Arch Linux

0liver

Member

Registered: 2014-05-20

Posts: 35

[usb] device descriptor read/64, error -32

Hi, I have a Lenovo usb-c hub C109 on Lenovo L380. o/w no usb device connected. the following errors appeared only recently after system upgrade ($pacman -Syu). The hub has the following active connections: ethernet, hdmi and PSU. here's journalctl:

usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.3.8-arch1-1 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.3.8-arch1-1 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
usb: port power management may be unreliable
usb 1-2: new high-speed USB device number 2 using xhci_hcd
usb 1-2: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.11
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
usb 1-2: Manufacturer: VIA Labs, Inc.
usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 2-2: New USB device found, idVendor=2109, idProduct=0813, bcdDevice=90.11
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB3.0 Hub
usb 2-2: Manufacturer: VIA Labs, Inc.
usb 1-3: new full-speed USB device number 3 using xhci_hcd
usb 1-3: New USB device found, idVendor=04f2, idProduct=0976, bcdDevice= 1.09
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: Wireless Device
usb 1-3: Manufacturer: Chicony
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Chicony Wireless Device as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:04F2:0976.0001/input/input5
hid-generic 0003:04F2:0976.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony Wireless Device] on usb-0000:00:14.0-3/input0
input: Chicony Wireless Device Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:04F2:0976.0002/input/input6
usb 1-2.3: new full-speed USB device number 4 using xhci_hcd
input: Chicony Wireless Device System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:04F2:0976.0002/input/input7
input: Chicony Wireless Device as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:04F2:0976.0002/input/input8
hid-generic 0003:04F2:0976.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony Wireless Device] on usb-0000:00:14.0-3/input1
input: Chicony Wireless Device as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:04F2:0976.0003/input/input9
hid-generic 0003:04F2:0976.0003: input,hidraw2: USB HID v1.11 Mouse [Chicony Wireless Device] on usb-0000:00:14.0-3/input2
usb 1-2.3: device descriptor read/64, error -32
usb 1-2.3: device descriptor read/64, error -32
usb 1-5: new high-speed USB device number 5 using xhci_hcd
usb 1-5: New USB device found, idVendor=04f2, idProduct=b604, bcdDevice= 0.27
usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-5: Product: Integrated Camera
usb 1-5: Manufacturer: Chicony Electronics Co.,Ltd.
usb 1-5: SerialNumber: 0001
usb 2-2.4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
usb 2-2.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 2-2.4: Product: USB 10/100/1000 LAN
usb 2-2.4: Manufacturer: Realtek
usb 2-2.4: SerialNumber: 000001
usb 1-2.3: new full-speed USB device number 6 using xhci_hcd
usb 1-2.3: device descriptor read/64, error -32
usb 1-2.3: device descriptor read/64, error -32
usb 1-2-port3: attempt power cycle
usb 1-7: new full-speed USB device number 7 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-9: new full-speed USB device number 8 using xhci_hcd
usb 1-9: New USB device found, idVendor=06cb, idProduct=00a2, bcdDevice= 1.64
usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-9: SerialNumber: 720c948667f7
usb 1-2.3: new full-speed USB device number 9 using xhci_hcd
usb 1-2.3: Device not responding to setup address.
usb 1-2.3: Device not responding to setup address.
usb 1-2.3: device not accepting address 9, error -71
usb 1-2.3: new full-speed USB device number 10 using xhci_hcd
usb 1-2.3: Device not responding to setup address.
usb 1-2.3: Device not responding to setup address.
usb 1-2.3: device not accepting address 10, error -71
usb 1-2-port3: unable to enumerate USB device
mtp-probe[557]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3"
mtp-probe[558]: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5"
mtp-probe[563]: checking bus 1, device 8: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9"
mtp-probe[565]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.4"
usbcore: registered new interface driver r8152
usb 2-2.4: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver btusb
input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13
usbcore: registered new interface driver uvcvideo
--

output of $ lsusb -v
see https://pastebin.com/XujC6Jac

--

$ lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
|__ Port 2: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M
|__ Port 4: Dev 3, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
|__ Port 2: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 3: Dev 3, If 2, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 3: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 3: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 5: Dev 5, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 5: Dev 5, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 7: Dev 7, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 7: Dev 7, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 9: Dev 8, If 0, Class=Vendor Specific Class, Driver=, 12M
--

$ dmesg | grep error
[ 3.283546] usb 1-2.3: device descriptor read/64, error -32
[ 3.483500] usb 1-2.3: device descriptor read/64, error -32
[ 4.126836] usb 1-2.3: device descriptor read/64, error -32
[ 4.326839] usb 1-2.3: device descriptor read/64, error -32
[ 5.693458] usb 1-2.3: device not accepting address 9, error -71
[ 6.196785] usb 1-2.3: device not accepting address 10, error -71
[ 15.179463] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 15.528480] tps6598x: probe of i2c-INT3515:02-tps6598x.1 failed with error -22

theses errors display already at boot time: https://photos.app.goo.gl/44Xjd7158joq86Pw7

but the system boots and works. apart from (since more recently) that Bluetooth no longer sees any devices - as reported in different post

Last edited by 0liver (2019-11-08 10:12:21)

0liver

Member

Registered: 2014-05-20

Posts: 35

Re: [usb] device descriptor read/64, error -32

resolved: after remplacement of Lenovo usb-c hub C109 the error disappeared