You are not logged in.
Hello everyone!
I do not know how to fix my problem with the new headset-microphone. A few days ago I bought this set:
https://www.savio.net.pl/en/product/gam … io-strike/ it has 2 jack 3.5mm pins.
It works fine on my PC with Windows8. I also tested it with Ubuntu Live CD on PC - everything was fine. It also works on my Thinkpad T480 (Win10) connected by 2-1 3.5mm jack adapter.
On daily basis I use HP ProBook 640 G1 with docking station as below:
https://www.ebay.com/itm/HP-640-G1-645- … 2235596667
When I connect the microphone and headset to dock station only headset works fine (I can listen to the music etc.). But microphone does not grab sound properly, only annoing noise.
When I run sound recording only headset output is recorded, not my speech. This strange 'loopback' is present even if loopback option is disabled in alsamixer.
To make things clearer: when I volume up my spotify client, microphone indicates louder input (visible in pavucontrol)
I tried different solutions but none of them worked.
In pavucontrol I have Analog Stereo Duplex option enabled, nothing is muted.
Pavucontrol also indicates plugging / unplugging my device correctly.
Internal microphone and speakers works fine.
I provide you some logs:
amixer -c0
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',2
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',3
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',4
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]pacmd list-cards
2 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_03.0>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel HDMI"
alsa.long_card_name = "HDA Intel HDMI at 0xd0730000 irq 35"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0c0c"
device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5700, available: no)
output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 600, available: no)
output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 600, available: no)
off: Off (priority 0, available: unknown)
active profile: <off>
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
index: 1
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 7
properties:
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0734000 irq 32"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "8c20"
device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
device.form_factor = "internal"
device.string = "1"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Built-in Audio Analog Stereo
sources:
alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Built-in Audio Analog Stereo
ports:
analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: yes)
properties:
analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: yes)
properties:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"sudo fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: rungo 2361 F.... pulseaudio
/dev/snd/controlC1: rungo 2361 F.... pulseaudio
/dev/snd/pcmC1D0c: rungo 2361 F...m pulseaudio
/dev/snd/pcmC1D0p: rungo 2361 F...m pulseaudiopacmd list-sources
2 source(s) available.
index: 0
name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause: (none)
priority: 1030
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: yes
current latency: 0.00 ms
max rewind: 1 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 3
linked by: 3
configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
monitor_of: 0
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 7
properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0734000 irq 32"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "8c20"
device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
device.form_factor = "internal"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
* index: 1
name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause: (none)
priority: 9039
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 6554 / 10% / -60.00 dB
volume steps: 65537
muted: no
current latency: 0.85 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 2
linked by: 2
configured latency: 30.00 ms; range is 0.50 .. 2000.00 ms
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "92HD91BXX Analog"
alsa.id = "92HD91BXX Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0734000 irq 32"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "8c20"
device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "IDT 92HD91BXX"
alsa.components = "HDA:111d76e0,103c2105,00100303"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: yes)
properties:
active port: <analog-input-linein>pacmd list-source-outputs
5 source output(s) available.
index: 4
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 0 <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
muted: no
current latency: 3.33 ms
requested latency: 40.00 ms
sample spec: float32le 1ch 25Hz
channel map: mono
Mono
resample method: peaks
owner module: 13
client: 1864 <PulseAudio Volume Control>
properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "33"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "4.0"
application.process.id = "22769"
application.process.user = "rungo"
application.process.host = "HPArch"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "679564a39b344d02a73e0ae7aa6e625a"
application.process.session_id = "1"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 5
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 1 <alsa_input.pci-0000_00_1b.0.analog-stereo>
volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
muted: no
current latency: 0.00 ms
requested latency: 40.00 ms
sample spec: float32le 1ch 25Hz
channel map: mono
Mono
resample method: peaks
owner module: 13
client: 1864 <PulseAudio Volume Control>
properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "33"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "4.0"
application.process.id = "22769"
application.process.user = "rungo"
application.process.host = "HPArch"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "679564a39b344d02a73e0ae7aa6e625a"
application.process.session_id = "1"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 6
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 0 <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
muted: no
current latency: 3.33 ms
requested latency: 40.00 ms
sample spec: float32le 1ch 25Hz
channel map: mono
Mono
resample method: peaks
owner module: 13
client: 1864 <PulseAudio Volume Control>
direct on input: 22
properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "33"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "4.0"
application.process.id = "22769"
application.process.user = "rungo"
application.process.host = "HPArch"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "679564a39b344d02a73e0ae7aa6e625a"
application.process.session_id = "1"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 14
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 0 <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
muted: no
current latency: 3.33 ms
requested latency: 40.00 ms
sample spec: float32le 1ch 25Hz
channel map: mono
Mono
resample method: peaks
owner module: 13
client: 1864 <PulseAudio Volume Control>
direct on input: 29
properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "33"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "4.0"
application.process.id = "22769"
application.process.user = "rungo"
application.process.host = "HPArch"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "679564a39b344d02a73e0ae7aa6e625a"
application.process.session_id = "1"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 15
driver: <protocol-native.c>
flags:
state: RUNNING
source: 1 <alsa_input.pci-0000_00_1b.0.analog-stereo>
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
muted: no
current latency: 0.00 ms
requested latency: 30.00 ms
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
resample method: (null)
owner module: 13
client: 529 <WEBRTC VoiceEngine>
properties:
media.name = "recStream"
application.name = "WEBRTC VoiceEngine"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "33"
application.process.id = "8744"
application.process.user = "rungo"
application.process.host = "HPArch"
application.process.binary = "Discord"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "679564a39b344d02a73e0ae7aa6e625a"
application.process.session_id = "1"
module-stream-restore.id = "source-output-by-application-name:WEBRTC VoiceEngine"aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 10: HDMI 4 [HDMI 4]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: 92HD91BXX Analog [92HD91BXX Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0lsmod | grep snd
snd_hda_codec_hdmi 73728 1
snd_hda_codec_idt 65536 1
snd_hda_codec_generic 94208 1 snd_hda_codec_idt
ledtrig_audio 16384 1 snd_hda_codec_generic
snd_hda_intel 57344 7
snd_intel_dspcfg 28672 1 snd_hda_intel
snd_hda_codec 163840 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_idt
snd_hda_core 106496 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_idt
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 143360 6 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_hda_core
snd_timer 40960 1 snd_pcm
snd 114688 20 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_timer,snd_pcm,snd_hda_codec_idt
soundcore 16384 1 sndlspci | grep -i Audio
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)arecord -l
**** List of CAPTURE Hardware Devices ****
card 1: PCH [HDA Intel PCH], device 0: 92HD91BXX Analog [92HD91BXX Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0dmesg | grep -iE 'snd|hda|intel'
[ 0.000000] Intel GenuineIntel
[ 0.061382] Reserving Intel graphics memory at [mem 0xbd200000-0xbf1fffff]
[ 0.353259] smpboot: CPU0: Intel(R) Core(TM) i5-4300M CPU @ 2.60GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.372743] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 2.243910] intel_idle: MWAIT substates: 0x42120
[ 2.243911] intel_idle: v0.4.1 model 0x3C
[ 2.244095] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.362804] intel_pstate: Intel P-state driver initializing
[ 5.758833] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 5.758835] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 5.904324] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 6.218427] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[ 6.218430] snd_hda_codec_idt hdaudioC1D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[ 6.218432] snd_hda_codec_idt hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 6.218433] snd_hda_codec_idt hdaudioC1D0: mono: mono_out=0x0
[ 6.218434] snd_hda_codec_idt hdaudioC1D0: inputs:
[ 6.218436] snd_hda_codec_idt hdaudioC1D0: Mic=0xc
[ 6.218438] snd_hda_codec_idt hdaudioC1D0: Internal Mic=0x11
[ 6.218439] snd_hda_codec_idt hdaudioC1D0: Line=0xf
[ 6.265126] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input25
[ 6.265191] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input26
[ 6.265243] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input27
[ 6.265295] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input28
[ 6.265347] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input29
[ 6.392671] fb0: switching to inteldrmfb from VESA VGA
[ 6.404523] Intel(R) Wireless WiFi driver for Linux
[ 6.404524] Copyright(c) 2003- 2015 Intel Corporation
[ 6.773574] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[ 6.868808] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 7.002797] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input33
[ 7.003020] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input34
[ 7.003211] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input35
[ 7.003411] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input36
[ 7.003614] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input37
[ 7.215666] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 7.652808] intel-spi intel-spi: w25q128 (16384 Kbytes)
[ 7.689798] Creating 1 MTD partitions on "intel-spi":
[ 8.530748] intel_rapl_common: Found RAPL domain package
[ 8.530750] intel_rapl_common: Found RAPL domain core
[ 8.530751] intel_rapl_common: Found RAPL domain uncore
[ 8.530753] intel_rapl_common: Found RAPL domain dramThank You in advance!
Offline