Arch Linux

carbolymer

Member

Registered: 2012-04-25

Posts: 42

No sound after upgrade

After upgrade, sound over Display Port isn't working anymore. Upgraded packages: https://pastebin.com/Wtq244Fc

$ aplay -lL
null
    Discard all samples (playback) or generate zero samples (capture)
jack
    JACK Audio Connection Kit
pulse
    PulseAudio Sound Server
default
    Default ALSA Output (currently PulseAudio Sound Server)
hdmi:CARD=HDMI,DEV=0
    HDA ATI HDMI, HDMI 0
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
    HDA ATI HDMI, HDMI 1
    HDMI Audio Output
usbstream:CARD=HDMI
    HDA ATI HDMI
    USB Stream Output
sysdefault:CARD=Generic
    HD-Audio Generic, ALC892 Analog
    Default Audio Device
front:CARD=Generic,DEV=0
    HD-Audio Generic, ALC892 Analog
    Front speakers
surround21:CARD=Generic,DEV=0
    HD-Audio Generic, ALC892 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Generic,DEV=0
    HD-Audio Generic, ALC892 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic,DEV=0
    HD-Audio Generic, ALC892 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic,DEV=0
    HD-Audio Generic, ALC892 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic,DEV=0
    HD-Audio Generic, ALC892 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic,DEV=0
    HD-Audio Generic, ALC892 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Generic,DEV=0
    HD-Audio Generic, ALC892 Digital
    IEC958 (S/PDIF) Digital Audio Output
usbstream:CARD=Generic
    HD-Audio Generic
    USB Stream Output
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA ATI HDMI], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 0: ALC892 Analog [ALC892 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 1: ALC892 Digital [ALC892 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

$ amixer -c0
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 229 [90%] [-5.20dB]
  Front Right: Playback 229 [90%] [-5.20dB]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958',1
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]

pulseaudio hangs on:

$ pulseaudio --start -vvvvv
D: [pulseaudio] conf-parser.c: Parsing configuration file '/etc/pulse/client.conf'
D: [pulseaudio] conf-parser.c: /etc/pulse/client.conf.d does not exist, ignoring.

no output from:

$ sudo fuser -v /dev/snd/*

$ pacmd list-cards ; pacmd list-sinks ; pacmd list-sink-inputs
No PulseAudio daemon running, or not running as session daemon.
No PulseAudio daemon running, or not running as session daemon.
No PulseAudio daemon running, or not running as session daemon.

These commands give no sound:

$ aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
aplay: main:828: audio open error: Device or resource busy
$ aplay -D plughw:0,7 /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono

$ lsmod | grep snd
snd_hda_codec_realtek   126976  1
snd_hda_codec_generic    94208  1 snd_hda_codec_realtek
ledtrig_audio          16384  2 snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_hdmi     65536  1
snd_hda_intel          53248  9
snd_hda_codec         159744  4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
snd_hda_core          102400  5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
snd_hwdep              20480  1 snd_hda_codec
snd_pcm               135168  6 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
snd_timer              40960  1 snd_pcm
snd                   110592  24 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm
soundcore              16384  1 snd

$ cat /etc/asound.conf
# Use PulseAudio by default
pcm.!default {
  type pulse
  fallback "sysdefault"
  hint {
    show on
    description "Default ALSA Output (currently PulseAudio Sound Server)"
  }
}

ctl.!default {
  type pulse
  fallback "sysdefault"
}

# vim:set ft=alsaconf:

I don't have HDMI output muted in alsamixer.

Pulseaudio does not work, I've tried clearing its configuration and rebooting multiple times without success (vide https://wiki.archlinux.org/index.php/Pu … tup_failed ). I have also went through https://wiki.archlinux.org/index.php/Ad … s_not_work also without success.

What am I missing here? What else can I check and fix to get my sound back?

Last edited by carbolymer (2019-10-22 20:34:34)