You are not logged in.

Pages: 1

#1 2020-04-24 23:17:15

tomekk228
Member
Registered: 2020-04-24
Posts: 16

[SOLVED]Pulseaudio no Soundcards except HDMI

Hello,

first: Sorry for my bad English. Im nativ German.

Since today, i have no Sound anymore over internal Audio Card. Only HDMI Sound from the AMD Video Card.

I work everytime with the System. Yesterday everything was fine. Nothing changed (except daily pacman -Syu, maybe that the reason).

I tried everything under ttps://wiki.archlinux.org/index.php/PulseAudio/Troubleshooting

But nothing worked.

pacmd list-sources:

pacmd list-sources
2 source(s) available.
    index: 0
	name: <alsa_output.pci-0000_43_00.1.hdmi-stereo-extra3.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 1030
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 1999,82 ms
	monitor_of: 0
	card: 0 <alsa_card.pci-0000_43_00.1>
	module: 6
	properties:
		device.description = "Monitor of Baffin HDMI/DP Audio [Radeon RX 550 640SP / RX 560/560X] Digital Stereo (HDMI 4)"
		device.class = "monitor"
		alsa.card = "0"
		alsa.card_name = "HDA ATI HDMI"
		alsa.long_card_name = "HDA ATI HDMI at 0xbc660000 irq 168"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:43:00.1"
		sysfs.path = "/devices/pci0000:40/0000:40:01.3/0000:43:00.1/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.product.id = "aae0"
		device.product.name = "Baffin HDMI/DP Audio [Radeon RX 550 640SP / RX 560/560X]"
		device.string = "0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
  * index: 1
	name: <alsa_input.usb-046d_C922_Pro_Stream_Webcam_CAEAC23F-02.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9049
	volume: front-left: 48209 /  74% / -8,00 dB,   front-right: 48209 /  74% / -8,00 dB
	        balance 0,00
	base volume: 9619 /  15% / -50,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 32000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
	card: 1 <alsa_card.usb-046d_C922_Pro_Stream_Webcam_CAEAC23F-02>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "C922 Pro Stream Webcam"
		alsa.long_card_name = "C922 Pro Stream Webcam at usb-0000:45:00.3-4.1.3, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:45:00.3-usb-0:4.1.3:1.2"
		sysfs.path = "/devices/pci0000:40/0000:40:07.1/0000:45:00.3/usb7/7-4/7-4.1/7-4.1.3/7-4.1.3:1.2/sound/card2"
		udev.id = "usb-046d_C922_Pro_Stream_Webcam_CAEAC23F-02"
		device.bus = "usb"
		device.vendor.id = "046d"
		device.vendor.name = "Logitech, Inc."
		device.product.id = "085c"
		device.product.name = "C922 Pro Stream Webcam"
		device.serial = "046d_C922_Pro_Stream_Webcam_CAEAC23F"
		device.form_factor = "webcam"
		device.string = "front:2"
		device.buffering.buffer_size = "256000"
		device.buffering.fragment_size = "128000"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "C922 Pro Stream Webcam Analog Stereo"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB046d:085c"
		module-udev-detect.discovered = "1"
		device.icon_name = "camera-web-usb"
	ports:
		analog-input-mic: Mikrofon (priority 8700, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
	active port: <analog-input-mic>

acmd list-sinks

1 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_43_00.1.hdmi-stereo-extra3>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9030
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 1999,82 ms
	card: 0 <alsa_card.pci-0000_43_00.1>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "HDMI 3"
		alsa.id = "HDMI 3"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "9"
		alsa.card = "0"
		alsa.card_name = "HDA ATI HDMI"
		alsa.long_card_name = "HDA ATI HDMI at 0xbc660000 irq 168"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:43:00.1"
		sysfs.path = "/devices/pci0000:40/0000:40:01.3/0000:43:00.1/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.product.id = "aae0"
		device.product.name = "Baffin HDMI/DP Audio [Radeon RX 550 640SP / RX 560/560X]"
		device.string = "hdmi:0,3"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-stereo-extra3"
		device.profile.description = "Digital Stereo (HDMI 4)"
		device.description = "Baffin HDMI/DP Audio [Radeon RX 550 640SP / RX 560/560X] Digital Stereo (HDMI 4)"
		alsa.mixer_name = "ATI R6xx HDMI"
		alsa.components = "HDA:1002aa01,00aa0100,00100700"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "LG Ultra HD"
	active port: <hdmi-output-3>

lspci | grep Audio

08:00.1 Audio device: NVIDIA Corporation GP102 HDMI Audio Controller (rev a1)
0a:00.3 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio Controller
43:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Baffin HDMI/DP Audio [Radeon RX 550 640SP / RX 560/560X]
44:00.1 Audio device: NVIDIA Corporation GP102 HDMI Audio Controller (rev a1)

I need the 0a:00.3 device.

fuser -v /dev/snd/*

                     BEN.        PID ZUGR.  BEFEHL
/dev/snd/controlC0:  x   2068 F.... pulseaudio
/dev/snd/controlC2:  x   2068 F.... pulseaudio

Sry for the formatting. But here are not buttons for Code or so. Only this Textarea.

Last edited by tomekk228 (2020-04-30 15:15:00)

Offline

#2 2020-04-25 10:43:44

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,738

Re: [SOLVED]Pulseaudio no Soundcards except HDMI

There is code formatting, and there are buttons that link you to BBcode instructions on how to use them under every text box. Please wrap all the outputs in [ code ] [ /code ] tags without the spaces.

Post 

journalctl -b --user-unit pulseaudio
aplay -lL
dmesg | grep snd

as well please.

Offline

#3 2020-04-25 11:50:08

tomekk228
Member
Registered: 2020-04-24
Posts: 16

Re: [SOLVED]Pulseaudio no Soundcards except HDMI

Ok. i do it.

journalctl -b --user-unit pulseaudio

-- Logs begin at Sun 2020-02-02 16:59:06 CET, end at Sat 2020-04-25 13:45:03 CE>
-- No entries --

aplay -lL

bash: aplay: command not found.

dmesg | grep snd

[    9.474424] snd_hda_intel 0000:0a:00.3: Skipping the blacklisted device
[    9.474639] snd_hda_intel 0000:43:00.1: enabling device (0000 -> 0002)
[    9.474956] snd_hda_intel 0000:43:00.1: Force to non-snoop mode
[    9.842883] usbcore: registered new interface driver snd-usb-audio
[    9.866863] snd_hda_intel 0000:43:00.1: bound 0000:43:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])

Offline

#4 2020-04-25 12:10:33

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,738

Re: [SOLVED]Pulseaudio no Soundcards except HDMI

hmm that bug again,  likely a kernel regression, does it disappear if you downgrade linux to 5.6.4 ? I assume https://bugzilla.kernel.org/show_bug.cgi?id=206543 to have a relation here, and fix seems to be queued up for https://github.com/torvalds/linux/commi … b1d9379f75 so will probably be fixed in the next (5.6.8...) or so stable release.

Offline

#5 2020-04-25 12:23:23

tomekk228
Member
Registered: 2020-04-24
Posts: 16

Re: [SOLVED]Pulseaudio no Soundcards except HDMI

Ok, so Linux-mainline 5.7rc2-1 dont help?

Now im running Linux archlinux 5.6.6-arch1-1

I try to downgrade.

Offline

#6 2020-04-25 12:32:28

tomekk228
Member
Registered: 2020-04-24
Posts: 16

Re: [SOLVED]Pulseaudio no Soundcards except HDMI

Ok, with 5.6.4 i now have my "Family 17h.." again in pavucontrol.

But still no sound.

Offline

#7 2020-04-25 13:44:00

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,738

Re: [SOLVED]Pulseaudio no Soundcards except HDMI

Well what's 

aplay -lL #Install alsa-utils
amixer -c$indexfromaplay-l$
pacmd list-sinks
pacmd list-sink-inputs

during playback now?

When did it last "work"?

Last edited by V1del (2020-04-25 13:44:53)

Offline

#8 2020-04-25 13:58:14

tomekk228
Member
Registered: 2020-04-24
Posts: 16

Re: [SOLVED]Pulseaudio no Soundcards except HDMI

It worked on Thursday last time.

aplay -lL 

default
    Default Audio Device
sysdefault
    Default Audio Device
null
    Discard all samples (playback) or generate zero samples (capture)
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
usbstream:CARD=Webcam
    C922 Pro Stream Webcam
    USB Stream Output
default:CARD=Generic
    HD-Audio Generic, ALC1220 Analog
    Default Audio Device
sysdefault:CARD=Generic
    HD-Audio Generic, ALC1220 Analog
    Default Audio Device
front:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    Front speakers
surround21:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Digital
    IEC958 (S/PDIF) Digital Audio Output
usbstream:CARD=Generic
    HD-Audio Generic
    USB Stream Output
hdmi:CARD=HDMI,DEV=0
    HDA ATI HDMI, HDMI 0
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
    HDA ATI HDMI, HDMI 1
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
    HDA ATI HDMI, HDMI 2
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=3
    HDA ATI HDMI, HDMI 3
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=4
    HDA ATI HDMI, HDMI 4
    HDMI Audio Output
usbstream:CARD=HDMI
    HDA ATI HDMI
    USB Stream Output
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 1: Generic [HD-Audio Generic], Gerät 0: ALC1220 Analog [ALC1220 Analog]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 1: Generic [HD-Audio Generic], Gerät 1: ALC1220 Digital [ALC1220 Digital]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 2: HDMI [HDA ATI HDMI], Gerät 3: HDMI 0 [HDMI 0]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 2: HDMI [HDA ATI HDMI], Gerät 7: HDMI 1 [HDMI 1]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 2: HDMI [HDA ATI HDMI], Gerät 8: HDMI 2 [HDMI 2]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 2: HDMI [HDA ATI HDMI], Gerät 9: HDMI 3 [HDMI 3]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 2: HDMI [HDA ATI HDMI], Gerät 10: HDMI 4 [HDMI 4]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0

amixer -c$indexfromaplay-l$

Invalid card number.
Usage: amixer <options> [command]

Available options:
  -h,--help       this help
  -c,--card N     select the card
  -D,--device N   select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive   show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
  -R,--raw-volume Use the raw value (default)
  -M,--mapped-volume Use the mapped volume

Available commands:
  scontrols       show all mixer simple controls
  scontents	  show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control

pacmd list-sinks 

4 sink(s) available.
    index: 0
	name: <alsa_output.pci-0000_0a_00.3.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	state: RUNNING
	suspend cause: (none)
	priority: 9039
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: yes
	current latency: 100,80 ms
	max request: 17 KiB
	max rewind: 17 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	fixed latency: 100,14 ms
	card: 0 <alsa_card.pci-0000_0a_00.3>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC1220 Analog"
		alsa.id = "ALC1220 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfc100000 irq 167"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:0a:00.3"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.product.id = "1457"
		device.product.name = "Family 17h (Models 00h-0fh) HD Audio Controller"
		device.string = "front:1"
		device.buffering.buffer_size = "17664"
		device.buffering.fragment_size = "2944"
		device.access_mode = "mmap"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Family 17h (Models 00h-0fh) HD Audio Controller Analog Stereo"
		alsa.mixer_name = "Realtek ALC1220"
		alsa.components = "HDA:10ec1220,1043874f,00100003"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-lineout: Line-Ausgang (priority 9000, latency offset 0 usec, available: yes)
			properties:
				
		analog-output-headphones: Kopfhörer (priority 9900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-lineout>
    index: 1
	name: <alsa_output.pci-0000_43_00.1.hdmi-stereo-extra3>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9030
	volume: front-left: 42604 /  65% / -11,22 dB,   front-right: 42604 /  65% / -11,22 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 1
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 1999,82 ms
	card: 1 <alsa_card.pci-0000_43_00.1>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "HDMI 3"
		alsa.id = "HDMI 3"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "9"
		alsa.card = "2"
		alsa.card_name = "HDA ATI HDMI"
		alsa.long_card_name = "HDA ATI HDMI at 0xbc660000 irq 166"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:43:00.1"
		sysfs.path = "/devices/pci0000:40/0000:40:01.3/0000:43:00.1/sound/card2"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.product.id = "aae0"
		device.product.name = "Baffin HDMI/DP Audio [Radeon RX 550 640SP / RX 560/560X]"
		device.string = "hdmi:2,3"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-stereo-extra3"
		device.profile.description = "Digital Stereo (HDMI 4)"
		device.description = "Baffin HDMI/DP Audio [Radeon RX 550 640SP / RX 560/560X] Digital Stereo (HDMI 4)"
		alsa.mixer_name = "ATI R6xx HDMI"
		alsa.components = "HDA:1002aa01,00aa0100,00100700"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "LG Ultra HD"
	active port: <hdmi-output-3>
    index: 2
	name: <ladspa_sink>
	driver: <module-ladspa-sink.c>
	flags: HW_MUTE_CTRL LATENCY 
	state: RUNNING
	suspend cause: (none)
	priority: 1000
	volume: front-left: 65536 / 100%,   front-right: 65536 / 100%
	        balance 0,00
	base volume: 65536 / 100%
	volume steps: 65537
	muted: no
	current latency: 100,80 ms
	max request: 34 KiB
	max rewind: 34 KiB
	monitor source: 3
	sample spec: float32le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	fixed latency: 100,14 ms
	module: 26
	properties:
		device.master_device = "alsa_output.pci-0000_0a_00.3.analog-stereo"
		device.class = "filter"
		device.ladspa.module = "sc4_1882"
		device.ladspa.label = "sc4"
		device.ladspa.name = "SC4"
		device.ladspa.maker = "Steve Harris <steve@plugin.org.uk>"
		device.ladspa.copyright = "GPL"
		device.ladspa.unique_id = "1882"
		device.description = "LADSPA Plugin SC4 on Family 17h (Models 00h-0fh) HD Audio Controller Analog Stereo"
		device.icon_name = "audio-card"
  * index: 3
	name: <ladspa_normalized>
	driver: <module-ladspa-sink.c>
	flags: HW_MUTE_CTRL LATENCY 
	state: RUNNING
	suspend cause: (none)
	priority: 1000
	volume: front-left: 65536 / 100%,   front-right: 65536 / 100%
	        balance 0,00
	base volume: 65536 / 100%
	volume steps: 65537
	muted: no
	current latency: 100,78 ms
	max request: 34 KiB
	max rewind: 34 KiB
	monitor source: 4
	sample spec: float32le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	fixed latency: 100,14 ms
	module: 27
	properties:
		device.master_device = "ladspa_sink"
		device.class = "filter"
		device.ladspa.module = "fast_lookahead_limiter_1913"
		device.ladspa.label = "fastLookaheadLimiter"
		device.ladspa.name = "Fast Lookahead limiter"
		device.ladspa.maker = "Steve Harris <steve@plugin.org.uk>"
		device.ladspa.copyright = "GPL"
		device.ladspa.unique_id = "1913"
		device.description = "LADSPA Plugin Fast Lookahead limiter on LADSPA Plugin SC4 on Family 17h (Models 00h-0fh) HD Audio Controller Analog Stereo"
		device.icon_name = "audio-card"

pacmd list-sink-inputs

4 sink(s) available.
    index: 0
	name: <alsa_output.pci-0000_0a_00.3.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	state: RUNNING
	suspend cause: (none)
	priority: 9039
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: yes
	current latency: 100,80 ms
	max request: 17 KiB
	max rewind: 17 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	fixed latency: 100,14 ms
	card: 0 <alsa_card.pci-0000_0a_00.3>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC1220 Analog"
		alsa.id = "ALC1220 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfc100000 irq 167"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:0a:00.3"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.product.id = "1457"
		device.product.name = "Family 17h (Models 00h-0fh) HD Audio Controller"
		device.string = "front:1"
		device.buffering.buffer_size = "17664"
		device.buffering.fragment_size = "2944"
		device.access_mode = "mmap"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Family 17h (Models 00h-0fh) HD Audio Controller Analog Stereo"
		alsa.mixer_name = "Realtek ALC1220"
		alsa.components = "HDA:10ec1220,1043874f,00100003"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-lineout: Line-Ausgang (priority 9000, latency offset 0 usec, available: yes)
			properties:
				
		analog-output-headphones: Kopfhörer (priority 9900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-lineout>
    index: 1
	name: <alsa_output.pci-0000_43_00.1.hdmi-stereo-extra3>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9030
	volume: front-left: 42604 /  65% / -11,22 dB,   front-right: 42604 /  65% / -11,22 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 1
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 1999,82 ms
	card: 1 <alsa_card.pci-0000_43_00.1>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "HDMI 3"
		alsa.id = "HDMI 3"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "9"
		alsa.card = "2"
		alsa.card_name = "HDA ATI HDMI"
		alsa.long_card_name = "HDA ATI HDMI at 0xbc660000 irq 166"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:43:00.1"
		sysfs.path = "/devices/pci0000:40/0000:40:01.3/0000:43:00.1/sound/card2"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.product.id = "aae0"
		device.product.name = "Baffin HDMI/DP Audio [Radeon RX 550 640SP / RX 560/560X]"
		device.string = "hdmi:2,3"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-stereo-extra3"
		device.profile.description = "Digital Stereo (HDMI 4)"
		device.description = "Baffin HDMI/DP Audio [Radeon RX 550 640SP / RX 560/560X] Digital Stereo (HDMI 4)"
		alsa.mixer_name = "ATI R6xx HDMI"
		alsa.components = "HDA:1002aa01,00aa0100,00100700"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "LG Ultra HD"
	active port: <hdmi-output-3>
    index: 2
	name: <ladspa_sink>
	driver: <module-ladspa-sink.c>
	flags: HW_MUTE_CTRL LATENCY 
	state: RUNNING
	suspend cause: (none)
	priority: 1000
	volume: front-left: 65536 / 100%,   front-right: 65536 / 100%
	        balance 0,00
	base volume: 65536 / 100%
	volume steps: 65537
	muted: no
	current latency: 100,80 ms
	max request: 34 KiB
	max rewind: 34 KiB
	monitor source: 3
	sample spec: float32le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	fixed latency: 100,14 ms
	module: 26
	properties:
		device.master_device = "alsa_output.pci-0000_0a_00.3.analog-stereo"
		device.class = "filter"
		device.ladspa.module = "sc4_1882"
		device.ladspa.label = "sc4"
		device.ladspa.name = "SC4"
		device.ladspa.maker = "Steve Harris <steve@plugin.org.uk>"
		device.ladspa.copyright = "GPL"
		device.ladspa.unique_id = "1882"
		device.description = "LADSPA Plugin SC4 on Family 17h (Models 00h-0fh) HD Audio Controller Analog Stereo"
		device.icon_name = "audio-card"
  * index: 3
	name: <ladspa_normalized>
	driver: <module-ladspa-sink.c>
	flags: HW_MUTE_CTRL LATENCY 
	state: RUNNING
	suspend cause: (none)
	priority: 1000
	volume: front-left: 65536 / 100%,   front-right: 65536 / 100%
	        balance 0,00
	base volume: 65536 / 100%
	volume steps: 65537
	muted: no
	current latency: 100,78 ms
	max request: 34 KiB
	max rewind: 34 KiB
	monitor source: 4
	sample spec: float32le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	fixed latency: 100,14 ms
	module: 27
	properties:
		device.master_device = "ladspa_sink"
		device.class = "filter"
		device.ladspa.module = "fast_lookahead_limiter_1913"
		device.ladspa.label = "fastLookaheadLimiter"
		device.ladspa.name = "Fast Lookahead limiter"
		device.ladspa.maker = "Steve Harris <steve@plugin.org.uk>"
		device.ladspa.copyright = "GPL"
		device.ladspa.unique_id = "1913"
		device.description = "LADSPA Plugin Fast Lookahead limiter on LADSPA Plugin SC4 on Family 17h (Models 00h-0fh) HD Audio Controller Analog Stereo"
		device.icon_name = "audio-card"
[user@archlinux ~]$ pacmd list-sink-inputs
3 sink input(s) available.
    index: 0
	driver: <module-ladspa-sink.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 0 <alsa_output.pci-0000_0a_00.3.analog-stereo>
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	muted: no
	current latency: 0,00 ms
	requested latency: n/a
	sample spec: float32le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	resample method: copy
	module: 26
	properties:
		media.name = "LADSPA Stream"
		media.role = "filter"
		module-stream-restore.id = "sink-input-by-media-role:filter"
    index: 1
	driver: <module-ladspa-sink.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 2 <ladspa_sink>
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	muted: no
	current latency: 0,00 ms
	requested latency: n/a
	sample spec: float32le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	resample method: (null)
	module: 27
	properties:
		media.name = "LADSPA Stream"
		media.role = "filter"
		module-stream-restore.id = "sink-input-by-media-role:filter"
    index: 3
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 3 <ladspa_normalized>
	volume: front-left: 69053 / 105% / 1,36 dB,   front-right: 69053 / 105% / 1,36 dB
	        balance 0,00
	muted: no
	current latency: 125,08 ms
	requested latency: 100,14 ms
	sample spec: float32le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	resample method: (null)
	module: 13
	client: 6 <Chromium>
	properties:
		application.icon_name = "chromium-browser"
		media.name = "Playback"
		application.name = "Chromium"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "33"
		application.process.id = "14759"
		application.process.user = "user"
		application.process.host = "archlinux"
		application.process.binary = "chromium"
		application.language = "de_DE.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "40821a6aec184f32b55202a9c25e3a88"
		application.process.session_id = "1"
		module-stream-restore.id = "sink-input-by-application-name:Chromium"

Offline

#9 2020-04-25 14:07:21

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,738

Re: [SOLVED]Pulseaudio no Soundcards except HDMI

You'd need to post amixer -c1 in this case.

However 

index: 0
	name: <alsa_output.pci-0000_0a_00.3.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	state: RUNNING
	suspend cause: (none)
	priority: 9039
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: yes

and you posted the wrong last command, unmute your speaker.

Offline

#10 2020-04-25 14:31:21

tomekk228
Member
Registered: 2020-04-24
Posts: 16

Re: [SOLVED]Pulseaudio no Soundcards except HDMI

Thanks. Now it works! It was muted.

So, i wait for a kernel newer as 5.6.6 ? Can i block 5.6.6 from updating?

Offline

#11 2020-04-30 08:24:43

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,738

Re: [SOLVED]Pulseaudio no Soundcards except HDMI

Should be fixed with 5.6.8, please confirm and mark as [SOLVED] by editing your original post in case.

Offline

#12 2020-04-30 15:13:30

tomekk228
Member
Registered: 2020-04-24
Posts: 16

Re: [SOLVED]Pulseaudio no Soundcards except HDMI

Yes. Thanks. It is fixed with 5.6.8.


Problem Solved.

Offline

Pages: 1

Board footer

Powered by FluxBB