You are not logged in.
Pages: 1
This started when I reinstalled on a new bigger drive.
On the old drive I had just setup lm_sensors normally and everything worked, now there are some strange outputs that I am not certain how to deal with.
The problem:
-the sensors command output gives strange output, probably symptom, not the real problem
-pwmconfig cannot setup, so no fancontrol file
-fan does not slow down no matter what I do. (will elaborate)
-fan at maxium speed always
sensors command:
...
asus-isa-0000
Adapter: ISA adapter
cpu_fan: -1 RPM << this is either 25500 or -1, odd since it was around 2500 at maximum previously
temp1: +32.0°C
...
self-solve attempt/analyzing problem:
-Going into root and messing with hwmon/hwmon2/pwm1 and changing any settings i.e. making pwm1_enable 2, 1, 0 e.t.c or changing the input power in pwm1 does nothing, no matter the combination, even if I watch -n1 echo "command" in the new setting.
-however in bios the fan acts as normal (if I stress test and boot into bios when still warm they will be on full, but slow down after cooling)
-hwmon2/fan_input is always either 25500 (or after I attempt to change a setting in the folder, -1)
I apologize for my strange grammar and sporadic way of typing, but all help is appreciated.
Not super urgent but I would like some peace from the fan wur.
Offline
Pages: 1