Arch Linux

tty000

Member

From: zoneinfo/Europe/Rome

Registered: 2020-03-29

Posts: 23

Temperature issue

Hi everyone,
I run Arch on my Macbook Air 6.2 and my temperature is a bit higher in my opinion..
With macOS it's something like 35-37, with Arch is at least 52..
I'm currently using tlp for power management..

This is the output of sensors:

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +55.0°C  (high = +100.0°C, crit = +100.0°C)
Core 0:        +52.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:        +52.0°C  (high = +100.0°C, crit = +100.0°C)

BAT0-acpi-0
Adapter: ACPI interface
in0:            6.78 V
temp ambient:  +25.9°C
curr1:          1.22 A  (avg =  +1.39 A)

applesmc-isa-0300
Adapter: ISA adapter
Exhaust  :   1198 RPM  (min = 1200 RPM, max = 6500 RPM)
TB0T:         +25.5°C
TB1T:         +30.0°C
TB2T:         +30.5°C
TBXT:         +25.5°C
TC0E:        -127.0°C
TC0F:        -127.0°C
TC0P:         +50.8°C
TC1C:         +57.0°C
TC2C:         +57.0°C
TCGC:         +56.0°C
TCHP:         +43.5°C
TCMX:         +58.5°C
TCSA:         +56.0°C
TCXC:         +58.5°C
TH0A:         +68.5°C
TH0B:         +55.2°C
TH0C:        -127.0°C
TH0F:         -11.0°C
TH0R:         -23.5°C
TH0V:        -127.0°C
TH0a:         +68.5°C
TH0b:         +55.2°C
TH0c:        -127.0°C
THSP:         +42.0°C
TM0P:         +46.2°C
TPCD:         +55.0°C
TS2P:         +50.8°C
TW0P:         +42.0°C
Ta0P:         +44.2°C
Th1H:         +36.2°C
Tm0P:         +41.0°C
Ts0P:         +33.0°C
Ts0S:        -127.0°C

BAT0-virtual-0
Adapter: Virtual device
temp1:        +25.9°C
 

tty000

Member

From: zoneinfo/Europe/Rome

Registered: 2020-03-29

Posts: 23

Re: Temperature issue

Little update:
If I run pwmconfig:

/usr/bin/pwmconfig: There are no pwm-capable sensor modules installed