You are not logged in.
- Topics: Active | Unanswered
#1 2020-08-13 21:19:16
- VDmvKcW9JamBSir5fNfehqpG
- Member
- From: Earth
- Registered: 2019-12-30
- Posts: 63
New system freezing issue, but not sure if it's hardware or software
Specs if it's relevant:
CPU: Intel Core i7-740QM
RAM: 8 GB
GPU: Quadro FX 1800M running the nvidia-340xx-dkms driver from the AUR
Internal display: 1920x1080 60Hz on eDP
External display: 1440x900 75Hz on VGA
Storage: 240 GB SATA SSD
Environment: i3wm with Picom on Xorg
So far, I've experienced three complete system freezes in the past few weeks or so, which I have been unable to reproduce consistently. In all cases, first the screen(s) froze and the audio stopped, then eventually the hard drive LED stopped blinking, and up to 30 seconds later the Wi-Fi LED stopped blinking, one time being on forever, one time being off forever, and one time being on for a few minutes and then turning off. The system is unresponsive to switching to the console and typing commands blind, and is unresponsive to magic sysrq (which is enabled), so it can only be recovered by holding the power button until the power is cut, and a reboot triggers an fsck. This happened all the time on Nouveau for no reason, but only recently started happening at all on the proprietary driver. All three freezes happened in different situations:
1. Right at the moment when I was switching Minecraft from full screen to windowed mode, after the window borders had been drawn, but before Minecraft adjusted itself for the new size.
2. When I was opening GIMP and carrying my laptop at the same time. No GIMP window had opened yet, but the screen got covered in a repeating pattern of pink and green rectangles, with seemingly random rows of pixels flickering or shifted to the right, but leaving most of the content still visible.
3. Today, I tried to wake my laptop from sleep, and the freeze happened after the fan spun up and the wi-fi LED started blinking, but before the screen backlight came on. This time, the first few times I tried to reboot, I got backlight but no video at all, not even in the BIOS.
I do not think a system update triggered it, but I may have not noticed a package upgrade. I'm pretty sure this is associated with my GPU because it seems to be "triggered" by GPU related actions (new/changed windows, bringing up a display) and my GPU has been the source of pretty much all of my Linux problems. The fact that my GPU has had compatibility problems for a while and Nvidia GPUs have had compatibility issues historically makes me think that this might be a weird software issue that appeared, but I think that it may also be a hardware issue because of no video in the BIOS after a reboot, and I feel like it would be really difficult for a driver to break that.
I've found nothing that appears relevant in my Xorg logs, except for many occurrences of stuff like this, which has been happening for at least as long as I've been using Arch and predates this problem:
[ 32793.526] (EE) client bug: timer event17 trackpoint: scheduled expiry is in the past (-28ms), your system is too slow
[ 32793.527] (EE) client bug: timer event17 trackpoint: scheduled expiry is in the past (-19ms), your system is too slow
[ 32853.007] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-0ms), your system is too slow
[ 35742.748] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-6ms), your system is too slow
[ 35867.652] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-2ms), your system is too slow
[ 38526.023] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-7ms), your system is too slow
[ 48277.460] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-11ms), your system is too slowI have also seen groups of permission denied errors and "Failed to initiate the GLX module" errors like these, but they appear to be less common and only appear in Xorg.1.log and Xorg.2.log. (Which I have no idea why I even have.)
[200613.444] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[200613.445] (II) xfree86: Adding drm device (/dev/dri/card0)
[200613.445] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied[201742.375] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[201742.376] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[201742.376] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[201742.376] (EE) NVIDIA(0): you continue to encounter problems, Please try
[201742.376] (EE) NVIDIA(0): reinstalling the NVIDIA driver.The only thing seeming off to me is that Xorg.0.log.old does not end with "Server terminated successfully (0). Closing log file.", which suggests to me that the server crashed. Xorg.0.log also does not end with that line, but I think that's the log for my running X server. Xorg.1.log and Xorg.2.log end with that line, suggesting that those unexplained servers with permission and GLX errors did not crash. I do not have Xorg.1.log.old or Xorg.2.log.old.
I also looked at the output of sudo journalctl -k -b-1, but from my limited knowledge of kernel logs, it looks like it just went to sleep and then recorded nothing. I couldn't find a pastebin site that would take the whole thing, so here are the last couple lines: https://pastebin.com/raw/4sZGjd5e.
And here's Xorg.0.log.old: https://pastebin.com/raw/s6NLu7D0
Do I need to look at any more logs, or do I need to enable some services to determine what exactly is going wrong? And is there any way to make it so a GPU error does not bring down the entire system and instead does something reasonable like reinitializing the GPU?
Offline
#2 2020-08-18 19:56:12
- VDmvKcW9JamBSir5fNfehqpG
- Member
- From: Earth
- Registered: 2019-12-30
- Posts: 63
Re: New system freezing issue, but not sure if it's hardware or software
It just happened again, once again after trying to wake up from sleep. This time, the power LED started glowing solid instead of blinking, but none of the other LEDs came on, the optical drive didn't check for a disc, and the fan didn't spin up. The system rebooted first try.
Here's my Xorg.0.log.old:
[ 36.088]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[ 36.088] Build Operating System: Linux Arch Linux
[ 36.088] Current Operating System: Linux arch-btw 5.7.12-arch1-1 #1 SMP PREEMPT Fri, 31 Jul 2020 17:38:22 +0000 x86_64
[ 36.088] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/ArchInstall-root rw loglevel=3 root=/dev/ArchInstall/root cryptdevice=/dev/sda2:main:allow-discards zswap.enabled=1 quiet noht resume=/dev/ArchInstall/swap
[ 36.088] Build Date: 31 July 2020 04:00:57PM
[ 36.088]
[ 36.088] Current version of pixman: 0.40.0
[ 36.088] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 36.088] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 36.089] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 13 12:50:24 2020
[ 36.100] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 36.100] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 36.102] (==) No Layout section. Using the first Screen section.
[ 36.102] (==) No screen section available. Using defaults.
[ 36.102] (**) |-->Screen "Default Screen Section" (0)
[ 36.102] (**) | |-->Monitor "<default monitor>"
[ 36.102] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 36.102] (**) | |-->Device "Device0"
[ 36.102] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 36.102] (==) Automatically adding devices
[ 36.102] (==) Automatically enabling devices
[ 36.102] (==) Automatically adding GPU devices
[ 36.102] (==) Automatically binding GPU devices
[ 36.102] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 36.113] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 36.113] Entry deleted from font path.
[ 36.114] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 36.114] Entry deleted from font path.
[ 36.116] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 36.116] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 36.116] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 36.116] (II) Module ABI versions:
[ 36.116] X.Org ANSI C Emulation: 0.4
[ 36.116] X.Org Video Driver: 24.1
[ 36.116] X.Org XInput driver : 24.1
[ 36.116] X.Org Server Extension : 10.0
[ 36.117] (++) using VT number 7
[ 36.117] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 36.118] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 36.124] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 36.124] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[ 36.129] (--) PCI:*(1@0:0:0) 10de:0cbc:1028:040c rev 162, Mem @ 0xe2000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x00007000/128, BIOS @ 0x????????/131072
[ 36.129] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 36.129] (II) LoadModule: "glx"
[ 36.131] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[ 36.571] (II) Module glx: vendor="NVIDIA Corporation"
[ 36.571] compiled for 4.0.2, module version = 1.0.0
[ 36.571] Module class: X.Org Server Extension
[ 36.574] (II) NVIDIA GLX Module 340.108 Wed Dec 11 14:26:50 PST 2019
[ 36.577] (II) LoadModule: "nvidia"
[ 36.585] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 36.622] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 36.622] compiled for 4.0.2, module version = 1.0.0
[ 36.622] Module class: X.Org Video Driver
[ 36.624] (II) NVIDIA dlloader X Driver 340.108 Wed Dec 11 14:06:00 PST 2019
[ 36.624] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 36.683] (II) Loading sub module "fb"
[ 36.683] (II) LoadModule: "fb"
[ 36.685] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 36.688] (II) Module fb: vendor="X.Org Foundation"
[ 36.688] compiled for 1.20.8, module version = 1.0.0
[ 36.688] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.688] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 36.688] (II) Loading sub module "wfb"
[ 36.688] (II) LoadModule: "wfb"
[ 36.690] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 36.693] (II) Module wfb: vendor="X.Org Foundation"
[ 36.693] compiled for 1.20.8, module version = 1.0.0
[ 36.693] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.693] (II) Loading sub module "ramdac"
[ 36.693] (II) LoadModule: "ramdac"
[ 36.693] (II) Module "ramdac" already built-in
[ 36.701] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 36.701] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 36.701] (==) NVIDIA(0): RGB weight 888
[ 36.701] (==) NVIDIA(0): Default visual is TrueColor
[ 36.702] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 36.703] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 36.703] (**) NVIDIA(0): Option "NoLogo" "1"
[ 36.703] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 36.703] (**) NVIDIA(0): Option "Coolbits" "13"
[ 36.703] (**) NVIDIA(0): Enabling 2D acceleration
[ 37.780] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 37.784] (II) NVIDIA(0): NVIDIA GPU Quadro FX 1800M (GT215GL) at PCI:1:0:0 (GPU-0)
[ 37.784] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 37.784] (--) NVIDIA(0): VideoBIOS: 70.15.41.01.04
[ 37.784] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 38.014] (II) NVIDIA(GPU-0): Display (LGD (DFP-3)) does not support NVIDIA 3D Vision
[ 38.014] (II) NVIDIA(GPU-0): stereo.
[ 38.015] (--) NVIDIA(0): Valid display device(s) on Quadro FX 1800M at PCI:1:0:0
[ 38.015] (--) NVIDIA(0): CRT-0
[ 38.015] (--) NVIDIA(0): DFP-0
[ 38.015] (--) NVIDIA(0): DFP-1
[ 38.015] (--) NVIDIA(0): DFP-2
[ 38.015] (--) NVIDIA(0): LGD (DFP-3) (boot, connected)
[ 38.015] (--) NVIDIA(0): DFP-4
[ 38.015] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 38.015] (--) NVIDIA(0): DFP-0: Internal TMDS
[ 38.015] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[ 38.015] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 38.015] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 38.015] (--) NVIDIA(0): DFP-2: Internal DisplayPort
[ 38.015] (--) NVIDIA(GPU-0): DFP-2: 480.0 MHz maximum pixel clock
[ 38.015] (--) NVIDIA(0): LGD (DFP-3): Internal DisplayPort
[ 38.015] (--) NVIDIA(GPU-0): LGD (DFP-3): 480.0 MHz maximum pixel clock
[ 38.015] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 38.015] (--) NVIDIA(GPU-0): DFP-4: 480.0 MHz maximum pixel clock
[ 38.015] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 38.015] (**) NVIDIA(0): device LGD (DFP-3) (Using EDID frequencies has been
[ 38.015] (**) NVIDIA(0): enabled on all display devices.)
[ 39.055] (==) NVIDIA(0):
[ 39.055] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 39.055] (==) NVIDIA(0): will be used as the requested mode.
[ 39.055] (==) NVIDIA(0):
[ 39.055] (II) NVIDIA(0): Validated MetaModes:
[ 39.055] (II) NVIDIA(0): "DFP-3:nvidia-auto-select"
[ 39.055] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 39.063] (--) NVIDIA(0): DPI set to (143, 144); computed from "UseEdidDpi" X config
[ 39.063] (--) NVIDIA(0): option
[ 39.064] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 39.070] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 39.070] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 39.070] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 39.070] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 39.070] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 39.070] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 39.070] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 39.070] (II) NVIDIA(0): Config Options in the README.
[ 39.098] (II) NVIDIA(0): Setting mode "DFP-3:nvidia-auto-select"
[ 39.315] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 39.315] (==) NVIDIA(0): Backing store enabled
[ 39.315] (==) NVIDIA(0): Silken mouse disabled
[ 39.315] (==) NVIDIA(0): DPMS enabled
[ 39.316] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 39.316] (II) Loading sub module "dri2"
[ 39.316] (II) LoadModule: "dri2"
[ 39.316] (II) Module "dri2" already built-in
[ 39.316] (II) NVIDIA(0): [DRI2] Setup complete
[ 39.316] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 39.322] (II) Initializing extension Generic Event Extension
[ 39.323] (II) Initializing extension SHAPE
[ 39.323] (II) Initializing extension MIT-SHM
[ 39.323] (II) Initializing extension XInputExtension
[ 39.324] (II) Initializing extension XTEST
[ 39.324] (II) Initializing extension BIG-REQUESTS
[ 39.324] (II) Initializing extension SYNC
[ 39.325] (II) Initializing extension XKEYBOARD
[ 39.329] (II) Initializing extension XC-MISC
[ 39.329] (II) Initializing extension SECURITY
[ 39.329] (II) Initializing extension XFIXES
[ 39.329] (II) Initializing extension RENDER
[ 39.330] (II) Initializing extension RANDR
[ 39.330] (II) Initializing extension COMPOSITE
[ 39.331] (II) Initializing extension DAMAGE
[ 39.331] (II) Initializing extension MIT-SCREEN-SAVER
[ 39.331] (II) Initializing extension DOUBLE-BUFFER
[ 39.332] (II) Initializing extension RECORD
[ 39.332] (II) Initializing extension DPMS
[ 39.332] (II) Initializing extension Present
[ 39.332] (II) Initializing extension DRI3
[ 39.333] (II) Initializing extension X-Resource
[ 39.333] (II) Initializing extension XVideo
[ 39.333] (II) Initializing extension XVideo-MotionCompensation
[ 39.333] (II) Initializing extension XFree86-VidModeExtension
[ 39.333] (II) Initializing extension XFree86-DGA
[ 39.334] (II) Initializing extension XFree86-DRI
[ 39.334] (II) Initializing extension DRI2
[ 39.334] (II) Initializing extension GLX
[ 39.334] (II) Initializing extension GLX
[ 39.334] (II) Indirect GLX disabled.(II) Initializing extension NV-GLX
[ 39.335] (II) Initializing extension NV-CONTROL
[ 39.335] (II) Initializing extension XINERAMA
[ 39.652] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 39.652] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 39.652] (II) LoadModule: "libinput"
[ 39.653] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 39.667] (II) Module libinput: vendor="X.Org Foundation"
[ 39.667] compiled for 1.20.8, module version = 0.30.0
[ 39.667] Module class: X.Org XInput Driver
[ 39.667] ABI class: X.Org XInput driver, version 24.1
[ 39.667] (II) Using input driver 'libinput' for 'Power Button'
[ 39.667] (**) Power Button: always reports core events
[ 39.667] (**) Option "Device" "/dev/input/event3"
[ 39.669] (**) Option "_source" "server/udev"
[ 39.697] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 39.697] (II) event3 - Power Button: device is a keyboard
[ 39.698] (II) event3 - Power Button: device removed
[ 39.734] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 39.735] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 39.738] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 39.739] (II) event3 - Power Button: device is a keyboard
[ 39.741] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 39.742] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 39.742] (II) Using input driver 'libinput' for 'Video Bus'
[ 39.742] (**) Video Bus: always reports core events
[ 39.742] (**) Option "Device" "/dev/input/event4"
[ 39.742] (**) Option "_source" "server/udev"
[ 39.747] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 39.747] (II) event4 - Video Bus: device is a keyboard
[ 39.748] (II) event4 - Video Bus: device removed
[ 39.801] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/LNXVIDEO:01/input/input4/event4"
[ 39.801] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 39.807] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 39.807] (II) event4 - Video Bus: device is a keyboard
[ 39.810] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 39.810] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 39.810] (II) Using input driver 'libinput' for 'Power Button'
[ 39.810] (**) Power Button: always reports core events
[ 39.810] (**) Option "Device" "/dev/input/event1"
[ 39.810] (**) Option "_source" "server/udev"
[ 39.814] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 39.814] (II) event1 - Power Button: device is a keyboard
[ 39.814] (II) event1 - Power Button: device removed
[ 39.841] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 39.841] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 39.844] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 39.844] (II) event1 - Power Button: device is a keyboard
[ 39.846] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 39.846] (II) No input driver specified, ignoring this device.
[ 39.846] (II) This device may have been added with another device file.
[ 39.850] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 39.850] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 39.850] (II) Using input driver 'libinput' for 'Sleep Button'
[ 39.850] (**) Sleep Button: always reports core events
[ 39.850] (**) Option "Device" "/dev/input/event2"
[ 39.850] (**) Option "_source" "server/udev"
[ 39.854] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 39.854] (II) event2 - Sleep Button: device is a keyboard
[ 39.855] (II) event2 - Sleep Button: device removed
[ 39.874] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 39.874] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 39.878] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 39.879] (II) event2 - Sleep Button: device is a keyboard
[ 39.881] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event8)
[ 39.881] (II) No input driver specified, ignoring this device.
[ 39.881] (II) This device may have been added with another device file.
[ 39.883] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event9)
[ 39.883] (II) No input driver specified, ignoring this device.
[ 39.883] (II) This device may have been added with another device file.
[ 39.885] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event6)
[ 39.885] (II) No input driver specified, ignoring this device.
[ 39.885] (II) This device may have been added with another device file.
[ 39.886] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event7)
[ 39.887] (II) No input driver specified, ignoring this device.
[ 39.887] (II) This device may have been added with another device file.
[ 39.888] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 39.888] (II) No input driver specified, ignoring this device.
[ 39.888] (II) This device may have been added with another device file.
[ 39.890] (II) config/udev: Adding input device HDA Intel MID Dock Mic (/dev/input/event11)
[ 39.890] (II) No input driver specified, ignoring this device.
[ 39.890] (II) This device may have been added with another device file.
[ 39.892] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event12)
[ 39.892] (II) No input driver specified, ignoring this device.
[ 39.892] (II) This device may have been added with another device file.
[ 39.893] (II) config/udev: Adding input device HDA Intel MID Dock Line Out (/dev/input/event13)
[ 39.893] (II) No input driver specified, ignoring this device.
[ 39.893] (II) This device may have been added with another device file.
[ 39.895] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event14)
[ 39.895] (II) No input driver specified, ignoring this device.
[ 39.895] (II) This device may have been added with another device file.
[ 39.897] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event15)
[ 39.898] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 39.898] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[ 39.898] (**) Dell WMI hotkeys: always reports core events
[ 39.898] (**) Option "Device" "/dev/input/event15"
[ 39.898] (**) Option "_source" "server/udev"
[ 39.904] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 39.904] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 39.905] (II) event15 - Dell WMI hotkeys: device removed
[ 39.961] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input17/event15"
[ 39.961] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 10)
[ 39.967] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 39.968] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 39.971] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[ 39.971] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 39.971] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 39.971] (**) AT Translated Set 2 keyboard: always reports core events
[ 39.971] (**) Option "Device" "/dev/input/event5"
[ 39.972] (**) Option "_source" "server/udev"
[ 39.976] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 39.977] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 39.979] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 40.028] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[ 40.028] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 40.033] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 40.034] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 40.038] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/event16)
[ 40.038] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "libinput pointer catchall"
[ 40.038] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS DualPoint Stick'
[ 40.038] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[ 40.038] (**) Option "Device" "/dev/input/event16"
[ 40.038] (**) Option "_source" "server/udev"
[ 40.043] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 40.044] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 40.047] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 40.095] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input18/event16"
[ 40.095] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint Stick" (type: MOUSE, id 12)
[ 40.095] (**) Option "AccelerationScheme" "none"
[ 40.095] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) selected scheme none/0
[ 40.095] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration factor: 2.000
[ 40.095] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration threshold: 4
[ 40.097] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 40.097] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 40.099] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/mouse0)
[ 40.099] (II) No input driver specified, ignoring this device.
[ 40.099] (II) This device may have been added with another device file.
[ 40.099] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event17)
[ 40.099] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "libinput touchpad catchall"
[ 40.099] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[ 40.099] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 40.099] (**) Option "Device" "/dev/input/event17"
[ 40.099] (**) Option "_source" "server/udev"
[ 40.101] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 40.102] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 40.103] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 40.103] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 40.162] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event17"
[ 40.162] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 13)
[ 40.164] (**) Option "AccelerationScheme" "none"
[ 40.164] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) selected scheme none/0
[ 40.165] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[ 40.165] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[ 40.169] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 40.171] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 40.175] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 40.178] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse1)
[ 40.178] (II) No input driver specified, ignoring this device.
[ 40.178] (II) This device may have been added with another device file.
[ 258.597] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 258.597] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 258.597] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 258.597] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 258.597] (**) NVIDIA(0): has been enabled on all display devices.)
[ 259.877] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 259.877] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 260.635] (II) NVIDIA(0): Setting mode "VGA-0: nvidia-auto-select @1440x900 +90+0 {ViewPortIn=1440x900, ViewPortOut=1440x900+0+0}"
[ 261.023] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+900 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, VGA-0: nvidia-auto-select @1440x900 +90+0 {ViewPortIn=1440x900, ViewPortOut=1440x900+0+0}"
[ 263.299] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 263.299] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 279.966] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 279.966] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 386.510] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 386.510] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 429.713] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 429.713] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 493.588] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 493.588] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 500.039] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 500.735] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 525.445] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 525.445] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 532.264] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 532.264] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 552.999] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 552.999] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 563.820] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 563.820] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 587.004] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 587.004] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 673.186] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 673.186] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 786.787] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 786.787] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 794.469] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 794.469] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 1186.872] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 1186.872] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 2397.965] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 2397.965] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 2559.220] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 2559.220] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 4228.059] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-0ms), your system is too slow
[ 5385.184] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 5385.184] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 5387.398] (II) event3 - Power Button: device removed
[ 5387.416] (II) event4 - Video Bus: device removed
[ 5387.462] (II) event1 - Power Button: device removed
[ 5387.481] (II) event2 - Sleep Button: device removed
[ 5387.498] (II) event15 - Dell WMI hotkeys: device removed
[ 5387.541] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 5387.558] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 5387.596] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 5391.468] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+900 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, VGA-0: nvidia-auto-select @1440x900 +90+0 {ViewPortIn=1440x900, ViewPortOut=1440x900+0+0}"
[ 5392.875] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 5392.875] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 5392.875] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 5392.875] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 5392.875] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 5392.875] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 5392.875] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 5392.875] (II) NVIDIA(0): Config Options in the README.
[ 5392.907] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 5392.907] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 5393.322] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 5393.322] (II) event3 - Power Button: device is a keyboard
[ 5393.330] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 5393.330] (II) event4 - Video Bus: device is a keyboard
[ 5393.336] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 5393.336] (II) event1 - Power Button: device is a keyboard
[ 5393.343] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 5393.343] (II) event2 - Sleep Button: device is a keyboard
[ 5393.351] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 5393.351] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 5393.359] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 5393.359] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 5393.368] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 5393.369] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 5393.378] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 5393.380] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 5393.383] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 5423.395] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 5423.395] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 5513.844] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 5513.844] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 5527.196] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 5527.196] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 5571.260] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 5571.260] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 5572.575] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 5572.575] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 5587.622] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 5587.622] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 5762.287] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 5762.287] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 5765.179] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 5765.179] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 5767.471] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 5767.472] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 5850.913] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 5850.913] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 5853.046] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 5853.046] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 5856.879] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 5856.879] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 6423.764] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 6423.765] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 6944.542] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 6944.542] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 6979.672] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-8ms), your system is too slow
[ 6979.672] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-24ms), your system is too slow
[ 7454.783] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 7454.783] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 7977.090] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 7977.090] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 7994.141] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 7994.142] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 8255.533] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 8255.533] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 8321.354] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 8321.354] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 8416.520] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 8416.520] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 8422.362] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 8422.363] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 8541.692] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 8541.692] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 8564.075] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 8564.075] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 8604.779] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 8604.779] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 8820.787] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 8820.787] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 9017.615] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-1ms), your system is too slow
[ 9203.407] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 9203.407] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 9287.354] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-0ms), your system is too slow
[ 9287.354] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-13ms), your system is too slow
[ 9356.020] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-8ms), your system is too slow
[ 9715.071] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-9ms), your system is too slow
[ 9773.280] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 9773.280] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 9799.762] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 9799.762] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 9801.953] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 9801.953] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 10481.616] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 10481.616] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 10530.933] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 10530.933] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 11045.042] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 11045.042] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 11349.084] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 11349.085] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 11912.018] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-1ms), your system is too slow
[ 12086.593] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-6ms), your system is too slow
[ 12803.319] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 12803.319] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 13354.935] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 13354.935] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 13717.501] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 13717.501] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 13936.920] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-2ms), your system is too slow
[ 13951.755] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 13951.755] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 14129.282] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 14129.282] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 14458.658] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 14458.659] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 14514.051] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 14514.051] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 14645.482] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 14645.483] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 14647.298] (II) event3 - Power Button: device removed
[ 14647.315] (II) event4 - Video Bus: device removed
[ 14647.344] (II) event1 - Power Button: device removed
[ 14647.362] (II) event2 - Sleep Button: device removed
[ 14647.378] (II) event15 - Dell WMI hotkeys: device removed
[ 14647.414] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 14647.434] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 14647.469] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 14650.865] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+900 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, VGA-0: nvidia-auto-select @1440x900 +90+0 {ViewPortIn=1440x900, ViewPortOut=1440x900+0+0}"
[ 14652.304] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 14652.304] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 14652.304] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 14652.304] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 14652.304] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 14652.304] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 14652.304] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 14652.304] (II) NVIDIA(0): Config Options in the README.
[ 14652.336] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 14652.336] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 14652.829] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 14652.829] (II) event3 - Power Button: device is a keyboard
[ 14652.839] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 14652.839] (II) event4 - Video Bus: device is a keyboard
[ 14652.846] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 14652.847] (II) event1 - Power Button: device is a keyboard
[ 14652.854] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 14652.854] (II) event2 - Sleep Button: device is a keyboard
[ 14652.863] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 14652.864] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 14652.875] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 14652.875] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 14652.885] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 14652.886] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 14652.897] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 14652.899] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 14652.902] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 14677.658] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 14677.659] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 15120.903] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 15120.904] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 16485.552] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 16485.555] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 16487.391] (II) event3 - Power Button: device removed
[ 16487.408] (II) event4 - Video Bus: device removed
[ 16487.442] (II) event1 - Power Button: device removed
[ 16487.458] (II) event2 - Sleep Button: device removed
[ 16487.477] (II) event15 - Dell WMI hotkeys: device removed
[ 16487.517] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 16487.547] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 16487.592] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 16491.259] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+900 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, VGA-0: nvidia-auto-select @1440x900 +90+0 {ViewPortIn=1440x900, ViewPortOut=1440x900+0+0}"
[ 16492.696] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 16492.696] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 16492.696] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 16492.696] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 16492.696] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 16492.696] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 16492.696] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 16492.696] (II) NVIDIA(0): Config Options in the README.
[ 16492.728] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 16492.729] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 16493.224] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 16493.224] (II) event3 - Power Button: device is a keyboard
[ 16493.234] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 16493.235] (II) event4 - Video Bus: device is a keyboard
[ 16493.243] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 16493.243] (II) event1 - Power Button: device is a keyboard
[ 16493.250] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 16493.250] (II) event2 - Sleep Button: device is a keyboard
[ 16493.260] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 16493.261] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 16493.271] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 16493.271] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 16493.282] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 16493.283] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 16493.296] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 16493.298] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 16493.302] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 18472.417] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-2ms), your system is too slow
[ 18808.498] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+900 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 18810.651] (II) NVIDIA(0): Setting mode "NULL"
[ 18811.415] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 18814.552] (II) NVIDIA(0): Setting mode "NULL"
[ 18814.923] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 19059.793] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-4ms), your system is too slow
[ 26647.039] (II) event3 - Power Button: device removed
[ 26647.064] (II) event4 - Video Bus: device removed
[ 26647.109] (II) event1 - Power Button: device removed
[ 26647.123] (II) event2 - Sleep Button: device removed
[ 26647.140] (II) event15 - Dell WMI hotkeys: device removed
[ 26647.173] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 26647.207] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 26647.246] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 26650.725] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 26652.077] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 26652.077] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 26652.077] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 26652.077] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 26652.077] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 26652.077] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 26652.077] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 26652.077] (II) NVIDIA(0): Config Options in the README.
[ 26652.404] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 26652.405] (II) event3 - Power Button: device is a keyboard
[ 26652.415] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 26652.415] (II) event4 - Video Bus: device is a keyboard
[ 26652.431] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 26652.431] (II) event1 - Power Button: device is a keyboard
[ 26652.462] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 26652.463] (II) event2 - Sleep Button: device is a keyboard
[ 26652.477] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 26652.478] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 26652.488] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 26652.489] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 26652.499] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 26652.500] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 26652.512] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 26652.514] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 26652.518] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 26841.620] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-4ms), your system is too slow
[ 30224.904] (II) event3 - Power Button: device removed
[ 30224.930] (II) event4 - Video Bus: device removed
[ 30224.979] (II) event1 - Power Button: device removed
[ 30225.006] (II) event2 - Sleep Button: device removed
[ 30225.016] (II) event15 - Dell WMI hotkeys: device removed
[ 30225.063] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 30225.076] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 30225.119] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 30229.772] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 30231.024] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 30231.024] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 30231.025] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 30231.025] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 30231.025] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 30231.025] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 30231.025] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 30231.025] (II) NVIDIA(0): Config Options in the README.
[ 30231.329] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 30231.330] (II) event3 - Power Button: device is a keyboard
[ 30231.341] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 30231.342] (II) event4 - Video Bus: device is a keyboard
[ 30231.350] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 30231.350] (II) event1 - Power Button: device is a keyboard
[ 30231.357] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 30231.358] (II) event2 - Sleep Button: device is a keyboard
[ 30231.367] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 30231.369] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 30231.376] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 30231.377] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 30231.392] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 30231.394] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 30231.405] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 30231.407] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 30231.412] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 34715.480] (II) event3 - Power Button: device removed
[ 34715.505] (II) event4 - Video Bus: device removed
[ 34715.537] (II) event1 - Power Button: device removed
[ 34715.559] (II) event2 - Sleep Button: device removed
[ 34715.575] (II) event15 - Dell WMI hotkeys: device removed
[ 34715.622] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 34715.638] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 34715.678] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 34718.993] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 34720.326] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 34720.327] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 34720.327] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 34720.327] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 34720.327] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 34720.327] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 34720.327] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 34720.327] (II) NVIDIA(0): Config Options in the README.
[ 34720.722] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 34720.723] (II) event3 - Power Button: device is a keyboard
[ 34720.740] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 34720.740] (II) event4 - Video Bus: device is a keyboard
[ 34720.753] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 34720.753] (II) event1 - Power Button: device is a keyboard
[ 34720.764] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 34720.764] (II) event2 - Sleep Button: device is a keyboard
[ 34720.780] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 34720.781] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 34720.794] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 34720.794] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 34720.807] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 34720.808] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 34720.822] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 34720.824] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 34720.827] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 34760.698] (EE) client bug: timer event17 middlebutton: scheduled expiry is in the past (-107ms), your system is too slow
[ 37164.579] (II) event3 - Power Button: device removed
[ 37164.594] (II) event4 - Video Bus: device removed
[ 37164.628] (II) event1 - Power Button: device removed
[ 37164.642] (II) event2 - Sleep Button: device removed
[ 37164.655] (II) event15 - Dell WMI hotkeys: device removed
[ 37164.678] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 37164.691] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 37164.731] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 37168.050] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 37169.310] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 37169.310] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 37169.310] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 37169.310] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 37169.310] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 37169.310] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 37169.311] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 37169.311] (II) NVIDIA(0): Config Options in the README.
[ 37169.611] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 37169.611] (II) event3 - Power Button: device is a keyboard
[ 37169.620] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 37169.620] (II) event4 - Video Bus: device is a keyboard
[ 37169.627] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 37169.628] (II) event1 - Power Button: device is a keyboard
[ 37169.634] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 37169.635] (II) event2 - Sleep Button: device is a keyboard
[ 37169.643] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 37169.644] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 37169.652] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 37169.653] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 37169.662] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 37169.663] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 37169.673] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 37169.675] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 37169.678] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 40219.265] (II) event3 - Power Button: device removed
[ 40219.282] (II) event4 - Video Bus: device removed
[ 40219.316] (II) event1 - Power Button: device removed
[ 40219.338] (II) event2 - Sleep Button: device removed
[ 40219.365] (II) event15 - Dell WMI hotkeys: device removed
[ 40219.401] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 40219.421] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 40219.464] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 40223.150] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 40224.432] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 40224.432] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 40224.432] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 40224.432] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 40224.432] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 40224.432] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 40224.432] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 40224.432] (II) NVIDIA(0): Config Options in the README.
[ 40224.724] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 40224.725] (II) event3 - Power Button: device is a keyboard
[ 40224.734] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 40224.734] (II) event4 - Video Bus: device is a keyboard
[ 40224.742] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 40224.742] (II) event1 - Power Button: device is a keyboard
[ 40224.750] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 40224.750] (II) event2 - Sleep Button: device is a keyboard
[ 40224.759] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 40224.760] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 40224.768] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 40224.768] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 40224.778] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 40224.779] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 40224.791] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 40224.793] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 40224.796] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 40446.272] (II) event3 - Power Button: device removed
[ 40446.299] (II) event4 - Video Bus: device removed
[ 40446.339] (II) event1 - Power Button: device removed
[ 40446.365] (II) event2 - Sleep Button: device removed
[ 40446.378] (II) event15 - Dell WMI hotkeys: device removed
[ 40446.414] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 40446.431] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 40446.481] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 40449.914] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 40451.140] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 40451.141] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 40451.141] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 40451.141] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 40451.141] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 40451.141] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 40451.141] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 40451.141] (II) NVIDIA(0): Config Options in the README.
[ 40451.421] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 40451.421] (II) event3 - Power Button: device is a keyboard
[ 40451.432] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 40451.432] (II) event4 - Video Bus: device is a keyboard
[ 40451.440] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 40451.440] (II) event1 - Power Button: device is a keyboard
[ 40451.447] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 40451.447] (II) event2 - Sleep Button: device is a keyboard
[ 40451.456] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 40451.456] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 40451.465] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 40451.465] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 40451.475] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 40451.476] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 40451.486] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 40451.488] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 40451.492] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 41035.887] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-11ms), your system is too slow
[ 41103.005] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-4ms), your system is too slow
[ 41433.385] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-5ms), your system is too slow
[ 43069.567] (II) event5 - AT Translated Set 2 keyboard: SYN_DROPPED event - some input events have been lost.
[ 43084.156] (EE) client bug: timer event17 trackpoint: scheduled expiry is in the past (-153ms), your system is too slow
[ 44209.808] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-0ms), your system is too slow
[ 45704.276] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-3ms), your system is too slow
[ 45704.280] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-26ms), your system is too slow
[ 45705.934] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-12ms), your system is too slow
[ 45747.615] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-7ms), your system is too slow
[ 46571.017] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-8ms), your system is too slow
[ 46979.606] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-5ms), your system is too slow
[ 48191.119] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-4ms), your system is too slow
[ 48324.727] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-5ms), your system is too slow
[ 54119.582] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: SYN_DROPPED event - some input events have been lost.
[ 54163.519] (EE) client bug: timer event17 middlebutton: scheduled expiry is in the past (-6ms), your system is too slow
[ 55219.020] (II) event5 - AT Translated Set 2 keyboard: SYN_DROPPED event - some input events have been lost.
[ 55595.210] (II) event5 - AT Translated Set 2 keyboard: SYN_DROPPED event - some input events have been lost.
[ 55673.670] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-1ms), your system is too slow
[ 56656.884] (II) event3 - Power Button: device removed
[ 56656.912] (II) event4 - Video Bus: device removed
[ 56656.964] (II) event1 - Power Button: device removed
[ 56656.981] (II) event2 - Sleep Button: device removed
[ 56657.009] (II) event15 - Dell WMI hotkeys: device removed
[ 56657.050] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 56657.076] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 56657.134] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 56660.784] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 56662.038] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 56662.038] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 56662.038] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 56662.039] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 56662.039] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 56662.039] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 56662.039] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 56662.039] (II) NVIDIA(0): Config Options in the README.
[ 56662.342] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 56662.342] (II) event3 - Power Button: device is a keyboard
[ 56662.351] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 56662.351] (II) event4 - Video Bus: device is a keyboard
[ 56662.359] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 56662.359] (II) event1 - Power Button: device is a keyboard
[ 56662.367] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 56662.367] (II) event2 - Sleep Button: device is a keyboard
[ 56662.376] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 56662.377] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 56662.386] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 56662.387] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 56662.397] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 56662.398] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 56662.410] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 56662.414] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 56662.422] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 58667.149] (II) event3 - Power Button: device removed
[ 58667.196] (II) event4 - Video Bus: device removed
[ 58667.258] (II) event1 - Power Button: device removed
[ 58667.281] (II) event2 - Sleep Button: device removed
[ 58667.313] (II) event15 - Dell WMI hotkeys: device removed
[ 58667.366] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 58667.390] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 58667.429] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 58671.833] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 58673.051] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 58673.051] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 58673.052] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 58673.052] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 58673.052] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 58673.052] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 58673.052] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 58673.052] (II) NVIDIA(0): Config Options in the README.
[ 58673.339] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 58673.339] (II) event3 - Power Button: device is a keyboard
[ 58673.348] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 58673.348] (II) event4 - Video Bus: device is a keyboard
[ 58673.355] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 58673.356] (II) event1 - Power Button: device is a keyboard
[ 58673.362] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 58673.362] (II) event2 - Sleep Button: device is a keyboard
[ 58673.371] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 58673.372] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 58673.380] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 58673.380] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 58673.390] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 58673.391] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 58673.401] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 58673.403] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 58673.408] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 66409.804] (II) event3 - Power Button: device removed
[ 66409.827] (II) event4 - Video Bus: device removed
[ 66409.873] (II) event1 - Power Button: device removed
[ 66409.892] (II) event2 - Sleep Button: device removed
[ 66409.909] (II) event15 - Dell WMI hotkeys: device removed
[ 66409.973] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 66409.994] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 66410.039] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 66457.601] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 66458.958] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 66458.958] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 66458.958] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 66458.958] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 66458.958] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 66458.958] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 66458.958] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 66458.958] (II) NVIDIA(0): Config Options in the README.
[ 66459.700] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 66459.700] (II) event3 - Power Button: device is a keyboard
[ 66459.713] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 66459.713] (II) event4 - Video Bus: device is a keyboard
[ 66459.727] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 66459.728] (II) event1 - Power Button: device is a keyboard
[ 66459.735] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 66459.735] (II) event2 - Sleep Button: device is a keyboard
[ 66459.752] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 66459.753] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 66459.766] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 66459.766] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 66459.781] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 66459.782] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 66459.790] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 66459.791] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 66459.794] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 66511.959] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 66553.671] (II) event3 - Power Button: device removed
[ 66553.686] (II) event4 - Video Bus: device removed
[ 66553.729] (II) event1 - Power Button: device removed
[ 66553.749] (II) event2 - Sleep Button: device removed
[ 66553.772] (II) event15 - Dell WMI hotkeys: device removed
[ 66553.849] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 66553.873] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 66553.942] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 66557.483] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 66558.698] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 66559.445] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 66559.445] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 66559.445] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 66559.445] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 66559.445] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 66559.445] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 66559.445] (II) NVIDIA(0): Config Options in the README.
[ 66559.706] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 66559.706] (II) event3 - Power Button: device is a keyboard
[ 66559.715] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 66559.716] (II) event4 - Video Bus: device is a keyboard
[ 66559.723] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 66559.723] (II) event1 - Power Button: device is a keyboard
[ 66559.731] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 66559.731] (II) event2 - Sleep Button: device is a keyboard
[ 66559.741] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 66559.741] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 66559.753] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 66559.753] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 66559.764] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 66559.766] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 66559.778] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 66559.779] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 66559.782] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 66594.619] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: SYN_DROPPED event - some input events have been lost.
[ 66602.768] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 66743.801] (II) event3 - Power Button: device removed
[ 66743.837] (II) event4 - Video Bus: device removed
[ 66743.903] (II) event1 - Power Button: device removed
[ 66743.929] (II) event2 - Sleep Button: device removed
[ 66743.957] (II) event15 - Dell WMI hotkeys: device removed
[ 66744.024] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 66744.068] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 66744.107] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 66747.385] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 66748.601] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 66748.601] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 66748.601] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 66748.601] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 66748.601] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 66748.601] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 66748.601] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 66748.601] (II) NVIDIA(0): Config Options in the README.
[ 66748.836] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 66748.836] (II) event3 - Power Button: device is a keyboard
[ 66748.845] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 66748.846] (II) event4 - Video Bus: device is a keyboard
[ 66748.852] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 66748.852] (II) event1 - Power Button: device is a keyboard
[ 66748.858] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 66748.858] (II) event2 - Sleep Button: device is a keyboard
[ 66748.866] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 66748.866] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 66748.874] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 66748.874] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 66748.883] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 66748.884] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 66748.893] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 66748.894] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 66748.897] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 69875.056] (II) event3 - Power Button: device removed
[ 69875.074] (II) event4 - Video Bus: device removed
[ 69875.129] (II) event1 - Power Button: device removed
[ 69875.150] (II) event2 - Sleep Button: device removed
[ 69875.175] (II) event15 - Dell WMI hotkeys: device removed
[ 69875.232] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 69875.259] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 69875.320] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 69878.350] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 69879.609] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 69879.610] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 69879.610] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 69879.610] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 69879.610] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 69879.610] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 69879.610] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 69879.610] (II) NVIDIA(0): Config Options in the README.
[ 69879.847] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 69879.848] (II) event3 - Power Button: device is a keyboard
[ 69879.856] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 69879.856] (II) event4 - Video Bus: device is a keyboard
[ 69879.863] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 69879.863] (II) event1 - Power Button: device is a keyboard
[ 69879.869] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 69879.869] (II) event2 - Sleep Button: device is a keyboard
[ 69879.876] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 69879.877] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 69879.884] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 69879.884] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 69879.893] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 69879.894] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 69879.902] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 69879.904] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 69879.907] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 70320.934] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-1ms), your system is too slow
[ 70340.211] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-3ms), your system is too slow
[ 70826.301] (II) event3 - Power Button: device removed
[ 70826.330] (II) event4 - Video Bus: device removed
[ 70826.375] (II) event1 - Power Button: device removed
[ 70826.391] (II) event2 - Sleep Button: device removed
[ 70826.415] (II) event15 - Dell WMI hotkeys: device removed
[ 70826.462] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 70826.483] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 70826.542] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 70859.662] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 70862.166] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 70865.681] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 70865.681] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 70865.681] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 70865.681] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 70865.681] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 70865.681] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 70865.681] (II) NVIDIA(0): Config Options in the README.
[ 70866.191] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 70866.192] (II) event3 - Power Button: device is a keyboard
[ 70866.220] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 70866.220] (II) event4 - Video Bus: device is a keyboard
[ 70866.224] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 70866.224] (II) event1 - Power Button: device is a keyboard
[ 70866.243] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 70866.243] (II) event2 - Sleep Button: device is a keyboard
[ 70866.252] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 70866.252] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 70866.262] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 70866.262] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 70866.272] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 70866.273] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 70866.290] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 70866.291] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 70866.293] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 71533.830] (II) event3 - Power Button: device removed
[ 71533.843] (II) event4 - Video Bus: device removed
[ 71533.875] (II) event1 - Power Button: device removed
[ 71533.888] (II) event2 - Sleep Button: device removed
[ 71533.918] (II) event15 - Dell WMI hotkeys: device removed
[ 71533.945] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 71533.968] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 71534.008] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 71537.677] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 71538.896] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 71538.896] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 71538.896] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 71538.896] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 71538.896] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 71538.896] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 71538.896] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 71538.896] (II) NVIDIA(0): Config Options in the README.
[ 71539.202] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 71539.203] (II) event3 - Power Button: device is a keyboard
[ 71539.217] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 71539.218] (II) event4 - Video Bus: device is a keyboard
[ 71539.229] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 71539.229] (II) event1 - Power Button: device is a keyboard
[ 71539.239] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 71539.239] (II) event2 - Sleep Button: device is a keyboard
[ 71539.252] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 71539.252] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 71539.265] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 71539.265] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 71539.278] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 71539.279] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 71539.292] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 71539.295] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 71539.298] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 72066.231] (II) event3 - Power Button: device removed
[ 72066.245] (II) event4 - Video Bus: device removed
[ 72066.279] (II) event1 - Power Button: device removed
[ 72066.303] (II) event2 - Sleep Button: device removed
[ 72066.315] (II) event15 - Dell WMI hotkeys: device removed
[ 72066.349] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 72066.375] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 72066.418] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 72070.584] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 72071.802] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 72071.802] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 72071.802] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 72071.802] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 72071.802] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 72071.802] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 72071.802] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 72071.802] (II) NVIDIA(0): Config Options in the README.
[ 72072.106] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 72072.106] (II) event3 - Power Button: device is a keyboard
[ 72072.116] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 72072.117] (II) event4 - Video Bus: device is a keyboard
[ 72072.125] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 72072.125] (II) event1 - Power Button: device is a keyboard
[ 72072.132] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 72072.132] (II) event2 - Sleep Button: device is a keyboard
[ 72072.142] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 72072.142] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 72072.151] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 72072.151] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 72072.161] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 72072.163] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 72072.173] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 72072.175] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 72072.179] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 77270.015] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-9ms), your system is too slow
[ 77408.139] (II) event3 - Power Button: device removed
[ 77408.155] (II) event4 - Video Bus: device removed
[ 77408.179] (II) event1 - Power Button: device removed
[ 77408.211] (II) event2 - Sleep Button: device removed
[ 77408.228] (II) event15 - Dell WMI hotkeys: device removed
[ 77408.261] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 77408.284] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 77408.334] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 77412.142] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 77413.382] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 77413.382] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 77413.383] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 77413.383] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 77413.383] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 77413.383] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 77413.383] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 77413.383] (II) NVIDIA(0): Config Options in the README.
[ 77413.685] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 77413.685] (II) event3 - Power Button: device is a keyboard
[ 77413.696] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 77413.696] (II) event4 - Video Bus: device is a keyboard
[ 77413.704] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 77413.704] (II) event1 - Power Button: device is a keyboard
[ 77413.712] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 77413.712] (II) event2 - Sleep Button: device is a keyboard
[ 77413.722] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 77413.723] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 77413.732] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 77413.733] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 77413.745] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 77413.746] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 77413.759] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 77413.761] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 77413.765] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 77834.818] (II) event3 - Power Button: device removed
[ 77834.838] (II) event4 - Video Bus: device removed
[ 77834.871] (II) event1 - Power Button: device removed
[ 77834.885] (II) event2 - Sleep Button: device removed
[ 77834.901] (II) event15 - Dell WMI hotkeys: device removed
[ 77834.926] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 77834.944] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 77834.975] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 77840.056] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 77841.309] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 77841.310] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 77841.310] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 77841.310] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 77841.310] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 77841.310] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 77841.310] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 77841.310] (II) NVIDIA(0): Config Options in the README.
[ 77841.611] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 77841.612] (II) event3 - Power Button: device is a keyboard
[ 77841.623] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 77841.623] (II) event4 - Video Bus: device is a keyboard
[ 77841.631] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 77841.631] (II) event1 - Power Button: device is a keyboard
[ 77841.639] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 77841.639] (II) event2 - Sleep Button: device is a keyboard
[ 77841.648] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 77841.649] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 77841.659] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 77841.659] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 77841.669] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 77841.671] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 77841.681] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 77841.683] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 77841.687] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 80631.926] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-5ms), your system is too slow
[ 81924.286] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-29ms), your system is too slow
[ 81924.286] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-42ms), your system is too slow
[ 81929.656] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-6ms), your system is too slow
[ 81929.656] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-19ms), your system is too slow
[ 81975.990] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-11ms), your system is too slow
[ 83342.141] (II) event3 - Power Button: device removed
[ 83342.166] (II) event4 - Video Bus: device removed
[ 83342.201] (II) event1 - Power Button: device removed
[ 83342.217] (II) event2 - Sleep Button: device removed
[ 83342.237] (II) event15 - Dell WMI hotkeys: device removed
[ 83342.270] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 83342.291] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 83342.327] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 83345.709] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 83347.019] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 83347.019] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 83347.019] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 83347.019] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 83347.019] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 83347.020] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 83347.020] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 83347.020] (II) NVIDIA(0): Config Options in the README.
[ 83347.370] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 83347.371] (II) event3 - Power Button: device is a keyboard
[ 83347.391] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 83347.392] (II) event4 - Video Bus: device is a keyboard
[ 83347.404] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 83347.404] (II) event1 - Power Button: device is a keyboard
[ 83347.417] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 83347.417] (II) event2 - Sleep Button: device is a keyboard
[ 83347.431] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 83347.432] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 83347.446] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 83347.447] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 83347.462] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 83347.464] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 83347.481] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 83347.483] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 83347.486] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 84377.898] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-0ms), your system is too slow
[ 84377.898] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-14ms), your system is too slow
[ 88465.886] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-6ms), your system is too slow
[ 89300.477] (II) event3 - Power Button: device removed
[ 89300.491] (II) event4 - Video Bus: device removed
[ 89300.523] (II) event1 - Power Button: device removed
[ 89300.542] (II) event2 - Sleep Button: device removed
[ 89300.560] (II) event15 - Dell WMI hotkeys: device removed
[ 89300.595] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 89300.611] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 89300.643] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 89303.796] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 89305.081] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 89305.081] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 89305.081] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 89305.081] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 89305.081] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 89305.081] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 89305.081] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 89305.081] (II) NVIDIA(0): Config Options in the README.
[ 89305.315] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 89305.316] (II) event3 - Power Button: device is a keyboard
[ 89305.323] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 89305.323] (II) event4 - Video Bus: device is a keyboard
[ 89305.330] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 89305.331] (II) event1 - Power Button: device is a keyboard
[ 89305.336] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 89305.336] (II) event2 - Sleep Button: device is a keyboard
[ 89305.343] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 89305.344] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 89305.350] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 89305.350] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 89305.358] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 89305.359] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 89305.368] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 89305.369] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 89305.371] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 90203.163] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-11ms), your system is too slow
[ 92741.121] (II) event3 - Power Button: device removed
[ 92741.156] (II) event4 - Video Bus: device removed
[ 92741.200] (II) event1 - Power Button: device removed
[ 92741.230] (II) event2 - Sleep Button: device removed
[ 92741.244] (II) event15 - Dell WMI hotkeys: device removed
[ 92741.274] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 92741.284] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 92741.320] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 92745.160] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 92746.403] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 92746.403] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 92746.403] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 92746.403] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 92746.403] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 92746.403] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 92746.403] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 92746.403] (II) NVIDIA(0): Config Options in the README.
[ 92746.807] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 92746.807] (II) event3 - Power Button: device is a keyboard
[ 92746.822] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 92746.822] (II) event4 - Video Bus: device is a keyboard
[ 92746.832] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 92746.832] (II) event1 - Power Button: device is a keyboard
[ 92746.842] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 92746.842] (II) event2 - Sleep Button: device is a keyboard
[ 92746.863] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 92746.864] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 92746.876] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 92746.876] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 92746.889] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 92746.890] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 92746.903] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 92746.905] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 92746.909] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 93855.623] (II) event3 - Power Button: device removed
[ 93855.639] (II) event4 - Video Bus: device removed
[ 93855.671] (II) event1 - Power Button: device removed
[ 93855.684] (II) event2 - Sleep Button: device removed
[ 93855.708] (II) event15 - Dell WMI hotkeys: device removed
[ 93855.754] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 93855.774] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 93855.814] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 93859.051] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 93860.305] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 93860.305] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 93860.305] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 93860.305] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 93860.305] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 93860.305] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 93860.305] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 93860.305] (II) NVIDIA(0): Config Options in the README.
[ 93860.820] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 93860.821] (II) event3 - Power Button: device is a keyboard
[ 93860.869] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 93860.869] (II) event4 - Video Bus: device is a keyboard
[ 93860.890] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 93860.890] (II) event1 - Power Button: device is a keyboard
[ 93860.912] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 93860.913] (II) event2 - Sleep Button: device is a keyboard
[ 93860.927] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 93860.927] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 93860.940] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 93860.941] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 93860.953] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 93860.954] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 93860.968] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 93860.970] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 93860.973] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 93885.575] (II) event3 - Power Button: device removed
[ 93885.589] (II) event4 - Video Bus: device removed
[ 93885.629] (II) event1 - Power Button: device removed
[ 93885.653] (II) event2 - Sleep Button: device removed
[ 93885.676] (II) event15 - Dell WMI hotkeys: device removed
[ 93885.709] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 93885.729] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 93885.763] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 93950.575] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 93956.420] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 93959.451] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 93959.451] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 93959.451] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 93959.451] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 93959.451] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 93959.451] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 93959.451] (II) NVIDIA(0): Config Options in the README.
[ 93963.468] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 93963.468] (II) event3 - Power Button: device is a keyboard
[ 93963.567] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 93963.568] (II) event4 - Video Bus: device is a keyboard
[ 93963.583] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 93963.583] (II) event1 - Power Button: device is a keyboard
[ 93963.594] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 93963.595] (II) event2 - Sleep Button: device is a keyboard
[ 93963.606] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 93963.607] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 93963.626] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 93963.626] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 93963.643] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 93963.644] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 93963.660] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 93963.662] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 93963.663] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 94705.797] (II) event3 - Power Button: device removed
[ 94705.835] (II) event4 - Video Bus: device removed
[ 94705.884] (II) event1 - Power Button: device removed
[ 94705.900] (II) event2 - Sleep Button: device removed
[ 94705.924] (II) event15 - Dell WMI hotkeys: device removed
[ 94705.980] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 94706.000] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 94706.027] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 94709.245] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 94710.463] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 94710.463] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 94710.463] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 94710.463] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 94710.463] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 94710.463] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 94710.463] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 94710.463] (II) NVIDIA(0): Config Options in the README.
[ 94710.769] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 94710.769] (II) event3 - Power Button: device is a keyboard
[ 94710.780] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 94710.780] (II) event4 - Video Bus: device is a keyboard
[ 94710.795] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 94710.796] (II) event1 - Power Button: device is a keyboard
[ 94710.803] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 94710.804] (II) event2 - Sleep Button: device is a keyboard
[ 94710.813] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 94710.813] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 94710.821] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 94710.822] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 94710.832] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 94710.833] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 94710.843] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 94710.845] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 94710.849] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 95057.646] (II) event3 - Power Button: device removed
[ 95057.669] (II) event4 - Video Bus: device removed
[ 95057.703] (II) event1 - Power Button: device removed
[ 95057.719] (II) event2 - Sleep Button: device removed
[ 95057.739] (II) event15 - Dell WMI hotkeys: device removed
[ 95057.773] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 95057.803] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[ 95057.836] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[ 95061.246] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 95062.465] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 95062.465] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 95062.465] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 95062.465] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 95062.466] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 95062.466] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 95062.466] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 95062.466] (II) NVIDIA(0): Config Options in the README.
[ 95062.761] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 95062.761] (II) event3 - Power Button: device is a keyboard
[ 95062.771] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 95062.771] (II) event4 - Video Bus: device is a keyboard
[ 95062.778] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 95062.779] (II) event1 - Power Button: device is a keyboard
[ 95062.786] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 95062.786] (II) event2 - Sleep Button: device is a keyboard
[ 95062.795] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 95062.795] (II) event15 - Dell WMI hotkeys: device is a keyboard
[ 95062.804] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 95062.804] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 95062.814] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[ 95062.816] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[ 95062.826] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[ 95062.827] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 95062.831] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[ 95726.286] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-7ms), your system is too slow
[ 95860.683] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-4ms), your system is too slow
[ 97304.021] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-6ms), your system is too slow
[ 99058.991] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-15ms), your system is too slow
[ 99058.992] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-39ms), your system is too slow
[ 99421.484] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-38ms), your system is too slow
[ 99421.519] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-177ms), your system is too slow
[ 99687.835] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-31ms), your system is too slow
[ 99687.836] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-50ms), your system is too slow
[ 99822.339] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-61ms), your system is too slow
[ 99822.339] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-74ms), your system is too slow
[ 99836.106] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-63ms), your system is too slow
[ 99836.106] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-77ms), your system is too slow
[ 99849.176] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-19ms), your system is too slow
[ 99849.176] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-32ms), your system is too slow
[ 99892.405] (EE) client bug: timer event17 gestures: scheduled expiry is in the past (-73ms), your system is too slow
[ 99919.534] (EE) client bug: timer event17 gestures: scheduled expiry is in the past (-28ms), your system is too slow
[100202.363] (EE) client bug: timer event17 middlebutton: scheduled expiry is in the past (-3ms), your system is too slow
[100269.384] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-12ms), your system is too slow
[100269.384] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-25ms), your system is too slow
[101127.028] (II) event3 - Power Button: device removed
[101127.043] (II) event4 - Video Bus: device removed
[101127.079] (II) event1 - Power Button: device removed
[101127.095] (II) event2 - Sleep Button: device removed
[101127.132] (II) event15 - Dell WMI hotkeys: device removed
[101127.179] (II) event5 - AT Translated Set 2 keyboard: device removed
[101127.215] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[101127.253] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[101130.893] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[101132.148] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[101132.148] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[101132.148] (II) NVIDIA(0): configuration option may not be set correctly. When the
[101132.148] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[101132.148] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[101132.148] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[101132.148] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[101132.148] (II) NVIDIA(0): Config Options in the README.
[101132.453] (II) event3 - Power Button: is tagged by udev as: Keyboard
[101132.453] (II) event3 - Power Button: device is a keyboard
[101132.464] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[101132.465] (II) event4 - Video Bus: device is a keyboard
[101132.472] (II) event1 - Power Button: is tagged by udev as: Keyboard
[101132.473] (II) event1 - Power Button: device is a keyboard
[101132.480] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[101132.480] (II) event2 - Sleep Button: device is a keyboard
[101132.490] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[101132.490] (II) event15 - Dell WMI hotkeys: device is a keyboard
[101132.501] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[101132.501] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[101132.511] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[101132.513] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[101132.525] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[101132.527] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[101132.531] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[101905.318] (II) event3 - Power Button: device removed
[101905.335] (II) event4 - Video Bus: device removed
[101905.361] (II) event1 - Power Button: device removed
[101905.384] (II) event2 - Sleep Button: device removed
[101905.395] (II) event15 - Dell WMI hotkeys: device removed
[101905.425] (II) event5 - AT Translated Set 2 keyboard: device removed
[101905.445] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[101905.505] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[101908.921] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[101910.157] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[101910.157] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[101910.157] (II) NVIDIA(0): configuration option may not be set correctly. When the
[101910.158] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[101910.158] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[101910.158] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[101910.158] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[101910.158] (II) NVIDIA(0): Config Options in the README.
[101910.457] (II) event3 - Power Button: is tagged by udev as: Keyboard
[101910.457] (II) event3 - Power Button: device is a keyboard
[101910.467] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[101910.467] (II) event4 - Video Bus: device is a keyboard
[101910.474] (II) event1 - Power Button: is tagged by udev as: Keyboard
[101910.475] (II) event1 - Power Button: device is a keyboard
[101910.482] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[101910.482] (II) event2 - Sleep Button: device is a keyboard
[101910.491] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[101910.492] (II) event15 - Dell WMI hotkeys: device is a keyboard
[101910.500] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[101910.500] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[101910.510] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[101910.511] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[101910.521] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[101910.523] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[101910.529] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[102555.012] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-8ms), your system is too slow
[103383.522] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-11ms), your system is too slow
[104293.308] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-4ms), your system is too slow
[104508.524] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-5ms), your system is too slow
[105487.261] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-6ms), your system is too slow
[110624.845] (II) event3 - Power Button: device removed
[110624.867] (II) event4 - Video Bus: device removed
[110624.898] (II) event1 - Power Button: device removed
[110624.914] (II) event2 - Sleep Button: device removed
[110624.930] (II) event15 - Dell WMI hotkeys: device removed
[110624.965] (II) event5 - AT Translated Set 2 keyboard: device removed
[110624.978] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[110625.011] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[110695.583] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[110697.871] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[110697.895] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[110697.895] (II) NVIDIA(0): configuration option may not be set correctly. When the
[110697.895] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[110697.895] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[110697.895] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[110697.895] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[110697.895] (II) NVIDIA(0): Config Options in the README.
[110706.623] (II) event3 - Power Button: is tagged by udev as: Keyboard
[110706.624] (II) event3 - Power Button: device is a keyboard
[110706.818] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[110706.818] (II) event4 - Video Bus: device is a keyboard
[110706.842] (II) event1 - Power Button: is tagged by udev as: Keyboard
[110706.842] (II) event1 - Power Button: device is a keyboard
[110706.865] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[110706.865] (II) event2 - Sleep Button: device is a keyboard
[110706.885] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[110706.886] (II) event15 - Dell WMI hotkeys: device is a keyboard
[110706.922] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[110706.922] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[110706.940] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[110706.940] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[110706.955] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[110706.956] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[110706.959] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[110756.495] (EE) client bug: timer event17 gestures: scheduled expiry is in the past (-30ms), your system is too slow
[112872.412] (II) event3 - Power Button: device removed
[112872.436] (II) event4 - Video Bus: device removed
[112872.465] (II) event1 - Power Button: device removed
[112872.478] (II) event2 - Sleep Button: device removed
[112872.497] (II) event15 - Dell WMI hotkeys: device removed
[112872.527] (II) event5 - AT Translated Set 2 keyboard: device removed
[112872.540] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[112872.579] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[112906.060] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[112907.682] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[112907.687] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[112907.687] (II) NVIDIA(0): configuration option may not be set correctly. When the
[112907.688] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[112907.688] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[112907.688] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[112907.688] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[112907.688] (II) NVIDIA(0): Config Options in the README.
[112908.719] (II) event3 - Power Button: is tagged by udev as: Keyboard
[112908.720] (II) event3 - Power Button: device is a keyboard
[112908.780] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[112908.783] (II) event4 - Video Bus: device is a keyboard
[112908.788] (II) event1 - Power Button: is tagged by udev as: Keyboard
[112908.788] (II) event1 - Power Button: device is a keyboard
[112908.799] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[112908.800] (II) event2 - Sleep Button: device is a keyboard
[112908.815] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[112908.816] (II) event15 - Dell WMI hotkeys: device is a keyboard
[112908.831] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[112908.833] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[112908.855] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[112908.857] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[112908.883] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[112908.884] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[112908.886] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[113112.025] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: SYN_DROPPED event - some input events have been lost.
[113336.052] (II) event3 - Power Button: device removed
[113336.064] (II) event4 - Video Bus: device removed
[113336.091] (II) event1 - Power Button: device removed
[113336.104] (II) event2 - Sleep Button: device removed
[113336.121] (II) event15 - Dell WMI hotkeys: device removed
[113336.161] (II) event5 - AT Translated Set 2 keyboard: device removed
[113336.182] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[113336.224] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[113339.788] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[113341.025] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[113341.025] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[113341.025] (II) NVIDIA(0): configuration option may not be set correctly. When the
[113341.025] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[113341.025] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[113341.025] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[113341.025] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[113341.025] (II) NVIDIA(0): Config Options in the README.
[113341.374] (II) event3 - Power Button: is tagged by udev as: Keyboard
[113341.374] (II) event3 - Power Button: device is a keyboard
[113341.405] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[113341.405] (II) event4 - Video Bus: device is a keyboard
[113341.418] (II) event1 - Power Button: is tagged by udev as: Keyboard
[113341.419] (II) event1 - Power Button: device is a keyboard
[113341.428] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[113341.428] (II) event2 - Sleep Button: device is a keyboard
[113341.438] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[113341.438] (II) event15 - Dell WMI hotkeys: device is a keyboard
[113341.449] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[113341.449] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[113341.460] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[113341.461] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[113341.472] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[113341.474] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[113341.478] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[113775.107] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-2ms), your system is too slow
[113775.108] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-15ms), your system is too slow
[114644.770] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-12ms), your system is too slow
[116569.342] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-9ms), your system is too slow
[116569.343] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-28ms), your system is too slow
[117833.843] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-9ms), your system is too slow
[117833.844] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-25ms), your system is too slow
[122540.807] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-10ms), your system is too slow
[122548.100] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-24ms), your system is too slow
[122548.101] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-38ms), your system is too slow
[122640.619] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-0ms), your system is too slow
[122799.843] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-1ms), your system is too slow
[124562.126] (II) event3 - Power Button: device removed
[124562.165] (II) event4 - Video Bus: device removed
[124562.210] (II) event1 - Power Button: device removed
[124562.220] (II) event2 - Sleep Button: device removed
[124562.246] (II) event15 - Dell WMI hotkeys: device removed
[124562.277] (II) event5 - AT Translated Set 2 keyboard: device removed
[124562.303] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[124562.330] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[124565.805] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[124567.080] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[124567.080] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[124567.080] (II) NVIDIA(0): configuration option may not be set correctly. When the
[124567.080] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[124567.080] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[124567.080] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[124567.080] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[124567.080] (II) NVIDIA(0): Config Options in the README.
[124567.412] (II) event3 - Power Button: is tagged by udev as: Keyboard
[124567.412] (II) event3 - Power Button: device is a keyboard
[124567.427] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[124567.427] (II) event4 - Video Bus: device is a keyboard
[124567.437] (II) event1 - Power Button: is tagged by udev as: Keyboard
[124567.438] (II) event1 - Power Button: device is a keyboard
[124567.448] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[124567.448] (II) event2 - Sleep Button: device is a keyboard
[124567.459] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[124567.459] (II) event15 - Dell WMI hotkeys: device is a keyboard
[124567.469] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[124567.470] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[124567.481] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[124567.482] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[124567.494] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[124567.496] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[124567.500] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[124697.258] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-1ms), your system is too slow
[124706.889] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-3ms), your system is too slow
[126251.475] (EE) client bug: timer event17 middlebutton: scheduled expiry is in the past (-244ms), your system is too slow
[126252.044] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: SYN_DROPPED event - some input events have been lost.
[129451.319] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-4ms), your system is too slow
[129453.309] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-28ms), your system is too slow
[129453.309] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-41ms), your system is too slow
[129912.620] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-4ms), your system is too slow
[130044.999] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-10ms), your system is too slow
[130297.154] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-3ms), your system is too slow
[132459.953] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-3ms), your system is too slow
[135124.670] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-20ms), your system is too slow
[135124.674] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-40ms), your system is too slow
[135124.749] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-24ms), your system is too slow
[135124.835] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-11ms), your system is too slow
[135125.020] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-0ms), your system is too slow
[135134.165] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-0ms), your system is too slow
[135134.355] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-2ms), your system is too slow
[135134.910] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-0ms), your system is too slow
[135134.990] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-2ms), your system is too slow
[135135.329] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-0ms), your system is too slow
[135137.109] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-5ms), your system is too slow
[135137.187] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-0ms), your system is too slow
[135137.187] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-14ms), your system is too slow
[135138.178] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-12ms), your system is too slow
[135139.632] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-13ms), your system is too slow
[135139.871] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-47ms), your system is too slow
[135139.939] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-6ms), your system is too slow
[135140.378] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-0ms), your system is too slow
[135149.503] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-0ms), your system is too slow
[139209.575] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-2ms), your system is too slow
[139787.157] (II) event3 - Power Button: device removed
[139787.177] (II) event4 - Video Bus: device removed
[139787.215] (II) event1 - Power Button: device removed
[139787.232] (II) event2 - Sleep Button: device removed
[139787.245] (II) event15 - Dell WMI hotkeys: device removed
[139787.289] (II) event5 - AT Translated Set 2 keyboard: device removed
[139787.305] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[139787.336] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[139791.287] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[139792.608] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[139792.609] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[139792.609] (II) NVIDIA(0): configuration option may not be set correctly. When the
[139792.609] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[139792.609] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[139792.609] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[139792.609] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[139792.609] (II) NVIDIA(0): Config Options in the README.
[139793.082] (II) event3 - Power Button: is tagged by udev as: Keyboard
[139793.082] (II) event3 - Power Button: device is a keyboard
[139793.104] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[139793.105] (II) event4 - Video Bus: device is a keyboard
[139793.131] (II) event1 - Power Button: is tagged by udev as: Keyboard
[139793.132] (II) event1 - Power Button: device is a keyboard
[139793.143] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[139793.144] (II) event2 - Sleep Button: device is a keyboard
[139793.163] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[139793.167] (II) event15 - Dell WMI hotkeys: device is a keyboard
[139793.188] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[139793.188] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[139793.213] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[139793.218] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[139793.242] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[139793.244] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[139793.255] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[139805.644] (EE) client bug: timer event17 trackpoint: scheduled expiry is in the past (-92ms), your system is too slow
[139805.663] (EE) client bug: timer event17 trackpoint: scheduled expiry is in the past (-122ms), your system is too slow
[140409.612] (EE) client bug: timer event17 trackpoint: scheduled expiry is in the past (-2ms), your system is too slow
[140816.944] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-9ms), your system is too slow
[140917.315] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-28ms), your system is too slow
[140969.112] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-52ms), your system is too slow
[140969.112] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-65ms), your system is too slow
[141008.788] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-2ms), your system is too slow
[141284.683] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-3ms), your system is too slow
[141329.095] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-14ms), your system is too slow
[141886.460] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-4ms), your system is too slow
[142829.089] (EE) client bug: timer event17 middlebutton: scheduled expiry is in the past (-26ms), your system is too slow
[143141.085] (EE) client bug: timer event17 middlebutton: scheduled expiry is in the past (-11ms), your system is too slow
[143264.638] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-3ms), your system is too slow
[143392.488] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-53ms), your system is too slow
[143503.861] (II) event3 - Power Button: device removed
[143503.888] (II) event4 - Video Bus: device removed
[143503.916] (II) event1 - Power Button: device removed
[143503.938] (II) event2 - Sleep Button: device removed
[143503.949] (II) event15 - Dell WMI hotkeys: device removed
[143503.978] (II) event5 - AT Translated Set 2 keyboard: device removed
[143503.991] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device removed
[143504.038] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[143507.410] (II) NVIDIA(0): Setting mode "DP-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[143508.708] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[143508.708] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[143508.708] (II) NVIDIA(0): configuration option may not be set correctly. When the
[143508.708] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[143508.708] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[143508.708] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[143508.708] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[143508.708] (II) NVIDIA(0): Config Options in the README.
[143509.214] (II) event3 - Power Button: is tagged by udev as: Keyboard
[143509.215] (II) event3 - Power Button: device is a keyboard
[143509.227] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[143509.227] (II) event4 - Video Bus: device is a keyboard
[143509.237] (II) event1 - Power Button: is tagged by udev as: Keyboard
[143509.237] (II) event1 - Power Button: device is a keyboard
[143509.246] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[143509.247] (II) event2 - Sleep Button: device is a keyboard
[143509.259] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[143509.259] (II) event15 - Dell WMI hotkeys: device is a keyboard
[143509.270] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[143509.271] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[143509.283] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[143509.284] (II) event16 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[143509.297] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[143509.299] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[143509.302] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[143621.503] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-61ms), your system is too slow
[143621.504] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-80ms), your system is too slow
[143650.555] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-16ms), your system is too slow
[143650.555] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-29ms), your system is too slow
[143666.267] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-18ms), your system is too slow
[143666.267] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-31ms), your system is too slow
[143690.757] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-41ms), your system is too slow
[143690.757] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-54ms), your system is too slow
[143863.819] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: SYN_DROPPED event - some input events have been lost.
[144066.858] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-15ms), your system is too slow
[144066.859] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-29ms), your system is too slow
[145607.419] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-50ms), your system is too slow
[145607.596] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-49ms), your system is too slow
[145607.596] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-62ms), your system is too slow
[145659.507] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-0ms), your system is too slow
[145659.507] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-13ms), your system is too slow
[145663.604] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-9ms), your system is too slow
[146952.104] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-6ms), your system is too slow
[146952.107] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-24ms), your system is too slow
[151716.365] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: SYN_DROPPED event - some input events have been lost.
[151716.460] (EE) client bug: timer event17 gestures: scheduled expiry is in the past (-2258ms), your system is too slow
[151732.289] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-224ms), your system is too slow
[151732.289] (EE) client bug: timer event16 btnscroll: scheduled expiry is in the past (-49ms), your system is too slow
[151732.289] (EE) client bug: timer event16 debounce: scheduled expiry is in the past (-77ms), your system is too slow
[151732.289] (EE) client bug: timer event16 debounce short: scheduled expiry is in the past (-90ms), your system is too slow
[151734.432] (II) event17 - AlpsPS/2 ALPS DualPoint TouchPad: SYN_DROPPED event - some input events have been lost.And here's the last couple lines of my sudo journalctl -k -b-1:
Aug 18 12:06:01 arch-btw kernel: audit: type=1327 audit(1597777561.525:18847): proctitle=2F7573722F62696E2F63726F6E64002D6E
Aug 18 12:06:01 arch-btw kernel: audit: type=1105 audit(1597777561.525:18848): pid=2223837 uid=0 auid=0 ses=2583 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:06:01 arch-btw kernel: audit: type=1110 audit(1597777561.525:18849): pid=2223837 uid=0 auid=0 ses=2583 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:06:01 arch-btw kernel: audit: type=1104 audit(1597777561.535:18850): pid=2223837 uid=0 auid=0 ses=2583 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:06:01 arch-btw kernel: audit: type=1106 audit(1597777561.535:18851): pid=2223837 uid=0 auid=0 ses=2583 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:07:01 arch-btw kernel: audit: type=1101 audit(1597777621.544:18852): pid=2225048 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:07:01 arch-btw kernel: audit: type=1103 audit(1597777621.544:18853): pid=2225048 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:07:01 arch-btw kernel: audit: type=1006 audit(1597777621.544:18854): pid=2225048 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2584 res=1
Aug 18 12:07:01 arch-btw kernel: audit: type=1300 audit(1597777621.544:18854): arch=c000003e syscall=1 success=yes exit=1 a0=3 a1=7ffc1d343ae0 a2=1 a3=7ffc1d3437f7 items=0 ppid=633 pid=2225048 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2584 comm="crond" exe="/usr/bin/crond" key=(null)
Aug 18 12:07:01 arch-btw kernel: audit: type=1327 audit(1597777621.544:18854): proctitle=2F7573722F62696E2F63726F6E64002D6E
Aug 18 12:07:01 arch-btw kernel: audit: type=1105 audit(1597777621.544:18855): pid=2225048 uid=0 auid=0 ses=2584 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:07:01 arch-btw kernel: audit: type=1110 audit(1597777621.544:18856): pid=2225048 uid=0 auid=0 ses=2584 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:07:01 arch-btw kernel: audit: type=1104 audit(1597777621.554:18857): pid=2225048 uid=0 auid=0 ses=2584 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:07:01 arch-btw kernel: audit: type=1106 audit(1597777621.558:18858): pid=2225048 uid=0 auid=0 ses=2584 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:08:01 arch-btw kernel: audit: type=1101 audit(1597777681.564:18859): pid=2226209 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:08:01 arch-btw kernel: audit: type=1103 audit(1597777681.564:18860): pid=2226209 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:08:01 arch-btw kernel: audit: type=1006 audit(1597777681.564:18861): pid=2226209 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2585 res=1
Aug 18 12:08:01 arch-btw kernel: audit: type=1300 audit(1597777681.564:18861): arch=c000003e syscall=1 success=yes exit=1 a0=3 a1=7ffc1d343ae0 a2=1 a3=7ffc1d3437f7 items=0 ppid=633 pid=2226209 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2585 comm="crond" exe="/usr/bin/crond" key=(null)
Aug 18 12:08:01 arch-btw kernel: audit: type=1327 audit(1597777681.564:18861): proctitle=2F7573722F62696E2F63726F6E64002D6E
Aug 18 12:08:01 arch-btw kernel: audit: type=1105 audit(1597777681.564:18862): pid=2226209 uid=0 auid=0 ses=2585 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:08:01 arch-btw kernel: audit: type=1110 audit(1597777681.567:18863): pid=2226209 uid=0 auid=0 ses=2585 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:08:01 arch-btw kernel: audit: type=1104 audit(1597777681.574:18864): pid=2226209 uid=0 auid=0 ses=2585 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:08:01 arch-btw kernel: audit: type=1106 audit(1597777681.574:18865): pid=2226209 uid=0 auid=0 ses=2585 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:09:01 arch-btw kernel: audit: type=1101 audit(1597777741.583:18866): pid=2227376 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:09:01 arch-btw kernel: audit: type=1103 audit(1597777741.583:18867): pid=2227376 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:09:01 arch-btw kernel: audit: type=1006 audit(1597777741.583:18868): pid=2227376 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2586 res=1
Aug 18 12:09:01 arch-btw kernel: audit: type=1300 audit(1597777741.583:18868): arch=c000003e syscall=1 success=yes exit=1 a0=3 a1=7ffc1d343ae0 a2=1 a3=7ffc1d3437f7 items=0 ppid=633 pid=2227376 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2586 comm="crond" exe="/usr/bin/crond" key=(null)
Aug 18 12:09:01 arch-btw kernel: audit: type=1327 audit(1597777741.583:18868): proctitle=2F7573722F62696E2F63726F6E64002D6E
Aug 18 12:09:01 arch-btw kernel: audit: type=1105 audit(1597777741.583:18869): pid=2227376 uid=0 auid=0 ses=2586 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:09:01 arch-btw kernel: audit: type=1110 audit(1597777741.583:18870): pid=2227376 uid=0 auid=0 ses=2586 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:09:01 arch-btw kernel: audit: type=1104 audit(1597777741.590:18871): pid=2227376 uid=0 auid=0 ses=2586 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:09:01 arch-btw kernel: audit: type=1106 audit(1597777741.590:18872): pid=2227376 uid=0 auid=0 ses=2586 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:10:01 arch-btw kernel: audit: type=1101 audit(1597777801.596:18873): pid=2228561 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:10:01 arch-btw kernel: audit: type=1103 audit(1597777801.596:18874): pid=2228561 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:10:01 arch-btw kernel: audit: type=1006 audit(1597777801.596:18875): pid=2228561 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2587 res=1
Aug 18 12:10:01 arch-btw kernel: audit: type=1300 audit(1597777801.596:18875): arch=c000003e syscall=1 success=yes exit=1 a0=3 a1=7ffc1d343ae0 a2=1 a3=7ffc1d3437f7 items=0 ppid=633 pid=2228561 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2587 comm="crond" exe="/usr/bin/crond" key=(null)
Aug 18 12:10:01 arch-btw kernel: audit: type=1327 audit(1597777801.596:18875): proctitle=2F7573722F62696E2F63726F6E64002D6E
Aug 18 12:10:01 arch-btw kernel: audit: type=1105 audit(1597777801.600:18876): pid=2228561 uid=0 auid=0 ses=2587 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:10:01 arch-btw kernel: audit: type=1110 audit(1597777801.600:18877): pid=2228561 uid=0 auid=0 ses=2587 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:10:01 arch-btw kernel: audit: type=1104 audit(1597777801.606:18878): pid=2228561 uid=0 auid=0 ses=2587 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:10:01 arch-btw kernel: audit: type=1106 audit(1597777801.606:18879): pid=2228561 uid=0 auid=0 ses=2587 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:11:01 arch-btw kernel: audit: type=1101 audit(1597777861.612:18880): pid=2229731 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:11:01 arch-btw kernel: audit: type=1103 audit(1597777861.612:18881): pid=2229731 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:11:01 arch-btw kernel: audit: type=1006 audit(1597777861.612:18882): pid=2229731 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2588 res=1
Aug 18 12:11:01 arch-btw kernel: audit: type=1300 audit(1597777861.612:18882): arch=c000003e syscall=1 success=yes exit=1 a0=3 a1=7ffc1d343ae0 a2=1 a3=7ffc1d3437f7 items=0 ppid=633 pid=2229731 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2588 comm="crond" exe="/usr/bin/crond" key=(null)
Aug 18 12:11:01 arch-btw kernel: audit: type=1327 audit(1597777861.612:18882): proctitle=2F7573722F62696E2F63726F6E64002D6E
Aug 18 12:11:01 arch-btw kernel: audit: type=1105 audit(1597777861.616:18883): pid=2229731 uid=0 auid=0 ses=2588 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:11:01 arch-btw kernel: audit: type=1110 audit(1597777861.616:18884): pid=2229731 uid=0 auid=0 ses=2588 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:11:01 arch-btw kernel: audit: type=1104 audit(1597777861.622:18885): pid=2229731 uid=0 auid=0 ses=2588 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:11:01 arch-btw kernel: audit: type=1106 audit(1597777861.622:18886): pid=2229731 uid=0 auid=0 ses=2588 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:11:57 arch-btw kernel: e1000e 0000:00:19.0 eno1: NIC Link is Down
Aug 18 12:12:01 arch-btw kernel: audit: type=1101 audit(1597777921.629:18887): pid=2230894 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:12:01 arch-btw kernel: audit: type=1103 audit(1597777921.629:18888): pid=2230894 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:12:01 arch-btw kernel: audit: type=1006 audit(1597777921.629:18889): pid=2230894 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2589 res=1
Aug 18 12:12:01 arch-btw kernel: audit: type=1300 audit(1597777921.629:18889): arch=c000003e syscall=1 success=yes exit=1 a0=3 a1=7ffc1d343ae0 a2=1 a3=7ffc1d3437f7 items=0 ppid=633 pid=2230894 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2589 comm="crond" exe="/usr/bin/crond" key=(null)
Aug 18 12:12:01 arch-btw kernel: audit: type=1327 audit(1597777921.629:18889): proctitle=2F7573722F62696E2F63726F6E64002D6E
Aug 18 12:12:01 arch-btw kernel: audit: type=1105 audit(1597777921.632:18890): pid=2230894 uid=0 auid=0 ses=2589 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:12:01 arch-btw kernel: audit: type=1110 audit(1597777921.632:18891): pid=2230894 uid=0 auid=0 ses=2589 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:12:01 arch-btw kernel: audit: type=1104 audit(1597777921.639:18892): pid=2230894 uid=0 auid=0 ses=2589 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
Aug 18 12:12:01 arch-btw kernel: audit: type=1106 audit(1597777921.639:18893): pid=2230894 uid=0 auid=0 ses=2589 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'Even though this issue did not start with a kernel update, I'll switch to the LTS kernel as suggested by the wiki.
Offline
#3 2020-08-19 15:16:44
- Lone_Wolf
- Administrator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 14,858
Re: New system freezing issue, but not sure if it's hardware or software
Try booting with
audit=0to get smaller logs.
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
clean chroot building not flexible enough ?
Try clean chroot manager by graysky
Offline