You are not logged in.

#1 2020-07-03 23:21:29

cappuccino
Member
Registered: 2012-12-26
Posts: 114

Inxi

It doesn't show info. for /data:

Partition:
ID-1: / size: 21.53 GiB used: 9.81 GiB (45.5%) fs: ext4 dev: /dev/sda2
ID-2: /boot size: 598.8 MiB used: 49.5 MiB (8.3%) fs: vfat dev: /dev/sda1
ID-3: /home size: 228.92 GiB used: 98.79 GiB (43.2%) fs: ext4 dev: /dev/sda3
ID-4: /var size: 21.53 GiB used: 12.75 GiB (59.2%) fs: ext4 dev: /dev/sdb1

df -h :
/dev/sdb2  666G  576G   57G  92% /data


System: 
Kernel: 5.7.7-arch1-1 x86_64 bits: 64 compiler: gcc v: 10.1.0 Console: tty 1 Distro: Arch Linux
Graphics: 
Device-1: Intel 3rd Gen Core processor Graphics vendor: ASUSTeK N56VZ driver: i915 v: kernel bus ID: 00:02.0
Device-2: NVIDIA GK107M [GeForce GT 650M] driver: N/A bus ID: 01:00.0

Drives:   
Local Storage: total: 954.81 GiB used: 696.40 GiB (72.9%)
ID-1: /dev/sda vendor: Crucial model: CT275MX300SSD1 size: 256.17 GiB
ID-2: /dev/sdb vendor: Hitachi model: HTS727575A9E364 size: 698.64 GiB

What gives?

Offline

#2 2020-07-04 11:00:18

ondoho
Member
Registered: 2013-04-30
Posts: 692
Website

Re: Inxi

Maybe show us some inxi output? Possibly with a verbose or debug switch?

Offline

#3 2020-07-04 11:40:26

WorMzy
Forum Moderator
From: Scotland
Registered: 2010-06-16
Posts: 11,868
Website

Re: Inxi

Please change your topic title to something that describes your problem. https://wiki.archlinux.org/index.php/Co … ow_to_post

Mod note: moving to AUR Issues.


Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD

Making lemonade from lemons since 2015.

Offline

#4 2020-07-04 23:29:02

h2-1
Member
Registered: 2014-08-15
Posts: 12

Re: Inxi

Maybe read the -h or man page? -P [--partitions] shows only Primary partitions, -p  [--partitions-full] shows all partitions. help explains it, man explains it. In this case you don't even have to RTFM, you just have to RTFH. And if you want a separate swap report, -j does that.

Last edited by h2-1 (2020-07-04 23:37:49)


:: Check out inxi github :: inxi forums ::

Offline

Board footer

Powered by FluxBB