You are not logged in.

Pages: 1 2

#1 2020-03-19 00:09:44

salonkommunist
Member
From: Germany
Registered: 2020-02-18
Posts: 36

[solved] Detach a window from suckless' tabbed

Hi,

I am looking for a clean way to remove (i.e. detach, not close) a window from suckless' tabbed. After some reading, I believe xdotool is the way to go, but please do correct me on this. Attaching a window to an instance of tabbed works fine like so:

xdotool windowreparent <windowID> <tabbedWindowID>

However, removing a window gives me trouble. Here's how I am doing it:

xdotool windowreparent <childOfTabbedID> <rootWindowID>

This will only partially do what I want; the window will spawn separate from tabbed, but tabbed will fail to close its pertaining tab. Furthermore, the now detached window will flicker erratically.

Is there a clean way to achieve what I want?

Last edited by salonkommunist (2020-04-09 02:23:33)

Offline

#2 2020-03-19 06:17:40

seth
Member
Registered: 2012-09-03
Posts: 51,029

Re: [solved] Detach a window from suckless' tabbed

Looking at the tabbed code, unmapping the window should unmanage it, so unmap, reparent, map?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2020-03-19 11:07:57

salonkommunist
Member
From: Germany
Registered: 2020-02-18
Posts: 36

Re: [solved] Detach a window from suckless' tabbed

No, I am afraid that did not work. Here is what I did:

xdotool windowunmap <childOfTabbedID>
xdotool windowreparent <childOfTabbedID> <rootWindowID>
xdotool windowmap <childOfTabbedID>

The behavior is exactly the same as before, i.e. when simply reparenting to the root window.

Offline

#4 2020-03-19 12:35:27

seth
Member
Registered: 2012-09-03
Posts: 51,029

Re: [solved] Detach a window from suckless' tabbed

Do you use any patches?
I just tried tabbed and just reparenting the window will remove it from the stack fine and tabbed removes the tab (there's also no flicker)

Did you ensure to operate on the proper window IDs ("xwininfo -tree" on the tabbed window)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2020-03-19 16:46:38

salonkommunist
Member
From: Germany
Registered: 2020-02-18
Posts: 36

Re: [solved] Detach a window from suckless' tabbed

I use a different method to get the tabbed container <windowID>, namely bspwm's

bspc query -N -n [arg]

However, I just checked the result against

xwininfo -tree

and it is the same.

I am using tabbed 0.6-3 from the Arch repo's community section rather than a self-compiled version. I am not sure which patches, if any, have been applied to the Arch repo version.

Last edited by salonkommunist (2020-03-19 16:48:00)

Offline

#6 2020-03-19 16:50:49

seth
Member
Registered: 2012-09-03
Posts: 51,029

Re: [solved] Detach a window from suckless' tabbed

None it seems, https://git.archlinux.org/svntogit/comm … ges/tabbed

Can you please post your entire command I/O (the xwininfo tree, the output of "xwininfo -root" and the xdotool commands, incl. the WId's, to reparent the window)?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2020-03-19 17:07:29

salonkommunist
Member
From: Germany
Registered: 2020-02-18
Posts: 36

Re: [solved] Detach a window from suckless' tabbed

Yes, of course:

xwininfo -tree on the tabbed window:

$ xwininfo -tree

xwininfo: Please select the window about which you
          would like information by clicking the
          mouse in that window.

xwininfo: Window id: 0x1800003 (has no name)

  Root window id: 0x6be (the root window) (has no name)
  Parent window id: 0x6be (the root window) (has no name)
     2 children:
     0x140000a "matze@PC:~": ("urxvt" "URxvt")  901x506+0+20  +1006+59
        1 child:
        0x140000f (has no name): ()  890x483+2+2  +1008+61
     0x160000a "matze@PC:~": ("urxvt" "URxvt")  901x466+0+20  +1006+59
        1 child:
        0x160000f (has no name): ()  890x462+2+2  +1008+61
$ xdotool windowunmap 0x140000a
$ xdotool windowreparent 0x140000a 0x6be
$ xdotool windowmap 0x140000a

Edit: Adding the xwininfo -root output.

$ xwininfo -root

xwininfo: Window id: 0x6be (the root window) (has no name)

  Absolute upper-left X:  0
  Absolute upper-left Y:  0
  Relative upper-left X:  0
  Relative upper-left Y:  0
  Width: 1920
  Height: 1080
  Depth: 24
  Visual: 0x21
  Visual Class: TrueColor
  Border width: 0
  Class: InputOutput
  Colormap: 0x20 (installed)
  Bit Gravity State: ForgetGravity
  Window Gravity State: NorthWestGravity
  Backing Store State: NotUseful
  Save Under State: no
  Map State: IsViewable
  Override Redirect State: no
  Corners:  +0+0  -0+0  -0-0  +0-0
  -geometry 1920x1080+0+0

Last edited by salonkommunist (2020-03-19 17:44:55)

Offline

#8 2020-03-19 21:30:27

seth
Member
Registered: 2012-09-03
Posts: 51,029

Re: [solved] Detach a window from suckless' tabbed

That's all perfectly fine…

1. Since it's urxvt, is it maybe an argb window?
2. What's your (main) window manager?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#9 2020-03-19 21:49:13

salonkommunist
Member
From: Germany
Registered: 2020-02-18
Posts: 36

Re: [solved] Detach a window from suckless' tabbed

1.) I am sorry, I don't know what an argb window is or how it differs from other types of windows.*

2.) I use bspwm as my WM.


*) A quick search suggests this has to do with transparency? Indeed, there is a difference when I try it with a non-transparent window: The flicker will not occur. However, tabbed still won't close the pertaining tab.

Edit: After a little more trying, it seems that the detached window will not catch every single keystroke when I enter text in it. Whenever such a glitch happens, the window will very briefly be visible inside the now empty tabbed tab. So it seems that the "flicker" issue still persists even without transparency, albeit less visible.

Last edited by salonkommunist (2020-03-19 22:09:52)

Offline

#10 2020-03-19 22:07:39

seth
Member
Registered: 2012-09-03
Posts: 51,029

Re: [solved] Detach a window from suckless' tabbed

Try "urxvt -depth 24", but if you can explain away the flicker, the pertaining tab does not seem to relate to the WM passing the window back to tabbed.
Trying a different WM (openbox, fluxbox) or no WM at all might still be worth a shot to investigate the cause.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#11 2020-03-19 22:15:04

salonkommunist
Member
From: Germany
Registered: 2020-02-18
Posts: 36

Re: [solved] Detach a window from suckless' tabbed

Unfortunately, using "urxvt -depth 24" did not do anything for me. Also, the flicker has not stopped, please see the edit in my previous post. Sorry for the confusion.

Offline

#12 2020-03-19 22:20:18

seth
Member
Registered: 2012-09-03
Posts: 51,029

Re: [solved] Detach a window from suckless' tabbed

Along the input issues, I'd even more look at the WMs role here…
(You could also try tabbed in a xephyr nested server)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#13 2020-03-19 23:03:46

salonkommunist
Member
From: Germany
Registered: 2020-02-18
Posts: 36

Re: [solved] Detach a window from suckless' tabbed

Allright, I took both openbox and fluxbox for a spin. The behavior is the exact same as under bspwm.

Now for the interesting part: I launched a nested X server like so:

$ Xephyr -br -ac -noreset :1
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Internal error:   Could not resolve keysym XF86FullScreen
Errors from xkbcomp are not fatal to the X server

and then

$ DISPLAY=:1 urxvt &
[1] 2137
$ DISPLAY=:1 urxvt &
[2] 2141

Inside the nested X environment, I successfully attached and detached URxvt to and from tabbed without any issues.

So the problem seems to be with my X server, then?


Edit: I also tried killing compton before even launching tabbed. This made no difference.

Last edited by salonkommunist (2020-03-19 23:21:46)

Offline

#14 2020-03-20 11:38:04

seth
Member
Registered: 2012-09-03
Posts: 51,029

Re: [solved] Detach a window from suckless' tabbed

So the problem seems to be with my X server, then?

I suspect something else™ semi-manages clients (skippy, some taskbar,  …) and interferes with reparenting (causing it to fail and seemingly keep the tab while in reality, the window is probably constantly un-/re-tabbed)

Did you try an empty session?
Output of 

loginctl session-status

for some happy blame-game.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#15 2020-03-20 17:23:19

salonkommunist
Member
From: Germany
Registered: 2020-02-18
Posts: 36

Re: [solved] Detach a window from suckless' tabbed

OK, I disabled anything that came to mind. The issue persists; here is the requested output:

$ loginctl session-status
1 - matze (1000)
	   Since: Fri 2020-03-20 18:16:03 CET; 5min ago
	  Leader: 801 (login)
	    Seat: seat0; vc1
	     TTY: tty1
	 Service: login; type tty; class user
	   State: active
	    Unit: session-1.scope
		  ├─ 801 login -- matze
		  ├─ 865 -bash
		  ├─ 872 /bin/sh /usr/bin/startx
		  ├─ 894 xinit /home/matze/.xinitrc -- /etc/X11/xinit/xserverrc :0 vt1 -keeptty -auth /tmp/serverauth.5xJWZ0ystW
		  ├─ 895 /usr/lib/Xorg -nolisten tcp :0 vt1 -keeptty -auth /tmp/serverauth.5xJWZ0ystW
		  ├─ 914 bspwm
		  ├─ 917 sxhkd
		  ├─1237 urxvt
		  ├─1238 bash
		  └─1241 loginctl session-status

Mar 20 18:16:03 PC login[801]: LOGIN ON tty1 BY matze
Mar 20 18:16:03 PC systemd[1]: Started Session 1 of user matze.

Offline

#16 2020-03-21 15:19:32

seth
Member
Registered: 2012-09-03
Posts: 51,029

Re: [solved] Detach a window from suckless' tabbed

**grummel**

Ok, let's see whether reparenting is going wild.
Run "xev -root -event substructure" and watch the output while trying to reparent a windo to the root window.
There should be an event (maybe a series of 2 or three different events), but the output shouldn't go haywire…
(in doubt, type random stuff into the shell output to se whether it's static or flies at ludicrous™ speed)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#17 2020-03-21 16:12:27

salonkommunist
Member
From: Germany
Registered: 2020-02-18
Posts: 36

Re: [solved] Detach a window from suckless' tabbed

I did as you asked, please see below the output (I added the "###" row to indicate where the reparenting to root starts).

BTW: Thank you for all your effort and patience thus far!


$ xev -root -event substructure

ConfigureNotify event, serial 18, synthetic NO, window 0x6be,
    event 0x6be, window 0x2200003, (1003,36), width 901, height 1028,
    border_width 3, above 0x1a0000a, override NO

ConfigureNotify event, serial 18, synthetic NO, window 0x6be,
    event 0x6be, window 0x400001, (10,36), width 983, height 1034,
    border_width 0, above 0x1a0000a, override NO

MapNotify event, serial 18, synthetic NO, window 0x6be,
    event 0x6be, window 0x400001, override NO

#############################################

ReparentNotify event, serial 18, synthetic NO, window 0x6be,
    event 0x6be, window 0x1e0000a, parent 0x6be,
    (0,0), override NO

ConfigureNotify event, serial 18, synthetic NO, window 0x6be,
    event 0x6be, window 0x2200003, (1003,36), width 901, height 526,
    border_width 3, above 0x400001, override NO

ConfigureNotify event, serial 18, synthetic NO, window 0x6be,
    event 0x6be, window 0x1e0000a, (1003,578), width 901, height 486,
    border_width 0, above 0xe0026c, override NO

ConfigureNotify event, serial 18, synthetic NO, window 0x6be,
    event 0x6be, window 0x1e0000a, (1003,578), width 901, height 486,
    border_width 3, above 0xe0026c, override NO

MapNotify event, serial 18, synthetic NO, window 0x6be,
    event 0x6be, window 0x1e0000a, override NO

ConfigureNotify event, serial 18, synthetic NO, window 0x6be,
    event 0x6be, window 0x1e0000a, (1003,578), width 901, height 486,
    border_width 3, above 0x2200003, override NO

UnmapNotify event, serial 18, synthetic NO, window 0x6be,
    event 0x6be, window 0x400001, from_configure NO

MapNotify event, serial 18, synthetic NO, window 0x6be,
    event 0x6be, window 0x400001, override NO

Offline

#18 2020-03-22 08:21:13

seth
Member
Registered: 2012-09-03
Posts: 51,029

Re: [solved] Detach a window from suckless' tabbed

That does not look like the window is being passed around (or anything to explain the flicker)
Did you test the regular X11 server w/ a "naked" session (ie. only "startx urxvt" or so, but no WM or any other session processes)?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#19 2020-03-22 20:33:13

salonkommunist
Member
From: Germany
Registered: 2020-02-18
Posts: 36

Re: [solved] Detach a window from suckless' tabbed

As you advised, I have now tested the reparenting in an empty X environment. This time, I observed no flicker and no ignored keystrokes, but I was still unable to detach in such a way that tabbed will close its tab. When I enter text while the still open tab is in focus, the text will appear in the detached window. It is as if the tab were the "hollow twin" of the window proper, if that makes any sense at all.

Offline

#20 2020-03-28 00:03:23

salonkommunist
Member
From: Germany
Registered: 2020-02-18
Posts: 36

Re: [solved] Detach a window from suckless' tabbed

I hate to pry, but I am still stuck on this. Does anyone have some more troubleshooting suggestions?

I have checked my Xorg log file, but as far as I can tell, nothing came up:

[    24.948] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[    24.949] 
X.Org X Server 1.20.7
X Protocol Version 11, Revision 0
[    24.949] Build Operating System: Linux Arch Linux
[    24.949] Current Operating System: Linux PC 5.5.13-arch1-1 #1 SMP PREEMPT Wed, 25 Mar 2020 16:04:40 +0000 x86_64
[    24.949] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vg0-root rw cryptdevice=/dev/sda3:luks:allow-discards loglevel=3 quiet,iommu=pt
[    24.949] Build Date: 14 January 2020  07:13:52AM
[    24.949]  
[    24.949] Current version of pixman: 0.38.4
[    24.949] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    24.949] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    24.950] (==) Log file: "/home/matze/.local/share/xorg/Xorg.0.log", Time: Sat Mar 28 00:48:24 2020
[    24.953] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    24.953] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    24.955] (==) No Layout section.  Using the first Screen section.
[    24.955] (==) No screen section available. Using defaults.
[    24.955] (**) |-->Screen "Default Screen Section" (0)
[    24.955] (**) |   |-->Monitor "<default monitor>"
[    24.955] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    24.955] (==) Automatically adding devices
[    24.955] (==) Automatically enabling devices
[    24.955] (==) Automatically adding GPU devices
[    24.955] (==) Automatically binding GPU devices
[    24.955] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    24.959] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    24.959] 	Entry deleted from font path.
[    24.960] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[    24.960] 	Entry deleted from font path.
[    24.960] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[    24.960] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi
[    24.960] (==) ModulePath set to "/usr/lib/xorg/modules"
[    24.960] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    24.960] (II) Module ABI versions:
[    24.960] 	X.Org ANSI C Emulation: 0.4
[    24.960] 	X.Org Video Driver: 24.1
[    24.960] 	X.Org XInput driver : 24.1
[    24.960] 	X.Org Server Extension : 10.0
[    24.961] (++) using VT number 1

[    24.964] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[    24.965] (II) xfree86: Adding drm device (/dev/dri/card0)
[    24.966] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[    24.971] (--) PCI:*(1@0:0:0) 1002:67df:1682:c580 rev 231, Mem @ 0xc0000000/268435456, 0xd0000000/2097152, 0xfe600000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[    24.971] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    24.971] (II) LoadModule: "glx"
[    24.973] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    24.985] (II) Module glx: vendor="X.Org Foundation"
[    24.985] 	compiled for 1.20.7, module version = 1.0.0
[    24.985] 	ABI class: X.Org Server Extension, version 10.0
[    24.985] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[    24.985] 	loading driver: amdgpu
[    24.985] (==) Matched amdgpu as autoconfigured driver 0
[    24.985] (==) Matched ati as autoconfigured driver 1
[    24.985] (==) Matched modesetting as autoconfigured driver 2
[    24.985] (==) Matched fbdev as autoconfigured driver 3
[    24.985] (==) Matched vesa as autoconfigured driver 4
[    24.985] (==) Assigned the driver to the xf86ConfigLayout
[    24.985] (II) LoadModule: "amdgpu"
[    24.985] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[    24.991] (II) Module amdgpu: vendor="X.Org Foundation"
[    24.991] 	compiled for 1.20.5, module version = 19.1.0
[    24.991] 	Module class: X.Org Video Driver
[    24.991] 	ABI class: X.Org Video Driver, version 24.0
[    24.991] (II) LoadModule: "ati"
[    24.991] (WW) Warning, couldn't open module ati
[    24.991] (EE) Failed to load module "ati" (module does not exist, 0)
[    24.991] (II) LoadModule: "modesetting"
[    24.991] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    24.993] (II) Module modesetting: vendor="X.Org Foundation"
[    24.993] 	compiled for 1.20.7, module version = 1.20.7
[    24.993] 	Module class: X.Org Video Driver
[    24.993] 	ABI class: X.Org Video Driver, version 24.1
[    24.993] (II) LoadModule: "fbdev"
[    24.993] (WW) Warning, couldn't open module fbdev
[    24.993] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    24.993] (II) LoadModule: "vesa"
[    24.993] (WW) Warning, couldn't open module vesa
[    24.993] (EE) Failed to load module "vesa" (module does not exist, 0)
[    24.993] (II) AMDGPU: Driver for AMD Radeon:
	All GPUs supported by the amdgpu kernel driver
[    24.993] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    24.995] (WW) Falling back to old probe method for modesetting
[    24.996] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    24.996] (II) AMDGPU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    24.996] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[    24.996] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    24.996] (==) AMDGPU(0): Default visual is TrueColor
[    24.996] (==) AMDGPU(0): RGB weight 888
[    24.996] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[    24.996] (--) AMDGPU(0): Chipset: "Radeon RX 580 Series" (ChipID = 0x67df)
[    24.996] (II) Loading sub module "fb"
[    24.996] (II) LoadModule: "fb"
[    24.996] (II) Loading /usr/lib/xorg/modules/libfb.so
[    24.998] (II) Module fb: vendor="X.Org Foundation"
[    24.998] 	compiled for 1.20.7, module version = 1.0.0
[    24.998] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    24.998] (II) Loading sub module "dri2"
[    24.998] (II) LoadModule: "dri2"
[    24.998] (II) Module "dri2" already built-in
[    25.402] (II) Loading sub module "glamoregl"
[    25.402] (II) LoadModule: "glamoregl"
[    25.402] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    25.416] (II) Module glamoregl: vendor="X.Org Foundation"
[    25.416] 	compiled for 1.20.7, module version = 1.0.1
[    25.416] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    25.456] (II) AMDGPU(0): glamor X acceleration enabled on Radeon RX 580 Series (POLARIS10, DRM 3.36.0, 5.5.13-arch1-1, LLVM 9.0.1)
[    25.456] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[    25.456] (==) AMDGPU(0): TearFree property default: auto
[    25.456] (==) AMDGPU(0): VariableRefresh: disabled
[    25.456] (II) AMDGPU(0): KMS Pageflipping: enabled
[    25.456] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[    25.457] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[    25.457] (II) AMDGPU(0): Output DisplayPort-2 has no monitor section
[    25.457] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[    25.458] (II) AMDGPU(0): Output DVI-D-0 has no monitor section
[    25.467] (II) AMDGPU(0): EDID for output DisplayPort-0
[    25.467] (II) AMDGPU(0): EDID for output DisplayPort-1
[    25.467] (II) AMDGPU(0): EDID for output DisplayPort-2
[    25.468] (II) AMDGPU(0): EDID for output HDMI-A-0
[    25.468] (II) AMDGPU(0): Manufacturer: PHL  Model: c0d1  Serial#: 13031
[    25.468] (II) AMDGPU(0): Year: 2015  Week: 39
[    25.468] (II) AMDGPU(0): EDID Version: 1.3
[    25.468] (II) AMDGPU(0): Digital Display Input
[    25.468] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 52  vert.: 29
[    25.468] (II) AMDGPU(0): Gamma: 2.20
[    25.468] (II) AMDGPU(0): DPMS capabilities: Off
[    25.468] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    25.468] (II) AMDGPU(0): First detailed timing is preferred mode
[    25.468] (II) AMDGPU(0): redX: 0.641 redY: 0.338   greenX: 0.311 greenY: 0.619
[    25.468] (II) AMDGPU(0): blueX: 0.159 blueY: 0.059   whiteX: 0.313 whiteY: 0.329
[    25.468] (II) AMDGPU(0): Supported established timings:
[    25.468] (II) AMDGPU(0): 720x400@70Hz
[    25.468] (II) AMDGPU(0): 640x480@60Hz
[    25.468] (II) AMDGPU(0): 640x480@67Hz
[    25.468] (II) AMDGPU(0): 640x480@72Hz
[    25.468] (II) AMDGPU(0): 640x480@75Hz
[    25.468] (II) AMDGPU(0): 800x600@60Hz
[    25.468] (II) AMDGPU(0): 800x600@75Hz
[    25.468] (II) AMDGPU(0): 1024x768@60Hz
[    25.468] (II) AMDGPU(0): 1024x768@75Hz
[    25.468] (II) AMDGPU(0): 1280x1024@75Hz
[    25.468] (II) AMDGPU(0): Manufacturer's mask: 0
[    25.468] (II) AMDGPU(0): Supported standard timings:
[    25.468] (II) AMDGPU(0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    25.468] (II) AMDGPU(0): #1: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    25.468] (II) AMDGPU(0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    25.468] (II) AMDGPU(0): #3: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    25.468] (II) AMDGPU(0): #4: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[    25.468] (II) AMDGPU(0): #5: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    25.468] (II) AMDGPU(0): Supported detailed timing:
[    25.468] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  521 x 293 mm
[    25.468] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    25.468] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    25.468] (II) AMDGPU(0): Serial No: ZV01539013031
[    25.468] (II) AMDGPU(0): Monitor name: PHL 243V5
[    25.468] (II) AMDGPU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    25.468] (II) AMDGPU(0): Supported detailed timing:
[    25.468] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  521 x 293 mm
[    25.468] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    25.468] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    25.468] (II) AMDGPU(0): Supported detailed timing:
[    25.468] (II) AMDGPU(0): clock: 27.0 MHz   Image Size:  521 x 293 mm
[    25.468] (II) AMDGPU(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[    25.468] (II) AMDGPU(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[    25.468] (II) AMDGPU(0): Supported detailed timing:
[    25.468] (II) AMDGPU(0): clock: 74.2 MHz   Image Size:  521 x 293 mm
[    25.468] (II) AMDGPU(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[    25.468] (II) AMDGPU(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    25.468] (II) AMDGPU(0): Supported detailed timing:
[    25.468] (II) AMDGPU(0): clock: 27.0 MHz   Image Size:  521 x 293 mm
[    25.468] (II) AMDGPU(0): h_active: 720  h_sync: 732  h_sync_end 796 h_blank_end 864 h_border: 0
[    25.468] (II) AMDGPU(0): v_active: 576  v_sync: 581  v_sync_end 586 v_blanking: 625 v_border: 0
[    25.468] (II) AMDGPU(0): Number of EDID sections to follow: 1
[    25.468] (II) AMDGPU(0): EDID (in hex):
[    25.468] (II) AMDGPU(0): 	00ffffffffffff00410cd1c0e7320000
[    25.468] (II) AMDGPU(0): 	2719010380341d782a2ac5a4564f9e28
[    25.468] (II) AMDGPU(0): 	0f5054bd4b00d1c0b300950081c0950f
[    25.468] (II) AMDGPU(0): 	818001010101023a801871382d40582c
[    25.468] (II) AMDGPU(0): 	450009252100001e000000ff005a5630
[    25.468] (II) AMDGPU(0): 	31353339303133303331000000fc0050
[    25.468] (II) AMDGPU(0): 	484c2032343356350a202020000000fd
[    25.468] (II) AMDGPU(0): 	00384c1e5311000a2020202020200187
[    25.468] (II) AMDGPU(0): 	020322f14f0102030506071011121314
[    25.468] (II) AMDGPU(0): 	15161f04230917078301000065030c00
[    25.468] (II) AMDGPU(0): 	1000023a801871382d40582c45000925
[    25.468] (II) AMDGPU(0): 	2100001e8c0ad08a20e02d10103e9600
[    25.468] (II) AMDGPU(0): 	092521000018011d007251d01e206e28
[    25.468] (II) AMDGPU(0): 	550009252100001e8c0ad09020403120
[    25.468] (II) AMDGPU(0): 	0c405500092521000018000000000000
[    25.468] (II) AMDGPU(0): 	000000000000000000000000000000f9
[    25.468] (II) AMDGPU(0): Printing probed modes for output HDMI-A-0
[    25.468] (II) AMDGPU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    25.468] (II) AMDGPU(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    25.468] (II) AMDGPU(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    25.468] (II) AMDGPU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    25.468] (II) AMDGPU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    25.468] (II) AMDGPU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    25.468] (II) AMDGPU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    25.468] (II) AMDGPU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    25.468] (II) AMDGPU(0): Modeline "1280x800"x60.0  148.50  1280 2008 2052 2200  800 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    25.468] (II) AMDGPU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    25.468] (II) AMDGPU(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    25.468] (II) AMDGPU(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    25.468] (II) AMDGPU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    25.469] (II) AMDGPU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    25.469] (II) AMDGPU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    25.469] (II) AMDGPU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    25.469] (II) AMDGPU(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    25.469] (II) AMDGPU(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    25.469] (II) AMDGPU(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    25.469] (II) AMDGPU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    25.469] (II) AMDGPU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    25.469] (II) AMDGPU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    25.469] (II) AMDGPU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    25.469] (II) AMDGPU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    25.469] (II) AMDGPU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    25.469] (II) AMDGPU(0): EDID for output DVI-D-0
[    25.469] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[    25.469] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[    25.469] (II) AMDGPU(0): Output DisplayPort-2 disconnected
[    25.469] (II) AMDGPU(0): Output HDMI-A-0 connected
[    25.469] (II) AMDGPU(0): Output DVI-D-0 disconnected
[    25.469] (II) AMDGPU(0): Using exact sizes for initial modes
[    25.469] (II) AMDGPU(0): Output HDMI-A-0 using initial mode 1920x1080 +0+0
[    25.469] (II) AMDGPU(0): mem size init: gart size :1ffd3d000 vram size: s:1feed7000 visible:f2e7000
[    25.469] (==) AMDGPU(0): DPI set to (96, 96)
[    25.469] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[    25.469] (II) Loading sub module "ramdac"
[    25.469] (II) LoadModule: "ramdac"
[    25.469] (II) Module "ramdac" already built-in
[    25.469] (II) UnloadModule: "modesetting"
[    25.469] (II) Unloading modesetting
[    25.469] (II) AMDGPU(0): [DRI2] Setup complete
[    25.469] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[    25.469] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[    25.469] (II) AMDGPU(0): Front buffer pitch: 8192 bytes
[    25.472] (II) AMDGPU(0): SYNC extension fences enabled
[    25.472] (II) AMDGPU(0): Present extension enabled
[    25.472] (==) AMDGPU(0): DRI3 enabled
[    25.472] (==) AMDGPU(0): Backing store enabled
[    25.472] (II) AMDGPU(0): Direct rendering enabled
[    25.495] (II) AMDGPU(0): Use GLAMOR acceleration.
[    25.495] (II) AMDGPU(0): Acceleration enabled
[    25.495] (==) AMDGPU(0): DPMS enabled
[    25.495] (==) AMDGPU(0): Silken mouse disabled
[    25.495] (II) AMDGPU(0): Set up textured video (glamor)
[    25.501] (II) Initializing extension Generic Event Extension
[    25.501] (II) Initializing extension SHAPE
[    25.501] (II) Initializing extension MIT-SHM
[    25.501] (II) Initializing extension XInputExtension
[    25.501] (II) Initializing extension XTEST
[    25.501] (II) Initializing extension BIG-REQUESTS
[    25.501] (II) Initializing extension SYNC
[    25.501] (II) Initializing extension XKEYBOARD
[    25.501] (II) Initializing extension XC-MISC
[    25.501] (II) Initializing extension SECURITY
[    25.501] (II) Initializing extension XFIXES
[    25.501] (II) Initializing extension RENDER
[    25.501] (II) Initializing extension RANDR
[    25.501] (II) Initializing extension COMPOSITE
[    25.501] (II) Initializing extension DAMAGE
[    25.501] (II) Initializing extension MIT-SCREEN-SAVER
[    25.501] (II) Initializing extension DOUBLE-BUFFER
[    25.501] (II) Initializing extension RECORD
[    25.501] (II) Initializing extension DPMS
[    25.501] (II) Initializing extension Present
[    25.501] (II) Initializing extension DRI3
[    25.501] (II) Initializing extension X-Resource
[    25.501] (II) Initializing extension XVideo
[    25.501] (II) Initializing extension XVideo-MotionCompensation
[    25.501] (II) Initializing extension GLX
[    25.506] (II) AIGLX: Loaded and initialized radeonsi
[    25.506] (II) GLX: Initialized DRI2 GL provider for screen 0
[    25.506] (II) Initializing extension XFree86-VidModeExtension
[    25.506] (II) Initializing extension XFree86-DGA
[    25.506] (II) Initializing extension XFree86-DRI
[    25.506] (II) Initializing extension DRI2
[    25.509] (II) AMDGPU(0): Setting screen physical size to 508 x 285
[    25.682] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    25.682] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    25.682] (**) Power Button: Applying InputClass "keyboard-all"
[    25.682] (II) LoadModule: "libinput"
[    25.682] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    25.689] (II) Module libinput: vendor="X.Org Foundation"
[    25.689] 	compiled for 1.20.7, module version = 0.29.0
[    25.689] 	Module class: X.Org XInput Driver
[    25.689] 	ABI class: X.Org XInput driver, version 24.1
[    25.689] (II) Using input driver 'libinput' for 'Power Button'
[    25.690] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 19 paused 0
[    25.690] (**) Power Button: always reports core events
[    25.690] (**) Option "Device" "/dev/input/event1"
[    25.690] (**) Option "_source" "server/udev"
[    25.696] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    25.696] (II) event1  - Power Button: device is a keyboard
[    25.697] (II) event1  - Power Button: device removed
[    25.697] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    25.697] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    25.697] (**) Option "xkb_layout" "de"
[    25.727] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    25.727] (II) event1  - Power Button: device is a keyboard
[    25.728] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    25.728] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    25.728] (**) Power Button: Applying InputClass "keyboard-all"
[    25.728] (II) Using input driver 'libinput' for 'Power Button'
[    25.729] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 22 paused 0
[    25.729] (**) Power Button: always reports core events
[    25.729] (**) Option "Device" "/dev/input/event0"
[    25.729] (**) Option "_source" "server/udev"
[    25.730] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    25.730] (II) event0  - Power Button: device is a keyboard
[    25.730] (II) event0  - Power Button: device removed
[    25.730] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    25.730] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    25.730] (**) Option "xkb_layout" "de"
[    25.731] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    25.731] (II) event0  - Power Button: device is a keyboard
[    25.732] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event10)
[    25.732] (II) No input driver specified, ignoring this device.
[    25.732] (II) This device may have been added with another device file.
[    25.733] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event11)
[    25.733] (II) No input driver specified, ignoring this device.
[    25.733] (II) This device may have been added with another device file.
[    25.733] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event12)
[    25.733] (II) No input driver specified, ignoring this device.
[    25.733] (II) This device may have been added with another device file.
[    25.733] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event7)
[    25.733] (II) No input driver specified, ignoring this device.
[    25.733] (II) This device may have been added with another device file.
[    25.734] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event8)
[    25.734] (II) No input driver specified, ignoring this device.
[    25.734] (II) This device may have been added with another device file.
[    25.734] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event9)
[    25.734] (II) No input driver specified, ignoring this device.
[    25.734] (II) This device may have been added with another device file.
[    25.735] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event13)
[    25.735] (II) No input driver specified, ignoring this device.
[    25.735] (II) This device may have been added with another device file.
[    25.735] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event14)
[    25.735] (II) No input driver specified, ignoring this device.
[    25.735] (II) This device may have been added with another device file.
[    25.735] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event15)
[    25.735] (II) No input driver specified, ignoring this device.
[    25.735] (II) This device may have been added with another device file.
[    25.736] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event16)
[    25.736] (II) No input driver specified, ignoring this device.
[    25.736] (II) This device may have been added with another device file.
[    25.736] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event17)
[    25.736] (II) No input driver specified, ignoring this device.
[    25.736] (II) This device may have been added with another device file.
[    25.736] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event18)
[    25.736] (II) No input driver specified, ignoring this device.
[    25.736] (II) This device may have been added with another device file.
[    25.737] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event19)
[    25.737] (II) No input driver specified, ignoring this device.
[    25.737] (II) This device may have been added with another device file.
[    25.737] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event20)
[    25.737] (II) No input driver specified, ignoring this device.
[    25.737] (II) This device may have been added with another device file.
[    25.738] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event2)
[    25.738] (**) USB OPTICAL MOUSE: Applying InputClass "libinput pointer catchall"
[    25.738] (II) Using input driver 'libinput' for 'USB OPTICAL MOUSE'
[    25.794] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 23 paused 0
[    25.794] (**) USB OPTICAL MOUSE: always reports core events
[    25.794] (**) Option "Device" "/dev/input/event2"
[    25.794] (**) Option "_source" "server/udev"
[    25.797] (II) event2  - USB OPTICAL MOUSE: is tagged by udev as: Mouse
[    25.797] (II) event2  - USB OPTICAL MOUSE: device set to 1000 DPI
[    25.797] (II) event2  - USB OPTICAL MOUSE: device is a pointer
[    25.798] (II) event2  - USB OPTICAL MOUSE: device removed
[    25.798] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5:1.0/0003:093A:2521.0001/input/input2/event2"
[    25.798] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE" (type: MOUSE, id 8)
[    25.798] (**) Option "AccelerationScheme" "none"
[    25.798] (**) USB OPTICAL MOUSE: (accel) selected scheme none/0
[    25.798] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[    25.798] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[    25.801] (II) event2  - USB OPTICAL MOUSE: is tagged by udev as: Mouse
[    25.801] (II) event2  - USB OPTICAL MOUSE: device set to 1000 DPI
[    25.801] (II) event2  - USB OPTICAL MOUSE: device is a pointer
[    25.802] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[    25.802] (II) No input driver specified, ignoring this device.
[    25.802] (II) This device may have been added with another device file.
[    25.804] (II) config/udev: Adding input device HID 046a:010d (/dev/input/event3)
[    25.804] (**) HID 046a:010d: Applying InputClass "libinput keyboard catchall"
[    25.804] (**) HID 046a:010d: Applying InputClass "keyboard-all"
[    25.804] (II) Using input driver 'libinput' for 'HID 046a:010d'
[    25.805] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 24 paused 0
[    25.805] (**) HID 046a:010d: always reports core events
[    25.805] (**) Option "Device" "/dev/input/event3"
[    25.805] (**) Option "_source" "server/udev"
[    25.807] (II) event3  - HID 046a:010d: is tagged by udev as: Keyboard
[    25.808] (II) event3  - HID 046a:010d: device is a keyboard
[    25.808] (II) event3  - HID 046a:010d: device removed
[    25.808] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.0/0003:046A:010D.0002/input/input3/event3"
[    25.808] (II) XINPUT: Adding extended input device "HID 046a:010d" (type: KEYBOARD, id 9)
[    25.808] (**) Option "xkb_layout" "de"
[    25.809] (II) event3  - HID 046a:010d: is tagged by udev as: Keyboard
[    25.809] (II) event3  - HID 046a:010d: device is a keyboard
[    25.810] (II) config/udev: Adding input device HID 046a:010d (/dev/input/event4)
[    25.810] (**) HID 046a:010d: Applying InputClass "libinput keyboard catchall"
[    25.810] (**) HID 046a:010d: Applying InputClass "keyboard-all"
[    25.810] (II) Using input driver 'libinput' for 'HID 046a:010d'
[    25.811] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 25 paused 0
[    25.811] (**) HID 046a:010d: always reports core events
[    25.811] (**) Option "Device" "/dev/input/event4"
[    25.811] (**) Option "_source" "server/udev"
[    25.812] (II) event4  - HID 046a:010d: is tagged by udev as: Keyboard
[    25.812] (II) event4  - HID 046a:010d: device is a keyboard
[    25.813] (II) event4  - HID 046a:010d: device removed
[    25.813] (II) libinput: HID 046a:010d: needs a virtual subdevice
[    25.813] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.1/0003:046A:010D.0003/input/input4/event4"
[    25.813] (II) XINPUT: Adding extended input device "HID 046a:010d" (type: MOUSE, id 10)
[    25.813] (**) Option "AccelerationScheme" "none"
[    25.813] (**) HID 046a:010d: (accel) selected scheme none/0
[    25.813] (**) HID 046a:010d: (accel) acceleration factor: 2.000
[    25.813] (**) HID 046a:010d: (accel) acceleration threshold: 4
[    25.814] (II) event4  - HID 046a:010d: is tagged by udev as: Keyboard
[    25.814] (II) event4  - HID 046a:010d: device is a keyboard
[    25.814] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event6)
[    25.814] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    25.814] (**) Eee PC WMI hotkeys: Applying InputClass "keyboard-all"
[    25.814] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[    25.815] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 26 paused 0
[    25.815] (**) Eee PC WMI hotkeys: always reports core events
[    25.815] (**) Option "Device" "/dev/input/event6"
[    25.815] (**) Option "_source" "server/udev"
[    25.816] (II) event6  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[    25.816] (II) event6  - Eee PC WMI hotkeys: device is a keyboard
[    25.816] (II) event6  - Eee PC WMI hotkeys: device removed
[    25.816] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input6/event6"
[    25.816] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[    25.816] (**) Option "xkb_layout" "de"
[    25.817] (II) event6  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[    25.817] (II) event6  - Eee PC WMI hotkeys: device is a keyboard
[    25.817] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    25.817] (II) No input driver specified, ignoring this device.
[    25.817] (II) This device may have been added with another device file.
[    25.820] (**) HID 046a:010d: Applying InputClass "libinput keyboard catchall"
[    25.820] (**) HID 046a:010d: Applying InputClass "keyboard-all"
[    25.820] (II) Using input driver 'libinput' for 'HID 046a:010d'
[    25.820] (II) systemd-logind: returning pre-existing fd for /dev/input/event4 13:68
[    25.820] (**) HID 046a:010d: always reports core events
[    25.820] (**) Option "Device" "/dev/input/event4"
[    25.820] (**) Option "_source" "_driver/libinput"
[    25.820] (II) libinput: HID 046a:010d: is a virtual subdevice
[    25.820] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.1/0003:046A:010D.0003/input/input4/event4"
[    25.820] (II) XINPUT: Adding extended input device "HID 046a:010d" (type: KEYBOARD, id 12)
[    25.820] (**) Option "xkb_layout" "de"
[   422.686] (**) Option "fd" "19"
[   422.686] (II) event1  - Power Button: device removed
[   422.686] (**) Option "fd" "22"
[   422.686] (II) event0  - Power Button: device removed
[   422.686] (**) Option "fd" "23"
[   422.686] (II) event2  - USB OPTICAL MOUSE: device removed
[   422.686] (**) Option "fd" "24"
[   422.686] (II) event3  - HID 046a:010d: device removed
[   422.686] (**) Option "fd" "25"
[   422.686] (**) Option "fd" "26"
[   422.686] (II) event6  - Eee PC WMI hotkeys: device removed
[   422.686] (**) Option "fd" "25"
[   422.686] (II) event4  - HID 046a:010d: device removed
[   422.687] (II) UnloadModule: "libinput"
[   422.687] (II) systemd-logind: not releasing fd for 13:68, still in use
[   422.687] (II) UnloadModule: "libinput"
[   422.687] (II) systemd-logind: releasing fd for 13:70
[   422.687] (II) UnloadModule: "libinput"
[   422.687] (II) systemd-logind: releasing fd for 13:68
[   422.688] (II) UnloadModule: "libinput"
[   422.688] (II) systemd-logind: releasing fd for 13:67
[   422.688] (II) UnloadModule: "libinput"
[   422.688] (II) systemd-logind: releasing fd for 13:66
[   422.688] (II) UnloadModule: "libinput"
[   422.688] (II) systemd-logind: releasing fd for 13:64
[   422.689] (II) UnloadModule: "libinput"
[   422.689] (II) systemd-logind: releasing fd for 13:65
[   422.712] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[   422.712] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[   422.973] (II) Server terminated successfully (0). Closing log file.

Offline

#21 2020-03-29 20:41:07

seth
Member
Registered: 2012-09-03
Posts: 51,029

Re: [solved] Detach a window from suckless' tabbed

This is *really* weird…

Things you could test and look at:
1. remove xf86-video-amdgpu (to use the modesetting driver, this is because the issue isn't w/ xephyr)
2. Check the window structure when the window is supposed to be back on the root: "xwininfo -root -tree"
3. "xwininfo -root; xprop -root" - just to see whether there weird attributes on the particular root window

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#22 2020-04-04 13:42:51

salonkommunist
Member
From: Germany
Registered: 2020-02-18
Posts: 36

Re: [solved] Detach a window from suckless' tabbed

1.) I uninstalled xf86-video-amdgpu. After reboot, the behavior remained unchanged.

2.) Output of "xwininfo -root -tree" (with a detached window):

$ xwininfo -root -tree

xwininfo: Window id: 0x71b (the root window) (has no name)

  Root window id: 0x71b (the root window) (has no name)
  Parent window id: 0x0 (none)
     16 children:
     0x1600073 "Qt Clipboard Requestor Window": ()  3x3+0+0  +0+0
     0x160002f "Qt Client Leader Window": ()  1x1+0+0  +0+0
     0x1600004 "Qt Selection Owner for qutebrowser": ()  3x3+0+0  +0+0
     0x180000a "matze@PC:~": ("urxvt" "URxvt")  901x486+1003+578  +1003+578
        1 child:
        0x180000f (has no name): ()  890x462+2+2  +1008+583
     0xe0000a "matze@PC:~": ("urxvt" "URxvt")  901x526+1003+36  +1003+36
        1 child:
        0xe0000f (has no name): ()  890x504+2+2  +1008+41
     0x400001 (has no name): ("motion_recorder" "Bspwm")  907x492+1003+578  +1003+578
     0x1400003 (has no name): ("tabbed" "tabbed")  977x1028+10+36  +10+36
        1 child:
        0x120000a "matze@PC:~": ("urxvt" "URxvt")  901x1008+0+20  +13+59
           1 child:
           0x120000f (has no name): ()  890x987+2+2  +15+61
     0x160002d "Detach a window from suckless' tabbed / Applications & Desktop Environments / Arch Linux Forums - qutebrowser": ("qutebrowser" "qutebrowser")  1920x1054+0+26  +0+26
     0x600000 (has no name): ()  1x1+-1+-1  +-1+-1
     0xc00003 (has no name): ()  1x1+-1+-1  +-1+-1
     0xc00001 "Dunst": ("Dunst" "Dunst")  1920x1+0+0  +0+0
     0xa00003 "picom": ("picom" "picom")  1x1+0+0  +0+0
     0x400000 "bspwm": ("wm" "Bspwm")  1x1+-1+-1  +-1+-1
     0x600006 "Polybar tray window": ("tray" "Polybar")  1x26+1913+0  +1913+0
     0x600002 "polybar-example_HDMI-1": ("polybar" "Polybar")  1920x26+0+0  +0+0
     0x400003 "HDMI-1": ("root" "Bspwm")  1920x1080+0+0  +0+0

3.) Output of "xwininfo -root; xprop -root" (with a detached window):

$ xwininfo -root; xprop -root

xwininfo: Window id: 0x71b (the root window) (has no name)

  Absolute upper-left X:  0
  Absolute upper-left Y:  0
  Relative upper-left X:  0
  Relative upper-left Y:  0
  Width: 1920
  Height: 1080
  Depth: 24
  Visual: 0x21
  Visual Class: TrueColor
  Border width: 0
  Class: InputOutput
  Colormap: 0x20 (installed)
  Bit Gravity State: ForgetGravity
  Window Gravity State: NorthWestGravity
  Backing Store State: NotUseful
  Save Under State: no
  Map State: IsViewable
  Override Redirect State: no
  Corners:  +0+0  -0+0  -0-0  +0-0
  -geometry 1920x1080+0+0

_NET_CLIENT_LIST_STACKING(WINDOW): window id # 0x160002d, 0xe0000a, 0x1400003, 0x180000a
_NET_ACTIVE_WINDOW(WINDOW): window id # 0x180000a
_NET_CLIENT_LIST(WINDOW): window id # 0x1400003, 0xe0000a, 0x180000a, 0x160002d
ESETROOT_PMAP_ID(PIXMAP): pixmap id # 0x1000001
_XROOTPMAP_ID(PIXMAP): pixmap id # 0x1000001
_NET_CURRENT_DESKTOP(CARDINAL) = 0
_NET_DESKTOP_VIEWPORT(CARDINAL) = 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
_NET_DESKTOP_NAMES(UTF8_STRING) = "I", "II", "III", "IV", "V", "VI", "VII", "VIII", "IX", "X"
_NET_NUMBER_OF_DESKTOPS(CARDINAL) = 10
XFree86_DDC_EDID1_RAWDATA(INTEGER) = 0, -1, -1, -1, -1, -1, -1, 0, 65, 12, -47, -64, -25, 50, 0, 0, 39, 25, 1, 3, -128, 52, 29, 120, 42, 42, -59, -92, 86, 79, -98, 40, 15, 80, 84, -67, 75, 0, -47, -64, -77, 0, -107, 0, -127, -64, -107, 15, -127, -128, 1, 1, 1, 1, 2, 58, -128, 24, 113, 56, 45, 64, 88, 44, 69, 0, 9, 37, 33, 0, 0, 30, 0, 0, 0, -1, 0, 90, 86, 48, 49, 53, 51, 57, 48, 49, 51, 48, 51, 49, 0, 0, 0, -4, 0, 80, 72, 76, 32, 50, 52, 51, 86, 53, 10, 32, 32, 32, 0, 0, 0, -3, 0, 56, 76, 30, 83, 17, 0, 10, 32, 32, 32, 32, 32, 32, 1, -121, 2, 3, 34, -15, 79, 1, 2, 3, 5, 6, 7, 16, 17, 18, 19, 20, 21, 22, 31, 4, 35, 9, 23, 7, -125, 1, 0, 0, 101, 3, 12, 0, 16, 0, 2, 58, -128, 24, 113, 56, 45, 64, 88, 44, 69, 0, 9, 37, 33, 0, 0, 30, -116, 10, -48, -118, 32, -32, 45, 16, 16, 62, -106, 0, 9, 37, 33, 0, 0, 24, 1, 29, 0, 114, 81, -48, 30, 32, 110, 40, 85, 0, 9, 37, 33, 0, 0, 30, -116, 10, -48, -112, 32, 64, 49, 32, 12, 64, 85, 0, 9, 37, 33, 0, 0, 24, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -7
_NET_SUPPORTING_WM_CHECK(WINDOW): window id # 0x400000
_NET_SUPPORTED(ATOM) = _NET_SUPPORTED, _NET_SUPPORTING_WM_CHECK, _NET_DESKTOP_NAMES, _NET_DESKTOP_VIEWPORT, _NET_NUMBER_OF_DESKTOPS, _NET_CURRENT_DESKTOP, _NET_CLIENT_LIST, _NET_ACTIVE_WINDOW, _NET_CLOSE_WINDOW, _NET_WM_STRUT_PARTIAL, _NET_WM_DESKTOP, _NET_WM_STATE, _NET_WM_STATE_HIDDEN, _NET_WM_STATE_FULLSCREEN, _NET_WM_STATE_BELOW, _NET_WM_STATE_ABOVE, _NET_WM_STATE_STICKY, _NET_WM_STATE_DEMANDS_ATTENTION, _NET_WM_WINDOW_TYPE, _NET_WM_WINDOW_TYPE_DOCK, _NET_WM_WINDOW_TYPE_DESKTOP, _NET_WM_WINDOW_TYPE_NOTIFICATION, _NET_WM_WINDOW_TYPE_DIALOG, _NET_WM_WINDOW_TYPE_UTILITY, _NET_WM_WINDOW_TYPE_TOOLBAR
RESOURCE_MANAGER(STRING) = "*.background:\t#060F10\n*.color0:\t#060F10\n*.color1:\t#53865C\n*.color10:\t#EEA13A\n*.color11:\t#0A6CA3\n*.color12:\t#626995\n*.color13:\t#99678B\n*.color14:\t#5290B8\n*.color15:\t#d8c9c9\n*.color2:\t#EEA13A\n*.color3:\t#0A6CA3\n*.color4:\t#626995\n*.color5:\t#99678B\n*.color6:\t#5290B8\n*.color66:\t#060F10\n*.color7:\t#d8c9c9\n*.color8:\t#978c8c\n*.color9:\t#53865C\n*.foreground:\t#d8c9c9\n*background:\t#060F10\n*color0:\t#060F10\n*color1:\t#53865C\n*color10:\t#EEA13A\n*color11:\t#0A6CA3\n*color12:\t#626995\n*color13:\t#99678B\n*color14:\t#5290B8\n*color15:\t#d8c9c9\n*color2:\t#EEA13A\n*color3:\t#0A6CA3\n*color4:\t#626995\n*color5:\t#99678B\n*color6:\t#5290B8\n*color66:\t#060F10\n*color7:\t#d8c9c9\n*color8:\t#978c8c\n*color9:\t#53865C\n*foreground:\t#d8c9c9\nURxvt*background:\t[100]#060F10\nURxvt*borderColor:\t[100]#060F10\nURxvt*cursorColor:\t#d8c9c9\nURxvt*depth:\t32\nURxvt*foreground:\t#d8c9c9\nURxvt*shading:\t8\nURxvt*transparent:\ttrue\nURxvt.font:\txft:Source Code Pro,Source Code Pro Semibold:style=Semibold,Regular:size=14\nURxvt.perl-ext-common:\tresize-font\nURxvt.savelines:\t5000\nURxvt.scrollBar:\tfalse\nUXTerm*background:\t#060F10\nUXTerm*cursorColor:\t#d8c9c9\nUXTerm*foreground:\t#d8c9c9\nXClock*background:\t#060F10\nXClock*foreground:\t#d8c9c9\nXClock*hourColor:\trgba:d8/c9/c9/ff\nXClock*majorColor:\trgba:d8/c9/c9/ff\nXClock*minorColor:\trgba:d8/c9/c9/ff\nXClock*minuteColor:\trgba:d8/c9/c9/ff\nXClock*secondColor:\trgba:d8/c9/c9/ff\nXTerm*background:\t#060F10\nXTerm*cursorColor:\t#d8c9c9\nXTerm*foreground:\t#d8c9c9\nXTerm.vt100.faceName:\tSource Code Pro,Source Code Pro Semibold:style=Semibold,Regular\nXTerm.vt100.faceSize:\t13\nXcursor.theme:\txcursor-adwaita\nemacs*background:\t#060F10\nemacs*foreground:\t#d8c9c9\n"
_XKB_RULES_NAMES(STRING) = "evdev", "pc105", "de", "", ""
XFree86_has_VT(INTEGER) = 1
XFree86_VT(INTEGER) = 7
Xorg_Seat(STRING) = "seat0"

Offline

#23 2020-04-04 14:37:08

seth
Member
Registered: 2012-09-03
Posts: 51,029

Re: [solved] Detach a window from suckless' tabbed

     0x1400003 (has no name): ("tabbed" "tabbed")  977x1028+10+36  +10+36
        1 child:
        0x120000a "matze@PC:~": ("urxvt" "URxvt")  901x1008+0+20  +13+59
           1 child:
           0x120000f (has no name): ()  890x987+2+2  +15+61

Why is the urxvt window narrower than the tabbed window (it's a bit shorter because of the tab bar) and is that also the case before the attempted reparenting?
urxvt has a resize increment != 1x1 (VTEs typically have to keep multiples of one char, check xprop on one) which the WM might try to enforce.
Despite there was an issue w/o WM: did we establish whether the same problem occurs w/ "regular" windows w/ a size increment of 1x1?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#24 2020-04-04 15:03:25

salonkommunist
Member
From: Germany
Registered: 2020-02-18
Posts: 36

Re: [solved] Detach a window from suckless' tabbed

The issue is also with windows other than URxvt.

I just reparented two instances of PCmanFM to tabbed and then detached one of them. Please see below:


Two instances of PCmanFM, before reparenting to tabbed:

$ xwininfo -root -tree

xwininfo: Window id: 0x6be (the root window) (has no name)

  Root window id: 0x6be (the root window) (has no name)
  Parent window id: 0x0 (none)
     23 children:
     0x1400c48 "pcmanfm": ("pcmanfm" "Pcmanfm")  174x38+1921+1081  +1921+1081
        1 child:
        0x1400c49 (has no name): ()  1x1+-1+-1  +1920+1080
     0x14003a5 "pcmanfm": ("pcmanfm" "Pcmanfm")  174x38+1921+1081  +1921+1081
        1 child:
        0x14003a6 (has no name): ()  1x1+-1+-1  +1920+1080
     0x1400132 (has no name): ()  1x1+-1+-1  +-1+-1
     0x1400001 "pcmanfm": ("pcmanfm" "Pcmanfm")  10x10+10+10  +10+10
        1 child:
        0x1400002 (has no name): ()  1x1+-1+-1  +9+9
     0x1600070 "Leafpad": ()  10x10+-100+-100  +-100+-100
     0x1600036 (has no name): ()  1x1+-1+-1  +-1+-1
     0x1600001 "Leafpad": ("leafpad" "Leafpad")  10x10+10+10  +10+10
        1 child:
        0x1600002 (has no name): ()  1x1+-1+-1  +9+9
     0xc00001 "Dunst": ("Dunst" "Dunst")  300x35+1590+20  +1590+20
     0xe0002f "Qt Client Leader Window": ()  1x1+0+0  +0+0
     0x120000a "matze@PC:~": ("urxvt" "URxvt")  977x1028+10+36  +10+36
        1 child:
        0x120000f (has no name): ()  970x1008+2+2  +15+41
     0x1600003 "*(Untitled)": ("leafpad" "Leafpad")  901x1028+1003+36  +1003+36
        1 child:
        0x1600004 (has no name): ()  1x1+-1+-1  +1005+38
     0x400001 (has no name): ("motion_recorder" "Bspwm")  983x1034+10+36  +10+36
     0x1400003 "matze": ("pcmanfm" "Pcmanfm")  977x1028+10+36  +10+36
        1 child:
        0x1400004 (has no name): ()  1x1+-1+-1  +12+38
     0x1400710 "matze": ("pcmanfm" "Pcmanfm")  901x1028+1003+36  +1003+36
        1 child:
        0x1400711 (has no name): ()  1x1+-1+-1  +1005+38
     0xe0002d "Detach a window from suckless' tabbed / Applications & Desktop Environments / Arch Linux Forums - qutebrowser": ("qutebrowser" "qutebrowser")  1920x1054+0+26  +0+26
     0xe00004 "Qt Selection Owner for qutebrowser": ()  3x3+0+0  +0+0
     0x600000 (has no name): ()  1x1+-1+-1  +-1+-1
     0xc00003 (has no name): ()  1x1+-1+-1  +-1+-1
     0xa00003 "picom": ("picom" "picom")  1x1+0+0  +0+0
     0x400000 "bspwm": ("wm" "Bspwm")  1x1+-1+-1  +-1+-1
     0x600006 "Polybar tray window": ("tray" "Polybar")  1x26+1913+0  +1913+0
     0x600002 "polybar-example_HDMI-A-0": ("polybar" "Polybar")  1920x26+0+0  +0+0
     0x400003 "HDMI-A-0": ("root" "Bspwm")  1920x1080+0+0  +0+0

With both instances of PCmanFM reparented to tabbed:

$ xwininfo -root -tree

xwininfo: Window id: 0x6be (the root window) (has no name)

  Root window id: 0x6be (the root window) (has no name)
  Parent window id: 0x0 (none)
     22 children:
     0x1400c48 "pcmanfm": ("pcmanfm" "Pcmanfm")  174x38+1921+1081  +1921+1081
        1 child:
        0x1400c49 (has no name): ()  1x1+-1+-1  +1920+1080
     0x14003a5 "pcmanfm": ("pcmanfm" "Pcmanfm")  174x38+1921+1081  +1921+1081
        1 child:
        0x14003a6 (has no name): ()  1x1+-1+-1  +1920+1080
     0x1400132 (has no name): ()  1x1+-1+-1  +-1+-1
     0x1400001 "pcmanfm": ("pcmanfm" "Pcmanfm")  10x10+10+10  +10+10
        1 child:
        0x1400002 (has no name): ()  1x1+-1+-1  +9+9
     0x1600070 "Leafpad": ()  10x10+-100+-100  +-100+-100
     0x1600036 (has no name): ()  1x1+-1+-1  +-1+-1
     0x1600001 "Leafpad": ("leafpad" "Leafpad")  10x10+10+10  +10+10
        1 child:
        0x1600002 (has no name): ()  1x1+-1+-1  +9+9
     0xc00001 "Dunst": ("Dunst" "Dunst")  300x35+1590+20  +1590+20
     0xe0002f "Qt Client Leader Window": ()  1x1+0+0  +0+0
     0x400001 (has no name): ("motion_recorder" "Bspwm")  907x1034+1003+36  +1003+36
     0x120000a "matze@PC:~": ("urxvt" "URxvt")  977x1028+10+36  +10+36
        1 child:
        0x120000f (has no name): ()  970x1008+2+2  +15+41
     0x1a00003 (has no name): ("tabbed" "tabbed")  1920x1054+0+26  +0+26
        2 children:
        0x1400003 "matze": ("pcmanfm" "Pcmanfm")  1920x1034+0+20  +0+46
           1 child:
           0x1400004 (has no name): ()  1x1+-1+-1  +-1+45
        0x1400710 "matze": ("pcmanfm" "Pcmanfm")  901x506+0+20  +0+46
           1 child:
           0x1400711 (has no name): ()  1x1+-1+-1  +-1+45
     0x1600003 "*(Untitled)": ("leafpad" "Leafpad")  901x1028+1003+36  +1003+36
        1 child:
        0x1600004 (has no name): ()  1x1+-1+-1  +1005+38
     0xe0002d "Detach a window from suckless' tabbed / Applications & Desktop Environments / Arch Linux Forums - qutebrowser": ("qutebrowser" "qutebrowser")  1920x1054+0+26  +0+26
     0xe00004 "Qt Selection Owner for qutebrowser": ()  3x3+0+0  +0+0
     0x600000 (has no name): ()  1x1+-1+-1  +-1+-1
     0xc00003 (has no name): ()  1x1+-1+-1  +-1+-1
     0xa00003 "picom": ("picom" "picom")  1x1+0+0  +0+0
     0x400000 "bspwm": ("wm" "Bspwm")  1x1+-1+-1  +-1+-1
     0x600006 "Polybar tray window": ("tray" "Polybar")  1x26+1913+0  +1913+0
     0x600002 "polybar-example_HDMI-A-0": ("polybar" "Polybar")  1920x26+0+0  +0+0
     0x400003 "HDMI-A-0": ("root" "Bspwm")  1920x1080+0+0  +0+0

And finally, on instance of PCmanFM detached:

$ xwininfo -root -tree

xwininfo: Window id: 0x6be (the root window) (has no name)

  Root window id: 0x6be (the root window) (has no name)
  Parent window id: 0x0 (none)
     23 children:
     0x14003a5 "pcmanfm": ("pcmanfm" "Pcmanfm")  174x38+1921+1081  +1921+1081
        1 child:
        0x14003a6 (has no name): ()  1x1+-1+-1  +1920+1080
     0x1400c48 "pcmanfm": ("pcmanfm" "Pcmanfm")  174x38+1921+1081  +1921+1081
        1 child:
        0x1400c49 (has no name): ()  1x1+-1+-1  +1920+1080
     0x1400132 (has no name): ()  1x1+-1+-1  +-1+-1
     0x1400001 "pcmanfm": ("pcmanfm" "Pcmanfm")  10x10+10+10  +10+10
        1 child:
        0x1400002 (has no name): ()  1x1+-1+-1  +9+9
     0x1600070 "Leafpad": ()  10x10+-100+-100  +-100+-100
     0x1600036 (has no name): ()  1x1+-1+-1  +-1+-1
     0x1600001 "Leafpad": ("leafpad" "Leafpad")  10x10+10+10  +10+10
        1 child:
        0x1600002 (has no name): ()  1x1+-1+-1  +9+9
     0xc00001 "Dunst": ("Dunst" "Dunst")  300x35+1590+20  +1590+20
     0xe0002f "Qt Client Leader Window": ()  1x1+0+0  +0+0
     0x120000a "matze@PC:~": ("urxvt" "URxvt")  977x1028+10+36  +10+36
        1 child:
        0x120000f (has no name): ()  970x1008+2+2  +15+41
     0x1a00003 (has no name): ("tabbed" "tabbed")  977x1028+10+36  +10+36
        1 child:
        0x1400710 "matze": ("pcmanfm" "Pcmanfm")  977x1008+0+20  +13+59
           1 child:
           0x1400711 (has no name): ()  1x1+-1+-1  +12+58
     0x1400003 "matze": ("pcmanfm" "Pcmanfm")  901x1028+1003+36  +1003+36
        1 child:
        0x1400004 (has no name): ()  1x1+-1+-1  +1005+38
     0x400001 (has no name): ("motion_recorder" "Bspwm")  983x1034+10+36  +10+36
     0x1600003 "*(Untitled)": ("leafpad" "Leafpad")  901x1028+1003+36  +1003+36
        1 child:
        0x1600004 (has no name): ()  1x1+-1+-1  +1005+38
     0xe0002d "Detach a window from suckless' tabbed / Applications & Desktop Environments / Arch Linux Forums - qutebrowser": ("qutebrowser" "qutebrowser")  1920x1054+0+26  +0+26
     0xe00004 "Qt Selection Owner for qutebrowser": ()  3x3+0+0  +0+0
     0x600000 (has no name): ()  1x1+-1+-1  +-1+-1
     0xc00003 (has no name): ()  1x1+-1+-1  +-1+-1
     0xa00003 "picom": ("picom" "picom")  1x1+0+0  +0+0
     0x400000 "bspwm": ("wm" "Bspwm")  1x1+-1+-1  +-1+-1
     0x600006 "Polybar tray window": ("tray" "Polybar")  1x26+1913+0  +1913+0
     0x600002 "polybar-example_HDMI-A-0": ("polybar" "Polybar")  1920x26+0+0  +0+0
     0x400003 "HDMI-A-0": ("root" "Bspwm")  1920x1080+0+0  +0+0

Offline

#25 2020-04-04 15:34:13

seth
Member
Registered: 2012-09-03
Posts: 51,029

Re: [solved] Detach a window from suckless' tabbed

     0x1a00003 (has no name): ("tabbed" "tabbed")  1920x1054+0+26  +0+26
        2 children:
        0x1400003 "matze": ("pcmanfm" "Pcmanfm")  1920x1034+0+20  +0+46
           1 child:
           0x1400004 (has no name): ()  1x1+-1+-1  +-1+45
        0x1400710 "matze": ("pcmanfm" "Pcmanfm")  901x506+0+20  +0+46
           1 child:
           0x1400711 (has no name): ()  1x1+-1+-1  +-1+45
     0x1a00003 (has no name): ("tabbed" "tabbed")  977x1028+10+36  +10+36
        1 child:
        0x1400710 "matze": ("pcmanfm" "Pcmanfm")  977x1008+0+20  +13+59
           1 child:
           0x1400711 (has no name): ()  1x1+-1+-1  +12+58
     0x1400003 "matze": ("pcmanfm" "Pcmanfm")  901x1028+1003+36  +1003+36
        1 child:
        0x1400004 (has no name): ()  1x1+-1+-1  +1005+38

The pcmanfm window got untabbed, interestingly it's now narrower than the tabbed window and the new width fits the previous situation on urxvt (I assume 901px is determined by bspwm's grid? Many windows have this width)
So it *seems* as if the window gets moved to root, resized, then for some reason™ jumps back to tabbed (possibly not resized)

Sorry if you elaborated on that before, but how *exactly* do you attach windows to tabbed?
Does this also happen if you run "urxvt -embed 0x_wid_of_tabbed"?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1 2

Board footer

Powered by FluxBB