You are not logged in.

Pages: 1

#1 2019-08-04 11:43:53

ProtonArch
Member
Registered: 2017-02-26
Posts: 10

Screen tearing and the fix at Arch Wiki

I have an issue with screen tearing, when scrolling in web pages. So I read this:

https://wiki.archlinux.org/index.php/NV … en_tearing

, and the command

$ nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }"

solved it. But according to the Wiki, to make it permanent, you have to make

/etc/X11/xorg.conf.d/20-nvidia.conf

Section "Device"
        Identifier "Nvidia Card"
        Driver     "nvidia"
        VendorName "NVIDIA Corporation"
        BoardName  "GeForce GTX 1050 Ti"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    Option         "metamodes" "nvidia-auto-select +0+0 {ForceFullCompositionPipeline=On}"
    Option         "AllowIndirectGLXProtocol" "off"
    Option         "TripleBuffer" "on"
EndSection

, but this "fucks up" my system. It gets all black when "startx"... how do I work around this?

What I did, was that I first just added this file to xorg.conf.d/, afterwards i copied /etc/X11/xorg.conf to /etc/X11/xorg.conf.d/20-nvidia.conf, and added the lines to the file.

Last edited by ProtonArch (2019-08-04 13:04:20)

Offline

#2 2019-08-04 12:08:48

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,420

Re: Screen tearing and the fix at Arch Wiki

Please post outputs and commands in [ code ] [ /code ] tags

Remove your "own" generated xorg.conf they usually lead to conflicts with other snippets. Also this fix is often not just "generally" applicable. If your environment already uses a proper compositor, it is counter-productive to enable the fullcompositionpipeline. What environment are you starting which DE/WM, and how? Post config files related to the way you start X and post a Xorg log when running into the black screen issue.

Also clarify "tearing" on websites, is it just websites? Do other standard window movements work? Which browser? FWIW you could also just opt to run the nvidia-settings command during x startup as opposed to a static config, or you might have an issue with triple buffering, and simply commenting that line while keeping the composition pipeline enabled would suffice.

Last edited by V1del (2019-08-04 12:13:15)

Offline

#3 2019-08-04 13:13:12

ProtonArch
Member
Registered: 2017-02-26
Posts: 10

Re: Screen tearing and the fix at Arch Wiki

Is there another solution to this, other than enable the fullcompositionpipeline? Perhaps this issue is not what is called "screen tearing" after all?

I'm using xfce4, and starting with startx:

~/.xinitrc

exec startxfce4

(On a curious note, when I try openbox this doesn't occur.. weird.)

By "tearing" I mean that there are some visual disturbances when scrolling web pages, specially pages with many images. It occurs when I scroll, but stops when I'm finished scrolling. Enabling "smooth scrolling" in the web browsers doesn't fix it. It occurs in every browser.

Shall I post the whole Xorg log? If this can be solved in a way that is more productive I may try that first. smile

Last edited by ProtonArch (2019-08-04 13:14:57)

Offline

#4 2019-08-04 13:27:22

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 15,504

Re: Screen tearing and the fix at Arch Wiki

(On a curious note, when I try openbox this doesn't occur.. weird.)

Since openbox doesn't use any compositor by default, that points to a likely cause : problems with the compositor you're running with xfce.

Are you using xfce with xfwm as window manager ?
If so, https://wiki.archlinux.org/index.php/Xfwm#Video_tearing

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#5 2019-08-04 13:36:37

ProtonArch
Member
Registered: 2017-02-26
Posts: 10

Re: Screen tearing and the fix at Arch Wiki

Lone_Wolf wrote:

Since openbox doesn't use any compositor by default, that points to a likely cause : problems with the compositor you're running with xfce.

Are you using xfce with xfwm as window manager ?
If so, https://wiki.archlinux.org/index.php/Xfwm#Video_tearing

I believe I do, xfwm4 is installed. I just installed the xfce4 package.

Alas, the "Synchronize drawing to the vertical blank option" didn't solve this...

(I Tried openbox again... seems there really are the same issue there, only to a less degree...)

Last edited by ProtonArch (2019-08-04 14:03:54)

Offline

#6 2019-08-04 14:42:02

Slithery
Administrator
From: Norfolk, UK
Registered: 2013-12-01
Posts: 5,776

Re: Screen tearing and the fix at Arch Wiki

ProtonArch wrote:

I'm using xfce4, and starting with startx:

~/.xinitrc

exec startxfce4

Although probably not relevant to your current issue your ~/.xinitrc is broken.
You should read the xinit wiki page and fix it.

No, it didn't "fix" anything. It just shifted the brokeness one space to the right. - jasonwryan
Closing -- for deletion; Banning -- for muppetry. - jasonwryan

aur - dotfiles

Offline

#7 2019-08-04 15:06:21

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,457

Re: Screen tearing and the fix at Arch Wiki

It's an example - and not a very good one…

Try /etc/X11/xorg.conf.d/20-nvidia.conf

Section "Device"
    Identifier "Nvidia Card"
    Driver     "nvidia"
    Option    "metamodes" "nvidia-auto-select +0+0 {ForceFullCompositionPipeline=On}"
    Option    "AllowIndirectGLXProtocol" "off"
    Option    "TripleBuffer" "on"
EndSection

Edit: f****** whitespace
Edit #2: more f****** whitespace

Last edited by seth (2019-08-04 15:07:54)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#8 2019-08-04 15:08:08

ProtonArch
Member
Registered: 2017-02-26
Posts: 10

Re: Screen tearing and the fix at Arch Wiki

Slithery wrote:

Although probably not relevant to your current issue your ~/.xinitrc is broken.
You should read the xinit wiki page and fix it.

Thanks. I read up on it and fixed it now. I don't see any differences in this current issue, but best to keep things in order.

Offline

#9 2019-08-04 15:28:29

ProtonArch
Member
Registered: 2017-02-26
Posts: 10

Re: Screen tearing and the fix at Arch Wiki

I tried doing this enable compositionpipeline graphically and saving this to xorg.conf graphically, but it's just the same problem then. The screen is black. But if I switch to another tty and back, I see the desktop as normal.

Is is safe to paste Xorg log full?

But if it is another solution that is better then compositionpipeline, I would do that first...

seth wrote:

It's an example - and not a very good one…

Try /etc/X11/xorg.conf.d/20-nvidia.conf

Section "Device"
    Identifier "Nvidia Card"
    Driver     "nvidia"
    Option    "metamodes" "nvidia-auto-select +0+0 {ForceFullCompositionPipeline=On}"
    Option    "AllowIndirectGLXProtocol" "off"
    Option    "TripleBuffer" "on"
EndSection

Edit: f****** whitespace
Edit #2: more f****** whitespace

Same problem with this... smile

Last edited by ProtonArch (2019-08-04 15:29:17)

Offline

#10 2019-08-04 15:31:32

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,457

Re: Screen tearing and the fix at Arch Wiki

"graphically" means "using nvidia-settings"? DON'T! It writes you a static xorg.conf full of cruft. Also if your broken 20-nvidia.conf is still around, you'll still have a broken server layout. Remove the generated xorg.conf and fix the 20-nvidia.conf.
You can then post the full Xorg log fine, it contains no private data (unless you chose an embarrassing hostname ;-)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#11 2019-08-04 17:43:30

ProtonArch
Member
Registered: 2017-02-26
Posts: 10

Re: Screen tearing and the fix at Arch Wiki

seth wrote:

"graphically" means "using nvidia-settings"? DON'T! It writes you a static xorg.conf full of cruft. Also if your broken 20-nvidia.conf is still around, you'll still have a broken server layout. Remove the generated xorg.conf and fix the 20-nvidia.conf.
You can then post the full Xorg log fine, it contains no private data (unless you chose an embarrassing hostname ;-)

I have now done this, and tested out .xinitrc this way (same problem as before; black screen; the black screen doesn't come when running this manually afterwards):

nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }"
exec startxfce4

Here is my Xorg log:

[   286.168] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[   286.168] 
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[   286.169] Build Operating System: Linux Arch Linux
[   286.169] Current Operating System: Linux arch 5.2.5-arch1-1-ARCH #1 SMP PREEMPT Wed Jul 31 08:30:34 UTC 2019 x86_64
[   286.169] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=(edited_out) rw
[   286.169] Build Date: 30 June 2019  09:52:01AM
[   286.170]  
[   286.170] Current version of pixman: 0.38.4
[   286.171] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   286.171] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   286.172] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug  4 19:32:20 2019
[   286.172] (==) Using config file: "/etc/X11/xorg.conf"
[   286.172] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   286.173] (==) ServerLayout "Layout0"
[   286.173] (**) |-->Screen "Screen0" (0)
[   286.173] (**) |   |-->Monitor "Monitor0"
[   286.173] (**) |   |-->Device "Device0"
[   286.173] (**) |-->Input Device "Keyboard0"
[   286.173] (**) |-->Input Device "Mouse0"
[   286.173] (==) Automatically adding devices
[   286.173] (==) Automatically enabling devices
[   286.173] (==) Automatically adding GPU devices
[   286.173] (==) Automatically binding GPU devices
[   286.173] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   286.173] (WW) The directory "/usr/share/fonts/misc" does not exist.
[   286.173] 	Entry deleted from font path.
[   286.173] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   286.173] 	Entry deleted from font path.
[   286.173] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   286.173] 	Entry deleted from font path.
[   286.173] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[   286.173] 	Entry deleted from font path.
[   286.173] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[   286.173] 	Entry deleted from font path.
[   286.173] (==) FontPath set to:
	/usr/share/fonts/TTF
[   286.173] (==) ModulePath set to "/usr/lib/xorg/modules"
[   286.173] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   286.173] (WW) Disabling Keyboard0
[   286.173] (WW) Disabling Mouse0
[   286.173] (II) Module ABI versions:
[   286.173] 	X.Org ANSI C Emulation: 0.4
[   286.173] 	X.Org Video Driver: 24.0
[   286.173] 	X.Org XInput driver : 24.1
[   286.173] 	X.Org Server Extension : 10.0
[   286.173] (++) using VT number 1

[   286.174] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[   286.175] (II) xfree86: Adding drm device (/dev/dri/card0)
[   286.175] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[   286.176] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[   286.176] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[   286.176] (--) PCI:*(1@0:0:0) 10de:1c81:3842:6152 rev 161, Mem @ 0xee000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[   286.176] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   286.176] (II) LoadModule: "glx"
[   286.176] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   286.177] (II) Module glx: vendor="X.Org Foundation"
[   286.177] 	compiled for 1.20.5, module version = 1.0.0
[   286.177] 	ABI class: X.Org Server Extension, version 10.0
[   286.177] (II) LoadModule: "nvidia"
[   286.177] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   286.177] (II) Module nvidia: vendor="NVIDIA Corporation"
[   286.177] 	compiled for 1.6.99.901, module version = 1.0.0
[   286.177] 	Module class: X.Org Video Driver
[   286.177] (II) NVIDIA dlloader X Driver  430.40  Sun Jul 21 05:01:54 CDT 2019
[   286.177] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   286.177] (II) systemd-logind: releasing fd for 226:0
[   286.178] (II) Loading sub module "fb"
[   286.178] (II) LoadModule: "fb"
[   286.178] (II) Loading /usr/lib/xorg/modules/libfb.so
[   286.178] (II) Module fb: vendor="X.Org Foundation"
[   286.178] 	compiled for 1.20.5, module version = 1.0.0
[   286.178] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   286.178] (II) Loading sub module "wfb"
[   286.178] (II) LoadModule: "wfb"
[   286.178] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   286.178] (II) Module wfb: vendor="X.Org Foundation"
[   286.178] 	compiled for 1.20.5, module version = 1.0.0
[   286.178] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   286.178] (II) Loading sub module "ramdac"
[   286.178] (II) LoadModule: "ramdac"
[   286.178] (II) Module "ramdac" already built-in
[   286.178] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[   286.178] (==) NVIDIA(0): RGB weight 888
[   286.178] (==) NVIDIA(0): Default visual is TrueColor
[   286.178] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   286.178] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[   286.178] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[   286.179] (**) NVIDIA(0): Enabling 2D acceleration
[   286.179] (II) Loading sub module "glxserver_nvidia"
[   286.179] (II) LoadModule: "glxserver_nvidia"
[   286.179] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[   286.181] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[   286.181] 	compiled for 1.6.99.901, module version = 1.0.0
[   286.181] 	Module class: X.Org Server Extension
[   286.181] (II) NVIDIA GLX Module  430.40  Sun Jul 21 05:00:26 CDT 2019
[   286.487] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[   286.487] (--) NVIDIA(0):     DFP-0
[   286.487] (--) NVIDIA(0):     DFP-1
[   286.487] (--) NVIDIA(0):     DFP-2 (boot)
[   286.487] (--) NVIDIA(0):     DFP-3
[   286.488] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1050 (GP107-A) at PCI:1:0:0 (GPU-0)
[   286.488] (--) NVIDIA(0): Memory: 2097152 kBytes
[   286.488] (--) NVIDIA(0): VideoBIOS: 86.07.39.80.54
[   286.488] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   286.488] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   286.488] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   286.488] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   286.488] (--) NVIDIA(GPU-0): 
[   286.488] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   286.488] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   286.488] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   286.488] (--) NVIDIA(GPU-0): 
[   286.488] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): connected
[   286.488] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): Internal DisplayPort
[   286.488] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): 1440.0 MHz maximum pixel clock
[   286.488] (--) NVIDIA(GPU-0): 
[   286.489] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   286.489] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   286.489] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   286.489] (--) NVIDIA(GPU-0): 
[   286.492] (==) NVIDIA(0): 
[   286.492] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[   286.492] (==) NVIDIA(0):     will be used as the requested mode.
[   286.492] (==) NVIDIA(0): 
[   286.492] (II) NVIDIA(0): Validated MetaModes:
[   286.492] (II) NVIDIA(0):     "DFP-2:nvidia-auto-select"
[   286.492] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1440
[   286.495] (--) NVIDIA(0): DPI set to (108, 107); computed from "UseEdidDpi" X config
[   286.495] (--) NVIDIA(0):     option
[   286.495] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[   286.495] (II) NVIDIA:     access.
[   286.497] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   286.497] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[   286.497] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[   286.497] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[   286.497] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[   286.497] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[   286.497] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   286.497] (II) NVIDIA(0):     Config Options in the README.
[   286.510] (II) NVIDIA(0): Setting mode "DFP-2:nvidia-auto-select"
[   286.577] (==) NVIDIA(0): Disabling shared memory pixmaps
[   286.577] (==) NVIDIA(0): Backing store enabled
[   286.577] (==) NVIDIA(0): Silken mouse disabled
[   286.577] (**) NVIDIA(0): DPMS enabled
[   286.577] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[   286.577] (II) Loading sub module "dri2"
[   286.577] (II) LoadModule: "dri2"
[   286.577] (II) Module "dri2" already built-in
[   286.577] (II) NVIDIA(0): [DRI2] Setup complete
[   286.577] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   286.577] (II) Initializing extension Generic Event Extension
[   286.577] (II) Initializing extension SHAPE
[   286.577] (II) Initializing extension MIT-SHM
[   286.577] (II) Initializing extension XInputExtension
[   286.577] (II) Initializing extension XTEST
[   286.577] (II) Initializing extension BIG-REQUESTS
[   286.577] (II) Initializing extension SYNC
[   286.577] (II) Initializing extension XKEYBOARD
[   286.577] (II) Initializing extension XC-MISC
[   286.577] (II) Initializing extension SECURITY
[   286.577] (II) Initializing extension XFIXES
[   286.577] (II) Initializing extension RENDER
[   286.577] (II) Initializing extension RANDR
[   286.577] (II) Initializing extension COMPOSITE
[   286.577] (II) Initializing extension DAMAGE
[   286.577] (II) Initializing extension MIT-SCREEN-SAVER
[   286.577] (II) Initializing extension DOUBLE-BUFFER
[   286.577] (II) Initializing extension RECORD
[   286.577] (II) Initializing extension DPMS
[   286.577] (II) Initializing extension Present
[   286.577] (II) Initializing extension DRI3
[   286.577] (II) Initializing extension X-Resource
[   286.577] (II) Initializing extension XVideo
[   286.577] (II) Initializing extension XVideo-MotionCompensation
[   286.577] (II) Initializing extension GLX
[   286.577] (II) Initializing extension GLX
[   286.577] (II) Indirect GLX disabled.
[   286.577] (II) GLX: Another vendor is already registered for screen 0
[   286.577] (II) Initializing extension XFree86-VidModeExtension
[   286.577] (II) Initializing extension XFree86-DGA
[   286.577] (II) Initializing extension XFree86-DRI
[   286.577] (II) Initializing extension DRI2
[   286.577] (II) Initializing extension NV-GLX
[   286.577] (II) Initializing extension NV-CONTROL
[   286.577] (II) Initializing extension XINERAMA
[   286.598] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   286.598] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   286.598] (II) LoadModule: "libinput"
[   286.598] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   286.599] (II) Module libinput: vendor="X.Org Foundation"
[   286.599] 	compiled for 1.20.3, module version = 0.28.2
[   286.599] 	Module class: X.Org XInput Driver
[   286.599] 	ABI class: X.Org XInput driver, version 24.1
[   286.599] (II) Using input driver 'libinput' for 'Power Button'
[   286.600] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 31 paused 0
[   286.600] (**) Power Button: always reports core events
[   286.600] (**) Option "Device" "/dev/input/event2"
[   286.600] (**) Option "_source" "server/udev"
[   286.601] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   286.601] (II) event2  - Power Button: device is a keyboard
[   286.601] (II) event2  - Power Button: device removed
[   286.601] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   286.601] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   286.601] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   286.601] (II) event2  - Power Button: device is a keyboard
[   286.602] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   286.602] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   286.602] (II) Using input driver 'libinput' for 'Power Button'
[   286.602] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 34 paused 0
[   286.602] (**) Power Button: always reports core events
[   286.602] (**) Option "Device" "/dev/input/event0"
[   286.602] (**) Option "_source" "server/udev"
[   286.603] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   286.603] (II) event0  - Power Button: device is a keyboard
[   286.603] (II) event0  - Power Button: device removed
[   286.603] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[   286.603] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   286.603] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   286.603] (II) event0  - Power Button: device is a keyboard
[   286.603] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[   286.603] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   286.603] (II) Using input driver 'libinput' for 'Sleep Button'
[   286.604] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 35 paused 0
[   286.604] (**) Sleep Button: always reports core events
[   286.604] (**) Option "Device" "/dev/input/event1"
[   286.604] (**) Option "_source" "server/udev"
[   286.604] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[   286.604] (II) event1  - Sleep Button: device is a keyboard
[   286.604] (II) event1  - Sleep Button: device removed
[   286.604] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[   286.604] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   286.605] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[   286.605] (II) event1  - Sleep Button: device is a keyboard
[   286.605] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[   286.605] (II) No input driver specified, ignoring this device.
[   286.605] (II) This device may have been added with another device file.
[   286.605] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event18)
[   286.605] (II) No input driver specified, ignoring this device.
[   286.605] (II) This device may have been added with another device file.
[   286.605] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event19)
[   286.605] (II) No input driver specified, ignoring this device.
[   286.605] (II) This device may have been added with another device file.
[   286.606] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event13)
[   286.606] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[   286.606] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[   286.606] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 36 paused 0
[   286.606] (**) Logitech USB Optical Mouse: always reports core events
[   286.606] (**) Option "Device" "/dev/input/event13"
[   286.606] (**) Option "_source" "server/udev"
[   286.607] (II) event13 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[   286.607] (II) event13 - Logitech USB Optical Mouse: device set to 1000 DPI
[   286.607] (II) event13 - Logitech USB Optical Mouse: device is a pointer
[   286.607] (II) event13 - Logitech USB Optical Mouse: device removed
[   286.607] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-11/2-11:1.0/0003:046D:C05A.0003/input/input16/event13"
[   286.607] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[   286.607] (**) Option "AccelerationScheme" "none"
[   286.607] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[   286.607] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[   286.607] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[   286.608] (II) event13 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[   286.608] (II) event13 - Logitech USB Optical Mouse: device set to 1000 DPI
[   286.608] (II) event13 - Logitech USB Optical Mouse: device is a pointer
[   286.608] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[   286.608] (II) No input driver specified, ignoring this device.
[   286.608] (II) This device may have been added with another device file.
[   286.608] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event4)
[   286.608] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[   286.608] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[   286.609] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 37 paused 0
[   286.609] (**) Logitech USB Keyboard: always reports core events
[   286.609] (**) Option "Device" "/dev/input/event4"
[   286.609] (**) Option "_source" "server/udev"
[   286.610] (II) event4  - Logitech USB Keyboard: is tagged by udev as: Keyboard
[   286.610] (II) event4  - Logitech USB Keyboard: device is a keyboard
[   286.610] (II) event4  - Logitech USB Keyboard: device removed
[   286.610] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:046D:C326.0001/input/input4/event4"
[   286.610] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[   286.610] (II) event4  - Logitech USB Keyboard: is tagged by udev as: Keyboard
[   286.610] (II) event4  - Logitech USB Keyboard: device is a keyboard
[   286.611] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event5)
[   286.611] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[   286.611] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'
[   286.611] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 38 paused 0
[   286.611] (**) Logitech USB Keyboard Consumer Control: always reports core events
[   286.611] (**) Option "Device" "/dev/input/event5"
[   286.611] (**) Option "_source" "server/udev"
[   286.612] (II) event5  - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[   286.612] (II) event5  - Logitech USB Keyboard Consumer Control: device is a keyboard
[   286.612] (II) event5  - Logitech USB Keyboard Consumer Control: device removed
[   286.612] (II) libinput: Logitech USB Keyboard Consumer Control: needs a virtual subdevice
[   286.612] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.1/0003:046D:C326.0002/input/input6/event5"
[   286.612] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: MOUSE, id 11)
[   286.612] (**) Option "AccelerationScheme" "none"
[   286.612] (**) Logitech USB Keyboard Consumer Control: (accel) selected scheme none/0
[   286.612] (**) Logitech USB Keyboard Consumer Control: (accel) acceleration factor: 2.000
[   286.612] (**) Logitech USB Keyboard Consumer Control: (accel) acceleration threshold: 4
[   286.613] (II) event5  - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[   286.613] (II) event5  - Logitech USB Keyboard Consumer Control: device is a keyboard
[   286.613] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event7)
[   286.613] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[   286.613] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control'
[   286.613] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 39 paused 0
[   286.613] (**) Logitech USB Keyboard System Control: always reports core events
[   286.613] (**) Option "Device" "/dev/input/event7"
[   286.613] (**) Option "_source" "server/udev"
[   286.614] (II) event7  - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[   286.614] (II) event7  - Logitech USB Keyboard System Control: device is a keyboard
[   286.614] (II) event7  - Logitech USB Keyboard System Control: device removed
[   286.614] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.1/0003:046D:C326.0002/input/input7/event7"
[   286.614] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 12)
[   286.615] (II) event7  - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[   286.615] (II) event7  - Logitech USB Keyboard System Control: device is a keyboard
[   286.615] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[   286.615] (II) No input driver specified, ignoring this device.
[   286.615] (II) This device may have been added with another device file.
[   286.615] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[   286.615] (II) No input driver specified, ignoring this device.
[   286.615] (II) This device may have been added with another device file.
[   286.615] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event12)
[   286.615] (II) No input driver specified, ignoring this device.
[   286.615] (II) This device may have been added with another device file.
[   286.616] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event14)
[   286.616] (II) No input driver specified, ignoring this device.
[   286.616] (II) This device may have been added with another device file.
[   286.616] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event15)
[   286.616] (II) No input driver specified, ignoring this device.
[   286.616] (II) This device may have been added with another device file.
[   286.616] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event16)
[   286.616] (II) No input driver specified, ignoring this device.
[   286.616] (II) This device may have been added with another device file.
[   286.616] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[   286.616] (II) No input driver specified, ignoring this device.
[   286.616] (II) This device may have been added with another device file.
[   286.616] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[   286.616] (II) No input driver specified, ignoring this device.
[   286.616] (II) This device may have been added with another device file.
[   286.616] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[   286.616] (II) No input driver specified, ignoring this device.
[   286.616] (II) This device may have been added with another device file.
[   286.617] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[   286.617] (II) No input driver specified, ignoring this device.
[   286.617] (II) This device may have been added with another device file.
[   286.619] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[   286.619] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'
[   286.619] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[   286.619] (**) Logitech USB Keyboard Consumer Control: always reports core events
[   286.619] (**) Option "Device" "/dev/input/event5"
[   286.619] (**) Option "_source" "_driver/libinput"
[   286.619] (II) libinput: Logitech USB Keyboard Consumer Control: is a virtual subdevice
[   286.619] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.1/0003:046D:C326.0002/input/input6/event5"
[   286.619] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 13)
[   286.619] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): connected
[   286.619] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): Internal DisplayPort
[   286.619] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): 1440.0 MHz maximum pixel clock
[   286.619] (--) NVIDIA(GPU-0): 
[   286.773] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0{ForceFullCompositionPipeline=On}"
[   286.958] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   286.958] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   286.958] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   286.958] (--) NVIDIA(GPU-0): 
[   286.958] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   286.958] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   286.958] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   286.958] (--) NVIDIA(GPU-0): 
[   286.959] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): connected
[   286.959] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): Internal DisplayPort
[   286.959] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): 1440.0 MHz maximum pixel clock
[   286.959] (--) NVIDIA(GPU-0): 
[   286.960] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   286.960] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   286.960] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   286.960] (--) NVIDIA(GPU-0): 
[   286.968] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   286.968] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   286.968] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   286.968] (--) NVIDIA(GPU-0): 
[   286.968] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   286.968] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   286.968] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   286.968] (--) NVIDIA(GPU-0): 
[   286.969] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): connected
[   286.969] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): Internal DisplayPort
[   286.969] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): 1440.0 MHz maximum pixel clock
[   286.969] (--) NVIDIA(GPU-0): 
[   286.970] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   286.970] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   286.970] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   286.970] (--) NVIDIA(GPU-0): 
[   286.970] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   286.970] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   286.970] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   286.970] (--) NVIDIA(GPU-0): 
[   286.970] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   286.970] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   286.970] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   286.970] (--) NVIDIA(GPU-0): 
[   286.970] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): connected
[   286.970] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): Internal DisplayPort
[   286.970] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): 1440.0 MHz maximum pixel clock
[   286.970] (--) NVIDIA(GPU-0): 
[   286.971] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   286.971] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   286.971] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   286.971] (--) NVIDIA(GPU-0): 
[   286.990] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   286.990] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   286.990] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   286.990] (--) NVIDIA(GPU-0): 
[   286.990] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   286.990] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   286.990] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   286.990] (--) NVIDIA(GPU-0): 
[   286.990] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): connected
[   286.990] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): Internal DisplayPort
[   286.990] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): 1440.0 MHz maximum pixel clock
[   286.990] (--) NVIDIA(GPU-0): 
[   286.991] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   286.991] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   286.992] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   286.992] (--) NVIDIA(GPU-0): 
[   286.995] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   286.995] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   286.995] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   286.995] (--) NVIDIA(GPU-0): 
[   286.995] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   286.995] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   286.995] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   286.995] (--) NVIDIA(GPU-0): 
[   286.995] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): connected
[   286.995] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): Internal DisplayPort
[   286.995] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): 1440.0 MHz maximum pixel clock
[   286.995] (--) NVIDIA(GPU-0): 
[   286.996] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   286.996] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   286.996] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   286.996] (--) NVIDIA(GPU-0): 
[   286.996] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   286.996] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   286.996] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   286.996] (--) NVIDIA(GPU-0): 
[   286.996] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   286.996] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   286.996] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   286.996] (--) NVIDIA(GPU-0): 
[   286.996] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): connected
[   286.996] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): Internal DisplayPort
[   286.996] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): 1440.0 MHz maximum pixel clock
[   286.996] (--) NVIDIA(GPU-0): 
[   286.997] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   286.997] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   286.997] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   286.997] (--) NVIDIA(GPU-0): 
[   291.114] (**) Option "fd" "31"
[   291.114] (II) event2  - Power Button: device removed
[   291.114] (**) Option "fd" "34"
[   291.114] (II) event0  - Power Button: device removed
[   291.115] (**) Option "fd" "35"
[   291.115] (II) event1  - Sleep Button: device removed
[   291.115] (**) Option "fd" "36"
[   291.115] (II) event13 - Logitech USB Optical Mouse: device removed
[   291.115] (**) Option "fd" "37"
[   291.115] (II) event4  - Logitech USB Keyboard: device removed
[   291.116] (**) Option "fd" "38"
[   291.116] (**) Option "fd" "39"
[   291.116] (II) event7  - Logitech USB Keyboard System Control: device removed
[   291.116] (**) Option "fd" "38"
[   291.116] (II) event5  - Logitech USB Keyboard Consumer Control: device removed
[   291.252] (II) systemd-logind: got pause for 13:64
[   291.253] (II) systemd-logind: got pause for 13:71
[   291.253] (II) systemd-logind: got pause for 13:77
[   291.253] (II) systemd-logind: got pause for 13:68
[   291.253] (II) systemd-logind: got pause for 13:69
[   291.253] (II) systemd-logind: got pause for 13:65
[   291.253] (II) systemd-logind: got pause for 13:66
[   293.101] (II) systemd-logind: got resume for 13:64
[   293.153] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   293.153] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   293.153] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   293.153] (--) NVIDIA(GPU-0): 
[   293.153] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   293.153] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   293.153] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   293.153] (--) NVIDIA(GPU-0): 
[   293.153] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): connected
[   293.153] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): Internal DisplayPort
[   293.153] (--) NVIDIA(GPU-0): BenQ GW2765 (DFP-2): 1440.0 MHz maximum pixel clock
[   293.153] (--) NVIDIA(GPU-0): 
[   293.154] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   293.154] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   293.154] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   293.154] (--) NVIDIA(GPU-0): 
[   293.164] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0{ForceFullCompositionPipeline=On}"
[   293.268] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   293.268] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[   293.268] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[   293.268] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[   293.268] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[   293.268] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[   293.268] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   293.268] (II) NVIDIA(0):     Config Options in the README.
[   293.301] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   293.301] (II) event0  - Power Button: device is a keyboard
[   293.301] (II) systemd-logind: got resume for 13:71
[   293.302] (II) event7  - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[   293.302] (II) event7  - Logitech USB Keyboard System Control: device is a keyboard
[   293.302] (II) systemd-logind: got resume for 13:77
[   293.303] (II) event13 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[   293.303] (II) event13 - Logitech USB Optical Mouse: device set to 1000 DPI
[   293.303] (II) event13 - Logitech USB Optical Mouse: device is a pointer
[   293.303] (II) systemd-logind: got resume for 13:68
[   293.304] (II) event4  - Logitech USB Keyboard: is tagged by udev as: Keyboard
[   293.304] (II) event4  - Logitech USB Keyboard: device is a keyboard
[   293.304] (II) systemd-logind: got resume for 13:69
[   293.304] (II) event5  - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[   293.304] (II) event5  - Logitech USB Keyboard Consumer Control: device is a keyboard
[   293.304] (II) systemd-logind: got resume for 13:65
[   293.305] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[   293.305] (II) event1  - Sleep Button: device is a keyboard
[   293.305] (II) systemd-logind: got resume for 13:66
[   293.305] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   293.305] (II) event2  - Power Button: device is a keyboard

Offline

#12 2019-08-04 19:17:16

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,457

Re: Screen tearing and the fix at Arch Wiki

There's still the nvidia generated /etc/X11/xorg.conf … The server comes up fine though, detects your output and sets the proper resolution.
Remove /etc/X11/xorg.conf and comment the nvidia-settings call in your xinitrc: does the session now start as expected?
Also: elaborate on "black screen": do you see a blinking cursor or a mouse cursor (maybe move the mouse) or is the screen entirely black? Does this also happen when eg. starting openbox instead of xfce?

Your xinitrc still seems broken, btw.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#13 2019-08-05 06:00:55

grinner
Member
Registered: 2019-06-28
Posts: 28

Re: Screen tearing and the fix at Arch Wiki

ProtonArch wrote:

Is there another solution to this, other than enable the fullcompositionpipeline?

You could try installing and using compton as your compositor (I believe compiz would also work but it is much heavier and I have not tried) - make sure to turn off 'Enable diplay composition' in Window managers tweaks.

Works for me except very occasionally when streaming video such as youtube - but even this is fine most of the time.

Offline

#14 2019-08-15 19:41:44

Janusz11
Member
Registered: 2007-05-16
Posts: 88

Re: Screen tearing and the fix at Arch Wiki

I have the same problem: after the last update Xfce won't start properly anymore with "metamodes" "nvidia-auto-select +0+0 {ForceFullCompositionPipeline=On}" enabled in 20-nvidia.conf. I only get a black screen and mouse cursor.

To get the full desktop back I can either switch to another tty and then back into Xfce or start the terminal via keyboard shortcut and call nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }" from history.

I fixed the problem by disabling ForceFullCompositionPipeline in 20-nvidia.conf and adding nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }" to Xfce Application Autostart.

Offline

Pages: 1

Board footer

Powered by FluxBB