You are not logged in.
- Topics: Active | Unanswered
#1 2019-10-27 10:29:36
- Noeljunior
- Member
- From: Portugal
- Registered: 2016-09-02
- Posts: 9
DP (/VGA) unusable / X hangs if something connected (Intel graphics)
Hi
I have 3 monitors on the 3 outputs of an Asrock Z370-pro4: HDMI + DVI + VGA. If I connect anything to the VGA port, X won't start and changing from one tty to another may take 5 sec or so. This started after a system update around 2-3 months ago. Note that apparently at least the VGA port is connected in the end to an DP of the Z370.
I have lightdm as DM with auto login, so during the boot, when I expect to get xfce loaded after the screen blinking, I get a black screen on the 2 working outputs. the non-working VGA output keeps the screen off. If I disconnect the VGA monitor and try restart the lightdm (and X) I still get the black screen. If I don't connect it before boot, everything works fine. If I connect it after boot, nothing is detected. xrandr won't even list all the DP/VGA port.
So, the setup is working perfectly on Windows 10 and xubuntu 19.04 (live image). On xubuntu 19.10 I got the problem as on Arch. I've tried a different monitor and cable with the same result.
I've found somehow similar problems around but in the end some were solved (others abandoned) and did not solve my case, hence I'm here.
After trying a lot of different options, mostly randomly (just in case...), and waiting for some intel updates with not success, I come here to ask for help. Since I'm completely out of ideas, I'll just post some logs here.
- on xubuntu 19.10, after boot to black screen with the 3 monitors connected, I notice this *after* I remove the VGA cable and press ctrl-alt-delete to reboot:
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* failed to enable link training- /usr/var/log/Xorg.0.log
[ 10.330]
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[ 10.330] Build Operating System: Linux Arch Linux
[ 10.330] Current Operating System: Linux noelws 5.3.7-arch1-1-ARCH #1 SMP PREEMPT Fri Oct 18 00:17:03 UTC 2019 x86_64
[ 10.330] Kernel command line: root=UUID=97b8ba7a-7779-4a24-beab-1748f833b70e rw initrd=/intel-ucode.img initrd=/initramfs-linux.img resume=UUID=97b8ba7a-7779-4a24-beab-1748f833b70e resume_offset=34816 scsi_mod.use_blk_mq=1 quiet loglevel=3 rd.systemd.show_status=auto rd.udev.log-priority=3
[ 10.330] Build Date: 25 October 2019 08:43:50AM
[ 10.330]
[ 10.330] Current version of pixman: 0.38.4
[ 10.330] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10.331] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.331] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 27 09:16:10 2019
[ 10.332] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 10.332] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 10.333] (==) No Layout section. Using the first Screen section.
[ 10.333] (==) No screen section available. Using defaults.
[ 10.333] (**) |-->Screen "Default Screen Section" (0)
[ 10.333] (**) | |-->Monitor "<default monitor>"
[ 10.334] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 10.334] (**) | |-->Device "Intel Graphics"
[ 10.334] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 10.334] (==) Automatically adding devices
[ 10.334] (==) Automatically enabling devices
[ 10.334] (==) Automatically adding GPU devices
[ 10.334] (==) Automatically binding GPU devices
[ 10.334] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 10.334] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 10.334] Entry deleted from font path.
[ 10.334] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 10.334] Entry deleted from font path.
[ 10.334] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 10.334] Entry deleted from font path.
[ 10.334] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 10.334] Entry deleted from font path.
[ 10.334] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 10.334] Entry deleted from font path.
[ 10.334] (==) FontPath set to:
/usr/share/fonts/TTF
[ 10.334] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.334] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10.334] (II) Module ABI versions:
[ 10.334] X.Org ANSI C Emulation: 0.4
[ 10.334] X.Org Video Driver: 24.0
[ 10.334] X.Org XInput driver : 24.1
[ 10.334] X.Org Server Extension : 10.0
[ 10.336] (++) using VT number 7
[ 10.336] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 10.337] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 12.595] (--) PCI:*(0@0:2:0) 8086:3e92:1849:3e92 rev 0, Mem @ 0xde000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 12.595] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 12.595] (II) LoadModule: "glx"
[ 12.610] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12.616] (II) Module glx: vendor="X.Org Foundation"
[ 12.616] compiled for 1.20.5, module version = 1.0.0
[ 12.616] ABI class: X.Org Server Extension, version 10.0
[ 12.616] (II) LoadModule: "intel"
[ 12.616] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 12.617] (II) Module intel: vendor="X.Org Foundation"
[ 12.617] compiled for 1.20.5, module version = 2.99.917
[ 12.617] Module class: X.Org Video Driver
[ 12.617] ABI class: X.Org Video Driver, version 24.0
[ 12.617] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 12.618] (II) intel: Driver for Intel(R) HD Graphics
[ 12.618] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 12.618] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 13.773] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20190619
[ 13.773] (II) intel(0): SNA compiled from 2.99.917-893-gbff5eca4
[ 13.790] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 13.790] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 6 threads
[ 13.790] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.790] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 13.790] (==) intel(0): RGB weight 888
[ 13.790] (==) intel(0): Default visual is TrueColor
[ 13.817] (II) intel(0): Output eDP1 has no monitor section
[ 13.818] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 13.818] (II) intel(0): Enabled output eDP1
[ 13.818] (II) intel(0): Output HDMI1 has no monitor section
[ 13.818] (II) intel(0): Enabled output HDMI1
[ 13.818] (II) intel(0): Output HDMI2 has no monitor section
[ 13.819] (II) intel(0): Enabled output HDMI2
[ 13.819] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 13.819] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 13.819] (II) intel(0): Enabled output VIRTUAL1
[ 13.819] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 13.819] (--) intel(0): Output HDMI1 using initial mode 2560x1080 on pipe 1
[ 13.819] (--) intel(0): Output HDMI2 using initial mode 1920x1080 on pipe 2
[ 13.820] (==) intel(0): TearFree enabled
[ 13.820] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.820] (==) intel(0): DPI set to (96, 96)
[ 13.820] (II) Loading sub module "dri3"
[ 13.820] (II) LoadModule: "dri3"
[ 13.820] (II) Module "dri3" already built-in
[ 13.820] (II) Loading sub module "dri2"
[ 13.820] (II) LoadModule: "dri2"
[ 13.820] (II) Module "dri2" already built-in
[ 13.820] (II) Loading sub module "present"
[ 13.820] (II) LoadModule: "present"
[ 13.820] (II) Module "present" already built-in
[ 13.822] (II) intel(0): SNA initialized with Coffeelake (gen9) backend
[ 13.822] (==) intel(0): Backing store enabled
[ 13.822] (==) intel(0): Silken mouse disabled
[ 13.822] (II) intel(0): HW Cursor enabled
[ 13.823] (==) intel(0): DPMS enabled
[ 13.823] (==) intel(0): Display hotplug detection enabled
[ 13.823] (II) intel(0): [DRI2] Setup complete
[ 13.823] (II) intel(0): [DRI2] DRI driver: i965
[ 13.823] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 13.823] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 13.823] (II) intel(0): hardware support for Present enabled
[ 13.823] (II) Initializing extension Generic Event Extension
[ 13.824] (II) Initializing extension SHAPE
[ 13.824] (II) Initializing extension MIT-SHM
[ 13.824] (II) Initializing extension XInputExtension
[ 13.825] (II) Initializing extension XTEST
[ 13.825] (II) Initializing extension BIG-REQUESTS
[ 13.825] (II) Initializing extension SYNC
[ 13.826] (II) Initializing extension XKEYBOARD
[ 13.826] (II) Initializing extension XC-MISC
[ 13.826] (II) Initializing extension SECURITY
[ 13.827] (II) Initializing extension XFIXES
[ 13.827] (II) Initializing extension RENDER
[ 13.827] (II) Initializing extension RANDR
[ 13.828] (II) Initializing extension COMPOSITE
[ 13.828] (II) Initializing extension DAMAGE
[ 13.829] (II) Initializing extension MIT-SCREEN-SAVER
[ 13.829] (II) Initializing extension DOUBLE-BUFFER
[ 13.829] (II) Initializing extension RECORD
[ 13.830] (II) Initializing extension DPMS
[ 13.830] (II) Initializing extension Present
[ 13.830] (II) Initializing extension DRI3
[ 13.830] (II) Initializing extension X-Resource
[ 13.831] (II) Initializing extension XVideo
[ 13.831] (II) Initializing extension XVideo-MotionCompensation
[ 13.831] (II) Initializing extension GLX
[ 13.867] (II) AIGLX: Loaded and initialized i965
[ 13.867] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 13.867] (II) Initializing extension XFree86-VidModeExtension
[ 13.867] (II) Initializing extension XFree86-DGA
[ 13.867] (II) Initializing extension XFree86-DRI
[ 13.867] (II) Initializing extension DRI2
[ 13.873] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 13.883] (II) intel(0): switch to mode 2560x1080@60.0 on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 13.897] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI2 using pipe 2, position (0, 0), rotation normal, reflection none
[ 13.898] (II) intel(0): Setting screen physical size to 677 x 285
[ 13.938] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 13.938] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 13.938] (**) Power Button: Applying InputClass "system-keyboard"
[ 13.938] (II) LoadModule: "libinput"
[ 13.938] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 13.942] (II) Module libinput: vendor="X.Org Foundation"
[ 13.942] compiled for 1.20.5, module version = 0.29.0
[ 13.942] Module class: X.Org XInput Driver
[ 13.942] ABI class: X.Org XInput driver, version 24.1
[ 13.942] (II) Using input driver 'libinput' for 'Power Button'
[ 13.942] (**) Power Button: always reports core events
[ 13.942] (**) Option "Device" "/dev/input/event2"
[ 13.942] (**) Option "_source" "server/udev"
[ 13.947] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 13.947] (II) event2 - Power Button: device is a keyboard
[ 13.947] (II) event2 - Power Button: device removed
[ 13.979] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 13.979] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 13.979] (**) Option "xkb_model" "pc104"
[ 13.979] (**) Option "xkb_layout" "pt"
[ 13.998] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 13.998] (II) event2 - Power Button: device is a keyboard
[ 13.998] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 13.998] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 13.998] (**) Video Bus: Applying InputClass "system-keyboard"
[ 13.998] (II) Using input driver 'libinput' for 'Video Bus'
[ 13.998] (**) Video Bus: always reports core events
[ 13.998] (**) Option "Device" "/dev/input/event3"
[ 13.998] (**) Option "_source" "server/udev"
[ 13.998] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 13.998] (II) event3 - Video Bus: device is a keyboard
[ 13.999] (II) event3 - Video Bus: device removed
[ 14.086] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[ 14.086] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 14.086] (**) Option "xkb_model" "pc104"
[ 14.086] (**) Option "xkb_layout" "pt"
[ 14.089] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 14.089] (II) event3 - Video Bus: device is a keyboard
[ 14.090] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 14.090] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 14.090] (**) Power Button: Applying InputClass "system-keyboard"
[ 14.090] (II) Using input driver 'libinput' for 'Power Button'
[ 14.091] (**) Power Button: always reports core events
[ 14.091] (**) Option "Device" "/dev/input/event1"
[ 14.091] (**) Option "_source" "server/udev"
[ 14.093] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 14.093] (II) event1 - Power Button: device is a keyboard
[ 14.093] (II) event1 - Power Button: device removed
[ 14.126] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 14.126] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 14.126] (**) Option "xkb_model" "pc104"
[ 14.126] (**) Option "xkb_layout" "pt"
[ 14.129] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 14.129] (II) event1 - Power Button: device is a keyboard
[ 14.130] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 14.130] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 14.130] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 14.130] (II) Using input driver 'libinput' for 'Sleep Button'
[ 14.130] (**) Sleep Button: always reports core events
[ 14.130] (**) Option "Device" "/dev/input/event0"
[ 14.130] (**) Option "_source" "server/udev"
[ 14.133] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 14.133] (II) event0 - Sleep Button: device is a keyboard
[ 14.133] (II) event0 - Sleep Button: device removed
[ 14.166] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 14.166] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 14.166] (**) Option "xkb_model" "pc104"
[ 14.166] (**) Option "xkb_layout" "pt"
[ 14.169] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 14.169] (II) event0 - Sleep Button: device is a keyboard
[ 14.172] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event4)
[ 14.172] (**) Logitech Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 14.172] (**) Logitech Logitech USB Keyboard: Applying InputClass "system-keyboard"
[ 14.172] (II) Using input driver 'libinput' for 'Logitech Logitech USB Keyboard'
[ 14.172] (**) Logitech Logitech USB Keyboard: always reports core events
[ 14.172] (**) Option "Device" "/dev/input/event4"
[ 14.172] (**) Option "_source" "server/udev"
[ 14.175] (II) event4 - Logitech Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 14.176] (II) event4 - Logitech Logitech USB Keyboard: device is a keyboard
[ 14.176] (II) event4 - Logitech Logitech USB Keyboard: device removed
[ 14.206] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C316.0001/input/input4/event4"
[ 14.206] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 14.206] (**) Option "xkb_model" "pc104"
[ 14.206] (**) Option "xkb_layout" "pt"
[ 14.210] (II) event4 - Logitech Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 14.210] (II) event4 - Logitech Logitech USB Keyboard: device is a keyboard
[ 14.212] (II) config/udev: Adding input device Logitech Logitech USB Keyboard Consumer Control (/dev/input/event5)
[ 14.212] (**) Logitech Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 14.212] (**) Logitech Logitech USB Keyboard Consumer Control: Applying InputClass "system-keyboard"
[ 14.212] (II) Using input driver 'libinput' for 'Logitech Logitech USB Keyboard Consumer Control'
[ 14.213] (**) Logitech Logitech USB Keyboard Consumer Control: always reports core events
[ 14.213] (**) Option "Device" "/dev/input/event5"
[ 14.213] (**) Option "_source" "server/udev"
[ 14.216] (II) event5 - Logitech Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard Joystick
[ 14.216] (II) event5 - Logitech Logitech USB Keyboard Consumer Control: device is a keyboard
[ 14.217] (II) event5 - Logitech Logitech USB Keyboard Consumer Control: device removed
[ 14.273] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C316.0002/input/input5/event5"
[ 14.273] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 11)
[ 14.273] (**) Option "xkb_model" "pc104"
[ 14.273] (**) Option "xkb_layout" "pt"
[ 14.277] (II) event5 - Logitech Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard Joystick
[ 14.277] (II) event5 - Logitech Logitech USB Keyboard Consumer Control: device is a keyboard
[ 14.279] (II) config/udev: Adding input device Logitech Logitech USB Keyboard System Control (/dev/input/event6)
[ 14.279] (**) Logitech Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[ 14.279] (**) Logitech Logitech USB Keyboard System Control: Applying InputClass "system-keyboard"
[ 14.279] (II) Using input driver 'libinput' for 'Logitech Logitech USB Keyboard System Control'
[ 14.279] (**) Logitech Logitech USB Keyboard System Control: always reports core events
[ 14.279] (**) Option "Device" "/dev/input/event6"
[ 14.279] (**) Option "_source" "server/udev"
[ 14.283] (II) event6 - Logitech Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[ 14.283] (II) event6 - Logitech Logitech USB Keyboard System Control: device is a keyboard
[ 14.283] (II) event6 - Logitech Logitech USB Keyboard System Control: device removed
[ 14.313] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C316.0002/input/input6/event6"
[ 14.313] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard System Control" (type: KEYBOARD, id 12)
[ 14.313] (**) Option "xkb_model" "pc104"
[ 14.313] (**) Option "xkb_layout" "pt"
[ 14.317] (II) event6 - Logitech Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[ 14.317] (II) event6 - Logitech Logitech USB Keyboard System Control: device is a keyboard
[ 14.318] (II) config/udev: Adding input device Razer Razer Copperhead Laser Mouse (/dev/input/event7)
[ 14.318] (**) Razer Razer Copperhead Laser Mouse: Applying InputClass "libinput pointer catchall"
[ 14.318] (II) Using input driver 'libinput' for 'Razer Razer Copperhead Laser Mouse'
[ 14.318] (**) Razer Razer Copperhead Laser Mouse: always reports core events
[ 14.318] (**) Option "Device" "/dev/input/event7"
[ 14.318] (**) Option "_source" "server/udev"
[ 14.374] (II) event7 - Razer Razer Copperhead Laser Mouse: is tagged by udev as: Mouse
[ 14.375] (II) event7 - Razer Razer Copperhead Laser Mouse: device is a pointer
[ 14.375] (II) event7 - Razer Razer Copperhead Laser Mouse: device removed
[ 14.433] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:1532:0101.0003/input/input7/event7"
[ 14.433] (II) XINPUT: Adding extended input device "Razer Razer Copperhead Laser Mouse" (type: MOUSE, id 13)
[ 14.433] (**) Option "AccelerationScheme" "none"
[ 14.433] (**) Razer Razer Copperhead Laser Mouse: (accel) selected scheme none/0
[ 14.433] (**) Razer Razer Copperhead Laser Mouse: (accel) acceleration factor: 2.000
[ 14.433] (**) Razer Razer Copperhead Laser Mouse: (accel) acceleration threshold: 4
[ 14.492] (II) event7 - Razer Razer Copperhead Laser Mouse: is tagged by udev as: Mouse
[ 14.493] (II) event7 - Razer Razer Copperhead Laser Mouse: device is a pointer
[ 14.495] (II) config/udev: Adding input device Razer Razer Copperhead Laser Mouse (/dev/input/mouse0)
[ 14.495] (II) No input driver specified, ignoring this device.
[ 14.495] (II) This device may have been added with another device file.
[ 14.497] (II) config/udev: Adding input device Razer Razer Copperhead Laser Mouse (/dev/input/event8)
[ 14.497] (**) Razer Razer Copperhead Laser Mouse: Applying InputClass "libinput keyboard catchall"
[ 14.497] (**) Razer Razer Copperhead Laser Mouse: Applying InputClass "system-keyboard"
[ 14.497] (II) Using input driver 'libinput' for 'Razer Razer Copperhead Laser Mouse'
[ 14.497] (**) Razer Razer Copperhead Laser Mouse: always reports core events
[ 14.497] (**) Option "Device" "/dev/input/event8"
[ 14.497] (**) Option "_source" "server/udev"
[ 14.501] (II) event8 - Razer Razer Copperhead Laser Mouse: is tagged by udev as: Keyboard
[ 14.501] (II) event8 - Razer Razer Copperhead Laser Mouse: device is a keyboard
[ 14.502] (II) event8 - Razer Razer Copperhead Laser Mouse: device removed
[ 14.526] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:1532:0101.0004/input/input8/event8"
[ 14.526] (II) XINPUT: Adding extended input device "Razer Razer Copperhead Laser Mouse" (type: KEYBOARD, id 14)
[ 14.526] (**) Option "xkb_model" "pc104"
[ 14.526] (**) Option "xkb_layout" "pt"
[ 14.530] (II) event8 - Razer Razer Copperhead Laser Mouse: is tagged by udev as: Keyboard
[ 14.530] (II) event8 - Razer Razer Copperhead Laser Mouse: device is a keyboard
[ 14.531] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
[ 14.531] (II) No input driver specified, ignoring this device.
[ 14.531] (II) This device may have been added with another device file.
[ 14.531] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)
[ 14.531] (II) No input driver specified, ignoring this device.
[ 14.531] (II) This device may have been added with another device file.
[ 14.531] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event12)
[ 14.531] (II) No input driver specified, ignoring this device.
[ 14.531] (II) This device may have been added with another device file.
[ 14.532] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[ 14.532] (II) No input driver specified, ignoring this device.
[ 14.532] (II) This device may have been added with another device file.
[ 14.532] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 14.532] (II) No input driver specified, ignoring this device.
[ 14.532] (II) This device may have been added with another device file.
[ 14.532] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[ 14.532] (II) No input driver specified, ignoring this device.
[ 14.532] (II) This device may have been added with another device file.
[ 14.532] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[ 14.532] (II) No input driver specified, ignoring this device.
[ 14.532] (II) This device may have been added with another device file.
[ 14.532] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event17)
[ 14.532] (II) No input driver specified, ignoring this device.
[ 14.532] (II) This device may have been added with another device file.
[ 14.532] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event18)
[ 14.532] (II) No input driver specified, ignoring this device.
[ 14.532] (II) This device may have been added with another device file.
[ 14.533] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[ 14.533] (II) No input driver specified, ignoring this device.
[ 14.533] (II) This device may have been added with another device file.
[ 16.782] (II) intel(0): EDID vendor "HJW", prod id 0
[ 16.783] (II) intel(0): Using EDID range info for horizontal sync
[ 16.783] (II) intel(0): Using EDID range info for vertical refresh
[ 16.783] (II) intel(0): Printing DDC gathered Modelines:
[ 16.783] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 16.783] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.783] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 16.783] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.783] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 16.783] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 16.783] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 16.783] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.783] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 16.783] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 16.783] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 16.783] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.783] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.783] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 16.783] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 16.783] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 16.783] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 30.583] (II) event2 - Power Button: device removed
[ 30.598] (II) event3 - Video Bus: device removed
[ 30.659] (II) event1 - Power Button: device removed
[ 30.686] (II) event0 - Sleep Button: device removed
[ 30.713] (II) event4 - Logitech Logitech USB Keyboard: device removed
[ 30.739] (II) event5 - Logitech Logitech USB Keyboard Consumer Control: device removed
[ 30.793] (II) event6 - Logitech Logitech USB Keyboard System Control: device removed
[ 30.819] (II) event7 - Razer Razer Copperhead Laser Mouse: device removed
[ 30.873] (II) event8 - Razer Razer Copperhead Laser Mouse: device removed
[ 30.899] (II) AIGLX: Suspending AIGLX clients for VT switch- ~/.local/share/xorg/Xorg.0.log
[ 11.373] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 11.373]
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[ 11.373] Build Operating System: Linux Arch Linux
[ 11.373] Current Operating System: Linux noelws 5.3.0-arch1-1-ARCH #1 SMP PREEMPT Mon Sep 16 03:29:01 UTC 2019 x86_64
[ 11.373] Kernel command line: root=UUID=97b8ba7a-7779-4a24-beab-1748f833b70e rw initrd=/intel-ucode.img initrd=/initramfs-linux.img resume=UUID=97b8ba7a-7779-4a24-beab-1748f833b70e resume_offset=34816 scsi_mod.use_blk_mq=1 quiet loglevel=3 rd.systemd.show_status=auto rd.udev.log-priority=3
[ 11.374] Build Date: 30 June 2019 09:52:01AM
[ 11.374]
[ 11.374] Current version of pixman: 0.38.4
[ 11.374] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.374] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.374] (==) Log file: "/home/liam/.local/share/xorg/Xorg.0.log", Time: Sat Sep 21 16:10:53 2019
[ 11.374] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.374] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11.375] (==) No Layout section. Using the first Screen section.
[ 11.375] (==) No screen section available. Using defaults.
[ 11.375] (**) |-->Screen "Default Screen Section" (0)
[ 11.375] (**) | |-->Monitor "<default monitor>"
[ 11.375] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 11.375] (**) | |-->Device "Intel Graphics"
[ 11.375] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11.375] (==) Automatically adding devices
[ 11.375] (==) Automatically enabling devices
[ 11.375] (==) Automatically adding GPU devices
[ 11.375] (==) Automatically binding GPU devices
[ 11.375] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 11.375] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 11.375] Entry deleted from font path.
[ 11.375] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 11.375] Entry deleted from font path.
[ 11.375] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 11.375] Entry deleted from font path.
[ 11.375] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 11.375] Entry deleted from font path.
[ 11.375] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 11.375] Entry deleted from font path.
[ 11.375] (==) FontPath set to:
/usr/share/fonts/TTF
[ 11.375] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.375] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11.375] (II) Module ABI versions:
[ 11.375] X.Org ANSI C Emulation: 0.4
[ 11.375] X.Org Video Driver: 24.0
[ 11.375] X.Org XInput driver : 24.1
[ 11.375] X.Org Server Extension : 10.0
[ 11.376] (++) using VT number 1
[ 11.376] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 11.377] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 11.378] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11.378] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 11.380] (--) PCI:*(0@0:2:0) 8086:3e92:1849:3e92 rev 0, Mem @ 0xde000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 11.380] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11.380] (II) LoadModule: "glx"
[ 11.380] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.386] (II) Module glx: vendor="X.Org Foundation"
[ 11.386] compiled for 1.20.5, module version = 1.0.0
[ 11.386] ABI class: X.Org Server Extension, version 10.0
[ 11.386] (II) LoadModule: "intel"
[ 11.386] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 11.388] (II) Module intel: vendor="X.Org Foundation"
[ 11.388] compiled for 1.20.5, module version = 2.99.917
[ 11.388] Module class: X.Org Video Driver
[ 11.388] ABI class: X.Org Video Driver, version 24.0
[ 11.388] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 11.388] (II) intel: Driver for Intel(R) HD Graphics
[ 11.388] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 11.388] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 11.388] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 11.388] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 11.388] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 11.388] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 11.388] (==) intel(0): RGB weight 888
[ 11.388] (==) intel(0): Default visual is TrueColor
[ 11.388] (**) intel(0): Option "AccelMethod" "uxa"
[ 11.388] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 11.389] (**) intel(0): Relaxed fencing enabled
[ 11.389] (**) intel(0): Wait on SwapBuffers? enabled
[ 11.389] (**) intel(0): Triple buffering? enabled
[ 11.389] (**) intel(0): Framebuffer tiled
[ 11.389] (**) intel(0): Pixmaps tiled
[ 11.389] (**) intel(0): 3D buffers tiled
[ 11.389] (**) intel(0): SwapBuffers wait enabled
[ 11.389] (==) intel(0): video overlay key set to 0x101fe
[ 11.393] (II) intel(0): Output HDMI1 has no monitor section
[ 11.407] (II) intel(0): Output HDMI2 has no monitor section
[ 11.411] (II) intel(0): EDID for output HDMI1
[ 11.425] (II) intel(0): EDID for output HDMI2
[ 11.425] (II) intel(0): Manufacturer: ACI Model: 23f9 Serial#: 16843009
[ 11.425] (II) intel(0): Year: 2012 Week: 25
[ 11.425] (II) intel(0): EDID Version: 1.3
[ 11.425] (II) intel(0): Digital Display Input
[ 11.425] (II) intel(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 11.425] (II) intel(0): Gamma: 2.20
[ 11.425] (II) intel(0): DPMS capabilities: Off
[ 11.425] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 11.425] (II) intel(0): Default color space is primary color space
[ 11.425] (II) intel(0): First detailed timing is preferred mode
[ 11.425] (II) intel(0): redX: 0.640 redY: 0.349 greenX: 0.284 greenY: 0.617
[ 11.425] (II) intel(0): blueX: 0.142 blueY: 0.067 whiteX: 0.313 whiteY: 0.329
[ 11.425] (II) intel(0): Supported established timings:
[ 11.425] (II) intel(0): 720x400@70Hz
[ 11.425] (II) intel(0): 640x480@60Hz
[ 11.425] (II) intel(0): 640x480@67Hz
[ 11.425] (II) intel(0): 640x480@72Hz
[ 11.425] (II) intel(0): 640x480@75Hz
[ 11.425] (II) intel(0): 800x600@56Hz
[ 11.425] (II) intel(0): 800x600@60Hz
[ 11.425] (II) intel(0): 800x600@72Hz
[ 11.425] (II) intel(0): 800x600@75Hz
[ 11.425] (II) intel(0): 832x624@75Hz
[ 11.425] (II) intel(0): 1024x768@60Hz
[ 11.425] (II) intel(0): 1024x768@70Hz
[ 11.425] (II) intel(0): 1024x768@75Hz
[ 11.425] (II) intel(0): 1280x1024@75Hz
[ 11.425] (II) intel(0): 1152x864@75Hz
[ 11.426] (II) intel(0): Manufacturer's mask: 0
[ 11.426] (II) intel(0): Supported standard timings:
[ 11.426] (II) intel(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 11.426] (II) intel(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 11.426] (II) intel(0): #2: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 11.426] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 11.426] (II) intel(0): #4: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[ 11.426] (II) intel(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 11.426] (II) intel(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 11.426] (II) intel(0): #7: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 11.426] (II) intel(0): Supported detailed timing:
[ 11.426] (II) intel(0): clock: 148.5 MHz Image Size: 509 x 286 mm
[ 11.426] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 11.426] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 11.426] (II) intel(0): Serial No: C6LMFK016827
[ 11.426] (II) intel(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 85 kHz, PixClock max 195 MHz
[ 11.426] (II) intel(0): Monitor name: ASUS VH238
[ 11.426] (II) intel(0): EDID (in hex):
[ 11.426] (II) intel(0): 00ffffffffffff000469f92301010101
[ 11.426] (II) intel(0): 1916010380331d782edc55a359489e24
[ 11.426] (II) intel(0): 115054bfef80d1c0b300a94095009040
[ 11.426] (II) intel(0): 81808140714f023a801871382d40582c
[ 11.426] (II) intel(0): 4500fd1e1100001f000000ff0043364c
[ 11.426] (II) intel(0): 4d464b3031363832370a000000fd0037
[ 11.426] (II) intel(0): 4b1e5513000a202020202020000000fc
[ 11.426] (II) intel(0): 00415355532056483233380a20200014
[ 11.426] (II) intel(0): Printing probed modes for output HDMI2
[ 11.426] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 11.426] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 11.426] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 11.426] (II) intel(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[ 11.426] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 11.426] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 11.426] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 11.426] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 11.426] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 11.426] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 11.426] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 11.426] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11.426] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 11.426] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 11.426] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 11.426] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11.426] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 11.426] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 11.426] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 11.426] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 11.426] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11.426] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 11.426] (II) intel(0): Output HDMI1 disconnected
[ 11.426] (II) intel(0): Output HDMI2 connected
[ 11.426] (II) intel(0): Using exact sizes for initial modes
[ 11.426] (II) intel(0): Output HDMI2 using initial mode 1920x1080 +0+0
[ 11.426] (II) intel(0): Kernel page flipping support detected, enabling
[ 11.426] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11.426] (==) intel(0): DPI set to (96, 96)
[ 11.426] (II) Loading sub module "fb"
[ 11.426] (II) LoadModule: "fb"
[ 11.427] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11.427] (II) Module fb: vendor="X.Org Foundation"
[ 11.427] compiled for 1.20.5, module version = 1.0.0
[ 11.427] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.427] (II) Loading sub module "dri2"
[ 11.427] (II) LoadModule: "dri2"
[ 11.427] (II) Module "dri2" already built-in
[ 11.427] (II) Loading sub module "dri3"
[ 11.428] (II) LoadModule: "dri3"
[ 11.428] (II) Module "dri3" already built-in
[ 11.428] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 11.428] (II) UXA(0): Driver registered support for the following operations:
[ 11.428] (II) solid
[ 11.428] (II) copy
[ 11.428] (II) put_image
[ 11.428] (II) get_image
[ 11.428] (II) intel(0): [DRI2] Setup complete
[ 11.429] (II) intel(0): [DRI2] DRI driver: i965
[ 11.429] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 11.429] (==) intel(0): Backing store enabled
[ 11.429] (==) intel(0): Silken mouse disabled
[ 11.429] (II) intel(0): Initializing HW Cursor
[ 11.429] (==) intel(0): DPMS enabled
[ 11.430] (==) intel(0): Intel XvMC decoder enabled
[ 11.430] (WW) intel(0): Disabling Xv because no adaptors could be initialized.
[ 11.430] (II) intel(0): DRI2: Enabled
[ 11.430] (II) intel(0): DRI3: Enabled
[ 11.430] (==) intel(0): hotplug detection: "enabled"
[ 11.459] (II) Initializing extension Generic Event Extension
[ 11.459] (II) Initializing extension SHAPE
[ 11.459] (II) Initializing extension MIT-SHM
[ 11.459] (II) Initializing extension XInputExtension
[ 11.459] (II) Initializing extension XTEST
[ 11.459] (II) Initializing extension BIG-REQUESTS
[ 11.459] (II) Initializing extension SYNC
[ 11.459] (II) Initializing extension XKEYBOARD
[ 11.459] (II) Initializing extension XC-MISC
[ 11.459] (II) Initializing extension SECURITY
[ 11.459] (II) Initializing extension XFIXES
[ 11.459] (II) Initializing extension RENDER
[ 11.459] (II) Initializing extension RANDR
[ 11.459] (II) Initializing extension COMPOSITE
[ 11.459] (II) Initializing extension DAMAGE
[ 11.459] (II) Initializing extension MIT-SCREEN-SAVER
[ 11.459] (II) Initializing extension DOUBLE-BUFFER
[ 11.459] (II) Initializing extension RECORD
[ 11.459] (II) Initializing extension DPMS
[ 11.459] (II) Initializing extension Present
[ 11.459] (II) Initializing extension DRI3
[ 11.459] (II) Initializing extension X-Resource
[ 11.459] (II) Initializing extension XVideo
[ 11.459] (II) Initializing extension XVideo-MotionCompensation
[ 11.459] (II) Initializing extension GLX
[ 11.477] (II) AIGLX: Loaded and initialized i965
[ 11.477] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 11.477] (II) Initializing extension XFree86-VidModeExtension
[ 11.477] (II) Initializing extension XFree86-DGA
[ 11.477] (II) Initializing extension XFree86-DRI
[ 11.477] (II) Initializing extension DRI2
[ 11.477] (II) intel(0): Setting screen physical size to 508 x 285
[ 11.509] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 11.509] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 11.509] (**) Power Button: Applying InputClass "system-keyboard"
[ 11.509] (II) LoadModule: "libinput"
[ 11.509] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 11.511] (II) Module libinput: vendor="X.Org Foundation"
[ 11.511] compiled for 1.20.5, module version = 0.29.0
[ 11.511] Module class: X.Org XInput Driver
[ 11.511] ABI class: X.Org XInput driver, version 24.1
[ 11.511] (II) Using input driver 'libinput' for 'Power Button'
[ 11.512] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 13 paused 0
[ 11.512] (**) Power Button: always reports core events
[ 11.512] (**) Option "Device" "/dev/input/event2"
[ 11.512] (**) Option "_source" "server/udev"
[ 11.516] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 11.516] (II) event2 - Power Button: device is a keyboard
[ 11.516] (II) event2 - Power Button: device removed
[ 11.516] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 11.516] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 11.516] (**) Option "xkb_model" "pc104"
[ 11.516] (**) Option "xkb_layout" "pt"
[ 11.526] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 11.526] (II) event2 - Power Button: device is a keyboard
[ 11.526] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 11.526] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 11.526] (**) Video Bus: Applying InputClass "system-keyboard"
[ 11.526] (II) Using input driver 'libinput' for 'Video Bus'
[ 11.526] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 16 paused 0
[ 11.526] (**) Video Bus: always reports core events
[ 11.526] (**) Option "Device" "/dev/input/event6"
[ 11.526] (**) Option "_source" "server/udev"
[ 11.527] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 11.527] (II) event6 - Video Bus: device is a keyboard
[ 11.527] (II) event6 - Video Bus: device removed
[ 11.527] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event6"
[ 11.527] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 11.527] (**) Option "xkb_model" "pc104"
[ 11.527] (**) Option "xkb_layout" "pt"
[ 11.527] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 11.527] (II) event6 - Video Bus: device is a keyboard
[ 11.528] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 11.528] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 11.528] (**) Power Button: Applying InputClass "system-keyboard"
[ 11.528] (II) Using input driver 'libinput' for 'Power Button'
[ 11.528] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 17 paused 0
[ 11.528] (**) Power Button: always reports core events
[ 11.528] (**) Option "Device" "/dev/input/event1"
[ 11.528] (**) Option "_source" "server/udev"
[ 11.528] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 11.528] (II) event1 - Power Button: device is a keyboard
[ 11.528] (II) event1 - Power Button: device removed
[ 11.528] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 11.528] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 11.528] (**) Option "xkb_model" "pc104"
[ 11.529] (**) Option "xkb_layout" "pt"
[ 11.529] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 11.529] (II) event1 - Power Button: device is a keyboard
[ 11.529] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 11.529] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 11.529] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 11.529] (II) Using input driver 'libinput' for 'Sleep Button'
[ 11.530] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 18 paused 0
[ 11.530] (**) Sleep Button: always reports core events
[ 11.530] (**) Option "Device" "/dev/input/event0"
[ 11.530] (**) Option "_source" "server/udev"
[ 11.530] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 11.530] (II) event0 - Sleep Button: device is a keyboard
[ 11.530] (II) event0 - Sleep Button: device removed
[ 11.530] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 11.530] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 11.530] (**) Option "xkb_model" "pc104"
[ 11.530] (**) Option "xkb_layout" "pt"
[ 11.531] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 11.531] (II) event0 - Sleep Button: device is a keyboard
[ 11.531] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event3)
[ 11.531] (**) Logitech Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 11.531] (**) Logitech Logitech USB Keyboard: Applying InputClass "system-keyboard"
[ 11.531] (II) Using input driver 'libinput' for 'Logitech Logitech USB Keyboard'
[ 11.532] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 19 paused 0
[ 11.532] (**) Logitech Logitech USB Keyboard: always reports core events
[ 11.532] (**) Option "Device" "/dev/input/event3"
[ 11.532] (**) Option "_source" "server/udev"
[ 11.532] (II) event3 - Logitech Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 11.532] (II) event3 - Logitech Logitech USB Keyboard: device is a keyboard
[ 11.532] (II) event3 - Logitech Logitech USB Keyboard: device removed
[ 11.532] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C316.0001/input/input5/event3"
[ 11.532] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 11.532] (**) Option "xkb_model" "pc104"
[ 11.532] (**) Option "xkb_layout" "pt"
[ 11.533] (II) event3 - Logitech Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 11.533] (II) event3 - Logitech Logitech USB Keyboard: device is a keyboard
[ 11.533] (II) config/udev: Adding input device Logitech Logitech USB Keyboard Consumer Control (/dev/input/event4)
[ 11.533] (**) Logitech Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 11.533] (**) Logitech Logitech USB Keyboard Consumer Control: Applying InputClass "system-keyboard"
[ 11.533] (II) Using input driver 'libinput' for 'Logitech Logitech USB Keyboard Consumer Control'
[ 11.534] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 20 paused 0
[ 11.534] (**) Logitech Logitech USB Keyboard Consumer Control: always reports core events
[ 11.534] (**) Option "Device" "/dev/input/event4"
[ 11.534] (**) Option "_source" "server/udev"
[ 11.534] (II) event4 - Logitech Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard Joystick
[ 11.534] (II) event4 - Logitech Logitech USB Keyboard Consumer Control: device is a keyboard
[ 11.534] (II) event4 - Logitech Logitech USB Keyboard Consumer Control: device removed
[ 11.534] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C316.0002/input/input6/event4"
[ 11.535] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 11)
[ 11.535] (**) Option "xkb_model" "pc104"
[ 11.535] (**) Option "xkb_layout" "pt"
[ 11.535] (II) event4 - Logitech Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard Joystick
[ 11.535] (II) event4 - Logitech Logitech USB Keyboard Consumer Control: device is a keyboard
[ 11.536] (II) config/udev: Adding input device Logitech Logitech USB Keyboard System Control (/dev/input/event5)
[ 11.536] (**) Logitech Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[ 11.536] (**) Logitech Logitech USB Keyboard System Control: Applying InputClass "system-keyboard"
[ 11.536] (II) Using input driver 'libinput' for 'Logitech Logitech USB Keyboard System Control'
[ 11.536] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 21 paused 0
[ 11.536] (**) Logitech Logitech USB Keyboard System Control: always reports core events
[ 11.536] (**) Option "Device" "/dev/input/event5"
[ 11.536] (**) Option "_source" "server/udev"
[ 11.537] (II) event5 - Logitech Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[ 11.537] (II) event5 - Logitech Logitech USB Keyboard System Control: device is a keyboard
[ 11.537] (II) event5 - Logitech Logitech USB Keyboard System Control: device removed
[ 11.537] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C316.0002/input/input7/event5"
[ 11.537] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard System Control" (type: KEYBOARD, id 12)
[ 11.537] (**) Option "xkb_model" "pc104"
[ 11.537] (**) Option "xkb_layout" "pt"
[ 11.537] (II) event5 - Logitech Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[ 11.537] (II) event5 - Logitech Logitech USB Keyboard System Control: device is a keyboard
[ 11.538] (II) config/udev: Adding input device Razer Razer Copperhead Laser Mouse (/dev/input/event17)
[ 11.538] (**) Razer Razer Copperhead Laser Mouse: Applying InputClass "libinput pointer catchall"
[ 11.538] (II) Using input driver 'libinput' for 'Razer Razer Copperhead Laser Mouse'
[ 11.594] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 22 paused 0
[ 11.594] (**) Razer Razer Copperhead Laser Mouse: always reports core events
[ 11.594] (**) Option "Device" "/dev/input/event17"
[ 11.594] (**) Option "_source" "server/udev"
[ 11.596] (II) event17 - Razer Razer Copperhead Laser Mouse: is tagged by udev as: Mouse
[ 11.596] (II) event17 - Razer Razer Copperhead Laser Mouse: device is a pointer
[ 11.596] (II) event17 - Razer Razer Copperhead Laser Mouse: device removed
[ 11.596] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:1532:0101.0003/input/input21/event17"
[ 11.596] (II) XINPUT: Adding extended input device "Razer Razer Copperhead Laser Mouse" (type: MOUSE, id 13)
[ 11.596] (**) Option "AccelerationScheme" "none"
[ 11.596] (**) Razer Razer Copperhead Laser Mouse: (accel) selected scheme none/0
[ 11.596] (**) Razer Razer Copperhead Laser Mouse: (accel) acceleration factor: 2.000
[ 11.596] (**) Razer Razer Copperhead Laser Mouse: (accel) acceleration threshold: 4
[ 11.597] (II) event17 - Razer Razer Copperhead Laser Mouse: is tagged by udev as: Mouse
[ 11.598] (II) event17 - Razer Razer Copperhead Laser Mouse: device is a pointer
[ 11.599] (II) config/udev: Adding input device Razer Razer Copperhead Laser Mouse (/dev/input/mouse0)
[ 11.599] (II) No input driver specified, ignoring this device.
[ 11.599] (II) This device may have been added with another device file.
[ 11.600] (II) config/udev: Adding input device Razer Razer Copperhead Laser Mouse (/dev/input/event18)
[ 11.600] (**) Razer Razer Copperhead Laser Mouse: Applying InputClass "libinput keyboard catchall"
[ 11.600] (**) Razer Razer Copperhead Laser Mouse: Applying InputClass "system-keyboard"
[ 11.600] (II) Using input driver 'libinput' for 'Razer Razer Copperhead Laser Mouse'
[ 11.601] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 23 paused 0
[ 11.601] (**) Razer Razer Copperhead Laser Mouse: always reports core events
[ 11.601] (**) Option "Device" "/dev/input/event18"
[ 11.601] (**) Option "_source" "server/udev"
[ 11.602] (II) event18 - Razer Razer Copperhead Laser Mouse: is tagged by udev as: Keyboard
[ 11.602] (II) event18 - Razer Razer Copperhead Laser Mouse: device is a keyboard
[ 11.603] (II) event18 - Razer Razer Copperhead Laser Mouse: device removed
[ 11.603] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:1532:0101.0004/input/input22/event18"
[ 11.603] (II) XINPUT: Adding extended input device "Razer Razer Copperhead Laser Mouse" (type: KEYBOARD, id 14)
[ 11.603] (**) Option "xkb_model" "pc104"
[ 11.603] (**) Option "xkb_layout" "pt"
[ 11.605] (II) event18 - Razer Razer Copperhead Laser Mouse: is tagged by udev as: Keyboard
[ 11.605] (II) event18 - Razer Razer Copperhead Laser Mouse: device is a keyboard
[ 11.606] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 11.606] (II) No input driver specified, ignoring this device.
[ 11.606] (II) This device may have been added with another device file.
[ 11.607] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[ 11.607] (II) No input driver specified, ignoring this device.
[ 11.607] (II) This device may have been added with another device file.
[ 11.607] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
[ 11.607] (II) No input driver specified, ignoring this device.
[ 11.607] (II) This device may have been added with another device file.
[ 11.608] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event10)
[ 11.608] (II) No input driver specified, ignoring this device.
[ 11.608] (II) This device may have been added with another device file.
[ 11.609] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[ 11.609] (II) No input driver specified, ignoring this device.
[ 11.609] (II) This device may have been added with another device file.
[ 11.609] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 11.609] (II) No input driver specified, ignoring this device.
[ 11.609] (II) This device may have been added with another device file.
[ 11.610] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[ 11.610] (II) No input driver specified, ignoring this device.
[ 11.610] (II) This device may have been added with another device file.
[ 11.610] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[ 11.610] (II) No input driver specified, ignoring this device.
[ 11.610] (II) This device may have been added with another device file.
[ 11.611] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event15)
[ 11.611] (II) No input driver specified, ignoring this device.
[ 11.611] (II) This device may have been added with another device file.
[ 11.612] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event16)
[ 11.612] (II) No input driver specified, ignoring this device.
[ 11.612] (II) This device may have been added with another device file.
[ 12.117] (II) intel(0): EDID vendor "ACI", prod id 9209
[ 12.117] (II) intel(0): Using EDID range info for horizontal sync
[ 12.117] (II) intel(0): Using EDID range info for vertical refresh
[ 12.117] (II) intel(0): Printing DDC gathered Modelines:
[ 12.117] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 12.117] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 12.117] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 12.117] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 12.117] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 12.117] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 12.117] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 12.117] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 12.117] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 12.117] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 12.117] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 12.117] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 12.117] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 12.117] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 12.117] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 12.117] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 12.117] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 12.117] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 12.117] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 12.117] (II) intel(0): Modeline "1400x1050"x0.0 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[ 12.117] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 12.117] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 18.405] (II) intel(0): EDID vendor "ACI", prod id 9209
[ 18.405] (II) intel(0): Using hsync ranges from config file
[ 18.405] (II) intel(0): Using vrefresh ranges from config file
[ 18.405] (II) intel(0): Printing DDC gathered Modelines:
[ 18.405] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 18.405] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 18.405] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 18.405] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 18.405] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 18.405] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 18.405] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 18.405] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 18.405] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 18.405] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 18.405] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 18.405] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 18.405] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 18.405] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 18.405] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 18.405] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 18.405] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 18.405] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 18.405] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 18.405] (II) intel(0): Modeline "1400x1050"x0.0 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[ 18.405] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 18.405] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 72.847] (II) intel(0): EDID vendor "ACI", prod id 9209
[ 72.847] (II) intel(0): Using hsync ranges from config file
[ 72.847] (II) intel(0): Using vrefresh ranges from config file
[ 72.847] (II) intel(0): Printing DDC gathered Modelines:
[ 72.847] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 72.847] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 72.847] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 72.847] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 72.847] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 72.847] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 72.847] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 72.847] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 72.847] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 72.847] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 72.847] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 72.847] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 72.847] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 72.847] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 72.847] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 72.847] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 72.847] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 72.847] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 72.847] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 72.847] (II) intel(0): Modeline "1400x1050"x0.0 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[ 72.847] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 72.847] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 82.609] (EE) client bug: timer event17 debounce short: offset negative (-1ms)
[ 84.880] (II) intel(0): EDID vendor "ACI", prod id 9209
[ 84.880] (II) intel(0): Using hsync ranges from config file
[ 84.880] (II) intel(0): Using vrefresh ranges from config file
[ 84.880] (II) intel(0): Printing DDC gathered Modelines:
[ 84.880] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 84.880] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 84.880] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 84.880] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 84.880] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 84.880] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 84.880] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 84.880] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 84.880] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 84.880] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 84.880] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 84.880] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 84.880] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 84.880] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 84.880] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 84.880] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 84.880] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 84.880] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 84.880] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 84.880] (II) intel(0): Modeline "1400x1050"x0.0 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[ 84.880] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 84.880] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 128.523] (II) event17 - Razer Razer Copperhead Laser Mouse: SYN_DROPPED event - some input events have been lost.
[ 128.672] (II) event17 - Razer Razer Copperhead Laser Mouse: SYN_DROPPED event - some input events have been lost.
[ 129.343] (EE) client bug: timer event17 debounce: offset negative (-33ms)
[ 129.343] (EE) client bug: timer event17 debounce short: offset negative (-8ms)
[ 129.576] (**) Option "fd" "13"
[ 129.576] (II) event2 - Power Button: device removed
[ 129.576] (**) Option "fd" "16"
[ 129.576] (II) event6 - Video Bus: device removed
[ 129.576] (**) Option "fd" "17"
[ 129.576] (II) event1 - Power Button: device removed
[ 129.576] (**) Option "fd" "18"
[ 129.576] (II) event0 - Sleep Button: device removed
[ 129.577] (**) Option "fd" "19"
[ 129.577] (II) event3 - Logitech Logitech USB Keyboard: device removed
[ 129.577] (**) Option "fd" "20"
[ 129.577] (II) event4 - Logitech Logitech USB Keyboard Consumer Control: device removed
[ 129.577] (**) Option "fd" "21"
[ 129.577] (II) event5 - Logitech Logitech USB Keyboard System Control: device removed
[ 129.577] (**) Option "fd" "22"
[ 129.577] (II) event17 - Razer Razer Copperhead Laser Mouse: device removed
[ 129.577] (**) Option "fd" "23"
[ 129.577] (II) event18 - Razer Razer Copperhead Laser Mouse: device removed
[ 129.593] (II) UnloadModule: "libinput"
[ 129.593] (II) systemd-logind: releasing fd for 13:82
[ 129.610] (II) UnloadModule: "libinput"
[ 129.610] (II) systemd-logind: releasing fd for 13:81
[ 129.670] (II) UnloadModule: "libinput"
[ 129.670] (II) systemd-logind: releasing fd for 13:69
[ 129.697] (II) UnloadModule: "libinput"
[ 129.697] (II) systemd-logind: releasing fd for 13:68
[ 129.764] (II) UnloadModule: "libinput"
[ 129.764] (II) systemd-logind: releasing fd for 13:67
[ 129.804] (II) UnloadModule: "libinput"
[ 129.804] (II) systemd-logind: releasing fd for 13:64
[ 129.830] (II) UnloadModule: "libinput"
[ 129.831] (II) systemd-logind: releasing fd for 13:65
[ 129.857] (II) UnloadModule: "libinput"
[ 129.857] (II) systemd-logind: releasing fd for 13:70
[ 129.911] (II) UnloadModule: "libinput"
[ 129.911] (II) systemd-logind: releasing fd for 13:66
[ 129.944] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[ 129.944] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[ 129.944] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[ 129.946] (II) Server terminated successfully (0). Closing log file.- dmesg
[ 0.000000] microcode: microcode updated early to revision 0xb4, date = 2019-04-01
[ 0.000000] Linux version 5.3.7-arch1-1-ARCH (builduser@heftig-2611250) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT Fri Oct 18 00:17:03 UTC 2019
[ 0.000000] Command line: root=UUID=97b8ba7a-7779-4a24-beab-1748f833b70e rw initrd=/intel-ucode.img initrd=/initramfs-linux.img resume=UUID=97b8ba7a-7779-4a24-beab-1748f833b70e resume_offset=34816 scsi_mod.use_blk_mq=1 quiet loglevel=3 rd.systemd.show_status=auto rd.udev.log-priority=3
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000062103fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000062104000-0x0000000062104fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000062105000-0x0000000062105fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000062106000-0x000000006c6d5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006c6d6000-0x000000006e030fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006e031000-0x000000006e40bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006e40c000-0x000000006e476fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006e477000-0x000000006effefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006efff000-0x000000006effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006f000000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000086effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x5d485018-0x5d495057] usable ==> usable
[ 0.000000] e820: update [mem 0x5d485018-0x5d495057] usable ==> usable
[ 0.000000] e820: update [mem 0x5d474018-0x5d484e57] usable ==> usable
[ 0.000000] e820: update [mem 0x5d474018-0x5d484e57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000005d474017] usable
[ 0.000000] reserve setup_data: [mem 0x000000005d474018-0x000000005d484e57] usable
[ 0.000000] reserve setup_data: [mem 0x000000005d484e58-0x000000005d485017] usable
[ 0.000000] reserve setup_data: [mem 0x000000005d485018-0x000000005d495057] usable
[ 0.000000] reserve setup_data: [mem 0x000000005d495058-0x0000000062103fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000062104000-0x0000000062104fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000062105000-0x0000000062105fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000062106000-0x000000006c6d5fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006c6d6000-0x000000006e030fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006e031000-0x000000006e40bfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006e40c000-0x000000006e476fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000006e477000-0x000000006effefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006efff000-0x000000006effffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006f000000-0x000000008fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000086effffff] usable
[ 0.000000] efi: EFI v2.60 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x6e40c000 ACPI=0x6e40c000 SMBIOS=0x6ee7f000 SMBIOS 3.0=0x6ee7e000 ESRT=0x6b13e398 MEMATTR=0x6afed198
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z370 Pro4, BIOS P1.80 02/22/2018
[ 0.000000] tsc: Detected 3700.000 MHz processor
[ 0.001131] tsc: Detected 3699.850 MHz TSC
[ 0.001131] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001133] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001137] last_pfn = 0x86f000 max_arch_pfn = 0x400000000
[ 0.001140] MTRR default type: write-back
[ 0.001140] MTRR fixed ranges enabled:
[ 0.001141] 00000-9FFFF write-back
[ 0.001142] A0000-BFFFF uncachable
[ 0.001142] C0000-FFFFF write-protect
[ 0.001143] MTRR variable ranges enabled:
[ 0.001144] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.001144] 1 base 0070000000 mask 7FF0000000 uncachable
[ 0.001145] 2 base 006F800000 mask 7FFF800000 uncachable
[ 0.001145] 3 disabled
[ 0.001146] 4 disabled
[ 0.001146] 5 disabled
[ 0.001146] 6 disabled
[ 0.001147] 7 disabled
[ 0.001147] 8 disabled
[ 0.001147] 9 disabled
[ 0.001512] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001695] last_pfn = 0x6f000 max_arch_pfn = 0x400000000
[ 0.007387] esrt: Reserving ESRT space from 0x000000006b13e398 to 0x000000006b13e3d0.
[ 0.007394] check: Scanning 1 areas for low memory corruption
[ 0.007397] Using GB pages for direct mapping
[ 0.007398] BRK [0x2e1001000, 0x2e1001fff] PGTABLE
[ 0.007399] BRK [0x2e1002000, 0x2e1002fff] PGTABLE
[ 0.007400] BRK [0x2e1003000, 0x2e1003fff] PGTABLE
[ 0.007428] BRK [0x2e1004000, 0x2e1004fff] PGTABLE
[ 0.007429] BRK [0x2e1005000, 0x2e1005fff] PGTABLE
[ 0.007546] BRK [0x2e1006000, 0x2e1006fff] PGTABLE
[ 0.007579] BRK [0x2e1007000, 0x2e1007fff] PGTABLE
[ 0.007665] BRK [0x2e1008000, 0x2e1008fff] PGTABLE
[ 0.007705] BRK [0x2e1009000, 0x2e1009fff] PGTABLE
[ 0.007756] BRK [0x2e100a000, 0x2e100afff] PGTABLE
[ 0.007804] BRK [0x2e100b000, 0x2e100bfff] PGTABLE
[ 0.007849] Secure boot disabled
[ 0.007850] RAMDISK: [mem 0x5d496000-0x5f625fff]
[ 0.007904] ACPI: Early table checksum verification disabled
[ 0.007906] ACPI: RSDP 0x000000006E40C000 000024 (v02 ALASKA)
[ 0.007908] ACPI: XSDT 0x000000006E40C0A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.007911] ACPI: FACP 0x000000006E431138 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.007915] ACPI: DSDT 0x000000006E40C1F0 024F44 (v02 ALASKA A M I 01072009 INTL 20160422)
[ 0.007917] ACPI: FACS 0x000000006E476F00 000040
[ 0.007918] ACPI: APIC 0x000000006E431250 0000F4 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.007920] ACPI: FPDT 0x000000006E431348 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.007921] ACPI: FIDT 0x000000006E431390 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.007923] ACPI: MCFG 0x000000006E431430 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.007925] ACPI: SSDT 0x000000006E431470 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.007927] ACPI: SSDT 0x000000006E431818 003156 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.007929] ACPI: HPET 0x000000006E434970 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
[ 0.007930] ACPI: SSDT 0x000000006E4349A8 000A2F (v02 INTEL xh_kbl_s 00000000 INTL 20160422)
[ 0.007932] ACPI: UEFI 0x000000006E4353D8 000042 (v01 ALASKA A M I 00000002 01000013)
[ 0.007934] ACPI: SSDT 0x000000006E435420 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.007935] ACPI: AAFT 0x000000006E436BD0 000438 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.007937] ACPI: LPIT 0x000000006E437008 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
[ 0.007939] ACPI: SSDT 0x000000006E4370A0 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.007940] ACPI: SSDT 0x000000006E4371E8 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.007942] ACPI: DBGP 0x000000006E437700 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.007944] ACPI: DBG2 0x000000006E437738 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.007945] ACPI: DMAR 0x000000006E437790 0000A8 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.007947] ACPI: WSMT 0x000000006E437838 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.007952] ACPI: Local APIC address 0xfee00000
[ 0.008079] No NUMA configuration found
[ 0.008080] Faking a node at [mem 0x0000000000000000-0x000000086effffff]
[ 0.008082] NODE_DATA(0) allocated [mem 0x86effc000-0x86effffff]
[ 0.008105] Zone ranges:
[ 0.008105] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008106] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008107] Normal [mem 0x0000000100000000-0x000000086effffff]
[ 0.008107] Device empty
[ 0.008108] Movable zone start for each node
[ 0.008108] Early memory node ranges
[ 0.008109] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.008109] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.008110] node 0: [mem 0x0000000000100000-0x0000000062103fff]
[ 0.008110] node 0: [mem 0x0000000062106000-0x000000006c6d5fff]
[ 0.008111] node 0: [mem 0x000000006e031000-0x000000006e40bfff]
[ 0.008111] node 0: [mem 0x000000006efff000-0x000000006effffff]
[ 0.008112] node 0: [mem 0x0000000100000000-0x000000086effffff]
[ 0.008160] Zeroed struct page in unavailable ranges: 13748 pages
[ 0.008161] Initmem setup node 0 [mem 0x0000000000001000-0x000000086effffff]
[ 0.008162] On node 0 totalpages: 8239692
[ 0.008162] DMA zone: 64 pages used for memmap
[ 0.008163] DMA zone: 22 pages reserved
[ 0.008163] DMA zone: 3996 pages, LIFO batch:0
[ 0.008188] DMA32 zone: 6891 pages used for memmap
[ 0.008189] DMA32 zone: 441008 pages, LIFO batch:63
[ 0.011801] Normal zone: 121792 pages used for memmap
[ 0.011801] Normal zone: 7794688 pages, LIFO batch:63
[ 0.057886] Reserving Intel graphics memory at [mem 0x70000000-0x8fffffff]
[ 0.058066] ACPI: PM-Timer IO Port: 0x1808
[ 0.058067] ACPI: Local APIC address 0xfee00000
[ 0.058072] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.058072] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.058073] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.058073] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.058073] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.058074] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.058074] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.058075] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.058075] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.058075] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.058076] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.058076] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.058102] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.058103] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.058104] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.058105] ACPI: IRQ0 used by override.
[ 0.058105] ACPI: IRQ9 used by override.
[ 0.058106] Using ACPI (MADT) for SMP configuration information
[ 0.058107] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.058110] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.058121] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.058122] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.058123] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.058124] PM: Registered nosave memory: [mem 0x5d474000-0x5d474fff]
[ 0.058125] PM: Registered nosave memory: [mem 0x5d484000-0x5d484fff]
[ 0.058125] PM: Registered nosave memory: [mem 0x5d485000-0x5d485fff]
[ 0.058126] PM: Registered nosave memory: [mem 0x5d495000-0x5d495fff]
[ 0.058127] PM: Registered nosave memory: [mem 0x62104000-0x62104fff]
[ 0.058128] PM: Registered nosave memory: [mem 0x62105000-0x62105fff]
[ 0.058129] PM: Registered nosave memory: [mem 0x6c6d6000-0x6e030fff]
[ 0.058130] PM: Registered nosave memory: [mem 0x6e40c000-0x6e476fff]
[ 0.058130] PM: Registered nosave memory: [mem 0x6e477000-0x6effefff]
[ 0.058131] PM: Registered nosave memory: [mem 0x6f000000-0x8fffffff]
[ 0.058132] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[ 0.058132] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.058132] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.058133] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.058133] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.058133] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.058134] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.058134] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.058134] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[ 0.058135] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.058135] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.058135] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.058137] [mem 0x90000000-0xdfffffff] available for PCI devices
[ 0.058138] Booting paravirtualized kernel on bare hardware
[ 0.058139] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.121944] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:12 nr_node_ids:1
[ 0.122162] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[ 0.122167] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[ 0.122168] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
[ 0.122182] Built 1 zonelists, mobility grouping on. Total pages: 8110923
[ 0.122182] Policy zone: Normal
[ 0.122183] Kernel command line: root=UUID=97b8ba7a-7779-4a24-beab-1748f833b70e rw initrd=/intel-ucode.img initrd=/initramfs-linux.img resume=UUID=97b8ba7a-7779-4a24-beab-1748f833b70e resume_offset=34816 scsi_mod.use_blk_mq=1 quiet loglevel=3 rd.systemd.show_status=auto rd.udev.log-priority=3
[ 0.123381] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.123930] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.124002] mem auto-init: stack:byref_all, heap alloc:off, heap free:off
[ 0.126233] Calgary: detecting Calgary via BIOS EBDA area
[ 0.126234] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.168353] Memory: 32237068K/32958768K available (12291K kernel code, 1321K rwdata, 3952K rodata, 1632K init, 3548K bss, 721700K reserved, 0K cma-reserved)
[ 0.168440] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.168447] Kernel/User page tables isolation: enabled
[ 0.168457] ftrace: allocating 37808 entries in 148 pages
[ 0.178203] rcu: Preemptible hierarchical RCU implementation.
[ 0.178204] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.178204] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.178204] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=12.
[ 0.178205] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.178205] Tasks RCU enabled.
[ 0.178206] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.178206] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[ 0.179237] NR_IRQS: 20736, nr_irqs: 2152, preallocated irqs: 16
[ 0.179414] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.179542] random: get_random_bytes called from start_kernel+0x3ce/0x5a9 with crng_init=0
[ 0.179558] Console: colour dummy device 80x25
[ 0.179560] printk: console [tty0] enabled
[ 0.179572] ACPI: Core revision 20190703
[ 0.179765] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.179829] APIC: Switch to symmetric I/O mode setup
[ 0.179830] DMAR: Host address width 39
[ 0.179831] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.179835] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.179835] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.179838] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.179838] DMAR: RMRR base: 0x0000006d00e000 end: 0x0000006d02dfff
[ 0.179839] DMAR: RMRR base: 0x0000006f800000 end: 0x0000008fffffff
[ 0.179840] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.179840] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.179841] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.181223] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.181224] x2apic enabled
[ 0.181235] Switched APIC routing to cluster x2apic.
[ 0.185374] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.199782] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa99074b1c, max_idle_ns: 881590506587 ns
[ 0.199785] Calibrating delay loop (skipped), value calculated using timer frequency.. 7402.02 BogoMIPS (lpj=12332833)
[ 0.199786] pid_max: default: 32768 minimum: 301
[ 0.200902] LSM: Security Framework initializing
[ 0.200905] Yama: becoming mindful.
[ 0.200946] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.200978] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.201077] *** VALIDATE proc ***
[ 0.201106] *** VALIDATE cgroup1 ***
[ 0.201107] *** VALIDATE cgroup2 ***
[ 0.201140] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.201158] process: using mwait in idle threads
[ 0.201160] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.201160] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.201162] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.201162] Spectre V2 : Mitigation: Full generic retpoline
[ 0.201163] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.201163] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.201164] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.201165] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.201165] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.201167] MDS: Mitigation: Clear CPU buffers
[ 0.201334] Freeing SMP alternatives memory: 32K
[ 0.202113] TSC deadline timer enabled
[ 0.202118] smpboot: CPU0: Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[ 0.219802] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.219816] ... version: 4
[ 0.219818] ... bit width: 48
[ 0.219819] ... generic registers: 4
[ 0.219821] ... value mask: 0000ffffffffffff
[ 0.219823] ... max period: 00007fffffffffff
[ 0.219824] ... fixed-purpose events: 3
[ 0.219826] ... event mask: 000000070000000f
[ 0.226458] rcu: Hierarchical SRCU implementation.
[ 0.250021] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.256465] smp: Bringing up secondary CPUs ...
[ 0.296482] x86: Booting SMP configuration:
[ 0.296485] .... node #0, CPUs: #1 #2 #3 #4 #5 #6
[ 0.496982] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.536489] #7 #8 #9 #10 #11
[ 0.696893] smp: Brought up 1 node, 12 CPUs
[ 0.696893] smpboot: Max logical packages: 1
[ 0.696893] smpboot: Total of 12 processors activated (88831.24 BogoMIPS)
[ 0.700249] devtmpfs: initialized
[ 0.700249] x86/mm: Memory block size: 128MB
[ 0.702532] PM: Registering ACPI NVS region [mem 0x62104000-0x62104fff] (4096 bytes)
[ 0.702532] PM: Registering ACPI NVS region [mem 0x6e40c000-0x6e476fff] (438272 bytes)
[ 0.703157] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.703157] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.703183] pinctrl core: initialized pinctrl subsystem
[ 0.703313] PM: RTC time: 09:16:01, date: 2019-10-27
[ 0.703392] NET: Registered protocol family 16
[ 0.703460] audit: initializing netlink subsys (disabled)
[ 0.703464] audit: type=2000 audit(1572167761.523:1): state=initialized audit_enabled=0 res=1
[ 0.703464] cpuidle: using governor ladder
[ 0.703464] cpuidle: using governor menu
[ 0.703464] KVM setup pv remote TLB flush
[ 0.703464] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.703464] ACPI: bus type PCI registered
[ 0.703464] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.703464] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.703464] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.703464] PCI: Using configuration type 1 for base access
[ 0.705132] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.706474] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.706474] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.706517] ACPI: Added _OSI(Module Device)
[ 0.706518] ACPI: Added _OSI(Processor Device)
[ 0.706518] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.706519] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.706520] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.706520] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.706521] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.734921] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.739704] ACPI: Dynamic OEM Table Load:
[ 0.739708] ACPI: SSDT 0xFFFF8BA00B3DB000 00077A (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.740830] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[ 0.741616] ACPI: Dynamic OEM Table Load:
[ 0.741619] ACPI: SSDT 0xFFFF8BA00AAE9800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.742659] ACPI: Dynamic OEM Table Load:
[ 0.742661] ACPI: SSDT 0xFFFF8BA00B3D6180 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
[ 0.743642] ACPI: Dynamic OEM Table Load:
[ 0.743645] ACPI: SSDT 0xFFFF8BA00B3DB800 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422)
[ 0.744923] ACPI: Dynamic OEM Table Load:
[ 0.744927] ACPI: SSDT 0xFFFF8BA00AC28000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.746508] ACPI: Dynamic OEM Table Load:
[ 0.746511] ACPI: SSDT 0xFFFF8BA00AAED000 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
[ 0.747584] ACPI: Dynamic OEM Table Load:
[ 0.747586] ACPI: SSDT 0xFFFF8BA00AAED800 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.752034] ACPI: Interpreter enabled
[ 0.752064] ACPI: (supports S0 S3 S4 S5)
[ 0.752065] ACPI: Using IOAPIC for interrupt routing
[ 0.752155] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.752657] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.770391] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.770395] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.770532] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.770661] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.770661] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.771149] PCI host bridge to bus 0000:00
[ 0.771150] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.771151] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.771152] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.771152] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.771153] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.771153] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.771154] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.771155] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.771155] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.771156] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.771157] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.771157] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.771158] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.771158] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.771159] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.771160] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[ 0.771160] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.771161] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.771167] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
[ 0.771262] pci 0000:00:02.0: [8086:3e92] type 00 class 0x030000
[ 0.771270] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[ 0.771274] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.771277] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.771287] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.771439] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
[ 0.771457] pci 0000:00:14.0: reg 0x10: [mem 0xdf130000-0xdf13ffff 64bit]
[ 0.771511] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.771676] pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000
[ 0.771693] pci 0000:00:14.2: reg 0x10: [mem 0xdf14e000-0xdf14efff 64bit]
[ 0.771836] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
[ 0.771855] pci 0000:00:16.0: reg 0x10: [mem 0xdf14d000-0xdf14dfff 64bit]
[ 0.771916] pci 0000:00:16.0: PME# supported from D3hot
[ 0.772073] pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
[ 0.772087] pci 0000:00:17.0: reg 0x10: [mem 0xdf148000-0xdf149fff]
[ 0.772093] pci 0000:00:17.0: reg 0x14: [mem 0xdf14c000-0xdf14c0ff]
[ 0.772099] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.772104] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.772110] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.772115] pci 0000:00:17.0: reg 0x24: [mem 0xdf14b000-0xdf14b7ff]
[ 0.772147] pci 0000:00:17.0: PME# supported from D3hot
[ 0.772262] pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
[ 0.772329] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.772476] pci 0000:00:1b.4: [8086:a2eb] type 01 class 0x060400
[ 0.772535] pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
[ 0.772678] pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
[ 0.772743] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.772898] pci 0000:00:1c.7: [8086:a297] type 01 class 0x060400
[ 0.772965] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.773101] pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400
[ 0.773168] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.773331] pci 0000:00:1f.0: [8086:a2c9] type 00 class 0x060100
[ 0.773528] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
[ 0.773540] pci 0000:00:1f.2: reg 0x10: [mem 0xdf144000-0xdf147fff]
[ 0.773674] pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
[ 0.773696] pci 0000:00:1f.3: reg 0x10: [mem 0xdf140000-0xdf143fff 64bit]
[ 0.773717] pci 0000:00:1f.3: reg 0x20: [mem 0xdf120000-0xdf12ffff 64bit]
[ 0.773757] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.773949] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
[ 0.774008] pci 0000:00:1f.4: reg 0x10: [mem 0xdf14a000-0xdf14a0ff 64bit]
[ 0.774077] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.774256] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
[ 0.774278] pci 0000:00:1f.6: reg 0x10: [mem 0xdf100000-0xdf11ffff]
[ 0.774362] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.774540] pci 0000:00:1b.0: PCI bridge to [bus 01]
[ 0.774622] pci 0000:02:00.0: [144d:a808] type 00 class 0x010802
[ 0.774647] pci 0000:02:00.0: reg 0x10: [mem 0xdf000000-0xdf003fff 64bit]
[ 0.774817] pci 0000:00:1b.4: PCI bridge to [bus 02]
[ 0.774820] pci 0000:00:1b.4: bridge window [mem 0xdf000000-0xdf0fffff]
[ 0.774889] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.774964] pci 0000:00:1c.7: PCI bridge to [bus 04]
[ 0.775038] pci 0000:00:1d.0: PCI bridge to [bus 05]
[ 0.775940] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.775988] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.776034] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.776079] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.776124] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.776169] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.776215] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.776261] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.776566] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.776566] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.776566] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.776566] vgaarb: loaded
[ 0.776566] ACPI: bus type USB registered
[ 0.776566] usbcore: registered new interface driver usbfs
[ 0.776566] usbcore: registered new interface driver hub
[ 0.776568] usbcore: registered new device driver usb
[ 0.776579] pps_core: LinuxPPS API ver. 1 registered
[ 0.776580] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.776581] PTP clock support registered
[ 0.776584] EDAC MC: Ver: 3.0.0
[ 0.776636] Registered efivars operations
[ 0.776636] PCI: Using ACPI for IRQ routing
[ 0.804386] PCI: pci_cache_line_size set to 64 bytes
[ 0.804425] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.804426] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.804426] e820: reserve RAM buffer [mem 0x5d474018-0x5fffffff]
[ 0.804427] e820: reserve RAM buffer [mem 0x5d485018-0x5fffffff]
[ 0.804427] e820: reserve RAM buffer [mem 0x62104000-0x63ffffff]
[ 0.804428] e820: reserve RAM buffer [mem 0x6c6d6000-0x6fffffff]
[ 0.804429] e820: reserve RAM buffer [mem 0x6e40c000-0x6fffffff]
[ 0.804429] e820: reserve RAM buffer [mem 0x6f000000-0x6fffffff]
[ 0.804430] e820: reserve RAM buffer [mem 0x86f000000-0x86fffffff]
[ 0.804485] NetLabel: Initializing
[ 0.804486] NetLabel: domain hash size = 128
[ 0.804486] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.804494] NetLabel: unlabeled traffic allowed by default
[ 0.804497] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.804497] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.806487] clocksource: Switched to clocksource tsc-early
[ 0.813256] VFS: Disk quotas dquot_6.6.0
[ 0.813265] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.813279] *** VALIDATE hugetlbfs ***
[ 0.813297] pnp: PnP ACPI init
[ 0.813503] system 00:00: [io 0x0280-0x028f] has been reserved
[ 0.813504] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.813505] system 00:00: [io 0x02a0-0x02af] has been reserved
[ 0.813506] system 00:00: [io 0x02b0-0x02bf] has been reserved
[ 0.813509] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.813641] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.813642] system 00:01: [io 0xffff] has been reserved
[ 0.813642] system 00:01: [io 0xffff] has been reserved
[ 0.813643] system 00:01: [io 0xffff] has been reserved
[ 0.813644] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.813645] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.813646] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.813714] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.813716] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.813728] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.813754] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.813756] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.813942] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.813942] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.813943] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.813944] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.813945] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.813946] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.813946] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.813947] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.813948] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.813949] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.813951] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.813980] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.813981] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.813981] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.813982] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.813983] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.813984] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.813985] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.813986] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.814222] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.814224] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.815173] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.815173] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.815174] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.815176] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.815719] pnp: PnP ACPI: found 9 devices
[ 0.816488] thermal_sys: Registered thermal governor 'fair_share'
[ 0.816489] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.816489] thermal_sys: Registered thermal governor 'step_wise'
[ 0.816490] thermal_sys: Registered thermal governor 'user_space'
[ 0.816490] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.821012] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.821032] pci 0000:00:1b.0: PCI bridge to [bus 01]
[ 0.821039] pci 0000:00:1b.4: PCI bridge to [bus 02]
[ 0.821042] pci 0000:00:1b.4: bridge window [mem 0xdf000000-0xdf0fffff]
[ 0.821046] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.821052] pci 0000:00:1c.7: PCI bridge to [bus 04]
[ 0.821059] pci 0000:00:1d.0: PCI bridge to [bus 05]
[ 0.821066] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.821067] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.821067] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.821068] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.821069] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.821069] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.821070] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.821071] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.821071] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.821072] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.821073] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.821073] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.821074] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.821075] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.821075] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.821076] pci_bus 0000:00: resource 19 [mem 0x90000000-0xdfffffff window]
[ 0.821077] pci_bus 0000:00: resource 20 [mem 0xfd000000-0xfe7fffff window]
[ 0.821077] pci_bus 0000:02: resource 1 [mem 0xdf000000-0xdf0fffff]
[ 0.821193] NET: Registered protocol family 2
[ 0.821272] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.821293] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.821454] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.821513] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.821530] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.821567] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.821642] NET: Registered protocol family 1
[ 0.821645] NET: Registered protocol family 44
[ 0.821650] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.821835] PCI: CLS 64 bytes, default 64
[ 0.821855] Trying to unpack rootfs image as initramfs...
[ 0.830982] Freeing initrd memory: 34368K
[ 0.876514] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.876519] software IO TLB: mapped [mem 0x66fed000-0x6afed000] (64MB)
[ 0.876689] check: Scanning for low memory corruption every 60 seconds
[ 0.876939] Initialise system trusted keyrings
[ 0.876945] Key type blacklist registered
[ 0.876962] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[ 0.877702] zbud: loaded
[ 0.880886] Key type asymmetric registered
[ 0.880887] Asymmetric key parser 'x509' registered
[ 0.880892] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.880919] io scheduler mq-deadline registered
[ 0.880919] io scheduler kyber registered
[ 0.880935] io scheduler bfq registered
[ 0.881715] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.881755] efifb: probing for efifb
[ 0.881763] efifb: No BGRT, not showing boot graphics
[ 0.881764] efifb: framebuffer at 0xc0000000, using 8100k, total 8100k
[ 0.881764] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.881764] efifb: scrolling: redraw
[ 0.881765] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.881789] fbcon: Deferring console take-over
[ 0.881789] fb0: EFI VGA frame buffer device
[ 0.881794] intel_idle: MWAIT substates: 0x11142120
[ 0.881794] intel_idle: v0.4.1 model 0x9E
[ 0.882269] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.882323] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.882328] ACPI: Sleep Button [SLPB]
[ 0.882346] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.882350] ACPI: Power Button [PWRB]
[ 0.882366] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.883208] ACPI: Power Button [PWRF]
[ 0.884620] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.885192] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.885192] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.885972] nvme nvme0: pci function 0000:02:00.0
[ 0.885994] usbcore: registered new interface driver usbserial_generic
[ 0.885996] usbserial: USB Serial support registered for generic
[ 0.886008] rtc_cmos 00:03: RTC can wake from S4
[ 0.886432] rtc_cmos 00:03: registered as rtc0
[ 0.886441] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.886470] intel_pstate: Intel P-state driver initializing
[ 0.887326] intel_pstate: HWP enabled
[ 0.887718] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.887741] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:06 [mem 0xfdb00000-0xfdffffff]
[ 0.887743] caller pmc_core_probe+0x85/0x2da mapping multiple BARs
[ 0.887753] intel_pmc_core INT33A1:00: initialized
[ 0.887883] NET: Registered protocol family 10
[ 0.892831] Segment Routing with IPv6
[ 0.892843] NET: Registered protocol family 17
[ 0.893525] RAS: Correctable Errors collector initialized.
[ 0.893543] microcode: sig=0x906ea, pf=0x2, revision=0xb4
[ 0.893912] microcode: Microcode Update Driver: v2.2.
[ 0.893918] sched_clock: Marking stable (893631609, 277794)->(898056142, -4146739)
[ 0.894173] registered taskstats version 1
[ 0.894177] Loading compiled-in X.509 certificates
[ 0.897411] Loaded X.509 cert 'Build time autogenerated kernel key: a8f69e58fd882cfcd2571a1f28e21cb64150108f'
[ 0.897429] zswap: loaded using pool lzo/zbud
[ 0.903700] Key type big_key registered
[ 0.904800] PM: Magic number: 7:726:273
[ 0.904810] tty tty10: hash matches
[ 0.904814] net lo: hash matches
[ 0.904822] acpi device:7b: hash matches
[ 0.904995] rtc_cmos 00:03: setting system clock to 2019-10-27T09:16:01 UTC (1572167761)
[ 1.097370] nvme nvme0: missing or invalid SUBNQN field.
[ 1.097427] nvme nvme0: Shutdown timeout set to 8 seconds
[ 1.117201] nvme nvme0: 12/0/0 default/read/poll queues
[ 1.127382] nvme0n1: p1 p2 p3 p4 p5 p6
[ 1.131582] Freeing unused decrypted memory: 2040K
[ 1.132365] Freeing unused kernel image memory: 1632K
[ 1.149932] Write protecting the kernel read-only data: 18432k
[ 1.151334] Freeing unused kernel image memory: 2012K
[ 1.151611] Freeing unused kernel image memory: 144K
[ 1.159614] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.159618] x86/mm: Checking user space page tables
[ 1.164563] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.164564] Run /init as init process
[ 1.219349] Linux agpgart interface v0.103
[ 1.263922] checking generic (c0000000 7e9000) vs hw (c0000000 10000000)
[ 1.263923] fb0: switching to inteldrmfb from EFI VGA
[ 1.263957] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.264490] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.264490] [drm] Driver supports precise vblank timestamp query.
[ 1.264861] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.265147] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 1.295738] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[ 1.297222] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.297449] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.341486] fbcon: i915drmfb (fb0) is primary device
[ 1.341487] fbcon: Deferring console take-over
[ 1.341489] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 1.405420] random: fast init done
[ 1.464325] SCSI subsystem initialized
[ 1.464533] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.464537] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.465596] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 1.465599] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.465729] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.465729] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.465730] usb usb1: Product: xHCI Host Controller
[ 1.465731] usb usb1: Manufacturer: Linux 5.3.7-arch1-1-ARCH xhci-hcd
[ 1.465731] usb usb1: SerialNumber: 0000:00:14.0
[ 1.465789] hub 1-0:1.0: USB hub found
[ 1.465804] hub 1-0:1.0: 16 ports detected
[ 1.467087] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.467089] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.467090] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.467110] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[ 1.467111] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.467111] usb usb2: Product: xHCI Host Controller
[ 1.467112] usb usb2: Manufacturer: Linux 5.3.7-arch1-1-ARCH xhci-hcd
[ 1.467112] usb usb2: SerialNumber: 0000:00:14.0
[ 1.467222] hub 2-0:1.0: USB hub found
[ 1.467232] hub 2-0:1.0: 10 ports detected
[ 1.468042] usb: port power management may be unreliable
[ 1.468784] libata version 3.00 loaded.
[ 1.471382] ahci 0000:00:17.0: version 3.0
[ 1.481715] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.481722] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 1.531846] scsi host0: ahci
[ 1.532259] scsi host1: ahci
[ 1.532581] scsi host2: ahci
[ 1.532967] scsi host3: ahci
[ 1.533334] scsi host4: ahci
[ 1.533754] scsi host5: ahci
[ 1.533873] ata1: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b100 irq 142
[ 1.533877] ata2: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b180 irq 142
[ 1.533880] ata3: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b200 irq 142
[ 1.533883] ata4: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b280 irq 142
[ 1.533886] ata5: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b300 irq 142
[ 1.533890] ata6: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b380 irq 142
[ 1.796675] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.814440] usb 2-3: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00
[ 1.814445] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.814448] usb 2-3: Product: Ultra USB 3.0
[ 1.814451] usb 2-3: Manufacturer: SanDisk
[ 1.814454] usb 2-3: SerialNumber: 4C531001410327108183
[ 1.822279] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 1.822526] scsi host6: usb-storage 2-3:1.0
[ 1.822562] usbcore: registered new interface driver usb-storage
[ 1.823543] usbcore: registered new interface driver uas
[ 1.847139] ata1: SATA link down (SStatus 4 SControl 300)
[ 1.847153] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.847169] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.847182] ata6: SATA link down (SStatus 4 SControl 300)
[ 1.847207] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.847222] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.847829] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20190703/psargs-330)
[ 1.847834] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20190703/psparse-529)
[ 1.847840] ata3.00: ATAPI: Optiarc DVD RW AD-7173S, 1-02, max UDMA/66
[ 1.848776] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20190703/psargs-330)
[ 1.848781] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20190703/psparse-529)
[ 1.848787] ata3.00: configured for UDMA/66
[ 1.850140] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7173S 1-02 PQ: 0 ANSI: 5
[ 1.860032] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20190703/psargs-330)
[ 1.860038] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20190703/psparse-529)
[ 1.860046] ata4.00: ATAPI: Optiarc DVD RW AD-7191S, 1.01, max UDMA/100
[ 1.873316] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20190703/psargs-330)
[ 1.873326] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20190703/psparse-529)
[ 1.873338] ata4.00: configured for UDMA/100
[ 1.876955] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7191S 1.01 PQ: 0 ANSI: 5
[ 1.886566] tsc: Refined TSC clocksource calibration: 3695.975 MHz
[ 1.886591] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8cf8f12a3, max_idle_ns: 881590876070 ns
[ 1.886652] clocksource: Switched to clocksource tsc
[ 1.939825] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[ 1.982670] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.982675] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.983388] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.022535] sr 3:0:0:0: [sr1] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.023224] sr 3:0:0:0: Attached scsi CD-ROM sr1
[ 2.087036] usb 1-1: New USB device found, idVendor=046d, idProduct=c316, bcdDevice=28.00
[ 2.087041] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.087044] usb 1-1: Product: Logitech USB Keyboard
[ 2.087047] usb 1-1: Manufacturer: Logitech
[ 2.095434] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.104454] usbcore: registered new interface driver usbhid
[ 2.104455] usbhid: USB HID core driver
[ 2.105839] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C316.0001/input/input4
[ 2.160162] hid-generic 0003:046D:C316.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:14.0-1/input0
[ 2.160470] input: Logitech Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C316.0002/input/input5
[ 2.203551] usb 2-4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 2.216638] input: Logitech Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C316.0002/input/input6
[ 2.216824] hid-generic 0003:046D:C316.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:14.0-1/input1
[ 2.223523] usb 2-4: New USB device found, idVendor=05e3, idProduct=0748, bcdDevice=12.06
[ 2.223528] usb 2-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[ 2.223532] usb 2-4: Product: USB3 Reader
[ 2.223535] usb 2-4: Manufacturer: SABRENT
[ 2.223538] usb 2-4: SerialNumber: 000000000002
[ 2.227570] usb-storage 2-4:1.0: USB Mass Storage device detected
[ 2.228036] scsi host7: usb-storage 2-4:1.0
[ 2.343209] usb 1-10: new full-speed USB device number 3 using xhci_hcd
[ 2.402618] PM: Image not found (code -22)
[ 2.422045] fbcon: Taking over console
[ 2.847294] scsi 6:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6
[ 2.854254] sd 6:0:0:0: [sda] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB)
[ 2.854604] sd 6:0:0:0: [sda] Write Protect is off
[ 2.854605] sd 6:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 2.854849] sd 6:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.856749] sda: sda1 sda2 sda3
[ 2.858091] sd 6:0:0:0: [sda] Attached SCSI removable disk
[ 3.248399] scsi 7:0:0:0: Direct-Access SABRENT CF USB3 Reader 1206 PQ: 0 ANSI: 6
[ 3.249627] scsi 7:0:0:1: Direct-Access SABRENT xD USB3 Reader 1206 PQ: 0 ANSI: 6
[ 3.250995] scsi 7:0:0:2: Direct-Access SABRENT SD USB3 Reader 1206 PQ: 0 ANSI: 6
[ 3.252397] scsi 7:0:0:3: Direct-Access SABRENT MS USB3 Reader 1206 PQ: 0 ANSI: 6
[ 3.253875] scsi 7:0:0:4: Direct-Access SABRENT TFM2USB3 Reader 1206 PQ: 0 ANSI: 6
[ 3.259864] sd 7:0:0:4: [sdf] Attached SCSI removable disk
[ 3.260625] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 3.262683] sd 7:0:0:1: [sdc] Attached SCSI removable disk
[ 3.264373] sd 7:0:0:2: [sdd] Attached SCSI removable disk
[ 3.271948] sd 7:0:0:3: [sde] Attached SCSI removable disk
[ 3.913198] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[ 4.057480] usb 1-10: New USB device found, idVendor=1532, idProduct=0101, bcdDevice=21.00
[ 4.057485] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.057488] usb 1-10: Product: Razer Copperhead Laser Mouse
[ 4.057491] usb 1-10: Manufacturer: Razer
[ 4.060884] input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:1532:0101.0003/input/input7
[ 4.061079] hid-generic 0003:1532:0101.0003: input,hidraw2: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-10/input0
[ 4.062715] input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:1532:0101.0004/input/input8
[ 4.116723] hid-generic 0003:1532:0101.0004: input,hidraw3: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-10/input1
[ 4.476953] Console: switching to colour frame buffer device 240x67
[ 5.746957] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.802282] systemd[1]: systemd 243.78-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.816521] systemd[1]: Detected architecture x86-64.
[ 5.818349] systemd[1]: Set hostname to <noelws>.
[ 5.889037] systemd[1]: Created slice system-getty.slice.
[ 5.889173] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.889288] systemd[1]: Created slice User and Session Slice.
[ 5.889325] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.889351] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.889507] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.889525] systemd[1]: Reached target Local Encrypted Volumes.
[ 5.901260] random: lvm: uninitialized urandom read (4 bytes read)
[ 5.902317] EXT4-fs (nvme0n1p3): re-mounted. Opts: discard
[ 5.905821] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 5.905843] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 5.905865] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 5.905884] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 5.905903] sd 7:0:0:1: Attached scsi generic sg4 type 0
[ 5.905924] sd 7:0:0:2: Attached scsi generic sg5 type 0
[ 5.905941] sd 7:0:0:3: Attached scsi generic sg6 type 0
[ 5.905961] sd 7:0:0:4: Attached scsi generic sg7 type 0
[ 5.910980] random: crng init done
[ 5.913143] fuse: init (API version 7.31)
[ 5.941248] vboxdrv: loading out-of-tree module taints kernel.
[ 5.941319] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 5.944809] vboxdrv: Found 12 processor cores
[ 5.963381] vboxdrv: TSC mode is Invariant, tentative frequency 3695974485 Hz
[ 5.963381] vboxdrv: Successfully loaded version 6.0.14 (interface 0x00290008)
[ 5.964761] VBoxPciLinuxInit
[ 5.964763] vboxpci: IOMMU not found (not registered)
[ 5.965395] VBoxNetAdp: Successfully started.
[ 5.966903] VBoxNetFlt: Successfully started.
[ 6.054332] audit: type=1130 audit(1572167766.645:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.057955] systemd-journald[377]: Received client request to flush runtime journal.
[ 6.102991] audit: type=1130 audit(1572167766.691:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.110518] audit: type=1130 audit(1572167766.701:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.143906] EDAC ie31200: No ECC support
[ 6.180255] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 6.180255] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 6.180256] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 6.180256] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 6.180256] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 6.181793] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 6.183833] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 6.183834] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 6.183850] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
[ 6.183995] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 6.184621] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 6.187133] Adding 14680060k swap on /swapfile. Priority:-2 extents:15 across:16015356k SSFS
[ 6.191304] mousedev: PS/2 mouse device common for all mice
[ 6.191535] cryptd: max_cpu_qlen set to 1000
[ 6.276018] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 6.276144] snd_hda_intel 0000:00:1f.3: Applying patch firmware 'hda-jack-retask.fw'
[ 6.279228] AVX2 version of gcm_enc/dec engaged.
[ 6.279228] AES CTR mode by8 optimization enabled
[ 6.363972] audit: type=1130 audit(1572167766.955:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.387056] audit: type=1130 audit(1572167766.978:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-4aed98da\x2dc1a3\x2d4aa5\x2db827\x2dcb39e9dbc37b comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.397491] EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: discard
[ 6.410418] audit: type=1130 audit(1572167767.001:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-FA2B\x2dA83F comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.420109] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 6.457008] iTCO_vendor_support: vendor-support=0
[ 6.460846] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.460955] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 6.478616] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.490283] audit: type=1130 audit(1572167767.081:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.496131] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 70:85:c2:70:cb:c7
[ 6.496137] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 6.496586] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 6.497738] audit: type=1127 audit(1572167767.088:9): pid=587 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[ 6.499032] audit: type=1130 audit(1572167767.088:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.502414] pktcdvd: pktcdvd0: writer mapped to sr0
[ 6.554591] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 6.556985] pktcdvd: pktcdvd1: writer mapped to sr1
[ 6.661737] audit: type=1130 audit(1572167767.251:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-timesyncd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.860921] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.975677] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290
[ 6.980527] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 6.980528] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.980529] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.980529] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.980530] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.980530] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 6.980531] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 6.980532] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 7.042609] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 7.043021] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 7.043046] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 7.043075] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 7.043098] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 7.043134] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 7.043158] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 7.043180] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 7.043203] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 7.043226] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 7.334304] intel_rapl_common: Found RAPL domain package
[ 7.334309] intel_rapl_common: Found RAPL domain core
[ 7.334312] intel_rapl_common: Found RAPL domain uncore
[ 7.334314] intel_rapl_common: Found RAPL domain dram
[ 13.539835] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 13.539939] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[ 17.020476] kauditd_printk_skb: 13 callbacks suppressed
[ 17.020480] audit: type=1131 audit(1572167777.611:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 20.296267] audit: type=1006 audit(1572167780.885:26): pid=658 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[ 20.306250] audit: type=1130 audit(1572167780.895:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 20.310590] audit: type=1006 audit(1572167780.901:28): pid=663 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 20.370998] audit: type=1130 audit(1572167780.961:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 20.386412] audit: type=1112 audit(1572167780.975:30): pid=658 uid=0 auid=1000 ses=1 msg='op=login id=1000 exe="/usr/bin/lightdm" hostname=noelws addr=? terminal=/dev/tty7 res=success'
[ 37.151100] audit: type=1131 audit(1572167798.201:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 37.849176] audit: type=1130 audit(1572167798.898:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty3 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 55.533010] audit: type=1006 audit(1572167816.581:33): pid=687 uid=0 old-auid=4294967295 auid=1000 tty=tty3 old-ses=4294967295 ses=3 res=1
[ 294.052529] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to enable link training
[ 298.186012] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to enable link training
[ 302.319199] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to enable link training
[ 306.452538] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to enable link training- /etc/X11/xorg.conf.d/20-intel.conf (no xorg.conf file)
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
# Option "AccelMethod" "uxa"
# Option "TearFree" "true"
EndSectionTried with different AccelMethod's
- /etc/mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES=(piix ide_disk reiserfs)
MODULES=(i915)
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=()
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=()
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS=(base)
#
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS=(base udev autodetect block filesystems)
#
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS=(base udev block filesystems)
#
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS=(base udev block mdadm encrypt filesystems)
#
## This setup loads an lvm2 volume group on a usb device.
# HOOKS=(base udev block lvm2 filesystems)
#
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS=(base udev resume autodetect modconf block filesystems keyboard fsck)
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
COMPRESSION="cat"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=()- /etc/modprobe.d/i915.conf
options i915 enable_guc=2Tried with and without enable_guc=2 and fastboot=1
- xrandr --verbose [2 monitors connected]
zsh: correct 'xradr' to 'xrandr' [nyae]? y
Screen 0: minimum 8 x 8, current 3196 x 2160, maximum 32767 x 32767
HDMI1 connected 2560x1080+0+0 (0x47) normal (normal left inverted right x axis y axis) 670mm x 280mm
Identifier: 0x43
Timestamp: 6306
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 1
CRTCs: 1 0 2
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff001e6df15985d80400
0c1b010380431c78eaca95a6554ea126
0f5054a54b80714f818081c0a9c0b300
0101010101017e4800e0a0381f404040
3a00a11c21000018023a801871382d40
582c4500a11c2100001e000000fc004c
4720554c545241574944450a000000fd
00384b1e5a18000a202020202020012d
02031cf1499004031412051f01132309
07078301000065030c001000023a8018
71382d40582c450056512100001e011d
8018711c1620582c250056512100009e
011d007251d01e206e28550056512100
001e8c0ad08a20e02d10103e96005651
21000018000000ff003731324e545a4e
39423537330a00000000000000000095
Content Protection: Undesired
supported: Undesired, Desired, Enabled
max bpc: 12
range: (8, 12)
content type: No Data
supported: No Data, Graphics, Photo, Cinema, Game
Colorspace: Default
supported: Default, SMPTE_170M_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, DCI-P3_RGB_Theater
aspect ratio: Automatic
supported: Automatic, 4:3, 16:9
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
audio: auto
supported: force-dvi, off, auto, on
link-status: Good
supported: Good, Bad
non-desktop: 0
range: (0, 1)
2560x1080 (0x47) 185.580MHz -HSync -VSync *current +preferred
h: width 2560 start 2624 end 2688 total 2784 skew 0 clock 66.66KHz
v: height 1080 start 1083 end 1093 total 1111 clock 60.00Hz
1920x1080 (0x48) 148.500MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.50KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.00Hz
1920x1080 (0x17a) 148.500MHz +HSync +VSync
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 56.25KHz
v: height 1080 start 1084 end 1089 total 1125 clock 50.00Hz
1920x1080 (0x17b) 148.352MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.43KHz
v: height 1080 start 1084 end 1089 total 1125 clock 59.94Hz
1920x1080i (0x17c) 74.250MHz +HSync +VSync Interlace
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 33.75KHz
v: height 1080 start 1084 end 1094 total 1125 clock 60.00Hz
1920x1080i (0x17d) 74.250MHz +HSync +VSync Interlace
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 28.12KHz
v: height 1080 start 1084 end 1094 total 1125 clock 50.00Hz
1920x1080i (0x17e) 74.176MHz +HSync +VSync Interlace
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 33.72KHz
v: height 1080 start 1084 end 1094 total 1125 clock 59.94Hz
1680x1050 (0x17f) 119.000MHz +HSync -VSync
h: width 1680 start 1728 end 1760 total 1840 skew 0 clock 64.67KHz
v: height 1050 start 1053 end 1059 total 1080 clock 59.88Hz
1600x900 (0x180) 108.000MHz +HSync +VSync
h: width 1600 start 1624 end 1704 total 1800 skew 0 clock 60.00KHz
v: height 900 start 901 end 904 total 1000 clock 60.00Hz
1280x1024 (0x181) 135.000MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 79.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.02Hz
1280x1024 (0x182) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz
1152x864 (0x183) 108.000MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.50KHz
v: height 864 start 865 end 868 total 900 clock 75.00Hz
1280x720 (0x184) 74.250MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 45.00KHz
v: height 720 start 725 end 730 total 750 clock 60.00Hz
1280x720 (0x185) 74.250MHz +HSync +VSync
h: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.50KHz
v: height 720 start 725 end 730 total 750 clock 50.00Hz
1280x720 (0x186) 74.176MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 44.96KHz
v: height 720 start 725 end 730 total 750 clock 59.94Hz
1024x768 (0x187) 78.750MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.02KHz
v: height 768 start 769 end 772 total 800 clock 75.03Hz
1024x768 (0x188) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
800x600 (0x189) 49.500MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.88KHz
v: height 600 start 601 end 604 total 625 clock 75.00Hz
800x600 (0x18a) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
720x576 (0x18b) 27.000MHz -HSync -VSync
h: width 720 start 732 end 796 total 864 skew 0 clock 31.25KHz
v: height 576 start 581 end 586 total 625 clock 50.00Hz
720x480 (0x18c) 27.027MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.50KHz
v: height 480 start 489 end 495 total 525 clock 60.00Hz
720x480 (0x18d) 27.000MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.47KHz
v: height 480 start 489 end 495 total 525 clock 59.94Hz
640x480 (0x18e) 31.500MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.50KHz
v: height 480 start 481 end 484 total 500 clock 75.00Hz
640x480 (0x18f) 25.200MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.50KHz
v: height 480 start 490 end 492 total 525 clock 60.00Hz
640x480 (0x190) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94Hz
720x400 (0x191) 28.320MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.47KHz
v: height 400 start 412 end 414 total 449 clock 70.08Hz
HDMI2 connected primary 1920x1080+1276+1080 (0x48) normal (normal left inverted right x axis y axis) 510mm x 290mm
Identifier: 0x44
Timestamp: 6306
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 1 0 2
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff000469f92301010101
1916010380331d782edc55a359489e24
115054bfef80d1c0b300a94095009040
81808140714f023a801871382d40582c
4500fd1e1100001f000000ff0043364c
4d464b3031363832370a000000fd0037
4b1e5513000a202020202020000000fc
00415355532056483233380a20200014
Content Protection: Undesired
supported: Undesired, Desired, Enabled
max bpc: 12
range: (8, 12)
content type: No Data
supported: No Data, Graphics, Photo, Cinema, Game
Colorspace: Default
supported: Default, SMPTE_170M_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, DCI-P3_RGB_Theater
aspect ratio: Automatic
supported: Automatic, 4:3, 16:9
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
audio: auto
supported: force-dvi, off, auto, on
link-status: Good
supported: Good, Bad
non-desktop: 0
range: (0, 1)
1920x1080 (0x48) 148.500MHz +HSync +VSync *current +preferred
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.50KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.00Hz
1600x1200 (0x192) 162.000MHz +HSync +VSync
h: width 1600 start 1664 end 1856 total 2160 skew 0 clock 75.00KHz
v: height 1200 start 1201 end 1204 total 1250 clock 60.00Hz
1680x1050 (0x17f) 119.000MHz +HSync -VSync
h: width 1680 start 1728 end 1760 total 1840 skew 0 clock 64.67KHz
v: height 1050 start 1053 end 1059 total 1080 clock 59.88Hz
1400x1050 (0x193) 101.000MHz +HSync -VSync
h: width 1400 start 1448 end 1480 total 1560 skew 0 clock 64.74KHz
v: height 1050 start 1053 end 1057 total 1080 clock 59.95Hz
1280x1024 (0x181) 135.000MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 79.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.02Hz
1280x1024 (0x182) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz
1440x900 (0x194) 88.750MHz +HSync -VSync
h: width 1440 start 1488 end 1520 total 1600 skew 0 clock 55.47KHz
v: height 900 start 903 end 909 total 926 clock 59.90Hz
1280x960 (0x195) 108.000MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.00KHz
v: height 960 start 961 end 964 total 1000 clock 60.00Hz
1152x864 (0x183) 108.000MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.50KHz
v: height 864 start 865 end 868 total 900 clock 75.00Hz
1024x768 (0x187) 78.750MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.02KHz
v: height 768 start 769 end 772 total 800 clock 75.03Hz
1024x768 (0x196) 75.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.48KHz
v: height 768 start 771 end 777 total 806 clock 70.07Hz
1024x768 (0x188) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
832x624 (0x197) 57.284MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.73KHz
v: height 624 start 625 end 628 total 667 clock 74.55Hz
800x600 (0x198) 50.000MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.08KHz
v: height 600 start 637 end 643 total 666 clock 72.19Hz
800x600 (0x189) 49.500MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.88KHz
v: height 600 start 601 end 604 total 625 clock 75.00Hz
800x600 (0x18a) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
800x600 (0x199) 36.000MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.16KHz
v: height 600 start 601 end 603 total 625 clock 56.25Hz
640x480 (0x18e) 31.500MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.50KHz
v: height 480 start 481 end 484 total 500 clock 75.00Hz
640x480 (0x19a) 31.500MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.86KHz
v: height 480 start 489 end 492 total 520 clock 72.81Hz
640x480 (0x19b) 30.240MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.00KHz
v: height 480 start 483 end 486 total 525 clock 66.67Hz
640x480 (0x190) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94Hz
720x400 (0x191) 28.320MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.47KHz
v: height 400 start 412 end 414 total 449 clock 70.08Hz
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x45
Timestamp: 6306
Subpixel: no subpixels
Clones:
CRTCs: 3
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
non-desktop: 0
supported: 0, 1Offline
#2 2019-10-27 10:56:56
- Noeljunior
- Member
- From: Portugal
- Registered: 2016-09-02
- Posts: 9
Re: DP (/VGA) unusable / X hangs if something connected (Intel graphics)
Downgrading xf86-video-intel to 1:2.99.917+865+g60022507-1 still won't work.
Offline
#3 2019-10-27 11:51:22
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 25,234
Re: DP (/VGA) unusable / X hangs if something connected (Intel graphics)
What happens if you remove that xorg config and xf86-video-intel entirely?
Offline
#4 2019-10-27 11:57:39
- Noeljunior
- Member
- From: Portugal
- Registered: 2016-09-02
- Posts: 9
Re: DP (/VGA) unusable / X hangs if something connected (Intel graphics)
Same problem. xrandr still won't show DP.
Offline
#5 2019-10-27 12:15:44
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 25,234
Re: DP (/VGA) unusable / X hangs if something connected (Intel graphics)
Try the LTS kernel? Given the symptoms it sounds like a regression in 5.3
Offline
#6 2019-10-27 22:35:18
- Noeljunior
- Member
- From: Portugal
- Registered: 2016-09-02
- Posts: 9
Re: DP (/VGA) unusable / X hangs if something connected (Intel graphics)
V1del wrote:
Try the LTS kernel? Given the symptoms it sounds like a regression in 5.3
This solved the problem, even if temporary. Thanks!
Should I file a bug report anywhere? And should I consider this as really solved?
Offline
#7 2019-10-27 23:28:49
- loqs
- Member
- Registered: 2014-03-06
- Posts: 18,928
Re: DP (/VGA) unusable / X hangs if something connected (Intel graphics)
Try from the ALA https://archive.archlinux.org/packages/ … pkg.tar.xz
To see ff the issue was introduced by 5.3, I would suggest also testing linux-mainline 5.4-rc4 or drm-tip to see if the issue has already been fixed.
If not then I can provide step by step instructions for bisecting the kernel.
Offline