Arch Linux

ruddy32

Member

Registered: 2016-02-29

Posts: 27

Automount Usb storage device failed [close]

Hi,

The laptop failed mounting USB devices.
First USB device return this error :

kernel: usb 1-2: USB disconnect, device number 27
kernel: usb 1-2: new high-speed USB device number 28 using xhci_hcd
kernel: usb 1-2: New USB device found, idVendor=2537, idProduct=1081, bcdDevice= 1.00
kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kernel: usb 1-2: Product: USB Flash Disk
kernel: usb 1-2: Manufacturer: General
kernel: usb 1-2: SerialNumber: 0171000000000474
gnome-shell[1093]: Unable to mount volume USB Flash Disk: Gio.IOErrorEnum: volume doesn’t implement mount

Second USB device return

kernel: usb 1-2: USB disconnect, device number 28
kernel: usb 1-2: new high-speed USB device number 29 using xhci_hcd
kernel: usb 1-2: New USB device found, idVendor=1307, idProduct=0190, bcdDevice= 1.00
kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kernel: usb 1-2: Product: USB Mass Storage Device
kernel: usb 1-2: Manufacturer: USBest Technology
kernel: usb 1-2: SerialNumber: 000000000000BA
mtp-probe[563393]: checking bus 1, device 29: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2"
mtp-probe[563393]: bus: 1, device: 29 was not an MTP device
mtp-probe[563407]: checking bus 1, device 29: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2"
mtp-probe[563407]: bus: 1, device: 29 was not an MTP device

It might be something is wrong in udev rules. Any idea ?

Thanks

Last edited by ruddy32 (2020-07-07 14:28:00)

ruddy32

Member

Registered: 2016-02-29

Posts: 27

Re: Automount Usb storage device failed [close]

Removing an old configuration in libmtp udev rules and restarting the laptop solve the problem.

Sorry for disturb !