You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2020-07-18 20:48:23
- Roken
- Member
- From: South Wales, UK
- Registered: 2012-01-16
- Posts: 1,366
Random logout
I have no idea what's causing this, and I can't pin it down to any sequence of events. Sometimes (not regularly by any means), I will suddenly be logged out of my desktop. In the past, I've been able to log back in, but then there are usually some stability issues until I reboot. After a reboot, things are usually good again.
I can be using the computer all day every day for a week, and then suddenly, out of the blue, boom.
It just happened, and so I grabbed the Xorg.0.log.old as follows. You can see the point it logs out, but I can't see anything to suggest why. Where else should I be looking?
[ 7.582]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[ 7.582] Build Operating System: Linux Arch Linux
[ 7.582] Current Operating System: Linux Tex 5.7.9-zen1-1-zen #1 ZEN SMP PREEMPT Thu, 16 Jul 2020 19:34:12 +0000 x86_64
[ 7.582] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=f333c31e-b315-4d8f-aacb-68a03f08512b rw
[ 7.582] Build Date: 05 May 2020 05:08:17AM
[ 7.582]
[ 7.582] Current version of pixman: 0.40.0
[ 7.582] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.582] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.582] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 18 08:25:42 2020
[ 7.586] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 7.586] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 7.588] (==) No Layout section. Using the first Screen section.
[ 7.588] (**) |-->Screen "Screen0" (0)
[ 7.588] (**) | |-->Monitor "<default monitor>"
[ 7.588] (**) | |-->Device "Device0"
[ 7.588] (==) No monitor specified for screen "Screen0".
Using a default monitor configuration.
[ 7.588] (==) Automatically adding devices
[ 7.588] (==) Automatically enabling devices
[ 7.588] (==) Automatically adding GPU devices
[ 7.588] (==) Automatically binding GPU devices
[ 7.588] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 7.589] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 7.589] Entry deleted from font path.
[ 7.594] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 7.594] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7.594] (**) Extension "DPMS" is disabled
[ 7.594] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7.594] (II) Module ABI versions:
[ 7.594] X.Org ANSI C Emulation: 0.4
[ 7.594] X.Org Video Driver: 24.1
[ 7.594] X.Org XInput driver : 24.1
[ 7.594] X.Org Server Extension : 10.0
[ 7.595] (++) using VT number 1
[ 7.595] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 7.595] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 7.712] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 7.713] (--) PCI:*(8@0:0:0) 10de:1b81:3842:6276 rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 7.713] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 7.713] (II) LoadModule: "glx"
[ 7.716] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7.723] (II) Module glx: vendor="X.Org Foundation"
[ 7.723] compiled for 1.20.8, module version = 1.0.0
[ 7.723] ABI class: X.Org Server Extension, version 10.0
[ 7.723] (II) LoadModule: "nvidia"
[ 7.727] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 7.733] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 7.733] compiled for 1.6.99.901, module version = 1.0.0
[ 7.733] Module class: X.Org Video Driver
[ 7.734] (II) NVIDIA dlloader X Driver 450.57 Sun Jul 5 14:40:23 UTC 2020
[ 7.734] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 7.735] (II) Loading sub module "fb"
[ 7.735] (II) LoadModule: "fb"
[ 7.735] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.736] (II) Module fb: vendor="X.Org Foundation"
[ 7.736] compiled for 1.20.8, module version = 1.0.0
[ 7.736] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.736] (II) Loading sub module "wfb"
[ 7.736] (II) LoadModule: "wfb"
[ 7.736] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 7.737] (II) Module wfb: vendor="X.Org Foundation"
[ 7.737] compiled for 1.20.8, module version = 1.0.0
[ 7.737] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.737] (II) Loading sub module "ramdac"
[ 7.737] (II) LoadModule: "ramdac"
[ 7.737] (II) Module "ramdac" already built-in
[ 7.738] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
[ 7.738] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 7.738] (==) NVIDIA(0): RGB weight 888
[ 7.738] (==) NVIDIA(0): Default visual is TrueColor
[ 7.738] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 7.738] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 7.738] (**) NVIDIA(0): Option "TripleBuffer" "on"
[ 7.738] (**) NVIDIA(0): Option "AllowIndirectGLXProtocol" "off"
[ 7.738] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 7.739] (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}"
[ 7.739] (**) NVIDIA(0): Enabling 2D acceleration
[ 7.739] (II) Loading sub module "glxserver_nvidia"
[ 7.739] (II) LoadModule: "glxserver_nvidia"
[ 7.739] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 7.796] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 7.796] compiled for 1.6.99.901, module version = 1.0.0
[ 7.796] Module class: X.Org Server Extension
[ 7.797] (II) NVIDIA GLX Module 450.57 Sun Jul 5 14:43:44 UTC 2020
[ 7.800] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 7.801] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:8:0:0
[ 7.801] (--) NVIDIA(0): DFP-0
[ 7.801] (--) NVIDIA(0): DFP-1 (boot)
[ 7.801] (--) NVIDIA(0): DFP-2
[ 7.801] (--) NVIDIA(0): DFP-3
[ 7.801] (--) NVIDIA(0): DFP-4
[ 7.801] (--) NVIDIA(0): DFP-5
[ 7.801] (--) NVIDIA(0): DFP-6
[ 7.801] (--) NVIDIA(0): DFP-7
[ 7.802] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1070 (GP104-A) at PCI:8:0:0 (GPU-0)
[ 7.802] (--) NVIDIA(0): Memory: 8388608 kBytes
[ 7.802] (--) NVIDIA(0): VideoBIOS: 86.04.50.01.72
[ 7.802] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 7.802] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 7.802] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 7.802] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 7.802] (--) NVIDIA(GPU-0):
[ 7.831] (--) NVIDIA(GPU-0): AOC Q3279WG5B (DFP-1): connected
[ 7.831] (--) NVIDIA(GPU-0): AOC Q3279WG5B (DFP-1): Internal TMDS
[ 7.831] (--) NVIDIA(GPU-0): AOC Q3279WG5B (DFP-1): 600.0 MHz maximum pixel clock
[ 7.831] (--) NVIDIA(GPU-0):
[ 7.831] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 7.831] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 7.831] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[ 7.831] (--) NVIDIA(GPU-0):
[ 7.831] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 7.831] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 7.831] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 7.831] (--) NVIDIA(GPU-0):
[ 7.831] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 7.831] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[ 7.831] (--) NVIDIA(GPU-0): DFP-4: 1440.0 MHz maximum pixel clock
[ 7.831] (--) NVIDIA(GPU-0):
[ 7.831] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 7.831] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[ 7.831] (--) NVIDIA(GPU-0): DFP-5: 165.0 MHz maximum pixel clock
[ 7.831] (--) NVIDIA(GPU-0):
[ 7.831] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 7.831] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 7.831] (--) NVIDIA(GPU-0): DFP-6: 1440.0 MHz maximum pixel clock
[ 7.831] (--) NVIDIA(GPU-0):
[ 7.832] (--) NVIDIA(GPU-0): DFP-7: disconnected
[ 7.832] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[ 7.832] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[ 7.832] (--) NVIDIA(GPU-0):
[ 7.832] (**) NVIDIA(0): Option "Primary" "true"
[ 7.838] (II) NVIDIA(0): Validated MetaModes:
[ 7.838] (II) NVIDIA(0):
[ 7.838] (II) NVIDIA(0): "nvidia-auto-select+0+0{ForceCompositionPipeline=On,ForceFullCompositionPipeline=On}"
[ 7.838] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1440
[ 7.846] (--) NVIDIA(0): DPI set to (89, 85); computed from "UseEdidDpi" X config
[ 7.846] (--) NVIDIA(0): option
[ 7.848] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[ 7.848] (II) NVIDIA: access.
[ 7.866] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0{ForceCompositionPipeline=On,ForceFullCompositionPipeline=On}"
[ 7.932] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 7.932] (==) NVIDIA(0): Backing store enabled
[ 7.932] (==) NVIDIA(0): Silken mouse disabled
[ 7.932] (==) NVIDIA(0): DPMS enabled
[ 7.932] (II) Loading sub module "dri2"
[ 7.932] (II) LoadModule: "dri2"
[ 7.932] (II) Module "dri2" already built-in
[ 7.932] (II) NVIDIA(0): [DRI2] Setup complete
[ 7.932] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 7.933] (II) Initializing extension Generic Event Extension
[ 7.933] (II) Initializing extension SHAPE
[ 7.933] (II) Initializing extension MIT-SHM
[ 7.933] (II) Initializing extension XInputExtension
[ 7.933] (II) Initializing extension XTEST
[ 7.933] (II) Initializing extension BIG-REQUESTS
[ 7.933] (II) Initializing extension SYNC
[ 7.933] (II) Initializing extension XKEYBOARD
[ 7.933] (II) Initializing extension XC-MISC
[ 7.933] (II) Initializing extension SECURITY
[ 7.934] (II) Initializing extension XFIXES
[ 7.934] (II) Initializing extension RENDER
[ 7.934] (II) Initializing extension RANDR
[ 7.934] (II) Initializing extension COMPOSITE
[ 7.934] (II) Initializing extension DAMAGE
[ 7.934] (II) Initializing extension MIT-SCREEN-SAVER
[ 7.934] (II) Initializing extension DOUBLE-BUFFER
[ 7.934] (II) Initializing extension RECORD
[ 7.934] (II) Initializing extension Present
[ 7.934] (II) Initializing extension DRI3
[ 7.934] (II) Initializing extension X-Resource
[ 7.934] (II) Initializing extension XVideo
[ 7.934] (II) Initializing extension XVideo-MotionCompensation
[ 7.934] (II) Initializing extension GLX
[ 7.934] (II) Initializing extension GLX
[ 7.934] (II) Indirect GLX disabled.
[ 7.934] (II) GLX: Another vendor is already registered for screen 0
[ 7.934] (II) Initializing extension XFree86-VidModeExtension
[ 7.934] (II) Initializing extension XFree86-DGA
[ 7.934] (II) Initializing extension XFree86-DRI
[ 7.934] (II) Initializing extension DRI2
[ 7.935] (II) Initializing extension NV-GLX
[ 7.935] (II) Initializing extension NV-CONTROL
[ 7.935] (II) Initializing extension XINERAMA
[ 8.088] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 8.088] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 8.088] (**) Power Button: Applying InputClass "system-keyboard"
[ 8.088] (II) LoadModule: "libinput"
[ 8.088] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 8.092] (II) Module libinput: vendor="X.Org Foundation"
[ 8.092] compiled for 1.20.8, module version = 0.30.0
[ 8.092] Module class: X.Org XInput Driver
[ 8.092] ABI class: X.Org XInput driver, version 24.1
[ 8.092] (II) Using input driver 'libinput' for 'Power Button'
[ 8.092] (**) Power Button: always reports core events
[ 8.092] (**) Option "Device" "/dev/input/event1"
[ 8.092] (**) Option "_source" "server/udev"
[ 8.100] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 8.100] (II) event1 - Power Button: device is a keyboard
[ 8.100] (II) event1 - Power Button: device removed
[ 8.107] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 8.107] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 8.107] (**) Option "xkb_model" "pc105"
[ 8.107] (**) Option "xkb_layout" "gb"
[ 8.107] (**) Option "xkb_variant" ",dvorak"
[ 8.107] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ 8.128] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 8.128] (II) event1 - Power Button: device is a keyboard
[ 8.128] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 8.128] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 8.128] (**) Power Button: Applying InputClass "system-keyboard"
[ 8.128] (II) Using input driver 'libinput' for 'Power Button'
[ 8.128] (**) Power Button: always reports core events
[ 8.128] (**) Option "Device" "/dev/input/event0"
[ 8.128] (**) Option "_source" "server/udev"
[ 8.129] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 8.129] (II) event0 - Power Button: device is a keyboard
[ 8.129] (II) event0 - Power Button: device removed
[ 8.143] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 8.143] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 8.143] (**) Option "xkb_model" "pc105"
[ 8.143] (**) Option "xkb_layout" "gb"
[ 8.143] (**) Option "xkb_variant" ",dvorak"
[ 8.143] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ 8.143] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 8.143] (II) event0 - Power Button: device is a keyboard
[ 8.144] (II) config/udev: Adding input device UVC Camera (046d:0823) (/dev/input/event29)
[ 8.144] (**) UVC Camera (046d:0823): Applying InputClass "libinput keyboard catchall"
[ 8.144] (**) UVC Camera (046d:0823): Applying InputClass "system-keyboard"
[ 8.144] (II) Using input driver 'libinput' for 'UVC Camera (046d:0823)'
[ 8.144] (**) UVC Camera (046d:0823): always reports core events
[ 8.144] (**) Option "Device" "/dev/input/event29"
[ 8.144] (**) Option "_source" "server/udev"
[ 8.145] (II) event29 - UVC Camera (046d:0823): is tagged by udev as: Keyboard
[ 8.145] (II) event29 - UVC Camera (046d:0823): device is a keyboard
[ 8.145] (II) event29 - UVC Camera (046d:0823): device removed
[ 8.171] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-1/1-1:1.2/input/input29/event29"
[ 8.182] (II) XINPUT: Adding extended input device "UVC Camera (046d:0823)" (type: KEYBOARD, id 8)
[ 8.182] (**) Option "xkb_model" "pc105"
[ 8.182] (**) Option "xkb_layout" "gb"
[ 8.182] (**) Option "xkb_variant" ",dvorak"
[ 8.182] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ 8.183] (II) event29 - UVC Camera (046d:0823): is tagged by udev as: Keyboard
[ 8.183] (II) event29 - UVC Camera (046d:0823): device is a keyboard
[ 8.184] (II) config/udev: Adding input device ELECOM TrackBall Mouse HUGE TrackBall (/dev/input/event27)
[ 8.184] (**) ELECOM TrackBall Mouse HUGE TrackBall: Applying InputClass "libinput pointer catchall"
[ 8.184] (**) ELECOM TrackBall Mouse HUGE TrackBall: Applying InputClass "libinput keyboard catchall"
[ 8.184] (**) ELECOM TrackBall Mouse HUGE TrackBall: Applying InputClass "system-keyboard"
[ 8.184] (II) Using input driver 'libinput' for 'ELECOM TrackBall Mouse HUGE TrackBall'
[ 8.184] (**) ELECOM TrackBall Mouse HUGE TrackBall: always reports core events
[ 8.184] (**) Option "Device" "/dev/input/event27"
[ 8.184] (**) Option "_source" "server/udev"
[ 8.185] (II) event27 - ELECOM TrackBall Mouse HUGE TrackBall: is tagged by udev as: Keyboard Mouse Trackball
[ 8.185] (II) event27 - ELECOM TrackBall Mouse HUGE TrackBall: device is a pointer
[ 8.185] (II) event27 - ELECOM TrackBall Mouse HUGE TrackBall: device is a keyboard
[ 8.185] (II) event27 - ELECOM TrackBall Mouse HUGE TrackBall: device removed
[ 8.199] (II) libinput: ELECOM TrackBall Mouse HUGE TrackBall: needs a virtual subdevice
[ 8.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-2/1-2:1.0/0003:056E:010C.0005/input/input27/event27"
[ 8.199] (II) XINPUT: Adding extended input device "ELECOM TrackBall Mouse HUGE TrackBall" (type: MOUSE, id 9)
[ 8.199] (**) Option "AccelerationScheme" "none"
[ 8.199] (**) ELECOM TrackBall Mouse HUGE TrackBall: (accel) selected scheme none/0
[ 8.199] (**) ELECOM TrackBall Mouse HUGE TrackBall: (accel) acceleration factor: 2.000
[ 8.199] (**) ELECOM TrackBall Mouse HUGE TrackBall: (accel) acceleration threshold: 4
[ 8.200] (II) event27 - ELECOM TrackBall Mouse HUGE TrackBall: is tagged by udev as: Keyboard Mouse Trackball
[ 8.200] (II) event27 - ELECOM TrackBall Mouse HUGE TrackBall: device is a pointer
[ 8.200] (II) event27 - ELECOM TrackBall Mouse HUGE TrackBall: device is a keyboard
[ 8.201] (II) config/udev: Adding input device ELECOM TrackBall Mouse HUGE TrackBall (/dev/input/mouse5)
[ 8.201] (**) ELECOM TrackBall Mouse HUGE TrackBall: Applying InputClass "system-keyboard"
[ 8.201] (II) No input driver specified, ignoring this device.
[ 8.201] (II) This device may have been added with another device file.
[ 8.201] (II) config/udev: Adding input device UC-LOIC TABLET 1060 Pen (/dev/input/event7)
[ 8.201] (**) UC-LOIC TABLET 1060 Pen: Applying InputClass "libinput tablet catchall"
[ 8.201] (**) UC-LOIC TABLET 1060 Pen: Applying InputClass "Graphics tablet pen"
[ 8.201] (II) LoadModule: "wacom"
[ 8.201] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 8.202] (II) Module wacom: vendor="X.Org Foundation"
[ 8.202] compiled for 1.20.8, module version = 0.39.0
[ 8.202] Module class: X.Org XInput Driver
[ 8.202] ABI class: X.Org XInput driver, version 24.1
[ 8.202] (II) Build version: 0.39.0
[ 8.202] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire,
Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8,
Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8,
Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660,
CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L,
CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12,
Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800,
PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931,
DTU2231, DTU1631, DTH1152, DTH1152, DTK2451, DTH2452, DTH2452,
Intuos2 4x5, Intuos2 6x8, Intuos2 9x12, Intuos2 12x12, Intuos2 12x18,
Intuos2 6x8 , Volito, PenStation, Volito2 4x5, Volito2 2x3,
PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6, Bamboo1 5x8, Intuos3 4x5,
Intuos3 6x8, Intuos3 9x12, Intuos3 12x12, Intuos3 12x19,
Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9, Intuos4 8x13,
Intuos4 12x19, Intuos4 WL USB Endpoint,
Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M,
Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M,
Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2,
Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer),
Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, Cintiq 27QHDT,
Cintiq 27QHDT, Mobilestudio Pro 13, MobileStudio Pro 16,
MobileStudio Pro 13, MobileStudio Pro 16, Cintiq 13 FHD Pro,
Cintiq 16 UHD Pro, Cintiq Pro 24, Cintiq Pro 32, Cintiq 13 FHD Pro,
Cintiq 16 UHD Pro, Cintiq Pro 24, Cintiq Pro 32, Cintiq Pro 24,
Mobilestudio Pro 13, MobileStudio Pro 16, MobileStudio Pro 13,
MobileStudio Pro 16, MobileStudio Pro 16, MobileStudio Pro 16,
TabletPC 0x90, TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A,
CapPlus 0x9F, TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5,
TabletPC 0xE6, TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF,
TabletPC 0x100, TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116,
TabletPC 0x12C, TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000,
TabletPC 0x5002, usb:172f:0024, usb:172f:0025, usb:172f:0026,
usb:172f:0027, usb:172f:0028, usb:172f:0030, usb:172f:0031,
usb:172f:0032, usb:172f:0033, usb:172f:0034, usb:172f:0035,
usb:172f:0036, usb:172f:0037, usb:172f:0038, usb:172f:0039,
usb:172f:0051, usb:172f:0052, usb:172f:0053, usb:172f:0054,
usb:172f:0055, usb:172f:0056, usb:172f:0057, usb:172f:0058,
usb:172f:0500, usb:172f:0501, usb:172f:0502, usb:172f:0503,
usb:1b96:0001, usb:17ef:6004
[ 8.203] (II) Using input driver 'wacom' for 'UC-LOIC TABLET 1060 Pen'
[ 8.203] (**) UC-LOIC TABLET 1060 Pen: always reports core events
[ 8.203] (**) Option "Device" "/dev/input/event7"
[ 8.255] (II) UC-LOIC TABLET 1060 Pen: type not specified, assuming 'stylus'.
[ 8.255] (II) UC-LOIC TABLET 1060 Pen: other types will be automatically added.
[ 8.255] (--) UC-LOIC TABLET 1060 Pen stylus: using pressure threshold of 851 for button 1
[ 8.255] (**) UC-LOIC TABLET 1060 Pen stylus: panscroll is 0
[ 8.255] (**) UC-LOIC TABLET 1060 Pen stylus: panscroll modified to 2041
[ 8.255] (--) UC-LOIC TABLET 1060 Pen stylus: maxX=40000 maxY=24000 maxZ=2047 resX=157000 resY=157000 tilt=enabled
[ 8.255] (II) UC-LOIC TABLET 1060 Pen stylus: hotplugging dependent devices.
[ 8.255] (EE) UC-LOIC TABLET 1060 Pen stylus: Invalid type 'eraser' for this device.
[ 8.255] (EE) UC-LOIC TABLET 1060 Pen stylus: Invalid type 'cursor' for this device.
[ 8.255] (EE) UC-LOIC TABLET 1060 Pen stylus: Invalid type 'touch' for this device.
[ 8.255] (EE) UC-LOIC TABLET 1060 Pen stylus: Invalid type 'pad' for this device.
[ 8.255] (II) UC-LOIC TABLET 1060 Pen stylus: hotplugging completed.
[ 8.283] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-5/1-5:1.0/0003:5543:0081.0006/input/input7/event7"
[ 8.283] (II) XINPUT: Adding extended input device "UC-LOIC TABLET 1060 Pen stylus" (type: STYLUS, id 10)
[ 8.283] (**) UC-LOIC TABLET 1060 Pen stylus: (accel) keeping acceleration scheme 1
[ 8.283] (**) UC-LOIC TABLET 1060 Pen stylus: (accel) acceleration profile 0
[ 8.283] (**) UC-LOIC TABLET 1060 Pen stylus: (accel) acceleration factor: 2.000
[ 8.283] (**) UC-LOIC TABLET 1060 Pen stylus: (accel) acceleration threshold: 4
[ 8.336] (II) config/udev: Adding input device UC-LOIC TABLET 1060 Pen (/dev/input/mouse2)
[ 8.336] (II) No input driver specified, ignoring this device.
[ 8.336] (II) This device may have been added with another device file.
[ 8.337] (II) config/udev: Adding input device UC-LOIC TABLET 1060 Pad (/dev/input/event8)
[ 8.337] (**) UC-LOIC TABLET 1060 Pad: Applying InputClass "libinput tablet catchall"
[ 8.337] (**) UC-LOIC TABLET 1060 Pad: Applying InputClass "Graphics tablet pen"
[ 8.337] (II) Using input driver 'wacom' for 'UC-LOIC TABLET 1060 Pad'
[ 8.337] (**) UC-LOIC TABLET 1060 Pad: always reports core events
[ 8.337] (**) Option "Device" "/dev/input/event8"
[ 8.337] (EE) UC-LOIC TABLET 1060 Pad: Invalid type 'stylus' for this device.
[ 8.337] (EE) UC-LOIC TABLET 1060 Pad: Invalid type 'eraser' for this device.
[ 8.337] (EE) UC-LOIC TABLET 1060 Pad: Invalid type 'cursor' for this device.
[ 8.337] (EE) UC-LOIC TABLET 1060 Pad: Invalid type 'touch' for this device.
[ 8.337] (II) UC-LOIC TABLET 1060 Pad: type not specified, assuming 'pad'.
[ 8.337] (II) UC-LOIC TABLET 1060 Pad: other types will be automatically added.
[ 8.337] (**) UC-LOIC TABLET 1060 Pad pad: panscroll is 0
[ 8.337] (**) UC-LOIC TABLET 1060 Pad pad: panscroll modified to 13
[ 8.337] (II) UC-LOIC TABLET 1060 Pad pad: hotplugging dependent devices.
[ 8.337] (EE) UC-LOIC TABLET 1060 Pad pad: Invalid type 'stylus' for this device.
[ 8.337] (EE) UC-LOIC TABLET 1060 Pad pad: Invalid type 'eraser' for this device.
[ 8.337] (EE) UC-LOIC TABLET 1060 Pad pad: Invalid type 'cursor' for this device.
[ 8.337] (EE) UC-LOIC TABLET 1060 Pad pad: Invalid type 'touch' for this device.
[ 8.337] (II) UC-LOIC TABLET 1060 Pad pad: hotplugging completed.
[ 8.371] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-5/1-5:1.0/0003:5543:0081.0006/input/input8/event8"
[ 8.371] (II) XINPUT: Adding extended input device "UC-LOIC TABLET 1060 Pad pad" (type: PAD, id 11)
[ 8.371] (**) UC-LOIC TABLET 1060 Pad pad: (accel) keeping acceleration scheme 1
[ 8.371] (**) UC-LOIC TABLET 1060 Pad pad: (accel) acceleration profile 0
[ 8.371] (**) UC-LOIC TABLET 1060 Pad pad: (accel) acceleration factor: 2.000
[ 8.371] (**) UC-LOIC TABLET 1060 Pad pad: (accel) acceleration threshold: 4
[ 8.372] (II) config/udev: Adding input device UC-LOIC TABLET 1060 Pad (/dev/input/js0)
[ 8.372] (II) No input driver specified, ignoring this device.
[ 8.372] (II) This device may have been added with another device file.
[ 8.373] (II) config/udev: Adding input device UC-LOIC TABLET 1060 Pen (/dev/input/event10)
[ 8.373] (**) UC-LOIC TABLET 1060 Pen: Applying InputClass "libinput tablet catchall"
[ 8.373] (**) UC-LOIC TABLET 1060 Pen: Applying InputClass "Graphics tablet pen"
[ 8.373] (II) Using input driver 'wacom' for 'UC-LOIC TABLET 1060 Pen'
[ 8.373] (**) UC-LOIC TABLET 1060 Pen: always reports core events
[ 8.373] (**) Option "Device" "/dev/input/event10"
[ 8.425] (II) UC-LOIC TABLET 1060 Pen: type not specified, assuming 'stylus'.
[ 8.425] (II) UC-LOIC TABLET 1060 Pen: other types will be automatically added.
[ 8.425] (--) UC-LOIC TABLET 1060 Pen stylus: using pressure threshold of 851 for button 1
[ 8.425] (**) UC-LOIC TABLET 1060 Pen stylus: panscroll is 0
[ 8.425] (**) UC-LOIC TABLET 1060 Pen stylus: panscroll modified to 13
[ 8.425] (--) UC-LOIC TABLET 1060 Pen stylus: maxX=2048 maxY=2048 maxZ=2047 resX=1016 resY=1016 tilt=enabled
[ 8.425] (II) UC-LOIC TABLET 1060 Pen stylus: hotplugging dependent devices.
[ 8.425] (EE) UC-LOIC TABLET 1060 Pen stylus: Invalid type 'cursor' for this device.
[ 8.425] (EE) UC-LOIC TABLET 1060 Pen stylus: Invalid type 'touch' for this device.
[ 8.425] (EE) UC-LOIC TABLET 1060 Pen stylus: Invalid type 'pad' for this device.
[ 8.425] (II) UC-LOIC TABLET 1060 Pen stylus: hotplugging completed.
[ 8.459] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-5/1-5:1.1/0003:5543:0081.0007/input/input10/event10"
[ 8.459] (II) XINPUT: Adding extended input device "UC-LOIC TABLET 1060 Pen stylus" (type: STYLUS, id 12)
[ 8.459] (**) UC-LOIC TABLET 1060 Pen stylus: (accel) keeping acceleration scheme 1
[ 8.459] (**) UC-LOIC TABLET 1060 Pen stylus: (accel) acceleration profile 0
[ 8.459] (**) UC-LOIC TABLET 1060 Pen stylus: (accel) acceleration factor: 2.000
[ 8.459] (**) UC-LOIC TABLET 1060 Pen stylus: (accel) acceleration threshold: 4
[ 8.512] (II) config/udev: Adding input device UC-LOIC TABLET 1060 Pen (/dev/input/mouse4)
[ 8.512] (II) No input driver specified, ignoring this device.
[ 8.512] (II) This device may have been added with another device file.
[ 8.513] (II) config/udev: Adding input device UC-LOIC TABLET 1060 Mouse (/dev/input/event9)
[ 8.513] (**) UC-LOIC TABLET 1060 Mouse: Applying InputClass "libinput pointer catchall"
[ 8.513] (**) UC-LOIC TABLET 1060 Mouse: Applying InputClass "libinput tablet catchall"
[ 8.513] (**) UC-LOIC TABLET 1060 Mouse: Applying InputClass "Graphics tablet pen"
[ 8.513] (II) Using input driver 'wacom' for 'UC-LOIC TABLET 1060 Mouse'
[ 8.513] (**) UC-LOIC TABLET 1060 Mouse: always reports core events
[ 8.513] (**) Option "Device" "/dev/input/event9"
[ 8.513] (EE) UC-LOIC TABLET 1060 Mouse: Invalid type 'stylus' for this device.
[ 8.513] (EE) UC-LOIC TABLET 1060 Mouse: Invalid type 'eraser' for this device.
[ 8.513] (EE) UC-LOIC TABLET 1060 Mouse: Invalid type 'cursor' for this device.
[ 8.513] (EE) UC-LOIC TABLET 1060 Mouse: Invalid type 'touch' for this device.
[ 8.513] (EE) UC-LOIC TABLET 1060 Mouse: Invalid type 'pad' for this device.
[ 8.513] (EE) UC-LOIC TABLET 1060 Mouse: No type specified
[ 8.543] (EE) PreInit returned 8 for "UC-LOIC TABLET 1060 Mouse"
[ 8.543] (II) UnloadModule: "wacom"
[ 8.544] (II) config/udev: Adding input device UC-LOIC TABLET 1060 Mouse (/dev/input/mouse3)
[ 8.544] (II) No input driver specified, ignoring this device.
[ 8.544] (II) This device may have been added with another device file.
[ 8.545] (II) config/udev: Adding input device BurrBrown from Texas Instruments USB AUDIO CODEC (/dev/input/event12)
[ 8.545] (**) BurrBrown from Texas Instruments USB AUDIO CODEC: Applying InputClass "libinput keyboard catchall"
[ 8.545] (**) BurrBrown from Texas Instruments USB AUDIO CODEC: Applying InputClass "system-keyboard"
[ 8.545] (II) Using input driver 'libinput' for 'BurrBrown from Texas Instruments USB AUDIO CODEC'
[ 8.545] (**) BurrBrown from Texas Instruments USB AUDIO CODEC: always reports core events
[ 8.545] (**) Option "Device" "/dev/input/event12"
[ 8.545] (**) Option "_source" "server/udev"
[ 8.547] (II) event12 - BurrBrown from Texas Instruments USB AUDIO CODEC: is tagged by udev as: Keyboard
[ 8.547] (II) event12 - BurrBrown from Texas Instruments USB AUDIO CODEC: device is a keyboard
[ 8.547] (II) event12 - BurrBrown from Texas Instruments USB AUDIO CODEC: device removed
[ 8.555] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-6/1-6:1.3/0003:08BB:29C0.0009/input/input12/event12"
[ 8.555] (II) XINPUT: Adding extended input device "BurrBrown from Texas Instruments USB AUDIO CODEC" (type: KEYBOARD, id 13)
[ 8.555] (**) Option "xkb_model" "pc105"
[ 8.555] (**) Option "xkb_layout" "gb"
[ 8.555] (**) Option "xkb_variant" ",dvorak"
[ 8.555] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ 8.557] (II) event12 - BurrBrown from Texas Instruments USB AUDIO CODEC: is tagged by udev as: Keyboard
[ 8.557] (II) event12 - BurrBrown from Texas Instruments USB AUDIO CODEC: device is a keyboard
[ 8.558] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[ 8.558] (II) No input driver specified, ignoring this device.
[ 8.558] (II) This device may have been added with another device file.
[ 8.559] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[ 8.559] (II) No input driver specified, ignoring this device.
[ 8.559] (II) This device may have been added with another device file.
[ 8.559] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[ 8.559] (II) No input driver specified, ignoring this device.
[ 8.559] (II) This device may have been added with another device file.
[ 8.560] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event16)
[ 8.560] (II) No input driver specified, ignoring this device.
[ 8.560] (II) This device may have been added with another device file.
[ 8.560] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event17)
[ 8.560] (II) No input driver specified, ignoring this device.
[ 8.560] (II) This device may have been added with another device file.
[ 8.560] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event18)
[ 8.560] (II) No input driver specified, ignoring this device.
[ 8.560] (II) This device may have been added with another device file.
[ 8.561] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=12 (/dev/input/event19)
[ 8.561] (II) No input driver specified, ignoring this device.
[ 8.561] (II) This device may have been added with another device file.
[ 8.562] (II) config/udev: Adding input device CM Storm Trigger gaming Keyboard (/dev/input/event3)
[ 8.562] (**) CM Storm Trigger gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[ 8.562] (**) CM Storm Trigger gaming Keyboard: Applying InputClass "system-keyboard"
[ 8.562] (II) Using input driver 'libinput' for 'CM Storm Trigger gaming Keyboard'
[ 8.562] (**) CM Storm Trigger gaming Keyboard: always reports core events
[ 8.562] (**) Option "Device" "/dev/input/event3"
[ 8.562] (**) Option "_source" "server/udev"
[ 8.564] (II) event3 - CM Storm Trigger gaming Keyboard: is tagged by udev as: Keyboard
[ 8.564] (II) event3 - CM Storm Trigger gaming Keyboard: device is a keyboard
[ 8.564] (II) event3 - CM Storm Trigger gaming Keyboard: device removed
[ 8.583] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-3/3-3.1/3-3.1:1.0/0003:2516:0002.0002/input/input3/event3"
[ 8.583] (II) XINPUT: Adding extended input device "CM Storm Trigger gaming Keyboard" (type: KEYBOARD, id 14)
[ 8.583] (**) Option "xkb_model" "pc105"
[ 8.583] (**) Option "xkb_layout" "gb"
[ 8.583] (**) Option "xkb_variant" ",dvorak"
[ 8.583] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ 8.585] (II) event3 - CM Storm Trigger gaming Keyboard: is tagged by udev as: Keyboard
[ 8.585] (II) event3 - CM Storm Trigger gaming Keyboard: device is a keyboard
[ 8.586] (II) config/udev: Adding input device CM Storm Trigger gaming Keyboard System Control (/dev/input/event4)
[ 8.586] (**) CM Storm Trigger gaming Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[ 8.586] (**) CM Storm Trigger gaming Keyboard System Control: Applying InputClass "system-keyboard"
[ 8.586] (II) Using input driver 'libinput' for 'CM Storm Trigger gaming Keyboard System Control'
[ 8.586] (**) CM Storm Trigger gaming Keyboard System Control: always reports core events
[ 8.586] (**) Option "Device" "/dev/input/event4"
[ 8.586] (**) Option "_source" "server/udev"
[ 8.588] (II) event4 - CM Storm Trigger gaming Keyboard System Control: is tagged by udev as: Keyboard
[ 8.588] (II) event4 - CM Storm Trigger gaming Keyboard System Control: device is a keyboard
[ 8.588] (II) event4 - CM Storm Trigger gaming Keyboard System Control: device removed
[ 8.603] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-3/3-3.1/3-3.1:1.1/0003:2516:0002.0003/input/input4/event4"
[ 8.603] (II) XINPUT: Adding extended input device "CM Storm Trigger gaming Keyboard System Control" (type: KEYBOARD, id 15)
[ 8.603] (**) Option "xkb_model" "pc105"
[ 8.603] (**) Option "xkb_layout" "gb"
[ 8.603] (**) Option "xkb_variant" ",dvorak"
[ 8.603] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ 8.605] (II) event4 - CM Storm Trigger gaming Keyboard System Control: is tagged by udev as: Keyboard
[ 8.605] (II) event4 - CM Storm Trigger gaming Keyboard System Control: device is a keyboard
[ 8.606] (II) config/udev: Adding input device CM Storm Trigger gaming Keyboard Consumer Control (/dev/input/event5)
[ 8.606] (**) CM Storm Trigger gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 8.606] (**) CM Storm Trigger gaming Keyboard Consumer Control: Applying InputClass "system-keyboard"
[ 8.606] (II) Using input driver 'libinput' for 'CM Storm Trigger gaming Keyboard Consumer Control'
[ 8.606] (**) CM Storm Trigger gaming Keyboard Consumer Control: always reports core events
[ 8.606] (**) Option "Device" "/dev/input/event5"
[ 8.606] (**) Option "_source" "server/udev"
[ 8.608] (II) event5 - CM Storm Trigger gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 8.608] (II) event5 - CM Storm Trigger gaming Keyboard Consumer Control: device is a keyboard
[ 8.609] (II) event5 - CM Storm Trigger gaming Keyboard Consumer Control: device removed
[ 8.623] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-3/3-3.1/3-3.1:1.1/0003:2516:0002.0003/input/input5/event5"
[ 8.623] (II) XINPUT: Adding extended input device "CM Storm Trigger gaming Keyboard Consumer Control" (type: KEYBOARD, id 16)
[ 8.623] (**) Option "xkb_model" "pc105"
[ 8.623] (**) Option "xkb_layout" "gb"
[ 8.623] (**) Option "xkb_variant" ",dvorak"
[ 8.623] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ 8.625] (II) event5 - CM Storm Trigger gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 8.626] (II) event5 - CM Storm Trigger gaming Keyboard Consumer Control: device is a keyboard
[ 8.627] (II) config/udev: Adding input device CM Storm Trigger gaming Keyboard Mouse (/dev/input/event6)
[ 8.627] (**) CM Storm Trigger gaming Keyboard Mouse: Applying InputClass "libinput pointer catchall"
[ 8.627] (II) Using input driver 'libinput' for 'CM Storm Trigger gaming Keyboard Mouse'
[ 8.627] (**) CM Storm Trigger gaming Keyboard Mouse: always reports core events
[ 8.627] (**) Option "Device" "/dev/input/event6"
[ 8.627] (**) Option "_source" "server/udev"
[ 8.629] (II) event6 - CM Storm Trigger gaming Keyboard Mouse: is tagged by udev as: Mouse
[ 8.629] (II) event6 - CM Storm Trigger gaming Keyboard Mouse: device is a pointer
[ 8.629] (II) event6 - CM Storm Trigger gaming Keyboard Mouse: device removed
[ 8.655] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-3/3-3.1/3-3.1:1.1/0003:2516:0002.0003/input/input6/event6"
[ 8.655] (II) XINPUT: Adding extended input device "CM Storm Trigger gaming Keyboard Mouse" (type: MOUSE, id 17)
[ 8.655] (**) Option "AccelerationScheme" "none"
[ 8.655] (**) CM Storm Trigger gaming Keyboard Mouse: (accel) selected scheme none/0
[ 8.655] (**) CM Storm Trigger gaming Keyboard Mouse: (accel) acceleration factor: 2.000
[ 8.655] (**) CM Storm Trigger gaming Keyboard Mouse: (accel) acceleration threshold: 4
[ 8.657] (II) event6 - CM Storm Trigger gaming Keyboard Mouse: is tagged by udev as: Mouse
[ 8.658] (II) event6 - CM Storm Trigger gaming Keyboard Mouse: device is a pointer
[ 8.658] (II) config/udev: Adding input device CM Storm Trigger gaming Keyboard Mouse (/dev/input/mouse1)
[ 8.658] (II) No input driver specified, ignoring this device.
[ 8.659] (II) This device may have been added with another device file.
[ 8.659] (II) config/udev: Adding input device Corsair Corsair M30 Gaming Mouse (/dev/input/event2)
[ 8.659] (**) Corsair Corsair M30 Gaming Mouse: Applying InputClass "libinput pointer catchall"
[ 8.659] (II) Using input driver 'libinput' for 'Corsair Corsair M30 Gaming Mouse'
[ 8.659] (**) Corsair Corsair M30 Gaming Mouse: always reports core events
[ 8.659] (**) Option "Device" "/dev/input/event2"
[ 8.659] (**) Option "_source" "server/udev"
[ 8.713] (II) event2 - Corsair Corsair M30 Gaming Mouse: is tagged by udev as: Mouse
[ 8.714] (II) event2 - Corsair Corsair M30 Gaming Mouse: device is a pointer
[ 8.714] (II) event2 - Corsair Corsair M30 Gaming Mouse: device removed
[ 8.743] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-4/3-4:1.0/0003:1B1C:1B0C.0001/input/input2/event2"
[ 8.743] (II) XINPUT: Adding extended input device "Corsair Corsair M30 Gaming Mouse" (type: MOUSE, id 18)
[ 8.743] (**) Option "AccelerationScheme" "none"
[ 8.743] (**) Corsair Corsair M30 Gaming Mouse: (accel) selected scheme none/0
[ 8.743] (**) Corsair Corsair M30 Gaming Mouse: (accel) acceleration factor: 2.000
[ 8.743] (**) Corsair Corsair M30 Gaming Mouse: (accel) acceleration threshold: 4
[ 8.797] (II) event2 - Corsair Corsair M30 Gaming Mouse: is tagged by udev as: Mouse
[ 8.797] (II) event2 - Corsair Corsair M30 Gaming Mouse: device is a pointer
[ 8.798] (II) config/udev: Adding input device Corsair Corsair M30 Gaming Mouse (/dev/input/mouse0)
[ 8.798] (II) No input driver specified, ignoring this device.
[ 8.798] (II) This device may have been added with another device file.
[ 8.798] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event20)
[ 8.798] (II) No input driver specified, ignoring this device.
[ 8.798] (II) This device may have been added with another device file.
[ 8.799] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event21)
[ 8.799] (II) No input driver specified, ignoring this device.
[ 8.799] (II) This device may have been added with another device file.
[ 8.799] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event22)
[ 8.799] (II) No input driver specified, ignoring this device.
[ 8.799] (II) This device may have been added with another device file.
[ 8.799] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event23)
[ 8.799] (II) No input driver specified, ignoring this device.
[ 8.799] (II) This device may have been added with another device file.
[ 8.800] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event24)
[ 8.800] (II) No input driver specified, ignoring this device.
[ 8.800] (II) This device may have been added with another device file.
[ 8.800] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event25)
[ 8.800] (II) No input driver specified, ignoring this device.
[ 8.800] (II) This device may have been added with another device file.
[ 8.800] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event26)
[ 8.800] (II) No input driver specified, ignoring this device.
[ 8.800] (II) This device may have been added with another device file.
[ 8.801] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event28)
[ 8.801] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 8.801] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[ 8.801] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[ 8.801] (**) Eee PC WMI hotkeys: always reports core events
[ 8.801] (**) Option "Device" "/dev/input/event28"
[ 8.801] (**) Option "_source" "server/udev"
[ 8.802] (II) event28 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 8.802] (II) event28 - Eee PC WMI hotkeys: device is a keyboard
[ 8.802] (II) event28 - Eee PC WMI hotkeys: device removed
[ 8.815] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input28/event28"
[ 8.815] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 19)
[ 8.815] (**) Option "xkb_model" "pc105"
[ 8.815] (**) Option "xkb_layout" "gb"
[ 8.815] (**) Option "xkb_variant" ",dvorak"
[ 8.815] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ 8.816] (II) event28 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 8.816] (II) event28 - Eee PC WMI hotkeys: device is a keyboard
[ 8.817] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[ 8.817] (II) No input driver specified, ignoring this device.
[ 8.817] (II) This device may have been added with another device file.
[ 8.817] (II) config/udev: Adding input device uinput-unifiedremote (/dev/input/event30)
[ 8.818] (**) uinput-unifiedremote: Applying InputClass "libinput pointer catchall"
[ 8.818] (**) uinput-unifiedremote: Applying InputClass "libinput keyboard catchall"
[ 8.818] (**) uinput-unifiedremote: Applying InputClass "system-keyboard"
[ 8.818] (II) Using input driver 'libinput' for 'uinput-unifiedremote'
[ 8.818] (**) uinput-unifiedremote: always reports core events
[ 8.818] (**) Option "Device" "/dev/input/event30"
[ 8.818] (**) Option "_source" "server/udev"
[ 8.818] (II) event30 - uinput-unifiedremote: is tagged by udev as: Keyboard Mouse
[ 8.819] (II) event30 - uinput-unifiedremote: device is a pointer
[ 8.819] (II) event30 - uinput-unifiedremote: device is a keyboard
[ 8.819] (II) event30 - uinput-unifiedremote: device removed
[ 8.831] (II) libinput: uinput-unifiedremote: needs a virtual subdevice
[ 8.831] (**) Option "config_info" "udev:/sys/devices/virtual/input/input30/event30"
[ 8.831] (II) XINPUT: Adding extended input device "uinput-unifiedremote" (type: MOUSE, id 20)
[ 8.831] (**) Option "AccelerationScheme" "none"
[ 8.831] (**) uinput-unifiedremote: (accel) selected scheme none/0
[ 8.831] (**) uinput-unifiedremote: (accel) acceleration factor: 2.000
[ 8.831] (**) uinput-unifiedremote: (accel) acceleration threshold: 4
[ 8.832] (II) event30 - uinput-unifiedremote: is tagged by udev as: Keyboard Mouse
[ 8.832] (II) event30 - uinput-unifiedremote: device is a pointer
[ 8.832] (II) event30 - uinput-unifiedremote: device is a keyboard
[ 8.833] (II) config/udev: Adding input device uinput-unifiedremote (/dev/input/mouse6)
[ 8.833] (**) uinput-unifiedremote: Applying InputClass "system-keyboard"
[ 8.833] (II) No input driver specified, ignoring this device.
[ 8.833] (II) This device may have been added with another device file.
[ 8.837] (**) ELECOM TrackBall Mouse HUGE TrackBall: Applying InputClass "libinput pointer catchall"
[ 8.837] (**) ELECOM TrackBall Mouse HUGE TrackBall: Applying InputClass "libinput keyboard catchall"
[ 8.837] (**) ELECOM TrackBall Mouse HUGE TrackBall: Applying InputClass "system-keyboard"
[ 8.837] (II) Using input driver 'libinput' for 'ELECOM TrackBall Mouse HUGE TrackBall'
[ 8.837] (**) ELECOM TrackBall Mouse HUGE TrackBall: always reports core events
[ 8.837] (**) Option "Device" "/dev/input/event27"
[ 8.838] (**) Option "_source" "_driver/libinput"
[ 8.838] (II) libinput: ELECOM TrackBall Mouse HUGE TrackBall: is a virtual subdevice
[ 8.838] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-2/1-2:1.0/0003:056E:010C.0005/input/input27/event27"
[ 8.838] (II) XINPUT: Adding extended input device "ELECOM TrackBall Mouse HUGE TrackBall" (type: KEYBOARD, id 21)
[ 8.838] (**) Option "xkb_model" "pc105"
[ 8.838] (**) Option "xkb_layout" "gb"
[ 8.838] (**) Option "xkb_variant" ",dvorak"
[ 8.838] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ 8.838] (**) UC-LOIC TABLET 1060 Pen eraser: Applying InputClass "libinput tablet catchall"
[ 8.838] (**) UC-LOIC TABLET 1060 Pen eraser: Applying InputClass "Graphics tablet pen"
[ 8.838] (II) Using input driver 'wacom' for 'UC-LOIC TABLET 1060 Pen eraser'
[ 8.838] (**) UC-LOIC TABLET 1060 Pen eraser: always reports core events
[ 8.838] (**) Option "Device" "/dev/input/event10"
[ 8.838] (**) Option "Type" "eraser"
[ 8.838] (**) UC-LOIC TABLET 1060 Pen eraser: panscroll is 13
[ 8.838] (**) UC-LOIC TABLET 1060 Pen eraser: panscroll modified to 13
[ 8.838] (--) UC-LOIC TABLET 1060 Pen eraser: maxX=2048 maxY=2048 maxZ=2047 resX=1016 resY=1016 tilt=enabled
[ 8.847] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-5/1-5:1.1/0003:5543:0081.0007/input/input10/event10"
[ 8.847] (II) XINPUT: Adding extended input device "UC-LOIC TABLET 1060 Pen eraser" (type: ERASER, id 22)
[ 8.847] (**) UC-LOIC TABLET 1060 Pen eraser: (accel) keeping acceleration scheme 1
[ 8.847] (**) UC-LOIC TABLET 1060 Pen eraser: (accel) acceleration profile 0
[ 8.847] (**) UC-LOIC TABLET 1060 Pen eraser: (accel) acceleration factor: 2.000
[ 8.847] (**) UC-LOIC TABLET 1060 Pen eraser: (accel) acceleration threshold: 4
[ 8.847] (**) uinput-unifiedremote: Applying InputClass "libinput pointer catchall"
[ 8.847] (**) uinput-unifiedremote: Applying InputClass "libinput keyboard catchall"
[ 8.847] (**) uinput-unifiedremote: Applying InputClass "system-keyboard"
[ 8.847] (II) Using input driver 'libinput' for 'uinput-unifiedremote'
[ 8.847] (**) uinput-unifiedremote: always reports core events
[ 8.847] (**) Option "Device" "/dev/input/event30"
[ 8.847] (**) Option "_source" "_driver/libinput"
[ 8.847] (II) libinput: uinput-unifiedremote: is a virtual subdevice
[ 8.847] (**) Option "config_info" "udev:/sys/devices/virtual/input/input30/event30"
[ 8.847] (II) XINPUT: Adding extended input device "uinput-unifiedremote" (type: KEYBOARD, id 23)
[ 8.847] (**) Option "xkb_model" "pc105"
[ 8.847] (**) Option "xkb_layout" "gb"
[ 8.847] (**) Option "xkb_variant" ",dvorak"
[ 8.847] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ 8.848] (II) config/udev: Adding input device uinput-unifiedremote (/dev/input/mouse6)
[ 8.848] (**) uinput-unifiedremote: Applying InputClass "system-keyboard"
[ 8.848] (II) No input driver specified, ignoring this device.
[ 8.848] (II) This device may have been added with another device file.
[ 8.848] (II) config/udev: removing device uinput-unifiedremote
[ 8.848] (II) UnloadModule: "libinput"
[ 8.848] (II) config/udev: removing device uinput-unifiedremote
[ 8.848] (II) event30 - uinput-unifiedremote: device removed
[ 8.859] (II) UnloadModule: "libinput"
[ 8.859] (II) config/udev: Adding input device uinput-unifiedremote (/dev/input/event30)
[ 8.859] (**) uinput-unifiedremote: Applying InputClass "libinput pointer catchall"
[ 8.859] (**) uinput-unifiedremote: Applying InputClass "libinput keyboard catchall"
[ 8.859] (**) uinput-unifiedremote: Applying InputClass "system-keyboard"
[ 8.859] (II) Using input driver 'libinput' for 'uinput-unifiedremote'
[ 8.859] (**) uinput-unifiedremote: always reports core events
[ 8.859] (**) Option "Device" "/dev/input/event30"
[ 8.859] (**) Option "_source" "server/udev"
[ 8.860] (II) event30 - uinput-unifiedremote: is tagged by udev as: Keyboard Mouse
[ 8.860] (II) event30 - uinput-unifiedremote: device is a pointer
[ 8.860] (II) event30 - uinput-unifiedremote: device is a keyboard
[ 8.860] (II) event30 - uinput-unifiedremote: device removed
[ 8.871] (II) libinput: uinput-unifiedremote: needs a virtual subdevice
[ 8.871] (**) Option "config_info" "udev:/sys/devices/virtual/input/input30/event30"
[ 8.871] (II) XINPUT: Adding extended input device "uinput-unifiedremote" (type: MOUSE, id 20)
[ 8.871] (**) Option "AccelerationScheme" "none"
[ 8.871] (**) uinput-unifiedremote: (accel) selected scheme none/0
[ 8.871] (**) uinput-unifiedremote: (accel) acceleration factor: 2.000
[ 8.871] (**) uinput-unifiedremote: (accel) acceleration threshold: 4
[ 8.872] (II) event30 - uinput-unifiedremote: is tagged by udev as: Keyboard Mouse
[ 8.872] (II) event30 - uinput-unifiedremote: device is a pointer
[ 8.872] (II) event30 - uinput-unifiedremote: device is a keyboard
[ 8.873] (**) uinput-unifiedremote: Applying InputClass "libinput pointer catchall"
[ 8.873] (**) uinput-unifiedremote: Applying InputClass "libinput keyboard catchall"
[ 8.873] (**) uinput-unifiedremote: Applying InputClass "system-keyboard"
[ 8.873] (II) Using input driver 'libinput' for 'uinput-unifiedremote'
[ 8.873] (**) uinput-unifiedremote: always reports core events
[ 8.873] (**) Option "Device" "/dev/input/event30"
[ 8.873] (**) Option "_source" "_driver/libinput"
[ 8.873] (II) libinput: uinput-unifiedremote: is a virtual subdevice
[ 8.873] (**) Option "config_info" "udev:/sys/devices/virtual/input/input30/event30"
[ 8.873] (II) XINPUT: Adding extended input device "uinput-unifiedremote" (type: KEYBOARD, id 23)
[ 8.873] (**) Option "xkb_model" "pc105"
[ 8.873] (**) Option "xkb_layout" "gb"
[ 8.873] (**) Option "xkb_variant" ",dvorak"
[ 8.873] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ 12.323] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 12.323] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 12.323] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 12.323] (--) NVIDIA(GPU-0):
[ 12.362] (--) NVIDIA(GPU-0): AOC Q3279WG5B (DFP-1): connected
[ 12.362] (--) NVIDIA(GPU-0): AOC Q3279WG5B (DFP-1): Internal TMDS
[ 12.362] (--) NVIDIA(GPU-0): AOC Q3279WG5B (DFP-1): 600.0 MHz maximum pixel clock
[ 12.362] (--) NVIDIA(GPU-0):
[ 12.362] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 12.362] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 12.362] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[ 12.362] (--) NVIDIA(GPU-0):
[ 12.362] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 12.362] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 12.362] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 12.362] (--) NVIDIA(GPU-0):
[ 12.362] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 12.363] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[ 12.363] (--) NVIDIA(GPU-0): DFP-4: 1440.0 MHz maximum pixel clock
[ 12.363] (--) NVIDIA(GPU-0):
[ 12.363] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 12.363] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[ 12.363] (--) NVIDIA(GPU-0): DFP-5: 165.0 MHz maximum pixel clock
[ 12.363] (--) NVIDIA(GPU-0):
[ 12.363] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 12.363] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 12.363] (--) NVIDIA(GPU-0): DFP-6: 1440.0 MHz maximum pixel clock
[ 12.363] (--) NVIDIA(GPU-0):
[ 12.363] (--) NVIDIA(GPU-0): DFP-7: disconnected
[ 12.363] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[ 12.363] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[ 12.363] (--) NVIDIA(GPU-0):
[ 21.625] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 21.625] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 21.625] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 21.625] (--) NVIDIA(GPU-0):
[ 21.655] (--) NVIDIA(GPU-0): AOC Q3279WG5B (DFP-1): connected
[ 21.655] (--) NVIDIA(GPU-0): AOC Q3279WG5B (DFP-1): Internal TMDS
[ 21.655] (--) NVIDIA(GPU-0): AOC Q3279WG5B (DFP-1): 600.0 MHz maximum pixel clock
[ 21.655] (--) NVIDIA(GPU-0):
[ 21.655] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 21.655] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 21.655] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[ 21.655] (--) NVIDIA(GPU-0):
[ 21.655] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 21.655] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 21.655] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 21.655] (--) NVIDIA(GPU-0):
[ 21.655] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 21.655] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[ 21.655] (--) NVIDIA(GPU-0): DFP-4: 1440.0 MHz maximum pixel clock
[ 21.655] (--) NVIDIA(GPU-0):
[ 21.656] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 21.656] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[ 21.656] (--) NVIDIA(GPU-0): DFP-5: 165.0 MHz maximum pixel clock
[ 21.656] (--) NVIDIA(GPU-0):
[ 21.656] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 21.656] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 21.656] (--) NVIDIA(GPU-0): DFP-6: 1440.0 MHz maximum pixel clock
[ 21.656] (--) NVIDIA(GPU-0):
[ 21.656] (--) NVIDIA(GPU-0): DFP-7: disconnected
[ 21.656] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[ 21.656] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[ 21.656] (--) NVIDIA(GPU-0):
[ 21.855] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0{ForceCompositionPipeline=On}"
[ 47407.790] (II) event1 - Power Button: device removed
[ 47407.819] (II) event0 - Power Button: device removed
[ 47407.829] (II) event29 - UVC Camera (046d:0823): device removed
[ 47407.883] (II) event12 - BurrBrown from Texas Instruments USB AUDIO CODEC: device removed
[ 47407.898] (II) event3 - CM Storm Trigger gaming Keyboard: device removed
[ 47407.911] (II) event4 - CM Storm Trigger gaming Keyboard System Control: device removed
[ 47407.936] (II) event5 - CM Storm Trigger gaming Keyboard Consumer Control: device removed
[ 47407.955] (II) event6 - CM Storm Trigger gaming Keyboard Mouse: device removed
[ 47407.976] (II) event2 - Corsair Corsair M30 Gaming Mouse: device removed
[ 47407.999] (II) event28 - Eee PC WMI hotkeys: device removed
[ 47408.019] (II) event27 - ELECOM TrackBall Mouse HUGE TrackBall: device removed
[ 47408.063] (II) event30 - uinput-unifiedremote: device removed
[ 47408.073] (II) UnloadModule: "libinput"
[ 47408.074] (II) UnloadModule: "libinput"
[ 47408.074] (II) UnloadModule: "wacom"
[ 47408.074] (II) UnloadModule: "libinput"
[ 47408.074] (II) UnloadModule: "libinput"
[ 47408.074] (II) UnloadModule: "libinput"
[ 47408.074] (II) UnloadModule: "libinput"
[ 47408.074] (II) UnloadModule: "libinput"
[ 47408.074] (II) UnloadModule: "libinput"
[ 47408.074] (II) UnloadModule: "libinput"
[ 47408.074] (II) UnloadModule: "libinput"
[ 47408.074] (II) UnloadModule: "wacom"
[ 47408.074] (II) UnloadModule: "wacom"
[ 47408.074] (II) UnloadModule: "wacom"
[ 47408.074] (II) UnloadModule: "libinput"
[ 47408.074] (II) UnloadModule: "libinput"
[ 47408.074] (II) UnloadModule: "libinput"
[ 47408.074] (II) UnloadModule: "libinput"
[ 47408.232] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 47408.239] (II) Server terminated successfully (0). Closing log file.Ryzen 5900X 12 core/24 thread - RTX 3090 FE 24 Gb, Asus B550-F Gaming MB, 128Gb Corsair DDR4, Fractal Design Define 7 XL, 5 HD (2 NvME PCI, 4SSD) + 1 x optical.
Linux user #545703
/ is the root of all problems.
Offline
#2 2020-07-18 21:16:07
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,687
Re: Random logout
journal, coredumpctl - that server terminated cleanly so what most likely happening is that your session (desktop environment, resp. the session keeping process) crashes.
Offline
#3 2020-07-18 21:58:58
- Roken
- Member
- From: South Wales, UK
- Registered: 2012-01-16
- Posts: 1,366
Re: Random logout
It looks like dbus is crashing from my limited understanding of journalctl. This is from immediately before (yet another) logout.
EDIT: I'll leave this here in case of ideas, but in the meantime, I have an NVME M2 drive due to arrive tomorrow, and the plan was a simple rsync, but I may just get a list of installed packages, reinstall from scratch, and then copy custom edits from /etc to the new drive. /home is already on a separate drive, anyway, so shouldn't be a major job to get a clean install configured identically.
Jul 18 22:49:50 Tex audit[1343]: ANOM_ABEND auid=1000 uid=1000 gid=100 ses=2 pid=1343 comm="dbus-daemon" exe="/usr/bin/dbus-daemon" sig=11 res=1
Jul 18 22:49:50 Tex kernel: dbus-daemon[1343]: segfault at 960a ip 000000000000960a sp 00007fff480d0a78 error 14 in dbus-daemon[561c3bf79000+8000]
Jul 18 22:49:50 Tex kernel: Code: Bad RIP value.
Jul 18 22:49:50 Tex kernel: audit: type=1701 audit(1595108990.992:96): auid=1000 uid=1000 gid=100 ses=2 pid=1343 comm="dbus-daemon" exe="/usr/bin/dbus-daemon" sig=11 res=1
Jul 18 22:49:51 Tex systemd[1]: Created slice system-systemd\x2dcoredump.slice.
Jul 18 22:49:51 Tex audit: BPF prog-id=16 op=LOAD
Jul 18 22:49:51 Tex kernel: audit: type=1334 audit(1595108991.001:97): prog-id=16 op=LOAD
Jul 18 22:49:51 Tex audit: BPF prog-id=17 op=LOAD
Jul 18 22:49:51 Tex kernel: audit: type=1334 audit(1595108991.002:98): prog-id=17 op=LOAD
Jul 18 22:49:51 Tex systemd[1]: Started Process Core Dump (PID 1134674/UID 0).
Jul 18 22:49:51 Tex audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-1134674-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:49:51 Tex kernel: audit: type=1130 audit(1595108991.004:99): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-1134674-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:49:51 Tex gvfsd[2574]: A connection to the bus can't be made
Jul 18 22:49:51 Tex kernel: xfce4-session[1330]: segfault at 2c ip 000055b39a5f0a70 sp 00007fffcf25c898 error 4 in xfce4-session[55b39a5de000+19000]
Jul 18 22:49:51 Tex kernel: Code: 49 89 c4 67 e8 e1 58 ff ff 4d 85 e4 74 14 48 83 c4 08 4c 89 e7 5d 41 5c ff 25 14 7b 01 00 0f 1f 40 00 48 83 c4 08 5d 41 5c c3 <8b> 47 2c c3 66 66 2e 0f 1f 84 00 00 00 00 00 90 8b 47 28 c3 66 66
Jul 18 22:49:51 Tex kernel: audit: type=1701 audit(1595108991.285:100): auid=1000 uid=1000 gid=100 ses=1 pid=1330 comm="xfce4-session" exe="/usr/bin/xfce4-session" sig=11 res=1
Jul 18 22:49:51 Tex kernel: audit: type=1334 audit(1595108991.302:101): prog-id=18 op=LOAD
Jul 18 22:49:51 Tex kernel: audit: type=1334 audit(1595108991.302:102): prog-id=19 op=LOAD
Jul 18 22:49:51 Tex kernel: audit: type=1130 audit(1595108991.304:103): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@1-1134680-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:49:51 Tex audit[1330]: ANOM_ABEND auid=1000 uid=1000 gid=100 ses=1 pid=1330 comm="xfce4-session" exe="/usr/bin/xfce4-session" sig=11 res=1
Jul 18 22:49:51 Tex audit: BPF prog-id=18 op=LOAD
Jul 18 22:49:51 Tex audit: BPF prog-id=19 op=LOAD
Jul 18 22:49:51 Tex audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@1-1134680-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:49:51 Tex audit[6414]: ANOM_ABEND auid=1000 uid=1000 gid=100 ses=1 pid=6414 comm="conky" exe="/usr/bin/conky" sig=6 res=1
Jul 18 22:49:51 Tex audit: BPF prog-id=20 op=LOAD
Jul 18 22:49:51 Tex audit: BPF prog-id=21 op=LOAD
Jul 18 22:49:51 Tex audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@2-1134689-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:49:51 Tex gvfsd[3049]: A connection to the bus can't be made
Jul 18 22:49:51 Tex polkitd[1401]: Unregistered Authentication Agent for unix-session:1 (system bus name :1.77, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_GB.utf8) (disconnected from bus)
Jul 18 22:49:51 Tex xfce4-notifyd[1878]: Another notification daemon is running, exiting
Jul 18 22:49:51 Tex unknown[1394]: Name org.xfce.Xfconf lost on the message dbus, exiting.
Jul 18 22:49:51 Tex gvfsd[1364]: A connection to the bus can't be made
Jul 18 22:49:51 Tex systemd[1318]: gvfs-gphoto2-volume-monitor.service: Succeeded.
Jul 18 22:49:51 Tex systemd[1318]: gvfs-mtp-volume-monitor.service: Succeeded.
Jul 18 22:49:51 Tex systemd[1]: run-user-1000-gvfs.mount: Succeeded.
Jul 18 22:49:51 Tex systemd[1318]: run-user-1000-gvfs.mount: Succeeded.
Jul 18 22:49:51 Tex systemd[1318]: dbus.service: Main process exited, code=dumped, status=11/SEGV
Jul 18 22:49:51 Tex systemd[1318]: dbus.service: Failed with result 'core-dump'.
Jul 18 22:49:51 Tex systemd[1]: Started Process Core Dump (PID 1134680/UID 0).
Jul 18 22:49:51 Tex systemd[1]: Started Process Core Dump (PID 1134689/UID 0).
Jul 18 22:49:51 Tex systemd-coredump[1134675]: Process 1343 (dbus-daemon) of user 1000 dumped core.
Stack trace of thread 1343:
#0 0x000000000000960a n/a (n/a + 0x0)
Jul 18 22:49:51 Tex systemd[1]: systemd-coredump@0-1134674-0.service: Succeeded.
Jul 18 22:49:51 Tex audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-1134674-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:49:51 Tex audit: BPF prog-id=17 op=UNLOAD
Jul 18 22:49:51 Tex audit: BPF prog-id=16 op=UNLOAD
Jul 18 22:49:51 Tex pulseaudio[1439]: ICE default IO error handler doing an exit(), pid = 1439, errno = 11
Jul 18 22:49:51 Tex audit[1315]: USER_END pid=1315 uid=0 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env,pam_gnome_keyring acct="steve" exe="/usr/lib/lxdm/lxdm-session" hostname=Tex addr=? terminal=tty1 res=success'
Jul 18 22:49:51 Tex lxdm-session[1315]: pam_unix(lxdm:session): session closed for user steve
Jul 18 22:49:51 Tex bluetoothd[792]: Endpoint unregistered: sender=:1.50 path=/MediaEndpoint/A2DPSink/sbc
Jul 18 22:49:51 Tex bluetoothd[792]: Endpoint unregistered: sender=:1.50 path=/MediaEndpoint/A2DPSource/sbc
Jul 18 22:49:51 Tex systemd-coredump[1134690]: Process 6414 (conky) of user 1000 dumped core.
Stack trace of thread 6414:
#0 0x00007f104c2a0355 raise (libc.so.6 + 0x3c355)
#1 0x00007f104c289853 abort (libc.so.6 + 0x25853)
#2 0x00005592be60e223 _ZL17x11_error_handlerP9_XDisplayP11XErrorEvent (conky + 0x88223)
#3 0x00007f104cba478b _XError (libX11.so.6 + 0x4378b)
#4 0x00007f104cba1538 n/a (libX11.so.6 + 0x40538)
#5 0x00007f104cba15d5 n/a (libX11.so.6 + 0x405d5)
#6 0x00007f104cba1f3a _XEventsQueued (libX11.so.6 + 0x40f3a)
#7 0x00007f104cb93932 XPending (libX11.so.6 + 0x32932)
#8 0x00005592be5aef3c _Z9main_loopv (conky + 0x28f3c)
#9 0x00005592be5a1c6b main (conky + 0x1bc6b)
#10 0x00007f104c28b002 __libc_start_main (libc.so.6 + 0x27002)
#11 0x00005592be5a6eae _start (conky + 0x20eae)
Jul 18 22:49:51 Tex systemd[1]: systemd-coredump@2-1134689-0.service: Succeeded.
Jul 18 22:49:51 Tex audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@2-1134689-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:49:51 Tex audit: BPF prog-id=21 op=UNLOAD
Jul 18 22:49:51 Tex audit: BPF prog-id=20 op=UNLOAD
Jul 18 22:49:51 Tex systemd-logind[800]: Session 1 logged out. Waiting for processes to exit.
Jul 18 22:49:51 Tex python[2254]: The X11 connection broke (error 1). Did the X11 server die?
Jul 18 22:49:52 Tex systemd-coredump[1134685]: Process 1330 (xfce4-session) of user 1000 dumped core.
Stack trace of thread 1330:
#0 0x000055b39a5f0a70 xfsm_manager_get_shutdown_type (xfce4-session + 0x24a70)
#1 0x000055b39a5e3c38 n/a (xfce4-session + 0x17c38)
#2 0x00007f0b60c9072f n/a (libgio-2.0.so.0 + 0xf672f)
#3 0x00007f0b60b55052 g_closure_invoke (libgobject-2.0.so.0 + 0x13052)
#4 0x00007f0b60b7d685 n/a (libgobject-2.0.so.0 + 0x3b685)
#5 0x00007f0b60b7141d g_signal_emit_valist (libgobject-2.0.so.0 + 0x2f41d)
#6 0x00007f0b60b71980 g_signal_emit (libgobject-2.0.so.0 + 0x2f980)
#7 0x00007f0b60c866a7 n/a (libgio-2.0.so.0 + 0xec6a7)
#8 0x00007f0b60a6b340 g_main_context_dispatch (libglib-2.0.so.0 + 0x52340)
#9 0x00007f0b60ab91d9 n/a (libglib-2.0.so.0 + 0xa01d9)
#10 0x00007f0b60a69c03 g_main_loop_run (libglib-2.0.so.0 + 0x50c03)
#11 0x00007f0b6123408f gtk_main (libgtk-3.so.0 + 0x1e008f)
#12 0x000055b39a5de17f main (xfce4-session + 0x1217f)
#13 0x00007f0b60855002 __libc_start_main (libc.so.6 + 0x27002)
#14 0x000055b39a5de3ee _start (xfce4-session + 0x123ee)
Stack trace of thread 1362:
#0 0x00007f0b6092305f __poll (libc.so.6 + 0xf505f)
#1 0x00007f0b60ab9168 n/a (libglib-2.0.so.0 + 0xa0168)
#2 0x00007f0b60a6a221 g_main_context_iteration (libglib-2.0.so.0 + 0x51221)
#3 0x00007f0b60a6a272 n/a (libglib-2.0.so.0 + 0x51272)
#4 0x00007f0b60a93511 n/a (libglib-2.0.so.0 + 0x7a511)
#5 0x00007f0b60a00422 start_thread (libpthread.so.0 + 0x9422)
#6 0x00007f0b6092dbf3 __clone (libc.so.6 + 0xffbf3)
Stack trace of thread 1363:
#0 0x00007f0b6092305f __poll (libc.so.6 + 0xf505f)
#1 0x00007f0b60ab9168 n/a (libglib-2.0.so.0 + 0xa0168)
#2 0x00007f0b60a69c03 g_main_loop_run (libglib-2.0.so.0 + 0x50c03)
#3 0x00007f0b60c9a1a8 n/a (libgio-2.0.so.0 + 0x1001a8)
#4 0x00007f0b60a93511 n/a (libglib-2.0.so.0 + 0x7a511)
#5 0x00007f0b60a00422 start_thread (libpthread.so.0 + 0x9422)
#6 0x00007f0b6092dbf3 __clone (libc.so.6 + 0xffbf3)
Jul 18 22:49:52 Tex audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@1-1134680-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:49:52 Tex systemd[1]: systemd-coredump@1-1134680-0.service: Succeeded.
Jul 18 22:49:52 Tex audit: BPF prog-id=19 op=UNLOAD
Jul 18 22:49:52 Tex audit: BPF prog-id=18 op=UNLOAD
Jul 18 22:50:00 Tex lxdm-session[1134727]: PAM unable to dlopen(/usr/lib/security/pam_python.so): /usr/lib/security/pam_python.so: cannot open shared object file: No such file or directory
Jul 18 22:50:00 Tex lxdm-session[1134727]: PAM adding faulty module: /usr/lib/security/pam_python.so
Jul 18 22:50:00 Tex audit[1134727]: USER_AUTH pid=1134727 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_tally2,pam_shells,pam_unix,pam_permit,pam_gnome_keyring acct="steve" exe="/usr/lib/lxdm/lxdm-session" hostname=? addr=? terminal=? res=success'
Jul 18 22:50:00 Tex lxdm-session[1134727]: gkr-pam: unable to locate daemon control file
Jul 18 22:50:00 Tex lxdm-session[1134727]: gkr-pam: stashed password to try later in open session
Jul 18 22:50:00 Tex kernel: kauditd_printk_skb: 14 callbacks suppressed
Jul 18 22:50:00 Tex kernel: audit: type=1100 audit(1595109000.610:118): pid=1134727 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_tally2,pam_shells,pam_unix,pam_permit,pam_gnome_keyring acct="steve" exe="/usr/lib/lxdm/lxdm-session" hostname=? addr=? terminal=? res=success'
Jul 18 22:50:00 Tex audit[1134727]: USER_ACCT pid=1134727 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="steve" exe="/usr/lib/lxdm/lxdm-session" hostname=? addr=? terminal=? res=success'
Jul 18 22:50:00 Tex kernel: audit: type=1101 audit(1595109000.645:119): pid=1134727 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="steve" exe="/usr/lib/lxdm/lxdm-session" hostname=? addr=? terminal=? res=success'
Jul 18 22:50:00 Tex audit[1134727]: SYSCALL arch=c000003e syscall=1 success=yes exit=4 a0=3 a1=7ffc66219430 a2=4 a3=7ffc66219144 items=0 ppid=826 pid=1134727 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="lxdm-session" exe="/usr/lib/lxdm/lxdm-session" key=(null)
Jul 18 22:50:00 Tex audit: PROCTITLE proctitle="/usr/lib/lxdm/lxdm-session"
Jul 18 22:50:00 Tex kernel: audit: type=1006 audit(1595109000.648:120): pid=1134727 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
Jul 18 22:50:00 Tex kernel: audit: type=1300 audit(1595109000.648:120): arch=c000003e syscall=1 success=yes exit=4 a0=3 a1=7ffc66219430 a2=4 a3=7ffc66219144 items=0 ppid=826 pid=1134727 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="lxdm-session" exe="/usr/lib/lxdm/lxdm-session" key=(null)
Jul 18 22:50:00 Tex kernel: audit: type=1327 audit(1595109000.648:120): proctitle="/usr/lib/lxdm/lxdm-session"
Jul 18 22:50:00 Tex lxdm-session[1134727]: pam_unix(lxdm:session): session opened for user steve by (uid=0)
Jul 18 22:50:00 Tex systemd-logind[800]: New session 3 of user steve.
Jul 18 22:50:00 Tex systemd[1]: Started Session 3 of user steve.
Jul 18 22:50:00 Tex lxdm-session[1134727]: gkr-pam: gnome-keyring-daemon started properly and unlocked keyring
Jul 18 22:50:00 Tex audit[1134727]: USER_START pid=1134727 uid=0 auid=1000 ses=3 msg='op=PAM:session_open grantors=pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env,pam_gnome_keyring acct="steve" exe="/usr/lib/lxdm/lxdm-session" hostname=Tex addr=? terminal=tty1 res=success'
Jul 18 22:50:00 Tex kernel: audit: type=1105 audit(1595109000.670:121): pid=1134727 uid=0 auid=1000 ses=3 msg='op=PAM:session_open grantors=pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env,pam_gnome_keyring acct="steve" exe="/usr/lib/lxdm/lxdm-session" hostname=Tex addr=? terminal=tty1 res=success'
Jul 18 22:50:20 Tex root[1134746]: ACPI group/action undefined: jack/lineout / LINEOUT
Jul 18 22:50:20 Tex root[1134748]: ACPI group/action undefined: jack/videoout / VIDEOOUT
Jul 18 22:50:20 Tex acpid[789]: client 1242[0:0] has disconnected
Jul 18 22:50:20 Tex acpid[789]: client 1242[0:0] has disconnected
Jul 18 22:50:20 Tex systemd[1]: Started Getty on tty2.
Jul 18 22:50:20 Tex audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:50:20 Tex kernel: audit: type=1130 audit(1595109020.654:122): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:50:20 Tex root[1134751]: ACPI group/action undefined: jack/lineout / LINEOUT
Jul 18 22:50:20 Tex root[1134753]: ACPI group/action undefined: jack/videoout / VIDEOOUT
Jul 18 22:50:28 Tex audit[1134750]: USER_AUTH pid=1134750 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_unix,pam_tally acct="steve" exe="/usr/bin/login" hostname=Tex addr=? terminal=tty2 res=success'
Jul 18 22:50:28 Tex kernel: audit: type=1100 audit(1595109028.967:123): pid=1134750 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_unix,pam_tally acct="steve" exe="/usr/bin/login" hostname=Tex addr=? terminal=tty2 res=success'
Jul 18 22:50:28 Tex audit[1134750]: USER_ACCT pid=1134750 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_time,pam_unix acct="steve" exe="/usr/bin/login" hostname=Tex addr=? terminal=tty2 res=success'
Jul 18 22:50:28 Tex kernel: audit: type=1101 audit(1595109028.968:124): pid=1134750 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_time,pam_unix acct="steve" exe="/usr/bin/login" hostname=Tex addr=? terminal=tty2 res=success'
Jul 18 22:50:28 Tex kernel: audit: type=1103 audit(1595109028.968:125): pid=1134750 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_unix,pam_tally acct="steve" exe="/usr/bin/login" hostname=Tex addr=? terminal=tty2 res=success'
Jul 18 22:50:28 Tex audit[1134750]: CRED_ACQ pid=1134750 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_unix,pam_tally acct="steve" exe="/usr/bin/login" hostname=Tex addr=? terminal=tty2 res=success'
Jul 18 22:50:28 Tex login[1134750]: pam_unix(login:session): session opened for user steve by LOGIN(uid=0)
Jul 18 22:50:28 Tex audit[1134750]: SYSCALL arch=c000003e syscall=1 success=yes exit=4 a0=4 a1=7ffd71632700 a2=4 a3=7ffd71632414 items=0 ppid=1 pid=1134750 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty2 ses=4 comm="login" exe="/usr/bin/login" key=(null)
Jul 18 22:50:28 Tex audit: PROCTITLE proctitle=2F62696E2F6C6F67696E002D70002D2D002020202020
Jul 18 22:50:28 Tex kernel: audit: type=1006 audit(1595109028.979:126): pid=1134750 uid=0 old-auid=4294967295 auid=1000 tty=tty2 old-ses=4294967295 ses=4 res=1
Jul 18 22:50:28 Tex kernel: audit: type=1300 audit(1595109028.979:126): arch=c000003e syscall=1 success=yes exit=4 a0=4 a1=7ffd71632700 a2=4 a3=7ffd71632414 items=0 ppid=1 pid=1134750 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty2 ses=4 comm="login" exe="/usr/bin/login" key=(null)
Jul 18 22:50:28 Tex kernel: audit: type=1327 audit(1595109028.979:126): proctitle=2F62696E2F6C6F67696E002D70002D2D002020202020
Jul 18 22:50:28 Tex systemd-logind[800]: New session 4 of user steve.
Jul 18 22:50:28 Tex systemd[1]: Started Session 4 of user steve.
Jul 18 22:50:28 Tex audit[1134750]: USER_START pid=1134750 uid=0 auid=1000 ses=4 msg='op=PAM:session_open grantors=pam_unix,pam_env,pam_limits,pam_mail,pam_lastlog,pam_loginuid,pam_systemd acct="steve" exe="/usr/bin/login" hostname=Tex addr=? terminal=tty2 res=success'
Jul 18 22:50:28 Tex kernel: audit: type=1105 audit(1595109028.992:127): pid=1134750 uid=0 auid=1000 ses=4 msg='op=PAM:session_open grantors=pam_unix,pam_env,pam_limits,pam_mail,pam_lastlog,pam_loginuid,pam_systemd acct="steve" exe="/usr/bin/login" hostname=Tex addr=? terminal=tty2 res=success'
Jul 18 22:50:28 Tex kernel: audit: type=1110 audit(1595109028.993:128): pid=1134750 uid=0 auid=1000 ses=4 msg='op=PAM:setcred grantors=pam_securetty,pam_unix,pam_tally acct="steve" exe="/usr/bin/login" hostname=Tex addr=? terminal=tty2 res=success'
Jul 18 22:50:28 Tex audit[1134750]: CRED_REFR pid=1134750 uid=0 auid=1000 ses=4 msg='op=PAM:setcred grantors=pam_securetty,pam_unix,pam_tally acct="steve" exe="/usr/bin/login" hostname=Tex addr=? terminal=tty2 res=success'
Jul 18 22:50:28 Tex login[1134750]: LOGIN ON tty2 BY steve
Jul 18 22:50:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: in0: +0.40 V (min = +2.26 V, max = +1.38 V) [ALARM]
Jul 18 22:50:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: in4: +0.03 V (min = +2.77 V, max = +2.78 V) [ALARM]
Jul 18 22:50:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: in6: +0.03 V (min = +2.60 V, max = +1.15 V) [ALARM]
Jul 18 22:50:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: 3VSB: +3.29 V (min = +4.84 V, max = +2.40 V) [ALARM]
Jul 18 22:50:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: CPU Temp: 37.0 C (min = 70.0 C, max = -98.0 C) [ALARM]
Jul 18 22:50:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: Chipset: 42.0 C (min = -3.0 C, max = -43.0 C) [ALARM]
Jul 18 22:50:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: temp4: 42.0 C (min = -37.0 C, max = -4.0 C) [ALARM]
Jul 18 22:51:17 Tex dbus-daemon[795]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.4' (uid=0 pid=797 comm="/usr/bin/NetworkManager --no-daemon ")
Jul 18 22:51:17 Tex dbus-daemon[795]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Jul 18 22:51:21 Tex systemd[1318]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
Jul 18 22:51:21 Tex systemd[1318]: pulseaudio.service: Failed with result 'exit-code'.
Jul 18 22:51:21 Tex systemd[1318]: gvfs-udisks2-volume-monitor.service: Succeeded.
Jul 18 22:51:21 Tex systemd[1318]: xfce4-notifyd.service: Succeeded.
Jul 18 22:51:21 Tex systemd[1318]: obex.service: Main process exited, code=exited, status=1/FAILURE
Jul 18 22:51:21 Tex systemd[1318]: obex.service: Failed with result 'exit-code'.
Jul 18 22:51:21 Tex systemd[1318]: at-spi-dbus-bus.service: Succeeded.
Jul 18 22:51:21 Tex systemd[1318]: gvfs-daemon.service: Succeeded.
Jul 18 22:51:21 Tex systemd[1318]: Started D-Bus User Message Bus.
Jul 18 22:51:21 Tex systemd[1318]: pulseaudio.service: Scheduled restart job, restart counter is at 1.
Jul 18 22:51:21 Tex systemd[1318]: Stopped Sound Service.
Jul 18 22:51:21 Tex systemd[1318]: Starting Sound Service...
Jul 18 22:51:21 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Activating via systemd: service name='org.gtk.vfs.Daemon' unit='gvfs-daemon.service' requested by ':1.4' (uid=1000 pid=1134733 comm="xfce4-session ")
Jul 18 22:51:21 Tex systemd[1318]: Starting Virtual filesystem service...
Jul 18 22:51:21 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Successfully activated service 'org.gtk.vfs.Daemon'
Jul 18 22:51:21 Tex systemd[1318]: Started Virtual filesystem service.
Jul 18 22:51:21 Tex rtkit-daemon[1570]: Successfully made thread 1134855 of process 1134855 owned by '1000' high priority at nice level -11.
Jul 18 22:51:21 Tex rtkit-daemon[1570]: Supervising 1 threads of 1 processes of 1 users.
Jul 18 22:51:21 Tex pulseaudio[1134855]: W: [pulseaudio] pid.c: Stale PID file, overwriting.
Jul 18 22:51:21 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Activating via systemd: service name='org.a11y.Bus' unit='at-spi-dbus-bus.service' requested by ':1.8' (uid=1000 pid=1134733 comm="xfce4-session ")
Jul 18 22:51:21 Tex systemd[1318]: Starting Accessibility services bus...
Jul 18 22:51:22 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Successfully activated service 'org.a11y.Bus'
Jul 18 22:51:22 Tex systemd[1318]: Started Accessibility services bus.
Jul 18 22:51:22 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Activating service name='org.xfce.Xfconf' requested by ':1.4' (uid=1000 pid=1134733 comm="xfce4-session ")
Jul 18 22:51:22 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Successfully activated service 'org.xfce.Xfconf'
Jul 18 22:51:22 Tex at-spi-bus-launcher[1134887]: dbus-daemon[1134887]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=1000 pid=1134733 comm="xfce4-session ")
Jul 18 22:51:22 Tex at-spi-bus-launcher[1134887]: dbus-daemon[1134887]: Successfully activated service 'org.a11y.atspi.Registry'
Jul 18 22:51:22 Tex at-spi-bus-launcher[1134895]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jul 18 22:51:22 Tex dbus-daemon[795]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.1083' (uid=1000 pid=1134855 comm="/usr/bin/pulseaudio --daemonize=no ")
Jul 18 22:51:22 Tex audit: BPF prog-id=22 op=LOAD
Jul 18 22:51:22 Tex kernel: audit: type=1334 audit(1595109082.302:129): prog-id=22 op=LOAD
Jul 18 22:51:22 Tex kernel: audit: type=1334 audit(1595109082.303:130): prog-id=23 op=LOAD
Jul 18 22:51:22 Tex audit: BPF prog-id=23 op=LOAD
Jul 18 22:51:22 Tex systemd[1]: Starting Hostname Service...
Jul 18 22:51:22 Tex pulseaudio[1134855]: E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-esound-protocol-tcp.so: module-esound-protocol-tcp.so: cannot open shared object file: No such file or directory
Jul 18 22:51:22 Tex pulseaudio[1134855]: E: [pulseaudio] module.c: Failed to open module "module-esound-protocol-tcp".
Jul 18 22:51:22 Tex pulseaudio[1134855]: E: [pulseaudio] stdin-util.c: pa_module_load() failed
Jul 18 22:51:22 Tex pulseaudio[1134855]: E: [pulseaudio] module.c: Module "module-zeroconf-publish" should be loaded once at most. Refusing to load.
Jul 18 22:51:22 Tex pulseaudio[1134855]: E: [pulseaudio] stdin-util.c: pa_module_load() failed
Jul 18 22:51:22 Tex pulseaudio[1134855]: W: [pulseaudio] resampler.c: Support for resampler 'src-sinc-best-quality' not compiled in, reverting to 'auto'.
Jul 18 22:51:22 Tex pulseaudio[1134855]: W: [pulseaudio] module-loopback.c: Cannot set requested sink latency of 66.67 ms, adjusting to 100.00 ms
Jul 18 22:51:22 Tex systemd[1318]: Started Sound Service.
Jul 18 22:51:22 Tex dbus-daemon[795]: [system] Successfully activated service 'org.freedesktop.hostname1'
Jul 18 22:51:22 Tex systemd[1]: Started Hostname Service.
Jul 18 22:51:22 Tex audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:51:22 Tex kernel: audit: type=1130 audit(1595109082.572:131): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:51:22 Tex bluetoothd[792]: Endpoint registered: sender=:1.1083 path=/MediaEndpoint/A2DPSink/sbc
Jul 18 22:51:22 Tex bluetoothd[792]: Endpoint registered: sender=:1.1083 path=/MediaEndpoint/A2DPSource/sbc
Jul 18 22:51:24 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Activating service name='org.freedesktop.thumbnails.Thumbnailer1' requested by ':1.71' (uid=1000 pid=1135142 comm="xfdesktop --display :0.0 --sm-client-id 23e8cd61e-")
Jul 18 22:51:24 Tex tumblerd[1135162]: Failed to load plugin "tumbler-raw-thumbnailer.so": libopenrawgnome.so.7: cannot open shared object file: No such file or directory
Jul 18 22:51:24 Tex tumblerd[1135162]: Failed to load plugin "tumbler-odf-thumbnailer.so": libgsf-1.so.114: cannot open shared object file: No such file or directory
Jul 18 22:51:24 Tex org.freedesktop.thumbnails.Thumbnailer1[1135162]: Registered thumbnailer ffmpegthumbnailer -i %i -o %o -s %s -f
Jul 18 22:51:24 Tex org.freedesktop.thumbnails.Thumbnailer1[1135162]: Registered thumbnailer /usr/bin/gdk-pixbuf-thumbnailer -s %s %u %o
Jul 18 22:51:24 Tex org.freedesktop.thumbnails.Thumbnailer1[1135162]: Registered thumbnailer evince-thumbnailer -s %s %u %o
Jul 18 22:51:24 Tex org.freedesktop.thumbnails.Thumbnailer1[1135162]: Registered thumbnailer heif-thumbnailer -s %s %i %o
Jul 18 22:51:24 Tex org.freedesktop.thumbnails.Thumbnailer1[1135162]: Registered thumbnailer gnome-thumbnail-font --size %s %u %o
Jul 18 22:51:24 Tex org.freedesktop.thumbnails.Thumbnailer1[1135162]: Registered thumbnailer /usr/bin/gdk-pixbuf-thumbnailer -s %s %u %o
Jul 18 22:51:24 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Activating via systemd: service name='org.gtk.vfs.UDisks2VolumeMonitor' unit='gvfs-udisks2-volume-monitor.service' requested by ':1.76' (uid=1000 pid=1135162 comm="/usr/lib/tumbler-1/tumblerd ")
Jul 18 22:51:24 Tex systemd[1318]: Starting Virtual filesystem service - disk device monitor...
Jul 18 22:51:24 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Successfully activated service 'org.gtk.vfs.UDisks2VolumeMonitor'
Jul 18 22:51:24 Tex systemd[1318]: Started Virtual filesystem service - disk device monitor.
Jul 18 22:51:24 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Activating via systemd: service name='org.gtk.vfs.MTPVolumeMonitor' unit='gvfs-mtp-volume-monitor.service' requested by ':1.76' (uid=1000 pid=1135162 comm="/usr/lib/tumbler-1/tumblerd ")
Jul 18 22:51:24 Tex synergy[1135160]: *** WARNING *** The program 'synergy' uses the Apple Bonjour compatibility layer of Avahi.
Jul 18 22:51:24 Tex synergy[1135160]: *** WARNING *** Please fix your application to use the native API of Avahi!
Jul 18 22:51:24 Tex synergy[1135160]: *** WARNING *** For more information see <http://0pointer.de/blog/projects/avahi-compat.html>
Jul 18 22:51:24 Tex synergy[1135160]: *** WARNING *** The program 'synergy' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi.
Jul 18 22:51:24 Tex synergy[1135160]: *** WARNING *** Please fix your application to use the native API of Avahi!
Jul 18 22:51:24 Tex synergy[1135160]: *** WARNING *** For more information see <http://0pointer.de/blog/projects/avahi-compat.html>
Jul 18 22:51:24 Tex systemd[1318]: Starting Virtual filesystem service - Media Transfer Protocol monitor...
Jul 18 22:51:24 Tex synergy[1135160]: *** WARNING *** The program 'synergy' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi.
Jul 18 22:51:24 Tex synergy[1135160]: *** WARNING *** Please fix your application to use the native API of Avahi!
Jul 18 22:51:24 Tex synergy[1135160]: *** WARNING *** For more information see <http://0pointer.de/blog/projects/avahi-compat.html>
Jul 18 22:51:24 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Successfully activated service 'org.gtk.vfs.MTPVolumeMonitor'
Jul 18 22:51:24 Tex synergy[1135160]: ("-f", "--no-tray", "--debug", "INFO", "--name", "Tex", "-c", "/home/steve/synergy.conf", "--address", ":24800")
Jul 18 22:51:24 Tex systemd[1318]: Started Virtual filesystem service - Media Transfer Protocol monitor.
Jul 18 22:51:24 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Activating via systemd: service name='org.gtk.vfs.GPhoto2VolumeMonitor' unit='gvfs-gphoto2-volume-monitor.service' requested by ':1.76' (uid=1000 pid=1135162 comm="/usr/lib/tumbler-1/tumblerd ")
Jul 18 22:51:24 Tex systemd[1318]: Starting Virtual filesystem service - digital camera monitor...
Jul 18 22:51:24 Tex synergy[1135160]: QString::arg: Argument missing: Synergy is waiting for clients,
Jul 18 22:51:24 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Successfully activated service 'org.gtk.vfs.GPhoto2VolumeMonitor'
Jul 18 22:51:24 Tex systemd[1318]: Started Virtual filesystem service - digital camera monitor.
Jul 18 22:51:24 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Successfully activated service 'org.freedesktop.thumbnails.Thumbnailer1'
Jul 18 22:51:24 Tex nextcloud[1135159]: 2020-07-18 22:51:24:790 [ debug default ] [ unknown ]: static bool LibSecretKeyring::findPassword(const QString&, const QString&, QKeychain::JobPrivate*)
Jul 18 22:51:24 Tex nextcloud[1135159]: 2020-07-18 22:51:24:848 [ debug default ] [ unknown ]: static bool LibSecretKeyring::findPassword(const QString&, const QString&, QKeychain::JobPrivate*)
Jul 18 22:51:24 Tex nextcloud[1135159]: 2020-07-18 22:51:24:849 [ debug default ] [ unknown ]: static bool LibSecretKeyring::findPassword(const QString&, const QString&, QKeychain::JobPrivate*)
Jul 18 22:51:24 Tex nextcloud[1135159]: 2020-07-18 22:51:24:851 [ debug default ] [ unknown ]: static bool LibSecretKeyring::findPassword(const QString&, const QString&, QKeychain::JobPrivate*)
Jul 18 22:51:24 Tex nextcloud[1135159]: 2020-07-18 22:51:24:852 [ debug default ] [ unknown ]: static bool LibSecretKeyring::findPassword(const QString&, const QString&, QKeychain::JobPrivate*)
Jul 18 22:51:25 Tex synergy[1135160]: QString::arg: Argument missing: Synergy is running (without TLS encryption),
Jul 18 22:51:25 Tex nextcloud[1135159]: 2020-07-18 22:51:25:716 [ debug default ] [ unknown ]: static bool LibSecretKeyring::writePassword(const QString&, const QString&, const QString&, QKeychain::JobPrivate::Mode, const QByteArray&, QKeychain::JobPrivate*)
Jul 18 22:51:25 Tex gnome-keyring-daemon[1134730]: asked to register item /org/freedesktop/secrets/collection/Default_5fkeyring/267, but it's already registered
Jul 18 22:51:27 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Activating via systemd: service name='org.freedesktop.Notifications' unit='xfce4-notifyd.service' requested by ':1.84' (uid=1000 pid=1135158 comm="/home/steve/.dropbox-dist/dropbox-lnx.x86_64-101.4")
Jul 18 22:51:27 Tex systemd[1318]: Starting XFCE notifications service...
Jul 18 22:51:27 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Successfully activated service 'org.freedesktop.Notifications'
Jul 18 22:51:27 Tex systemd[1318]: Started XFCE notifications service.
Jul 18 22:51:32 Tex noip2[1135407]: v2.1.9 daemon started with NAT enabled
Jul 18 22:51:32 Tex audit[1135493]: USER_AUTH pid=1135493 uid=1000 auid=1000 ses=3 msg='op=PAM:authentication grantors=pam_unix,pam_permit acct="steve" exe="/usr/bin/sudo" hostname=? addr=? terminal=? res=success'
Jul 18 22:51:32 Tex audit[1135493]: USER_ACCT pid=1135493 uid=1000 auid=1000 ses=3 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="steve" exe="/usr/bin/sudo" hostname=? addr=? terminal=? res=success'
Jul 18 22:51:32 Tex sudo[1135493]: steve : TTY=unknown ; PWD=/home/steve ; USER=root ; COMMAND=/usr/bin/vorta
Jul 18 22:51:32 Tex audit[1135493]: CRED_REFR pid=1135493 uid=0 auid=1000 ses=3 msg='op=PAM:setcred grantors=pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=? res=success'
Jul 18 22:51:32 Tex kernel: audit: type=1100 audit(1595109092.662:132): pid=1135493 uid=1000 auid=1000 ses=3 msg='op=PAM:authentication grantors=pam_unix,pam_permit acct="steve" exe="/usr/bin/sudo" hostname=? addr=? terminal=? res=success'
Jul 18 22:51:32 Tex kernel: audit: type=1101 audit(1595109092.662:133): pid=1135493 uid=1000 auid=1000 ses=3 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="steve" exe="/usr/bin/sudo" hostname=? addr=? terminal=? res=success'
Jul 18 22:51:32 Tex kernel: audit: type=1110 audit(1595109092.662:134): pid=1135493 uid=0 auid=1000 ses=3 msg='op=PAM:setcred grantors=pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=? res=success'
Jul 18 22:51:32 Tex sudo[1135493]: pam_unix(sudo:session): session opened for user root by (uid=0)
Jul 18 22:51:32 Tex audit[1135493]: USER_START pid=1135493 uid=0 auid=1000 ses=3 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=? res=success'
Jul 18 22:51:32 Tex kernel: audit: type=1105 audit(1595109092.665:135): pid=1135493 uid=0 auid=1000 ses=3 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=? res=success'
Jul 18 22:51:32 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Activating via systemd: service name='org.freedesktop.Tracker1' unit='tracker-store.service' requested by ':1.94' (uid=1000 pid=1135546 comm="gdbus call -e -d org.freedesktop.DBus -o /org/free")
Jul 18 22:51:32 Tex systemd[1318]: Starting Tracker metadata database store and lookup manager...
Jul 18 22:51:32 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Successfully activated service 'org.freedesktop.Tracker1'
Jul 18 22:51:32 Tex systemd[1318]: Started Tracker metadata database store and lookup manager.
Jul 18 22:51:32 Tex polkitd[1401]: Registered Authentication Agent for unix-session:3 (system bus name :1.1115 [/usr/lib/xfce-polkit/xfce-polkit], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_GB.utf8)
Jul 18 22:51:32 Tex NetworkManager[797]: <info> [1595109092.8374] agent-manager: agent[5c7a6ccf562793a0,:1.1114/org.freedesktop.nm-applet/1000]: agent registered
Jul 18 22:51:33 Tex nextcloud[1135432]: nextcloud.gui.application: Already running, exiting...
Jul 18 22:51:33 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Activating service name='ca.desrt.dconf' requested by ':1.90' (uid=1000 pid=1135488 comm="pulseeffects --gapplication-service ")
Jul 18 22:51:33 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Successfully activated service 'ca.desrt.dconf'
Jul 18 22:51:33 Tex dbus-daemon[795]: [system] Activating via systemd: service name='org.blueman.Mechanism' unit='blueman-mechanism.service' requested by ':1.1119' (uid=1000 pid=1135470 comm="/usr/bin/python /usr/bin/blueman-applet ")
Jul 18 22:51:33 Tex systemd[1]: Starting Bluetooth management mechanism...
Jul 18 22:51:33 Tex blueman-mechanism[1136364]: Unable to init server: Could not connect: Connection refused
Jul 18 22:51:33 Tex blueman-mechanism[1136364]: Unable to init server: Could not connect: Connection refused
Jul 18 22:51:33 Tex pulseaudio[1134855]: W: [pulseaudio] module-loopback.c: Cannot set requested sink latency of 66.67 ms, adjusting to 50.00 ms
Jul 18 22:51:33 Tex pulseaudio[1134855]: W: [pulseaudio] resampler.c: Support for resampler 'src-sinc-best-quality' not compiled in, reverting to 'auto'.
Jul 18 22:51:33 Tex blueman-mechani[1136364]: gtk_icon_theme_get_for_screen: assertion 'GDK_IS_SCREEN (screen)' failed
Jul 18 22:51:33 Tex dbus-daemon[795]: [system] Successfully activated service 'org.blueman.Mechanism'
Jul 18 22:51:33 Tex systemd[1]: Started Bluetooth management mechanism.
Jul 18 22:51:33 Tex audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=blueman-mechanism comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:51:33 Tex kernel: audit: type=1130 audit(1595109093.328:136): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=blueman-mechanism comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:51:33 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Activating via systemd: service name='org.bluez.obex' unit='dbus-org.bluez.obex.service' requested by ':1.102' (uid=1000 pid=1135470 comm="/usr/bin/python /usr/bin/blueman-applet ")
Jul 18 22:51:33 Tex systemd[1318]: Starting Bluetooth OBEX service...
Jul 18 22:51:33 Tex obexd[1136417]: OBEX daemon 5.54
Jul 18 22:51:33 Tex dbus-daemon[1134849]: [session uid=1000 pid=1134849] Successfully activated service 'org.bluez.obex'
Jul 18 22:51:33 Tex systemd[1318]: Started Bluetooth OBEX service.
Jul 18 22:51:33 Tex python[1135502]: QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
Jul 18 22:51:35 Tex noip2[1135407]: No host 'texwar.ddns.net' found at dynupdate.no-ip.com.
Jul 18 22:51:37 Tex baloo_file[1135524]: replace called with invalid arguments, docId: 21392102524979249 url: "/home/steve/"
Jul 18 22:51:42 Tex pulseaudio[1134855]: E: [alsa-sink-ALC1220 Analog] alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write.
Jul 18 22:51:42 Tex pulseaudio[1134855]: E: [alsa-sink-ALC1220 Analog] alsa-sink.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers.
Jul 18 22:51:42 Tex pulseaudio[1134855]: E: [alsa-sink-ALC1220 Analog] alsa-sink.c: We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail.
Jul 18 22:51:43 Tex pulseaudio[1134855]: W: [pulseaudio] module-loopback.c: Too many underruns, increasing latency to 205.00 ms
Jul 18 22:51:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: in0: +1.29 V (min = +2.26 V, max = +1.38 V) [ALARM]
Jul 18 22:51:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: in4: +0.03 V (min = +2.77 V, max = +2.78 V) [ALARM]
Jul 18 22:51:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: in6: +0.03 V (min = +2.60 V, max = +1.15 V) [ALARM]
Jul 18 22:51:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: 3VSB: +3.31 V (min = +4.84 V, max = +2.40 V) [ALARM]
Jul 18 22:51:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: CPU Temp: 42.0 C (min = 70.0 C, max = -98.0 C) [ALARM]
Jul 18 22:51:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: Chipset: 43.0 C (min = -3.0 C, max = -43.0 C) [ALARM]
Jul 18 22:51:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: temp4: 43.0 C (min = -37.0 C, max = -4.0 C) [ALARM]
Jul 18 22:51:52 Tex systemd[1]: systemd-hostnamed.service: Succeeded.
Jul 18 22:51:52 Tex audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:51:52 Tex kernel: audit: type=1131 audit(1595109112.595:137): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:51:52 Tex audit: BPF prog-id=23 op=UNLOAD
Jul 18 22:51:52 Tex audit: BPF prog-id=22 op=UNLOAD
Jul 18 22:51:52 Tex kernel: audit: type=1334 audit(1595109112.640:138): prog-id=23 op=UNLOAD
Jul 18 22:51:52 Tex kernel: audit: type=1334 audit(1595109112.640:139): prog-id=22 op=UNLOAD
Jul 18 22:52:02 Tex tracker-store[1135609]: OK
Jul 18 22:52:02 Tex systemd[1318]: tracker-store.service: Succeeded.
Jul 18 22:52:03 Tex systemd[1]: blueman-mechanism.service: Succeeded.
Jul 18 22:52:03 Tex audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=blueman-mechanism comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:52:03 Tex kernel: audit: type=1131 audit(1595109123.363:140): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=blueman-mechanism comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:52:40 Tex acpid[789]: client connected from 1242[0:0]
Jul 18 22:52:40 Tex acpid[789]: 1 client rule loaded
Jul 18 22:52:40 Tex root[1155150]: ACPI group/action undefined: jack/lineout / LINEOUT
Jul 18 22:52:40 Tex root[1155152]: ACPI group/action undefined: jack/videoout / VIDEOOUT
Jul 18 22:52:40 Tex root[1155155]: ACPI group/action undefined: jack/lineout / LINEOUT
Jul 18 22:52:40 Tex root[1155157]: ACPI group/action undefined: jack/videoout / VIDEOOUT
Jul 18 22:52:40 Tex acpid[789]: client connected from 1242[0:0]
Jul 18 22:52:40 Tex acpid[789]: 1 client rule loaded
Jul 18 22:52:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: in0: +1.30 V (min = +2.26 V, max = +1.38 V) [ALARM]
Jul 18 22:52:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: in4: +0.03 V (min = +2.77 V, max = +2.78 V) [ALARM]
Jul 18 22:52:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: in6: +0.03 V (min = +2.60 V, max = +1.15 V) [ALARM]
Jul 18 22:52:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: 3VSB: +3.31 V (min = +4.84 V, max = +2.40 V) [ALARM]
Jul 18 22:52:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: CPU Temp: 48.0 C (min = 70.0 C, max = -98.0 C) [ALARM]
Jul 18 22:52:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: Chipset: 42.0 C (min = -3.0 C, max = -43.0 C) [ALARM]
Jul 18 22:52:47 Tex sensord[809]: Sensor alarm: Chip it8665-isa-0290: temp4: 42.0 C (min = -37.0 C, max = -4.0 C) [ALARM]
Jul 18 22:52:53 Tex dbus-daemon[795]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.4' (uid=0 pid=797 comm="/usr/bin/NetworkManager --no-daemon ")
Jul 18 22:52:53 Tex dbus-daemon[795]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.Last edited by Roken (2020-07-18 22:21:40)
Ryzen 5900X 12 core/24 thread - RTX 3090 FE 24 Gb, Asus B550-F Gaming MB, 128Gb Corsair DDR4, Fractal Design Define 7 XL, 5 HD (2 NvME PCI, 4SSD) + 1 x optical.
Linux user #545703
/ is the root of all problems.
Offline
#4 2020-07-19 05:42:30
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,687
Re: Random logout
Yup, but the coredump is rather shallow.
Are you sure this isn't a follow-up thing? Anything preceeding the dbus-daemon segfault? (I/O errors or so)
Offline
#5 2020-07-19 07:14:16
- Roken
- Member
- From: South Wales, UK
- Registered: 2012-01-16
- Posts: 1,366
Re: Random logout
Nothing that I can see.
This has more context for you (from 8 minutes before the logout)
Jul 18 22:41:17 Tex dbus-daemon[795]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.4' (uid=0 pid=797 comm="/usr/bin/NetworkManager --no-daemon ")
Jul 18 22:41:17 Tex dbus-daemon[795]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Jul 18 22:42:53 Tex dbus-daemon[795]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.4' (uid=0 pid=797 comm="/usr/bin/NetworkManager --no-daemon ")
Jul 18 22:42:53 Tex dbus-daemon[795]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Jul 18 22:46:17 Tex dbus-daemon[795]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.4' (uid=0 pid=797 comm="/usr/bin/NetworkManager --no-daemon ")
Jul 18 22:46:17 Tex dbus-daemon[795]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Jul 18 22:47:53 Tex dbus-daemon[795]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.4' (uid=0 pid=797 comm="/usr/bin/NetworkManager --no-daemon ")
Jul 18 22:47:53 Tex dbus-daemon[795]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Jul 18 22:47:55 Tex udisksd[1687]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/WDC_WD5000AADS_56S9B1_WD_WCAV9R041988: Error updating SMART data: sk_disk_smart_read_data: Operation not supported (udisks-error-quark, 0)
Jul 18 22:49:50 Tex audit[1343]: ANOM_ABEND auid=1000 uid=1000 gid=100 ses=2 pid=1343 comm="dbus-daemon" exe="/usr/bin/dbus-daemon" sig=11 res=1
Jul 18 22:49:50 Tex kernel: dbus-daemon[1343]: segfault at 960a ip 000000000000960a sp 00007fff480d0a78 error 14 in dbus-daemon[561c3bf79000+8000]
Jul 18 22:49:50 Tex kernel: Code: Bad RIP value.
Jul 18 22:49:50 Tex kernel: audit: type=1701 audit(1595108990.992:96): auid=1000 uid=1000 gid=100 ses=2 pid=1343 comm="dbus-daemon" exe="/usr/bin/dbus-daemon" sig=11 res=1
Jul 18 22:49:51 Tex systemd[1]: Created slice system-systemd\x2dcoredump.slice.
Jul 18 22:49:51 Tex audit: BPF prog-id=16 op=LOAD
Jul 18 22:49:51 Tex kernel: audit: type=1334 audit(1595108991.001:97): prog-id=16 op=LOAD
Jul 18 22:49:51 Tex audit: BPF prog-id=17 op=LOAD
Jul 18 22:49:51 Tex kernel: audit: type=1334 audit(1595108991.002:98): prog-id=17 op=LOAD
Jul 18 22:49:51 Tex systemd[1]: Started Process Core Dump (PID 1134674/UID 0).
Jul 18 22:49:51 Tex audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-1134674-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:49:51 Tex kernel: audit: type=1130 audit(1595108991.004:99): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-1134674-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:49:51 Tex gvfsd[2574]: A connection to the bus can't be made
Jul 18 22:49:51 Tex kernel: xfce4-session[1330]: segfault at 2c ip 000055b39a5f0a70 sp 00007fffcf25c898 error 4 in xfce4-session[55b39a5de000+19000]
Jul 18 22:49:51 Tex kernel: Code: 49 89 c4 67 e8 e1 58 ff ff 4d 85 e4 74 14 48 83 c4 08 4c 89 e7 5d 41 5c ff 25 14 7b 01 00 0f 1f 40 00 48 83 c4 08 5d 41 5c c3 <8b> 47 2c c3 66 66 2e 0f 1f 84 00 00 00 00 00 90 8b 47 28 c3 66 66
Jul 18 22:49:51 Tex kernel: audit: type=1701 audit(1595108991.285:100): auid=1000 uid=1000 gid=100 ses=1 pid=1330 comm="xfce4-session" exe="/usr/bin/xfce4-session" sig=11 res=1
Jul 18 22:49:51 Tex kernel: audit: type=1334 audit(1595108991.302:101): prog-id=18 op=LOAD
Jul 18 22:49:51 Tex kernel: audit: type=1334 audit(1595108991.302:102): prog-id=19 op=LOAD
Jul 18 22:49:51 Tex kernel: audit: type=1130 audit(1595108991.304:103): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@1-1134680-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:49:51 Tex audit[1330]: ANOM_ABEND auid=1000 uid=1000 gid=100 ses=1 pid=1330 comm="xfce4-session" exe="/usr/bin/xfce4-session" sig=11 res=1
Jul 18 22:49:51 Tex audit: BPF prog-id=18 op=LOAD
Jul 18 22:49:51 Tex audit: BPF prog-id=19 op=LOAD
Jul 18 22:49:51 Tex audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@1-1134680-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:49:51 Tex audit[6414]: ANOM_ABEND auid=1000 uid=1000 gid=100 ses=1 pid=6414 comm="conky" exe="/usr/bin/conky" sig=6 res=1
Jul 18 22:49:51 Tex audit: BPF prog-id=20 op=LOAD
Jul 18 22:49:51 Tex audit: BPF prog-id=21 op=LOAD
Jul 18 22:49:51 Tex audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@2-1134689-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:49:51 Tex gvfsd[3049]: A connection to the bus can't be made
Jul 18 22:49:51 Tex polkitd[1401]: Unregistered Authentication Agent for unix-session:1 (system bus name :1.77, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_GB.utf8) (disconnected from bus)
Jul 18 22:49:51 Tex xfce4-notifyd[1878]: Another notification daemon is running, exiting
Jul 18 22:49:51 Tex unknown[1394]: Name org.xfce.Xfconf lost on the message dbus, exiting.
Jul 18 22:49:51 Tex gvfsd[1364]: A connection to the bus can't be made
Jul 18 22:49:51 Tex systemd[1318]: gvfs-gphoto2-volume-monitor.service: Succeeded.
Jul 18 22:49:51 Tex systemd[1318]: gvfs-mtp-volume-monitor.service: Succeeded.
Jul 18 22:49:51 Tex systemd[1]: run-user-1000-gvfs.mount: Succeeded.
Jul 18 22:49:51 Tex systemd[1318]: run-user-1000-gvfs.mount: Succeeded.
Jul 18 22:49:51 Tex systemd[1318]: dbus.service: Main process exited, code=dumped, status=11/SEGV
Jul 18 22:49:51 Tex systemd[1318]: dbus.service: Failed with result 'core-dump'.
Jul 18 22:49:51 Tex systemd[1]: Started Process Core Dump (PID 1134680/UID 0).
Jul 18 22:49:51 Tex systemd[1]: Started Process Core Dump (PID 1134689/UID 0).
Jul 18 22:49:51 Tex systemd-coredump[1134675]: Process 1343 (dbus-daemon) of user 1000 dumped core.
Jul 18 22:49:51 Tex systemd[1]: systemd-coredump@0-1134674-0.service: Succeeded.
Jul 18 22:49:51 Tex audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-1134674-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:49:51 Tex audit: BPF prog-id=17 op=UNLOAD
Jul 18 22:49:51 Tex audit: BPF prog-id=16 op=UNLOAD
Jul 18 22:49:51 Tex pulseaudio[1439]: ICE default IO error handler doing an exit(), pid = 1439, errno = 11
Jul 18 22:49:51 Tex audit[1315]: USER_END pid=1315 uid=0 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env,pam_gnome_keyring acct="steve" exe="/usr/lib/lxdm/lxdm-session" hostname=Tex addr=? terminal=tty1 res=success'
Jul 18 22:49:51 Tex lxdm-session[1315]: pam_unix(lxdm:session): session closed for user steve
Jul 18 22:49:51 Tex bluetoothd[792]: Endpoint unregistered: sender=:1.50 path=/MediaEndpoint/A2DPSink/sbc
Jul 18 22:49:51 Tex bluetoothd[792]: Endpoint unregistered: sender=:1.50 path=/MediaEndpoint/A2DPSource/sbc
Jul 18 22:49:51 Tex systemd-coredump[1134690]: Process 6414 (conky) of user 1000 dumped core.
Jul 18 22:49:51 Tex systemd[1]: systemd-coredump@2-1134689-0.service: Succeeded.
Jul 18 22:49:51 Tex audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@2-1134689-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:49:51 Tex audit: BPF prog-id=21 op=UNLOAD
Jul 18 22:49:51 Tex audit: BPF prog-id=20 op=UNLOAD
Jul 18 22:49:51 Tex systemd-logind[800]: Session 1 logged out. Waiting for processes to exit.
Jul 18 22:49:51 Tex python[2254]: The X11 connection broke (error 1). Did the X11 server die?
Jul 18 22:49:52 Tex systemd-coredump[1134685]: Process 1330 (xfce4-session) of user 1000 dumped core.
Jul 18 22:49:52 Tex audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@1-1134680-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 18 22:49:52 Tex systemd[1]: systemd-coredump@1-1134680-0.service: Succeeded.
Jul 18 22:49:52 Tex audit: BPF prog-id=19 op=UNLOAD
Jul 18 22:49:52 Tex audit: BPF prog-id=18 op=UNLOADThere are a bunch of sensord alarms filtered out (nothing untoward, just misconfigured alarms out of the box, that I should get around to fixing).
Ryzen 5900X 12 core/24 thread - RTX 3090 FE 24 Gb, Asus B550-F Gaming MB, 128Gb Corsair DDR4, Fractal Design Define 7 XL, 5 HD (2 NvME PCI, 4SSD) + 1 x optical.
Linux user #545703
/ is the root of all problems.
Offline
#6 2020-07-19 11:57:02
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,687
Re: Random logout
Yeah no - it really crashes right out of the blue.
Do the crashes in other journal sections look the same?
If there's no clear pattern, you shoud run memtest, https://wiki.archlinux.org/index.php/St … ing_memory but if it's always the same (dbus-daemon, similar pointer) there's probably just a bug in the daemon (weird, though)
Offline
#7 2020-07-20 18:28:40
- Roken
- Member
- From: South Wales, UK
- Registered: 2012-01-16
- Posts: 1,366
Re: Random logout
I'll try a memtest run overnight (to give it a fighting chance).
I went with a full migration to the nvme, so if it's a software fault, it should persist. I suppose it's not inconceivable that there's a SSD fault, in which case, migrating should fix it.
The problem is the unpredictable nature of the problem 
Ryzen 5900X 12 core/24 thread - RTX 3090 FE 24 Gb, Asus B550-F Gaming MB, 128Gb Corsair DDR4, Fractal Design Define 7 XL, 5 HD (2 NvME PCI, 4SSD) + 1 x optical.
Linux user #545703
/ is the root of all problems.
Offline
#8 2020-07-20 23:10:48
- Roken
- Member
- From: South Wales, UK
- Registered: 2012-01-16
- Posts: 1,366
Re: Random logout
And, of course, I managed to screw things up completely, so I have been forced into a fresh install (yes, very much a user error). Fortunately, I had sufficient /etc file backed up to get me going, and /home is safely away on a separate drive, with a complete package list on an NFS drive, so I'm almost back to a working system (well, it IS working, but I'll need to do some configuring).
On the plus side, if my problem goes away it's a software problem. If it doesn't, it's either something in /home or a hardware problem. I'm hoping for the former.
Thank you for your help, and I'm sorry I was dumb enough to trash my system before exploring reasons further.
On the positive, 1,406 packages that I don't have to wade through to install again manually.
Ryzen 5900X 12 core/24 thread - RTX 3090 FE 24 Gb, Asus B550-F Gaming MB, 128Gb Corsair DDR4, Fractal Design Define 7 XL, 5 HD (2 NvME PCI, 4SSD) + 1 x optical.
Linux user #545703
/ is the root of all problems.
Offline
Pages: 1