You are not logged in.
Pages: 1
I have pulseaudio set up and I get audio out of the front headphone jack on my pc, but something is wrong with the back headphone jacks. I have 3 rear headphone jacks on the back of my pc, one of them might be a mic jack but I'm not sure. When I use pavucontrol and set the output device to Line out my ALSA Mixer looks like this:
If I set the output device to headphones in pavucontrol, my ALSA Mixer looks like:
other ports with headphones on
with Line out selected
I suspect really don't know what could cause this, it's also kind of strange that all the ports are enabled at the same time when line out is selected, like pulseaudio is identifying them all as a surround sound system. The problem persists through ALSA, if pulseaudio is off I can still get audio from my headphone jack and not the rear ports. Any help is appreciated, I think I had a similar problem on Ubuntu and solved it but haven't been able to find the forum post I used.
edit: adding list-sinks in case theres something I'm missing something
2 sink(s) available.
index: 0
name: <alsa_output.pci-0000_0b_00.1.hdmi-stereo-extra1>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9030
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
card: 0 <alsa_card.pci-0000_0b_00.1>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 1"
alsa.id = "HDMI 1"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "7"
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xfd080000 irq 52"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:0b:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "10f1"
device.product.name = "GP106 High Definition Audio Controller"
device.string = "hdmi:0,1"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo-extra1"
device.profile.description = "Digital Stereo (HDMI 2)"
device.description = "GP106 High Definition Audio Controller Digital Stereo (HDMI 2)"
alsa.mixer_name = "Nvidia GPU 84 HDMI/DP"
alsa.components = "HDA:10de0084,19da1438,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: yes)
properties:
device.icon_name = "video-display"
device.product.name = "BenQ GW2760HS"
active port: <hdmi-output-1>
* index: 1
name: <alsa_output.pci-0000_12_00.3.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9039
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 2
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 100.14 ms
card: 2 <alsa_card.pci-0000_12_00.3>
module: 8
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC892 Analog"
alsa.id = "ALC892 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfd900000 irq 54"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:12:00.3"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:12:00.3/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "1457"
device.product.name = "Family 17h (Models 00h-0fh) HD Audio Controller"
device.string = "front:1"
device.buffering.buffer_size = "17664"
device.buffering.fragment_size = "2944"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Family 17h (Models 00h-0fh) HD Audio Controller Analog Stereo"
alsa.mixer_name = "Realtek ALC892"
alsa.components = "HDA:10ec0892,18496893,00100302"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: yes)
properties:
analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-lineout>moderator edit -- replaced oversized images with links.
Pasting pictures and code
Edit: I've been running speaker-test on each output using speaker-test -D default:Generic -c # through each output, and all the generic outputs seem to run through my headphones
aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
samplerate
Rate Converter Plugin Using Samplerate Library
speexrate
Rate Converter Plugin Using Speex Resampler
jack
JACK Audio Connection Kit
oss
Open Sound System
pulse
PulseAudio Sound Server
speex
Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
Plugin for channel upmix (4,6,8)
vdownmix
Plugin for channel downmix (stereo) with a simple spacialization
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
HDA NVidia, HDMI 1
HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
HDA NVidia, HDMI 2
HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
HDA NVidia, HDMI 3
HDMI Audio Output
hdmi:CARD=NVidia,DEV=4
HDA NVidia, HDMI 4
HDMI Audio Output
hdmi:CARD=NVidia,DEV=5
HDA NVidia, HDMI 5
HDMI Audio Output
hdmi:CARD=NVidia,DEV=6
HDA NVidia, HDMI 6
HDMI Audio Output
usbstream:CARD=NVidia
HDA NVidia
USB Stream Output
default:CARD=Generic
HD-Audio Generic, ALC892 Analog
Default Audio Device
sysdefault:CARD=Generic
HD-Audio Generic, ALC892 Analog
Default Audio Device
front:CARD=Generic,DEV=0
HD-Audio Generic, ALC892 Analog
Front output / input
surround21:CARD=Generic,DEV=0
HD-Audio Generic, ALC892 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Generic,DEV=0
HD-Audio Generic, ALC892 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic,DEV=0
HD-Audio Generic, ALC892 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic,DEV=0
HD-Audio Generic, ALC892 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic,DEV=0
HD-Audio Generic, ALC892 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic,DEV=0
HD-Audio Generic, ALC892 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
usbstream:CARD=Generic
HD-Audio Generic
USB Stream Output
usbstream:CARD=U0x46d0x8ad
USB Device 0x46d:0x8ad
USB Stream Outputalso aplay -l | grep :CARD
hdmi:CARD=NVidia,DEV=0
hdmi:CARD=NVidia,DEV=1
hdmi:CARD=NVidia,DEV=2
hdmi:CARD=NVidia,DEV=3
hdmi:CARD=NVidia,DEV=4
hdmi:CARD=NVidia,DEV=5
hdmi:CARD=NVidia,DEV=6
usbstream:CARD=NVidia
default:CARD=Generic
sysdefault:CARD=Generic
front:CARD=Generic,DEV=0
surround21:CARD=Generic,DEV=0
surround40:CARD=Generic,DEV=0
surround41:CARD=Generic,DEV=0
surround50:CARD=Generic,DEV=0
surround51:CARD=Generic,DEV=0
surround71:CARD=Generic,DEV=0
usbstream:CARD=Generic
usbstream:CARD=U0x46d0x8adI thought it might be a problem that the ids are all dev = 0, but the example has the same set up
I also noticed that this topic seems similar, however the issue isn't with the outputs not showing up
Last edited by m9p909 (2020-08-14 14:51:33)
Offline
Pages: 1