You are not logged in.
Im using Realtek USB DWA-171 5g usb wifi adpter . Since there was no driver that came with the kernel that would work im using the driver from https://github.com/brektrou/rtl8821CU.git. It works and i get 5G speed/However i get the below messages in journal logs and demsg. It never stops.Just goes on and on.
Laso, the adapter is not using the 80Mhz band.Its connected to the SSID of 5G.I have also deleted any saved connections for 80mhz.
I wanted to know if this is will have an adverse effect on the performance and needs to be fixed. If possible,thanks for sharing your inputs.
Just one last thing,is it because its trying to connect to the 80mhz band?
May 24 23:19:31 chicu kernel: RTW: mac_id : 0
May 24 23:19:31 chicu kernel: RTW: wireless_mode : 0x44
May 24 23:19:31 chicu kernel: RTW: mimo_type : 0
May 24 23:19:31 chicu kernel: RTW: bw_mode : 80MHz, ra_bw_mode : 80MHz
May 24 23:19:31 chicu kernel: RTW: rate_id : 10
May 24 23:19:31 chicu kernel: RTW: rssi : 42 (%), rssi_level : 3
May 24 23:19:31 chicu kernel: RTW: is_support_sgi : Y, is_vht_enable : Y
May 24 23:19:31 chicu kernel: RTW: disable_ra : N, disable_pt : N
May 24 23:19:31 chicu kernel: RTW: is_noisy : Y
May 24 23:19:31 chicu kernel: RTW: txrx_state : 2
May 24 23:19:31 chicu kernel: RTW: curr_tx_rate : VHTSS1MCS7 (L)
May 24 23:19:31 chicu kernel: RTW: curr_tx_bw : 80MHz
May 24 23:19:31 chicu kernel: RTW: curr_retry_ratio : 0
May 24 23:19:31 chicu kernel: RTW: ra_mask : 0x00000000003ffff0
May 24 23:19:33 chicu kernel: RTW: ============ STA [a8:49:4d:57:29:0c] ===================Last edited by kaushikgn (2020-05-24 19:09:00)
Offline