You are not logged in.

#1 2019-08-30 10:48:33

anubium
Member
Registered: 2019-05-31
Posts: 9

Intel 8260 Bluetooth: hci0: Failed to send firmware data (-38)

Hello Archers, I have an issue with my bluetooth card in my laptop, an Intel 8260 WiFi/Bluetooth card.

Problematic behaviour:

  • On boot there is no default controller available. It does appear if I remove and re-insert the btusb module (rmmod btusb, modprobe btusb)

  • I can pair with devices (tried phone and headphones), but not connect to them.

Points of note:

  • Running Arch Linux 5.2.11-arch1-1-ARCH with i3wm, but this issue is also present when I use MATE DE.

  • Before completely uninstalling TLP, I wasn't even able to pair with any devices (different issue, I guess).

  • While looking through the Bluetooth and Bluetooth headset Arch Wiki articles I noticed that there doesn't seem to be a pulse user on my system (for pulseaudio).

Useful information:

➜  ~ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h (Models 30h-3fh) Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Mullins [Radeon R4/R5 Graphics] (rev 45)
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h (Models 30h-3fh) Host Bridge
00:02.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
00:02.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
00:02.5 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
00:08.0 Encryption controller: Advanced Micro Devices, Inc. [AMD] Kabini/Mullins PSP-Platform Security Processor
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 11)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 39)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 39)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 39)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 02)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller (rev 01)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h (Models 30h-3fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h (Models 30h-3fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h (Models 30h-3fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h (Models 30h-3fh) Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h (Models 30h-3fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h (Models 30h-3fh) Processor Function 5
01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / Radeon 520 Mobile] (rev 83)
02:00.0 Network controller: Intel Corporation Wireless 8260 (rev 2a)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller (rev 07)
➜  ~ rfkill list
1: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
2: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no
➜  ~ systemctl status bluetooth
* bluetooth.service - Bluetooth service
   Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled; vendor preset: disabled)
   Active: active (running) since Fri 2019-08-30 10:04:30 IST; 46min ago
     Docs: man:bluetoothd(8)
 Main PID: 482 (bluetoothd)
   Status: "Running"
    Tasks: 1 (limit: 4915)
   Memory: 2.6M
   CGroup: /system.slice/bluetooth.service
           `-482 /usr/lib/bluetooth/bluetoothd
➜  ~ lsmod | grep -i blue
bluetooth             675840  26 btrtl,btintel,btbcm,bnep,btusb
ecdh_generic           16384  1 bluetooth
crc16                  16384  1 bluetooth
rfkill                 28672  7 hp_wmi,bluetooth,cfg80211

dmesg, note the Bluetooth: hci0: Failed to send firmware data (-38)

➜  ~ dmesg | grep -i blue
[    8.174821] Bluetooth: Core ver 2.22
[    8.174882] Bluetooth: HCI device and connection manager initialized
[    8.174891] Bluetooth: HCI socket layer initialized
[    8.174900] Bluetooth: L2CAP socket layer initialized
[    8.174910] Bluetooth: SCO socket layer initialized
[    8.368944] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[    8.373958] Bluetooth: hci0: Device revision is 5
[    8.373963] Bluetooth: hci0: Secure boot is enabled
[    8.373965] Bluetooth: hci0: OTP lock is disabled
[    8.373967] Bluetooth: hci0: API lock is disabled
[    8.373968] Bluetooth: hci0: Debug lock is disabled
[    8.373971] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    8.376614] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[    8.391659] Bluetooth: hci0: Failed to send firmware data (-38)
[    9.073483] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    9.073487] Bluetooth: BNEP filters: protocol multicast
[    9.073498] Bluetooth: BNEP socket layer initialized
[  566.698256] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[  566.703203] Bluetooth: hci0: Device revision is 5
[  566.703208] Bluetooth: hci0: Secure boot is enabled
[  566.703210] Bluetooth: hci0: OTP lock is disabled
[  566.703211] Bluetooth: hci0: API lock is disabled
[  566.703213] Bluetooth: hci0: Debug lock is disabled
[  566.703215] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[  566.703723] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[  568.468821] Bluetooth: hci0: Waiting for firmware download to complete
[  568.470066] Bluetooth: hci0: Firmware loaded in 1734958 usecs
[  568.470257] Bluetooth: hci0: Waiting for device to boot
[  568.481895] Bluetooth: hci0: Device booted in 11482 usecs
[  568.484043] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[  568.488071] Bluetooth: hci0: Applying Intel DDC parameters completed

Attempting to connect to Bluetooth headset:
The headphones will pair, bluetoothctl will even say it's connected, but that is not reflected in the headphones, where the light still shows as if looking for a connection and no audio will come out through them.

➜  ~ bluetoothctl
Agent registered
[bluetooth]# power on
[CHG] Controller [MAC_ADDRESS] Class: 0x0000010c
Changing power on succeeded
[CHG] Controller [MAC_ADDRESS] Powered: yes
[bluetooth]# scan on
Discovery started
[CHG] Controller [MAC_ADDRESS] Discovering: yes
[NEW] Device [MAC_ADDRESS] JBL T460BT
[bluetooth]# pair [MAC_ADDRESS] 
Attempting to pair with [MAC_ADDRESS]
Failed to pair: org.bluez.Error.ConnectionAttemptFailed
[bluetooth]# pair [MAC_ADDRESS] 
Attempting to pair with [MAC_ADDRESS]
[CHG] Device [MAC_ADDRESS] Connected: yes
[CHG] Device [MAC_ADDRESS] Connected: no
[CHG] Device [MAC_ADDRESS] Paired: yes
Pairing successful
[bluetooth]# info [MAC_ADDRESS] 
Device [MAC_ADDRESS] (public)
        Name: JBL T460BT
        Alias: JBL T460BT
        Class: 0x00240404
        Icon: audio-card
        Paired: yes
        Trusted: no
        Blocked: no
        Connected: no
        LegacyPairing: no
        RSSI: -96
[bluetooth]# connect [MAC_ADDRESS]                                  
Attempting to connect to [MAC_ADDRESS]
Failed to connect: org.bluez.Error.Failed
[bluetooth]# connect [MAC_ADDRESS] 
Attempting to connect to [MAC_ADDRESS]
[CHG] Device [MAC_ADDRESS] Connected: yes
[JBL T460BT]# connect [MAC_ADDRESS] 
Attempting to connect to [MAC_ADDRESS]
Failed to connect: org.bluez.Error.InProgress
[JBL T460BT]# info [MAC_ADDRESS] 
Device [MAC_ADDRESS] (public)
        Name: JBL T460BT
        Alias: JBL T460BT
        Class: 0x00240404
        Icon: audio-card
        Paired: yes
        Trusted: no
        Blocked: no
        Connected: yes
        LegacyPairing: no
        RSSI: -96
[JBL T460BT]# 

Connecting to phone:
I was actually only able to pair and connect to my phone once, I do not have a log of that instance. When it failed, possibly relevant messages:

Failed to pair: org.bluez.Error.ConnectionAttemptFailed
...
[CHG] Device [MAC_ADDRESS] RSSI is nil

I have already looked through all issues on the forums relating to Intel 8260 Bluetooth issues, but none helped my situation. I hope this can be resolved, it has been a long-standing issue on my Arch system.

Last edited by anubium (2019-08-31 18:17:11)

Offline

#2 2019-09-02 10:28:52

anubium
Member
Registered: 2019-05-31
Posts: 9

Re: Intel 8260 Bluetooth: hci0: Failed to send firmware data (-38)

Update:

This is the dmesg output after removing and inserting the module. Unlike other similar threads I have found online, here it doesn't seem to give further errors, however bluetooth connections still don't work:

[  173.941100] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[  173.946090] Bluetooth: hci0: Device revision is 5
[  173.946094] Bluetooth: hci0: Secure boot is enabled
[  173.946096] Bluetooth: hci0: OTP lock is disabled
[  173.946098] Bluetooth: hci0: API lock is disabled
[  173.946099] Bluetooth: hci0: Debug lock is disabled
[  173.946102] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[  173.946632] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[  175.536205] Bluetooth: hci0: Waiting for firmware download to complete
[  175.536822] Bluetooth: hci0: Firmware loaded in 1559430 usecs
[  175.536904] Bluetooth: hci0: Waiting for device to boot
[  175.547855] Bluetooth: hci0: Device booted in 10715 usecs
[  175.549709] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[  175.553924] Bluetooth: hci0: Applying Intel DDC parameters completed

Furthermore, I have found this thread on the Ubuntu forums, with a very similar issue, in which the fix is to apply this kernel patch. However, should that patch not be in the kernel by now? And would it even change anything, considering the module seems to load with no errors after re-insertion (but still won't work)?

Offline

#3 2019-09-02 10:39:51

loqs
Member
Registered: 2014-03-06
Posts: 15,351

Re: Intel 8260 Bluetooth: hci0: Failed to send firmware data (-38)

What is the full dmesg on boot?
The link you supplied is for the patch is for 4.1.4 stable review and https://git.kernel.org/pub/scm/linux/ke … 4682b0019d shows it is present in 4.1.4

Offline

#4 2019-09-02 10:59:14

anubium
Member
Registered: 2019-05-31
Posts: 9

Re: Intel 8260 Bluetooth: hci0: Failed to send firmware data (-38)

loqs wrote:

What is the full dmesg on boot?
The link you supplied is for the patch is for 4.1.4 stable review and https://git.kernel.org/pub/scm/linux/ke … 4682b0019d shows it is present in 4.1.4

Ok, I have just restarted to provide the full dmesg just after logging in:

[    0.000000] Linux version 5.2.11-arch1-1-ARCH (builduser@heftig-107976) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Thu Aug 29 08:09:36 UTC 2019
[    0.000000] Command line: root=PARTUUID=b236777d-786c-4573-8f8d-dd671e33938c rw initrd=/amd-ucode.img initrd=\initramfs-linux.img
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000083aecfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000083aed000-0x00000000842edfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000842ee000-0x000000008e17efff] usable
[    0.000000] BIOS-e820: [mem 0x000000008e17f000-0x000000008f97efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008f97f000-0x000000008fb7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008fb7f000-0x000000008fbfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008fbff000-0x000000008fbfffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008fc00000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0900000-0x00000000f09fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x81b22018-0x81b30c57] usable ==> usable
[    0.000000] e820: update [mem 0x81b22018-0x81b30c57] usable ==> usable
[    0.000000] e820: update [mem 0x81b19018-0x81b21057] usable ==> usable
[    0.000000] e820: update [mem 0x81b19018-0x81b21057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000085fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000086000-0x00000000000bffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000081b19017] usable
[    0.000000] reserve setup_data: [mem 0x0000000081b19018-0x0000000081b21057] usable
[    0.000000] reserve setup_data: [mem 0x0000000081b21058-0x0000000081b22017] usable
[    0.000000] reserve setup_data: [mem 0x0000000081b22018-0x0000000081b30c57] usable
[    0.000000] reserve setup_data: [mem 0x0000000081b30c58-0x0000000083aecfff] usable
[    0.000000] reserve setup_data: [mem 0x0000000083aed000-0x00000000842edfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000842ee000-0x000000008e17efff] usable
[    0.000000] reserve setup_data: [mem 0x000000008e17f000-0x000000008f97efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000008f97f000-0x000000008fb7efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000008fb7f000-0x000000008fbfefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000008fbff000-0x000000008fbfffff] usable
[    0.000000] reserve setup_data: [mem 0x000000008fc00000-0x00000000cfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f0900000-0x00000000f09fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000022effffff] usable
[    0.000000] efi: EFI v2.31 by INSYDE Corp.
[    0.000000] efi:  ESRT=0x8f09bc18  ACPI=0x8fbfe000  ACPI 2.0=0x8fbfe014  SMBIOS=0x8f97ef98  TPMEventLog=0x81b31018 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: HP HP Notebook/80CC, BIOS F.23 04/13/2017
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2195.787 MHz processor
[    0.000050] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000053] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000063] last_pfn = 0x22f000 max_arch_pfn = 0x400000000
[    0.000071] MTRR default type: uncachable
[    0.000073] MTRR fixed ranges enabled:
[    0.000076]   00000-9FFFF write-back
[    0.000077]   A0000-BFFFF uncachable
[    0.000079]   C0000-FFFFF write-through
[    0.000081] MTRR variable ranges enabled:
[    0.000083]   0 base 0000000000 mask FF80000000 write-back
[    0.000086]   1 base 0080000000 mask FFF0000000 write-back
[    0.000088]   2 base 008FB47000 mask FFFFFFF000 uncachable
[    0.000090]   3 base 00FF800000 mask FFFF800000 write-protect
[    0.000091]   4 disabled
[    0.000092]   5 disabled
[    0.000094]   6 disabled
[    0.000095]   7 disabled
[    0.000096] TOM2: 000000022f000000 aka 8944M
[    0.001260] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001510] last_pfn = 0x8fc00 max_arch_pfn = 0x400000000
[    0.009161] esrt: Reserving ESRT space from 0x000000008f09bc18 to 0x000000008f09bc50.
[    0.009193] check: Scanning 1 areas for low memory corruption
[    0.009203] Using GB pages for direct mapping
[    0.009210] BRK [0x14b001000, 0x14b001fff] PGTABLE
[    0.009216] BRK [0x14b002000, 0x14b002fff] PGTABLE
[    0.009219] BRK [0x14b003000, 0x14b003fff] PGTABLE
[    0.009311] BRK [0x14b004000, 0x14b004fff] PGTABLE
[    0.009315] BRK [0x14b005000, 0x14b005fff] PGTABLE
[    0.009825] BRK [0x14b006000, 0x14b006fff] PGTABLE
[    0.009973] BRK [0x14b007000, 0x14b007fff] PGTABLE
[    0.010167] BRK [0x14b008000, 0x14b008fff] PGTABLE
[    0.010453] BRK [0x14b009000, 0x14b009fff] PGTABLE
[    0.010616] BRK [0x14b00a000, 0x14b00afff] PGTABLE
[    0.010812] Secure boot disabled
[    0.010814] RAMDISK: [mem 0x7f20e000-0x7fffefff]
[    0.010828] ACPI: Early table checksum verification disabled
[    0.010839] ACPI: RSDP 0x000000008FBFE014 000024 (v02 HPQOEM)
[    0.010845] ACPI: XSDT 0x000000008FBC4188 0000DC (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.010858] ACPI: FACP 0x000000008FBFB000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.010870] ACPI: DSDT 0x000000008FBE8000 00E676 (v01 HPQOEM SLIC-MPC F0000000 ACPI 00040000)
[    0.010875] ACPI: FACS 0x000000008FB04000 000040
[    0.010879] ACPI: TCPA 0x000000008FBFD000 000032 (v02 HPQOEM 80CB     00000000 HP   00040000)
[    0.010884] ACPI: UEFI 0x000000008FBFC000 000236 (v01 HPQOEM 80CB     00000001 HP   00040000)
[    0.010889] ACPI: HPET 0x000000008FBFA000 000038 (v01 HPQOEM 80CB     00000001 HP   00040000)
[    0.010893] ACPI: APIC 0x000000008FBF9000 000090 (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.010898] ACPI: MCFG 0x000000008FBF8000 00003C (v01 HPQOEM 80CB     00000001 HP   00040000)
[    0.010903] ACPI: ASF! 0x000000008FBF7000 0000A5 (v32 HPQOEM 80CB     00000001 HP   00040000)
[    0.010908] ACPI: BOOT 0x000000008FBE7000 000028 (v01 HPQOEM 80CB     00000001 HP   00040000)
[    0.010912] ACPI: FPDT 0x000000008FBE5000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.010917] ACPI: MSDM 0x000000008FBE4000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.010922] ACPI: SSDT 0x000000008FBE3000 000CB4 (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010926] ACPI: SSDT 0x000000008FBDE000 0048A6 (v02 HPQOEM 80CB     00000002 ACPI 00040000)
[    0.010931] ACPI: VFCT 0x000000008FBCF000 00EC84 (v01 HPQOEM 80CB     00000001 HP   00040000)
[    0.010935] ACPI: SSDT 0x000000008FBCE000 00041A (v01 HPQOEM 80CB     00001000 ACPI 00040000)
[    0.010940] ACPI: TPM2 0x000000008FBCD000 000044 (v03 HPQOEM 80CB     20505350 HP   00040000)
[    0.010945] ACPI: SSDT 0x000000008FBCC000 000692 (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010949] ACPI: SSDT 0x000000008FBCB000 000418 (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010954] ACPI: SSDT 0x000000008FBC9000 0017D0 (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010959] ACPI: SSDT 0x000000008FBC8000 00082B (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010963] ACPI: SSDT 0x000000008FBC7000 00008C (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010968] ACPI: SSDT 0x000000008FBC5000 001153 (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010972] ACPI: BGRT 0x000000008FBC3000 000038 (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010977] ACPI: SSDT 0x000000008FBC2000 000F8A (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010997] ACPI: Local APIC address 0xfee00000
[    0.011173] No NUMA configuration found
[    0.011175] Faking a node at [mem 0x0000000000000000-0x000000022effffff]
[    0.011182] NODE_DATA(0) allocated [mem 0x22effc000-0x22effffff]
[    0.011233] Zone ranges:
[    0.011235]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.011238]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.011239]   Normal   [mem 0x0000000100000000-0x000000022effffff]
[    0.011241]   Device   empty
[    0.011242] Movable zone start for each node
[    0.011243] Early memory node ranges
[    0.011245]   node   0: [mem 0x0000000000001000-0x000000000006dfff]
[    0.011247]   node   0: [mem 0x0000000000070000-0x0000000000085fff]
[    0.011248]   node   0: [mem 0x0000000000100000-0x0000000083aecfff]
[    0.011249]   node   0: [mem 0x00000000842ee000-0x000000008e17efff]
[    0.011250]   node   0: [mem 0x000000008fbff000-0x000000008fbfffff]
[    0.011252]   node   0: [mem 0x0000000100000000-0x000000022effffff]
[    0.011480] Zeroed struct page in unavailable ranges: 9982 pages
[    0.011483] Initmem setup node 0 [mem 0x0000000000001000-0x000000022effffff]
[    0.011486] On node 0 totalpages: 1820930
[    0.011488]   DMA zone: 64 pages used for memmap
[    0.011489]   DMA zone: 21 pages reserved
[    0.011491]   DMA zone: 3971 pages, LIFO batch:0
[    0.011606]   DMA32 zone: 8998 pages used for memmap
[    0.011608]   DMA32 zone: 575871 pages, LIFO batch:63
[    0.037389]   Normal zone: 19392 pages used for memmap
[    0.037397]   Normal zone: 1241088 pages, LIFO batch:63
[    0.085889] ACPI: PM-Timer IO Port: 0x408
[    0.085898] ACPI: Local APIC address 0xfee00000
[    0.085915] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.085917] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.085918] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.085920] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.085936] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.085943] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
[    0.085947] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.085951] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.085954] ACPI: IRQ0 used by override.
[    0.085956] ACPI: IRQ9 used by override.
[    0.085959] Using ACPI (MADT) for SMP configuration information
[    0.085962] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.085992] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.086037] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.086040] PM: Registered nosave memory: [mem 0x0006e000-0x0006ffff]
[    0.086043] PM: Registered nosave memory: [mem 0x00086000-0x000bffff]
[    0.086044] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.086047] PM: Registered nosave memory: [mem 0x81b19000-0x81b19fff]
[    0.086050] PM: Registered nosave memory: [mem 0x81b21000-0x81b21fff]
[    0.086051] PM: Registered nosave memory: [mem 0x81b22000-0x81b22fff]
[    0.086054] PM: Registered nosave memory: [mem 0x81b30000-0x81b30fff]
[    0.086057] PM: Registered nosave memory: [mem 0x83aed000-0x842edfff]
[    0.086060] PM: Registered nosave memory: [mem 0x8e17f000-0x8f97efff]
[    0.086061] PM: Registered nosave memory: [mem 0x8f97f000-0x8fb7efff]
[    0.086062] PM: Registered nosave memory: [mem 0x8fb7f000-0x8fbfefff]
[    0.086065] PM: Registered nosave memory: [mem 0x8fc00000-0xcfffffff]
[    0.086066] PM: Registered nosave memory: [mem 0xd0000000-0xf08fffff]
[    0.086067] PM: Registered nosave memory: [mem 0xf0900000-0xf09fffff]
[    0.086068] PM: Registered nosave memory: [mem 0xf0a00000-0xf7ffffff]
[    0.086069] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.086071] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.086072] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[    0.086073] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.086074] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.086075] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[    0.086076] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[    0.086077] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[    0.086078] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.086079] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.086080] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.086084] [mem 0xd0000000-0xf08fffff] available for PCI devices
[    0.086086] Booting paravirtualized kernel on bare hardware
[    0.086094] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.255198] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.256624] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[    0.256650] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[    0.256652] pcpu-alloc: [0] 0 1 2 3 
[    0.256698] Built 1 zonelists, mobility grouping on.  Total pages: 1792455
[    0.256700] Policy zone: Normal
[    0.256705] Kernel command line: root=PARTUUID=b236777d-786c-4573-8f8d-dd671e33938c rw initrd=/amd-ucode.img initrd=\initramfs-linux.img
[    0.296154] Calgary: detecting Calgary via BIOS EBDA area
[    0.296161] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.372665] Memory: 7010236K/7283720K available (12291K kernel code, 1319K rwdata, 3904K rodata, 1608K init, 3616K bss, 273484K reserved, 0K cma-reserved)
[    0.373012] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.373048] ftrace: allocating 37395 entries in 147 pages
[    0.399746] rcu: Preemptible hierarchical RCU implementation.
[    0.399752] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.399753] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.399755] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.399757] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.399758] 	Tasks RCU enabled.
[    0.399760] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.399761] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.403412] NR_IRQS: 20736, nr_irqs: 1000, preallocated irqs: 16
[    0.403710] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.403907] random: get_random_bytes called from start_kernel+0x37e/0x559 with crng_init=0
[    0.403967] Console: colour dummy device 80x25
[    0.403980] printk: console [tty0] enabled
[    0.404020] ACPI: Core revision 20190509
[    0.404577] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.404598] hpet clockevent registered
[    0.404610] APIC: Switch to symmetric I/O mode setup
[    0.405267] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.421273] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa6a6f86c7, max_idle_ns: 440795235996 ns
[    0.421283] Calibrating delay loop (skipped), value calculated using timer frequency.. 4393.55 BogoMIPS (lpj=7319290)
[    0.421287] pid_max: default: 32768 minimum: 301
[    0.428082] LSM: Security Framework initializing
[    0.428096] Yama: becoming mindful.
[    0.434196] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.436928] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.437091] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.437175] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.437526] *** VALIDATE proc ***
[    0.437661] *** VALIDATE cgroup1 ***
[    0.437664] *** VALIDATE cgroup2 ***
[    0.437751] BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.
[    0.437780] LVT offset 1 assigned for vector 0xf9
[    0.437790] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.437791] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[    0.437793] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.437797] Spectre V2 : Mitigation: Full AMD retpoline
[    0.437798] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.437801] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.438210] Freeing SMP alternatives memory: 32K
[    0.549921] smpboot: CPU0: AMD A8-7410 APU with AMD Radeon R5 Graphics (family: 0x16, model: 0x30, stepping: 0x1)
[    0.568007] Performance Events: AMD PMU driver.
[    0.568018] ... version:                0
[    0.568019] ... bit width:              48
[    0.568020] ... generic registers:      4
[    0.568021] ... value mask:             0000ffffffffffff
[    0.568022] ... max period:             00007fffffffffff
[    0.568023] ... fixed-purpose events:   0
[    0.568024] ... event mask:             000000000000000f
[    0.574660] rcu: Hierarchical SRCU implementation.
[    0.598035] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.604681] smp: Bringing up secondary CPUs ...
[    0.644701] x86: Booting SMP configuration:
[    0.644704] .... node  #0, CPUs:      #1
[    0.004214] do_IRQ: 1.55 No irq handler for vector
[    0.684679]  #2
[    0.004214] do_IRQ: 2.55 No irq handler for vector
[    0.724710]  #3
[    0.004214] do_IRQ: 3.55 No irq handler for vector
[    0.726850] smp: Brought up 1 node, 4 CPUs
[    0.726850] smpboot: Max logical packages: 1
[    0.726850] smpboot: Total of 4 processors activated (17573.22 BogoMIPS)
[    0.728456] devtmpfs: initialized
[    0.728456] x86/mm: Memory block size: 128MB
[    0.729314] PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes)
[    0.729314] PM: Registering ACPI NVS region [mem 0x8f97f000-0x8fb7efff] (2097152 bytes)
[    0.729314] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.729314] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.729314] pinctrl core: initialized pinctrl subsystem
[    0.729314] PM: RTC time: 10:43:42, date: 2019-09-02
[    0.729314] NET: Registered protocol family 16
[    0.729314] audit: initializing netlink subsys (disabled)
[    0.729314] audit: type=2000 audit(1567421022.323:1): state=initialized audit_enabled=0 res=1
[    0.731304] cpuidle: using governor ladder
[    0.731304] cpuidle: using governor menu
[    0.731327] Simple Boot Flag at 0x44 set to 0x1
[    0.731363] ACPI: bus type PCI registered
[    0.731366] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.731481] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.731492] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.731492] PCI: Using configuration type 1 for base access
[    0.733093] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.733093] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.738128] fbcon: Taking over console
[    0.738163] ACPI: Added _OSI(Module Device)
[    0.738165] ACPI: Added _OSI(Processor Device)
[    0.738167] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.738168] ACPI: Added _OSI(Processor Aggregator Device)
[    0.738170] ACPI: Added _OSI(Linux-Dell-Video)
[    0.738171] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.738173] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.768523] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.775177] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.781465] ACPI: EC: EC started
[    0.781467] ACPI: EC: interrupt blocked
[    0.781977] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
[    0.781981] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.781983] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
[    0.781984] ACPI: Interpreter enabled
[    0.782022] ACPI: (supports S0 S3 S4 S5)
[    0.782024] ACPI: Using IOAPIC for interrupt routing
[    0.782451] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.782920] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.798179] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.798191] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.798199] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.798224] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.798735] PCI host bridge to bus 0000:00
[    0.798739] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.798741] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.798744] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.798746] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.798748] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.798750] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.798752] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.798754] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.798756] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.798758] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.798760] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.798762] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.798764] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.798766] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.798768] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.798770] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window]
[    0.798772] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
[    0.798774] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
[    0.798777] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.798788] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
[    0.798952] pci 0000:00:01.0: [1002:9851] type 00 class 0x030000
[    0.798971] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.798980] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.798986] pci 0000:00:01.0: reg 0x20: [io  0x4000-0x40ff]
[    0.798992] pci 0000:00:01.0: reg 0x24: [mem 0xf0e00000-0xf0e3ffff]
[    0.798998] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.799003] pci 0000:00:01.0: enabling Extended Tags
[    0.799017] pci 0000:00:01.0: BAR 0: assigned to efifb
[    0.799049] pci 0000:00:01.0: supports D1 D2
[    0.799052] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    0.799201] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[    0.799217] pci 0000:00:01.1: reg 0x10: [mem 0xf0e60000-0xf0e63fff 64bit]
[    0.799241] pci 0000:00:01.1: enabling Extended Tags
[    0.799276] pci 0000:00:01.1: supports D1 D2
[    0.799394] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
[    0.799535] pci 0000:00:02.1: [1022:1439] type 01 class 0x060400
[    0.799570] pci 0000:00:02.1: enabling Extended Tags
[    0.799612] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[    0.799751] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
[    0.799786] pci 0000:00:02.4: enabling Extended Tags
[    0.799828] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[    0.799967] pci 0000:00:02.5: [1022:1439] type 01 class 0x060400
[    0.800003] pci 0000:00:02.5: enabling Extended Tags
[    0.800044] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
[    0.800188] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
[    0.800201] pci 0000:00:08.0: reg 0x10: [mem 0xf0e40000-0xf0e5ffff 64bit pref]
[    0.800207] pci 0000:00:08.0: reg 0x18: [mem 0xf0a00000-0xf0afffff]
[    0.800212] pci 0000:00:08.0: reg 0x1c: [mem 0xf0e70000-0xf0e70fff]
[    0.800221] pci 0000:00:08.0: reg 0x24: [mem 0xf0e6a000-0xf0e6bfff]
[    0.800375] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[    0.800400] pci 0000:00:10.0: reg 0x10: [mem 0xf0e68000-0xf0e69fff 64bit]
[    0.800494] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.800640] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
[    0.800658] pci 0000:00:11.0: reg 0x10: [io  0x4118-0x411f]
[    0.800666] pci 0000:00:11.0: reg 0x14: [io  0x4124-0x4127]
[    0.800674] pci 0000:00:11.0: reg 0x18: [io  0x4110-0x4117]
[    0.800681] pci 0000:00:11.0: reg 0x1c: [io  0x4120-0x4123]
[    0.800689] pci 0000:00:11.0: reg 0x20: [io  0x4100-0x410f]
[    0.800697] pci 0000:00:11.0: reg 0x24: [mem 0xf0e6f000-0xf0e6f3ff]
[    0.800739] pci 0000:00:11.0: PME# supported from D3hot
[    0.800988] pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
[    0.801006] pci 0000:00:12.0: reg 0x10: [mem 0xf0e6e000-0xf0e6e0ff]
[    0.801070] pci 0000:00:12.0: supports D1 D2
[    0.801072] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.801199] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
[    0.801217] pci 0000:00:13.0: reg 0x10: [mem 0xf0e6d000-0xf0e6d0ff]
[    0.801301] pci 0000:00:13.0: supports D1 D2
[    0.801303] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.801431] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.801602] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.801623] pci 0000:00:14.2: reg 0x10: [mem 0xf0e64000-0xf0e67fff 64bit]
[    0.801683] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.801809] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.801985] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
[    0.802005] pci 0000:00:14.7: reg 0x10: [mem 0xf0e6c000-0xf0e6c0ff 64bit]
[    0.802059] pci 0000:00:14.7: PME# supported from D3cold
[    0.802180] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
[    0.802303] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
[    0.802424] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
[    0.802548] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
[    0.802675] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
[    0.802795] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
[    0.803033] pci 0000:01:00.0: [1002:6660] type 00 class 0x038000
[    0.803064] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.803079] pci 0000:01:00.0: reg 0x18: [mem 0xf0d00000-0xf0d3ffff 64bit]
[    0.803089] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.803106] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.803116] pci 0000:01:00.0: enabling Extended Tags
[    0.803185] pci 0000:01:00.0: supports D1 D2
[    0.803187] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.803224] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:00:02.1 (capable of 63.008 Gb/s with 8 GT/s x8 link)
[    0.803332] pci 0000:00:02.1: PCI bridge to [bus 01]
[    0.803337] pci 0000:00:02.1:   bridge window [io  0x3000-0x3fff]
[    0.803340] pci 0000:00:02.1:   bridge window [mem 0xf0d00000-0xf0dfffff]
[    0.803345] pci 0000:00:02.1:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.803434] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
[    0.803486] pci 0000:02:00.0: reg 0x10: [mem 0xf0c00000-0xf0c01fff 64bit]
[    0.803675] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.803854] pci 0000:00:02.4: PCI bridge to [bus 02]
[    0.803861] pci 0000:00:02.4:   bridge window [mem 0xf0c00000-0xf0cfffff]
[    0.803963] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.803999] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.804027] pci 0000:03:00.0: reg 0x18: [mem 0xf0b00000-0xf0b00fff 64bit]
[    0.804047] pci 0000:03:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
[    0.804160] pci 0000:03:00.0: supports D1 D2
[    0.804162] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.804331] pci 0000:00:02.5: PCI bridge to [bus 03]
[    0.804336] pci 0000:00:02.5:   bridge window [io  0x2000-0x2fff]
[    0.804339] pci 0000:00:02.5:   bridge window [mem 0xf0b00000-0xf0bfffff]
[    0.804344] pci 0000:00:02.5:   bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[    0.886592] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.886742] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.886916] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.887089] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.887233] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.887345] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.887457] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.887569] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.887856] platform MSFT0101:00: failed to claim resource 0: [mem 0x8fb6e000-0x8fc6dfff]
[    0.887870] acpi MSFT0101:00: platform device creation failed: -16
[    0.888276] ACPI: EC: interrupt unblocked
[    0.888286] ACPI: EC: event unblocked
[    0.888294] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.888297] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions and events
[    0.888445] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.888445] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.888445] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.888445] vgaarb: loaded
[    0.888445] ACPI: bus type USB registered
[    0.888445] usbcore: registered new interface driver usbfs
[    0.888445] usbcore: registered new interface driver hub
[    0.888445] usbcore: registered new device driver usb
[    0.888445] pps_core: LinuxPPS API ver. 1 registered
[    0.888445] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.888445] PTP clock support registered
[    0.888445] EDAC MC: Ver: 3.0.0
[    0.891339] Registered efivars operations
[    0.911482] PCI: Using ACPI for IRQ routing
[    0.912111] PCI: pci_cache_line_size set to 64 bytes
[    0.912127] e820: reserve RAM buffer [mem 0x0006e000-0x0006ffff]
[    0.912130] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[    0.912131] e820: reserve RAM buffer [mem 0x81b19018-0x83ffffff]
[    0.912133] e820: reserve RAM buffer [mem 0x81b22018-0x83ffffff]
[    0.912134] e820: reserve RAM buffer [mem 0x83aed000-0x83ffffff]
[    0.912135] e820: reserve RAM buffer [mem 0x8e17f000-0x8fffffff]
[    0.912137] e820: reserve RAM buffer [mem 0x8fc00000-0x8fffffff]
[    0.912138] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
[    0.914615] NetLabel: Initializing
[    0.914615] NetLabel:  domain hash size = 128
[    0.914615] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.914615] NetLabel:  unlabeled traffic allowed by default
[    0.914680] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.914686] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.917945] clocksource: Switched to clocksource tsc-early
[    0.940241] VFS: Disk quotas dquot_6.6.0
[    0.940269] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.940323] *** VALIDATE hugetlbfs ***
[    0.940415] pnp: PnP ACPI init
[    0.940808] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[    0.940811] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.940820] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.941247] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.941378] pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.941494] pnp 00:03: Plug and Play ACPI device, IDs SYN1efc PNP0f13 (active)
[    0.941575] system 00:04: [io  0x0400-0x04cf] has been reserved
[    0.941577] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.941580] system 00:04: [io  0x04d6] has been reserved
[    0.941582] system 00:04: [io  0x0680-0x06ff] has been reserved
[    0.941585] system 00:04: [io  0x077a] has been reserved
[    0.941587] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.941589] system 00:04: [io  0x0c14] has been reserved
[    0.941591] system 00:04: [io  0x0c50-0x0c52] has been reserved
[    0.941593] system 00:04: [io  0x0c6c] has been reserved
[    0.941596] system 00:04: [io  0x0c6f] has been reserved
[    0.941598] system 00:04: [io  0x0cd0-0x0cdb] has been reserved
[    0.941600] system 00:04: [io  0x0840-0x0847] has been reserved
[    0.941607] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.941755] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.941758] system 00:05: [mem 0xff800000-0xffffffff] has been reserved
[    0.941764] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.025773] pnp: PnP ACPI: found 6 devices
[    1.033345] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.033359] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: address conflict with Reserved [mem 0xff800000-0xffffffff]
[    1.033364] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    1.033394] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0e80000-0xf0e9ffff pref]
[    1.033399] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0d40000-0xf0d5ffff pref]
[    1.033403] pci 0000:00:02.1: PCI bridge to [bus 01]
[    1.033407] pci 0000:00:02.1:   bridge window [io  0x3000-0x3fff]
[    1.033412] pci 0000:00:02.1:   bridge window [mem 0xf0d00000-0xf0dfffff]
[    1.033415] pci 0000:00:02.1:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.033420] pci 0000:00:02.4: PCI bridge to [bus 02]
[    1.033425] pci 0000:00:02.4:   bridge window [mem 0xf0c00000-0xf0cfffff]
[    1.033432] pci 0000:00:02.5: PCI bridge to [bus 03]
[    1.033434] pci 0000:00:02.5:   bridge window [io  0x2000-0x2fff]
[    1.033438] pci 0000:00:02.5:   bridge window [mem 0xf0b00000-0xf0bfffff]
[    1.033442] pci 0000:00:02.5:   bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[    1.033449] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.033452] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.033454] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.033456] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    1.033458] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    1.033460] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    1.033462] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    1.033464] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    1.033466] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    1.033468] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    1.033471] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    1.033473] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    1.033475] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    1.033477] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    1.033479] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    1.033481] pci_bus 0000:00: resource 19 [mem 0xd0000000-0xf7ffffff window]
[    1.033483] pci_bus 0000:00: resource 20 [mem 0xfc000000-0xfed3ffff window]
[    1.033486] pci_bus 0000:00: resource 21 [mem 0xfed45000-0xffffffff window]
[    1.033488] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.033490] pci_bus 0000:01: resource 1 [mem 0xf0d00000-0xf0dfffff]
[    1.033492] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.033495] pci_bus 0000:02: resource 1 [mem 0xf0c00000-0xf0cfffff]
[    1.033497] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    1.033499] pci_bus 0000:03: resource 1 [mem 0xf0b00000-0xf0bfffff]
[    1.033501] pci_bus 0000:03: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
[    1.033725] NET: Registered protocol family 2
[    1.033963] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    1.034012] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.034201] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.034462] TCP: Hash tables configured (established 65536 bind 65536)
[    1.034549] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.034608] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.034819] NET: Registered protocol family 1
[    1.034829] NET: Registered protocol family 44
[    1.034852] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.046992] pci 0000:00:10.0: quirk_usb_early_handoff+0x0/0x63a took 11790 usecs
[    1.047215] pci 0000:00:12.0: PME# does not work under D3, disabling it
[    1.047444] pci 0000:00:13.0: PME# does not work under D3, disabling it
[    1.047491] PCI: CLS 64 bytes, default 64
[    1.047577] Trying to unpack rootfs image as initramfs...
[    1.122228] Freeing initrd memory: 14276K
[    1.122236] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.122239] software IO TLB: mapped [mem 0x85d19000-0x89d19000] (64MB)
[    1.122304] amd_uncore: AMD NB counters detected
[    1.122309] amd_uncore: AMD LLC counters detected
[    1.122524] LVT offset 0 assigned for vector 0x400
[    1.122581] perf: AMD IBS detected (0x000000ff)
[    1.122691] check: Scanning for low memory corruption every 60 seconds
[    1.123749] Initialise system trusted keyrings
[    1.123767] Key type blacklist registered
[    1.123880] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    1.126422] zbud: loaded
[    1.129491] Key type asymmetric registered
[    1.129494] Asymmetric key parser 'x509' registered
[    1.129520] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.129647] io scheduler mq-deadline registered
[    1.129650] io scheduler kyber registered
[    1.129748] io scheduler bfq registered
[    1.130827] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.130974] efifb: probing for efifb
[    1.131027] efifb: framebuffer at 0xe0000000, using 4224k, total 4224k
[    1.131029] efifb: mode is 1366x768x32, linelength=5632, pages=1
[    1.131029] efifb: scrolling: redraw
[    1.131032] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.131202] Console: switching to colour frame buffer device 170x48
[    1.135470] fb0: EFI VGA frame buffer device
[    1.135548] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.135565] ACPI: Power Button [PWRB]
[    1.135661] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.135671] ACPI: Lid Switch [LID]
[    1.135729] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.136953] ACPI: Power Button [PWRF]
[    1.137087] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.139682] acpi device:00: registered as cooling_device0
[    1.139761] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.139836] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[    1.142153] acpi device:0a: registered as cooling_device1
[    1.142223] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input4
[    1.143389] thermal LNXTHERM:00: registered as thermal_zone0
[    1.143391] ACPI: Thermal Zone [TSZ0] (52 C)
[    1.143668] thermal LNXTHERM:01: registered as thermal_zone1
[    1.143670] ACPI: Thermal Zone [TSZ2] (20 C)
[    1.143969] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.144710] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.144711] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    1.145525] usbcore: registered new interface driver usbserial_generic
[    1.145534] usbserial: USB Serial support registered for generic
[    1.145559] rtc_cmos 00:01: RTC can wake from S4
[    1.145699] rtc_cmos 00:01: registered as rtc0
[    1.145731] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[    1.145909] ledtrig-cpu: registered to indicate activity on CPUs
[    1.146011] x86/pm: family 0x16 cpu detected, MSR saving is needed during suspending.
[    1.146322] NET: Registered protocol family 10
[    1.159086] Segment Routing with IPv6
[    1.159129] NET: Registered protocol family 17
[    1.159560] mce: Using 6 MCE banks
[    1.159586] RAS: Correctable Errors collector initialized.
[    1.159657] microcode: CPU0: patch_level=0x07030105
[    1.159663] microcode: CPU1: patch_level=0x07030105
[    1.159674] microcode: CPU2: patch_level=0x07030105
[    1.159686] microcode: CPU3: patch_level=0x07030105
[    1.159774] microcode: Microcode Update Driver: v2.2.
[    1.159792] sched_clock: Marking stable (1158883424, 880920)->(1168444232, -8679888)
[    1.160146] registered taskstats version 1
[    1.160160] Loading compiled-in X.509 certificates
[    1.167483] Loaded X.509 cert 'Build time autogenerated kernel key: 12f49d339d879888f73b01bf952385086361e4d8'
[    1.167545] zswap: loaded using pool lzo/zbud
[    1.179632] Key type big_key registered
[    1.180456] PM:   Magic number: 3:910:728
[    1.180622] rtc_cmos 00:01: setting system clock to 2019-09-02T10:43:43 UTC (1567421023)
[    1.183576] Freeing unused decrypted memory: 2040K
[    1.184309] Freeing unused kernel image memory: 1608K
[    1.203747] Write protecting the kernel read-only data: 18432k
[    1.204754] Freeing unused kernel image memory: 2012K
[    1.204938] Freeing unused kernel image memory: 192K
[    1.223725] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.223737] Run /init as init process
[    1.299416] Linux agpgart interface v0.103
[    1.382379] [drm] radeon kernel modesetting enabled.
[    1.382417] vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[    1.383431] ATPX version 1, functions 0x00000003
[    1.383618] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
[    1.383621] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf07fffff
[    1.383623] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 5: 0xf0e00000 -> 0xf0e3ffff
[    1.383626] checking generic (e0000000 420000) vs hw (e0000000 10000000)
[    1.383627] fb0: switching to radeondrmfb from EFI VGA
[    1.383668] Console: switching to colour dummy device 80x25
[    1.383822] radeon 0000:00:01.0: vgaarb: deactivate vga console
[    1.384183] [drm] initializing kernel modesetting (MULLINS 0x1002:0x9851 0x103C:0x80CC 0x45).
[    1.384203] [drm] doorbell mmio base: 0xF0000000
[    1.384204] [drm] doorbell mmio size: 8388608
[    1.384243] ATOM BIOS: AMD
[    1.384366] radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    1.384369] radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[    1.384376] [drm] Detected VRAM RAM=1024M, BAR=256M
[    1.384377] [drm] RAM width 128bits DDR
[    1.384489] [TTM] Zone  kernel: Available graphics memory: 3539516 KiB
[    1.384490] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    1.384492] [TTM] Initializing pool allocator
[    1.384498] [TTM] Initializing DMA pool allocator
[    1.384532] [drm] radeon: 1024M of VRAM memory ready
[    1.384534] [drm] radeon: 2048M of GTT memory ready.
[    1.384548] [drm] Loading mullins Microcode
[    1.384735] [drm] Internal thermal controller without fan control
[    1.386340] [drm] radeon: dpm initialized
[    1.386494] [drm] Found UVD firmware Version: 1.64 Family ID: 9
[    1.388384] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[    1.388400] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    1.434100] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[    1.434293] radeon 0000:00:01.0: WB enabled
[    1.434313] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x(____ptrval____)
[    1.434316] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0x(____ptrval____)
[    1.434319] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0x(____ptrval____)
[    1.434322] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x(____ptrval____)
[    1.434324] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0x(____ptrval____)
[    1.434913] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0x(____ptrval____)
[    1.435121] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0x(____ptrval____)
[    1.435124] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0x(____ptrval____)
[    1.435128] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.435128] [drm] Driver supports precise vblank timestamp query.
[    1.435196] radeon 0000:00:01.0: radeon: using MSI.
[    1.435230] [drm] radeon: irq initialized.
[    1.437866] [drm] ring test on 0 succeeded in 4 usecs
[    1.437938] [drm] ring test on 1 succeeded in 2 usecs
[    1.437953] [drm] ring test on 2 succeeded in 2 usecs
[    1.438139] [drm] ring test on 3 succeeded in 3 usecs
[    1.438146] [drm] ring test on 4 succeeded in 3 usecs
[    1.464199] [drm] ring test on 5 succeeded in 2 usecs
[    1.464213] [drm] UVD initialized successfully.
[    1.574280] [drm] ring test on 6 succeeded in 12 usecs
[    1.574287] [drm] ring test on 7 succeeded in 2 usecs
[    1.574288] [drm] VCE initialized successfully.
[    1.575371] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.575512] [drm] ib test on ring 1 succeeded in 0 usecs
[    1.575647] [drm] ib test on ring 2 succeeded in 0 usecs
[    1.575786] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.575922] [drm] ib test on ring 4 succeeded in 0 usecs
[    2.084930] [drm] ib test on ring 5 succeeded
[    2.085551] [drm] ib test on ring 6 succeeded
[    2.086002] [drm] ib test on ring 7 succeeded
[    2.087814] [drm] radeon atom DIG backlight initialized
[    2.088000] [drm] Radeon Display Connectors
[    2.088002] [drm] Connector 0:
[    2.088003] [drm]   eDP-1
[    2.088004] [drm]   HPD1
[    2.088006] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    2.088007] [drm]   Encoders:
[    2.088021] [drm]     LCD1: INTERNAL_UNIPHY
[    2.088022] [drm] Connector 1:
[    2.088023] [drm]   HDMI-A-1
[    2.088024] [drm]   HPD2
[    2.088027] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[    2.088027] [drm]   Encoders:
[    2.088028] [drm]     DFP1: INTERNAL_UNIPHY
[    2.088029] [drm] Connector 2:
[    2.088030] [drm]   VGA-1
[    2.088032] [drm]   DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[    2.088033] [drm]   Encoders:
[    2.088034] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.137987] tsc: Refined TSC clocksource calibration: 2195.880 MHz
[    2.138005] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa6ff058a4, max_idle_ns: 440795278046 ns
[    2.138043] clocksource: Switched to clocksource tsc
[    2.442968] [drm] fb mappable at 0xE0722000
[    2.442971] [drm] vram apper at 0xE0000000
[    2.442972] [drm] size 4325376
[    2.442974] [drm] fb depth is 24
[    2.442975] [drm]    pitch is 5632
[    2.443172] fbcon: radeondrmfb (fb0) is primary device
[    2.946944] Console: switching to colour frame buffer device 170x48
[    2.951203] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    2.986856] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[    2.986995] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xd0000000 -> 0xdfffffff
[    2.986998] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0d00000 -> 0xf0d3ffff
[    2.987030] radeon 0000:01:00.0: enabling device (0002 -> 0003)
[    2.987364] [drm] initializing kernel modesetting (HAINAN 0x1002:0x6660 0x103C:0x80CC 0x83).
[    2.987394] vga_switcheroo: enabled
[    3.085647] ATOM BIOS: HP/Compal
[    3.085666] [drm] GPU not posted. posting now...
[    3.098587] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[    3.098590] radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[    3.098598] [drm] Detected VRAM RAM=2048M, BAR=256M
[    3.098599] [drm] RAM width 64bits DDR
[    3.098619] [drm] radeon: 2048M of VRAM memory ready
[    3.098620] [drm] radeon: 2048M of GTT memory ready.
[    3.098641] [drm] Loading hainan Microcode
[    3.098849] [drm] Internal thermal controller without fan control
[    3.108036] [drm] radeon: dpm initialized
[    3.108047] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    3.110883] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    3.555044] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[    3.555214] radeon 0000:01:00.0: WB enabled
[    3.555220] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x(____ptrval____)
[    3.555223] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x(____ptrval____)
[    3.555225] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x(____ptrval____)
[    3.555228] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x(____ptrval____)
[    3.555230] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x(____ptrval____)
[    3.555233] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.555234] [drm] Driver supports precise vblank timestamp query.
[    3.555236] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    3.555320] radeon 0000:01:00.0: radeon: using MSI.
[    3.555359] [drm] radeon: irq initialized.
[    3.970226] [drm] ring test on 0 succeeded in 1 usecs
[    3.970234] [drm] ring test on 1 succeeded in 1 usecs
[    3.970241] [drm] ring test on 2 succeeded in 1 usecs
[    3.970253] [drm] ring test on 3 succeeded in 4 usecs
[    3.970261] [drm] ring test on 4 succeeded in 4 usecs
[    3.970482] [drm] ib test on ring 0 succeeded in 0 usecs
[    3.970524] [drm] ib test on ring 1 succeeded in 0 usecs
[    3.970561] [drm] ib test on ring 2 succeeded in 0 usecs
[    3.970581] [drm] ib test on ring 3 succeeded in 0 usecs
[    3.970597] [drm] ib test on ring 4 succeeded in 0 usecs
[    3.971051] [drm] Radeon Display Connectors
[    3.973065] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
[    4.101531] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.122629] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.122741] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.132113] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.132244] SCSI subsystem initialized
[    4.134130] ehci-pci: EHCI PCI platform driver
[    4.134449] ehci-pci 0000:00:12.0: EHCI Host Controller
[    4.134470] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[    4.134481] ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    4.134490] ehci-pci 0000:00:12.0: debug port 2
[    4.134552] ehci-pci 0000:00:12.0: irq 18, io mem 0xf0e6e000
[    4.139643] sdhci: Secure Digital Host Controller Interface driver
[    4.139646] sdhci: Copyright(c) Pierre Ossman
[    4.144765] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[    4.144883] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    4.144886] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.144889] usb usb1: Product: EHCI Host Controller
[    4.144892] usb usb1: Manufacturer: Linux 5.2.11-arch1-1-ARCH ehci_hcd
[    4.144895] usb usb1: SerialNumber: 0000:00:12.0
[    4.145160] hub 1-0:1.0: USB hub found
[    4.145176] hub 1-0:1.0: 2 ports detected
[    4.145712] ehci-pci 0000:00:13.0: EHCI Host Controller
[    4.145723] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[    4.145730] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    4.145739] ehci-pci 0000:00:13.0: debug port 2
[    4.145788] ehci-pci 0000:00:13.0: irq 18, io mem 0xf0e6d000
[    4.153128] libata version 3.00 loaded.
[    4.153267] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[    4.158121] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
[    4.158254] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    4.158258] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.158261] usb usb2: Product: EHCI Host Controller
[    4.158264] usb usb2: Manufacturer: Linux 5.2.11-arch1-1-ARCH ehci_hcd
[    4.158267] usb usb2: SerialNumber: 0000:00:13.0
[    4.158891] hub 2-0:1.0: USB hub found
[    4.158911] hub 2-0:1.0: 2 ports detected
[    4.159056] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[    4.159239] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    4.159255] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[    4.159440] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[    4.159917] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    4.159921] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.159924] usb usb3: Product: xHCI Host Controller
[    4.159928] usb usb3: Manufacturer: Linux 5.2.11-arch1-1-ARCH xhci-hcd
[    4.159930] usb usb3: SerialNumber: 0000:00:10.0
[    4.160198] hub 3-0:1.0: USB hub found
[    4.160219] hub 3-0:1.0: 2 ports detected
[    4.160526] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    4.160537] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[    4.160545] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[    4.162881] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.162960] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
[    4.162963] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.162967] usb usb4: Product: xHCI Host Controller
[    4.162969] usb usb4: Manufacturer: Linux 5.2.11-arch1-1-ARCH xhci-hcd
[    4.162972] usb usb4: SerialNumber: 0000:00:10.0
[    4.163282] hub 4-0:1.0: USB hub found
[    4.163301] hub 4-0:1.0: 2 ports detected
[    4.167316] ahci 0000:00:11.0: version 3.0
[    4.169415] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    4.169421] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part 
[    4.177225] scsi host0: ahci
[    4.177550] scsi host1: ahci
[    4.177682] ata1: SATA max UDMA/133 abar m1024@0xf0e6f000 port 0xf0e6f100 irq 38
[    4.177686] ata2: SATA max UDMA/133 abar m1024@0xf0e6f000 port 0xf0e6f180 irq 38
[    4.181880] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    4.474797] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    4.488074] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[    4.488100] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    4.621771] usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
[    4.621776] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.622184] hub 1-1:1.0: USB hub found
[    4.622262] hub 1-1:1.0: 4 ports detected
[    4.635134] usb 2-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
[    4.635139] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.635556] hub 2-1:1.0: USB hub found
[    4.635620] hub 2-1:1.0: 4 ports detected
[    4.644738] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.644769] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.644962] ata1.00: supports DRM functions and may not be fully accessible
[    4.645543] ata1.00: disabling queued TRIM support
[    4.645546] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT03B6Q, max UDMA/133
[    4.645548] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    4.647182] ata1.00: supports DRM functions and may not be fully accessible
[    4.647723] ata1.00: disabling queued TRIM support
[    4.648082] ata2.00: ATAPI: hp       DVDRW  GUD0N, PD00, max UDMA/133
[    4.649057] ata1.00: configured for UDMA/133
[    4.649375] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  3B6Q PQ: 0 ANSI: 5
[    4.650190] ata2.00: configured for UDMA/133
[    4.654229] scsi 1:0:0:0: CD-ROM            hp       DVDRW  GUD0N     PD00 PQ: 0 ANSI: 5
[    4.663987] usb 3-2: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00
[    4.663992] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.663995] usb 3-2: Product: Dell MS116 USB Optical Mouse
[    4.663998] usb 3-2: Manufacturer: PixArt
[    4.674771] hidraw: raw HID events driver (C) Jiri Kosina
[    4.688398] usbcore: registered new interface driver usbhid
[    4.688401] usbhid: USB HID core driver
[    4.718059] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    4.718090] sd 0:0:0:0: [sda] Write Protect is off
[    4.718093] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.718132] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.723703]  sda: sda1 sda2
[    4.724944] sd 0:0:0:0: [sda] supports TCG Opal
[    4.724947] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.781760] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.781766] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.782213] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.844755] random: fast init done
[    4.914701] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[    4.918009] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[    5.033592] usb 1-1.4: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
[    5.033597] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.037823] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=57d6, bcdDevice= 0.03
[    5.037828] usb 2-1.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    5.037831] usb 2-1.1: Product: HP Truevision HD
[    5.037833] usb 2-1.1: Manufacturer: Generic
[    5.037835] usb 2-1.1: SerialNumber: DEWKP019I9UDUT
[    5.565029] F2FS-fs (sda2): Mounted with checkpoint version = 107eb4e3
[    5.732729] systemd[1]: systemd 242.84-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    5.748351] systemd[1]: Detected architecture x86-64.
[    5.752921] systemd[1]: Set hostname to <Lenovo>.
[    5.939387] random: systemd: uninitialized urandom read (16 bytes read)
[    5.939514] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.939825] random: systemd: uninitialized urandom read (16 bytes read)
[    5.940094] systemd[1]: Listening on Journal Audit Socket.
[    5.940206] random: systemd: uninitialized urandom read (16 bytes read)
[    5.940466] systemd[1]: Listening on udev Control Socket.
[    5.940706] systemd[1]: Listening on Journal Socket.
[    5.940819] systemd[1]: Reached target Swap.
[    5.944135] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.951494] systemd[1]: Listening on Process Core Dump Socket.
[    6.001022] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.001088] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    6.711663] audit: type=1130 audit(1567421029.027:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.729340] systemd-journald[290]: Received request to flush runtime journal from PID 1
[    6.809397] audit: type=1130 audit(1567421029.124:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.836038] audit: type=1130 audit(1567421029.150:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.892667] acpi_cpufreq: overriding BIOS provided _PSD data
[    6.904843] input: HP Wireless hotkeys as /devices/virtual/input/input7
[    6.917111] ACPI: AC Adapter [ACAD] (on-line)
[    6.953255] wmi_bus wmi_bus-PNP0C14:00: WQBJ data block query control method not found
[    6.983689] ccp 0000:00:08.0: 4 command queues available
[    6.984553] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB.PCI0.SMBS.SMB0) (20190509/utaddress-204)
[    6.984564] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.014893] ccp 0000:00:08.0: ccp enabled
[    7.032480] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    7.032649] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    7.032654] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[    7.033151] tpm_crb MSFT0101:00: can't request region for resource [mem 0x8fb72000-0x8fc71fff]
[    7.035743] tpm_crb: probe of MSFT0101:00 failed with error -16
[    7.057550] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    7.094777] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb3/3-2/3-2:1.0/0003:413C:301A.0001/input/input9
[    7.098235] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:10.0-2/input0
[    7.114117] cryptd: max_cpu_qlen set to 1000
[    7.162038] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    7.184556] libphy: r8169: probed
[    7.184992] r8169 0000:03:00.0 eth0: RTL8106e, 70:5a:0f:c1:c9:56, XID 449, IRQ 42
[    7.216304] audit: type=1130 audit(1567421029.530:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.228726] media: Linux media interface: v0.10
[    7.234459] AVX version of gcm_enc/dec engaged.
[    7.234464] AES CTR mode by8 optimization enabled
[    7.254029] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.284465] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.285486] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    7.285492] cfg80211: failed to load regulatory.db
[    7.288935] audit: type=1130 audit(1567421029.604:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-C304\x2d7822 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.388795] videodev: Linux video capture interface: v2.00
[    7.417455] Intel(R) Wireless WiFi driver for Linux
[    7.417465] Copyright(c) 2003- 2015 Intel Corporation
[    7.427623] Bluetooth: Core ver 2.22
[    7.433663] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[    7.435393] iwlwifi 0000:02:00.0: Found debug destination: EXTERNAL_DRAM
[    7.435399] iwlwifi 0000:02:00.0: Found debug configuration: 0
[    7.437005] iwlwifi 0000:02:00.0: loaded firmware version 36.77d01142.0 op_mode iwlmvm
[    7.437702] NET: Registered protocol family 31
[    7.437705] Bluetooth: HCI device and connection manager initialized
[    7.437710] Bluetooth: HCI socket layer initialized
[    7.437714] Bluetooth: L2CAP socket layer initialized
[    7.437722] Bluetooth: SCO socket layer initialized
[    7.466707] audit: type=1130 audit(1567421029.780:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.480026] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input12
[    7.500353] audit: type=1127 audit(1567421029.814:8): pid=426 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[    7.506608] audit: type=1130 audit(1567421029.820:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.508758] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    7.508764] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.508767] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    7.508769] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    7.508771] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    7.508774] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x19
[    7.508777] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[    7.528183] battery: ACPI: Battery Slot [BAT1] (battery present)
[    7.533064] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[    7.533178] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[    7.533273] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[    7.537126] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    7.540519] usbcore: registered new interface driver btusb
[    7.541333] mousedev: PS/2 mouse device common for all mice
[    7.549542] Bluetooth: hci0: Firmware revision 0.0 build 10 week 41 2018
[    7.554866] pktcdvd: pktcdvd0: writer mapped to sr0
[    7.554959] uvcvideo: Found UVC 1.00 device HP Truevision HD (0bda:57d6)
[    7.565841] uvcvideo 2-1.1:1.0: Entity type for entity Extension 4 was not initialized!
[    7.565847] uvcvideo 2-1.1:1.0: Entity type for entity Processing 2 was not initialized!
[    7.565850] uvcvideo 2-1.1:1.0: Entity type for entity Camera 1 was not initialized!
[    7.565988] input: HP Truevision HD: HP Truevision as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input16
[    7.566130] usbcore: registered new interface driver uvcvideo
[    7.566132] USB Video Class driver (1.1.1)
[    7.641565] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[    7.649524] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    7.650996] iwlwifi 0000:02:00.0: Allocated 0x00400000 bytes for firmware monitor.
[    7.726656] iwlwifi 0000:02:00.0: base HW address: 34:13:e8:3a:26:c2
[    7.736546] audit: type=1130 audit(1567421030.050:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.824131] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[    7.834151] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    7.834737] thermal thermal_zone2: failed to read out thermal zone (-61)
[    7.843341] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    7.854437] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[    7.854450] psmouse serio1: synaptics: Your touchpad (PNP: SYN1efc PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    7.911250] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3127, fw id: 8526786
[    7.947452] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[    8.029676] kvm: Nested Virtualization enabled
[    8.029683] kvm: Nested Paging enabled
[    8.040064] MCE: In-kernel MCE decoding enabled.
[    8.064820] EDAC amd64: Node 0: DRAM ECC disabled.
[    8.064825] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    8.105388] EDAC amd64: Node 0: DRAM ECC disabled.
[    8.105392] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    8.145460] hp_wmi: query 0xd returned error 0x5
[    8.145581] input: HP WMI hotkeys as /devices/virtual/input/input11
[    8.149125] EDAC amd64: Node 0: DRAM ECC disabled.
[    8.149130] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    8.196938] EDAC amd64: Node 0: DRAM ECC disabled.
[    8.196943] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    8.204233] [drm] amdgpu kernel modesetting enabled.
[    8.204273] vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[    8.205516] ATPX version 1, functions 0x00000003
[    8.207235] CRAT table not found
[    8.207239] Virtual CRAT table created for CPU
[    8.207241] Parsing CRAT table with 1 nodes
[    8.207244] Creating topology SYSFS entries
[    8.207265] Topology: Add CPU node
[    8.207266] Finished initializing topology
[    8.256473] audit: type=1130 audit(1567421030.570:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:radeon_bl0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.470490] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.470493] Bluetooth: BNEP filters: protocol multicast
[    8.470502] Bluetooth: BNEP socket layer initialized
[    9.278397] Generic PHY r8169-300:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[    9.532176] r8169 0000:03:00.0 enp3s0: Link is Down
[    9.545307] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    9.701006] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    9.788741] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[    9.817098] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    9.972278] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[   10.059983] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[   10.323555] random: crng init done
[   10.323560] random: 7 urandom warning(s) missed due to ratelimiting
[   11.741533] Adding 524284k swap on /var/lib/systemd-swap/swapfc/1.  Priority:-2 extents:54 across:5773308k SSFS
[   12.437860] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[   12.813460] kauditd_printk_skb: 14 callbacks suppressed
[   12.813464] audit: type=1131 audit(1567421035.127:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.888611] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[   12.888754] radeon 0000:01:00.0: WB enabled
[   12.888761] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x000000008640e42b
[   12.888764] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000ae2306ce
[   12.888766] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x000000003bd78a11
[   12.888769] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x000000008f72862d
[   12.888771] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x0000000044e45f7f
[   13.303842] [drm] ring test on 0 succeeded in 1 usecs
[   13.303850] [drm] ring test on 1 succeeded in 1 usecs
[   13.303857] [drm] ring test on 2 succeeded in 1 usecs
[   13.303870] [drm] ring test on 3 succeeded in 5 usecs
[   13.303878] [drm] ring test on 4 succeeded in 4 usecs
[   13.303910] [drm] ib test on ring 0 succeeded in 0 usecs
[   13.303961] [drm] ib test on ring 1 succeeded in 0 usecs
[   13.303999] [drm] ib test on ring 2 succeeded in 0 usecs
[   13.304019] [drm] ib test on ring 3 succeeded in 0 usecs
[   13.304035] [drm] ib test on ring 4 succeeded in 0 usecs
[   15.015733] audit: type=1130 audit(1567421037.330:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.032756] audit: type=1006 audit(1567421037.347:28): pid=650 uid=0 old-auid=4294967295 auid=620 tty=(none) old-ses=4294967295 ses=1 res=1
[   15.186395] audit: type=1130 audit(1567421037.500:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.120062] fuse: init (API version 7.31)
[   16.743369] audit: type=1130 audit(1567421039.057:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.018838] audit: type=1131 audit(1567421041.334:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   39.197303] audit: type=1131 audit(1567421061.510:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   82.435347] audit: type=1006 audit(1567421104.750:33): pid=743 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   82.477742] audit: type=1130 audit(1567421104.790:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   82.495059] audit: type=1006 audit(1567421104.810:35): pid=1263 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[   82.626393] audit: type=1130 audit(1567421104.940:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   82.658137] audit: type=1112 audit(1567421104.974:37): pid=743 uid=0 auid=1000 ses=2 msg='op=login id=1000 exe="/usr/bin/lightdm" hostname=Lenovo addr=? terminal=/dev/tty7 res=success'
[   83.296290] wlp2s0: authenticate with 8c:15:c7:04:4b:68
[   83.311056] wlp2s0: send auth to 8c:15:c7:04:4b:68 (try 1/3)
[   83.418457] wlp2s0: send auth to 8c:15:c7:04:4b:68 (try 2/3)
[   83.419411] wlp2s0: authenticated
[   83.421658] wlp2s0: associate with 8c:15:c7:04:4b:68 (try 1/3)
[   83.423450] wlp2s0: RX AssocResp from 8c:15:c7:04:4b:68 (capab=0x11 status=0 aid=3)
[   83.425625] wlp2s0: associated
[   83.567590] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 8c:15:c7:04:4b:68
[   83.568165] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   83.691342] audit: type=1130 audit(1567421106.004:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   83.917097] audit: type=1130 audit(1567421106.230:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   92.677724] audit: type=1131 audit(1567421114.990:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   92.750438] audit: type=1131 audit(1567421115.064:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   94.013105] audit: type=1131 audit(1567421116.327:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

Offline

#5 2019-09-02 11:24:59

loqs
Member
Registered: 2014-03-06
Posts: 15,351

Re: Intel 8260 Bluetooth: hci0: Failed to send firmware data (-38)

[    7.549542] Bluetooth: hci0: Firmware revision 0.0 build 10 week 41 2018

Was the issue present on that boot?

Offline

#6 2019-09-02 12:03:19

anubium
Member
Registered: 2019-05-31
Posts: 9

Re: Intel 8260 Bluetooth: hci0: Failed to send firmware data (-38)

loqs wrote:
[    7.549542] Bluetooth: hci0: Firmware revision 0.0 build 10 week 41 2018

Was the issue present on that boot?

Interestingly enough, the error message I was getting before ([    8.391659] Bluetooth: hci0: Failed to send firmware data (-38)) was not present on that boot. However, I am still unable to connect to devices.

The only thing I can think of that possibly changed is me downloading iwlwifi-8000-ucode-16.242414.0.tgz, the firmware specified for the Intel 8260 on the kernel wireless wiki.

I guess I could try removing it to see if that caused a change.

Offline

#7 2019-09-02 12:23:33

anubium
Member
Registered: 2019-05-31
Posts: 9

Re: Intel 8260 Bluetooth: hci0: Failed to send firmware data (-38)

OK... Well that seems to have actually made Bluetooth work, at least with my phone. I was able to transfer small files (<0.5MB) to and from. However, transferring larger files (e.g. 3MB) seems to fail. Not sure if this issue is related.
I do not have my bluetooth headphones with me at the moment to see if audio over bluetooth works.

My question now is, the file I copied into /lib/firmware is named iwlwifi-8000C-16.ucode. There are other such files there:

iwlwifi-8000C-13.ucode
iwlwifi-8000C-16.ucode
iwlwifi-8000C-21.ucode
iwlwifi-8000C-22.ucode
iwlwifi-8000C-27.ucode
iwlwifi-8000C-31.ucode
iwlwifi-8000C-34.ucode
iwlwifi-8000C-36.ucode

Why wouldn't one of the other ones work? And why wouldn't a ucode file with a larger number be used instead of the one I downloaded?

Offline

#8 2019-09-02 12:29:09

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 17,064

Re: Intel 8260 Bluetooth: hci0: Failed to send firmware data (-38)

[    7.437005] iwlwifi 0000:02:00.0: loaded firmware version 36.77d01142.0 op_mode iwlmvm

It's using the one with the largest number. What you could actually try here is renaming the one with the largest number so that it might fallback to a lower numbered one which might help with the issue.

Offline

#9 2019-09-02 13:09:37

anubium
Member
Registered: 2019-05-31
Posts: 9

Re: Intel 8260 Bluetooth: hci0: Failed to send firmware data (-38)

V1del wrote:
[    7.437005] iwlwifi 0000:02:00.0: loaded firmware version 36.77d01142.0 op_mode iwlmvm

It's using the one with the largest number. What you could actually try here is renaming the one with the largest number so that it might fallback to a lower numbered one which might help with the issue.

Well, I just removed the firmware version 16 and rebooted, and it still loads version 36. But it works, it no longer gives the Failed to send firmware data (-38) error. I have no idea what changed between those two reboots, maybe the older firmware did something even while not being loaded? Maybe something else?

Either way, the laptop's bluetooth receiver appears to be quite weak, and the connection feeble. Do you think these issues are related to the firmware?

Edit:
Also, in a previous dmesg it looked like the system was loading a different firmware for the bluetooth than the WiFi:

[  173.946632] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi

should I be looking at that for Bluetooth problems rather than iwlwifi?

Last edited by anubium (2019-09-02 13:17:45)

Offline

#10 2019-09-02 15:08:53

loqs
Member
Registered: 2014-03-06
Posts: 15,351

Re: Intel 8260 Bluetooth: hci0: Failed to send firmware data (-38)

https://git.kernel.org/pub/scm/linux/ke … e43822747b is the last update to the intel/ibt-11-5.sfi.
The linux-firmware package already has that commit.
There was a recent update for iwlwifi-8000C-36.ucode but the commit does not document what changes it contains https://git.kernel.org/pub/scm/linux/ke … 9832af1dde

Offline

#11 2019-09-02 15:51:34

anubium
Member
Registered: 2019-05-31
Posts: 9

Re: Intel 8260 Bluetooth: hci0: Failed to send firmware data (-38)

loqs wrote:

https://git.kernel.org/pub/scm/linux/ke … e43822747b is the last update to the intel/ibt-11-5.sfi.
The linux-firmware package already has that commit.
There was a recent update for iwlwifi-8000C-36.ucode but the commit does not document what changes it contains https://git.kernel.org/pub/scm/linux/ke … 9832af1dde

How long would that update have taken to enter the Arch Linux kernel? I definitely updated my system since the 23rd, before today.
Looking at my /var/log/pacman.log, the last time I upgraded my system was on 31/08 and the last time I installed some packages was 01/08. Last kernel update:

[2019-08-30 10:02] [ALPM] upgraded linux (5.2.9.arch1-1 -> 5.2.11.arch1-1)

Either way, the error message seems to have only disappeared today, in between reboots, so it might have been something else I did?

Offline

#12 2019-09-02 16:31:18

loqs
Member
Registered: 2014-03-06
Posts: 15,351

Re: Intel 8260 Bluetooth: hci0: Failed to send firmware data (-38)

Since linux-firmware 20190118.a8b75ca-1 [1]

[1] https://git.archlinux.org/svntogit/pack … 1323988838

Offline

#13 2019-09-02 20:54:10

anubium
Member
Registered: 2019-05-31
Posts: 9

Re: Intel 8260 Bluetooth: hci0: Failed to send firmware data (-38)

loqs wrote:

Since linux-firmware 20190118.a8b75ca-1 [1]

[1] https://git.archlinux.org/svntogit/pack … 1323988838

I'm not sure which of the two you're referring to, but I've had that version of the package installed since 26/01/19.

Offline

#14 2019-09-03 07:31:31

anubium
Member
Registered: 2019-05-31
Posts: 9

Re: Intel 8260 Bluetooth: hci0: Failed to send firmware data (-38)

Ok, so I have started the PC again today and the error message is back. Thus I captured a full dmesg output just after logging in:

[    0.000000] Linux version 5.2.11-arch1-1-ARCH (builduser@heftig-107976) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Thu Aug 29 08:09:36 UTC 2019
[    0.000000] Command line: root=PARTUUID=b236777d-786c-4573-8f8d-dd671e33938c rw initrd=/amd-ucode.img initrd=\initramfs-linux.img
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000083aecfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000083aed000-0x00000000842edfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000842ee000-0x000000008e17efff] usable
[    0.000000] BIOS-e820: [mem 0x000000008e17f000-0x000000008f97efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008f97f000-0x000000008fb7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008fb7f000-0x000000008fbfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008fbff000-0x000000008fbfffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008fc00000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0900000-0x00000000f09fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x81b22018-0x81b30c57] usable ==> usable
[    0.000000] e820: update [mem 0x81b22018-0x81b30c57] usable ==> usable
[    0.000000] e820: update [mem 0x81b19018-0x81b21057] usable ==> usable
[    0.000000] e820: update [mem 0x81b19018-0x81b21057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000085fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000086000-0x00000000000bffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000081b19017] usable
[    0.000000] reserve setup_data: [mem 0x0000000081b19018-0x0000000081b21057] usable
[    0.000000] reserve setup_data: [mem 0x0000000081b21058-0x0000000081b22017] usable
[    0.000000] reserve setup_data: [mem 0x0000000081b22018-0x0000000081b30c57] usable
[    0.000000] reserve setup_data: [mem 0x0000000081b30c58-0x0000000083aecfff] usable
[    0.000000] reserve setup_data: [mem 0x0000000083aed000-0x00000000842edfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000842ee000-0x000000008e17efff] usable
[    0.000000] reserve setup_data: [mem 0x000000008e17f000-0x000000008f97efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000008f97f000-0x000000008fb7efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000008fb7f000-0x000000008fbfefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000008fbff000-0x000000008fbfffff] usable
[    0.000000] reserve setup_data: [mem 0x000000008fc00000-0x00000000cfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f0900000-0x00000000f09fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000022effffff] usable
[    0.000000] efi: EFI v2.31 by INSYDE Corp.
[    0.000000] efi:  ESRT=0x8f09bc18  ACPI=0x8fbfe000  ACPI 2.0=0x8fbfe014  SMBIOS=0x8f97ef98  TPMEventLog=0x81b31018 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: HP HP Notebook/80CC, BIOS F.23 04/13/2017
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2195.699 MHz processor
[    0.000050] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000053] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000063] last_pfn = 0x22f000 max_arch_pfn = 0x400000000
[    0.000072] MTRR default type: uncachable
[    0.000073] MTRR fixed ranges enabled:
[    0.000076]   00000-9FFFF write-back
[    0.000078]   A0000-BFFFF uncachable
[    0.000080]   C0000-FFFFF write-through
[    0.000081] MTRR variable ranges enabled:
[    0.000083]   0 base 0000000000 mask FF80000000 write-back
[    0.000086]   1 base 0080000000 mask FFF0000000 write-back
[    0.000088]   2 base 008FB47000 mask FFFFFFF000 uncachable
[    0.000090]   3 base 00FF800000 mask FFFF800000 write-protect
[    0.000091]   4 disabled
[    0.000092]   5 disabled
[    0.000094]   6 disabled
[    0.000095]   7 disabled
[    0.000096] TOM2: 000000022f000000 aka 8944M
[    0.001251] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001501] last_pfn = 0x8fc00 max_arch_pfn = 0x400000000
[    0.009147] esrt: Reserving ESRT space from 0x000000008f09bc18 to 0x000000008f09bc50.
[    0.009179] check: Scanning 1 areas for low memory corruption
[    0.009189] Using GB pages for direct mapping
[    0.009195] BRK [0x19d401000, 0x19d401fff] PGTABLE
[    0.009201] BRK [0x19d402000, 0x19d402fff] PGTABLE
[    0.009203] BRK [0x19d403000, 0x19d403fff] PGTABLE
[    0.009278] BRK [0x19d404000, 0x19d404fff] PGTABLE
[    0.009281] BRK [0x19d405000, 0x19d405fff] PGTABLE
[    0.009681] BRK [0x19d406000, 0x19d406fff] PGTABLE
[    0.009809] BRK [0x19d407000, 0x19d407fff] PGTABLE
[    0.009985] BRK [0x19d408000, 0x19d408fff] PGTABLE
[    0.010235] BRK [0x19d409000, 0x19d409fff] PGTABLE
[    0.010382] BRK [0x19d40a000, 0x19d40afff] PGTABLE
[    0.010545] Secure boot disabled
[    0.010547] RAMDISK: [mem 0x7f20e000-0x7fffefff]
[    0.010561] ACPI: Early table checksum verification disabled
[    0.010572] ACPI: RSDP 0x000000008FBFE014 000024 (v02 HPQOEM)
[    0.010578] ACPI: XSDT 0x000000008FBC4188 0000DC (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.010591] ACPI: FACP 0x000000008FBFB000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.010603] ACPI: DSDT 0x000000008FBE8000 00E676 (v01 HPQOEM SLIC-MPC F0000000 ACPI 00040000)
[    0.010609] ACPI: FACS 0x000000008FB04000 000040
[    0.010613] ACPI: TCPA 0x000000008FBFD000 000032 (v02 HPQOEM 80CB     00000000 HP   00040000)
[    0.010618] ACPI: UEFI 0x000000008FBFC000 000236 (v01 HPQOEM 80CB     00000001 HP   00040000)
[    0.010623] ACPI: HPET 0x000000008FBFA000 000038 (v01 HPQOEM 80CB     00000001 HP   00040000)
[    0.010627] ACPI: APIC 0x000000008FBF9000 000090 (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.010632] ACPI: MCFG 0x000000008FBF8000 00003C (v01 HPQOEM 80CB     00000001 HP   00040000)
[    0.010637] ACPI: ASF! 0x000000008FBF7000 0000A5 (v32 HPQOEM 80CB     00000001 HP   00040000)
[    0.010642] ACPI: BOOT 0x000000008FBE7000 000028 (v01 HPQOEM 80CB     00000001 HP   00040000)
[    0.010647] ACPI: FPDT 0x000000008FBE5000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.010651] ACPI: MSDM 0x000000008FBE4000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.010656] ACPI: SSDT 0x000000008FBE3000 000CB4 (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010660] ACPI: SSDT 0x000000008FBDE000 0048A6 (v02 HPQOEM 80CB     00000002 ACPI 00040000)
[    0.010665] ACPI: VFCT 0x000000008FBCF000 00EC84 (v01 HPQOEM 80CB     00000001 HP   00040000)
[    0.010670] ACPI: SSDT 0x000000008FBCE000 00041A (v01 HPQOEM 80CB     00001000 ACPI 00040000)
[    0.010674] ACPI: TPM2 0x000000008FBCD000 000044 (v03 HPQOEM 80CB     20505350 HP   00040000)
[    0.010679] ACPI: SSDT 0x000000008FBCC000 000692 (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010684] ACPI: SSDT 0x000000008FBCB000 000418 (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010688] ACPI: SSDT 0x000000008FBC9000 0017D0 (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010693] ACPI: SSDT 0x000000008FBC8000 00082B (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010698] ACPI: SSDT 0x000000008FBC7000 00008C (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010702] ACPI: SSDT 0x000000008FBC5000 001153 (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010707] ACPI: BGRT 0x000000008FBC3000 000038 (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010711] ACPI: SSDT 0x000000008FBC2000 000F8A (v01 HPQOEM 80CB     00000001 ACPI 00040000)
[    0.010729] ACPI: Local APIC address 0xfee00000
[    0.010905] No NUMA configuration found
[    0.010907] Faking a node at [mem 0x0000000000000000-0x000000022effffff]
[    0.010914] NODE_DATA(0) allocated [mem 0x22effc000-0x22effffff]
[    0.010967] Zone ranges:
[    0.010968]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.010971]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.010972]   Normal   [mem 0x0000000100000000-0x000000022effffff]
[    0.010974]   Device   empty
[    0.010976] Movable zone start for each node
[    0.010977] Early memory node ranges
[    0.010978]   node   0: [mem 0x0000000000001000-0x000000000006dfff]
[    0.010980]   node   0: [mem 0x0000000000070000-0x0000000000085fff]
[    0.010981]   node   0: [mem 0x0000000000100000-0x0000000083aecfff]
[    0.010982]   node   0: [mem 0x00000000842ee000-0x000000008e17efff]
[    0.010983]   node   0: [mem 0x000000008fbff000-0x000000008fbfffff]
[    0.010985]   node   0: [mem 0x0000000100000000-0x000000022effffff]
[    0.011213] Zeroed struct page in unavailable ranges: 9982 pages
[    0.011216] Initmem setup node 0 [mem 0x0000000000001000-0x000000022effffff]
[    0.011219] On node 0 totalpages: 1820930
[    0.011221]   DMA zone: 64 pages used for memmap
[    0.011223]   DMA zone: 21 pages reserved
[    0.011224]   DMA zone: 3971 pages, LIFO batch:0
[    0.011339]   DMA32 zone: 8998 pages used for memmap
[    0.011340]   DMA32 zone: 575871 pages, LIFO batch:63
[    0.037123]   Normal zone: 19392 pages used for memmap
[    0.037131]   Normal zone: 1241088 pages, LIFO batch:63
[    0.085586] ACPI: PM-Timer IO Port: 0x408
[    0.085594] ACPI: Local APIC address 0xfee00000
[    0.085612] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.085614] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.085616] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.085617] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.085633] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.085640] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
[    0.085644] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.085648] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.085651] ACPI: IRQ0 used by override.
[    0.085652] ACPI: IRQ9 used by override.
[    0.085656] Using ACPI (MADT) for SMP configuration information
[    0.085659] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.085691] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.085737] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.085740] PM: Registered nosave memory: [mem 0x0006e000-0x0006ffff]
[    0.085743] PM: Registered nosave memory: [mem 0x00086000-0x000bffff]
[    0.085744] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.085747] PM: Registered nosave memory: [mem 0x81b19000-0x81b19fff]
[    0.085750] PM: Registered nosave memory: [mem 0x81b21000-0x81b21fff]
[    0.085751] PM: Registered nosave memory: [mem 0x81b22000-0x81b22fff]
[    0.085754] PM: Registered nosave memory: [mem 0x81b30000-0x81b30fff]
[    0.085757] PM: Registered nosave memory: [mem 0x83aed000-0x842edfff]
[    0.085760] PM: Registered nosave memory: [mem 0x8e17f000-0x8f97efff]
[    0.085761] PM: Registered nosave memory: [mem 0x8f97f000-0x8fb7efff]
[    0.085762] PM: Registered nosave memory: [mem 0x8fb7f000-0x8fbfefff]
[    0.085765] PM: Registered nosave memory: [mem 0x8fc00000-0xcfffffff]
[    0.085766] PM: Registered nosave memory: [mem 0xd0000000-0xf08fffff]
[    0.085767] PM: Registered nosave memory: [mem 0xf0900000-0xf09fffff]
[    0.085768] PM: Registered nosave memory: [mem 0xf0a00000-0xf7ffffff]
[    0.085769] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.085771] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.085772] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[    0.085773] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.085774] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.085775] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[    0.085776] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[    0.085777] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[    0.085778] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.085779] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.085780] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.085784] [mem 0xd0000000-0xf08fffff] available for PCI devices
[    0.085786] Booting paravirtualized kernel on bare hardware
[    0.085794] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.254145] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.255568] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[    0.255595] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[    0.255597] pcpu-alloc: [0] 0 1 2 3 
[    0.255644] Built 1 zonelists, mobility grouping on.  Total pages: 1792455
[    0.255645] Policy zone: Normal
[    0.255650] Kernel command line: root=PARTUUID=b236777d-786c-4573-8f8d-dd671e33938c rw initrd=/amd-ucode.img initrd=\initramfs-linux.img
[    0.295100] Calgary: detecting Calgary via BIOS EBDA area
[    0.295108] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.371539] Memory: 7010240K/7283720K available (12291K kernel code, 1319K rwdata, 3904K rodata, 1608K init, 3616K bss, 273480K reserved, 0K cma-reserved)
[    0.371887] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.371922] ftrace: allocating 37395 entries in 147 pages
[    0.398623] rcu: Preemptible hierarchical RCU implementation.
[    0.398629] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.398629] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.398631] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.398632] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.398634] 	Tasks RCU enabled.
[    0.398636] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.398637] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.402273] NR_IRQS: 20736, nr_irqs: 1000, preallocated irqs: 16
[    0.402571] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.402763] random: get_random_bytes called from start_kernel+0x37e/0x559 with crng_init=0
[    0.402823] Console: colour dummy device 80x25
[    0.402836] printk: console [tty0] enabled
[    0.402878] ACPI: Core revision 20190509
[    0.403435] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.403454] hpet clockevent registered
[    0.403466] APIC: Switch to symmetric I/O mode setup
[    0.404124] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.420130] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa6540ff48, max_idle_ns: 440795313077 ns
[    0.420142] Calibrating delay loop (skipped), value calculated using timer frequency.. 4393.37 BogoMIPS (lpj=7318996)
[    0.420146] pid_max: default: 32768 minimum: 301
[    0.426938] LSM: Security Framework initializing
[    0.426952] Yama: becoming mindful.
[    0.433357] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.436094] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.436257] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.436340] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.436688] *** VALIDATE proc ***
[    0.436864] *** VALIDATE cgroup1 ***
[    0.436868] *** VALIDATE cgroup2 ***
[    0.436953] BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.
[    0.436982] LVT offset 1 assigned for vector 0xf9
[    0.436990] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.436991] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[    0.436994] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.436997] Spectre V2 : Mitigation: Full AMD retpoline
[    0.436999] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.437002] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.437359] Freeing SMP alternatives memory: 32K
[    0.547203] smpboot: CPU0: AMD A8-7410 APU with AMD Radeon R5 Graphics (family: 0x16, model: 0x30, stepping: 0x1)
[    0.566866] Performance Events: AMD PMU driver.
[    0.566876] ... version:                0
[    0.566877] ... bit width:              48
[    0.566878] ... generic registers:      4
[    0.566879] ... value mask:             0000ffffffffffff
[    0.566880] ... max period:             00007fffffffffff
[    0.566881] ... fixed-purpose events:   0
[    0.566882] ... event mask:             000000000000000f
[    0.573518] rcu: Hierarchical SRCU implementation.
[    0.596894] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.603541] smp: Bringing up secondary CPUs ...
[    0.643561] x86: Booting SMP configuration:
[    0.643565] .... node  #0, CPUs:      #1
[    0.004212] do_IRQ: 1.55 No irq handler for vector
[    0.683538]  #2
[    0.004212] do_IRQ: 2.55 No irq handler for vector
[    0.723549]  #3
[    0.004212] do_IRQ: 3.55 No irq handler for vector
[    0.725699] smp: Brought up 1 node, 4 CPUs
[    0.725699] smpboot: Max logical packages: 1
[    0.725699] smpboot: Total of 4 processors activated (17572.49 BogoMIPS)
[    0.727373] devtmpfs: initialized
[    0.727373] x86/mm: Memory block size: 128MB
[    0.728133] PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes)
[    0.728133] PM: Registering ACPI NVS region [mem 0x8f97f000-0x8fb7efff] (2097152 bytes)
[    0.728133] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.728133] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.728133] pinctrl core: initialized pinctrl subsystem
[    0.728133] PM: RTC time: 07:22:02, date: 2019-09-03
[    0.728133] NET: Registered protocol family 16
[    0.728133] audit: initializing netlink subsys (disabled)
[    0.728133] audit: type=2000 audit(1567495321.323:1): state=initialized audit_enabled=0 res=1
[    0.730163] cpuidle: using governor ladder
[    0.730163] cpuidle: using governor menu
[    0.730186] Simple Boot Flag at 0x44 set to 0x1
[    0.730224] ACPI: bus type PCI registered
[    0.730227] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.730338] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.730349] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.730349] PCI: Using configuration type 1 for base access
[    0.731926] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.731926] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.736986] fbcon: Taking over console
[    0.737021] ACPI: Added _OSI(Module Device)
[    0.737023] ACPI: Added _OSI(Processor Device)
[    0.737025] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.737026] ACPI: Added _OSI(Processor Aggregator Device)
[    0.737028] ACPI: Added _OSI(Linux-Dell-Video)
[    0.737030] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.737031] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.767390] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.773945] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.780901] ACPI: EC: EC started
[    0.780902] ACPI: EC: interrupt blocked
[    0.781394] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
[    0.781397] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.781400] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
[    0.781400] ACPI: Interpreter enabled
[    0.781438] ACPI: (supports S0 S3 S4 S5)
[    0.781440] ACPI: Using IOAPIC for interrupt routing
[    0.781864] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.782332] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.797502] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.797513] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.797522] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.797547] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.798054] PCI host bridge to bus 0000:00
[    0.798058] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.798060] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.798062] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.798065] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.798067] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.798069] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.798071] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.798073] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.798075] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.798077] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.798079] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.798081] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.798083] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.798085] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.798087] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.798089] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window]
[    0.798091] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
[    0.798093] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
[    0.798096] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.798107] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
[    0.798272] pci 0000:00:01.0: [1002:9851] type 00 class 0x030000
[    0.798291] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.798300] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.798306] pci 0000:00:01.0: reg 0x20: [io  0x4000-0x40ff]
[    0.798313] pci 0000:00:01.0: reg 0x24: [mem 0xf0e00000-0xf0e3ffff]
[    0.798319] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.798323] pci 0000:00:01.0: enabling Extended Tags
[    0.798337] pci 0000:00:01.0: BAR 0: assigned to efifb
[    0.798370] pci 0000:00:01.0: supports D1 D2
[    0.798372] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    0.798521] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[    0.798538] pci 0000:00:01.1: reg 0x10: [mem 0xf0e60000-0xf0e63fff 64bit]
[    0.798561] pci 0000:00:01.1: enabling Extended Tags
[    0.798596] pci 0000:00:01.1: supports D1 D2
[    0.798713] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
[    0.798853] pci 0000:00:02.1: [1022:1439] type 01 class 0x060400
[    0.798889] pci 0000:00:02.1: enabling Extended Tags
[    0.798930] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[    0.799070] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
[    0.799105] pci 0000:00:02.4: enabling Extended Tags
[    0.799147] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[    0.799289] pci 0000:00:02.5: [1022:1439] type 01 class 0x060400
[    0.799325] pci 0000:00:02.5: enabling Extended Tags
[    0.799366] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
[    0.799508] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
[    0.799522] pci 0000:00:08.0: reg 0x10: [mem 0xf0e40000-0xf0e5ffff 64bit pref]
[    0.799527] pci 0000:00:08.0: reg 0x18: [mem 0xf0a00000-0xf0afffff]
[    0.799533] pci 0000:00:08.0: reg 0x1c: [mem 0xf0e70000-0xf0e70fff]
[    0.799541] pci 0000:00:08.0: reg 0x24: [mem 0xf0e6a000-0xf0e6bfff]
[    0.799693] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[    0.799718] pci 0000:00:10.0: reg 0x10: [mem 0xf0e68000-0xf0e69fff 64bit]
[    0.799812] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.799960] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
[    0.799978] pci 0000:00:11.0: reg 0x10: [io  0x4118-0x411f]
[    0.799985] pci 0000:00:11.0: reg 0x14: [io  0x4124-0x4127]
[    0.799993] pci 0000:00:11.0: reg 0x18: [io  0x4110-0x4117]
[    0.800001] pci 0000:00:11.0: reg 0x1c: [io  0x4120-0x4123]
[    0.800008] pci 0000:00:11.0: reg 0x20: [io  0x4100-0x410f]
[    0.800017] pci 0000:00:11.0: reg 0x24: [mem 0xf0e6f000-0xf0e6f3ff]
[    0.800058] pci 0000:00:11.0: PME# supported from D3hot
[    0.800330] pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
[    0.800348] pci 0000:00:12.0: reg 0x10: [mem 0xf0e6e000-0xf0e6e0ff]
[    0.800412] pci 0000:00:12.0: supports D1 D2
[    0.800414] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.800542] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
[    0.800559] pci 0000:00:13.0: reg 0x10: [mem 0xf0e6d000-0xf0e6d0ff]
[    0.800623] pci 0000:00:13.0: supports D1 D2
[    0.800625] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.800753] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.800923] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.800944] pci 0000:00:14.2: reg 0x10: [mem 0xf0e64000-0xf0e67fff 64bit]
[    0.801004] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.801132] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.801307] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
[    0.801327] pci 0000:00:14.7: reg 0x10: [mem 0xf0e6c000-0xf0e6c0ff 64bit]
[    0.801382] pci 0000:00:14.7: PME# supported from D3cold
[    0.801501] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
[    0.801624] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
[    0.801745] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
[    0.801868] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
[    0.801992] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
[    0.802112] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
[    0.802350] pci 0000:01:00.0: [1002:6660] type 00 class 0x038000
[    0.802381] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.802395] pci 0000:01:00.0: reg 0x18: [mem 0xf0d00000-0xf0d3ffff 64bit]
[    0.802405] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.802422] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.802432] pci 0000:01:00.0: enabling Extended Tags
[    0.802499] pci 0000:01:00.0: supports D1 D2
[    0.802501] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.802538] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:00:02.1 (capable of 63.008 Gb/s with 8 GT/s x8 link)
[    0.802647] pci 0000:00:02.1: PCI bridge to [bus 01]
[    0.802652] pci 0000:00:02.1:   bridge window [io  0x3000-0x3fff]
[    0.802655] pci 0000:00:02.1:   bridge window [mem 0xf0d00000-0xf0dfffff]
[    0.802660] pci 0000:00:02.1:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.802749] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
[    0.802800] pci 0000:02:00.0: reg 0x10: [mem 0xf0c00000-0xf0c01fff 64bit]
[    0.802987] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.803166] pci 0000:00:02.4: PCI bridge to [bus 02]
[    0.803172] pci 0000:00:02.4:   bridge window [mem 0xf0c00000-0xf0cfffff]
[    0.803274] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.803310] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.803338] pci 0000:03:00.0: reg 0x18: [mem 0xf0b00000-0xf0b00fff 64bit]
[    0.803358] pci 0000:03:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
[    0.803479] pci 0000:03:00.0: supports D1 D2
[    0.803481] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.803651] pci 0000:00:02.5: PCI bridge to [bus 03]
[    0.803656] pci 0000:00:02.5:   bridge window [io  0x2000-0x2fff]
[    0.803659] pci 0000:00:02.5:   bridge window [mem 0xf0b00000-0xf0bfffff]
[    0.803664] pci 0000:00:02.5:   bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[    0.888856] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.889012] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.889193] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.889374] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.889528] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.889645] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.889762] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.889878] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.890230] platform MSFT0101:00: failed to claim resource 0: [mem 0x8fb6e000-0x8fc6dfff]
[    0.890243] acpi MSFT0101:00: platform device creation failed: -16
[    0.890571] ACPI: EC: interrupt unblocked
[    0.890582] ACPI: EC: event unblocked
[    0.890589] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.890592] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions and events
[    0.890741] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.890741] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.890741] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.890741] vgaarb: loaded
[    0.890741] ACPI: bus type USB registered
[    0.890741] usbcore: registered new interface driver usbfs
[    0.890741] usbcore: registered new interface driver hub
[    0.893472] usbcore: registered new device driver usb
[    0.893472] pps_core: LinuxPPS API ver. 1 registered
[    0.893472] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.893472] PTP clock support registered
[    0.893472] EDAC MC: Ver: 3.0.0
[    0.893528] Registered efivars operations
[    0.913672] PCI: Using ACPI for IRQ routing
[    0.914742] PCI: pci_cache_line_size set to 64 bytes
[    0.914830] e820: reserve RAM buffer [mem 0x0006e000-0x0006ffff]
[    0.914832] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[    0.914834] e820: reserve RAM buffer [mem 0x81b19018-0x83ffffff]
[    0.914835] e820: reserve RAM buffer [mem 0x81b22018-0x83ffffff]
[    0.914837] e820: reserve RAM buffer [mem 0x83aed000-0x83ffffff]
[    0.914838] e820: reserve RAM buffer [mem 0x8e17f000-0x8fffffff]
[    0.914840] e820: reserve RAM buffer [mem 0x8fc00000-0x8fffffff]
[    0.914841] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
[    0.916810] NetLabel: Initializing
[    0.916810] NetLabel:  domain hash size = 128
[    0.916810] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.916810] NetLabel:  unlabeled traffic allowed by default
[    0.916870] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.916875] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.918882] clocksource: Switched to clocksource tsc-early
[    0.939331] VFS: Disk quotas dquot_6.6.0
[    0.939358] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.939411] *** VALIDATE hugetlbfs ***
[    0.939500] pnp: PnP ACPI init
[    0.939932] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[    0.939936] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.939945] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.940385] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.940513] pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.940629] pnp 00:03: Plug and Play ACPI device, IDs SYN1efc PNP0f13 (active)
[    0.940711] system 00:04: [io  0x0400-0x04cf] has been reserved
[    0.940713] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.940716] system 00:04: [io  0x04d6] has been reserved
[    0.940718] system 00:04: [io  0x0680-0x06ff] has been reserved
[    0.940720] system 00:04: [io  0x077a] has been reserved
[    0.940723] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.940725] system 00:04: [io  0x0c14] has been reserved
[    0.940727] system 00:04: [io  0x0c50-0x0c52] has been reserved
[    0.940729] system 00:04: [io  0x0c6c] has been reserved
[    0.940731] system 00:04: [io  0x0c6f] has been reserved
[    0.940734] system 00:04: [io  0x0cd0-0x0cdb] has been reserved
[    0.940736] system 00:04: [io  0x0840-0x0847] has been reserved
[    0.940742] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.940891] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.940894] system 00:05: [mem 0xff800000-0xffffffff] has been reserved
[    0.940900] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.025152] pnp: PnP ACPI: found 6 devices
[    1.032803] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.032819] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: address conflict with Reserved [mem 0xff800000-0xffffffff]
[    1.032823] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    1.032863] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0e80000-0xf0e9ffff pref]
[    1.032869] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0d40000-0xf0d5ffff pref]
[    1.032873] pci 0000:00:02.1: PCI bridge to [bus 01]
[    1.032877] pci 0000:00:02.1:   bridge window [io  0x3000-0x3fff]
[    1.032882] pci 0000:00:02.1:   bridge window [mem 0xf0d00000-0xf0dfffff]
[    1.032885] pci 0000:00:02.1:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.032890] pci 0000:00:02.4: PCI bridge to [bus 02]
[    1.032895] pci 0000:00:02.4:   bridge window [mem 0xf0c00000-0xf0cfffff]
[    1.032901] pci 0000:00:02.5: PCI bridge to [bus 03]
[    1.032904] pci 0000:00:02.5:   bridge window [io  0x2000-0x2fff]
[    1.032909] pci 0000:00:02.5:   bridge window [mem 0xf0b00000-0xf0bfffff]
[    1.032912] pci 0000:00:02.5:   bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[    1.032920] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.032922] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.032924] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.032927] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    1.032929] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    1.032931] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    1.032933] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    1.032936] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    1.032938] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    1.032940] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    1.032942] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    1.032944] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    1.032947] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    1.032949] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    1.032951] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    1.032953] pci_bus 0000:00: resource 19 [mem 0xd0000000-0xf7ffffff window]
[    1.032956] pci_bus 0000:00: resource 20 [mem 0xfc000000-0xfed3ffff window]
[    1.032958] pci_bus 0000:00: resource 21 [mem 0xfed45000-0xffffffff window]
[    1.032960] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.032963] pci_bus 0000:01: resource 1 [mem 0xf0d00000-0xf0dfffff]
[    1.032965] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.032967] pci_bus 0000:02: resource 1 [mem 0xf0c00000-0xf0cfffff]
[    1.032969] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    1.032971] pci_bus 0000:03: resource 1 [mem 0xf0b00000-0xf0bfffff]
[    1.032974] pci_bus 0000:03: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
[    1.033187] NET: Registered protocol family 2
[    1.033419] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    1.033470] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.033664] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.033941] TCP: Hash tables configured (established 65536 bind 65536)
[    1.034030] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.034080] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.034291] NET: Registered protocol family 1
[    1.034301] NET: Registered protocol family 44
[    1.034325] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.040826] pci 0000:00:12.0: PME# does not work under D3, disabling it
[    1.041061] pci 0000:00:13.0: PME# does not work under D3, disabling it
[    1.041109] PCI: CLS 64 bytes, default 64
[    1.041203] Trying to unpack rootfs image as initramfs...
[    1.114563] Freeing initrd memory: 14276K
[    1.114570] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.114573] software IO TLB: mapped [mem 0x85d19000-0x89d19000] (64MB)
[    1.114640] amd_uncore: AMD NB counters detected
[    1.114644] amd_uncore: AMD LLC counters detected
[    1.114911] LVT offset 0 assigned for vector 0x400
[    1.114968] perf: AMD IBS detected (0x000000ff)
[    1.115071] check: Scanning for low memory corruption every 60 seconds
[    1.116087] Initialise system trusted keyrings
[    1.116108] Key type blacklist registered
[    1.116262] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    1.118816] zbud: loaded
[    1.121862] Key type asymmetric registered
[    1.121865] Asymmetric key parser 'x509' registered
[    1.121891] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.121987] io scheduler mq-deadline registered
[    1.121989] io scheduler kyber registered
[    1.122086] io scheduler bfq registered
[    1.123188] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.123329] efifb: probing for efifb
[    1.123388] efifb: framebuffer at 0xe0000000, using 4224k, total 4224k
[    1.123390] efifb: mode is 1366x768x32, linelength=5632, pages=1
[    1.123390] efifb: scrolling: redraw
[    1.123393] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.123569] Console: switching to colour frame buffer device 170x48
[    1.127845] fb0: EFI VGA frame buffer device
[    1.127926] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.127945] ACPI: Power Button [PWRB]
[    1.128042] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.128056] ACPI: Lid Switch [LID]
[    1.128123] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.129546] ACPI: Power Button [PWRF]
[    1.129697] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.132430] acpi device:00: registered as cooling_device0
[    1.132503] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.132577] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[    1.134889] acpi device:0a: registered as cooling_device1
[    1.134964] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input4
[    1.136082] thermal LNXTHERM:00: registered as thermal_zone0
[    1.136084] ACPI: Thermal Zone [TSZ0] (32 C)
[    1.136360] thermal LNXTHERM:01: registered as thermal_zone1
[    1.136362] ACPI: Thermal Zone [TSZ2] (20 C)
[    1.136671] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.137405] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.137407] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    1.138184] usbcore: registered new interface driver usbserial_generic
[    1.138192] usbserial: USB Serial support registered for generic
[    1.138218] rtc_cmos 00:01: RTC can wake from S4
[    1.138370] rtc_cmos 00:01: registered as rtc0
[    1.138398] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[    1.138577] ledtrig-cpu: registered to indicate activity on CPUs
[    1.138670] x86/pm: family 0x16 cpu detected, MSR saving is needed during suspending.
[    1.138973] NET: Registered protocol family 10
[    1.150917] Segment Routing with IPv6
[    1.150960] NET: Registered protocol family 17
[    1.151365] mce: Using 6 MCE banks
[    1.151392] RAS: Correctable Errors collector initialized.
[    1.151465] microcode: CPU0: patch_level=0x07030105
[    1.151471] microcode: CPU1: patch_level=0x07030105
[    1.151482] microcode: CPU2: patch_level=0x07030105
[    1.151492] microcode: CPU3: patch_level=0x07030105
[    1.151568] microcode: Microcode Update Driver: v2.2.
[    1.151587] sched_clock: Marking stable (1150680436, 879048)->(1164878142, -13318658)
[    1.151956] registered taskstats version 1
[    1.151969] Loading compiled-in X.509 certificates
[    1.159665] Loaded X.509 cert 'Build time autogenerated kernel key: 12f49d339d879888f73b01bf952385086361e4d8'
[    1.159727] zswap: loaded using pool lzo/zbud
[    1.171677] Key type big_key registered
[    1.172415] PM:   Magic number: 3:805:368
[    1.172594] rtc_cmos 00:01: setting system clock to 2019-09-03T07:22:02 UTC (1567495322)
[    1.175525] Freeing unused decrypted memory: 2040K
[    1.176314] Freeing unused kernel image memory: 1608K
[    1.186412] Write protecting the kernel read-only data: 18432k
[    1.187420] Freeing unused kernel image memory: 2012K
[    1.187595] Freeing unused kernel image memory: 192K
[    1.206326] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.206336] Run /init as init process
[    1.282574] Linux agpgart interface v0.103
[    1.365907] [drm] radeon kernel modesetting enabled.
[    1.365945] vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[    1.366970] ATPX version 1, functions 0x00000003
[    1.367147] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
[    1.367150] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf07fffff
[    1.367152] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 5: 0xf0e00000 -> 0xf0e3ffff
[    1.367155] checking generic (e0000000 420000) vs hw (e0000000 10000000)
[    1.367156] fb0: switching to radeondrmfb from EFI VGA
[    1.367197] Console: switching to colour dummy device 80x25
[    1.367344] radeon 0000:00:01.0: vgaarb: deactivate vga console
[    1.367694] [drm] initializing kernel modesetting (MULLINS 0x1002:0x9851 0x103C:0x80CC 0x45).
[    1.367713] [drm] doorbell mmio base: 0xF0000000
[    1.367714] [drm] doorbell mmio size: 8388608
[    1.367750] ATOM BIOS: AMD
[    1.367858] radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    1.367861] radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[    1.367868] [drm] Detected VRAM RAM=1024M, BAR=256M
[    1.367869] [drm] RAM width 128bits DDR
[    1.368023] [TTM] Zone  kernel: Available graphics memory: 3539516 KiB
[    1.368024] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    1.368026] [TTM] Initializing pool allocator
[    1.368032] [TTM] Initializing DMA pool allocator
[    1.368065] [drm] radeon: 1024M of VRAM memory ready
[    1.368066] [drm] radeon: 2048M of GTT memory ready.
[    1.368080] [drm] Loading mullins Microcode
[    1.368262] [drm] Internal thermal controller without fan control
[    1.369167] [drm] radeon: dpm initialized
[    1.369316] [drm] Found UVD firmware Version: 1.64 Family ID: 9
[    1.371206] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[    1.371218] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    1.407747] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[    1.407936] radeon 0000:00:01.0: WB enabled
[    1.407964] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x(____ptrval____)
[    1.407967] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0x(____ptrval____)
[    1.407970] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0x(____ptrval____)
[    1.407972] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x(____ptrval____)
[    1.407975] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0x(____ptrval____)
[    1.408564] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0x(____ptrval____)
[    1.408793] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0x(____ptrval____)
[    1.408795] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0x(____ptrval____)
[    1.408800] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.408801] [drm] Driver supports precise vblank timestamp query.
[    1.408866] radeon 0000:00:01.0: radeon: using MSI.
[    1.408898] [drm] radeon: irq initialized.
[    1.411517] [drm] ring test on 0 succeeded in 2 usecs
[    1.411588] [drm] ring test on 1 succeeded in 2 usecs
[    1.411602] [drm] ring test on 2 succeeded in 2 usecs
[    1.411789] [drm] ring test on 3 succeeded in 4 usecs
[    1.411795] [drm] ring test on 4 succeeded in 3 usecs
[    1.437841] [drm] ring test on 5 succeeded in 1 usecs
[    1.437854] [drm] UVD initialized successfully.
[    1.548075] [drm] ring test on 6 succeeded in 12 usecs
[    1.548083] [drm] ring test on 7 succeeded in 2 usecs
[    1.548084] [drm] VCE initialized successfully.
[    1.549179] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.549320] [drm] ib test on ring 1 succeeded in 0 usecs
[    1.549455] [drm] ib test on ring 2 succeeded in 0 usecs
[    1.549594] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.549730] [drm] ib test on ring 4 succeeded in 0 usecs
[    2.057110] [drm] ib test on ring 5 succeeded
[    2.057682] [drm] ib test on ring 6 succeeded
[    2.058126] [drm] ib test on ring 7 succeeded
[    2.060023] [drm] radeon atom DIG backlight initialized
[    2.060220] [drm] Radeon Display Connectors
[    2.060222] [drm] Connector 0:
[    2.060223] [drm]   eDP-1
[    2.060225] [drm]   HPD1
[    2.060227] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    2.060228] [drm]   Encoders:
[    2.060229] [drm]     LCD1: INTERNAL_UNIPHY
[    2.060231] [drm] Connector 1:
[    2.060232] [drm]   HDMI-A-1
[    2.060233] [drm]   HPD2
[    2.060235] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[    2.060236] [drm]   Encoders:
[    2.060237] [drm]     DFP1: INTERNAL_UNIPHY
[    2.060238] [drm] Connector 2:
[    2.060239] [drm]   VGA-1
[    2.060241] [drm]   DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[    2.060242] [drm]   Encoders:
[    2.060243] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.136825] tsc: Refined TSC clocksource calibration: 2195.881 MHz
[    2.136842] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa6ffc1640, max_idle_ns: 440795239502 ns
[    2.136864] clocksource: Switched to clocksource tsc
[    2.418364] [drm] fb mappable at 0xE0722000
[    2.418368] [drm] vram apper at 0xE0000000
[    2.418369] [drm] size 4325376
[    2.418370] [drm] fb depth is 24
[    2.418371] [drm]    pitch is 5632
[    2.418541] fbcon: radeondrmfb (fb0) is primary device
[    2.921894] Console: switching to colour frame buffer device 170x48
[    2.926150] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    2.958708] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[    2.958848] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xd0000000 -> 0xdfffffff
[    2.958851] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0d00000 -> 0xf0d3ffff
[    2.958873] radeon 0000:01:00.0: enabling device (0002 -> 0003)
[    2.959232] [drm] initializing kernel modesetting (HAINAN 0x1002:0x6660 0x103C:0x80CC 0x83).
[    2.959264] vga_switcheroo: enabled
[    3.057876] ATOM BIOS: HP/Compal
[    3.057892] [drm] GPU not posted. posting now...
[    3.084017] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[    3.084020] radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[    3.084027] [drm] Detected VRAM RAM=2048M, BAR=256M
[    3.084029] [drm] RAM width 64bits DDR
[    3.084047] [drm] radeon: 2048M of VRAM memory ready
[    3.084049] [drm] radeon: 2048M of GTT memory ready.
[    3.084062] [drm] Loading hainan Microcode
[    3.084270] [drm] Internal thermal controller without fan control
[    3.093439] [drm] radeon: dpm initialized
[    3.093447] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    3.096277] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    3.539937] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[    3.540113] radeon 0000:01:00.0: WB enabled
[    3.540118] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x(____ptrval____)
[    3.540121] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x(____ptrval____)
[    3.540123] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x(____ptrval____)
[    3.540126] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x(____ptrval____)
[    3.540128] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x(____ptrval____)
[    3.540131] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.540132] [drm] Driver supports precise vblank timestamp query.
[    3.540134] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    3.540239] radeon 0000:01:00.0: radeon: using MSI.
[    3.540276] [drm] radeon: irq initialized.
[    3.955142] [drm] ring test on 0 succeeded in 1 usecs
[    3.955149] [drm] ring test on 1 succeeded in 1 usecs
[    3.955156] [drm] ring test on 2 succeeded in 1 usecs
[    3.955168] [drm] ring test on 3 succeeded in 4 usecs
[    3.955176] [drm] ring test on 4 succeeded in 4 usecs
[    3.955367] [drm] ib test on ring 0 succeeded in 0 usecs
[    3.955406] [drm] ib test on ring 1 succeeded in 0 usecs
[    3.955443] [drm] ib test on ring 2 succeeded in 0 usecs
[    3.955463] [drm] ib test on ring 3 succeeded in 0 usecs
[    3.955480] [drm] ib test on ring 4 succeeded in 0 usecs
[    3.955927] [drm] Radeon Display Connectors
[    3.957920] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
[    4.075462] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.096002] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.096094] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.101061] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.103274] ehci-pci: EHCI PCI platform driver
[    4.103615] ehci-pci 0000:00:12.0: EHCI Host Controller
[    4.103627] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[    4.103636] ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    4.103646] ehci-pci 0000:00:12.0: debug port 2
[    4.103714] ehci-pci 0000:00:12.0: irq 18, io mem 0xf0e6e000
[    4.112989] SCSI subsystem initialized
[    4.116837] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[    4.116986] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    4.116990] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.116993] usb usb1: Product: EHCI Host Controller
[    4.116996] usb usb1: Manufacturer: Linux 5.2.11-arch1-1-ARCH ehci_hcd
[    4.116999] usb usb1: SerialNumber: 0000:00:12.0
[    4.117277] hub 1-0:1.0: USB hub found
[    4.117295] hub 1-0:1.0: 2 ports detected
[    4.117857] ehci-pci 0000:00:13.0: EHCI Host Controller
[    4.117868] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[    4.117875] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    4.117885] ehci-pci 0000:00:13.0: debug port 2
[    4.117932] ehci-pci 0000:00:13.0: irq 18, io mem 0xf0e6d000
[    4.118226] sdhci: Secure Digital Host Controller Interface driver
[    4.118227] sdhci: Copyright(c) Pierre Ossman
[    4.126151] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[    4.127437] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[    4.130176] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
[    4.130308] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    4.130312] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.130314] usb usb2: Product: EHCI Host Controller
[    4.130317] usb usb2: Manufacturer: Linux 5.2.11-arch1-1-ARCH ehci_hcd
[    4.130319] usb usb2: SerialNumber: 0000:00:13.0
[    4.130572] hub 2-0:1.0: USB hub found
[    4.130588] hub 2-0:1.0: 2 ports detected
[    4.131453] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    4.131465] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[    4.131646] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[    4.132540] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    4.132544] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.132547] usb usb3: Product: xHCI Host Controller
[    4.132549] usb usb3: Manufacturer: Linux 5.2.11-arch1-1-ARCH xhci-hcd
[    4.132552] usb usb3: SerialNumber: 0000:00:10.0
[    4.133026] hub 3-0:1.0: USB hub found
[    4.133045] hub 3-0:1.0: 2 ports detected
[    4.135877] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    4.135885] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[    4.135894] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[    4.135951] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.136020] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
[    4.136024] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.136026] usb usb4: Product: xHCI Host Controller
[    4.136029] usb usb4: Manufacturer: Linux 5.2.11-arch1-1-ARCH xhci-hcd
[    4.136031] usb usb4: SerialNumber: 0000:00:10.0
[    4.136267] hub 4-0:1.0: USB hub found
[    4.136289] hub 4-0:1.0: 2 ports detected
[    4.137340] libata version 3.00 loaded.
[    4.145768] ahci 0000:00:11.0: version 3.0
[    4.146131] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    4.146135] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part 
[    4.149271] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    4.152677] scsi host0: ahci
[    4.153583] scsi host1: ahci
[    4.153715] ata1: SATA max UDMA/133 abar m1024@0xf0e6f000 port 0xf0e6f100 irq 38
[    4.153718] ata2: SATA max UDMA/133 abar m1024@0xf0e6f000 port 0xf0e6f180 irq 38
[    4.446998] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    4.460260] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    4.594056] usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
[    4.594060] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.594465] hub 1-1:1.0: USB hub found
[    4.594552] hub 1-1:1.0: 4 ports detected
[    4.607399] usb 2-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
[    4.607403] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.607816] hub 2-1:1.0: USB hub found
[    4.607888] hub 2-1:1.0: 4 ports detected
[    4.620331] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.620357] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.622117] ata1.00: supports DRM functions and may not be fully accessible
[    4.622879] ata1.00: disabling queued TRIM support
[    4.622882] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT03B6Q, max UDMA/133
[    4.622884] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    4.623582] ata2.00: ATAPI: hp       DVDRW  GUD0N, PD00, max UDMA/133
[    4.624672] ata1.00: supports DRM functions and may not be fully accessible
[    4.625252] ata1.00: disabling queued TRIM support
[    4.625649] ata2.00: configured for UDMA/133
[    4.626720] ata1.00: configured for UDMA/133
[    4.627071] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  3B6Q PQ: 0 ANSI: 5
[    4.630688] scsi 1:0:0:0: CD-ROM            hp       DVDRW  GUD0N     PD00 PQ: 0 ANSI: 5
[    4.677010] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    4.677042] sd 0:0:0:0: [sda] Write Protect is off
[    4.677046] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.677092] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.679100]  sda: sda1 sda2
[    4.680759] sd 0:0:0:0: [sda] supports TCG Opal
[    4.680762] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.713788] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.713793] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.714182] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.886923] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[    4.890278] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[    4.971022] random: fast init done
[    5.005380] usb 1-1.4: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
[    5.005384] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.026881] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=57d6, bcdDevice= 0.03
[    5.026902] usb 2-1.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    5.026905] usb 2-1.1: Product: HP Truevision HD
[    5.026907] usb 2-1.1: Manufacturer: Generic
[    5.026909] usb 2-1.1: SerialNumber: DEWKP019I9UDUT
[    5.503920] F2FS-fs (sda2): Mounted with checkpoint version = 107ebc50
[    5.669486] systemd[1]: systemd 242.84-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    5.683850] systemd[1]: Detected architecture x86-64.
[    5.688393] systemd[1]: Set hostname to <Lenovo>.
[    5.879974] random: systemd: uninitialized urandom read (16 bytes read)
[    5.886426] systemd[1]: Listening on Process Core Dump Socket.
[    5.886655] random: systemd: uninitialized urandom read (16 bytes read)
[    5.886947] systemd[1]: Listening on Journal Socket.
[    5.887151] random: systemd: uninitialized urandom read (16 bytes read)
[    5.890204] systemd[1]: Mounting Kernel Debug File System...
[    5.892034] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.892698] systemd[1]: Listening on udev Control Socket.
[    5.893466] systemd[1]: Created slice User and Session Slice.
[    5.893677] systemd[1]: Reached target Login Prompts.
[    5.933988] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.934058] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    6.650295] audit: type=1130 audit(1567495327.974:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.667775] systemd-journald[271]: Received request to flush runtime journal from PID 1
[    6.781975] audit: type=1130 audit(1567495328.104:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.814802] audit: type=1130 audit(1567495328.137:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.854253] acpi_cpufreq: overriding BIOS provided _PSD data
[    6.857325] input: HP Wireless hotkeys as /devices/virtual/input/input7
[    6.949902] tpm_crb MSFT0101:00: can't request region for resource [mem 0x8fb72000-0x8fc71fff]
[    6.950281] wmi_bus wmi_bus-PNP0C14:00: WQBJ data block query control method not found
[    6.951550] tpm_crb: probe of MSFT0101:00 failed with error -16
[    6.953676] ACPI: AC Adapter [ACAD] (off-line)
[    6.966150] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB.PCI0.SMBS.SMB0) (20190509/utaddress-204)
[    6.966164] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.005075] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    7.013494] libphy: r8169: probed
[    7.013841] r8169 0000:03:00.0 eth0: RTL8106e, 70:5a:0f:c1:c9:56, XID 449, IRQ 40
[    7.014163] ccp 0000:00:08.0: 4 command queues available
[    7.015227] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    7.015402] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    7.015408] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[    7.021540] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    7.044022] ccp 0000:00:08.0: ccp enabled
[    7.122661] cryptd: max_cpu_qlen set to 1000
[    7.234853] media: Linux media interface: v0.10
[    7.339815] AVX version of gcm_enc/dec engaged.
[    7.339819] AES CTR mode by8 optimization enabled
[    7.342066] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[    7.342535] audit: type=1130 audit(1567495328.664:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.459203] videodev: Linux video capture interface: v2.00
[    7.461764] audit: type=1130 audit(1567495328.784:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-C304\x2d7822 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.462073] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.500544] battery: ACPI: Battery Slot [BAT1] (battery present)
[    7.501118] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.502328] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    7.502335] cfg80211: failed to load regulatory.db
[    7.507011] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input11
[    7.507275] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    7.534938] Bluetooth: Core ver 2.22
[    7.535015] NET: Registered protocol family 31
[    7.535017] Bluetooth: HCI device and connection manager initialized
[    7.535026] Bluetooth: HCI socket layer initialized
[    7.535031] Bluetooth: L2CAP socket layer initialized
[    7.535041] Bluetooth: SCO socket layer initialized
[    7.536603] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    7.536609] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.536613] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    7.536616] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    7.536618] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    7.536622] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x19
[    7.536625] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[    7.554637] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[    7.554821] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[    7.554960] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[    7.583532] pktcdvd: pktcdvd0: writer mapped to sr0
[    7.693790] usbcore: registered new interface driver btusb
[    7.707672] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[    7.712721] Bluetooth: hci0: Device revision is 5
[    7.712727] Bluetooth: hci0: Secure boot is enabled
[    7.712729] Bluetooth: hci0: OTP lock is disabled
[    7.712731] Bluetooth: hci0: API lock is disabled
[    7.712736] Bluetooth: hci0: Debug lock is disabled
[    7.712739] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    7.715691] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[    7.747969] Intel(R) Wireless WiFi driver for Linux
[    7.747973] Copyright(c) 2003- 2015 Intel Corporation
[    7.756844] audit: type=1130 audit(1567495329.077:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.757522] iwlwifi 0000:02:00.0: Found debug destination: EXTERNAL_DRAM
[    7.757530] iwlwifi 0000:02:00.0: Found debug configuration: 0
[    7.758983] uvcvideo: Found UVC 1.00 device HP Truevision HD (0bda:57d6)
[    7.759443] iwlwifi 0000:02:00.0: loaded firmware version 36.77d01142.0 op_mode iwlmvm
[    7.799075] uvcvideo 2-1.1:1.0: Entity type for entity Extension 4 was not initialized!
[    7.799082] uvcvideo 2-1.1:1.0: Entity type for entity Processing 2 was not initialized!
[    7.799086] uvcvideo 2-1.1:1.0: Entity type for entity Camera 1 was not initialized!
[    7.799280] input: HP Truevision HD: HP Truevision as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input15
[    7.800979] usbcore: registered new interface driver uvcvideo
[    7.800982] USB Video Class driver (1.1.1)
[    7.821663] audit: type=1130 audit(1567495329.144:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.823882] audit: type=1127 audit(1567495329.147:9): pid=430 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[    7.844101] audit: type=1130 audit(1567495329.167:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.979964] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[    7.987959] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    7.989509] iwlwifi 0000:02:00.0: Allocated 0x00400000 bytes for firmware monitor.
[    7.997126] Bluetooth: hci0: Failed to send firmware data (-38)
[    8.005217] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[    8.034361] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[    8.034377] psmouse serio1: synaptics: Your touchpad (PNP: SYN1efc PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    8.065745] iwlwifi 0000:02:00.0: base HW address: 34:13:e8:3a:26:c2
[    8.091326] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3127, fw id: 8526786
[    8.127784] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[    8.190730] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    8.191422] thermal thermal_zone2: failed to read out thermal zone (-61)
[    8.198744] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    8.222317] audit: type=1130 audit(1567495329.544:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.245190] random: crng init done
[    8.245195] random: 7 urandom warning(s) missed due to ratelimiting
[    8.245446] hp_wmi: query 0xd returned error 0x5
[    8.245632] input: HP WMI hotkeys as /devices/virtual/input/input10
[    8.515438] mousedev: PS/2 mouse device common for all mice
[    8.540129] [drm] amdgpu kernel modesetting enabled.
[    8.550202] vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[    8.552180] ATPX version 1, functions 0x00000003
[    8.553714] CRAT table not found
[    8.553724] Virtual CRAT table created for CPU
[    8.553727] Parsing CRAT table with 1 nodes
[    8.553732] Creating topology SYSFS entries
[    8.553766] Topology: Add CPU node
[    8.553767] Finished initializing topology
[    8.650279] kvm: Nested Virtualization enabled
[    8.650289] kvm: Nested Paging enabled
[    8.678286] MCE: In-kernel MCE decoding enabled.
[    8.729962] EDAC amd64: Node 0: DRAM ECC disabled.
[    8.729967] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    8.777675] EDAC amd64: Node 0: DRAM ECC disabled.
[    8.777680] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    8.807776] EDAC amd64: Node 0: DRAM ECC disabled.
[    8.807781] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    8.841370] EDAC amd64: Node 0: DRAM ECC disabled.
[    8.841375] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    9.136293] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    9.136298] Bluetooth: BNEP filters: protocol multicast
[    9.136307] Bluetooth: BNEP socket layer initialized
[   10.173403] Generic PHY r8169-300:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[   10.431186] r8169 0000:03:00.0 enp3s0: Link is Down
[   10.444483] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[   10.599881] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[   10.687694] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[   10.717270] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[   10.872698] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[   10.960475] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[   12.854555] kauditd_printk_skb: 14 callbacks suppressed
[   12.854566] audit: type=1130 audit(1567495334.177:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wpa_supplicant comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.979444] audit: type=1130 audit(1567495334.300:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.984840] audit: type=1130 audit(1567495334.307:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=accounts-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.993547] Adding 524284k swap on /var/lib/systemd-swap/swapfc/1.  Priority:-2 extents:34 across:788476k SSFS
[   13.230902] audit: type=1131 audit(1567495334.554:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.306584] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[   13.755590] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[   13.755735] radeon 0000:01:00.0: WB enabled
[   13.755740] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000486a835d
[   13.755743] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x000000006321a4f0
[   13.755746] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000cd33c278
[   13.755749] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x000000009260d838
[   13.755751] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x00000000858a18ab
[   14.171585] [drm] ring test on 0 succeeded in 1 usecs
[   14.171595] [drm] ring test on 1 succeeded in 1 usecs
[   14.171602] [drm] ring test on 2 succeeded in 1 usecs
[   14.171616] [drm] ring test on 3 succeeded in 5 usecs
[   14.171625] [drm] ring test on 4 succeeded in 4 usecs
[   14.171705] [drm] ib test on ring 0 succeeded in 0 usecs
[   14.171747] [drm] ib test on ring 1 succeeded in 0 usecs
[   14.171788] [drm] ib test on ring 2 succeeded in 0 usecs
[   14.171809] [drm] ib test on ring 3 succeeded in 0 usecs
[   14.171826] [drm] ib test on ring 4 succeeded in 0 usecs
[   15.153537] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[   15.887213] audit: type=1130 audit(1567495337.210:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.905232] audit: type=1006 audit(1567495337.227:31): pid=633 uid=0 old-auid=4294967295 auid=620 tty=(none) old-ses=4294967295 ses=1 res=1
[   16.060221] audit: type=1130 audit(1567495337.380:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.077757] fuse: init (API version 7.31)
[   17.740632] audit: type=1130 audit(1567495339.064:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.019382] audit: type=1131 audit(1567495341.340:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   21.423655] audit: type=1006 audit(1567495342.747:35): pid=728 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   21.469368] audit: type=1130 audit(1567495342.790:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   21.487309] audit: type=1006 audit(1567495342.810:37): pid=763 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[   21.642286] audit: type=1130 audit(1567495342.964:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   21.678966] audit: type=1112 audit(1567495343.000:39): pid=728 uid=0 auid=1000 ses=2 msg='op=login id=1000 exe="/usr/bin/lightdm" hostname=Lenovo addr=? terminal=/dev/tty7 res=success'
[   22.421374] wlp2s0: authenticate with 8c:15:c7:04:4b:68
[   22.437466] wlp2s0: send auth to 8c:15:c7:04:4b:68 (try 1/3)
[   22.443958] wlp2s0: authenticated
[   22.447124] wlp2s0: associate with 8c:15:c7:04:4b:68 (try 1/3)
[   22.448446] wlp2s0: RX AssocResp from 8c:15:c7:04:4b:68 (capab=0x11 status=0 aid=3)
[   22.450790] wlp2s0: associated
[   22.591316] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   22.592376] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 8c:15:c7:04:4b:68
[   22.792627] audit: type=1130 audit(1567495344.114:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   23.413711] audit: type=1130 audit(1567495344.737:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   31.778610] audit: type=1131 audit(1567495353.100:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   31.865687] audit: type=1131 audit(1567495353.187:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   33.017466] audit: type=1131 audit(1567495354.337:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   40.085023] audit: type=1131 audit(1567495361.408:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

Regardless, I realised that if it doesn't load on boot (for whatever reason), reinserting the module makes it work...

Last edited by anubium (2019-09-03 08:42:35)

Offline

Board footer

Powered by FluxBB