52:58

mcsimenc
Member
Registered: 2019-06-22
Posts: 16

[SOLVED] RTX 2070 multihead nvidia-settings vs xrandr

Greetings.
I have been setting up Arch on my new workstation. Everything is going well, and I have GNOME running fine upon starting everything....with only one of two monitors I have. The second monitor is being detected: it is the first screen that turns on after I boot the computer, and then when GDM starts up it switches to the other screen. I run 

nvidia-settings

and see that both screens show up with options. If I run 

xrandr

, the port the second monitor is plugged into (DP-1) doesn't show up at all. I also tried Nouveau which didn't work at all (blinking cursor in upper left corner upon DM start). Can anyone shed some light on this for me?

xrandr output:

Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767
DVI-D-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected primary 3840x2160+0+0 (normal left inverted right x axis y axis) 600mm x 340mm
   3840x2160     60.00*+  59.94    50.00    30.00    29.97    25.00    23.98  
   2560x1440     59.95  
   1920x1080     60.00    60.00    59.94    29.97    23.98  
   1600x900      60.00  
   1280x1024     60.02  
   1280x800      59.81  
   1280x720      60.00    59.94  
   1152x864      60.00  
   1024x768      60.00  
   800x600       60.32  
   720x480       59.94  
   640x480       59.94    59.93  
DP-0 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 disconnected (normal left inverted right x axis y axis)

and /etc/X11/xorg.conf does show both monitors

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 430.14

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 430.26

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" RightOf "Screen1"
    Screen      1  "Screen1" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "LG Electronics LG Ultra HD"
    HorizSync       30.0 - 135.0
    VertRefresh     56.0 - 61.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "LG Electronics LG Ultra HD"
    HorizSync       30.0 - 135.0
    VertRefresh     56.0 - 61.0
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce RTX 2070"
    BusID          "PCI:1:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce RTX 2070"
    BusID          "PCI:1:0:0"
    Screen          1
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-1"
    Option         "metamodes" "HDMI-0: nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"

# Removed Option "metamodes" "DP-3: nvidia-auto-select +0+0 {AllowGSYNC=Off}"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "metamodes" "DP-1: nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Last edited by mcsimenc (2019-06-23 20:28:00)

Offline

#2 2019-06-22 21:10:32

seth
Member
Registered: 2012-09-03
Posts: 51,319

Re: [SOLVED] RTX 2070 multihead nvidia-settings vs xrandr

Remove the /etc/X11/xorg.conf (it configures https://wiki.archlinux.org/index.php/Mu … te_screens what is probably not what you want), restart gdm, check xrandr again and post your xorg log in doubt.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2019-06-22 23:02:59

mcsimenc
Member
Registered: 2019-06-22
Posts: 16

Re: [SOLVED] RTX 2070 multihead nvidia-settings vs xrandr

removed /etc/X11/xorg.conf, gdm failed to start.

the logs in /var/log/

# ls -1 /var/log/X*
/var/log/Xorg.0.log

,

Xorg.0.log

[     4.488] (--) Log file renamed from "/var/log/Xorg.pid-626.log" to "/var/log/Xorg.0.log"
[     4.488] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[     4.489] 
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[     4.489] Build Operating System: Linux Arch Linux
[     4.489] Current Operating System: Linux mldesktop 5.1.12-arch1-1-ARCH #1 SMP PREEMPT Wed Jun 19 09:16:00 UTC 2019 x86_64
[     4.489] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a890a3c1-cc91-4aaf-9f2b-a9343094a244 rw quiet nomodeset nouveau.modeset=0
[     4.489] Build Date: 30 May 2019  06:44:40PM
[     4.489]  
[     4.489] Current version of pixman: 0.38.4
[     4.489] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     4.489] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     4.489] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 22 23:05:25 2019
[     4.490] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     4.491] (==) No Layout section.  Using the first Screen section.
[     4.491] (==) No screen section available. Using defaults.
[     4.491] (**) |-->Screen "Default Screen Section" (0)
[     4.491] (**) |   |-->Monitor "<default monitor>"
[     4.491] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     4.491] (==) Automatically adding devices
[     4.491] (==) Automatically enabling devices
[     4.491] (==) Automatically adding GPU devices
[     4.491] (==) Automatically binding GPU devices
[     4.491] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     4.492] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[     4.492] 	Entry deleted from font path.
[     4.492] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[     4.492] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[     4.492] 	Entry deleted from font path.
[     4.492] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     4.492] 	Entry deleted from font path.
[     4.492] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     4.492] 	Entry deleted from font path.
[     4.493] (==) FontPath set to:
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[     4.493] (==) ModulePath set to "/usr/lib/xorg/modules"
[     4.493] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     4.493] (II) Module ABI versions:
[     4.493] 	X.Org ANSI C Emulation: 0.4
[     4.493] 	X.Org Video Driver: 24.0
[     4.493] 	X.Org XInput driver : 24.1
[     4.493] 	X.Org Server Extension : 10.0
[     4.493] (++) using VT number 1

[     4.494] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[     4.494] (II) xfree86: Adding drm device (/dev/dri/card0)
[     4.495] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[     4.496] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[     4.496] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[     4.496] (--) PCI:*(1@0:0:0) 10de:1f02:196e:1300 rev 161, Mem @ 0xa3000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/131072
[     4.496] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     4.496] (II) LoadModule: "glx"
[     4.498] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     4.510] (II) Module glx: vendor="X.Org Foundation"
[     4.510] 	compiled for 1.20.5, module version = 1.0.0
[     4.510] 	ABI class: X.Org Server Extension, version 10.0
[     4.510] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[     4.510] 	loading driver: nvidia
[     4.510] (==) Matched nvidia as autoconfigured driver 0
[     4.510] (==) Matched nouveau as autoconfigured driver 1
[     4.510] (==) Matched nv as autoconfigured driver 2
[     4.510] (==) Matched modesetting as autoconfigured driver 3
[     4.510] (==) Matched fbdev as autoconfigured driver 4
[     4.510] (==) Matched vesa as autoconfigured driver 5
[     4.510] (==) Assigned the driver to the xf86ConfigLayout
[     4.510] (II) LoadModule: "nvidia"
[     4.510] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     4.516] (II) Module nvidia: vendor="NVIDIA Corporation"
[     4.516] 	compiled for 1.6.99.901, module version = 1.0.0
[     4.516] 	Module class: X.Org Video Driver
[     4.516] (II) LoadModule: "nouveau"
[     4.518] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     4.520] (II) Module nouveau: vendor="X.Org Foundation"
[     4.520] 	compiled for 1.20.3, module version = 1.0.16
[     4.520] 	Module class: X.Org Video Driver
[     4.520] 	ABI class: X.Org Video Driver, version 24.0
[     4.520] (II) LoadModule: "nv"
[     4.521] (WW) Warning, couldn't open module nv
[     4.521] (EE) Failed to load module "nv" (module does not exist, 0)
[     4.521] (II) LoadModule: "modesetting"
[     4.522] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     4.525] (II) Module modesetting: vendor="X.Org Foundation"
[     4.525] 	compiled for 1.20.5, module version = 1.20.5
[     4.525] 	Module class: X.Org Video Driver
[     4.525] 	ABI class: X.Org Video Driver, version 24.0
[     4.525] (II) LoadModule: "fbdev"
[     4.525] (WW) Warning, couldn't open module fbdev
[     4.525] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     4.525] (II) LoadModule: "vesa"
[     4.526] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     4.526] (II) Module vesa: vendor="X.Org Foundation"
[     4.526] 	compiled for 1.20.0, module version = 2.4.0
[     4.526] 	Module class: X.Org Video Driver
[     4.526] 	ABI class: X.Org Video Driver, version 24.0
[     4.527] (II) NVIDIA dlloader X Driver  430.26  Tue Jun  4 17:52:10 CDT 2019
[     4.527] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     4.527] (II) NOUVEAU driver 
[     4.527] (II) NOUVEAU driver for NVIDIA chipset families :
[     4.527] 	RIVA TNT            (NV04)
[     4.527] 	RIVA TNT2           (NV05)
[     4.528] 	GeForce 256         (NV10)
[     4.528] 	GeForce 2           (NV11, NV15)
[     4.528] 	GeForce 4MX         (NV17, NV18)
[     4.528] 	GeForce 3           (NV20)
[     4.528] 	GeForce 4Ti         (NV25, NV28)
[     4.528] 	GeForce FX          (NV3x)
[     4.528] 	GeForce 6           (NV4x)
[     4.529] 	GeForce 7           (G7x)
[     4.529] 	GeForce 8           (G8x)
[     4.529] 	GeForce 9           (G9x)
[     4.529] 	GeForce GTX 2xx/3xx (GT2xx)
[     4.529] 	GeForce GTX 4xx/5xx (GFxxx)
[     4.529] 	GeForce GTX 6xx/7xx (GKxxx)
[     4.529] 	GeForce GTX 9xx     (GMxxx)
[     4.529] 	GeForce GTX 10xx    (GPxxx)
[     4.529] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     4.529] (II) VESA: driver for VESA chipsets: vesa
[     4.529] (II) systemd-logind: releasing fd for 226:0
[     4.531] (II) Loading sub module "fb"
[     4.531] (II) LoadModule: "fb"
[     4.531] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.532] (II) Module fb: vendor="X.Org Foundation"
[     4.532] 	compiled for 1.20.5, module version = 1.0.0
[     4.532] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     4.532] (II) Loading sub module "wfb"
[     4.532] (II) LoadModule: "wfb"
[     4.533] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     4.534] (II) Module wfb: vendor="X.Org Foundation"
[     4.534] 	compiled for 1.20.5, module version = 1.0.0
[     4.534] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     4.534] (II) Loading sub module "ramdac"
[     4.534] (II) LoadModule: "ramdac"
[     4.534] (II) Module "ramdac" already built-in
[     4.536] (WW) Falling back to old probe method for modesetting
[     4.537] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     4.537] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[     4.537] (==) NVIDIA(0): RGB weight 888
[     4.537] (==) NVIDIA(0): Default visual is TrueColor
[     4.537] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     4.537] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[     4.537] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[     4.538] (**) NVIDIA(0): Enabling 2D acceleration
[     4.538] (II) Loading sub module "glxserver_nvidia"
[     4.538] (II) LoadModule: "glxserver_nvidia"
[     4.538] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[     4.571] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[     4.571] 	compiled for 1.6.99.901, module version = 1.0.0
[     4.571] 	Module class: X.Org Server Extension
[     4.572] (II) NVIDIA GLX Module  430.26  Tue Jun  4 17:50:01 CDT 2019
[     5.546] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[     5.546] (--) NVIDIA(0):     DFP-0
[     5.546] (--) NVIDIA(0):     DFP-1
[     5.546] (--) NVIDIA(0):     DFP-2
[     5.546] (--) NVIDIA(0):     DFP-3 (boot)
[     5.546] (--) NVIDIA(0):     DFP-4
[     5.546] (--) NVIDIA(0):     DFP-5
[     5.546] (--) NVIDIA(0):     DFP-6
[     5.546] (--) NVIDIA(0):     DFP-7
[     5.547] (II) NVIDIA(0): NVIDIA GPU GeForce RTX 2070 (TU106-A) at PCI:1:0:0 (GPU-0)
[     5.547] (--) NVIDIA(0): Memory: 8388608 kBytes
[     5.547] (--) NVIDIA(0): VideoBIOS: 90.06.18.80.0c
[     5.547] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     5.547] (--) NVIDIA(GPU-0): DFP-0: disconnected
[     5.547] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[     5.547] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[     5.547] (--) NVIDIA(GPU-0): 
[     5.576] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-1): connected
[     5.576] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-1): Internal TMDS
[     5.576] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-1): 600.0 MHz maximum pixel clock
[     5.576] (--) NVIDIA(GPU-0): 
[     5.576] (--) NVIDIA(GPU-0): DFP-2: disconnected
[     5.576] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[     5.576] (--) NVIDIA(GPU-0): DFP-2: 2660.0 MHz maximum pixel clock
[     5.576] (--) NVIDIA(GPU-0): 
[     5.639] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-3): connected
[     5.639] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-3): Internal TMDS
[     5.639] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-3): 600.0 MHz maximum pixel clock
[     5.639] (--) NVIDIA(GPU-0): 
[     5.639] (--) NVIDIA(GPU-0): DFP-4: disconnected
[     5.639] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[     5.639] (--) NVIDIA(GPU-0): DFP-4: 2660.0 MHz maximum pixel clock
[     5.639] (--) NVIDIA(GPU-0): 
[     5.639] (--) NVIDIA(GPU-0): DFP-5: disconnected
[     5.639] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[     5.639] (--) NVIDIA(GPU-0): DFP-5: 165.0 MHz maximum pixel clock
[     5.639] (--) NVIDIA(GPU-0): 
[     5.639] (--) NVIDIA(GPU-0): DFP-6: disconnected
[     5.639] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[     5.639] (--) NVIDIA(GPU-0): DFP-6: 2660.0 MHz maximum pixel clock
[     5.639] (--) NVIDIA(GPU-0): 
[     5.639] (--) NVIDIA(GPU-0): DFP-7: disconnected
[     5.639] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[     5.639] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[     5.639] (--) NVIDIA(GPU-0): 
[     5.701] (==) NVIDIA(0): 
[     5.701] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     5.701] (==) NVIDIA(0):     will be used as the requested mode.
[     5.701] (==) NVIDIA(0): 
[     5.702] (II) NVIDIA(0): Validated MetaModes:
[     5.702] (II) NVIDIA(0):     "DFP-3:nvidia-auto-select,DFP-1:nvidia-auto-select"
[     5.702] (II) NVIDIA(0): Virtual screen size determined to be 7680 x 2160
[     5.742] (--) NVIDIA(0): DPI set to (162, 161); computed from "UseEdidDpi" X config
[     5.742] (--) NVIDIA(0):     option
[     5.742] (II) UnloadModule: "nouveau"
[     5.742] (II) Unloading nouveau
[     5.742] (II) UnloadModule: "modesetting"
[     5.743] (II) Unloading modesetting
[     5.743] (II) UnloadModule: "vesa"
[     5.743] (II) Unloading vesa
[     5.743] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[     5.743] (II) NVIDIA:     access.
[     5.745] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     5.745] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     5.745] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     5.745] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     5.745] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     5.745] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     5.745] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     5.745] (II) NVIDIA(0):     Config Options in the README.
[     5.758] (II) NVIDIA(0): Setting mode "DFP-3:nvidia-auto-select,DFP-1:nvidia-auto-select"
[     6.035] (==) NVIDIA(0): Disabling shared memory pixmaps
[     6.035] (==) NVIDIA(0): Backing store enabled
[     6.035] (==) NVIDIA(0): Silken mouse disabled
[     6.035] (==) NVIDIA(0): DPMS enabled
[     6.036] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[     6.036] (II) Loading sub module "dri2"
[     6.036] (II) LoadModule: "dri2"
[     6.036] (II) Module "dri2" already built-in
[     6.036] (II) NVIDIA(0): [DRI2] Setup complete
[     6.036] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     6.036] (II) Initializing extension Generic Event Extension
[     6.036] (II) Initializing extension SHAPE
[     6.036] (II) Initializing extension MIT-SHM
[     6.036] (II) Initializing extension XInputExtension
[     6.036] (II) Initializing extension XTEST
[     6.036] (II) Initializing extension BIG-REQUESTS
[     6.036] (II) Initializing extension SYNC
[     6.036] (II) Initializing extension XKEYBOARD
[     6.036] (II) Initializing extension XC-MISC
[     6.036] (II) Initializing extension SECURITY
[     6.036] (II) Initializing extension XFIXES
[     6.036] (II) Initializing extension RENDER
[     6.036] (II) Initializing extension RANDR
[     6.036] (II) Initializing extension COMPOSITE
[     6.036] (II) Initializing extension DAMAGE
[     6.036] (II) Initializing extension MIT-SCREEN-SAVER
[     6.036] (II) Initializing extension DOUBLE-BUFFER
[     6.036] (II) Initializing extension RECORD
[     6.036] (II) Initializing extension DPMS
[     6.036] (II) Initializing extension Present
[     6.036] (II) Initializing extension DRI3
[     6.036] (II) Initializing extension X-Resource
[     6.036] (II) Initializing extension XVideo
[     6.036] (II) Initializing extension XVideo-MotionCompensation
[     6.036] (II) Initializing extension GLX
[     6.036] (II) Initializing extension GLX
[     6.036] (II) Indirect GLX disabled.
[     6.037] (II) GLX: Another vendor is already registered for screen 0
[     6.037] (II) Initializing extension XFree86-VidModeExtension
[     6.037] (II) Initializing extension XFree86-DGA
[     6.037] (II) Initializing extension XFree86-DRI
[     6.037] (II) Initializing extension DRI2
[     6.037] (II) Initializing extension NV-GLX
[     6.037] (II) Initializing extension NV-CONTROL
[     6.037] (II) Initializing extension XINERAMA
[     6.090] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     6.090] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.090] (II) LoadModule: "libinput"
[     6.090] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     6.093] (II) Module libinput: vendor="X.Org Foundation"
[     6.093] 	compiled for 1.20.3, module version = 0.28.2
[     6.093] 	Module class: X.Org XInput Driver
[     6.093] 	ABI class: X.Org XInput driver, version 24.1
[     6.093] (II) Using input driver 'libinput' for 'Power Button'
[     6.093] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 32 paused 0
[     6.093] (**) Power Button: always reports core events
[     6.093] (**) Option "Device" "/dev/input/event2"
[     6.093] (**) Option "_source" "server/udev"
[     6.097] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     6.097] (II) event2  - Power Button: device is a keyboard
[     6.097] (II) event2  - Power Button: device removed
[     6.097] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     6.097] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.098] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     6.098] (II) event2  - Power Button: device is a keyboard
[     6.098] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     6.098] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.098] (II) Using input driver 'libinput' for 'Power Button'
[     6.098] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 35 paused 0
[     6.098] (**) Power Button: always reports core events
[     6.098] (**) Option "Device" "/dev/input/event1"
[     6.098] (**) Option "_source" "server/udev"
[     6.099] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     6.099] (II) event1  - Power Button: device is a keyboard
[     6.099] (II) event1  - Power Button: device removed
[     6.099] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     6.099] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     6.099] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     6.099] (II) event1  - Power Button: device is a keyboard
[     6.099] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[     6.099] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     6.099] (II) Using input driver 'libinput' for 'Sleep Button'
[     6.100] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 36 paused 0
[     6.100] (**) Sleep Button: always reports core events
[     6.100] (**) Option "Device" "/dev/input/event0"
[     6.100] (**) Option "_source" "server/udev"
[     6.100] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[     6.100] (II) event0  - Sleep Button: device is a keyboard
[     6.100] (II) event0  - Sleep Button: device removed
[     6.100] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[     6.100] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     6.101] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[     6.101] (II) event0  - Sleep Button: device is a keyboard
[     6.101] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[     6.101] (II) No input driver specified, ignoring this device.
[     6.101] (II) This device may have been added with another device file.
[     6.101] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event18)
[     6.101] (II) No input driver specified, ignoring this device.
[     6.101] (II) This device may have been added with another device file.
[     6.101] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event19)
[     6.101] (II) No input driver specified, ignoring this device.
[     6.101] (II) This device may have been added with another device file.
[     6.101] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event20)
[     6.102] (II) No input driver specified, ignoring this device.
[     6.102] (II) This device may have been added with another device file.
[     6.102] (II) config/udev: Adding input device Macally Peripherals Macally USB Keyboard (/dev/input/event3)
[     6.102] (**) Macally Peripherals Macally USB Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.102] (II) Using input driver 'libinput' for 'Macally Peripherals Macally USB Keyboard'
[     6.102] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 37 paused 0
[     6.102] (**) Macally Peripherals Macally USB Keyboard: always reports core events
[     6.102] (**) Option "Device" "/dev/input/event3"
[     6.102] (**) Option "_source" "server/udev"
[     6.103] (II) event3  - Macally Peripherals Macally USB Keyboard: is tagged by udev as: Keyboard
[     6.103] (II) event3  - Macally Peripherals Macally USB Keyboard: device is a keyboard
[     6.103] (II) event3  - Macally Peripherals Macally USB Keyboard: device removed
[     6.103] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:2222:0018.0001/input/input3/event3"
[     6.103] (II) XINPUT: Adding extended input device "Macally Peripherals Macally USB Keyboard" (type: KEYBOARD, id 9)
[     6.104] (II) event3  - Macally Peripherals Macally USB Keyboard: is tagged by udev as: Keyboard
[     6.104] (II) event3  - Macally Peripherals Macally USB Keyboard: device is a keyboard
[     6.104] (II) config/udev: Adding input device Macally Peripherals Macally USB Keyboard Consumer Control (/dev/input/event4)
[     6.104] (**) Macally Peripherals Macally USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[     6.104] (II) Using input driver 'libinput' for 'Macally Peripherals Macally USB Keyboard Consumer Control'
[     6.105] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 38 paused 0
[     6.105] (**) Macally Peripherals Macally USB Keyboard Consumer Control: always reports core events
[     6.105] (**) Option "Device" "/dev/input/event4"
[     6.105] (**) Option "_source" "server/udev"
[     6.105] (II) event4  - Macally Peripherals Macally USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[     6.105] (II) event4  - Macally Peripherals Macally USB Keyboard Consumer Control: device is a keyboard
[     6.105] (II) event4  - Macally Peripherals Macally USB Keyboard Consumer Control: device removed
[     6.105] (II) libinput: Macally Peripherals Macally USB Keyboard Consumer Control: needs a virtual subdevice
[     6.105] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:2222:0018.0002/input/input4/event4"
[     6.105] (II) XINPUT: Adding extended input device "Macally Peripherals Macally USB Keyboard Consumer Control" (type: MOUSE, id 10)
[     6.105] (**) Option "AccelerationScheme" "none"
[     6.105] (**) Macally Peripherals Macally USB Keyboard Consumer Control: (accel) selected scheme none/0
[     6.105] (**) Macally Peripherals Macally USB Keyboard Consumer Control: (accel) acceleration factor: 2.000
[     6.105] (**) Macally Peripherals Macally USB Keyboard Consumer Control: (accel) acceleration threshold: 4
[     6.106] (II) event4  - Macally Peripherals Macally USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[     6.106] (II) event4  - Macally Peripherals Macally USB Keyboard Consumer Control: device is a keyboard
[     6.106] (II) config/udev: Adding input device Macally Peripherals Macally USB Keyboard System Control (/dev/input/event5)
[     6.106] (**) Macally Peripherals Macally USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[     6.106] (II) Using input driver 'libinput' for 'Macally Peripherals Macally USB Keyboard System Control'
[     6.107] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 39 paused 0
[     6.107] (**) Macally Peripherals Macally USB Keyboard System Control: always reports core events
[     6.107] (**) Option "Device" "/dev/input/event5"
[     6.107] (**) Option "_source" "server/udev"
[     6.107] (II) event5  - Macally Peripherals Macally USB Keyboard System Control: is tagged by udev as: Keyboard
[     6.107] (II) event5  - Macally Peripherals Macally USB Keyboard System Control: device is a keyboard
[     6.107] (II) event5  - Macally Peripherals Macally USB Keyboard System Control: device removed
[     6.107] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:2222:0018.0002/input/input5/event5"
[     6.107] (II) XINPUT: Adding extended input device "Macally Peripherals Macally USB Keyboard System Control" (type: KEYBOARD, id 11)
[     6.108] (II) event5  - Macally Peripherals Macally USB Keyboard System Control: is tagged by udev as: Keyboard
[     6.108] (II) event5  - Macally Peripherals Macally USB Keyboard System Control: device is a keyboard
[     6.108] (II) config/udev: Adding input device Kensington Pro Fit Wired Windows 8 Mouse (/dev/input/event6)
[     6.108] (**) Kensington Pro Fit Wired Windows 8 Mouse: Applying InputClass "libinput keyboard catchall"
[     6.108] (II) Using input driver 'libinput' for 'Kensington Pro Fit Wired Windows 8 Mouse'
[     6.109] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 40 paused 0
[     6.109] (**) Kensington Pro Fit Wired Windows 8 Mouse: always reports core events
[     6.109] (**) Option "Device" "/dev/input/event6"
[     6.109] (**) Option "_source" "server/udev"
[     6.109] (II) event6  - Kensington Pro Fit Wired Windows 8 Mouse: is tagged by udev as: Keyboard
[     6.109] (II) event6  - Kensington Pro Fit Wired Windows 8 Mouse: device is a keyboard
[     6.109] (II) event6  - Kensington Pro Fit Wired Windows 8 Mouse: device removed
[     6.109] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:047D:8012.0003/input/input6/event6"
[     6.109] (II) XINPUT: Adding extended input device "Kensington Pro Fit Wired Windows 8 Mouse" (type: KEYBOARD, id 12)
[     6.110] (II) event6  - Kensington Pro Fit Wired Windows 8 Mouse: is tagged by udev as: Keyboard
[     6.110] (II) event6  - Kensington Pro Fit Wired Windows 8 Mouse: device is a keyboard
[     6.110] (II) config/udev: Adding input device Kensington Pro Fit Wired Windows 8 Mouse (/dev/input/event7)
[     6.110] (**) Kensington Pro Fit Wired Windows 8 Mouse: Applying InputClass "libinput pointer catchall"
[     6.110] (II) Using input driver 'libinput' for 'Kensington Pro Fit Wired Windows 8 Mouse'
[     6.166] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 41 paused 0
[     6.166] (**) Kensington Pro Fit Wired Windows 8 Mouse: always reports core events
[     6.166] (**) Option "Device" "/dev/input/event7"
[     6.166] (**) Option "_source" "server/udev"
[     6.169] (II) event7  - Kensington Pro Fit Wired Windows 8 Mouse: is tagged by udev as: Mouse
[     6.169] (II) event7  - Kensington Pro Fit Wired Windows 8 Mouse: device is a pointer
[     6.169] (II) event7  - Kensington Pro Fit Wired Windows 8 Mouse: device removed
[     6.170] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:047D:8012.0004/input/input7/event7"
[     6.170] (II) XINPUT: Adding extended input device "Kensington Pro Fit Wired Windows 8 Mouse" (type: MOUSE, id 13)
[     6.170] (**) Option "AccelerationScheme" "none"
[     6.170] (**) Kensington Pro Fit Wired Windows 8 Mouse: (accel) selected scheme none/0
[     6.170] (**) Kensington Pro Fit Wired Windows 8 Mouse: (accel) acceleration factor: 2.000
[     6.170] (**) Kensington Pro Fit Wired Windows 8 Mouse: (accel) acceleration threshold: 4
[     6.171] (II) event7  - Kensington Pro Fit Wired Windows 8 Mouse: is tagged by udev as: Mouse
[     6.171] (II) event7  - Kensington Pro Fit Wired Windows 8 Mouse: device is a pointer
[     6.172] (II) config/udev: Adding input device Kensington Pro Fit Wired Windows 8 Mouse (/dev/input/mouse0)
[     6.172] (II) No input driver specified, ignoring this device.
[     6.172] (II) This device may have been added with another device file.
[     6.172] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[     6.172] (II) No input driver specified, ignoring this device.
[     6.172] (II) This device may have been added with another device file.
[     6.172] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[     6.172] (II) No input driver specified, ignoring this device.
[     6.172] (II) This device may have been added with another device file.
[     6.172] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[     6.172] (II) No input driver specified, ignoring this device.
[     6.172] (II) This device may have been added with another device file.
[     6.172] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event13)
[     6.172] (II) No input driver specified, ignoring this device.
[     6.172] (II) This device may have been added with another device file.
[     6.173] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event14)
[     6.173] (II) No input driver specified, ignoring this device.
[     6.173] (II) This device may have been added with another device file.
[     6.173] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event15)
[     6.173] (II) No input driver specified, ignoring this device.
[     6.173] (II) This device may have been added with another device file.
[     6.173] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event16)
[     6.173] (II) No input driver specified, ignoring this device.
[     6.173] (II) This device may have been added with another device file.
[     6.173] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event9)
[     6.173] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     6.173] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[     6.173] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 42 paused 0
[     6.173] (**) Eee PC WMI hotkeys: always reports core events
[     6.173] (**) Option "Device" "/dev/input/event9"
[     6.174] (**) Option "_source" "server/udev"
[     6.174] (II) event9  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[     6.174] (II) event9  - Eee PC WMI hotkeys: device is a keyboard
[     6.174] (II) event9  - Eee PC WMI hotkeys: device removed
[     6.174] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input9/event9"
[     6.174] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 14)
[     6.174] (II) event9  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[     6.174] (II) event9  - Eee PC WMI hotkeys: device is a keyboard
[     6.175] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[     6.175] (II) No input driver specified, ignoring this device.
[     6.175] (II) This device may have been added with another device file.
[     6.176] (**) Macally Peripherals Macally USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[     6.176] (II) Using input driver 'libinput' for 'Macally Peripherals Macally USB Keyboard Consumer Control'
[     6.176] (II) systemd-logind: returning pre-existing fd for /dev/input/event4 13:68
[     6.176] (**) Macally Peripherals Macally USB Keyboard Consumer Control: always reports core events
[     6.176] (**) Option "Device" "/dev/input/event4"
[     6.176] (**) Option "_source" "_driver/libinput"
[     6.176] (II) libinput: Macally Peripherals Macally USB Keyboard Consumer Control: is a virtual subdevice
[     6.176] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:2222:0018.0002/input/input4/event4"
[     6.176] (II) XINPUT: Adding extended input device "Macally Peripherals Macally USB Keyboard Consumer Control" (type: KEYBOARD, id 15)
[     6.243] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-3): connected
[     6.243] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-3): Internal TMDS
[     6.243] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-3): 600.0 MHz maximum pixel clock
[     6.243] (--) NVIDIA(GPU-0): 
[     6.310] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-3): connected
[     6.310] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-3): Internal TMDS
[     6.310] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-3): 600.0 MHz maximum pixel clock
[     6.310] (--) NVIDIA(GPU-0): 
[     6.538] (--) NVIDIA(GPU-0): DFP-0: disconnected
[     6.538] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[     6.538] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[     6.538] (--) NVIDIA(GPU-0): 
[     6.571] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-1): connected
[     6.571] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-1): Internal TMDS
[     6.571] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-1): 600.0 MHz maximum pixel clock
[     6.571] (--) NVIDIA(GPU-0): 
[     6.571] (--) NVIDIA(GPU-0): DFP-2: disconnected
[     6.571] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[     6.571] (--) NVIDIA(GPU-0): DFP-2: 2660.0 MHz maximum pixel clock
[     6.571] (--) NVIDIA(GPU-0): 
[     6.637] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-3): connected
[     6.637] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-3): Internal TMDS
[     6.637] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-3): 600.0 MHz maximum pixel clock
[     6.637] (--) NVIDIA(GPU-0): 
[     6.637] (--) NVIDIA(GPU-0): DFP-4: disconnected
[     6.637] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[     6.637] (--) NVIDIA(GPU-0): DFP-4: 2660.0 MHz maximum pixel clock
[     6.637] (--) NVIDIA(GPU-0): 
[     6.637] (--) NVIDIA(GPU-0): DFP-5: disconnected
[     6.637] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[     6.637] (--) NVIDIA(GPU-0): DFP-5: 165.0 MHz maximum pixel clock
[     6.637] (--) NVIDIA(GPU-0): 
[     6.637] (--) NVIDIA(GPU-0): DFP-6: disconnected
[     6.637] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[     6.637] (--) NVIDIA(GPU-0): DFP-6: 2660.0 MHz maximum pixel clock
[     6.637] (--) NVIDIA(GPU-0): 
[     6.638] (--) NVIDIA(GPU-0): DFP-7: disconnected
[     6.638] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[     6.638] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[     6.638] (--) NVIDIA(GPU-0): 
[     7.398] (--) NVIDIA(GPU-0): DFP-0: disconnected
[     7.398] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[     7.398] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[     7.398] (--) NVIDIA(GPU-0): 
[     7.460] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-1): connected
[     7.460] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-1): Internal TMDS
[     7.460] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-1): 600.0 MHz maximum pixel clock
[     7.460] (--) NVIDIA(GPU-0): 
[     7.460] (--) NVIDIA(GPU-0): DFP-2: disconnected
[     7.460] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[     7.460] (--) NVIDIA(GPU-0): DFP-2: 2660.0 MHz maximum pixel clock
[     7.460] (--) NVIDIA(GPU-0): 
[     7.527] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-3): connected
[     7.527] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-3): Internal TMDS
[     7.527] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-3): 600.0 MHz maximum pixel clock
[     7.527] (--) NVIDIA(GPU-0): 
[     7.527] (--) NVIDIA(GPU-0): DFP-4: disconnected
[     7.527] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[     7.527] (--) NVIDIA(GPU-0): DFP-4: 2660.0 MHz maximum pixel clock
[     7.527] (--) NVIDIA(GPU-0): 
[     7.527] (--) NVIDIA(GPU-0): DFP-5: disconnected
[     7.527] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[     7.527] (--) NVIDIA(GPU-0): DFP-5: 165.0 MHz maximum pixel clock
[     7.527] (--) NVIDIA(GPU-0): 
[     7.527] (--) NVIDIA(GPU-0): DFP-6: disconnected
[     7.527] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[     7.527] (--) NVIDIA(GPU-0): DFP-6: 2660.0 MHz maximum pixel clock
[     7.527] (--) NVIDIA(GPU-0): 
[     7.527] (--) NVIDIA(GPU-0): DFP-7: disconnected
[     7.527] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[     7.527] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[     7.527] (--) NVIDIA(GPU-0): 
[     7.847] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-1): connected
[     7.847] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-1): Internal TMDS
[     7.847] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-1): 600.0 MHz maximum pixel clock
[     7.847] (--) NVIDIA(GPU-0): 
[     7.879] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-1): connected
[     7.879] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-1): Internal TMDS
[     7.879] (--) NVIDIA(GPU-0): LG Electronics LG Ultra HD (DFP-1): 600.0 MHz maximum pixel clock
[     7.879] (--) NVIDIA(GPU-0): 
[    21.653] (**) Option "fd" "32"
[    21.653] (II) event2  - Power Button: device removed
[    21.653] (**) Option "fd" "35"
[    21.653] (II) event1  - Power Button: device removed
[    21.654] (**) Option "fd" "36"
[    21.654] (II) event0  - Sleep Button: device removed
[    21.654] (**) Option "fd" "37"
[    21.654] (II) event3  - Macally Peripherals Macally USB Keyboard: device removed
[    21.654] (**) Option "fd" "38"
[    21.654] (**) Option "fd" "39"
[    21.654] (II) event5  - Macally Peripherals Macally USB Keyboard System Control: device removed
[    21.654] (**) Option "fd" "40"
[    21.654] (II) event6  - Kensington Pro Fit Wired Windows 8 Mouse: device removed
[    21.654] (**) Option "fd" "41"
[    21.654] (II) event7  - Kensington Pro Fit Wired Windows 8 Mouse: device removed
[    21.654] (**) Option "fd" "42"
[    21.654] (II) event9  - Eee PC WMI hotkeys: device removed
[    21.654] (**) Option "fd" "38"
[    21.654] (II) event4  - Macally Peripherals Macally USB Keyboard Consumer Control: device removed
[    21.949] (II) systemd-logind: got pause for 13:73
[    21.949] (II) systemd-logind: got pause for 13:70
[    21.949] (II) systemd-logind: got pause for 13:65
[    21.949] (II) systemd-logind: got pause for 13:69
[    21.949] (II) systemd-logind: got pause for 13:68
[    21.949] (II) systemd-logind: got pause for 13:67
[    21.950] (II) systemd-logind: got pause for 13:64
[    21.950] (II) systemd-logind: got pause for 13:66
[    21.950] (II) systemd-logind: got pause for 13:71

I see ACPI failed to connect, but the tips and trick section of the NVIDIA Arch docs say that's a benign message.

I have this block repeated many times in my journalctl output

Jun 22 21:59:08 mldesktop gnome-shell[963]: gdk_window_get_screen: assertion 'GDK_IS_WINDOW (window)' failed
Jun 22 21:59:08 mldesktop gnome-shell[963]: gdk_screen_get_root_window: assertion 'GDK_IS_SCREEN (screen)' failed
Jun 22 21:59:08 mldesktop gnome-shell[963]: gdk_device_get_state: assertion 'GDK_IS_WINDOW (window)' failed

Last edited by mcsimenc (2019-06-23 06:14:10)

Offline

#4 2019-06-23 05:30:00

seth
Member
Registered: 2012-09-03
Posts: 51,319

Re: [SOLVED] RTX 2070 multihead nvidia-settings vs xrandr

Both logs still contain /etc/X11/xorg.conf …

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2019-06-23 06:15:19

mcsimenc
Member
Registered: 2019-06-22
Posts: 16

Re: [SOLVED] RTX 2070 multihead nvidia-settings vs xrandr

Sorry about that seth. I changed the log in the previous post to the one from after removing /etc/X11/xorg.conf

Offline

#6 2019-06-23 08:46:21

seth
Member
Registered: 2012-09-03
Posts: 51,319

Re: [SOLVED] RTX 2070 multihead nvidia-settings vs xrandr

It's not a problem w/ the x11 server (that's running fine)
=> "sudo journalctl -b"?

Also try to convince gdm to use X11, https://wiki.archlinux.org/index.php/GD … rg_backend

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2019-06-23 09:19:28

mcsimenc
Member
Registered: 2019-06-22
Posts: 16

Re: [SOLVED] RTX 2070 multihead nvidia-settings vs xrandr

seth, thank you so much for your rapid responses. I already learned some more about Arch just by interacting with experts here. I hope you're getting paid. Sheepishly I have to admit that I just tried a new DisplayPort cable and the problem is fixed. cheers

matt

Offline

#8 2019-06-23 09:42:24

seth
Member
Registered: 2012-09-03
Posts: 51,319

Re: [SOLVED] RTX 2070 multihead nvidia-settings vs xrandr

Not for this, no. Maybe in Karma points ;-)

Please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#9 2019-06-23 09:44:10

mcsimenc
Member
Registered: 2019-06-22
Posts: 16

Re: [SOLVED] RTX 2070 multihead nvidia-settings vs xrandr

although, now my 2nd screen works (I can use the mouse on it) but xrandr still doesn't pick it up,

$ xrandr
Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767
DVI-D-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected primary 3840x2160+0+0 (normal left inverted right x axis y axis) 600mm x 340mm
   3840x2160     60.00*+  59.94    50.00    30.00    29.97    25.00    23.98  
   2560x1440     59.95  
   1920x1080     60.00    60.00    59.94    29.97    23.98  
   1600x900      60.00  
   1280x1024     60.02  
   1280x800      59.81  
   1280x720      60.00    59.94  
   1152x864      60.00  
   1024x768      60.00  
   800x600       60.32  
   720x480       59.94  
   640x480       59.94    59.93  
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 disconnected (normal left inverted right x axis y axis)

Cool well thank you. I'll pay it forward in some way. Got it, will do. Should I post this as a new issue? Thanks.

Last edited by mcsimenc (2019-06-23 09:46:33)

Offline

#10 2019-06-23 09:45:44

seth
Member
Registered: 2012-09-03
Posts: 51,319

Re: [SOLVED] RTX 2070 multihead nvidia-settings vs xrandr

Did you restore the xorg config? Because then this will happen.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#11 2019-06-23 09:49:08

mcsimenc
Member
Registered: 2019-06-22
Posts: 16

Re: [SOLVED] RTX 2070 multihead nvidia-settings vs xrandr

I did restore the xorg config. When I removed it the DM failed to start. Recommendation? Seek a way around that?

Offline

#12 2019-06-23 09:50:27

seth
Member
Registered: 2012-09-03
Posts: 51,319

Re: [SOLVED] RTX 2070 multihead nvidia-settings vs xrandr

Remove the xorg config and deal w/ the GDM situation, see https://bbs.archlinux.org/viewtopic.php … 0#p1851290

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#13 2019-06-23 20:26:01

mcsimenc
Member
Registered: 2019-06-22
Posts: 16

Re: [SOLVED] RTX 2070 multihead nvidia-settings vs xrandr

I must have been doing something else wrong last night because today I removed /etc/X11/xorg.config GDM starts and we're all good. seth thanks again for your help.

Offline

Pages: 1

Board footer

Powered by FluxBB