Arch Linux

stepnem

Member

Registered: 2019-08-04

Posts: 18

acpi broken after system upgrade (from linux 5.3.4 to 5.3.7)

Since last system update, `acpi -t` hangs forever (cannot even be SIGKILL'ed).

In dmesg there are messages such as "int3402 thermal: probe of INT3402:00 failed with error -22".

Any advice on how to fix this?

Full dmesg ( http://ix.io/1ZpG ):

[    0.000000] microcode: microcode updated early to revision 0x21, date = 2019-02-13
[    0.000000] Linux version 5.3.7-arch1-1-ARCH (builduser@heftig-2611250) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT Fri Oct 18 00:17:03 UTC 2019
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c1509a25-de05-4470-bcbe-09a30bdee2f1 rw audit=0 loglevel=3 random.trust_cpu=on resume=/dev/sda2 resume_offset=253952..
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d8c08fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d8c09000-0x00000000d909bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d909c000-0x00000000d90b9fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d90ba000-0x00000000d9fbafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d9fbb000-0x00000000da532fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000da533000-0x00000000da5f8fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000da5f9000-0x00000000da5f9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da5fa000-0x00000000da63cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000da63d000-0x00000000dacc1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dacc2000-0x00000000daff4fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000daff5000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011e5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xd90a2000  ACPI 2.0=0xd90a2000  SMBIOS=0xf04c0 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Panasonic Corporation CF-AX2LDCHM3/CFAX2-1, BIOS V1.50L11 02/22/2013
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2295.040 MHz processor
[    0.002751] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002754] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002765] last_pfn = 0x11e600 max_arch_pfn = 0x400000000
[    0.002771] MTRR default type: uncachable
[    0.002772] MTRR fixed ranges enabled:
[    0.002774]   00000-9FFFF write-back
[    0.002775]   A0000-BFFFF uncachable
[    0.002777]   C0000-CFFFF write-protect
[    0.002778]   D0000-DFFFF uncachable
[    0.002779]   E0000-FFFFF write-protect
[    0.002780] MTRR variable ranges enabled:
[    0.002782]   0 base 000000000 mask F00000000 write-back
[    0.002784]   1 base 100000000 mask FE0000000 write-back
[    0.002785]   2 base 0E0000000 mask FE0000000 uncachable
[    0.002787]   3 base 0DC000000 mask FFC000000 uncachable
[    0.002788]   4 base 0DB800000 mask FFF800000 uncachable
[    0.002789]   5 base 11F000000 mask FFF000000 uncachable
[    0.002790]   6 base 11E800000 mask FFF800000 uncachable
[    0.002792]   7 base 11E600000 mask FFFE00000 uncachable
[    0.002793]   8 disabled
[    0.002793]   9 disabled
[    0.003343] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003628] total RAM covered: 3998M
[    0.004110] Found optimal setting for mtrr clean up
[    0.004111]  gran_size: 64K 	chunk_size: 128M 	num_reg: 9  	lose cover RAM: 0G
[    0.004587] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[    0.004592] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.020848] check: Scanning 1 areas for low memory corruption
[    0.020856] BRK [0x29a01000, 0x29a01fff] PGTABLE
[    0.020859] BRK [0x29a02000, 0x29a02fff] PGTABLE
[    0.020860] BRK [0x29a03000, 0x29a03fff] PGTABLE
[    0.020955] BRK [0x29a04000, 0x29a04fff] PGTABLE
[    0.020957] BRK [0x29a05000, 0x29a05fff] PGTABLE
[    0.021184] BRK [0x29a06000, 0x29a06fff] PGTABLE
[    0.021306] BRK [0x29a07000, 0x29a07fff] PGTABLE
[    0.021488] BRK [0x29a08000, 0x29a08fff] PGTABLE
[    0.021602] BRK [0x29a09000, 0x29a09fff] PGTABLE
[    0.021828] BRK [0x29a0a000, 0x29a0afff] PGTABLE
[    0.021985] BRK [0x29a0b000, 0x29a0bfff] PGTABLE
[    0.022576] BRK [0x29a0c000, 0x29a0cfff] PGTABLE
[    0.022673] Secure boot could not be determined
[    0.022675] RAMDISK: [mem 0x36911000-0x3747ffff]
[    0.022686] ACPI: Early table checksum verification disabled
[    0.022690] ACPI: RSDP 0x00000000D90A2000 000024 (v02 MATBIO)
[    0.022694] ACPI: XSDT 0x00000000D90A2090 0000A4 (v01 MATBIO CFAX2-1  01072009 AMI  00010013)
[    0.022703] ACPI: FACP 0x00000000D90AF748 00010C (v05 MATBIO CFAX2-1  01072009 AMI  00010013)
[    0.022711] ACPI: DSDT 0x00000000D90A21C8 00D579 (v02 MATBIO CFAX2-1  00000022 INTL 20091112)
[    0.022716] ACPI: FACS 0x00000000D9FB9080 000040
[    0.022720] ACPI: APIC 0x00000000D90AF858 000072 (v03 MATBIO CFAX2-1  01072009 AMI  00010013)
[    0.022724] ACPI: FPDT 0x00000000D90AF8D0 000044 (v01 MATBIO CFAX2-1  01072009 AMI  00010013)
[    0.022728] ACPI: TCPA 0x00000000D90AF918 000032 (v02 MATBIO CFAX2-1  00000001 MSFT 01000013)
[    0.022733] ACPI: MCFG 0x00000000D90AF950 00003C (v01 MATBIO CFAX2-1  01072009 MSFT 00000097)
[    0.022737] ACPI: SLIC 0x00000000D90AF990 000176 (v01 MATBIO CFAX2-1  01072009 AMI  00010013)
[    0.022742] ACPI: HPET 0x00000000D90AFB08 000038 (v01 MATBIO CFAX2-1  01072009 AMI. 00000005)
[    0.022746] ACPI: SSDT 0x00000000D90AFB40 000321 (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.022751] ACPI: SSDT 0x00000000D90AFE68 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.022755] ACPI: SSDT 0x00000000D90B0818 000A9C (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.022760] ACPI: SSDT 0x00000000D90B12B8 000250 (v01 PmRef  Cpu0Tst  00003000 INTL 20051117)
[    0.022765] ACPI: SSDT 0x00000000D90B1508 00047C (v01 PmRef  ApTst    00003000 INTL 20051117)
[    0.022769] ACPI: ASF! 0x00000000D90B1988 000079 (v32 MATBIO CFAX2-1  01072009 INTL 000F4240)
[    0.022774] ACPI: SSDT 0x00000000D90B1A08 00798F (v01 DppmRe OemDppm  00001000 INTL 20091112)
[    0.022778] ACPI: MSDM 0x00000000D90B9398 000055 (v03 MATBIO CFAX2-1  01072009 AMI  00010013)
[    0.022783] ACPI: BGRT 0x00000000D90B93F0 000038 (v00 MATBIO CFAX2-1  01072009 AMI  00010013)
[    0.022796] ACPI: Local APIC address 0xfee00000
[    0.022905] No NUMA configuration found
[    0.022907] Faking a node at [mem 0x0000000000000000-0x000000011e5fffff]
[    0.022912] NODE_DATA(0) allocated [mem 0x11e5fa000-0x11e5fdfff]
[    0.022942] Zone ranges:
[    0.022943]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.022945]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.022946]   Normal   [mem 0x0000000100000000-0x000000011e5fffff]
[    0.022947]   Device   empty
[    0.022949] Movable zone start for each node
[    0.022949] Early memory node ranges
[    0.022951]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.022952]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.022953]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.022954]   node   0: [mem 0x0000000040005000-0x00000000d8c08fff]
[    0.022956]   node   0: [mem 0x00000000da5f9000-0x00000000da5f9fff]
[    0.022957]   node   0: [mem 0x00000000da63d000-0x00000000dacc1fff]
[    0.022958]   node   0: [mem 0x00000000daff5000-0x00000000daffffff]
[    0.022959]   node   0: [mem 0x0000000100000000-0x000000011e5fffff]
[    0.023180] Zeroed struct page in unavailable ranges: 28617 pages
[    0.023182] Initmem setup node 0 [mem 0x0000000000001000-0x000000011e5fffff]
[    0.023185] On node 0 totalpages: 1013303
[    0.023186]   DMA zone: 64 pages used for memmap
[    0.023187]   DMA zone: 26 pages reserved
[    0.023188]   DMA zone: 3998 pages, LIFO batch:0
[    0.023265]   DMA32 zone: 13827 pages used for memmap
[    0.023266]   DMA32 zone: 884889 pages, LIFO batch:63
[    0.039760]   Normal zone: 1944 pages used for memmap
[    0.039763]   Normal zone: 124416 pages, LIFO batch:31
[    0.041877] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
[    0.042147] ACPI: PM-Timer IO Port: 0x408
[    0.042150] ACPI: Local APIC address 0xfee00000
[    0.042160] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.042176] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.042179] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.042181] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.042183] ACPI: IRQ0 used by override.
[    0.042185] ACPI: IRQ9 used by override.
[    0.042188] Using ACPI (MADT) for SMP configuration information
[    0.042190] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.042206] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.042244] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.042247] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.042248] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.042251] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.042253] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.042255] PM: Registered nosave memory: [mem 0xd8c09000-0xd909bfff]
[    0.042256] PM: Registered nosave memory: [mem 0xd909c000-0xd90b9fff]
[    0.042257] PM: Registered nosave memory: [mem 0xd90ba000-0xd9fbafff]
[    0.042258] PM: Registered nosave memory: [mem 0xd9fbb000-0xda532fff]
[    0.042259] PM: Registered nosave memory: [mem 0xda533000-0xda5f8fff]
[    0.042262] PM: Registered nosave memory: [mem 0xda5fa000-0xda63cfff]
[    0.042264] PM: Registered nosave memory: [mem 0xdacc2000-0xdaff4fff]
[    0.042267] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
[    0.042268] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
[    0.042268] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.042269] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.042270] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.042271] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.042272] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.042273] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.042274] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.042275] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.042275] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.042276] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.042277] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.042278] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.042281] [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.042282] Booting paravirtualized kernel on bare hardware
[    0.042286] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.209733] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.210006] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[    0.210017] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[    0.210018] pcpu-alloc: [0] 0 1 2 3 
[    0.210052] Built 1 zonelists, mobility grouping on.  Total pages: 997442
[    0.210053] Policy zone: Normal
[    0.210055] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c1509a25-de05-4470-bcbe-09a30bdee2f1 rw audit=0 loglevel=3 random.trust_cpu=on resume=/dev/sda2 resume_offset=253952..
[    0.210115] audit: disabled (until reboot)
[    0.210517] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.210674] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.210752] mem auto-init: stack:byref_all, heap alloc:off, heap free:off
[    0.215821] Calgary: detecting Calgary via BIOS EBDA area
[    0.215824] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.229499] Memory: 3678420K/4053212K available (12291K kernel code, 1321K rwdata, 3952K rodata, 1632K init, 3548K bss, 374792K reserved, 0K cma-reserved)
[    0.229665] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.229681] Kernel/User page tables isolation: enabled
[    0.229702] ftrace: allocating 37808 entries in 148 pages
[    0.251382] rcu: Preemptible hierarchical RCU implementation.
[    0.251384] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.251385] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.251386] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.251387] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.251388] 	Tasks RCU enabled.
[    0.251389] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.251390] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.254092] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
[    0.254319] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.254390] random: crng done (trusting CPU's manufacturer)
[    0.254429] Console: colour dummy device 80x25
[    0.254435] printk: console [tty0] enabled
[    0.254461] ACPI: Core revision 20190703
[    0.254689] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.254706] APIC: Switch to symmetric I/O mode setup
[    0.254780] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.255278] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.271375] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2114e7cc7d5, max_idle_ns: 440795282695 ns
[    0.271380] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.33 BogoMIPS (lpj=7650133)
[    0.271383] pid_max: default: 32768 minimum: 301
[    0.281390] LSM: Security Framework initializing
[    0.281395] Yama: becoming mindful.
[    0.281428] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.281438] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.281656] *** VALIDATE proc ***
[    0.281722] *** VALIDATE cgroup1 ***
[    0.281724] *** VALIDATE cgroup2 ***
[    0.281789] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.281802] process: using mwait in idle threads
[    0.281806] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.281807] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.281811] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.281813] Spectre V2 : Mitigation: Full generic retpoline
[    0.281814] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.281815] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.281817] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.281818] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.281820] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.281824] MDS: Mitigation: Clear CPU buffers
[    0.282083] Freeing SMP alternatives memory: 32K
[    0.284817] TSC deadline timer enabled
[    0.284821] smpboot: CPU0: Intel(R) Core(TM) i5-3427U CPU @ 1.80GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.304733] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.304756] ... version:                3
[    0.304757] ... bit width:              48
[    0.304757] ... generic registers:      4
[    0.304759] ... value mask:             0000ffffffffffff
[    0.304759] ... max period:             00007fffffffffff
[    0.304760] ... fixed-purpose events:   3
[    0.304761] ... event mask:             000000070000000f
[    0.311388] rcu: Hierarchical SRCU implementation.
[    0.331719] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.338064] smp: Bringing up secondary CPUs ...
[    0.378089] x86: Booting SMP configuration:
[    0.378090] .... node  #0, CPUs:      #1 #2
[    0.423872] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.461427]  #3
[    0.463831] smp: Brought up 1 node, 4 CPUs
[    0.463831] smpboot: Max logical packages: 1
[    0.463831] smpboot: Total of 4 processors activated (18367.33 BogoMIPS)
[    0.464903] devtmpfs: initialized
[    0.464903] x86/mm: Memory block size: 128MB
[    0.465394] PM: Registering ACPI NVS region [mem 0xd90ba000-0xd9fbafff] (15732736 bytes)
[    0.465394] PM: Registering ACPI NVS region [mem 0xda5fa000-0xda63cfff] (274432 bytes)
[    0.465394] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.465394] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.465394] pinctrl core: initialized pinctrl subsystem
[    0.465394] PM: RTC time: 08:38:10, date: 2019-10-21
[    0.465394] NET: Registered protocol family 16
[    0.465394] cpuidle: using governor ladder
[    0.471384] cpuidle: using governor menu
[    0.471483] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.471485] ACPI: bus type PCI registered
[    0.471487] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.471589] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.471592] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.471609] PCI: Using configuration type 1 for base access
[    0.471671] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.471933] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.472623] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.474885] ACPI: Added _OSI(Module Device)
[    0.474887] ACPI: Added _OSI(Processor Device)
[    0.474888] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.474889] ACPI: Added _OSI(Processor Aggregator Device)
[    0.474891] ACPI: Added _OSI(Linux-Dell-Video)
[    0.474892] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.474893] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.495260] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.497290] ACPI: Dynamic OEM Table Load:
[    0.497297] ACPI: SSDT 0xFFFF910318F75100 000072 (v01 DynTbl EightTbl 00000001 INTL 20091112)
[    0.505568] ACPI: Dynamic OEM Table Load:
[    0.505578] ACPI: SSDT 0xFFFF910318E10000 0009D2 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.507510] ACPI: Dynamic OEM Table Load:
[    0.507517] ACPI: SSDT 0xFFFF910318FAC800 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.509108] ACPI: Dynamic OEM Table Load:
[    0.509113] ACPI: SSDT 0xFFFF910318EF1800 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.513436] ACPI: EC: EC started
[    0.513438] ACPI: EC: interrupt blocked
[    0.955897] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.955901] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.955902] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.955903] ACPI: Interpreter enabled
[    0.955941] ACPI: (supports S0 S3 S4 S5)
[    0.955942] ACPI: Using IOAPIC for interrupt routing
[    0.955991] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.958043] ACPI: Enabled 6 GPEs in block 00 to 3F
[    0.980542] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.980550] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.981950] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.981952] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.982753] PCI host bridge to bus 0000:00
[    0.982756] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.982758] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.982760] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.982762] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.982763] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.982765] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.982766] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.982768] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    0.982770] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.982772] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.982786] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.982943] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.982958] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.982965] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.982971] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.982987] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.983154] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[    0.983168] pci 0000:00:04.0: reg 0x10: [mem 0xfed98000-0xfed9ffff 64bit]
[    0.983351] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.983380] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
[    0.983468] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.983607] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.983637] pci 0000:00:16.0: reg 0x10: [mem 0xf7f23000-0xf7f2300f 64bit]
[    0.983729] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.983873] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.983899] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f20000-0xf7f203ff]
[    0.984000] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.984138] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.984161] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f18000-0xf7f1bfff 64bit]
[    0.984247] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.984390] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.984559] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.984732] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.984964] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.985130] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.985297] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.985467] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.985494] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f1f000-0xf7f1f3ff]
[    0.985594] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.985735] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[    0.985984] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.986007] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.986017] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.986026] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.986035] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.986045] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.986054] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f1e000-0xf7f1e7ff]
[    0.986107] pci 0000:00:1f.2: PME# supported from D3hot
[    0.986241] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.986265] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f1d000-0xf7f1d0ff 64bit]
[    0.986290] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.986437] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[    0.986463] pci 0000:00:1f.6: reg 0x10: [mem 0xf7f1c000-0xf7f1cfff 64bit]
[    0.986734] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.986740] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.986746] pci 0000:00:1c.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.986754] pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
[    0.986936] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000
[    0.987025] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d00fff]
[    0.987513] pci 0000:02:00.0: supports D1 D2
[    0.987515] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
[    0.987871] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.987875] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.987880] pci 0000:00:1c.1:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.987887] pci 0000:00:1c.1:   bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[    0.988176] pci 0000:03:00.0: [8086:0082] type 00 class 0x028000
[    0.988435] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
[    0.989265] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.989793] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.989799] pci 0000:00:1c.2:   bridge window [io  0xc000-0xcfff]
[    0.989804] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.989813] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.991635] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.991756] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.991871] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.991985] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.992100] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.992215] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.992332] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.992448] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.993071] ACPI: EC: interrupt unblocked
[    0.993071] ACPI: EC: event unblocked
[    0.993071] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.993071] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[    0.993071] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.993071] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.993071] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.993071] vgaarb: loaded
[    0.993071] ACPI: bus type USB registered
[    0.993071] usbcore: registered new interface driver usbfs
[    0.993071] usbcore: registered new interface driver hub
[    0.993079] usbcore: registered new device driver usb
[    0.993079] pps_core: LinuxPPS API ver. 1 registered
[    0.993079] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.993079] PTP clock support registered
[    0.993079] EDAC MC: Ver: 3.0.0
[    0.993079] Registered efivars operations
[    0.993079] PCI: Using ACPI for IRQ routing
[    0.993079] PCI: pci_cache_line_size set to 64 bytes
[    0.993079] pci 0000:00:04.0: can't claim BAR 0 [mem 0xfed98000-0xfed9ffff 64bit]: no compatible bridge window
[    0.993079] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.993079] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.993079] e820: reserve RAM buffer [mem 0xd8c09000-0xdbffffff]
[    0.993079] e820: reserve RAM buffer [mem 0xda5fa000-0xdbffffff]
[    0.993079] e820: reserve RAM buffer [mem 0xdacc2000-0xdbffffff]
[    0.993079] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.993079] e820: reserve RAM buffer [mem 0x11e600000-0x11fffffff]
[    0.994717] NetLabel: Initializing
[    0.994717] NetLabel:  domain hash size = 128
[    0.994717] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.994717] NetLabel:  unlabeled traffic allowed by default
[    0.995500] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.995507] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.999113] clocksource: Switched to clocksource tsc-early
[    1.014779] VFS: Disk quotas dquot_6.6.0
[    1.014804] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.014845] *** VALIDATE hugetlbfs ***
[    1.014905] pnp: PnP ACPI init
[    1.015896] system 00:00: [mem 0x000cee00-0x000cffff] has been reserved
[    1.015905] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.016058] system 00:01: [io  0x1000-0x100f] has been reserved
[    1.016061] system 00:01: [io  0xffff] has been reserved
[    1.016063] system 00:01: [io  0xffff] has been reserved
[    1.016065] system 00:01: [io  0x0400-0x0453] has been reserved
[    1.016067] system 00:01: [io  0x0458-0x047f] has been reserved
[    1.016069] system 00:01: [io  0x0500-0x057f] has been reserved
[    1.016071] system 00:01: [io  0x0900-0x097f] has been reserved
[    1.016077] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.016115] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.016196] system 00:03: [io  0x0454-0x0457] has been reserved
[    1.016202] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.016273] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    1.016278] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.016358] pnp 00:05: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    1.016437] pnp 00:06: Plug and Play ACPI device, IDs MAT0025 PNP0303 (active)
[    1.017140] pnp 00:07: Plug and Play ACPI device, IDs SYN0503 PNP0f13 (active)
[    1.017547] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.017549] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.017551] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.017553] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.017555] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.017557] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.017559] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.017561] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.017563] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    1.017565] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.017567] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
[    1.017572] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.017683] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
[    1.017685] system 00:09: [mem 0x000f0000-0x000fffff] could not be reserved
[    1.017691] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.017988] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[    1.017990] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
[    1.017995] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.018142] pnp: PnP ACPI: found 11 devices
[    1.020404] thermal_sys: Registered thermal governor 'fair_share'
[    1.020405] thermal_sys: Registered thermal governor 'bang_bang'
[    1.020406] thermal_sys: Registered thermal governor 'step_wise'
[    1.020407] thermal_sys: Registered thermal governor 'user_space'
[    1.020408] thermal_sys: Registered thermal governor 'power_allocator'
[    1.024973] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.025037] pci 0000:00:04.0: BAR 0: assigned [mem 0xdfa00000-0xdfa07fff 64bit]
[    1.025045] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.025053] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    1.025060] pci 0000:00:1c.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    1.025066] pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
[    1.025075] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    1.025079] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    1.025086] pci 0000:00:1c.1:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    1.025090] pci 0000:00:1c.1:   bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[    1.025099] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    1.025102] pci 0000:00:1c.2:   bridge window [io  0xc000-0xcfff]
[    1.025109] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    1.025114] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    1.025125] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.025127] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.025129] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.025130] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    1.025132] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    1.025134] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    1.025136] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    1.025137] pci_bus 0000:00: resource 11 [mem 0xdfa00000-0xfeafffff window]
[    1.025139] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff window]
[    1.025141] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    1.025143] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
[    1.025144] pci_bus 0000:01: resource 2 [mem 0xf0200000-0xf02fffff 64bit pref]
[    1.025146] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    1.025148] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    1.025150] pci_bus 0000:02: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
[    1.025151] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    1.025153] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    1.025155] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    1.025347] NET: Registered protocol family 2
[    1.025521] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.025531] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    1.025593] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    1.025667] TCP: Hash tables configured (established 32768 bind 32768)
[    1.025700] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.025712] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.025772] NET: Registered protocol family 1
[    1.025779] NET: Registered protocol family 44
[    1.025791] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.048222] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x63a took 21569 usecs
[    1.068214] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x63a took 19496 usecs
[    1.068289] pci 0000:03:00.0: CLS mismatch (64 != 32), using 64 bytes
[    1.068343] Trying to unpack rootfs image as initramfs...
[    1.263989] Freeing initrd memory: 11708K
[    1.263998] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.264001] software IO TLB: mapped [mem 0xc8eeb000-0xcceeb000] (64MB)
[    1.264215] check: Scanning for low memory corruption every 60 seconds
[    1.264742] Initialise system trusted keyrings
[    1.264755] Key type blacklist registered
[    1.264814] workingset: timestamp_bits=41 max_order=20 bucket_order=0
[    1.266596] zbud: loaded
[    1.274781] Key type asymmetric registered
[    1.274783] Asymmetric key parser 'x509' registered
[    1.274798] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    1.274888] io scheduler mq-deadline registered
[    1.274890] io scheduler kyber registered
[    1.274936] io scheduler bfq registered
[    1.275498] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
[    1.275841] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25
[    1.275886] pcieport 0000:00:1c.1: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.276274] pcieport 0000:00:1c.2: PME: Signaling with IRQ 26
[    1.276389] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.276511] efifb: probing for efifb
[    1.276530] efifb: framebuffer at 0xe0000000, using 5120k, total 5120k
[    1.276531] efifb: mode is 1280x1024x32, linelength=5120, pages=1
[    1.276532] efifb: scrolling: redraw
[    1.276534] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.276592] fbcon: Deferring console take-over
[    1.276594] fb0: EFI VGA frame buffer device
[    1.276605] intel_idle: MWAIT substates: 0x21120
[    1.276606] intel_idle: v0.4.1 model 0x3A
[    1.276831] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.276938] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.278080] ACPI: Lid Switch [LID]
[    1.278137] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.278147] ACPI: Power Button [PWRB]
[    1.278191] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.281407] ACPI: Power Button [PWRF]
[    1.303501] thermal LNXTHERM:00: registered as thermal_zone0
[    1.303505] ACPI: Thermal Zone [TZ00] (59 C)
[    1.319551] thermal LNXTHERM:01: registered as thermal_zone1
[    1.319555] ACPI: Thermal Zone [TZ01] (59 C)
[    1.320042] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.321235] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.321237] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    1.322204] usbcore: registered new interface driver usbserial_generic
[    1.322211] usbserial: USB Serial support registered for generic
[    1.322243] rtc_cmos 00:02: RTC can wake from S4
[    1.322441] rtc_cmos 00:02: registered as rtc0
[    1.322461] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.322542] intel_pstate: Intel P-state driver initializing
[    1.322965] ledtrig-cpu: registered to indicate activity on CPUs
[    1.323597] NET: Registered protocol family 10
[    1.346537] Segment Routing with IPv6
[    1.346572] NET: Registered protocol family 17
[    1.347102] RAS: Correctable Errors collector initialized.
[    1.347143] microcode: sig=0x306a9, pf=0x10, revision=0x21
[    1.347283] microcode: Microcode Update Driver: v2.2.
[    1.347296] sched_clock: Marking stable (1346911157, 366523)->(1370011116, -22733436)
[    1.347581] registered taskstats version 1
[    1.347590] Loading compiled-in X.509 certificates
[    1.351625] Loaded X.509 cert 'Build time autogenerated kernel key: a8f69e58fd882cfcd2571a1f28e21cb64150108f'
[    1.351652] zswap: loaded using pool lzo/zbud
[    1.360860] Key type big_key registered
[    1.361723] PM:   Magic number: 7:32:625
[    1.361838] rtc_cmos 00:02: setting system clock to 2019-10-21T08:38:11 UTC (1571647091)
[    1.363711] Freeing unused decrypted memory: 2040K
[    1.364146] Freeing unused kernel image memory: 1632K
[    1.388217] Write protecting the kernel read-only data: 18432k
[    1.389854] Freeing unused kernel image memory: 2012K
[    1.390228] Freeing unused kernel image memory: 144K
[    1.408650] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.408651] x86/mm: Checking user space page tables
[    1.418883] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.418885] Run /init as init process
[    1.576680] fbcon: Taking over console
[    1.576750] Console: switching to colour frame buffer device 160x64
[    1.647475] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.663185] i8042: Detected active multiplexing controller, rev 1.0
[    1.663315] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.666079] rtsx_pci 0000:02:00.0: enabling device (0000 -> 0002)
[    1.672465] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.672506] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.672544] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.672583] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.672620] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.673031] ehci-pci: EHCI PCI platform driver
[    1.673178] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.673186] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.673201] ehci-pci 0000:00:1a.0: debug port 2
[    1.677135] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.677160] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f20000
[    1.684140] SCSI subsystem initialized
[    1.688074] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.688152] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.688154] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.688157] usb usb1: Product: EHCI Host Controller
[    1.688158] usb usb1: Manufacturer: Linux 5.3.7-arch1-1-ARCH ehci_hcd
[    1.688160] usb usb1: SerialNumber: 0000:00:1a.0
[    1.688329] hub 1-0:1.0: USB hub found
[    1.688338] hub 1-0:1.0: 2 ports detected
[    1.688535] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.688544] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.689623] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[    1.689632] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.689842] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.689845] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.689847] usb usb2: Product: xHCI Host Controller
[    1.689849] usb usb2: Manufacturer: Linux 5.3.7-arch1-1-ARCH xhci-hcd
[    1.689851] usb usb2: SerialNumber: 0000:00:14.0
[    1.690281] hub 2-0:1.0: USB hub found
[    1.690338] hub 2-0:1.0: 4 ports detected
[    1.693450] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.693457] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    1.693474] ehci-pci 0000:00:1d.0: debug port 2
[    1.697393] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.697413] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f1f000
[    1.697710] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.697716] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.697722] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.697783] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[    1.697786] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.697788] usb usb4: Product: xHCI Host Controller
[    1.697789] usb usb4: Manufacturer: Linux 5.3.7-arch1-1-ARCH xhci-hcd
[    1.697791] usb usb4: SerialNumber: 0000:00:14.0
[    1.697949] hub 4-0:1.0: USB hub found
[    1.697962] hub 4-0:1.0: 4 ports detected
[    1.700419] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.701458] libata version 3.00 loaded.
[    1.706507] ahci 0000:00:1f.2: version 3.0
[    1.706754] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.706777] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    1.706781] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
[    1.708127] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.708202] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.708205] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.708207] usb usb3: Product: EHCI Host Controller
[    1.708209] usb usb3: Manufacturer: Linux 5.3.7-arch1-1-ARCH ehci_hcd
[    1.708211] usb usb3: SerialNumber: 0000:00:1d.0
[    1.708375] hub 3-0:1.0: USB hub found
[    1.708387] hub 3-0:1.0: 2 ports detected
[    1.708702] scsi host0: ahci
[    1.710580] scsi host1: ahci
[    1.710688] scsi host2: ahci
[    1.710897] scsi host3: ahci
[    1.710985] scsi host4: ahci
[    1.711090] scsi host5: ahci
[    1.711135] ata1: SATA max UDMA/133 abar m2048@0xf7f1e000 port 0xf7f1e100 irq 29
[    1.711137] ata2: DUMMY
[    1.711137] ata3: DUMMY
[    1.711138] ata4: DUMMY
[    1.711139] ata5: DUMMY
[    1.711139] ata6: DUMMY
[    2.018174] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.021473] usb 2-3: new full-speed USB device number 2 using xhci_hcd
[    2.026143] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.027567] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.027575] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.027955] ata1.00: ATA-9: SAMSUNG MZMPC128HBFU-00000, CXM1201Q, max UDMA/133
[    2.027962] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    2.029100] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.029107] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.029560] ata1.00: configured for UDMA/133
[    2.038163] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    2.040314] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MZMPC128 201Q PQ: 0 ANSI: 5
[    2.056235] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    2.056250] sd 0:0:0:0: [sda] Write Protect is off
[    2.056252] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.056272] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.057895]  sda: sda1 sda2
[    2.058216] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.102665] PM: Image not found (code -22)
[    2.162940] usb 2-3: New USB device found, idVendor=0eef, idProduct=7903, bcdDevice= 2.10
[    2.162946] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.162950] usb 2-3: Product: eGalaxTouch EXC7903-02v10
[    2.162953] usb 2-3: Manufacturer: eGalax Inc.
[    2.165018] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    2.165019] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.165488] hub 1-1:1.0: USB hub found
[    2.165517] hub 1-1:1.0: 6 ports detected
[    2.169037] hidraw: raw HID events driver (C) Jiri Kosina
[    2.173549] usbcore: registered new interface driver usbhid
[    2.173551] usbhid: USB HID core driver
[    2.175595] input: eGalax Inc. eGalaxTouch EXC7903-02v10 Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:0EEF:7903.0001/input/input8
[    2.175637] input: eGalax Inc. eGalaxTouch EXC7903-02v10 as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:0EEF:7903.0001/input/input9
[    2.175749] hid-generic 0003:0EEF:7903.0001: input,hiddev0,hidraw0: USB HID v2.10 Pointer [eGalax Inc. eGalaxTouch EXC7903-02v10] on usb-0000:00:14.0-3/input0
[    2.178534] input: eGalax Inc. eGalaxTouch EXC7903-02v10 as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:0EEF:7903.0001/input/input11
[    2.178634] hid-multitouch 0003:0EEF:7903.0001: input,hiddev0,hidraw0: USB HID v2.10 Pointer [eGalax Inc. eGalaxTouch EXC7903-02v10] on usb-0000:00:14.0-3/input0
[    2.185172] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    2.185175] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.185439] hub 3-1:1.0: USB hub found
[    2.185517] hub 3-1:1.0: 8 ports detected
[    2.201580] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.281411] tsc: Refined TSC clocksource calibration: 2294.793 MHz
[    2.281439] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113fe4d86e, max_idle_ns: 440795230200 ns
[    2.281514] clocksource: Switched to clocksource tsc
[    2.284748] usb 2-4: new full-speed USB device number 3 using xhci_hcd
[    2.366339] systemd[1]: systemd 243.78-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.381724] systemd[1]: Detected architecture x86-64.
[    2.386824] systemd[1]: Set hostname to <panda>.
[    2.426347] usb 2-4: New USB device found, idVendor=04b5, idProduct=0680, bcdDevice= 1.58
[    2.426351] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.426354] usb 2-4: Product: HID Sensor Board DFUP2183ZA
[    2.426356] usb 2-4: Manufacturer: Kionix Inc
[    2.426358] usb 2-4: SerialNumber: 7548067C15C453C415020202FF41A0
[    2.435500] hid-generic 0003:04B5:0680.0002: hiddev1,hidraw1: USB HID v1.12 Device [Kionix Inc HID Sensor Board DFUP2183ZA] on usb-0000:00:14.0-4/input0
[    2.436375] hid-generic 0003:04B5:0680.0003: hiddev2,hidraw2: USB HID v1.12 Device [Kionix Inc HID Sensor Board DFUP2183ZA] on usb-0000:00:14.0-4/input1
[    2.448074] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    2.468063] usb 3-1.5: new full-speed USB device number 3 using ehci-pci
[    2.556006] usb 1-1.2: New USB device found, idVendor=5986, idProduct=0297, bcdDevice= 1.08
[    2.556010] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.556012] usb 1-1.2: Product: USB HD Webcam
[    2.556014] usb 1-1.2: Manufacturer: Vimicro Corp.
[    2.556015] usb 1-1.2: SerialNumber: MI1320_SOC
[    2.565536] systemd[1]: Created slice system-getty.slice.
[    2.565861] systemd[1]: Created slice system-netctl\x2dauto.slice.
[    2.566132] systemd[1]: Created slice system-parcimonie.sh.slice.
[    2.566457] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.566737] systemd[1]: Created slice User and Session Slice.
[    2.566873] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.566998] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.584262] usb 3-1.5: New USB device found, idVendor=044e, idProduct=301d, bcdDevice=88.91
[    2.584266] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.584268] usb 3-1.5: Product: UGNZH
[    2.584270] usb 3-1.5: Manufacturer: ALPS
[    2.605160] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[    2.841399] Adding 4194300k swap on /swapfile.  Priority:-2 extents:6 across:4481020k SSFS
[    2.924409] systemd-journald[288]: Received client request to flush runtime journal.
[    3.115126] ACPI: AC Adapter [AC] (on-line)
[    3.138824] Bluetooth: Core ver 2.22
[    3.138838] NET: Registered protocol family 31
[    3.138839] Bluetooth: HCI device and connection manager initialized
[    3.138843] Bluetooth: HCI socket layer initialized
[    3.138845] Bluetooth: L2CAP socket layer initialized
[    3.138848] Bluetooth: SCO socket layer initialized
[    3.182383] input: Panasonic Laptop Support as /devices/virtual/input/input14
[    3.248983] usbcore: registered new interface driver btusb
[    3.314794] mousedev: PS/2 mouse device common for all mice
[    3.318555] tpm_tis 00:05: 1.2 TPM (device-id 0xB, rev-id 16)
[    3.386543] int3402 thermal: probe of INT3402:00 failed with error -22
[    3.391729] battery: ACPI: Battery Slot [BAT1] (battery present)
[    3.398192] mc: Linux media interface: v0.10
[    3.415261] Linux agpgart interface v0.103
[    3.416314] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    3.416404] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190703/utaddress-204)
[    3.416417] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.420192] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204)
[    3.420204] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.420300] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204)
[    3.420309] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.420338] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204)
[    3.420346] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.420347] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.485722] battery: ACPI: Battery Slot [BAT2] (battery present)
[    3.489113] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.496338] videodev: Linux video capture interface: v2.00
[    3.498405] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.500335] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.500337] cfg80211: failed to load regulatory.db
[    3.588172] input: PC Speaker as /devices/platform/pcspkr/input/input15
[    3.639839] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    3.673773] Intel(R) Wireless WiFi driver for Linux
[    3.673774] Copyright(c) 2003- 2015 Intel Corporation
[    3.673881] iwlwifi 0000:03:00.0: enabling device (0100 -> 0102)
[    3.674075] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.677722] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    3.681452] uvcvideo: Found UVC 1.00 device USB HD Webcam (5986:0297)
[    3.683832] uvcvideo: Failed to query (GET_INFO) UVC control 11 on unit 1: -32 (exp. 1).
[    3.684250] uvcvideo: Failed to query (GET_INFO) UVC control 13 on unit 1: -32 (exp. 1).
[    3.689860] uvcvideo 1-1.2:1.0: Entity type for entity Processing 2 was not initialized!
[    3.689863] uvcvideo 1-1.2:1.0: Entity type for entity Camera 1 was not initialized!
[    3.689866] uvcvideo 1-1.2:1.0: Entity type for entity Extension 4 was not initialized!
[    3.689957] input: USB HD Webcam: USB HD Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input18
[    3.690031] usbcore: registered new interface driver uvcvideo
[    3.690032] USB Video Class driver (1.1.1)
[    3.709239] int3403 thermal: probe of INT3403:00 failed with error -22
[    3.729661] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    3.729663] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    3.729665] RAPL PMU: hw unit of domain package 2^-16 Joules
[    3.729666] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    3.776804] int3403 thermal: probe of INT3403:01 failed with error -22
[    3.843324] int3403 thermal: probe of INT3403:02 failed with error -22
[    3.900746] int3403 thermal: probe of INT3403:03 failed with error -22
[    3.918447] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
[    3.918450] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[    3.918452] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    3.918454] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[    3.954391] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    3.960748] checking generic (e0000000 500000) vs hw (e0000000 10000000)
[    3.960750] fb0: switching to inteldrmfb from EFI VGA
[    3.960835] Console: switching to colour dummy device 80x25
[    3.960887] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.966632] cryptd: max_cpu_qlen set to 1000
[    3.981985] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.981987] [drm] Driver supports precise vblank timestamp query.
[    3.982971] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.994760] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[    4.027319] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.027928] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input19
[    4.028147] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.060443] fbcon: i915drmfb (fb0) is primary device
[    4.060555] Console: switching to colour frame buffer device 160x64
[    4.065587] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    4.173004] psmouse serio2: synaptics: queried max coordinates: x [..5694], y [..4798]
[    4.180664] AVX version of gcm_enc/dec engaged.
[    4.180666] AES CTR mode by8 optimization enabled
[    4.185737] iTCO_vendor_support: vendor-support=0
[    4.191678] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    4.191737] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    4.191937] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.209320] psmouse serio2: synaptics: queried min coordinates: x [1248..], y [1056..]
[    4.209324] psmouse serio2: synaptics: Trying to set up SMBus access
[    4.222806] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    4.222810] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.222812] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    4.222814] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.222816] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.222818] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x18
[    4.222820] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    4.242243] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    4.274484] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[    4.274541] input: HDA Intel PCH Headset Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[    4.274592] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[    4.274640] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25
[    4.349364] rmi4_smbus 0-002c: registering SMbus-connected sensor
[    4.435649] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM2379-001, fw id: 0
[    4.518825] input: Synaptics TM2379-001 as /devices/rmi4-00/input/input26
[    4.672047] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[    4.698069] usb 1-1.1: new high-speed USB device number 4 using ehci-pci
[    4.797338] intel_rapl_common: Found RAPL domain package
[    4.797341] intel_rapl_common: Found RAPL domain core
[    4.797343] intel_rapl_common: Found RAPL domain uncore
[    4.803241] usb 1-1.1: config 2 has an invalid interface number: 5 but max is 1
[    4.803244] usb 1-1.1: config 2 has an invalid interface number: 6 but max is 1
[    4.803254] usb 1-1.1: config 2 has an invalid interface number: 6 but max is 1
[    4.803259] usb 1-1.1: config 2 has no interface number 0
[    4.803261] usb 1-1.1: config 2 has no interface number 1
[    4.803989] usb 1-1.1: New USB device found, idVendor=1199, idProduct=9011, bcdDevice= 0.02
[    4.803992] usb 1-1.1: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[    4.803993] usb 1-1.1: Product: MC8305
[    4.803995] usb 1-1.1: Manufacturer: Sierra Wireless Inc
[    4.835231] usbcore: registered new interface driver qcserial
[    4.835248] usbserial: USB Serial support registered for Qualcomm USB modem
[    4.842137] usbcore: registered new interface driver cdc_ncm
[    4.858641] usbcore: registered new interface driver cdc_wdm
[    4.881992] cdc_mbim 1-1.1:2.5: cdc-wdm1: USB WDM device
[    4.966610] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[    5.048428] cdc_mbim 1-1.1:2.5 wwan0: register 'cdc_mbim' at usb-0000:00:1a.0-1.1, CDC MBIM, fa:89:c1:f4:51:62
[    5.048466] usbcore: registered new interface driver cdc_mbim
[    5.052820] cdc_mbim 1-1.1:2.5 wwp0s26u1u1c2i5: renamed from wwan0
[    8.203191] wlp3s0: authenticate with 00:19:5b:d9:f4:30
[    8.209005] wlp3s0: send auth to 00:19:5b:d9:f4:30 (try 1/3)
[    8.211872] wlp3s0: authenticated
[    8.212235] iwlwifi 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[    8.212240] iwlwifi 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[    8.214850] wlp3s0: associate with 00:19:5b:d9:f4:30 (try 1/3)
[    8.217531] wlp3s0: RX AssocResp from 00:19:5b:d9:f4:30 (capab=0x431 status=0 aid=1)
[    8.221807] wlp3s0: associated
[    8.459704] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[    8.535878] 8021q: 802.1Q VLAN Support v1.8
[  368.773186] INFO: task kworker/0:1:7 blocked for more than 122 seconds.
[  368.773193]       Not tainted 5.3.7-arch1-1-ARCH #1
[  368.773196] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  368.773200] kworker/0:1     D    0     7      2 0x80004000
[  368.773220] Workqueue: kacpi_notify acpi_os_execute_deferred
[  368.773230] Call Trace:
[  368.773246]  ? __schedule+0x27f/0x6d0
[  368.773252]  schedule+0x43/0xd0
[  368.773257]  schedule_preempt_disabled+0x14/0x20
[  368.773262]  __mutex_lock.isra.0+0x27d/0x530
[  368.773273]  thermal_zone_get_temp+0x3b/0x80
[  368.773280]  thermal_zone_device_update.part.0+0x37/0x190
[  368.773288]  acpi_ev_notify_dispatch+0x4a/0x5f
[  368.773294]  acpi_os_execute_deferred+0x16/0x20
[  368.773301]  process_one_work+0x1d1/0x3a0
[  368.773306]  worker_thread+0x4a/0x3d0
[  368.773311]  kthread+0xfb/0x130
[  368.773316]  ? process_one_work+0x3a0/0x3a0
[  368.773319]  ? kthread_park+0x80/0x80
[  368.773325]  ret_from_fork+0x35/0x40
[  368.773347] INFO: task kworker/u8:5:232 blocked for more than 122 seconds.
[  368.773349]       Not tainted 5.3.7-arch1-1-ARCH #1
[  368.773351] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  368.773353] kworker/u8:5    D    0   232      2 0x80004000
[  368.773362] Workqueue: events_freezable_power_ thermal_zone_device_check
[  368.773364] Call Trace:
[  368.773371]  ? __schedule+0x27f/0x6d0
[  368.773376]  schedule+0x43/0xd0
[  368.773381]  schedule_timeout+0x299/0x3d0
[  368.773388]  wait_for_common+0xeb/0x190
[  368.773393]  ? wake_up_q+0x60/0x60
[  368.773399]  __flush_work+0x130/0x1e0
[  368.773404]  ? flush_workqueue_prep_pwqs+0x130/0x130
[  368.773411]  __cancel_work_timer+0x123/0x1b0
[  368.773417]  handle_thermal_trip+0xd8/0x1e0
[  368.773423]  thermal_zone_device_update.part.0+0x6c/0x190
[  368.773428]  process_one_work+0x1d1/0x3a0
[  368.773433]  worker_thread+0x4a/0x3d0
[  368.773438]  kthread+0xfb/0x130
[  368.773442]  ? process_one_work+0x3a0/0x3a0
[  368.773445]  ? kthread_park+0x80/0x80
[  368.773451]  ret_from_fork+0x35/0x40
[  491.650554] INFO: task kworker/0:1:7 blocked for more than 245 seconds.
[  491.650562]       Not tainted 5.3.7-arch1-1-ARCH #1
[  491.650565] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  491.650570] kworker/0:1     D    0     7      2 0x80004000
[  491.650598] Workqueue: kacpi_notify acpi_os_execute_deferred
[  491.650602] Call Trace:
[  491.650620]  ? __schedule+0x27f/0x6d0
[  491.650626]  schedule+0x43/0xd0
[  491.650632]  schedule_preempt_disabled+0x14/0x20
[  491.650637]  __mutex_lock.isra.0+0x27d/0x530
[  491.650650]  thermal_zone_get_temp+0x3b/0x80
[  491.650657]  thermal_zone_device_update.part.0+0x37/0x190
[  491.650666]  acpi_ev_notify_dispatch+0x4a/0x5f
[  491.650673]  acpi_os_execute_deferred+0x16/0x20
[  491.650681]  process_one_work+0x1d1/0x3a0
[  491.650687]  worker_thread+0x4a/0x3d0
[  491.650693]  kthread+0xfb/0x130
[  491.650698]  ? process_one_work+0x3a0/0x3a0
[  491.650701]  ? kthread_park+0x80/0x80
[  491.650709]  ret_from_fork+0x35/0x40
[  491.650732] INFO: task kworker/u8:5:232 blocked for more than 245 seconds.
[  491.650735]       Not tainted 5.3.7-arch1-1-ARCH #1
[  491.650736] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  491.650738] kworker/u8:5    D    0   232      2 0x80004000
[  491.650748] Workqueue: events_freezable_power_ thermal_zone_device_check
[  491.650750] Call Trace:
[  491.650757]  ? __schedule+0x27f/0x6d0
[  491.650763]  schedule+0x43/0xd0
[  491.650769]  schedule_timeout+0x299/0x3d0
[  491.650776]  wait_for_common+0xeb/0x190
[  491.650782]  ? wake_up_q+0x60/0x60
[  491.650788]  __flush_work+0x130/0x1e0
[  491.650794]  ? flush_workqueue_prep_pwqs+0x130/0x130
[  491.650801]  __cancel_work_timer+0x123/0x1b0
[  491.650809]  handle_thermal_trip+0xd8/0x1e0
[  491.650815]  thermal_zone_device_update.part.0+0x6c/0x190
[  491.650821]  process_one_work+0x1d1/0x3a0
[  491.650827]  worker_thread+0x4a/0x3d0
[  491.650832]  kthread+0xfb/0x130
[  491.650836]  ? process_one_work+0x3a0/0x3a0
[  491.650840]  ? kthread_park+0x80/0x80
[  491.650846]  ret_from_fork+0x35/0x40
[  491.650880] INFO: task acpi:4003 blocked for more than 122 seconds.
[  491.650882]       Not tainted 5.3.7-arch1-1-ARCH #1
[  491.650884] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  491.650886] acpi            D    0  4003   4002 0x00000000
[  491.650890] Call Trace:
[  491.650896]  ? __schedule+0x27f/0x6d0
[  491.650902]  schedule+0x43/0xd0
[  491.650908]  schedule_preempt_disabled+0x14/0x20
[  491.650912]  __mutex_lock.isra.0+0x27d/0x530
[  491.650922]  thermal_zone_get_temp+0x3b/0x80
[  491.650929]  temp_show+0x33/0x70
[  491.650936]  dev_attr_show+0x19/0x40
[  491.650944]  sysfs_kf_seq_show+0x9b/0xf0
[  491.650951]  seq_read+0xcd/0x400
[  491.650959]  vfs_read+0x9d/0x150
[  491.650966]  ksys_read+0x67/0xe0
[  491.650975]  do_syscall_64+0x5f/0x1c0
[  491.650983]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  491.650989] RIP: 0033:0x14c98669c3f2
[  491.651002] Code: Bad RIP value.
[  491.651005] RSP: 002b:00007ffef1c68ec8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[  491.651009] RAX: ffffffffffffffda RBX: 0000561d417f6330 RCX: 000014c98669c3f2
[  491.651011] RDX: 0000000000001000 RSI: 0000561d41800d30 RDI: 0000000000000004
[  491.651014] RBP: 000014c98676e300 R08: 0000000000000004 R09: 0000561d41801d30
[  491.651016] R10: 0000000000000000 R11: 0000000000000246 R12: 0000561d417f6330
[  491.651018] R13: 000014c98676d700 R14: 0000000000000d68 R15: 0000000000000d68
[  491.651027] INFO: task acpi:4089 blocked for more than 122 seconds.
[  491.651029]       Not tainted 5.3.7-arch1-1-ARCH #1
[  491.651030] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  491.651032] acpi            D    0  4089   4088 0x00000000
[  491.651035] Call Trace:
[  491.651041]  ? __schedule+0x27f/0x6d0
[  491.651047]  schedule+0x43/0xd0
[  491.651052]  schedule_preempt_disabled+0x14/0x20
[  491.651056]  __mutex_lock.isra.0+0x27d/0x530
[  491.651067]  thermal_zone_get_temp+0x3b/0x80
[  491.651073]  temp_show+0x33/0x70
[  491.651078]  dev_attr_show+0x19/0x40
[  491.651084]  sysfs_kf_seq_show+0x9b/0xf0
[  491.651089]  seq_read+0xcd/0x400
[  491.651097]  vfs_read+0x9d/0x150
[  491.651104]  ksys_read+0x67/0xe0
[  491.651110]  do_syscall_64+0x5f/0x1c0
[  491.651117]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  491.651120] RIP: 0033:0x7f00e38013f2
[  491.651127] Code: Bad RIP value.
[  491.651129] RSP: 002b:00007fffafe5f758 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[  491.651133] RAX: ffffffffffffffda RBX: 000055e498dd7330 RCX: 00007f00e38013f2
[  491.651135] RDX: 0000000000001000 RSI: 000055e498de1d30 RDI: 0000000000000004
[  491.651137] RBP: 00007f00e38d3300 R08: 0000000000000004 R09: 000055e498de2d30
[  491.651139] R10: 0000000000000000 R11: 0000000000000246 R12: 000055e498dd7330
[  491.651141] R13: 00007f00e38d2700 R14: 0000000000000d68 R15: 0000000000000d68
[  491.651149] INFO: task acpi:4182 blocked for more than 122 seconds.
[  491.651151]       Not tainted 5.3.7-arch1-1-ARCH #1
[  491.651152] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  491.651154] acpi            D    0  4182   4181 0x00000000
[  491.651157] Call Trace:
[  491.651162]  ? __schedule+0x27f/0x6d0
[  491.651168]  schedule+0x43/0xd0
[  491.651173]  schedule_preempt_disabled+0x14/0x20
[  491.651178]  __mutex_lock.isra.0+0x27d/0x530
[  491.651187]  thermal_zone_get_temp+0x3b/0x80
[  491.651193]  temp_show+0x33/0x70
[  491.651199]  dev_attr_show+0x19/0x40
[  491.651205]  sysfs_kf_seq_show+0x9b/0xf0
[  491.651210]  seq_read+0xcd/0x400
[  491.651218]  vfs_read+0x9d/0x150
[  491.651224]  ksys_read+0x67/0xe0
[  491.651230]  do_syscall_64+0x5f/0x1c0
[  491.651237]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  491.651240] RIP: 0033:0x7f759a99c3f2
[  491.651246] Code: Bad RIP value.
[  491.651248] RSP: 002b:00007ffc48484c88 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[  491.651251] RAX: ffffffffffffffda RBX: 0000561139b50330 RCX: 00007f759a99c3f2
[  491.651253] RDX: 0000000000001000 RSI: 0000561139b5ad30 RDI: 0000000000000004
[  491.651255] RBP: 00007f759aa6e300 R08: 0000000000000004 R09: 0000561139b5bd30
[  491.651257] R10: 0000000000000000 R11: 0000000000000246 R12: 0000561139b50330
[  491.651260] R13: 00007f759aa6d700 R14: 0000000000000d68 R15: 0000000000000d68
[  614.527031] INFO: task kworker/0:1:7 blocked for more than 368 seconds.
[  614.527040]       Not tainted 5.3.7-arch1-1-ARCH #1
[  614.527043] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  614.527049] kworker/0:1     D    0     7      2 0x80004000
[  614.527070] Workqueue: kacpi_notify acpi_os_execute_deferred
[  614.527074] Call Trace:
[  614.527091]  ? __schedule+0x27f/0x6d0
[  614.527098]  schedule+0x43/0xd0
[  614.527103]  schedule_preempt_disabled+0x14/0x20
[  614.527109]  __mutex_lock.isra.0+0x27d/0x530
[  614.527121]  thermal_zone_get_temp+0x3b/0x80
[  614.527128]  thermal_zone_device_update.part.0+0x37/0x190
[  614.527137]  acpi_ev_notify_dispatch+0x4a/0x5f
[  614.527144]  acpi_os_execute_deferred+0x16/0x20
[  614.527152]  process_one_work+0x1d1/0x3a0
[  614.527158]  worker_thread+0x4a/0x3d0
[  614.527164]  kthread+0xfb/0x130
[  614.527169]  ? process_one_work+0x3a0/0x3a0
[  614.527172]  ? kthread_park+0x80/0x80
[  614.527180]  ret_from_fork+0x35/0x40
[  614.527206] INFO: task kworker/u8:5:232 blocked for more than 368 seconds.
[  614.527209]       Not tainted 5.3.7-arch1-1-ARCH #1
[  614.527210] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  614.527212] kworker/u8:5    D    0   232      2 0x80004000
[  614.527221] Workqueue: events_freezable_power_ thermal_zone_device_check
[  614.527224] Call Trace:
[  614.527231]  ? __schedule+0x27f/0x6d0
[  614.527237]  schedule+0x43/0xd0
[  614.527243]  schedule_timeout+0x299/0x3d0
[  614.527250]  wait_for_common+0xeb/0x190
[  614.527256]  ? wake_up_q+0x60/0x60
[  614.527263]  __flush_work+0x130/0x1e0
[  614.527269]  ? flush_workqueue_prep_pwqs+0x130/0x130
[  614.527276]  __cancel_work_timer+0x123/0x1b0
[  614.527284]  handle_thermal_trip+0xd8/0x1e0
[  614.527290]  thermal_zone_device_update.part.0+0x6c/0x190
[  614.527296]  process_one_work+0x1d1/0x3a0
[  614.527302]  worker_thread+0x4a/0x3d0
[  614.527307]  kthread+0xfb/0x130
[  614.527312]  ? process_one_work+0x3a0/0x3a0
[  614.527315]  ? kthread_park+0x80/0x80
[  614.527321]  ret_from_fork+0x35/0x40
[  614.527356] INFO: task acpi:4003 blocked for more than 245 seconds.
[  614.527358]       Not tainted 5.3.7-arch1-1-ARCH #1
[  614.527360] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  614.527361] acpi            D    0  4003   4002 0x00000000
[  614.527366] Call Trace:
[  614.527372]  ? __schedule+0x27f/0x6d0
[  614.527379]  schedule+0x43/0xd0
[  614.527383]  schedule_preempt_disabled+0x14/0x20
[  614.527388]  __mutex_lock.isra.0+0x27d/0x530
[  614.527398]  thermal_zone_get_temp+0x3b/0x80
[  614.527405]  temp_show+0x33/0x70
[  614.527413]  dev_attr_show+0x19/0x40
[  614.527421]  sysfs_kf_seq_show+0x9b/0xf0
[  614.527428]  seq_read+0xcd/0x400
[  614.527438]  vfs_read+0x9d/0x150
[  614.527445]  ksys_read+0x67/0xe0
[  614.527453]  do_syscall_64+0x5f/0x1c0
[  614.527461]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  614.527467] RIP: 0033:0x14c98669c3f2
[  614.527481] Code: Bad RIP value.
[  614.527484] RSP: 002b:00007ffef1c68ec8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[  614.527488] RAX: ffffffffffffffda RBX: 0000561d417f6330 RCX: 000014c98669c3f2
[  614.527491] RDX: 0000000000001000 RSI: 0000561d41800d30 RDI: 0000000000000004
[  614.527493] RBP: 000014c98676e300 R08: 0000000000000004 R09: 0000561d41801d30
[  614.527495] R10: 0000000000000000 R11: 0000000000000246 R12: 0000561d417f6330
[  614.527497] R13: 000014c98676d700 R14: 0000000000000d68 R15: 0000000000000d68

Relevant part of journalctl -b ( http://ix.io/1ZpI ):

Oct 21 10:38:13 panda kernel: input: Panasonic Laptop Support as /devices/virtual/input/input14
Oct 21 10:38:13 panda systemd-udevd[303]: /usr/lib/udev/rules.d/11-dm-lvm.rules:40 Invalid value for OPTIONS key, ignoring: 'event_timeout=180'
Oct 21 10:38:13 panda systemd-udevd[303]: /usr/lib/udev/rules.d/11-dm-lvm.rules:40 The line takes no effect, ignoring.
Oct 21 10:38:13 panda systemd[1]: Started udev Kernel Device Manager.
Oct 21 10:38:13 panda systemd[1]: Started Flush Journal to Persistent Storage.
Oct 21 10:38:13 panda kernel: usbcore: registered new interface driver btusb
Oct 21 10:38:13 panda kernel: mousedev: PS/2 mouse device common for all mice
Oct 21 10:38:13 panda kernel: tpm_tis 00:05: 1.2 TPM (device-id 0xB, rev-id 16)
Oct 21 10:38:13 panda systemd-udevd[329]: hidraw1: Failed to process device, ignoring: No such file or directory
Oct 21 10:38:13 panda kernel: int3402 thermal: probe of INT3402:00 failed with error -22
Oct 21 10:38:13 panda kernel: battery: ACPI: Battery Slot [BAT1] (battery present)
Oct 21 10:38:13 panda kernel: mc: Linux media interface: v0.10
Oct 21 10:38:13 panda kernel: Linux agpgart interface v0.103
Oct 21 10:38:13 panda kernel: i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
Oct 21 10:38:13 panda kernel: ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190703/utaddress-204)
Oct 21 10:38:13 panda kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 21 10:38:13 panda kernel: ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204)
Oct 21 10:38:13 panda kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 21 10:38:13 panda kernel: ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204)
Oct 21 10:38:13 panda kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 21 10:38:13 panda kernel: ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204)
Oct 21 10:38:13 panda kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 21 10:38:13 panda kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich
Oct 21 10:38:13 panda kernel: battery: ACPI: Battery Slot [BAT2] (battery present)
Oct 21 10:38:13 panda kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 21 10:38:13 panda systemd[1]: Found device SAMSUNG_MZMPC128HBFU-00000 EFI\x20System.
Oct 21 10:38:13 panda kernel: videodev: Linux video capture interface: v2.00
Oct 21 10:38:13 panda kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 21 10:38:13 panda kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Oct 21 10:38:13 panda kernel: cfg80211: failed to load regulatory.db
Oct 21 10:38:13 panda systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
Oct 21 10:38:13 panda systemd[1]: Reached target Local File Systems (Pre).
Oct 21 10:38:13 panda systemd[1]: home-stepnem-.cache.mount: Directory /home/stepnem/.cache to mount over is not empty, mounting anyway.
Oct 21 10:38:13 panda systemd[1]: Mounting /home/stepnem/.cache...
Oct 21 10:38:13 panda systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
Oct 21 10:38:13 panda systemd[1]: Starting File System Check on /dev/disk/by-uuid/5EB4-BA45...
Oct 21 10:38:13 panda systemd[1]: Mounted /home/stepnem/.cache.
Oct 21 10:38:13 panda kernel: input: PC Speaker as /devices/platform/pcspkr/input/input15
Oct 21 10:38:13 panda systemd-fsck[346]: fsck.fat 4.1 (2017-01-24)
Oct 21 10:38:13 panda systemd-fsck[346]: /dev/sda1: 352 files, 15187/130812 clusters
Oct 21 10:38:13 panda systemd[1]: Started File System Check on /dev/disk/by-uuid/5EB4-BA45.
Oct 21 10:38:13 panda systemd[1]: Mounting /boot...
Oct 21 10:38:13 panda kernel: snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
Oct 21 10:38:13 panda kernel: Intel(R) Wireless WiFi driver for Linux
Oct 21 10:38:13 panda kernel: Copyright(c) 2003- 2015 Intel Corporation
Oct 21 10:38:13 panda kernel: iwlwifi 0000:03:00.0: enabling device (0100 -> 0102)
Oct 21 10:38:13 panda kernel: iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
Oct 21 10:38:13 panda kernel: iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
Oct 21 10:38:13 panda kernel: uvcvideo: Found UVC 1.00 device USB HD Webcam (5986:0297)
Oct 21 10:38:13 panda kernel: uvcvideo: Failed to query (GET_INFO) UVC control 11 on unit 1: -32 (exp. 1).
Oct 21 10:38:13 panda kernel: uvcvideo: Failed to query (GET_INFO) UVC control 13 on unit 1: -32 (exp. 1).
Oct 21 10:38:13 panda kernel: uvcvideo 1-1.2:1.0: Entity type for entity Processing 2 was not initialized!
Oct 21 10:38:13 panda kernel: uvcvideo 1-1.2:1.0: Entity type for entity Camera 1 was not initialized!
Oct 21 10:38:13 panda kernel: uvcvideo 1-1.2:1.0: Entity type for entity Extension 4 was not initialized!
Oct 21 10:38:13 panda kernel: input: USB HD Webcam: USB HD Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input18
Oct 21 10:38:13 panda kernel: usbcore: registered new interface driver uvcvideo
Oct 21 10:38:13 panda kernel: USB Video Class driver (1.1.1)
Oct 21 10:38:13 panda kernel: int3403 thermal: probe of INT3403:00 failed with error -22
Oct 21 10:38:13 panda kernel: RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
Oct 21 10:38:13 panda kernel: RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
Oct 21 10:38:13 panda kernel: RAPL PMU: hw unit of domain package 2^-16 Joules
Oct 21 10:38:13 panda kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
Oct 21 10:38:13 panda kernel: int3403 thermal: probe of INT3403:01 failed with error -22
Oct 21 10:38:13 panda systemd-udevd[312]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 21 10:38:13 panda systemd[1]: Mounted /boot.
Oct 21 10:38:13 panda systemd[1]: Reached target Local File Systems.
Oct 21 10:38:13 panda systemd[1]: Starting Rebuild Dynamic Linker Cache...
Oct 21 10:38:13 panda systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 21 10:38:13 panda systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 21 10:38:13 panda systemd[1]: Starting Create Volatile Files and Directories...
Oct 21 10:38:13 panda kernel: int3403 thermal: probe of INT3403:02 failed with error -22
Oct 21 10:38:13 panda systemd[1]: Started Create Volatile Files and Directories.
Oct 21 10:38:13 panda systemd[1]: Starting Rebuild Journal Catalog...
Oct 21 10:38:14 panda systemd[1]: Starting Network Time Synchronization...
Oct 21 10:38:14 panda systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 21 10:38:14 panda systemd[1]: Started Rebuild Journal Catalog.
Oct 21 10:38:14 panda kernel: int3403 thermal: probe of INT3403:03 failed with error -22

Last edited by stepnem (2019-10-23 09:31:28)

stepnem

Member

Registered: 2019-08-04

Posts: 18

Re: acpi broken after system upgrade (from linux 5.3.4 to 5.3.7)

So apparently I failed to identify the real problem in my original description.

The reason of acpi being hosed (other than acpi -t and other things visible in the posted logs I was also unable to suspend/hibernate etc.) was probably "[ALPM] error: problem occurred while upgrading filesystem", i.e. the "filesystem" package failing to update properly due to 3rd party package manpages being installed in /usr/local/share/man/. Removing those, reinstalling filesystem and rebooting fixed the issue. The "error -22" etc. are still there but seem to be benign.

stepnem

Member

Registered: 2019-08-04

Posts: 18

Re: acpi broken after system upgrade (from linux 5.3.4 to 5.3.7)

In fact my second hypothesis doesn't hold, either. The problem is back, only not immediately after reboot. Investigation continues...

cfeedback

Member

From: Portland, OR

Registered: 2019-05-11

Posts: 11

Re: acpi broken after system upgrade (from linux 5.3.4 to 5.3.7)

Great dmesg, I really enjoyed it... it's like looking at one of my ivy bridge / PCH things I have lying around the house. Or the one I'm typing on now. Sadly, mine all appear to be even older and inferior to your hardware. Except for the part about not starting up... they usually do that. Sorry kt's been a long night I'm afraid I'm not being much help.

The "error -22" etc. are still there but seem to be benign.

No, I think that's probably very much part of the central issue. I'm just guessing here though. There's some sort of irq conflict, driver issue, race condition, that's causing a fan or sensor or whatever your thermal error is I didn't look up to grind everything to a halt and then your gfx card crashes. I could be remembering this all wrong though it's been a long night. I think I said that. I'd start with i915.modeset=1 i915.fastboot=1 to the cmdline (you can maybe try fbc too but that ones really not likely to help) and add i915 as the first module to your mkinitcpio.conf. get rid of xf86-intel if you have it installed. Maybe play around with lm_sensors and whatever module parameters in that area are available. acpi=noirq would be another to try. oh and acpi_enforce_resources=lax

Hope that helps a little. I look forward to reading the next chapter. I really shouldn't have spent an hour writing so little... but I got caught up in the story. That 306A9 microcode is a real winner too. Really ties the story together.

---

Design is a funny word. Some people think design means how it looks. But, of course, if you dig deeper, it’s how it really works. You have to grok what it is all about.

― S. Jobs

stepnem

Member

Registered: 2019-08-04

Posts: 18

Re: acpi broken after system upgrade (from linux 5.3.4 to 5.3.7)

Hey cfeedback, thanks for the input, I appreciate it.

Thing is, I've actually had "int3403 thermal: probe of INT3403:00 failed with error -22" in dmesg ever since I installed Arch on this machine (linux 4.13.8), but hadn't noticed any issues until now. (EDIT: the old 4.13.8 dmesg is here: https://gist.github.com/stepnem/96baf6c … cf6f62e4df )

Also, why do you think the problem is gfx related? If the graphics card crashed, wouldn't there be any visible effects? In my case, everything continues to work "fine", barred the acpi functionality like querying the thermal sensors (battery/acpi -i actually seemed to continue working) and suspend/hibernate.

I'm wary of using acpi_enforce_resources=lax, from what I understood it could do more damage than good.

I guess for the time being I'll try if linux-lts works OK for me and will continue trying future mainline kernel updates.

Last edited by stepnem (2019-10-24 10:33:18)

stepnem

Member

Registered: 2019-08-04

Posts: 18

Re: acpi broken after system upgrade (from linux 5.3.4 to 5.3.7)

Current linux-lts (4.19.80) has the same problem as 5.3.7 for me, so I'm back to 5.3.4.

loqs

Member

Registered: 2014-03-06

Posts: 19,098

Re: acpi broken after system upgrade (from linux 5.3.4 to 5.3.7)

Have you tried linux-mainline 5.4-rc4 to see if the issue has already been fixed upstream?

stepnem

Member

Registered: 2019-08-04

Posts: 18

Re: acpi broken after system upgrade (from linux 5.3.4 to 5.3.7)

Have you tried linux-mainline 5.4-rc4 to see if the issue has already been fixed upstream?

Thanks for the suggestion, but at this point I feel I have too little information and understanding of the issue to warrant compiling a kernel as opposed to just waiting for a release and hoping the issue disappears as magically as it appeared. I.e., if I found out 5.4-rc works, that'd be great, but I can just wait for the release alright. If, on the other hand, I find out 5.4-rc doesn't work, how can I actually help them fixing the issue? Do you think the information I give above is enough for an upstream bug report?