You are not logged in.
Hello Guys, im having an annoying problem since today.
I Have.
Nvidia 780 TI
Kingston Technology HyperX Virtual Surround Sound ( Headset )
and from today a Sentey MS-2401.
On the last setup the old monitor was using DVI port from the video card, and the all the audio was working OK, but since i installed the new monitor and started using the Display Port from the graphic card i cant use the mic from the headset, i tried several combinations with pulse audio but nothing happens, also i did a lot of research but there is no info about this setup.
My modules-
~ ❯ lsmod|grep snd ✔
snd_hda_codec_realtek 135168 1
snd_hda_codec_generic 98304 1 snd_hda_codec_realtek
ledtrig_audio 16384 2 snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_hdmi 73728 1
snd_usb_audio 311296 4
snd_hda_intel 53248 4
snd_intel_dspcfg 28672 1 snd_hda_intel
snd_usbmidi_lib 40960 1 snd_usb_audio
snd_hda_codec 167936 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
snd_rawmidi 45056 1 snd_usbmidi_lib
snd_seq_device 16384 1 snd_rawmidi
mc 61440 1 snd_usb_audio
snd_hda_core 106496 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
snd_hwdep 16384 2 snd_usb_audio,snd_hda_codec
snd_pcm 147456 7 snd_hda_codec_hdmi,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_hda_core
snd_timer 45056 1 snd_pcm
snd 114688 26 snd_hda_codec_generic,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_usb_audio,snd_usbmidi_lib,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm,snd_rawmidi
soundcore 16384 1 snd
My audio cards.
~ ❯ lspci| grep -i audio 0|1 ↵
00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio
01:00.1 Audio device: NVIDIA Corporation GK110 High Definition Audio Controller (rev a1)
My Headset definition.
~ ❯ lsusb | grep -i hyper ✔
Bus 001 Device 002: ID 0951:16a4 Kingston Technology HyperX Virtual Surround Sound
Full cards.
[root@Tesla ~]# cat /proc/asound/cards
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xdf240000 irq 137
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xdf080000 irq 17
2 [Sound ]: USB-Audio - HyperX Virtual Surround Sound
Kingston HyperX Virtual Surround Sound at usb-0000:00:14.0-13, full speed}
I tried removing the nvidia audio but nothing happened.
[root@Tesla ~]# lspci | grep -i audio
00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio
01:00.1 Audio device: NVIDIA Corporation GK110 High Definition Audio Controller (rev a1)
[root@Tesla ~]# find /sys/devices -name *01:00.1
/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1
[root@Tesla ~]# echo 1 > /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1/remove
Some idea ?, im thinking on buy an hdmi wire, and not to use the display port, but maybe there is some config issue.
Thanks in advance!.
Offline