You are not logged in.

Pages: 1

#1 2020-08-15 17:28:44

FatalErrorDriveB
Member
Registered: 2020-08-15
Posts: 10

[Solved]Having trouble getting pscx2 running, can you help?

Solved:

sligress wrote:

I was having the same problem and found this solution posted https://www.reddit.com/r/PCSX2/comments … t_startup/

sudo pacman -U https://archive.archlinux.org/packages/ … pkg.tar.xz

*******
Hello, I'm trying to set up pcsx2 and have encountered an issue that I've recognized from other programs as well. Can you guys help me figure out what this means, or guide me in the right direction to fix this?

(PCSX2:28618): Gtk-WARNING **: 13:18:39.651: Unable to locate theme engine in module_path: "adwaita",

(PCSX2:28618): Gtk-WARNING **: 13:18:39.655: Unable to locate theme engine in module_path: "adwaita",
Interface is initializing.  Entering Pcsx2App::OnInit!
Applying operating system default language...
SetLanguage: 'English (U.S.)' [en_US] is not supported by the operating system
Command line parsing...
Command line parsed!
Segmentation fault (core dumped)

As far as I know I have English installed, as that's the only language I know and what the whole OS is using, so I'm not sure why I'm getting an error like this.

Also running a check for the adwita shows it installed.

pacman -Ss adwaita
extra/adwaita-icon-theme 3.36.1-1 [installed]
    GNOME standard icons

Can you guys help me with this?
Thanks so much for any help.

Last edited by FatalErrorDriveB (2020-08-16 11:39:51)

Offline

#2 2020-08-15 17:52:02

Slithery
Administrator
From: Norfolk, UK
Registered: 2013-12-01
Posts: 5,776

Re: [Solved]Having trouble getting pscx2 running, can you help?

FatalErrorDriveB wrote:
SetLanguage: 'English (U.S.)' [en_US] is not supported by the operating system

Pretty self explanatory, you just need to have en_US generated on your system...
https://wiki.archlinux.org/index.php/Locale

If you followed the installation guide properly this should already have been done...
https://wiki.archlinux.org/index.php/In … calization

No, it didn't "fix" anything. It just shifted the brokeness one space to the right. - jasonwryan
Closing -- for deletion; Banning -- for muppetry. - jasonwryan

aur - dotfiles

Offline

#3 2020-08-15 18:05:03

FatalErrorDriveB
Member
Registered: 2020-08-15
Posts: 10

Re: [Solved]Having trouble getting pscx2 running, can you help?

Slithery wrote:
FatalErrorDriveB wrote:
SetLanguage: 'English (U.S.)' [en_US] is not supported by the operating system

Pretty self explanatory, you just need to have en_US generated on your system...
https://wiki.archlinux.org/index.php/Locale

If you followed the installation guide properly this should already have been done...
https://wiki.archlinux.org/index.php/In … calization

Thank you, that solved my language issue! I did all the steps but forgot to run locale-gen.
That solved one issue. Now I only get this error:

(PCSX2:30016): Gtk-WARNING **: 14:01:17.133: Unable to locate theme engine in module_path: "adwaita",

(PCSX2:30016): Gtk-WARNING **: 14:01:17.136: Unable to locate theme engine in module_path: "adwaita",
Interface is initializing.  Entering Pcsx2App::OnInit!
Applying operating system default language...
Command line parsing...
Command line parsed!
Segmentation fault (core dumped)

Any ideas on solving this one?

Offline

#4 2020-08-15 19:10:14

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,475

Re: [Solved]Having trouble getting pscx2 running, can you help?

Post the contents of the dump https://wiki.archlinux.org/index.php/Co … _core_dump

Offline

#5 2020-08-15 19:17:46

FatalErrorDriveB
Member
Registered: 2020-08-15
Posts: 10

Re: [Solved]Having trouble getting pscx2 running, can you help?

V1del wrote:

Thank you for the info on how to do that. Here is the Core Dump:

PID: 6945 (PCSX2)
           UID: 1000 (fatal_error)
           GID: 985 (users)
        Signal: 11 (SEGV)
     Timestamp: Sat 2020-08-15 15:07:53 EDT (7min ago)
  Command Line: PCSX2
    Executable: /usr/bin/PCSX2
 Control Group: /user.slice/user-1000.slice/session-5.scope
          Unit: session-5.scope
         Slice: user-1000.slice
       Session: 5
     Owner UID: 1000 (fatal_error)
       Boot ID: fda443defec14e3db1a67a7381069ae0
    Machine ID: 48d7efb36a96440890880f6e1f08ce38
      Hostname: Brandon
       Storage: /var/lib/systemd/coredump/core.PCSX2.1000.fda443defec14e3db1a67a7381069ae0.6945.1597518473000000000000.zst
       Message: Process 6945 (PCSX2) of user 1000 dumped core.
                

                Stack trace of thread 6945:
                #0  0x00000000f68b531f pango_renderer_part_changed (libpango-1.0.so.0 + 0x2631f)
                #1  0x00000000f68b55e5 pango_renderer_set_alpha (libpango-1.0.so.0 + 0x265e5)
                #2  0x00000000f68b577f n/a (libpango-1.0.so.0 + 0x2677f)
                #3  0x00000000f7490d21 n/a (libgdk-x11-2.0.so.0 + 0x22d21)
                #4  0x00000000f68bcad1 pango_renderer_draw_layout_line (libpango-1.0.so.0 + 0x2dad1)
                #5  0x00000000f68bd68b pango_renderer_draw_layout (libpango-1.0.so.0 + 0x2e68b)
                #6  0x00000000f749151e gdk_draw_layout_with_colors (libgdk-x11-2.0.so.0 + 0x2351e)
                #7  0x00000000f74917b7 gdk_draw_layout (libgdk-x11-2.0.so.0 + 0x237b7)
                #8  0x00000000f71092e7 n/a (libgtk-x11-2.0.so.0 + 0x1a72e7)
                #9  0x00000000f7079c68 n/a (libgtk-x11-2.0.so.0 + 0x117c68)
                #10 0x00000000f7086b51 n/a (libgtk-x11-2.0.so.0 + 0x124b51)
                #11 0x00000000f7541ac6 g_closure_invoke (libgobject-2.0.so.0 + 0xeac6)
                #12 0x00000000f756aafb n/a (libgobject-2.0.so.0 + 0x37afb)
                #13 0x00000000f755dd5c g_signal_emit_valist (libgobject-2.0.so.0 + 0x2ad5c)
                #14 0x00000000f755e9b5 g_signal_emit (libgobject-2.0.so.0 + 0x2b9b5)
                #15 0x00000000f71b5c3d n/a (libgtk-x11-2.0.so.0 + 0x253c3d)
                #16 0x00000000f700238d gtk_container_propagate_expose (libgtk-x11-2.0.so.0 + 0xa038d)
                #17 0x00000000f70023b5 n/a (libgtk-x11-2.0.so.0 + 0xa03b5)
                #18 0x00000000f70009b0 gtk_container_forall (libgtk-x11-2.0.so.0 + 0x9e9b0)
                #19 0x00000000f7000c1d n/a (libgtk-x11-2.0.so.0 + 0x9ec1d)
                #20 0x00000000f6fd355c n/a (libgtk-x11-2.0.so.0 + 0x7155c)
                #21 0x00000000f7086b51 n/a (libgtk-x11-2.0.so.0 + 0x124b51)
                #22 0x00000000f7541ac6 g_closure_invoke (libgobject-2.0.so.0 + 0xeac6)
                #23 0x00000000f756aafb n/a (libgobject-2.0.so.0 + 0x37afb)
                #24 0x00000000f755dd5c g_signal_emit_valist (libgobject-2.0.so.0 + 0x2ad5c)
                #25 0x00000000f755e9b5 g_signal_emit (libgobject-2.0.so.0 + 0x2b9b5)
                #26 0x00000000f71b5c3d n/a (libgtk-x11-2.0.so.0 + 0x253c3d)
                #27 0x00000000f700238d gtk_container_propagate_expose (libgtk-x11-2.0.so.0 + 0xa038d)
                #28 0x00000000f70023b5 n/a (libgtk-x11-2.0.so.0 + 0xa03b5)
                #29 0x00000000f703d91d n/a (libgtk-x11-2.0.so.0 + 0xdb91d)
                #30 0x00000000f70009b0 gtk_container_forall (libgtk-x11-2.0.so.0 + 0x9e9b0)
                #31 0x00000000f7000c1d n/a (libgtk-x11-2.0.so.0 + 0x9ec1d)
                #32 0x00000000f7086b51 n/a (libgtk-x11-2.0.so.0 + 0x124b51)
                #33 0x00000000f7541ba6 g_closure_invoke (libgobject-2.0.so.0 + 0xeba6)
                #34 0x00000000f756aafb n/a (libgobject-2.0.so.0 + 0x37afb)
                #35 0x00000000f755dd5c g_signal_emit_valist (libgobject-2.0.so.0 + 0x2ad5c)
                #36 0x00000000f755e9b5 g_signal_emit (libgobject-2.0.so.0 + 0x2b9b5)
                #37 0x00000000f71b5c3d n/a (libgtk-x11-2.0.so.0 + 0x253c3d)
                #38 0x00000000f7084e8a gtk_main_do_event (libgtk-x11-2.0.so.0 + 0x122e8a)
                #39 0x00000000f74a980b n/a (libgdk-x11-2.0.so.0 + 0x3b80b)
                #40 0x00000000f74a97b7 n/a (libgdk-x11-2.0.so.0 + 0x3b7b7)
                #41 0x00000000f74a54fe n/a (libgdk-x11-2.0.so.0 + 0x374fe)
                #42 0x00000000f74a5fff gdk_window_process_all_updates (libgdk-x11-2.0.so.0 + 0x37fff)
                #43 0x00000000f7000805 n/a (libgtk-x11-2.0.so.0 + 0x9e805)
                #44 0x00000000f74812f7 n/a (libgdk-x11-2.0.so.0 + 0x132f7)
                #45 0x00000000f679bb45 g_main_context_dispatch (libglib-2.0.so.0 + 0x4db45)
                #46 0x00000000f67eac12 n/a (libglib-2.0.so.0 + 0x9cc12)
                #47 0x00000000f679a329 g_main_loop_run (libglib-2.0.so.0 + 0x4c329)
                #48 0x00000000f7083750 gtk_main (libgtk-x11-2.0.so.0 + 0x121750)
                #49 0x00000000f78b77f6 _ZN14wxGUIEventLoop5DoRunEv (libwx_gtk2u_core-3.0.so.0 + 0x18d7f6)
                #50 0x00000000f7d56932 _ZN15wxEventLoopBase3RunEv (libwx_baseu-3.0.so.0 + 0xa2932)
                #51 0x00000000f7932ca4 _ZN8wxDialog9ShowModalEv (libwx_gtk2u_core-3.0.so.0 + 0x208ca4)
                #52 0x00000000f769570d _ZN8wxWizard9RunWizardEP12wxWizardPage (libwx_gtk2u_adv-3.0.so.0 + 0x10570d)
                #53 0x000000005678c3c1 n/a (PCSX2 + 0x1fc3c1)
                #54 0x000000005678d0e8 n/a (PCSX2 + 0x1fd0e8)
                #55 0x0000000056792620 n/a (PCSX2 + 0x202620)
                #56 0x00000000f7d9d246 _Z7wxEntryRiPPw (libwx_baseu-3.0.so.0 + 0xe9246)
                #57 0x0000000056622f3d n/a (PCSX2 + 0x92f3d)
                #58 0x00000000f6a94efe __libc_start_main (libc.so.6 + 0x1eefe)
                #59 0x0000000056627f05 n/a (PCSX2 + 0

Offline

#6 2020-08-15 19:21:36

d_fajardo
Member
Registered: 2017-07-28
Posts: 1,653

Re: [Solved]Having trouble getting pscx2 running, can you help?

adwaita should be in the gtk3 package. Have you got that installed?

Offline

#7 2020-08-15 19:23:37

FatalErrorDriveB
Member
Registered: 2020-08-15
Posts: 10

Re: [Solved]Having trouble getting pscx2 running, can you help?

d_fajardo wrote:

adwaita should be in the gtk3 package. Have you got that installed?

Yes, I have installed GTK, GTK2, GTK-engines, lib32-gtk2, lib32gtk3, gnome-themes-extra, and adwaita-icon-theme

Edit: Someone on a different forum suggested I use the "ldd -r" and show the results so I'll post those here too in case someone can figure out what the issue may be from this.

dd -r /usr/bin/PCSX2
	linux-gate.so.1 (0xf7f29000)
	libwx_baseu-3.0.so.0 => /usr/lib32/libwx_baseu-3.0.so.0 (0xf52fb000)
	libwx_gtk2u_core-3.0.so.0 => /usr/lib32/libwx_gtk2u_core-3.0.so.0 (0xf4d71000)
	libwx_gtk2u_adv-3.0.so.0 => /usr/lib32/libwx_gtk2u_adv-3.0.so.0 (0xf4bd7000)
	libgobject-2.0.so.0 => /usr/lib32/libgobject-2.0.so.0 (0xf4b7a000)
	libgdk-x11-2.0.so.0 => /usr/lib32/libgdk-x11-2.0.so.0 (0xf4ab5000)
	libgtk-x11-2.0.so.0 => /usr/lib32/libgtk-x11-2.0.so.0 (0xf45a9000)
	libz.so.1 => /usr/lib32/libz.so.1 (0xf458f000)
	libaio.so.1 => /usr/lib32/libaio.so.1 (0xf458a000)
	libm.so.6 => /usr/lib32/libm.so.6 (0xf44bd000)
	libstdc++.so.6 => /usr/lib32/libstdc++.so.6 (0xf42ec000)
	libgcc_s.so.1 => /usr/lib32/libgcc_s.so.1 (0xf42ce000)
	libpthread.so.0 => /usr/lib32/libpthread.so.0 (0xf42a9000)
	libc.so.6 => /usr/lib32/libc.so.6 (0xf40bd000)
	libdl.so.2 => /usr/lib32/libdl.so.2 (0xf40b7000)
	libpangocairo-1.0.so.0 => /usr/lib32/libpangocairo-1.0.so.0 (0xf40a7000)
	libcairo.so.2 => /usr/lib32/libcairo.so.2 (0xf3f54000)
	libgdk_pixbuf-2.0.so.0 => /usr/lib32/libgdk_pixbuf-2.0.so.0 (0xf3f2b000)
	libpango-1.0.so.0 => /usr/lib32/libpango-1.0.so.0 (0xf3ed6000)
	libglib-2.0.so.0 => /usr/lib32/libglib-2.0.so.0 (0xf3d95000)
	libX11.so.6 => /usr/lib32/libX11.so.6 (0xf3c46000)
	libXxf86vm.so.1 => /usr/lib32/libXxf86vm.so.1 (0xf3c3f000)
	libSM.so.6 => /usr/lib32/libSM.so.6 (0xf3c33000)
	libpng16.so.16 => /usr/lib32/libpng16.so.16 (0xf3bf4000)
	libjpeg.so.8 => /usr/lib32/libjpeg.so.8 (0xf3b4c000)
	libtiff.so.5 => /usr/lib32/libtiff.so.5 (0xf3ac6000)
	libffi.so.7 => /usr/lib32/libffi.so.7 (0xf3abb000)
	libgio-2.0.so.0 => /usr/lib32/libgio-2.0.so.0 (0xf38c0000)
	libfontconfig.so.1 => /usr/lib32/libfontconfig.so.1 (0xf3870000)
	libXrender.so.1 => /usr/lib32/libXrender.so.1 (0xf3862000)
	libXinerama.so.1 => /usr/lib32/libXinerama.so.1 (0xf385d000)
	libXi.so.6 => /usr/lib32/libXi.so.6 (0xf3849000)
	libXrandr.so.2 => /usr/lib32/libXrandr.so.2 (0xf383a000)
	libXcursor.so.1 => /usr/lib32/libXcursor.so.1 (0xf382b000)
	libXcomposite.so.1 => /usr/lib32/libXcomposite.so.1 (0xf3826000)
	libXdamage.so.1 => /usr/lib32/libXdamage.so.1 (0xf3821000)
	libXfixes.so.3 => /usr/lib32/libXfixes.so.3 (0xf3819000)
	libXext.so.6 => /usr/lib32/libXext.so.6 (0xf3803000)
	libgmodule-2.0.so.0 => /usr/lib32/libgmodule-2.0.so.0 (0xf37fd000)
	libatk-1.0.so.0 => /usr/lib32/libatk-1.0.so.0 (0xf37d4000)
	libpangoft2-1.0.so.0 => /usr/lib32/libpangoft2-1.0.so.0 (0xf37bb000)
	/lib/ld-linux.so.2 => /usr/lib/ld-linux.so.2 (0xf7f2a000)
	libpixman-1.so.0 => /usr/lib32/libpixman-1.so.0 (0xf370a000)
	libfreetype.so.6 => /usr/lib32/libfreetype.so.6 (0xf3632000)
	libxcb-shm.so.0 => /usr/lib32/libxcb-shm.so.0 (0xf362d000)
	libxcb.so.1 => /usr/lib32/libxcb.so.1 (0xf35ff000)
	libxcb-render.so.0 => /usr/lib32/libxcb-render.so.0 (0xf35ef000)
	libfribidi.so.0 => /usr/lib32/libfribidi.so.0 (0xf35d1000)
	libthai.so.0 => /usr/lib32/libthai.so.0 (0xf35c5000)
	libharfbuzz.so.0 => /usr/lib32/libharfbuzz.so.0 (0xf34ed000)
	libpcre.so.1 => /usr/lib32/libpcre.so.1 (0xf3476000)
	libICE.so.6 => /usr/lib32/libICE.so.6 (0xf345a000)
	libuuid.so.1 => /usr/lib32/libuuid.so.1 (0xf3450000)
	libzstd.so.1 => /usr/lib32/libzstd.so.1 (0xf337b000)
	liblzma.so.5 => /usr/lib32/liblzma.so.5 (0xf334f000)
	libmount.so.1 => /usr/lib32/libmount.so.1 (0xf32e3000)
	libresolv.so.2 => /usr/lib32/libresolv.so.2 (0xf32c9000)
	libexpat.so.1 => /usr/lib32/libexpat.so.1 (0xf329d000)
	libbz2.so.1.0 => /usr/lib32/libbz2.so.1.0 (0xf328b000)
	libXau.so.6 => /usr/lib32/libXau.so.6 (0xf3286000)
	libXdmcp.so.6 => /usr/lib32/libXdmcp.so.6 (0xf327e000)
	libdatrie.so.1 => /usr/lib32/libdatrie.so.1 (0xf3275000)
	libblkid.so.1 => /usr/lib32/libblkid.so.1 (0xf321a000)
	librt.so.1 => /usr/lib32/librt.so.1 (0xf320f000)

Last edited by FatalErrorDriveB (2020-08-15 22:38:24)

Offline

#8 2020-08-16 04:42:10

sligress
Member
Registered: 2020-08-16
Posts: 1

Re: [Solved]Having trouble getting pscx2 running, can you help?

I was having the same problem and found this solution posted https://www.reddit.com/r/PCSX2/comments … t_startup/

sudo pacman -U https://archive.archlinux.org/packages/ … pkg.tar.xz

Offline

#9 2020-08-16 11:26:16

Irets
Member
Registered: 2019-02-01
Posts: 143

Re: [Solved]Having trouble getting pscx2 running, can you help?

sligress wrote:

I was having the same problem and found this solution posted https://www.reddit.com/r/PCSX2/comments … t_startup/

sudo pacman -U https://archive.archlinux.org/packages/ … pkg.tar.xz

This temporary workaround seems to work for me too.
My PCSX2 dumped core when I interacted with the buttons in the top bar of the application.
Hopefully a proper fix is on it's way.

Offline

#10 2020-08-16 11:36:14

FatalErrorDriveB
Member
Registered: 2020-08-15
Posts: 10

Re: [Solved]Having trouble getting pscx2 running, can you help?

sligress wrote:

I was having the same problem and found this solution posted https://www.reddit.com/r/PCSX2/comments … t_startup/

sudo pacman -U https://archive.archlinux.org/packages/ … pkg.tar.xz

This seems to have fixed things, thank you!

Offline

Pages: 1

Board footer

Powered by FluxBB