Arch Linux

Dzirik

Member

Registered: 2020-03-16

Posts: 2

Audio pops with USB sound card (Focusrite Scarlett 4i4)

Hello guys,

I have a problem with my sound card. When I'm listening to something (music, video...), there is a pop every few seconds. It happens on the speakers as well as on the headphones. It is not a hardware problem as it works perfectly in Linux Mint/Windows. It also has the same problem on my notebook, which is not that surprising considering it is almost the same setup. 3.5mm jack on the notebook works perfectly.

Things I tried

https://wiki.archlinux.org/index.php/Pu … _crackling
https://wiki.archlinux.org/index.php/Pu … PulseAudio
Completely uninstalling PulseAudio and using Jack2/Cadence

Working theory

My guess is it probably has something to do with buffer size. When I tried to screw with it, it gets worse. Also, when you try to divide device.buffering.buffer_size, you don't get a rounded number. Maybe there is a way to change it? Also, I don't know if this is important, but alsamixer prints "This sound device does not have any controls.". Any suggestions?

Sink #0
	State: RUNNING
	Name: alsa_output.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00.analog-surround-40
	Description: Scarlett 4i4 USB Analog Surround 4.0
	Driver: module-alsa-card.c
	Sample Specification: s32le 4ch 44100Hz
	Channel Map: front-left,front-right,rear-left,rear-right
	Owner Module: 7
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB,   rear-left: 65536 / 100% / 0.00 dB,   rear-right: 65536 / 100% / 0.00 dB
	       balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00.analog-surround-40.monitor
	Latency: 52569 usec, configured 60000 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.resolution_bits = "32"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "Scarlett 4i4 USB"
		alsa.long_card_name = "Focusrite Scarlett 4i4 USB at usb-0000:00:14.0-5.2, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:5.2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.0/sound/card2"
		udev.id = "usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00"
		device.bus = "usb"
		device.vendor.id = "1235"
		device.vendor.name = "Focusrite-Novation"
		device.product.id = "8212"
		device.product.name = "Scarlett 4i4 USB"
		device.serial = "Focusrite_Scarlett_4i4_USB_D8MWU0E9605607"
		device.string = "surround40:2"
		device.buffering.buffer_size = "1048576"
		device.buffering.fragment_size = "524288"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-surround-40"
		device.profile.description = "Analog Surround 4.0"
		device.description = "Scarlett 4i4 USB Analog Surround 4.0"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB1235:8212"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	Ports:
		analog-output: Analog Output (priority: 9900)
	Active Port: analog-output
	Formats:
		pcm

I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 13.0
I: [pulseaudio] main.c: Page size is 4096 bytes
I: [pulseaudio] main.c: Machine ID is d19eec38ea9a437583f841a43e9b173b.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/jirik/.pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-13.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: System supports high resolution timers
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/jirik/.pulse/d19eec38ea9a437583f841a43e9b173b-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/jirik/.pulse/d19eec38ea9a437583f841a43e9b173b-stream-volumes'.
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/jirik/.pulse/d19eec38ea9a437583f841a43e9b173b-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm2/HDA NVidia/HDA NVidia.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA NVidia
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA NVidia use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA NVidia
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:1: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,1: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,2: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,3
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,3: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,4
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,4: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,5
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,5: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,6
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,6: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,6
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,6: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,6
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,6: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,6
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,6: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,7
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,7: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] card.c: alsa_card.pci-0000_01_00.1: active_profile: off
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1 (alsa_card.pci-0000_01_00.1) module loaded.
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm2/Scarlett 4i4 USB/Scarlett 4i4 USB.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card Scarlett 4i4 USB
I: [pulseaudio] (alsa-lib)main.c: error: failed to import Scarlett 4i4 USB use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card Scarlett 4i4 USB
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:front:2: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:front:2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround21:2: Invalid argument
I: [pulseaudio] alsa-util.c: Device surround40:2 doesn't support sample format s16le, changed to s32le.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround40:2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround40:2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:2'
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround41:2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround50:2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround51:2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround71:2: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:2
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,7: No such file or directory
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 4 channels, changed to 6.
I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support sample format s16le, changed to s32le.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:2'
I: [pulseaudio] alsa-util.c: Device surround40:2 doesn't support sample format s16le, changed to s32le.
I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support sample format s16le, changed to s32le.
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00.
I: [pulseaudio] card.c: alsa_card.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00: active_profile: output:analog-surround-40+input:multichannel-input
I: [pulseaudio] module-card-restore.c: Restoring profile 'output:analog-surround-40+input:multichannel-input' for card alsa_card.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00.
I: [pulseaudio] card.c: Created 1 "alsa_card.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00"
I: [pulseaudio] alsa-util.c: Cannot disable ALSA period wakeups
I: [pulseaudio] alsa-util.c: Device surround40:2 doesn't support sample format s16le, changed to s32le.
I: [pulseaudio] alsa-util.c: ALSA period wakeups were not disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device surround40:2.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Surround 4.0' (analog-surround-40).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround40:2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround40:2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:2'
I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00.analog-surround-40.
I: [pulseaudio] module-device-restore.c: Restoring volume for sink alsa_output.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00.analog-surround-40: front-left: 65536 / 100%,   front-right: 65536 / 100%,   rear-left: 65536 / 100%,   rear-right: 65536 / 100%
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00.analog-surround-40" with sample spec s32le 4ch 44100Hz and channel map front-left,front-right,rear-left,rear-right
I: [pulseaudio] sink.c:     alsa.resolution_bits = "32"
I: [pulseaudio] sink.c:     device.api = "alsa"
I: [pulseaudio] sink.c:     device.class = "sound"
I: [pulseaudio] sink.c:     alsa.class = "generic"
I: [pulseaudio] sink.c:     alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c:     alsa.name = "USB Audio"
I: [pulseaudio] sink.c:     alsa.id = "USB Audio"
I: [pulseaudio] sink.c:     alsa.subdevice = "0"
I: [pulseaudio] sink.c:     alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c:     alsa.device = "0"
I: [pulseaudio] sink.c:     alsa.card = "2"
I: [pulseaudio] sink.c:     alsa.card_name = "Scarlett 4i4 USB"
I: [pulseaudio] sink.c:     alsa.long_card_name = "Focusrite Scarlett 4i4 USB at usb-0000:00:14.0-5.2, high speed"
I: [pulseaudio] sink.c:     alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] sink.c:     device.bus_path = "pci-0000:00:14.0-usb-0:5.2:1.0"
I: [pulseaudio] sink.c:     sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.0/sound/card2"
I: [pulseaudio] sink.c:     udev.id = "usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00"
I: [pulseaudio] sink.c:     device.bus = "usb"
I: [pulseaudio] sink.c:     device.vendor.id = "1235"
I: [pulseaudio] sink.c:     device.vendor.name = "Focusrite-Novation"
I: [pulseaudio] sink.c:     device.product.id = "8212"
I: [pulseaudio] sink.c:     device.product.name = "Scarlett 4i4 USB"
I: [pulseaudio] sink.c:     device.serial = "Focusrite_Scarlett_4i4_USB_D8MWU0E9605607"
I: [pulseaudio] sink.c:     device.string = "surround40:2"
I: [pulseaudio] sink.c:     device.buffering.buffer_size = "1048576"
I: [pulseaudio] sink.c:     device.buffering.fragment_size = "524288"
I: [pulseaudio] sink.c:     device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c:     device.profile.name = "analog-surround-40"
I: [pulseaudio] sink.c:     device.profile.description = "Analog Surround 4.0"
I: [pulseaudio] sink.c:     device.description = "Scarlett 4i4 USB Analog Surround 4.0"
I: [pulseaudio] sink.c:     alsa.mixer_name = "USB Mixer"
I: [pulseaudio] sink.c:     alsa.components = "USB1235:8212"
I: [pulseaudio] sink.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c:     device.icon_name = "audio-card-usb"
I: [pulseaudio] source.c: Created source 0 "alsa_output.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00.analog-surround-40.monitor" with sample spec s32le 4ch 44100Hz and channel map front-left,front-right,rear-left,rear-right
I: [pulseaudio] source.c:     device.description = "Monitor of Scarlett 4i4 USB Analog Surround 4.0"
I: [pulseaudio] source.c:     device.class = "monitor"
I: [pulseaudio] source.c:     alsa.card = "2"
I: [pulseaudio] source.c:     alsa.card_name = "Scarlett 4i4 USB"
I: [pulseaudio] source.c:     alsa.long_card_name = "Focusrite Scarlett 4i4 USB at usb-0000:00:14.0-5.2, high speed"
I: [pulseaudio] source.c:     alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] source.c:     device.bus_path = "pci-0000:00:14.0-usb-0:5.2:1.0"
I: [pulseaudio] source.c:     sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.0/sound/card2"
I: [pulseaudio] source.c:     udev.id = "usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00"
I: [pulseaudio] source.c:     device.bus = "usb"
I: [pulseaudio] source.c:     device.vendor.id = "1235"
I: [pulseaudio] source.c:     device.vendor.name = "Focusrite-Novation"
I: [pulseaudio] source.c:     device.product.id = "8212"
I: [pulseaudio] source.c:     device.product.name = "Scarlett 4i4 USB"
I: [pulseaudio] source.c:     device.serial = "Focusrite_Scarlett_4i4_USB_D8MWU0E9605607"
I: [pulseaudio] source.c:     device.string = "2"
I: [pulseaudio] source.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] source.c:     device.icon_name = "audio-card-usb"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 524288 bytes (743.04ms), buffer size is 1048576 bytes (1486.08ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 5.03ms
I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
I: [alsa-sink-USB Audio] util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-USB Audio] alsa-sink.c: Starting playback.
I: [pulseaudio] core.c: default_source: (unset) -> alsa_output.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00.analog-surround-40.monitor
I: [pulseaudio] core.c: default_sink: (unset) -> alsa_output.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00.analog-surround-40
I: [pulseaudio] alsa-util.c: Cannot disable ALSA period wakeups
I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support sample format s16le, changed to s32le.
I: [pulseaudio] alsa-util.c: ALSA period wakeups were not disabled
I: [pulseaudio] alsa-source.c: Successfully opened device hw:2.
I: [pulseaudio] alsa-source.c: Selected mapping 'Multichannel' (multichannel-input).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:2'
I: [pulseaudio] module-device-restore.c: Restoring port for source source:alsa_input.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00.multichannel-input.
I: [pulseaudio] source.c: Created source 1 "alsa_input.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00.multichannel-input" with sample spec s32le 6ch 44100Hz and channel map front-left,front-right,rear-left,rear-right,front-center,lfe
I: [pulseaudio] source.c:     alsa.resolution_bits = "32"
I: [pulseaudio] source.c:     device.api = "alsa"
I: [pulseaudio] source.c:     device.class = "sound"
I: [pulseaudio] source.c:     alsa.class = "generic"
I: [pulseaudio] source.c:     alsa.subclass = "generic-mix"
I: [pulseaudio] source.c:     alsa.name = "USB Audio"
I: [pulseaudio] source.c:     alsa.id = "USB Audio"
I: [pulseaudio] source.c:     alsa.subdevice = "0"
I: [pulseaudio] source.c:     alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c:     alsa.device = "0"
I: [pulseaudio] source.c:     alsa.card = "2"
I: [pulseaudio] source.c:     alsa.card_name = "Scarlett 4i4 USB"
I: [pulseaudio] source.c:     alsa.long_card_name = "Focusrite Scarlett 4i4 USB at usb-0000:00:14.0-5.2, high speed"
I: [pulseaudio] source.c:     alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] source.c:     device.bus_path = "pci-0000:00:14.0-usb-0:5.2:1.0"
I: [pulseaudio] source.c:     sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.0/sound/card2"
I: [pulseaudio] source.c:     udev.id = "usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00"
I: [pulseaudio] source.c:     device.bus = "usb"
I: [pulseaudio] source.c:     device.vendor.id = "1235"
I: [pulseaudio] source.c:     device.vendor.name = "Focusrite-Novation"
I: [pulseaudio] source.c:     device.product.id = "8212"
I: [pulseaudio] source.c:     device.product.name = "Scarlett 4i4 USB"
I: [pulseaudio] source.c:     device.serial = "Focusrite_Scarlett_4i4_USB_D8MWU0E9605607"
I: [pulseaudio] source.c:     device.string = "hw:2"
I: [pulseaudio] source.c:     device.buffering.buffer_size = "1048560"
I: [pulseaudio] source.c:     device.buffering.fragment_size = "524280"
I: [pulseaudio] source.c:     device.access_mode = "mmap+timer"
I: [pulseaudio] source.c:     device.profile.name = "multichannel-input"
I: [pulseaudio] source.c:     device.profile.description = "Multichannel"
I: [pulseaudio] source.c:     device.description = "Scarlett 4i4 USB Multichannel"
I: [pulseaudio] source.c:     alsa.mixer_name = "USB Mixer"
I: [pulseaudio] source.c:     alsa.components = "USB1235:8212"
I: [pulseaudio] source.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] source.c:     device.icon_name = "audio-card-usb"
I: [pulseaudio] alsa-source.c: Using 2.0 fragments of size 524280 bytes (495.35ms), buffer size is 1048560 bytes (990.70ms)
I: [pulseaudio] alsa-source.c: Time scheduling watermark is 3.99ms
I: [pulseaudio] alsa-source.c: Driver does not support hardware volume control, falling back to software volume control.
I: [pulseaudio] alsa-source.c: Driver does not support hardware mute control, falling back to software mute control.
I: [alsa-source-USB Audio] util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source-USB Audio] alsa-source.c: Starting capture.
I: [pulseaudio] core.c: default_source: alsa_output.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00.analog-surround-40.monitor -> alsa_input.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00.multichannel-input
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="2" name="usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00" card_name="alsa_card.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.0/sound/card2 (alsa_card.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00) module loaded.
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm2/HDA Intel PCH/HDA Intel PCH.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA Intel PCH
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA Intel PCH use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA Intel PCH
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround21:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround21:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround40:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround40:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround41:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround41:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround50:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround50:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround51:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround51:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL iec958:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer iec958:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,1: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,2: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,3
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,3: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,4: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,4: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,4: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,4
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,4: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,5: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,5: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,5: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,5
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,5: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,6: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,6: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,6
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,6: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,7: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,7: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,7
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,7: No such file or directory
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_00_1f.3.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] card.c: alsa_card.pci-0000_00_1f.3: active_profile: output:iec958-stereo+input:analog-stereo
I: [pulseaudio] card.c: Created 2 "alsa_card.pci-0000_00_1f.3"
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device iec958:0.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (IEC958)' (iec958-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL iec958:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer iec958:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_00_1f.3.iec958-stereo.
I: [pulseaudio] sink.c: Created sink 1 "alsa_output.pci-0000_00_1f.3.iec958-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c:     alsa.resolution_bits = "16"
I: [pulseaudio] sink.c:     device.api = "alsa"
I: [pulseaudio] sink.c:     device.class = "sound"
I: [pulseaudio] sink.c:     alsa.class = "generic"
I: [pulseaudio] sink.c:     alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c:     alsa.name = "ALC892 Digital"
I: [pulseaudio] sink.c:     alsa.id = "ALC892 Digital"
I: [pulseaudio] sink.c:     alsa.subdevice = "0"
I: [pulseaudio] sink.c:     alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c:     alsa.device = "1"
I: [pulseaudio] sink.c:     alsa.card = "0"
I: [pulseaudio] sink.c:     alsa.card_name = "HDA Intel PCH"
I: [pulseaudio] sink.c:     alsa.long_card_name = "HDA Intel PCH at 0xef340000 irq 139"
I: [pulseaudio] sink.c:     alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c:     device.bus_path = "pci-0000:00:1f.3"
I: [pulseaudio] sink.c:     sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
I: [pulseaudio] sink.c:     device.bus = "pci"
I: [pulseaudio] sink.c:     device.vendor.id = "8086"
I: [pulseaudio] sink.c:     device.vendor.name = "Intel Corporation"
I: [pulseaudio] sink.c:     device.product.id = "a170"
I: [pulseaudio] sink.c:     device.product.name = "100 Series/C230 Series Chipset Family HD Audio Controller"
I: [pulseaudio] sink.c:     device.form_factor = "internal"
I: [pulseaudio] sink.c:     device.string = "iec958:0"
I: [pulseaudio] sink.c:     device.buffering.buffer_size = "352800"
I: [pulseaudio] sink.c:     device.buffering.fragment_size = "176400"
I: [pulseaudio] sink.c:     device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c:     device.profile.name = "iec958-stereo"
I: [pulseaudio] sink.c:     device.profile.description = "Digital Stereo (IEC958)"
I: [pulseaudio] sink.c:     device.description = "Built-in Audio Digital Stereo (IEC958)"
I: [pulseaudio] sink.c:     alsa.mixer_name = "Realtek ALC892"
I: [pulseaudio] sink.c:     alsa.components = "HDA:10ec0892,1458a182,00100302"
I: [pulseaudio] sink.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c:     device.icon_name = "audio-card-pci"
I: [pulseaudio] source.c: Created source 2 "alsa_output.pci-0000_00_1f.3.iec958-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c:     device.description = "Monitor of Built-in Audio Digital Stereo (IEC958)"
I: [pulseaudio] source.c:     device.class = "monitor"
I: [pulseaudio] source.c:     alsa.card = "0"
I: [pulseaudio] source.c:     alsa.card_name = "HDA Intel PCH"
I: [pulseaudio] source.c:     alsa.long_card_name = "HDA Intel PCH at 0xef340000 irq 139"
I: [pulseaudio] source.c:     alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c:     device.bus_path = "pci-0000:00:1f.3"
I: [pulseaudio] source.c:     sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
I: [pulseaudio] source.c:     device.bus = "pci"
I: [pulseaudio] source.c:     device.vendor.id = "8086"
I: [pulseaudio] source.c:     device.vendor.name = "Intel Corporation"
I: [pulseaudio] source.c:     device.product.id = "a170"
I: [pulseaudio] source.c:     device.product.name = "100 Series/C230 Series Chipset Family HD Audio Controller"
I: [pulseaudio] source.c:     device.form_factor = "internal"
I: [pulseaudio] source.c:     device.string = "0"
I: [pulseaudio] source.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] source.c:     device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
I: [pulseaudio] alsa-sink.c: Using hardware mute control.
I: [alsa-sink-ALC892 Digital] util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-ALC892 Digital] alsa-sink.c: Starting playback.
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-source.c: Successfully opened device front:0.
I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] module-device-restore.c: Restoring port for source source:alsa_input.pci-0000_00_1f.3.analog-stereo.
I: [pulseaudio] source.c: Created source 3 "alsa_input.pci-0000_00_1f.3.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c:     alsa.resolution_bits = "16"
I: [pulseaudio] source.c:     device.api = "alsa"
I: [pulseaudio] source.c:     device.class = "sound"
I: [pulseaudio] source.c:     alsa.class = "generic"
I: [pulseaudio] source.c:     alsa.subclass = "generic-mix"
I: [pulseaudio] source.c:     alsa.name = "ALC892 Analog"
I: [pulseaudio] source.c:     alsa.id = "ALC892 Analog"
I: [pulseaudio] source.c:     alsa.subdevice = "0"
I: [pulseaudio] source.c:     alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c:     alsa.device = "0"
I: [pulseaudio] source.c:     alsa.card = "0"
I: [pulseaudio] source.c:     alsa.card_name = "HDA Intel PCH"
I: [pulseaudio] source.c:     alsa.long_card_name = "HDA Intel PCH at 0xef340000 irq 139"
I: [pulseaudio] source.c:     alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c:     device.bus_path = "pci-0000:00:1f.3"
I: [pulseaudio] source.c:     sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
I: [pulseaudio] source.c:     device.bus = "pci"
I: [pulseaudio] source.c:     device.vendor.id = "8086"
I: [pulseaudio] source.c:     device.vendor.name = "Intel Corporation"
I: [pulseaudio] source.c:     device.product.id = "a170"
I: [pulseaudio] source.c:     device.product.name = "100 Series/C230 Series Chipset Family HD Audio Controller"
I: [pulseaudio] source.c:     device.form_factor = "internal"
I: [pulseaudio] source.c:     device.string = "front:0"
I: [pulseaudio] source.c:     device.buffering.buffer_size = "352800"
I: [pulseaudio] source.c:     device.buffering.fragment_size = "176400"
I: [pulseaudio] source.c:     device.access_mode = "mmap+timer"
I: [pulseaudio] source.c:     device.profile.name = "analog-stereo"
I: [pulseaudio] source.c:     device.profile.description = "Analog Stereo"
I: [pulseaudio] source.c:     device.description = "Built-in Audio Analog Stereo"
I: [pulseaudio] source.c:     alsa.mixer_name = "Realtek ALC892"
I: [pulseaudio] source.c:     alsa.components = "HDA:10ec0892,1458a182,00100302"
I: [pulseaudio] source.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] source.c:     device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-source.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-source.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-source.c: Hardware volume ranges from -16.00 dB to 60.00 dB.
I: [pulseaudio] alsa-source.c: Fixing base volume to -60.00 dB
I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-source.c: Using hardware mute control.
I: [alsa-source-ALC892 Analog] util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source-ALC892 Analog] alsa-source.c: Starting capture.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #8; argument: "device_id="0" name="pci-0000_00_1f.3" card_name="alsa_card.pci-0000_00_1f.3" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1f.3/sound/card0 (alsa_card.pci-0000_00_1f.3) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 3 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #9; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #11; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #12; argument: "").
I: [pulseaudio] socket-server.c: Found socket activation socket for '/run/user/1000/pulse/native' \o/
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #13; argument: "").
I: [pulseaudio] module.c: Loaded "module-gsettings" (index: #14; argument: "").
I: [pulseaudio] module-default-device-restore.c: Restoring default sink 'jack_out'.
I: [pulseaudio] core.c: configured_default_sink: (unset) -> jack_out
I: [pulseaudio] module-default-device-restore.c: Restoring default source 'jack_in'.
I: [pulseaudio] core.c: configured_default_source: (unset) -> jack_in
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #16; argument: "").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #18; argument: "").
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #19; argument: "").
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #20; argument: "").
I: [pulseaudio] client.c: Created 0 "Login Session 2"
I: [pulseaudio] core.c: exit_idle_time: 20 -> 0
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #21; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #22; argument: "").
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #23; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #24; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #25; argument: "").
I: [pulseaudio] main.c: Daemon startup complete.
I: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
I: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Created 3 "Native client (UNIX socket client)"
I: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Created 4 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] sink-input.c: Trying to change sample spec
I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
I: [pulseaudio] remap.c: Using 4-channel arrange remapping
I: [pulseaudio] sink-input.c: Created input 0 "audio stream" on alsa_output.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00.analog-surround-40 with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink-input.c:     media.icon_name = "mpv"
I: [pulseaudio] sink-input.c:     media.name = "audio stream"
I: [pulseaudio] sink-input.c:     application.name = "mpv Media Player"
I: [pulseaudio] sink-input.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] sink-input.c:     native-protocol.version = "33"
I: [pulseaudio] sink-input.c:     application.process.id = "3374"
I: [pulseaudio] sink-input.c:     application.process.user = "jirik"
I: [pulseaudio] sink-input.c:     application.process.host = "BlackJesus"
I: [pulseaudio] sink-input.c:     application.process.binary = "mpv"
I: [pulseaudio] sink-input.c:     application.language = "C"
I: [pulseaudio] sink-input.c:     window.x11.display = ":0"
I: [pulseaudio] sink-input.c:     application.process.machine_id = "d19eec38ea9a437583f841a43e9b173b"
I: [pulseaudio] sink-input.c:     application.process.session_id = "2"
I: [pulseaudio] sink-input.c:     application.icon_name = "mpv"
I: [pulseaudio] sink-input.c:     module-stream-restore.id = "sink-input-by-application-name:mpv Media Player"
I: [pulseaudio] protocol-native.c: Requested tlength=100.00 ms, minreq=20.00 ms
I: [pulseaudio] protocol-native.c: Final latency 160.00 ms = 60.00 ms + 2*20.00 ms + 60.00 ms
I: [pulseaudio] client.c: Freed 4 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 5 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 5 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1f.3.analog-stereo idle for too long, suspending ...
I: [alsa-source-ALC892 Analog] alsa-source.c: Device suspended...
I: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.usb-Focusrite_Scarlett_4i4_USB_D8MWU0E9605607-00.multichannel-input idle for too long, suspending ...
I: [alsa-source-USB Audio] alsa-source.c: Device suspended...
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1f.3.iec958-stereo idle for too long, suspending ...
I: [alsa-sink-ALC892 Digital] alsa-sink.c: Device suspended...
I: [pulseaudio] client.c: Created 6 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 6 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 7 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 7 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 8 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 8 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 9 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 9 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 10 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 10 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 11 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 11 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 12 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 12 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 13 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 13 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 14 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 14 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 15 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 15 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 16 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 16 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 17 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 17 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 18 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 18 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 19 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 19 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 20 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 20 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 21 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 21 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 22 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 22 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 23 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 23 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 24 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 24 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 25 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 25 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 26 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 26 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 27 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 27 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 28 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 28 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 29 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 29 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 30 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 30 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 31 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 31 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 32 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 32 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 33 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 33 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 34 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 34 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 35 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 35 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 36 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 36 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 37 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 37 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 38 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 38 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 39 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 39 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 40 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 40 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 41 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 41 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 42 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 42 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 43 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 43 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 44 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 44 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 45 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 45 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 46 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 46 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 47 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 47 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 48 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 48 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 49 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 49 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 50 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 50 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 51 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 51 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 52 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 52 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 53 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 53 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 54 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 54 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 55 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 55 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 56 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 56 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 57 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 57 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 58 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 58 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 59 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 59 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 60 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 60 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 61 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 61 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 62 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 62 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 63 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 63 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 64 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 64 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 65 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 65 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 66 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 66 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 67 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 67 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 68 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 68 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 69 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 69 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 70 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 70 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 71 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 71 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 72 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 72 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 73 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 73 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 74 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 74 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 75 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 75 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 76 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 76 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 77 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 77 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 78 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 78 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 79 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 79 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 80 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 80 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 81 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 81 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 82 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 82 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 83 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 83 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 84 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 84 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 85 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 85 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 86 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 86 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 87 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 87 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 88 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 88 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 89 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 89 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 90 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 90 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 91 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 91 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 92 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 92 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 93 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 93 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 94 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 94 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 95 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 95 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 96 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 96 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 97 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 97 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 98 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 98 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 99 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 99 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 100 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 100 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 101 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 101 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 102 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 102 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 103 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 103 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 104 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 104 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 105 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 105 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 106 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 106 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 107 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 107 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 108 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=998 success=1
I: [pulseaudio] client.c: Freed 108 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.

Dzirik

Member

Registered: 2020-03-16

Posts: 2

Re: Audio pops with USB sound card (Focusrite Scarlett 4i4)

UPDATE: so I've installed Linux Mint today and tested it (without any other USB device connected). It also pops, but more quietly, I'd just hadn't noticed before. I guess I'll try to tinker with jack and qjackctl now.