You are not logged in.

Pages: 1

#1 2019-09-17 18:53:52

RAK_V_LiNux'e
Banned
Registered: 2018-04-09
Posts: 36

[SOLVED] How do i transfer files to old or old-like phones

i just got this:
http://www.maxcom.gr/en/mm917-2/
and want to transfer a photo and music on it.
i just know that ~it works on java and that it doesn't work with mtp (of course).

It is connected throgh a usb to micro usb port (standart)
here is lsusb

Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 2357:010c TP-Link TL-WN722N v2
Bus 001 Device 002: ID 0ac8:c40a Z-Star Microelectronics Corp. A4 TECH USB2.0 PC Camera J
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 045e:028e Microsoft Corp. Xbox360 Controller
Bus 003 Device 002: ID 18f8:0f97 [Maxxter] USB OPTICAL MOUSE
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

TP-Link TL is my wifi plug

Last edited by RAK_V_LiNux'e (2019-09-18 12:22:24)

Offline

#2 2019-09-17 20:11:01

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,347

Re: [SOLVED] How do i transfer files to old or old-like phones

Please post the dmesg output when attaching it, but old™ feature-phones usually had, at best, some proprietary protocol for data upload that was exclusively supported by some vendor software shipped w/ the phone.

Edit: forget about the verbose lsusb, apparently the device doesn't show up at all?

Last edited by seth (2019-09-17 20:12:10)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2019-09-17 20:25:04

xerxes_
Member
Registered: 2018-04-29
Posts: 1,076

Re: [SOLVED] How do i transfer files to old or old-like phones

Maybe you have Bluetooth in your computer, so it would be easier / faster to connect through it.

Offline

#4 2019-09-18 03:58:18

RAK_V_LiNux'e
Banned
Registered: 2018-04-09
Posts: 36

Re: [SOLVED] How do i transfer files to old or old-like phones

i don't have bluetooth on my pc hmm
dmesg:

[    0.000000] Linux version 5.2.13-arch1-1-ARCH (builduser@heftig-49962) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Fri Sep 6 17:52:33 UTC 2019
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=408bb552-bab9-4e56-bc54-9ae92d28c4c5 rw loglevel=3 quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] random: get_random_u32 called from bsp_init_amd+0x278/0x330 with crng_init=0
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cffaffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cffb0000-0x00000000cffbdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cffbe000-0x00000000cffdffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: BIOSTAR Group A960D+V2/A960D+V2, BIOS 080015  11/25/2015
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000230000000 aka 8960M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xcffb0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
[    0.000000] check: Scanning 1 areas for low memory corruption
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x151201000, 0x151201fff] PGTABLE
[    0.000000] BRK [0x151202000, 0x151202fff] PGTABLE
[    0.000000] BRK [0x151203000, 0x151203fff] PGTABLE
[    0.000000] BRK [0x151204000, 0x151204fff] PGTABLE
[    0.000000] BRK [0x151205000, 0x151205fff] PGTABLE
[    0.000000] BRK [0x151206000, 0x151206fff] PGTABLE
[    0.000000] BRK [0x151207000, 0x151207fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36e3d000-0x37715fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F96C0 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000CFFB0000 000040 (v01 112515 RSDT1022 20151125 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000CFFB0200 000084 (v01 112515 FACP1022 20151125 MSFT 00000097)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20190509/tbfadt-615)
[    0.000000] ACPI: DSDT 0x00000000CFFB04C0 009D15 (v01 78LRP  78LRPB25 00000030 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000CFFBE000 000040
[    0.000000] ACPI: APIC 0x00000000CFFB0390 00008C (v01 112515 APIC1022 20151125 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000CFFB0420 00003C (v01 112515 OEMMCFG  20151125 MSFT 00000097)
[    0.000000] ACPI: MSDM 0x00000000CFFB0460 000055 (v03 112515 MSDM1022 20151125 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000CFFBE040 000084 (v01 112515 OEMB1022 20151125 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CFFBA1E0 000038 (v01 112515 OEMHPET  20151125 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000CFFBA220 000B9C (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21fffc000-0x21fffffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cffaffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021fffffff]
[    0.000000] Zeroed struct page in unavailable ranges: 178 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff]
[    0.000000] On node 0 totalpages: 2031438
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13247 pages used for memmap
[    0.000000]   DMA32 zone: 847792 pages, LIFO batch:63
[    0.000000]   Normal zone: 18432 pages used for memmap
[    0.000000]   Normal zone: 1179648 pages, LIFO batch:63
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 20, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcffb0000-0xcffbdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcffbe000-0xcffdffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] [mem 0xd0000000-0xffbfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1999674
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=408bb552-bab9-4e56-bc54-9ae92d28c4c5 rw loglevel=3 quiet
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[    0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[    0.000000] Memory: 7827616K/8125752K available (12291K kernel code, 1319K rwdata, 3904K rodata, 1608K init, 3616K bss, 298136K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 37399 entries in 147 pages
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.000000] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] printk: console [tty0] enabled
[    0.000000] ACPI: Core revision 20190509
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.019999] tsc: PIT calibration matches HPET. 1 loops
[    0.019999] tsc: Detected 3800.001 MHz processor
[    0.000003] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d8cb0e20f4, max_idle_ns: 881590468932 ns
[    0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 7603.66 BogoMIPS (lpj=12666670)
[    0.000008] pid_max: default: 32768 minimum: 301
[    0.000039] LSM: Security Framework initializing
[    0.000042] Yama: becoming mindful.
[    0.001738] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.003118] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003160] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.003191] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.003372] *** VALIDATE proc ***
[    0.003430] *** VALIDATE cgroup1 ***
[    0.003431] *** VALIDATE cgroup2 ***
[    0.003472] LVT offset 1 assigned for vector 0xf9
[    0.003476] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.003476] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.003478] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.003479] Spectre V2 : Mitigation: Full AMD retpoline
[    0.003479] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.003482] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.003482] Spectre V2 : User space: Vulnerable
[    0.003483] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.003646] Freeing SMP alternatives memory: 32K
[    0.116705] smpboot: CPU0: AMD FX(tm)-4300 Quad-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[    0.136681] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.136686] ... version:                0
[    0.136686] ... bit width:              48
[    0.136687] ... generic registers:      6
[    0.136687] ... value mask:             0000ffffffffffff
[    0.136688] ... max period:             00007fffffffffff
[    0.136689] ... fixed-purpose events:   0
[    0.136689] ... event mask:             000000000000003f
[    0.143344] rcu: Hierarchical SRCU implementation.
[    0.166688] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.173351] smp: Bringing up secondary CPUs ...
[    0.213356] x86: Booting SMP configuration:
[    0.213357] .... node  #0, CPUs:      #1 #2 #3
[    0.302386] smp: Brought up 1 node, 4 CPUs
[    0.302386] smpboot: Max logical packages: 2
[    0.302386] smpboot: Total of 4 processors activated (30412.67 BogoMIPS)
[    0.303656] devtmpfs: initialized
[    0.303656] x86/mm: Memory block size: 128MB
[    0.304122] PM: Registering ACPI NVS region [mem 0xcffbe000-0xcffdffff] (139264 bytes)
[    0.306687] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.306687] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.306762] pinctrl core: initialized pinctrl subsystem
[    0.306848] PM: RTC time: 03:49:32, date: 2019-09-18
[    0.306975] NET: Registered protocol family 16
[    0.307049] audit: initializing netlink subsys (disabled)
[    0.307056] audit: type=2000 audit(1568778572.326:1): state=initialized audit_enabled=0 res=1
[    0.307056] cpuidle: using governor ladder
[    0.310013] cpuidle: using governor menu
[    0.310464] ACPI: bus type PCI registered
[    0.310464] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.310464] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.310464] PCI: not using MMCONFIG
[    0.310464] PCI: Using configuration type 1 for base access
[    0.310464] PCI: Using configuration type 1 for extended access
[    0.310464] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.310464] mtrr: probably your BIOS does not setup all CPUs.
[    0.310464] mtrr: corrected configuration.
[    0.310885] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.310885] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.313449] ACPI: Added _OSI(Module Device)
[    0.313450] ACPI: Added _OSI(Processor Device)
[    0.313451] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.313452] ACPI: Added _OSI(Processor Aggregator Device)
[    0.313452] ACPI: Added _OSI(Linux-Dell-Video)
[    0.313453] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.313454] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.323019] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.324477] ACPI: Interpreter enabled
[    0.324477] ACPI: (supports S0 S1 S4 S5)
[    0.324477] ACPI: Using IOAPIC for interrupt routing
[    0.324477] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.325257] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.325270] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.325657] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.333862] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.333868] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.334818] PCI host bridge to bus 0000:00
[    0.334820] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.334821] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.334823] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.334824] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.334825] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff window]
[    0.334826] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[    0.334828] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.334837] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[    0.334850] pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
[    0.334850] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
[    0.334850] pci 0000:00:07.0: enabling Extended Tags
[    0.334850] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.334850] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[    0.334850] pci 0000:00:11.0: reg 0x10: [io  0xc000-0xc007]
[    0.334850] pci 0000:00:11.0: reg 0x14: [io  0xb000-0xb003]
[    0.334850] pci 0000:00:11.0: reg 0x18: [io  0xa000-0xa007]
[    0.334850] pci 0000:00:11.0: reg 0x1c: [io  0x9000-0x9003]
[    0.334850] pci 0000:00:11.0: reg 0x20: [io  0x8000-0x800f]
[    0.334850] pci 0000:00:11.0: reg 0x24: [mem 0xfe8ffc00-0xfe8fffff]
[    0.334850] pci 0000:00:11.0: set SATA to AHCI mode
[    0.334850] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.334850] pci 0000:00:12.0: reg 0x10: [mem 0xfe8fe000-0xfe8fefff]
[    0.334850] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[    0.334850] pci 0000:00:12.1: reg 0x10: [mem 0xfe8fd000-0xfe8fdfff]
[    0.334850] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.334850] pci 0000:00:12.2: reg 0x10: [mem 0xfe8ff800-0xfe8ff8ff]
[    0.334850] pci 0000:00:12.2: supports D1 D2
[    0.334850] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.334850] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.334850] pci 0000:00:13.0: reg 0x10: [mem 0xfe8fc000-0xfe8fcfff]
[    0.334850] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[    0.334850] pci 0000:00:13.1: reg 0x10: [mem 0xfe8fb000-0xfe8fbfff]
[    0.334850] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.334850] pci 0000:00:13.2: reg 0x10: [mem 0xfe8ff400-0xfe8ff4ff]
[    0.334856] pci 0000:00:13.2: supports D1 D2
[    0.334857] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.334950] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.335116] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.335135] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.335144] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.335153] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.335161] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.335171] pci 0000:00:14.1: reg 0x20: [io  0xff00-0xff0f]
[    0.335192] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.335194] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.335195] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.335196] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.335298] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.335322] pci 0000:00:14.2: reg 0x10: [mem 0xfe8f4000-0xfe8f7fff 64bit]
[    0.335390] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.335473] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.335619] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.335739] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.335756] pci 0000:00:14.5: reg 0x10: [mem 0xfe8fa000-0xfe8fafff]
[    0.335891] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.335970] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.336045] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.336119] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.336196] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.336270] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.336361] pci_bus 0000:01: extended config space not accessible
[    0.336395] pci 0000:01:05.0: [1002:9714] type 00 class 0x030000
[    0.336402] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[    0.336405] pci 0000:01:05.0: reg 0x14: [io  0xd000-0xd0ff]
[    0.336409] pci 0000:01:05.0: reg 0x18: [mem 0xfeaf0000-0xfeafffff]
[    0.336418] pci 0000:01:05.0: reg 0x24: [mem 0xfe900000-0xfe9fffff]
[    0.336437] pci 0000:01:05.0: supports D1 D2
[    0.336504] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.336507] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.336509] pci 0000:00:01.0:   bridge window [mem 0xfe900000-0xfeafffff]
[    0.336511] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.336548] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.336569] pci 0000:02:00.0: reg 0x10: [io  0xe800-0xe8ff]
[    0.336701] pci 0000:02:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit]
[    0.336714] pci 0000:02:00.0: reg 0x20: [mem 0xfdffc000-0xfdffffff 64bit pref]
[    0.336790] pci 0000:02:00.0: supports D1 D2
[    0.336791] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.336881] pci 0000:00:07.0: PCI bridge to [bus 02]
[    0.336884] pci 0000:00:07.0:   bridge window [io  0xe000-0xefff]
[    0.336885] pci 0000:00:07.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.336888] pci 0000:00:07.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.336899] pci_bus 0000:03: extended config space not accessible
[    0.336959] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[    0.336967] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.336968] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.336969] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.336970] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.336972] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xdfffffff window] (subtractive decode)
[    0.336973] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[    0.337805] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[    0.337861] ACPI: PCI Interrupt Link [LNKB] (IRQs *4 7 10 11 12 14 15)
[    0.337914] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
[    0.337968] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[    0.338022] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.338075] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.338129] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *9 10 11 12 14 15)
[    0.338182] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.340019] pci 0000:01:05.0: vgaarb: setting as boot VGA device
[    0.340019] pci 0000:01:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.340019] pci 0000:01:05.0: vgaarb: bridge control possible
[    0.340019] vgaarb: loaded
[    0.340162] ACPI: bus type USB registered
[    0.340173] usbcore: registered new interface driver usbfs
[    0.340181] usbcore: registered new interface driver hub
[    0.340201] usbcore: registered new device driver usb
[    0.340219] pps_core: LinuxPPS API ver. 1 registered
[    0.340220] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.340222] PTP clock support registered
[    0.340229] EDAC MC: Ver: 3.0.0
[    0.340298] PCI: Using ACPI for IRQ routing
[    0.348929] PCI: pci_cache_line_size set to 64 bytes
[    0.348976] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[    0.348978] e820: reserve RAM buffer [mem 0xcffb0000-0xcfffffff]
[    0.349082] NetLabel: Initializing
[    0.349082] NetLabel:  domain hash size = 128
[    0.349083] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.349095] NetLabel:  unlabeled traffic allowed by default
[    0.350048] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.350050] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.351073] clocksource: Switched to clocksource tsc-early
[    0.363865] VFS: Disk quotas dquot_6.6.0
[    0.363881] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.363907] *** VALIDATE hugetlbfs ***
[    0.363954] pnp: PnP ACPI init
[    0.364148] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.364257] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.364653] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.364655] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.364658] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.364904] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.364906] system 00:03: [io  0x040b] has been reserved
[    0.364907] system 00:03: [io  0x04d6] has been reserved
[    0.364908] system 00:03: [io  0x0c00-0x0c01] has been reserved
[    0.364910] system 00:03: [io  0x0c14] has been reserved
[    0.364911] system 00:03: [io  0x0c50-0x0c51] has been reserved
[    0.364912] system 00:03: [io  0x0c52] has been reserved
[    0.364913] system 00:03: [io  0x0c6c] has been reserved
[    0.364915] system 00:03: [io  0x0c6f] has been reserved
[    0.364916] system 00:03: [io  0x0cd0-0x0cd1] has been reserved
[    0.364917] system 00:03: [io  0x0cd2-0x0cd3] has been reserved
[    0.364918] system 00:03: [io  0x0cd4-0x0cd5] has been reserved
[    0.364920] system 00:03: [io  0x0cd6-0x0cd7] has been reserved
[    0.364921] system 00:03: [io  0x0cd8-0x0cdf] has been reserved
[    0.364922] system 00:03: [io  0x0800-0x089f] has been reserved
[    0.364923] system 00:03: [io  0x0b00-0x0b0f] has been reserved
[    0.364925] system 00:03: [io  0x0b20-0x0b3f] has been reserved
[    0.364926] system 00:03: [io  0x0900-0x090f] has been reserved
[    0.364927] system 00:03: [io  0x0910-0x091f] has been reserved
[    0.364929] system 00:03: [io  0xfe00-0xfefe] has been reserved
[    0.364930] system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.364932] system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.364935] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.364984] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.365242] system 00:05: [io  0x0e00-0x0e0f] has been reserved
[    0.365244] system 00:05: [io  0x0e80-0x0e8f] has been reserved
[    0.365245] system 00:05: [io  0x0f40-0x0f4f] has been reserved
[    0.365246] system 00:05: [io  0x0a30-0x0a3f] has been reserved
[    0.365250] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.365313] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.365316] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.365671] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.365673] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.365674] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.365676] system 00:07: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.365677] system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.365681] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.365799] pnp: PnP ACPI: found 8 devices
[    0.371901] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.371910] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.371912] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.371915] pci 0000:00:01.0:   bridge window [mem 0xfe900000-0xfeafffff]
[    0.371917] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.371919] pci 0000:00:07.0: PCI bridge to [bus 02]
[    0.371921] pci 0000:00:07.0:   bridge window [io  0xe000-0xefff]
[    0.371923] pci 0000:00:07.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.371925] pci 0000:00:07.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.371928] pci 0000:00:14.4: PCI bridge to [bus 03]
[    0.371939] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.371941] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.371942] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.371943] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.371944] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff window]
[    0.371945] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
[    0.371946] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.371947] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
[    0.371949] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.371950] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.371951] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.371952] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.371953] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.371954] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.371955] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.371956] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.371957] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff window]
[    0.371958] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff window]
[    0.372025] NET: Registered protocol family 2
[    0.372162] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.372194] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.372352] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.372575] TCP: Hash tables configured (established 65536 bind 65536)
[    0.372622] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.372655] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.372748] NET: Registered protocol family 1
[    0.372753] NET: Registered protocol family 44
[    0.372757] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    1.046961] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x63a took 658385 usecs
[    1.076955] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x63a took 29284 usecs
[    1.106951] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x63a took 29092 usecs
[    1.136951] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x63a took 29289 usecs
[    1.166949] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x63a took 29084 usecs
[    1.166969] pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.166973] PCI: CLS 64 bytes, default 64
[    1.167010] Trying to unpack rootfs image as initramfs...
[    1.286069] Freeing initrd memory: 9060K
[    1.286079] PCI-DMA: Disabling AGP.
[    1.286140] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    1.286141] PCI-DMA: using GART IOMMU.
[    1.286143] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.288482] amd_uncore: AMD NB counters detected
[    1.288576] LVT offset 0 assigned for vector 0x400
[    1.288611] perf: AMD IBS detected (0x000000ff)
[    1.288659] check: Scanning for low memory corruption every 60 seconds
[    1.289258] Initialise system trusted keyrings
[    1.289266] Key type blacklist registered
[    1.289332] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    1.290807] zbud: loaded
[    1.292389] Key type asymmetric registered
[    1.292391] Asymmetric key parser 'x509' registered
[    1.292399] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.292449] io scheduler mq-deadline registered
[    1.292451] io scheduler kyber registered
[    1.292500] io scheduler bfq registered
[    1.292936] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.293009] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[    1.293009] vesafb: scrolling: redraw
[    1.293011] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.293023] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 5824k, total 5824k
[    1.293065] fbcon: Deferring console take-over
[    1.293066] fb0: VESA VGA frame buffer device
[    1.293125] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.294342] ACPI: Power Button [PWRB]
[    1.294393] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.300165] ACPI: Power Button [PWRF]
[    1.301674] thermal LNXTHERM:00: registered as thermal_zone0
[    1.301675] ACPI: Thermal Zone [THRM] (17 C)
[    1.301815] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.302229] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.302229] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    1.302715] usbcore: registered new interface driver usbserial_generic
[    1.302720] usbserial: USB Serial support registered for generic
[    1.302738] rtc_cmos 00:01: RTC can wake from S4
[    1.302866] rtc_cmos 00:01: registered as rtc0
[    1.302883] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.302968] ledtrig-cpu: registered to indicate activity on CPUs
[    1.303007] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
[    1.303175] NET: Registered protocol family 10
[    1.309332] Segment Routing with IPv6
[    1.309353] NET: Registered protocol family 17
[    1.309586] mce: Using 7 MCE banks
[    1.309600] RAS: Correctable Errors collector initialized.
[    1.309603] microcode: microcode updated early to new patch_level=0x06000852
[    1.309633] microcode: CPU0: patch_level=0x06000852
[    1.309637] microcode: CPU1: patch_level=0x06000852
[    1.309645] microcode: CPU2: patch_level=0x06000852
[    1.309651] microcode: CPU3: patch_level=0x06000852
[    1.309684] microcode: Microcode Update Driver: v2.2.
[    1.309693] sched_clock: Marking stable (1329674971, -19994947)->(1315345046, -5665022)
[    1.309890] registered taskstats version 1
[    1.309897] Loading compiled-in X.509 certificates
[    1.313492] Loaded X.509 cert 'Build time autogenerated kernel key: ded63ef640ee46d1315aff80c529b7c655cac428'
[    1.313515] zswap: loaded using pool lzo/zbud
[    1.319115] Key type big_key registered
[    1.319434] PM:   Magic number: 3:474:816
[    1.319512] rtc_cmos 00:01: setting system clock to 2019-09-18T03:49:33 UTC (1568778573)
[    1.321353] Freeing unused decrypted memory: 2040K
[    1.321794] Freeing unused kernel image memory: 1608K
[    1.330179] Write protecting the kernel read-only data: 18432k
[    1.330798] Freeing unused kernel image memory: 2012K
[    1.330874] Freeing unused kernel image memory: 192K
[    1.340527] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.340533] Run /init as init process
[    1.355347] fbcon: Taking over console
[    1.355444] Console: switching to colour frame buffer device 175x65
[    1.577905] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.577907] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.578165] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.579367] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.581908] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.581909] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    1.582943] ehci-pci: EHCI PCI platform driver
[    1.583202] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.583208] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.583213] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.583223] ehci-pci 0000:00:12.2: debug port 1
[    1.583271] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe8ff800
[    1.586659] SCSI subsystem initialized
[    1.593970] libata version 3.00 loaded.
[    1.594308] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.594371] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    1.594373] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.594374] usb usb1: Product: EHCI Host Controller
[    1.594375] usb usb1: Manufacturer: Linux 5.2.13-arch1-1-ARCH ehci_hcd
[    1.594376] usb usb1: SerialNumber: 0000:00:12.2
[    1.595928] hub 1-0:1.0: USB hub found
[    1.595936] hub 1-0:1.0: 6 ports detected
[    1.596338] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.596344] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.596348] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.596358] ehci-pci 0000:00:13.2: debug port 1
[    1.596403] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe8ff400
[    1.598519] ahci 0000:00:11.0: version 3.0
[    1.598791] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.598794] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
[    1.603413] scsi host0: ahci
[    1.606965] scsi host2: pata_atiixp
[    1.607665] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.607741] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    1.607742] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.607744] usb usb2: Product: EHCI Host Controller
[    1.607745] usb usb2: Manufacturer: Linux 5.2.13-arch1-1-ARCH ehci_hcd
[    1.607746] usb usb2: SerialNumber: 0000:00:13.2
[    1.607857] hub 2-0:1.0: USB hub found
[    1.607865] hub 2-0:1.0: 6 ports detected
[    1.610056] ohci-pci: OHCI PCI platform driver
[    1.610236] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.610244] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.610277] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe8fe000
[    1.610289] scsi host3: pata_atiixp
[    1.610344] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.610346] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.610996] scsi host1: ahci
[    1.611140] scsi host4: ahci
[    1.611282] scsi host5: ahci
[    1.611358] ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 25
[    1.611360] ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 25
[    1.611362] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 25
[    1.611364] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 25
[    1.630277] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.668376] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
[    1.668378] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.668380] usb usb3: Product: OHCI PCI host controller
[    1.668381] usb usb3: Manufacturer: Linux 5.2.13-arch1-1-ARCH ohci_hcd
[    1.668382] usb usb3: SerialNumber: 0000:00:12.0
[    1.668497] hub 3-0:1.0: USB hub found
[    1.668505] hub 3-0:1.0: 3 ports detected
[    1.668773] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    1.668777] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.668798] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe8fd000
[    1.714431] tsc: Refined TSC clocksource calibration: 3800.000 MHz
[    1.714438] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d8cb0e20f4, max_idle_ns: 881590468932 ns
[    1.714458] clocksource: Switched to clocksource tsc
[    1.718555] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
[    1.718558] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.718559] usb usb4: Product: OHCI PCI host controller
[    1.718561] usb usb4: Manufacturer: Linux 5.2.13-arch1-1-ARCH ohci_hcd
[    1.718562] usb usb4: SerialNumber: 0000:00:12.1
[    1.718699] hub 4-0:1.0: USB hub found
[    1.718713] hub 4-0:1.0: 3 ports detected
[    1.719083] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.719088] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.719126] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe8fc000
[    1.777424] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
[    1.777426] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.777427] usb usb5: Product: OHCI PCI host controller
[    1.777429] usb usb5: Manufacturer: Linux 5.2.13-arch1-1-ARCH ohci_hcd
[    1.777430] usb usb5: SerialNumber: 0000:00:13.0
[    1.777528] hub 5-0:1.0: USB hub found
[    1.777537] hub 5-0:1.0: 3 ports detected
[    1.777767] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    1.777771] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    1.777788] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe8fb000
[    1.821752] ata3: SATA link down (SStatus 0 SControl 300)
[    1.822873] ata4: SATA link down (SStatus 0 SControl 300)
[    1.837425] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
[    1.837427] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.837428] usb usb6: Product: OHCI PCI host controller
[    1.837429] usb usb6: Manufacturer: Linux 5.2.13-arch1-1-ARCH ohci_hcd
[    1.837430] usb usb6: SerialNumber: 0000:00:13.1
[    1.837536] hub 6-0:1.0: USB hub found
[    1.837545] hub 6-0:1.0: 3 ports detected
[    1.837780] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.837785] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[    1.837802] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe8fa000
[    1.850030] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.897423] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
[    1.897424] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.897425] usb usb7: Product: OHCI PCI host controller
[    1.897426] usb usb7: Manufacturer: Linux 5.2.13-arch1-1-ARCH ohci_hcd
[    1.897427] usb usb7: SerialNumber: 0000:00:14.5
[    1.897532] hub 7-0:1.0: USB hub found
[    1.897541] hub 7-0:1.0: 2 ports detected
[    1.980047] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.980770] ata2.00: ATA-8: WDC WD1600AAJS-00L7A0, 01.03E01, max UDMA/133
[    1.980772] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.981586] ata2.00: configured for UDMA/133
[    1.986706] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.988120] ata1.00: ATA-8: WDC WD5000AUDX-63WNHY0, 01.01A01, max UDMA/133
[    1.988121] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.988938] ata1.00: configured for UDMA/133
[    1.989141] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AUDX-6 1A01 PQ: 0 ANSI: 5
[    1.989452] scsi 1:0:0:0: Direct-Access     ATA      WDC WD1600AAJS-0 3E01 PQ: 0 ANSI: 5
[    1.991568] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.991571] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.991583] sd 0:0:0:0: [sda] Write Protect is off
[    1.991585] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.991604] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.991605] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.991615] sd 1:0:0:0: [sdb] Write Protect is off
[    1.991617] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.991645] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.995450]  sdb: sdb1
[    1.995831] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.058235]  sda: sda1 sda2 sda3 sda4
[    2.058711] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.070026] usb 1-1: New USB device found, idVendor=0ac8, idProduct=c40a, bcdDevice= 1.00
[    2.070029] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.070030] usb 1-1: Product: A4 TECH USB2.0 PC Camera J
[    2.070032] usb 1-1: Manufacturer: A4 TECH
[    2.413378] usb 3-2: new low-speed USB device number 2 using ohci-pci
[    2.597101] usb 3-2: New USB device found, idVendor=18f8, idProduct=0f97, bcdDevice= 1.00
[    2.597103] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.597104] usb 3-2: Product: USB OPTICAL MOUSE 
[    2.602702] hidraw: raw HID events driver (C) Jiri Kosina
[    2.612953] random: fast init done
[    2.614322] usbcore: registered new interface driver usbhid
[    2.614323] usbhid: USB HID core driver
[    2.615916] input: USB OPTICAL MOUSE  as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:18F8:0F97.0001/input/input3
[    2.615958] hid-generic 0003:18F8:0F97.0001: input,hidraw0: USB HID v1.10 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:12.0-2/input0
[    2.616225] input: USB OPTICAL MOUSE  Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:18F8:0F97.0002/input/input4
[    2.670087] input: USB OPTICAL MOUSE  Consumer Control as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:18F8:0F97.0002/input/input5
[    2.670194] hid-generic 0003:18F8:0F97.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [USB OPTICAL MOUSE ] on usb-0000:00:12.0-2/input1
[    2.829898] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.176692] usb 3-3: new full-speed USB device number 3 using ohci-pci
[    3.375154] usb 3-3: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 1.10
[    3.375156] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.375158] usb 3-3: Product: Controller(XBOX 360 For Windows
[    3.375159] usb 3-3: Manufacturer: hongjingda
[    3.375160] usb 3-3: SerialNumber: 10F36D6
[    3.843359] usb 1-6: new high-speed USB device number 5 using ehci-pci
[    3.902699] random: crng init done
[    3.994261] usb 1-6: New USB device found, idVendor=2357, idProduct=010c, bcdDevice= 0.00
[    3.994263] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.994264] usb 1-6: Product: 802.11n NIC
[    3.994265] usb 1-6: Manufacturer: Realtek
[    3.994266] usb 1-6: SerialNumber: 00E04C0001
[    4.019287] systemd[1]: systemd 243.0-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    4.033399] systemd[1]: Detected architecture x86-64.
[    4.044509] systemd[1]: Set hostname to <ArchLinuxPC>.
[    5.402889] systemd[1]: Created slice system-getty.slice.
[    5.403093] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.403257] systemd[1]: Created slice User and Session Slice.
[    5.403300] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.403333] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.403501] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.403524] systemd[1]: Reached target Local Encrypted Volumes.
[    5.575405] EXT4-fs (sda3): re-mounted. Opts: (null)
[    6.134919] audit: type=1130 audit(1568778578.311:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.144218] audit: type=1325 audit(1568778578.318:3): table=filter family=2 entries=0
[    6.224708] systemd-journald[292]: Received client request to flush runtime journal.
[    6.666378] audit: type=1130 audit(1568778578.841:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.748409] audit: type=1325 audit(1568778578.924:5): table=filter family=10 entries=0
[    6.750063] audit: type=1325 audit(1568778578.928:6): table=filter family=2 entries=4
[    6.815876] audit: type=1325 audit(1568778578.994:7): table=filter family=2 entries=4
[    6.951852] audit: type=1325 audit(1568778579.128:8): table=filter family=2 entries=58
[    6.954021] audit: type=1325 audit(1568778579.131:9): table=filter family=2 entries=60
[    6.956171] audit: type=1325 audit(1568778579.131:10): table=filter family=2 entries=64
[    7.208943] audit: type=1325 audit(1568778579.384:11): table=filter family=2 entries=73
[   10.090046] acpi_cpufreq: overriding BIOS provided _PSD data
[   10.484305] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   10.527417] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20190509/utaddress-204)
[   10.527424] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.598704] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   10.608279] libphy: r8169: probed
[   10.608488] r8169 0000:02:00.0 eth0: RTL8168g/8111g, f4:b5:20:00:a0:fb, XID 4c0, IRQ 26
[   10.608490] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   10.703947] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[   10.724884] Linux agpgart interface v0.103
[   10.879958] cryptd: max_cpu_qlen set to 1000
[   10.935169] mousedev: PS/2 mouse device common for all mice
[   10.977710] AVX version of gcm_enc/dec engaged.
[   10.977712] AES CTR mode by8 optimization enabled
[   11.111900] r8169 0000:02:00.0 enp2s0: renamed from eth0
[   11.166017] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   11.171147] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   11.177435] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input8
[   11.177589] usbcore: registered new interface driver xpad
[   11.193822] lib80211: common routines for IEEE802.11 drivers
[   11.193824] lib80211_crypt: registered algorithm 'NULL'
[   11.302800] [drm] radeon kernel modesetting enabled.
[   11.302904] radeon 0000:01:05.0: remove_conflicting_pci_framebuffers: bar 0: 0xd0000000 -> 0xdfffffff
[   11.302911] radeon 0000:01:05.0: remove_conflicting_pci_framebuffers: bar 2: 0xfeaf0000 -> 0xfeafffff
[   11.302916] radeon 0000:01:05.0: remove_conflicting_pci_framebuffers: bar 5: 0xfe900000 -> 0xfe9fffff
[   11.302920] checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
[   11.302924] fb0: switching to radeondrmfb from VESA VGA
[   11.302973] Console: switching to colour dummy device 80x25
[   11.303144] radeon 0000:01:05.0: vgaarb: deactivate vga console
[   11.303732] [drm] initializing kernel modesetting (RS880 0x1002:0x9714 0x1565:0x0017 0x00).
[   11.303791] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[   11.303801] caller pci_map_rom+0x6a/0x17d mapping multiple BARs
[   11.305560] ATOM BIOS: B43106
[   11.305591] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[   11.305596] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[   11.305608] [drm] Detected VRAM RAM=256M, BAR=256M
[   11.305610] [drm] RAM width 32bits DDR
[   11.305703] [TTM] Zone  kernel: Available graphics memory: 3954240 KiB
[   11.305706] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[   11.305707] [TTM] Initializing pool allocator
[   11.305717] [TTM] Initializing DMA pool allocator
[   11.305745] [drm] radeon: 256M of VRAM memory ready
[   11.305748] [drm] radeon: 512M of GTT memory ready.
[   11.305766] [drm] Loading RS780 Microcode
[   11.342690] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   11.342692] cfg80211: failed to load regulatory.db
[   11.379980] media: Linux media interface: v0.10
[   11.465977] videodev: Linux video capture interface: v2.00
[   11.584490] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
[   11.597664] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
[   11.629602] usbcore: registered new interface driver r8188eu
[   11.662284] usbcore: registered new interface driver snd-usb-audio
[   11.686238] [drm] radeon: power management initialized
[   11.702845] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   11.707659] [drm] PCIE GART of 512M enabled (table at 0x00000000C0146000).
[   11.707701] radeon 0000:01:05.0: WB enabled
[   11.707704] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0x00000000e2017d92
[   11.709787] radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x00000000c0056038 and cpu addr 0x00000000f3c314ef
[   11.709789] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   11.709790] [drm] Driver supports precise vblank timestamp query.
[   11.709791] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[   11.709803] [drm] radeon: irq initialized.
[   11.744052] [drm] ring test on 0 succeeded in 1 usecs
[   11.806542] r8188eu 1-6:1.0 wlp0s18f2u6: renamed from wlan0
[   11.841810] kvm: Nested Virtualization enabled
[   11.841814] kvm: Nested Paging enabled
[   11.878867] uvcvideo: Found UVC 1.00 device A4 TECH USB2.0 PC Camera J (0ac8:c40a)
[   11.884188] uvcvideo 1-1:1.0: Entity type for entity Processing 2 was not initialized!
[   11.884193] uvcvideo 1-1:1.0: Entity type for entity Camera 1 was not initialized!
[   11.884198] uvcvideo 1-1:1.0: Entity type for entity Extension 4 was not initialized!
[   11.884343] input: A4 TECH USB2.0 PC Camera J as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input9
[   11.884484] usbcore: registered new interface driver uvcvideo
[   11.884487] USB Video Class driver (1.1.1)
[   11.907003] MCE: In-kernel MCE decoding enabled.
[   11.922169] [drm] ring test on 5 succeeded in 1 usecs
[   11.922173] [drm] UVD initialized successfully.
[   11.922278] [drm] ib test on ring 0 succeeded in 0 usecs
[   11.943923] EDAC amd64: Node 0: DRAM ECC disabled.
[   11.943924] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   11.994333] EDAC amd64: Node 0: DRAM ECC disabled.
[   11.994336] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   12.087413] EDAC amd64: Node 0: DRAM ECC disabled.
[   12.087415] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   12.088511] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   12.088528] snd_hda_codec_realtek hdaudioC1D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.088531] snd_hda_codec_realtek hdaudioC1D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   12.088533] snd_hda_codec_realtek hdaudioC1D2:    mono: mono_out=0x0
[   12.088535] snd_hda_codec_realtek hdaudioC1D2:    inputs:
[   12.088538] snd_hda_codec_realtek hdaudioC1D2:      Front Mic=0x19
[   12.088541] snd_hda_codec_realtek hdaudioC1D2:      Rear Mic=0x18
[   12.088543] snd_hda_codec_realtek hdaudioC1D2:      Line=0x1a
[   12.103953] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[   12.104043] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[   12.104133] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[   12.104215] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[   12.104296] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[   12.150667] EDAC amd64: Node 0: DRAM ECC disabled.
[   12.150670] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   12.593405] [drm] ib test on ring 5 succeeded
[   12.594090] [drm] Radeon Display Connectors
[   12.594092] [drm] Connector 0:
[   12.594094] [drm]   VGA-1
[   12.594097] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   12.594098] [drm]   Encoders:
[   12.594100] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   12.594101] [drm] Connector 1:
[   12.594102] [drm]   HDMI-A-1
[   12.594104] [drm]   HPD3
[   12.594106] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[   12.594107] [drm]   Encoders:
[   12.594109] [drm]     DFP3: INTERNAL_KLDSCP_LVTMA
[   12.641109] [drm] fb mappable at 0xD0247000
[   12.641110] [drm] vram apper at 0xD0000000
[   12.641111] [drm] size 8294400
[   12.641112] [drm] fb depth is 24
[   12.641112] [drm]    pitch is 7680
[   12.641192] fbcon: radeondrmfb (fb0) is primary device
[   12.660218] Console: switching to colour frame buffer device 240x67
[   12.677161] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[   12.700305] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:05.0 on minor 0
[   13.146334] kauditd_printk_skb: 18 callbacks suppressed
[   13.146336] audit: type=1130 audit(1568778585.321:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.664945] audit: type=1130 audit(1568778585.841:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-114a9557\x2d06ba\x2d4bf8\x2da0a3\x2d64694ed15fc4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.766337] audit: type=1130 audit(1568778585.941:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-796b8965\x2dbf92\x2d4930\x2d8534\x2d7d8d350dad4f comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.803799] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[   13.863926] EXT4-fs (sda2): mounted filesystem without journal. Opts: stripe=4
[   13.942133] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   14.749679] audit: type=1130 audit(1568778586.924:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.814969] audit: type=1127 audit(1568778586.991:34): pid=487 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[   14.884305] audit: type=1130 audit(1568778587.061:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.289855] audit: type=1130 audit(1568778587.464:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.935754] audit: type=1130 audit(1568778588.111:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.961233] audit: type=1130 audit(1568778588.138:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.983003] audit: type=1130 audit(1568778588.158:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.966377] kauditd_printk_skb: 6 callbacks suppressed
[   18.966382] audit: type=1130 audit(1568778591.141:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.355709] audit: type=1130 audit(1568778591.531:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.107253] MAC Address = 7c:8b:ca:1b:9a:a7
[   21.507176] R8188EU: assoc success
[   21.736361] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s18f2u6: link becomes ready
[   22.125200] audit: type=1130 audit(1568778594.301:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=netctl@wlp0s18f2u6\x2dMTC_443 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.127868] audit: type=1130 audit(1568778594.304:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=netctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.887607] 8021q: 802.1Q VLAN Support v1.8
[   25.607820] audit: type=1130 audit(1568778597.784:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.611159] audit: type=1130 audit(1568778597.788:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=accounts-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   34.337957] audit: type=1130 audit(1568778606.514:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=mariadb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   44.587457] audit: type=1130 audit(1568778616.764:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   44.872032] audit: type=1006 audit(1568778617.048:54): pid=1109 uid=0 old-auid=4294967295 auid=975 tty=(none) old-ses=4294967295 ses=1 res=1
[   46.464482] audit: type=1130 audit(1568778618.641:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   51.363103] audit: type=1130 audit(1568778623.538:56): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   51.363114] audit: type=1131 audit(1568778623.538:57): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   60.596895] fuse: init (API version 7.31)
[   95.551232] audit: type=1006 audit(1568778667.728:58): pid=1195 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   95.575714] audit: type=1130 audit(1568778667.751:59): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   95.585669] audit: type=1006 audit(1568778667.761:60): pid=1200 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[   95.709960] audit: type=1130 audit(1568778667.884:61): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   95.999914] audit: type=1112 audit(1568778668.178:62): pid=1195 uid=0 auid=1000 ses=2 msg='op=login id=1000 exe="/usr/bin/lightdm" hostname=ArchLinuxPC addr=? terminal=/dev/tty7 res=success'
[  100.901897] audit: type=1130 audit(1568778673.078:63): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  105.614357] audit: type=1131 audit(1568778677.791:64): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  105.625407] audit: type=1131 audit(1568778677.801:65): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  127.969604] [UFW BLOCK] IN=wlp0s18f2u6 OUT= MAC=7c:8b:ca:1b:9a:a7:e4:6f:13:ee:74:43:08:00 SRC=0.0.0.0 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 
[  187.266785] audit: type=1130 audit(1568778759.441:66): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=updatedb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  187.266797] audit: type=1131 audit(1568778759.441:67): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=updatedb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  253.410882] [UFW BLOCK] IN=wlp0s18f2u6 OUT= MAC=7c:8b:ca:1b:9a:a7:e4:6f:13:ee:74:43:08:00 SRC=0.0.0.0 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 
[  378.851925] [UFW BLOCK] IN=wlp0s18f2u6 OUT= MAC=7c:8b:ca:1b:9a:a7:e4:6f:13:ee:74:43:08:00 SRC=0.0.0.0 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2

Offline

#5 2019-09-18 06:46:56

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,347

Re: [SOLVED] How do i transfer files to old or old-like phones

On a quick glance the dmesg doesn't indicate any recognition of the device being attached.
Run "dmesg -w" plug in the phone and see whether that causes any tail in dmesg (you can "write" into the dmesg output. I usually press "-" until i can see a nice splitter that allows me to easily spot what got added)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#6 2019-09-18 11:35:45

RAK_V_LiNux'e
Banned
Registered: 2018-04-09
Posts: 36

Re: [SOLVED] How do i transfer files to old or old-like phones

idk what is different now but before when i connected the usb, the phone was just charging, but now it prompted me with a "usb config" and i selected the "mass storage option"
and look! dmesg caught something

---------------------------------------------------------------------------------------------------------------------------[  312.689549] [UFW BLOCK] IN=wlp0s18f2u6 OUT= MAC=7c:8b:ca:1b:9a:a7:e4:6f:13:ee:74:43:08:00 SRC=0.0.0.0 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[  366.150035] usb 1-4: new high-speed USB device number 6 using ehci-pci
[  366.297578] usb 1-4: New USB device found, idVendor=0e8d, idProduct=0002, bcdDevice= 1.00
[  366.297584] usb 1-4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[  366.297588] usb 1-4: Product: MM917
[  366.297591] usb 1-4: Manufacturer: MM917
[  366.297594] usb 1-4: SerialNumber: 53735501103017f
[  366.409700] usb-storage 1-4:1.0: USB Mass Storage device detected
[  366.409918] scsi host6: usb-storage 1-4:1.0
[  366.410045] usbcore: registered new interface driver usb-storage
[  366.422847] usbcore: registered new interface driver uas
[  367.420686] scsi 6:0:0:0: Direct-Access     MM917                          PQ: 0 ANSI: 0 CCS
[  367.421163] scsi 6:0:0:1: Direct-Access     MM917                          PQ: 0 ANSI: 0 CCS
[  367.421662] scsi 6:0:0:2: CD-ROM            MM917                          PQ: 0 ANSI: 0 CCS
[  367.423691] sd 6:0:0:1: [sdd] 69632 512-byte logical blocks: (35.7 MB/34.0 MiB)
[  367.424454] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[  367.428179] sd 6:0:0:1: [sdd] Write Protect is off
[  367.428186] sd 6:0:0:1: [sdd] Mode Sense: 03 00 00 00
[  367.428785] sd 6:0:0:1: [sdd] No Caching mode page found
[  367.428790] sd 6:0:0:1: [sdd] Assuming drive cache: write through
[  367.432847]  sdd:
[  367.435784] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[  367.488653] sr 6:0:0:2: [sr0] scsi3-mmc drive: 0x/0x caddy
[  367.488656] cdrom: Uniform CD-ROM driver Revision: 3.20
[  367.488954] sr 6:0:0:2: Attached scsi CD-ROM sr0
[  438.130909] [UFW BLOCK] IN=wlp0s18f2u6 OUT= MAC=7c:8b:ca:1b:9a:a7:e4:6f:13:ee:74:43:08:00 SRC=0.0.0.0 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2

Offline

#7 2019-09-18 11:36:46

RAK_V_LiNux'e
Banned
Registered: 2018-04-09
Posts: 36

Re: [SOLVED] How do i transfer files to old or old-like phones

also, now lsusb shows me this entry:

Bus 001 Device 006: ID 0e8d:0002 MediaTek Inc. MM917

Offline

#8 2019-09-18 11:37:37

RAK_V_LiNux'e
Banned
Registered: 2018-04-09
Posts: 36

Re: [SOLVED] How do i transfer files to old or old-like phones

fdisk -l

Disk /dev/sdd: 34 MiB, 35651584 bytes, 69632 sectors
Disk model:
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000

Offline

#9 2019-09-18 12:12:02

RAK_V_LiNux'e
Banned
Registered: 2018-04-09
Posts: 36

Re: [SOLVED] How do i transfer files to old or old-like phones

should i mount it and transfer files there?

Offline

#10 2019-09-18 12:13:58

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,347

Re: [SOLVED] How do i transfer files to old or old-like phones

Yup. I recall my blackberry behaved the same (you'd get an option what to do on the phone and depending on whether the phone was locked, that wasn't always reliably happening ;-)

Please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#11 2019-09-18 12:14:58

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,412

Re: [SOLVED] How do i transfer files to old or old-like phones

Well I'd suspect so... Please  don't create quadruple posts instead edit your last post if you are the only one posting in between your posts.

Offline

Pages: 1

Board footer

Powered by FluxBB