You are not logged in.
- Topics: Active | Unanswered
#1 2020-08-31 12:41:00
- dundee
- Member
- Registered: 2010-09-05
- Posts: 16
(SOLVED) Two kworkers at 100% cpu usage
Hi,
after last updates I have two cpu cores running 100% all the time. Restart doesn't help. I tried running LTS kernel and downgraded systemd (245.7-1) but without any progress.
Any ideas what could have gone wrong?
Top:
Tasks: 283 total, 5 running, 278 sleeping, 0 stopped, 0 zombie
%Cpu(s): 3,1 us, 41,5 sy, 0,0 ni, 43,1 id, 0,0 wa, 1,5 hi, 10,8 si, 0,0 st
MiB Mem : 15901,4 total, 5632,4 free, 4163,3 used, 6105,7 buff/cache
MiB Swap: 0,0 total, 0,0 free, 0,0 used. 10740,3 avail Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
37 root 20 0 0 0 0 R 75,0 0,0 89:01.91 kworker/3:1+pm
5646 root 20 0 0 0 0 R 75,0 0,0 57:50.54 kworker/2:0+pm
24 root 20 0 0 0 0 S 25,0 0,0 17:08.22 ksoftirqd/2
30 root 20 0 0 0 0 R 25,0 0,0 25:41.94 ksoftirqd/3
1537 dundee 20 0 4559316 276576 150524 S 6,2 1,7 3:43.70 gnome-shell
2812 dundee 20 0 506096 82672 48616 S 6,2 0,5 0:14.11 guake
16925 dundee 20 0 4715584 239784 121164 S 6,2 1,5 0:37.44 chrome
1 root 20 0 175440 11944 8744 S 0,0 0,1 0:03.70 systemd
2 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kthreaddPerf:
- 40,85% 0,00% kworker/3:1+pm [kernel.kallsyms] [k] ret_from_fork ◆
ret_from_fork ▒
kthread ▒
- worker_thread ▒
- 40,85% process_one_work ▒
- 38,15% pm_runtime_work ▒
- 38,14% rpm_idle ▒
- 38,13% __rpm_callback ▒
- 38,12% usb_runtime_idle ▒
- 38,10% __pm_runtime_suspend ▒
- 38,09% rpm_suspend ▒
- 38,01% rpm_callback ▒
- __rpm_callback ▒
- 38,00% usb_runtime_suspend ▒
- 37,96% usb_suspend_both ▒
- 21,12% hub_suspend ▒
- 20,67% usb_control_msg ▒
- 20,38% usb_start_wait_urb ▒
- 19,01% usb_hcd_submit_urb ▒
6,70% drm_atomic_helper_duplicate_state ▒
5,47% devm_hwrng_register ▒
3,32% hwrng_register ▒
+ 2,11% xhci_hub_control ▒
+ 0,84% __tasklet_schedule ▒
+ 1,17% __wait_for_common ▒
+ 12,20% usb_resume_interface.part.0.isra.0 ▒
+ 4,62% generic_suspend ▒
+ 2,66% hub_event ▒
+ 40,85% 0,00% kworker/3:1+pm [kernel.kallsyms] [k] kthread ▒
+ 40,85% 0,01% kworker/3:1+pm [kernel.kallsyms] [k] worker_thread ▒
+ 40,85% 0,02% kworker/3:1+pm [kernel.kallsyms] [k] process_one_work ▒
+ 40,45% 0,00% kworker/2:0+pm [kernel.kallsyms] [k] ret_from_fork ▒
+ 40,45% 0,00% kworker/2:0+pm [kernel.kallsyms] [k] kthread ▒
+ 40,45% 0,00% kworker/2:0+pm [kernel.kallsyms] [k] worker_thread ▒
+ 40,45% 0,02% kworker/2:0+pm [kernel.kallsyms] [k] process_one_work ▒
+ 38,31% 0,03% kworker/2:0+pm [kernel.kallsyms] [k] rpm_suspend ▒
+ 38,26% 0,02% kworker/2:0+pm [kernel.kallsyms] [k] rpm_idle ▒
+ 38,23% 0,01% kworker/2:0+pm [kernel.kallsyms] [k] __rpm_callback ▒
+ 38,23% 0,00% kworker/2:0+pm [kernel.kallsyms] [k] pm_runtime_work ▒
+ 38,19% 0,01% kworker/2:0+pm [kernel.kallsyms] [k] usb_runtime_idle ▒
+ 38,18% 0,02% kworker/3:1+pm [kernel.kallsyms] [k] rpm_suspend ▒
+ 38,18% 0,00% kworker/2:0+pm [kernel.kallsyms] [k] __pm_runtime_suspend ▒
+ 38,17% 0,00% kworker/3:1+pm [kernel.kallsyms] [k] rpm_idle ▒
+ 38,15% 0,00% kworker/3:1+pm [kernel.kallsyms] [k] pm_runtime_work ▒
+ 38,13% 0,01% kworker/3:1+pm [kernel.kallsyms] [k] __rpm_callback ▒
+ 38,12% 0,00% kworker/3:1+pm [kernel.kallsyms] [k] usb_runtime_idle ▒
+ 38,11% 0,00% kworker/2:0+pm [kernel.kallsyms] [k] rpm_callback ▒
+ 38,10% 0,00% kworker/3:1+pm [kernel.kallsyms] [k] __pm_runtime_suspend ▒
+ 38,07% 0,01% kworker/2:0+pm [kernel.kallsyms] [k] usb_runtime_suspend ▒
+ 38,05% 0,02% kworker/2:0+pm [kernel.kallsyms] [k] usb_suspend_both ▒
+ 38,01% 0,00% kworker/3:1+pm [kernel.kallsyms] [k] rpm_callback ▒
+ 38,00% 0,01% kworker/3:1+pm [kernel.kallsyms] [k] usb_runtime_suspend ▒
+ 37,96% 0,02% kworker/3:1+pm [kernel.kallsyms] [k] usb_suspend_both ▒
+ 34,73% 0,11% kworker/3:1+pm [kernel.kallsyms] [k] usb_control_msg ▒
+ 34,02% 0,09% kworker/3:1+pm [kernel.kallsyms] [k] usb_start_wait_urb ▒
+ 32,54% 0,14% kworker/2:0+pm [kernel.kallsyms] [k] hub_ext_port_statusSysRq backtrace:
[ 5981.488874] NMI backtrace for cpu 1
[ 5981.488877] CPU: 1 PID: 15826 Comm: bash Not tainted 5.4.61-1-lts #1
[ 5981.488877] Hardware name: LENOVO 20J1003EMC/20J1003EMC, BIOS R0JET28W (1.13 ) 09/05/2017
[ 5981.488878] Call Trace:
[ 5981.488886] dump_stack+0x64/0x88
[ 5981.488888] nmi_cpu_backtrace.cold+0x14/0x53
[ 5981.488892] ? lapic_can_unplug_cpu.cold+0x3e/0x3e
[ 5981.488893] nmi_trigger_cpumask_backtrace+0xd5/0xd7
[ 5981.488896] __handle_sysrq.cold+0x43/0x101
[ 5981.488899] write_sysrq_trigger+0x24/0x40
[ 5981.488901] proc_reg_write+0x3e/0x80
[ 5981.488903] vfs_write+0xb6/0x1a0
[ 5981.488905] ksys_write+0x67/0xe0
[ 5981.488908] do_syscall_64+0x49/0x90
[ 5981.488910] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 5981.488913] RIP: 0033:0x7f5d94ba4f67
[ 5981.488915] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[ 5981.488916] RSP: 002b:00007fffcfa2b5b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 5981.488917] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5d94ba4f67
[ 5981.488918] RDX: 0000000000000002 RSI: 00005639324db910 RDI: 0000000000000001
[ 5981.488918] RBP: 00005639324db910 R08: 000000000000000a R09: 00007f5d94c3b0c0
[ 5981.488919] R10: 00007f5d94c3afc0 R11: 0000000000000246 R12: 0000000000000002
[ 5981.488920] R13: 00007f5d94c77520 R14: 0000000000000002 R15: 00007f5d94c77720
[ 5981.488922] Sending NMI from CPU 1 to CPUs 0,2-3:
[ 5981.488960] NMI backtrace for cpu 0
[ 5981.488961] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.61-1-lts #1
[ 5981.488961] Hardware name: LENOVO 20J1003EMC/20J1003EMC, BIOS R0JET28W (1.13 ) 09/05/2017
[ 5981.488962] RIP: 0010:mwait_idle_with_hints.constprop.0+0x4b/0x90
[ 5981.488963] Code: 65 48 8b 04 25 c0 6b 01 00 0f 01 c8 48 8b 00 a8 08 75 17 e9 07 00 00 00 0f 00 2d a0 2e 96 00 b9 01 00 00 00 48 89 f8 0f 01 c9 <65> 48 8b 04 25 c0 6b 01 00 f0 80 60 02 df f0 83 44 24 fc 00 48 8b
[ 5981.488963] RSP: 0018:ffffffff8c203e48 EFLAGS: 00000046
[ 5981.488965] RAX: 0000000000000020 RBX: ffffffff8c2bbbe0 RCX: 0000000000000001
[ 5981.488965] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000020
[ 5981.488965] RBP: 0000000000000020 R08: 0000000000000000 R09: 000000000c20a000
[ 5981.488966] R10: 00000000000006b7 R11: ffff9fa78f2292c0 R12: 0000000000000004
[ 5981.488967] R13: ffffffff8c2bbd60 R14: ffffffff8c2bbd78 R15: 00000570ac8377d4
[ 5981.488967] FS: 0000000000000000(0000) GS:ffff9fa78f200000(0000) knlGS:0000000000000000
[ 5981.488968] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5981.488968] CR2: 00007fe873b5a000 CR3: 00000003fa60a001 CR4: 00000000003606f0
[ 5981.488968] Call Trace:
[ 5981.488969] intel_idle+0x3b/0xa0
[ 5981.488969] cpuidle_enter_state+0xb4/0x400
[ 5981.488969] cpuidle_enter+0x29/0x40
[ 5981.488970] do_idle+0x1c4/0x240
[ 5981.488970] cpu_startup_entry+0x19/0x20
[ 5981.488971] start_kernel+0x536/0x556
[ 5981.488971] secondary_startup_64+0xb6/0xc0
[ 5981.488998] NMI backtrace for cpu 3
[ 5981.488998] CPU: 3 PID: 37 Comm: kworker/3:1 Not tainted 5.4.61-1-lts #1
[ 5981.488999] Hardware name: LENOVO 20J1003EMC/20J1003EMC, BIOS R0JET28W (1.13 ) 09/05/2017
[ 5981.488999] Workqueue: pm pm_runtime_work
[ 5981.489000] RIP: 0010:check_preempt_wakeup+0x10e/0x250
[ 5981.489001] Code: 48 85 ff 74 dd 89 0c 24 e8 bf f7 ff ff 48 85 ed 8b 0c 24 0f 84 2a 01 00 00 4c 8b 43 58 4c 2b 45 58 4d 85 c0 0f 8e a0 00 00 00 <48> 81 7d 00 00 00 10 00 8b 3d bc 36 18 01 0f 85 07 01 00 00 49 39
[ 5981.489001] RSP: 0018:ffffa30a801af9d8 EFLAGS: 00000002
[ 5981.489002] RAX: 0000056fcbdee06f RBX: ffff9fa78c8a8080 RCX: 0000000000000000
[ 5981.489002] RDX: 0000000000000000 RSI: ffff9fa78cf79e80 RDI: ffff9fa78f3aa600
[ 5981.489002] RBP: ffff9fa78cf79f00 R08: 0000000000895440 R09: ffff9fa78f3aa638
[ 5981.489003] R10: 0000000000000400 R11: 0000000000002400 R12: ffff9fa78c8a8000
[ 5981.489003] R13: ffff9fa78f3aa500 R14: 0000000000000008 R15: 0000000000000002
[ 5981.489004] FS: 0000000000000000(0000) GS:ffff9fa78f380000(0000) knlGS:0000000000000000
[ 5981.489004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5981.489004] CR2: 000055b1b1689000 CR3: 00000003f23ba004 CR4: 00000000003606e0
[ 5981.489005] Call Trace:
[ 5981.489005] check_preempt_curr+0x67/0x90
[ 5981.489005] ttwu_do_wakeup+0x19/0x140
[ 5981.489005] try_to_wake_up+0x254/0x720
[ 5981.489006] ? __switch_to_asm+0x34/0x70
[ 5981.489006] __tasklet_schedule+0xbb/0xc0
[ 5981.489006] usb_hcd_submit_urb+0x27c/0xc10
[ 5981.489007] ? lock_timer_base.constprop.0+0x61/0x80
[ 5981.489007] ? usb_submit_urb+0x22e/0x5a0
[ 5981.489007] ? del_timer_sync+0x6f/0xb0
[ 5981.489008] usb_start_wait_urb+0x8a/0x190
[ 5981.489008] usb_control_msg+0xe7/0x150
[ 5981.489008] hub_suspend+0x20c/0x250
[ 5981.489008] ? __queue_work+0x1e2/0x400
[ 5981.489009] usb_suspend_both+0xa6/0x210
[ 5981.489009] usb_runtime_suspend+0x2b/0x70
[ 5981.489009] ? usb_autoresume_device+0x50/0x50
[ 5981.489010] ? usb_autoresume_device+0x50/0x50
[ 5981.489010] __rpm_callback+0x81/0x140
[ 5981.489010] ? usb_autoresume_device+0x50/0x50
[ 5981.489010] rpm_callback+0x1f/0x70
[ 5981.489011] ? usb_autoresume_device+0x50/0x50
[ 5981.489011] rpm_suspend+0x174/0x6b0
[ 5981.489011] ? usb_runtime_resume+0x20/0x20
[ 5981.489012] __pm_runtime_suspend+0x3d/0x70
[ 5981.489012] usb_runtime_idle+0x2d/0x40
[ 5981.489012] __rpm_callback+0x81/0x140
[ 5981.489012] rpm_idle+0xa2/0x300
[ 5981.489013] pm_runtime_work+0x82/0x90
[ 5981.489013] process_one_work+0x1ea/0x3a0
[ 5981.489013] worker_thread+0x50/0x410
[ 5981.489013] ? process_one_work+0x3a0/0x3a0
[ 5981.489014] kthread+0x117/0x130
[ 5981.489014] ? __kthread_bind_mask+0x60/0x60
[ 5981.489014] ret_from_fork+0x35/0x40
[ 5981.489015] NMI backtrace for cpu 2
[ 5981.489016] CPU: 2 PID: 5646 Comm: kworker/2:0 Not tainted 5.4.61-1-lts #1
[ 5981.489016] Hardware name: LENOVO 20J1003EMC/20J1003EMC, BIOS R0JET28W (1.13 ) 09/05/2017
[ 5981.489017] Workqueue: pm pm_runtime_work
[ 5981.489017] RIP: 0010:xhci_hub_control+0x287/0x2260 [xhci_hcd]
[ 5981.489018] Code: 24 10 0f 8f a3 fe ff ff 8d 4b ff 48 8b 5c 24 20 0f b7 c1 48 89 44 24 30 48 8d 04 c3 48 89 44 24 20 48 8b 00 48 8b 00 44 8b 30 <41> 83 fe ff 0f 84 e4 07 00 00 0f 1f 44 00 00 0f b7 c1 89 44 24 10
[ 5981.489019] RSP: 0018:ffffa30a838db960 EFLAGS: 00000093
[ 5981.489019] RAX: ffffa30a803f04a0 RBX: ffff9fa78c50cea0 RCX: 0000000000000002
[ 5981.489020] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9fa78cbfa2ac
[ 5981.489020] RBP: ffff9fa78cbfa000 R08: 0000000000000297 R09: 0000000000000004
[ 5981.489020] R10: 000000000000a300 R11: 0000000000000004 R12: ffff9fa78cbfac70
[ 5981.489021] R13: ffff9fa78cbfa2ac R14: 0000000000000e63 R15: ffff9fa78cbfa000
[ 5981.489021] FS: 0000000000000000(0000) GS:ffff9fa78f300000(0000) knlGS:0000000000000000
[ 5981.489022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5981.489022] CR2: 0000561adfbf1a30 CR3: 0000000407400003 CR4: 00000000003606e0
[ 5981.489022] Call Trace:
[ 5981.489023] ? lock_timer_base.constprop.0+0x61/0x80
[ 5981.489023] ? __kmalloc+0x170/0x230
[ 5981.489023] usb_hcd_submit_urb+0x851/0xc10
[ 5981.489024] ? __wait_for_common+0xf5/0x1a0
[ 5981.489024] ? usb_start_wait_urb+0xc7/0x190
[ 5981.489026] ? usb_submit_urb+0x22e/0x5a0
[ 5981.489026] ? kfree+0xc4/0x230
[ 5981.489027] usb_start_wait_urb+0x8a/0x190
[ 5981.489027] usb_control_msg+0xe7/0x150
[ 5981.489027] hub_ext_port_status+0x87/0x110
[ 5981.489028] hub_activate+0x16b/0x7c0
[ 5981.489028] hub_resume+0x36/0x100
[ 5981.489028] usb_resume_interface.part.0.isra.0+0x73/0xb0
[ 5981.489028] usb_suspend_both+0xf6/0x210
[ 5981.489029] usb_runtime_suspend+0x2b/0x70
[ 5981.489029] ? usb_autoresume_device+0x50/0x50
[ 5981.489029] ? usb_autoresume_device+0x50/0x50
[ 5981.489030] __rpm_callback+0x81/0x140
[ 5981.489030] ? usb_autoresume_device+0x50/0x50
[ 5981.489030] rpm_callback+0x1f/0x70
[ 5981.489031] ? usb_autoresume_device+0x50/0x50
[ 5981.489031] rpm_suspend+0x174/0x6b0
[ 5981.489031] ? usb_runtime_resume+0x20/0x20
[ 5981.489032] __pm_runtime_suspend+0x3d/0x70
[ 5981.489032] usb_runtime_idle+0x2d/0x40
[ 5981.489032] __rpm_callback+0x81/0x140
[ 5981.489033] rpm_idle+0xa2/0x300
[ 5981.489033] pm_runtime_work+0x82/0x90
[ 5981.489033] process_one_work+0x1ea/0x3a0
[ 5981.489034] worker_thread+0x50/0x410
[ 5981.489034] ? process_one_work+0x3a0/0x3a0
[ 5981.489034] kthread+0x117/0x130
[ 5981.489035] ? __kthread_bind_mask+0x60/0x60
[ 5981.489035] ret_from_fork+0x35/0x40Dmesg:
[ 0.012299] No NUMA configuration found
[ 0.012300] Faking a node at [mem 0x0000000000000000-0x000000041f7fffff]
[ 0.012307] NODE_DATA(0) allocated [mem 0x41f7fc000-0x41f7fffff]
[ 0.012339] Zone ranges:
[ 0.012340] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012341] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.012342] Normal [mem 0x0000000100000000-0x000000041f7fffff]
[ 0.012343] Device empty
[ 0.012343] Movable zone start for each node
[ 0.012344] Early memory node ranges
[ 0.012345] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.012346] node 0: [mem 0x0000000000059000-0x000000000008bfff]
[ 0.012346] node 0: [mem 0x0000000000100000-0x00000000ce464fff]
[ 0.012347] node 0: [mem 0x00000000ce467000-0x00000000d9592fff]
[ 0.012348] node 0: [mem 0x00000000db4ff000-0x00000000db4fffff]
[ 0.012348] node 0: [mem 0x0000000100000000-0x000000041f7fffff]
[ 0.012553] Zeroed struct page in unavailable ranges: 29412 pages
[ 0.012555] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f7fffff]
[ 0.012556] On node 0 totalpages: 4164892
[ 0.012557] DMA zone: 64 pages used for memmap
[ 0.012558] DMA zone: 71 pages reserved
[ 0.012559] DMA zone: 3978 pages, LIFO batch:0
[ 0.012612] DMA32 zone: 13847 pages used for memmap
[ 0.012613] DMA32 zone: 886162 pages, LIFO batch:63
[ 0.025155] Normal zone: 51168 pages used for memmap
[ 0.025156] Normal zone: 3274752 pages, LIFO batch:63
[ 0.066461] Reserving Intel graphics memory at [mem 0xdd800000-0xdf7fffff]
[ 0.066671] ACPI: PM-Timer IO Port: 0x1808
[ 0.066672] ACPI: Local APIC address 0xfee00000
[ 0.066678] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.066679] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.066679] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.066680] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.066680] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.066681] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.066681] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.066682] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.066713] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.066715] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.066716] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.066717] ACPI: IRQ0 used by override.
[ 0.066718] ACPI: IRQ9 used by override.
[ 0.066720] Using ACPI (MADT) for SMP configuration information
[ 0.066721] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.066724] TSC deadline timer available
[ 0.066725] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.066740] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.066741] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.066742] PM: Registered nosave memory: [mem 0x0008c000-0x000fffff]
[ 0.066744] PM: Registered nosave memory: [mem 0xca135000-0xca135fff]
[ 0.066745] PM: Registered nosave memory: [mem 0xca145000-0xca145fff]
[ 0.066746] PM: Registered nosave memory: [mem 0xce465000-0xce465fff]
[ 0.066747] PM: Registered nosave memory: [mem 0xce466000-0xce466fff]
[ 0.066748] PM: Registered nosave memory: [mem 0xd9593000-0xdb352fff]
[ 0.066749] PM: Registered nosave memory: [mem 0xdb353000-0xdb4a2fff]
[ 0.066749] PM: Registered nosave memory: [mem 0xdb4a3000-0xdb4fefff]
[ 0.066750] PM: Registered nosave memory: [mem 0xdb500000-0xdf7fffff]
[ 0.066751] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[ 0.066751] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.066752] PM: Registered nosave memory: [mem 0xfc000000-0xfe00ffff]
[ 0.066752] PM: Registered nosave memory: [mem 0xfe010000-0xfe010fff]
[ 0.066753] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
[ 0.066754] [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.066756] Booting paravirtualized kernel on bare hardware
[ 0.066759] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.169635] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[ 0.169804] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.169811] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.169812] pcpu-alloc: [0] 0 1 2 3
[ 0.169850] Built 1 zonelists, mobility grouping on. Total pages: 4099742
[ 0.169851] Policy zone: Normal
[ 0.169852] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux-lts.img cryptdevice=/dev/disk/by-uuid/b85d1a77-c25d-4494-b878-76b8e3a1dd67:ssd:allow-discards root=/dev/mapper/ssd-root vsyscall=emulate quiet rw
[ 0.170817] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.171265] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.171313] mem auto-init: stack:byref_all, heap alloc:on, heap free:off
[ 0.174903] Calgary: detecting Calgary via BIOS EBDA area
[ 0.174905] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.214669] Memory: 16187992K/16659568K available (12291K kernel code, 1326K rwdata, 4008K rodata, 1712K init, 3396K bss, 471576K reserved, 0K cma-reserved)
[ 0.214675] random: get_random_u64 called from __kmem_cache_create+0x3e/0x610 with crng_init=0
[ 0.214806] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.214820] Kernel/User page tables isolation: enabled
[ 0.214835] ftrace: allocating 37479 entries in 147 pages
[ 0.229890] rcu: Hierarchical RCU implementation.
[ 0.229892] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.229893] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.229894] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.232696] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 16
[ 0.233304] Console: colour dummy device 80x25
[ 0.233308] printk: console [tty0] enabled
[ 0.233322] ACPI: Core revision 20190816
[ 0.233610] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.233683] APIC: Switch to symmetric I/O mode setup
[ 0.233685] DMAR: Host address width 39
[ 0.233686] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.233693] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.233694] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.233698] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.233699] DMAR: RMRR base: 0x000000da8cf000 end: 0x000000da8eefff
[ 0.233699] DMAR: RMRR base: 0x000000dd000000 end: 0x000000df7fffff
[ 0.233701] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.233702] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.233703] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.233704] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.235308] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.235310] x2apic enabled
[ 0.235324] Switched APIC routing to cluster x2apic.
[ 0.239413] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.283880] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26eae8729ef, max_idle_ns: 440795235156 ns
[ 0.283885] Calibrating delay loop (skipped), value calculated using timer frequency.. 5399.81 BogoMIPS (lpj=26999090)
[ 0.283887] pid_max: default: 32768 minimum: 301
[ 0.286625] LSM: Security Framework initializing
[ 0.286629] Yama: becoming mindful.
[ 0.286673] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.286698] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.286709] *** VALIDATE tmpfs ***
[ 0.286842] *** VALIDATE proc ***
[ 0.286887] *** VALIDATE cgroup1 ***
[ 0.286888] *** VALIDATE cgroup2 ***
[ 0.286963] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.286982] process: using mwait in idle threads
[ 0.286985] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.286986] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.286989] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.286991] Spectre V2 : Mitigation: Full generic retpoline
[ 0.286991] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.286992] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.286993] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.286994] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.286995] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.287000] SRBDS: Mitigation: Microcode
[ 0.287000] MDS: Mitigation: Clear CPU buffers
[ 0.287322] Freeing SMP alternatives memory: 32K
[ 0.289784] smpboot: CPU0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.289865] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.289872] ... version: 4
[ 0.289872] ... bit width: 48
[ 0.289873] ... generic registers: 4
[ 0.289874] ... value mask: 0000ffffffffffff
[ 0.289874] ... max period: 00007fffffffffff
[ 0.289875] ... fixed-purpose events: 3
[ 0.289875] ... event mask: 000000070000000f
[ 0.289915] rcu: Hierarchical SRCU implementation.
[ 0.290575] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.290623] smp: Bringing up secondary CPUs ...
[ 0.290715] x86: Booting SMP configuration:
[ 0.290716] .... node #0, CPUs: #1
[ 0.000868] [Firmware Bug]: TSC ADJUST differs within socket(s), fixing all errors
[ 0.293761] #2
[ 0.293761] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.293761] #3
[ 0.293761] smp: Brought up 1 node, 4 CPUs
[ 0.293761] smpboot: Max logical packages: 1
[ 0.293761] smpboot: Total of 4 processors activated (21599.27 BogoMIPS)
[ 0.293761] devtmpfs: initialized
[ 0.293761] x86/mm: Memory block size: 128MB
[ 0.293761] PM: Registering ACPI NVS region [mem 0xce465000-0xce465fff] (4096 bytes)
[ 0.293761] PM: Registering ACPI NVS region [mem 0xdb353000-0xdb4a2fff] (1376256 bytes)
[ 0.293761] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.293761] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.293761] pinctrl core: initialized pinctrl subsystem
[ 0.293761] PM: RTC time: 10:41:47, date: 2020-08-31
[ 0.293761] NET: Registered protocol family 16
[ 0.293761] audit: initializing netlink subsys (disabled)
[ 0.293761] audit: type=2000 audit(1598870506.060:1): state=initialized audit_enabled=0 res=1
[ 0.293761] cpuidle: using governor ladder
[ 0.293761] cpuidle: using governor menu
[ 0.293761] Simple Boot Flag at 0x47 set to 0x1
[ 0.293761] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.293761] ACPI: bus type PCI registered
[ 0.293761] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.293761] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.293761] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.293761] PCI: Using configuration type 1 for base access
[ 0.293892] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.294696] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.294696] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.294696] ACPI: Added _OSI(Module Device)
[ 0.294696] ACPI: Added _OSI(Processor Device)
[ 0.294696] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.294696] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.294696] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.294696] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.294696] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.347967] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.347971] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.354217] ACPI: Dynamic OEM Table Load:
[ 0.354228] ACPI: SSDT 0xFFFF9FA78CABB000 0006B4 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.355554] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.355638] ACPI: Dynamic OEM Table Load:
[ 0.355645] ACPI: SSDT 0xFFFF9FA78CFE3400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.357232] ACPI: Dynamic OEM Table Load:
[ 0.357237] ACPI: SSDT 0xFFFF9FA78C948A00 000115 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ 0.358626] ACPI: Dynamic OEM Table Load:
[ 0.358630] ACPI: SSDT 0xFFFF9FA78C949800 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ 0.364381] ACPI: Dynamic OEM Table Load:
[ 0.364388] ACPI: SSDT 0xFFFF9FA78CABF800 00065C (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.366120] ACPI: Dynamic OEM Table Load:
[ 0.366120] ACPI: SSDT 0xFFFF9FA78CFD6E00 000197 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 0.366123] ACPI: Dynamic OEM Table Load:
[ 0.366123] ACPI: SSDT 0xFFFF9FA78C948C00 00018A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 0.366170] ACPI: EC: EC started
[ 0.366170] ACPI: EC: interrupt blocked
[ 0.367216] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.367216] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.367216] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[ 0.367216] ACPI: Interpreter enabled
[ 0.367216] ACPI: (supports S0 S3 S4 S5)
[ 0.367216] ACPI: Using IOAPIC for interrupt routing
[ 0.367216] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.374197] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.379377] ACPI: Power Resource [WRST] (on)
[ 0.404358] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.404365] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.408049] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.408050] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.410870] PCI host bridge to bus 0000:00
[ 0.410872] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.410873] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.410874] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.410875] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xf7ffffff window]
[ 0.410876] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.410877] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.410889] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[ 0.412134] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[ 0.412147] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf0ffffff 64bit]
[ 0.412153] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.412158] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe03f]
[ 0.412176] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.413231] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.413252] pci 0000:00:14.0: reg 0x10: [mem 0xf1220000-0xf122ffff 64bit]
[ 0.413319] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.414430] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.414452] pci 0000:00:14.2: reg 0x10: [mem 0xf1248000-0xf1248fff 64bit]
[ 0.415562] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.415752] pci 0000:00:15.0: reg 0x10: [mem 0xf1249000-0xf1249fff 64bit]
[ 0.417540] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.417566] pci 0000:00:16.0: reg 0x10: [mem 0xf124a000-0xf124afff 64bit]
[ 0.417632] pci 0000:00:16.0: PME# supported from D3hot
[ 0.418711] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.418800] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.419879] pci 0000:00:1c.3: [8086:9d13] type 01 class 0x060400
[ 0.419964] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.421031] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 0.421119] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.422202] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
[ 0.423355] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.423370] pci 0000:00:1f.2: reg 0x10: [mem 0xf1244000-0xf1247fff]
[ 0.424443] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[ 0.424471] pci 0000:00:1f.3: reg 0x10: [mem 0xf1240000-0xf1243fff 64bit]
[ 0.424504] pci 0000:00:1f.3: reg 0x20: [mem 0xf1230000-0xf123ffff 64bit]
[ 0.424558] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.425624] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.425678] pci 0000:00:1f.4: reg 0x10: [mem 0xf124b000-0xf124b0ff 64bit]
[ 0.425729] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.426830] pci 0000:00:1f.6: [8086:15d8] type 00 class 0x020000
[ 0.426856] pci 0000:00:1f.6: reg 0x10: [mem 0xf1200000-0xf121ffff]
[ 0.426962] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.428047] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.428136] pci 0000:03:00.0: [8086:24fd] type 00 class 0x028000
[ 0.428186] pci 0000:03:00.0: reg 0x10: [mem 0xf1100000-0xf1101fff 64bit]
[ 0.428388] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.428599] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.428603] pci 0000:00:1c.3: bridge window [mem 0xf1100000-0xf11fffff]
[ 0.428933] pci 0000:04:00.0: [8086:f1a5] type 00 class 0x010802
[ 0.428966] pci 0000:04:00.0: reg 0x10: [mem 0xf1000000-0xf1003fff 64bit]
[ 0.429259] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.429263] pci 0000:00:1c.4: bridge window [mem 0xf1000000-0xf10fffff]
[ 0.431277] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.431277] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.431277] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.431277] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.431277] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.431277] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.431277] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.431277] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.431277] ACPI: EC: interrupt unblocked
[ 0.431277] ACPI: EC: event unblocked
[ 0.431277] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.431277] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
[ 0.431277] iommu: Default domain type: Translated
[ 0.431277] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.431277] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.431277] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.431277] vgaarb: loaded
[ 0.431277] ACPI: bus type USB registered
[ 0.431277] usbcore: registered new interface driver usbfs
[ 0.431277] usbcore: registered new interface driver hub
[ 0.433885] usbcore: registered new device driver usb
[ 0.433906] pps_core: LinuxPPS API ver. 1 registered
[ 0.433907] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.433908] PTP clock support registered
[ 0.433915] EDAC MC: Ver: 3.0.0
[ 0.434135] Registered efivars operations
[ 0.434135] PCI: Using ACPI for IRQ routing
[ 0.440738] PCI: pci_cache_line_size set to 64 bytes
[ 0.440935] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.440936] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff]
[ 0.440937] e820: reserve RAM buffer [mem 0xca135018-0xcbffffff]
[ 0.440938] e820: reserve RAM buffer [mem 0xce465000-0xcfffffff]
[ 0.440938] e820: reserve RAM buffer [mem 0xd9593000-0xdbffffff]
[ 0.440939] e820: reserve RAM buffer [mem 0xdb500000-0xdbffffff]
[ 0.440940] e820: reserve RAM buffer [mem 0x41f800000-0x41fffffff]
[ 0.441021] NetLabel: Initializing
[ 0.441021] NetLabel: domain hash size = 128
[ 0.441022] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.441034] NetLabel: unlabeled traffic allowed by default
[ 0.441042] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.441042] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.443925] clocksource: Switched to clocksource tsc-early
[ 0.454068] *** VALIDATE bpf ***
[ 0.454131] VFS: Disk quotas dquot_6.6.0
[ 0.454149] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.454173] *** VALIDATE ramfs ***
[ 0.454175] *** VALIDATE hugetlbfs ***
[ 0.454218] pnp: PnP ACPI init
[ 0.454404] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.454405] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.454406] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.454408] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.454409] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.454410] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.454411] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.454416] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454825] system 00:01: [io 0xff00-0xfffe] has been reserved
[ 0.454829] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.455037] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.455039] system 00:02: [io 0xffff] has been reserved
[ 0.455040] system 00:02: [io 0xffff] has been reserved
[ 0.455041] system 00:02: [io 0xffff] has been reserved
[ 0.455042] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.455043] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.455046] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.455159] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.455197] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.455200] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.455223] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.455244] pnp 00:06: Plug and Play ACPI device, IDs LEN2032 PNP0f03 (active)
[ 0.457435] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.458597] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.458598] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.458599] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.458600] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.458602] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.458603] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.458604] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.458605] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.458606] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.458608] system 00:08: [mem 0xf7fe0000-0xf7ffffff] has been reserved
[ 0.458611] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.461578] pnp: PnP ACPI: found 9 devices
[ 0.462657] thermal_sys: Registered thermal governor 'fair_share'
[ 0.462657] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.462658] thermal_sys: Registered thermal governor 'step_wise'
[ 0.462659] thermal_sys: Registered thermal governor 'user_space'
[ 0.462659] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.467198] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.467233] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.467247] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.467251] pci 0000:00:1c.3: bridge window [mem 0xf1100000-0xf11fffff]
[ 0.467257] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.467260] pci 0000:00:1c.4: bridge window [mem 0xf1000000-0xf10fffff]
[ 0.467267] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.467268] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.467269] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.467270] pci_bus 0000:00: resource 7 [mem 0xdf800000-0xf7ffffff window]
[ 0.467271] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.467272] pci_bus 0000:03: resource 1 [mem 0xf1100000-0xf11fffff]
[ 0.467273] pci_bus 0000:04: resource 1 [mem 0xf1000000-0xf10fffff]
[ 0.467454] NET: Registered protocol family 2
[ 0.467604] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.467682] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.467861] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.467935] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.467978] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.468037] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.468101] NET: Registered protocol family 1
[ 0.468105] NET: Registered protocol family 44
[ 0.468120] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.468564] PCI: CLS 0 bytes, default 64
[ 0.468632] Trying to unpack rootfs image as initramfs...
[ 0.843240] Freeing initrd memory: 24208K
[ 0.843280] DMAR: ACPI device "device:7e" under DMAR at fed91000 as 00:15.0
[ 0.874012] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.874019] software IO TLB: mapped [mem 0xd4aa7000-0xd8aa7000] (64MB)
[ 0.874176] check: Scanning for low memory corruption every 60 seconds
[ 0.874479] Initialise system trusted keyrings
[ 0.874501] Key type blacklist registered
[ 0.874540] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.875630] zbud: loaded
[ 0.879245] Key type asymmetric registered
[ 0.879246] Asymmetric key parser 'x509' registered
[ 0.879253] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.879300] io scheduler mq-deadline registered
[ 0.879301] io scheduler kyber registered
[ 0.879322] io scheduler bfq registered
[ 0.879711] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[ 0.879773] pcieport 0000:00:1c.0: AER: enabled with IRQ 122
[ 0.880010] pcieport 0000:00:1c.3: PME: Signaling with IRQ 123
[ 0.880057] pcieport 0000:00:1c.3: AER: enabled with IRQ 123
[ 0.880303] pcieport 0000:00:1c.4: PME: Signaling with IRQ 124
[ 0.880366] pcieport 0000:00:1c.4: AER: enabled with IRQ 124
[ 0.880436] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.880505] efifb: probing for efifb
[ 0.880519] efifb: No BGRT, not showing boot graphics
[ 0.880520] efifb: framebuffer at 0xe0000000, using 8100k, total 8100k
[ 0.880521] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.880521] efifb: scrolling: redraw
[ 0.880523] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.880553] fbcon: Deferring console take-over
[ 0.880554] fb0: EFI VGA frame buffer device
[ 0.880560] intel_idle: MWAIT substates: 0x11142120
[ 0.880561] intel_idle: v0.4.1 model 0x8E
[ 0.880771] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.880848] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.880882] ACPI: Lid Switch [LID]
[ 0.880920] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.880935] ACPI: Power Button [PWRB]
[ 0.880958] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.880971] ACPI: Sleep Button [SLPB]
[ 0.880996] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.881063] ACPI: Power Button [PWRF]
[ 0.882720] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.882721] ACPI: Thermal Zone [TZ00] (64 C)
[ 0.882997] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.883743] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.883744] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.884276] nvme nvme0: pci function 0000:04:00.0
[ 0.884571] usbcore: registered new interface driver usbserial_generic
[ 0.884575] usbserial: USB Serial support registered for generic
[ 0.884601] rtc_cmos 00:03: RTC can wake from S4
[ 0.885209] rtc_cmos 00:03: registered as rtc0
[ 0.885220] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.885265] intel_pstate: Intel P-state driver initializing
[ 0.885465] intel_pstate: HWP enabled
[ 0.885506] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.885611] intel_pmc_core intel_pmc_core.0: initialized
[ 0.885632] drop_monitor: Initializing network drop monitor service
[ 0.885785] NET: Registered protocol family 10
[ 0.891066] Segment Routing with IPv6
[ 0.891090] NET: Registered protocol family 17
[ 0.891298] RAS: Correctable Errors collector initialized.
[ 0.891340] microcode: sig=0x806e9, pf=0x80, revision=0xd6
[ 0.891391] microcode: Microcode Update Driver: v2.2.
[ 0.891406] IPI shorthand broadcast: enabled
[ 0.891414] sched_clock: Marking stable (900513527, -9131271)->(897783600, -6401344)
[ 0.891478] registered taskstats version 1
[ 0.891488] Loading compiled-in X.509 certificates
[ 0.894366] Loaded X.509 cert 'Build time autogenerated kernel key: 82eac3825100e98f672ca5016a34f99e87e85c9e'
[ 0.894393] zswap: loaded using pool lzo/zbud
[ 0.894564] Key type ._fscrypt registered
[ 0.894565] Key type .fscrypt registered
[ 0.899347] Key type big_key registered
[ 0.900603] PM: Magic number: 0:535:680
[ 0.900802] rtc_cmos 00:03: setting system clock to 2020-08-31T10:41:47 UTC (1598870507)
[ 1.130229] nvme nvme0: 4/0/0 default/read/poll queues
[ 1.135804] nvme0n1: p1 p2 p3 p4
[ 1.138663] Freeing unused decrypted memory: 2040K
[ 1.139168] Freeing unused kernel image memory: 1712K
[ 1.184385] Write protecting the kernel read-only data: 18432k
[ 1.185395] Freeing unused kernel image memory: 2012K
[ 1.185564] Freeing unused kernel image memory: 88K
[ 1.197628] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.197629] x86/mm: Checking user space page tables
[ 1.206763] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.206765] Run /init as init process
[ 1.286604] fbcon: Taking over console
[ 1.286664] Console: switching to colour frame buffer device 240x67
[ 1.355360] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.361917] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.361921] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.373261] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.373271] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.374116] cryptd: max_cpu_qlen set to 1000
[ 1.374365] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 1.374758] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.375052] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.375053] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.375055] usb usb1: Product: xHCI Host Controller
[ 1.375056] usb usb1: Manufacturer: Linux 5.4.61-1-lts xhci-hcd
[ 1.375057] usb usb1: SerialNumber: 0000:00:14.0
[ 1.375258] hub 1-0:1.0: USB hub found
[ 1.375276] hub 1-0:1.0: 12 ports detected
[ 1.377838] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 1.377839] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 1.377840] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 1.377841] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 1.377841] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 1.377842] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 1.379028] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.379036] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.379040] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.379191] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.379192] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.379194] usb usb2: Product: xHCI Host Controller
[ 1.379195] usb usb2: Manufacturer: Linux 5.4.61-1-lts xhci-hcd
[ 1.379196] usb usb2: SerialNumber: 0000:00:14.0
[ 1.379405] hub 2-0:1.0: USB hub found
[ 1.379425] hub 2-0:1.0: 6 ports detected
[ 1.380238] AVX2 version of gcm_enc/dec engaged.
[ 1.380238] AES CTR mode by8 optimization enabled
[ 1.380623] usb: port power management may be unreliable
[ 1.394812] mce: CPU3: Core temperature/speed normal
[ 1.394813] mce: CPU2: Package temperature/speed normal
[ 1.394814] mce: CPU1: Core temperature/speed normal
[ 1.394814] mce: CPU0: Package temperature/speed normal
[ 1.394815] mce: CPU1: Package temperature/speed normal
[ 1.394816] mce: CPU3: Package temperature/speed normal
[ 1.405637] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.421212] device-mapper: uevent: version 1.0.3
[ 1.421268] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 1.745142] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.791899] usb 2-3: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.25
[ 1.791905] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.791908] usb 2-3: Product: 4-Port USB 3.0 Hub
[ 1.791911] usb 2-3: Manufacturer: Generic
[ 1.800939] hub 2-3:1.0: USB hub found
[ 1.802667] hub 2-3:1.0: 3 ports detected
[ 1.834411] usb usb1-port1: over-current condition
[ 1.904400] tsc: Refined TSC clocksource calibration: 2711.979 MHz
[ 1.904416] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27177269164, max_idle_ns: 440795212223 ns
[ 1.904499] clocksource: Switched to clocksource tsc
[ 1.983941] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 2.176642] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.25
[ 2.176643] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.176644] usb 1-2: Product: 4-Port USB 2.0 Hub
[ 2.176645] usb 1-2: Manufacturer: Generic
[ 2.177726] hub 1-2:1.0: USB hub found
[ 2.178829] hub 1-2:1.0: 3 ports detected
[ 2.323942] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 2.564332] usb 1-3: New USB device found, idVendor=04f2, idProduct=b5bb, bcdDevice= 0.03
[ 2.564333] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.564334] usb 1-3: Product: Integrated Camera
[ 2.564335] usb 1-3: Manufacturer: Chicony Electronics Co.,Ltd.
[ 2.564336] usb 1-3: SerialNumber: 0001
[ 2.713934] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[ 2.895060] usb 1-4: New USB device found, idVendor=138a, idProduct=0011, bcdDevice= 0.78
[ 2.895061] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 2.895062] usb 1-4: SerialNumber: 69a1ca519b56
[ 3.043935] usb 1-7: new full-speed USB device number 5 using xhci_hcd
[ 3.224408] random: fast init done
[ 3.224890] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
[ 3.224891] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1223.147222] random: crng init done
[ 1223.546695] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 1223.546696] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 1223.546697] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 2)
[ 1223.546698] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 2)
[ 1223.546699] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 2)
[ 1223.546700] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 2)
[ 1223.547662] mce: CPU0: Core temperature/speed normal
[ 1223.547663] mce: CPU2: Core temperature/speed normal
[ 1223.547663] mce: CPU0: Package temperature/speed normal
[ 1223.547664] mce: CPU1: Package temperature/speed normal
[ 1223.547665] mce: CPU2: Package temperature/speed normal
[ 1223.547666] mce: CPU3: Package temperature/speed normal
[ 1253.768292] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 1253.887510] systemd[1]: systemd 245.7-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 1253.913996] systemd[1]: Detected architecture x86-64.
[ 1253.985354] systemd[1]: Set hostname to <dundee-13>.
[ 1254.119371] systemd[1]: /usr/lib/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[ 1254.128091] systemd[1]: /usr/lib/systemd/system/mysqld.service:36: PIDFile= references a path below legacy directory /var/run/, updating /var/run/mysqld/mysqld.pid → /run/mysqld/mysqld.pid; please update the unit file accordingly.
[ 1254.135693] systemd[1]: Created slice system-getty.slice.
[ 1254.135945] systemd[1]: Created slice system-modprobe.slice.
[ 1254.136155] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1254.136395] systemd[1]: Created slice User and Session Slice.
[ 1254.136444] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1254.136481] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1254.136681] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1254.136705] systemd[1]: Reached target Local Encrypted Volumes.
[ 1254.136717] systemd[1]: Reached target Login Prompts.
[ 1254.136735] systemd[1]: Reached target Paths.
[ 1254.136746] systemd[1]: Reached target Remote File Systems.
[ 1254.136755] systemd[1]: Reached target Slices.
[ 1254.136775] systemd[1]: Reached target Swap.
[ 1254.136832] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1254.137057] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1254.137230] systemd[1]: Listening on LVM2 poll daemon socket.
[ 1254.138547] systemd[1]: Listening on Process Core Dump Socket.
[ 1254.138592] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 1254.138707] systemd[1]: Listening on Journal Audit Socket.
[ 1254.138777] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1254.138860] systemd[1]: Listening on Journal Socket.
[ 1254.138924] systemd[1]: Listening on udev Control Socket.
[ 1254.138972] systemd[1]: Listening on udev Kernel Socket.
[ 1254.139734] systemd[1]: Mounting Huge Pages File System...
[ 1254.140842] systemd[1]: Mounting POSIX Message Queue File System...
[ 1254.142015] systemd[1]: Mounting Kernel Debug File System...
[ 1254.143163] systemd[1]: Mounting Kernel Trace File System...
[ 1254.144402] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 1254.145678] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 1254.146647] systemd[1]: Starting Load Kernel Module drm...
[ 1254.149279] systemd[1]: Starting Set Up Additional Binary Formats...
[ 1254.149339] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 1254.150919] systemd[1]: Starting Journal Service...
[ 1254.152587] systemd[1]: Starting Load Kernel Modules...
[ 1254.153596] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1254.154892] systemd[1]: Starting udev Coldplug all Devices...
[ 1254.156482] systemd[1]: Mounted Huge Pages File System.
[ 1254.156613] systemd[1]: Mounted POSIX Message Queue File System.
[ 1254.156718] systemd[1]: Mounted Kernel Debug File System.
[ 1254.156826] systemd[1]: Mounted Kernel Trace File System.
[ 1254.157480] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 1254.168131] Linux agpgart interface v0.103
[ 1254.171086] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 268 (systemd-binfmt)
[ 1254.172241] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 1254.177533] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 1254.177847] EXT4-fs (dm-1): re-mounted. Opts: discard,data=ordered
[ 1254.179984] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 1254.180119] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[ 1254.182287] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 1254.183302] systemd[1]: Starting Create System Users...
[ 1254.196693] SCSI subsystem initialized
[ 1254.197337] systemd[1]: Finished Set Up Additional Binary Formats.
[ 1254.206281] systemd[1]: Finished Load Kernel Modules.
[ 1254.206611] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 1254.207779] systemd[1]: Mounting Kernel Configuration File System...
[ 1254.208878] systemd[1]: Starting Apply Kernel Variables...
[ 1254.214230] systemd[1]: Mounted Kernel Configuration File System.
[ 1254.221420] systemd[1]: Finished Create System Users.
[ 1254.222663] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1254.225381] systemd[1]: Finished Apply Kernel Variables.
[ 1254.238106] systemd[1]: modprobe@drm.service: Succeeded.
[ 1254.238471] systemd[1]: Finished Load Kernel Module drm.
[ 1254.249490] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 1254.250778] systemd[1]: Starting udev Kernel Device Manager...
[ 1254.304821] systemd[1]: Finished udev Coldplug all Devices.
[ 1254.617755] systemd[1]: Started Journal Service.
[ 1254.617833] audit: type=1130 audit(1598871761.203:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1254.679244] audit: type=1130 audit(1598871761.263:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1254.679247] audit: type=1130 audit(1598871761.263:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1254.791222] ACPI: AC Adapter [ACAD] (on-line)
[ 1254.806184] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x0, rev-id 78)
[ 1254.940976] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1254.941066] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1254.959060] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 1254.959379] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 1254.976396] Non-volatile memory driver v1.3
[ 1255.056808] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[ 1255.056997] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 1255.057032] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 1255.146580] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 1255.146582] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 1255.146582] thinkpad_acpi: ThinkPad BIOS R0JET28W (1.13 ), EC R0JHT24W
[ 1255.146583] thinkpad_acpi: Lenovo ThinkPad 13 2nd Gen, model 20J1003EMC
[ 1255.158511] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 1255.163453] thinkpad_acpi: radio switch found; radios are enabled
[ 1255.163463] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 1255.163739] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 1255.163739] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 1255.172740] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 1255.186076] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 1255.186183] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 1255.190273] battery: new extension: ThinkPad Battery Extension
[ 1255.190310] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 1255.215518] audit: type=1130 audit(1598871761.803:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1255.229850] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 1255.242643] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 1255.243411] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1255.244057] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 1255.244059] cfg80211: failed to load regulatory.db
[ 1255.267230] audit: type=1130 audit(1598871761.853:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-b46289be\x2d4888\x2d49e5\x2da271\x2d4cdf73c23169 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1255.272423] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: discard,data=ordered
[ 1255.284184] systemd-journald[269]: Received client request to flush runtime journal.
[ 1255.288381] systemd-journald[269]: File /var/log/journal/7f93efc24bc84776b2c2407f9f1c3700/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 1255.290030] audit: type=1130 audit(1598871761.873:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-BADB\x2dECDC comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1255.292288] audit: type=1130 audit(1598871761.873:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1255.334260] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1255.334261] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1255.334520] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1255.362151] audit: type=1130 audit(1598871761.943:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1255.412454] Intel(R) Wireless WiFi driver for Linux
[ 1255.412455] Copyright(c) 2003- 2015 Intel Corporation
[ 1255.412544] iwlwifi 0000:03:00.0: enabling device (0000 -> 0002)
[ 1255.425818] iwlwifi 0000:03:00.0: Found debug destination: EXTERNAL_DRAM
[ 1255.425820] iwlwifi 0000:03:00.0: Found debug configuration: 0
[ 1255.426408] iwlwifi 0000:03:00.0: loaded firmware version 36.79ff3ccf.0 op_mode iwlmvm
[ 1255.557347] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 1255.557349] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 1255.557349] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 1255.557350] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 1255.557351] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 1255.557351] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 1255.593248] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 1255.641836] checking generic (e0000000 7e9000) vs hw (e0000000 10000000)
[ 1255.641837] fb0: switching to inteldrmfb from EFI VGA
[ 1255.679357] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) a8:1e:84:d1:23:93
[ 1255.679360] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 1255.679438] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 1255.681340] Console: switching to colour dummy device 80x25
[ 1255.681364] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1255.684354] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1255.684355] [drm] Driver supports precise vblank timestamp query.
[ 1255.684940] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1255.687593] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 1255.721846] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 1255.731677] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1255.731925] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 1255.822271] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x4d1f00)
[ 1255.825446] audit: type=1130 audit(1598871762.413:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-961c1e60\x2de258\x2d4532\x2da66c\x2deffb31d7c4b8 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1255.835105] psmouse serio1: elantech: Synaptics capabilities query result 0x80, 0x14, 0x0c.
[ 1255.836450] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: discard,data=ordered
[ 1255.849670] psmouse serio1: elantech: Elan sample query result 00, 40, 85
[ 1255.849776] fbcon: i915drmfb (fb0) is primary device
[ 1255.851240] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[ 1255.858711] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 1255.859198] iwlwifi 0000:03:00.0: Allocated 0x00400000 bytes for firmware monitor.
[ 1255.863380] Console: switching to colour frame buffer device 240x67
[ 1255.865187] audit: type=1130 audit(1598871762.453:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-pvscan@254:0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1255.869268] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 1255.874075] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 1255.913076] iwlwifi 0000:03:00.0: base HW address: 90:61:ae:35:42:88
[ 1255.916766] input: ETPS/2 Elantech TrackPoint as /devices/platform/i8042/serio1/input/input11
[ 1255.927677] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 1255.927679] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1255.927681] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 1255.927682] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 1255.927683] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 1255.927685] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 1255.927686] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 1255.932858] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
[ 1255.988006] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 1255.988391] thermal thermal_zone2: failed to read out thermal zone (-61)
[ 1256.166294] iTCO_vendor_support: vendor-support=0
[ 1256.168504] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1256.168595] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 1256.169174] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1256.172271] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 1256.172331] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 1256.172382] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 1256.172430] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 1256.172481] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 1256.172523] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 1256.172562] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 1256.172610] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 1256.320110] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 1256.355347] mousedev: PS/2 mouse device common for all mice
[ 1256.379491] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 1256.997539] intel_rapl_common: Found RAPL domain package
[ 1256.997540] intel_rapl_common: Found RAPL domain core
[ 1256.997541] intel_rapl_common: Found RAPL domain uncore
[ 1256.997542] intel_rapl_common: Found RAPL domain dram
[ 1257.623944] Bluetooth: Core ver 2.22
[ 1257.623960] NET: Registered protocol family 31
[ 1257.623961] Bluetooth: HCI device and connection manager initialized
[ 1257.623964] Bluetooth: HCI socket layer initialized
[ 1257.623966] Bluetooth: L2CAP socket layer initialized
[ 1257.623968] Bluetooth: SCO socket layer initialized
[ 1257.647772] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 1257.677115] mc: Linux media interface: v0.10
[ 1257.695050] videodev: Linux video capture interface: v2.00
[ 1257.778220] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 1257.784245] usbcore: registered new interface driver btusb
[ 1257.785683] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[ 1257.786686] Bluetooth: hci0: Device revision is 16
[ 1257.786687] Bluetooth: hci0: Secure boot is enabled
[ 1257.786688] Bluetooth: hci0: OTP lock is enabled
[ 1257.786688] Bluetooth: hci0: API lock is enabled
[ 1257.786689] Bluetooth: hci0: Debug lock is disabled
[ 1257.786690] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 1257.788815] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[ 1257.813358] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1257.813359] Bluetooth: BNEP filters: protocol multicast
[ 1257.813362] Bluetooth: BNEP socket layer initialized
[ 1257.847683] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring
[ 1257.875817] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 1257.886153] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b5bb)
[ 1257.900267] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized!
[ 1257.900269] uvcvideo 1-3:1.0: Entity type for entity Processing 2 was not initialized!
[ 1257.900270] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
[ 1257.900340] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input20
[ 1257.900402] usbcore: registered new interface driver uvcvideo
[ 1257.900403] USB Video Class driver (1.1.1)
[ 1258.006900] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 1258.071053] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring
[ 1258.285659] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1258.288495] Bridge firewalling registered
[ 1258.313153] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[ 1258.313160] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 1258.347654] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 1258.444856] Initializing XFRM netlink socket
[ 1258.795510] docker0: port 1(veth5d017d7) entered blocking state
[ 1258.795512] docker0: port 1(veth5d017d7) entered disabled state
[ 1258.795589] device veth5d017d7 entered promiscuous mode
[ 1258.795683] docker0: port 1(veth5d017d7) entered blocking state
[ 1258.795684] docker0: port 1(veth5d017d7) entered forwarding state
[ 1258.795700] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[ 1258.795761] docker0: port 1(veth5d017d7) entered disabled state
[ 1259.055679] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[ 1259.174439] Bluetooth: hci0: Waiting for firmware download to complete
[ 1259.174670] Bluetooth: hci0: Firmware loaded in 1357833 usecs
[ 1259.174693] Bluetooth: hci0: Waiting for device to boot
[ 1259.186672] Bluetooth: hci0: Device booted in 11706 usecs
[ 1259.186822] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[ 1259.189683] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 1259.234427] eth0: renamed from veth2467aea
[ 1259.253544] NET: Registered protocol family 38
[ 1259.274137] IPv6: ADDRCONF(NETDEV_CHANGE): veth5d017d7: link becomes ready
[ 1259.274155] docker0: port 1(veth5d017d7) entered blocking state
[ 1259.274156] docker0: port 1(veth5d017d7) entered forwarding state
[ 1259.723947] kauditd_printk_skb: 122 callbacks suppressed
[ 1259.723949] audit: type=1101 audit(1598871766.303:134): pid=1222 uid=1000 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_permit acct="developer" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/console res=success'
[ 1259.724146] audit: type=1123 audit(1598871766.313:135): pid=1222 uid=1000 auid=4294967295 ses=4294967295 msg='cwd="/" cmd=2F6574632F696E69742E642F737368207374617274 terminal=pts/0 res=success'
[ 1259.724148] audit: type=1110 audit(1598871766.313:136): pid=1222 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/console res=success'
[ 1259.724361] audit: type=1105 audit(1598871766.313:137): pid=1222 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_permit,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/console res=success'
[ 1259.729753] audit: type=1130 audit(1598871766.313:138): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=docker comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1259.791306] audit: type=1106 audit(1598871766.373:139): pid=1222 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_permit,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/console res=success'
[ 1259.791558] audit: type=1104 audit(1598871766.373:140): pid=1222 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/console res=success'
[ 1260.073895] ucsi_acpi USBC000:00: PPM NOT RESPONDING
[ 1260.114259] ucsi_acpi USBC000:00: PPM init failed (-110)
[ 1260.807551] audit: type=1130 audit(1598871767.393:141): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dhcpd4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1260.807573] audit: type=1131 audit(1598871767.393:142): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dhcpd4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1260.842776] audit: type=1130 audit(1598871767.423:143): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dhcpd4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 1262.016336] rfkill: input handler disabled
[ 1263.440774] wlp3s0: authenticate with 38:43:7d:1a:04:f9
[ 1263.445191] wlp3s0: send auth to 38:43:7d:1a:04:f9 (try 1/3)
[ 1263.470034] wlp3s0: authenticated
[ 1263.473900] wlp3s0: associate with 38:43:7d:1a:04:f9 (try 1/3)
[ 1263.515222] wlp3s0: RX AssocResp from 38:43:7d:1a:04:f9 (capab=0x1511 status=0 aid=1)
[ 1263.517172] wlp3s0: associated
[ 1263.555567] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 1265.072506] kauditd_printk_skb: 8 callbacks suppressed
[ 1265.072507] audit: type=1130 audit(1598871771.653:152): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dhcpd4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1265.072510] audit: type=1131 audit(1598871771.653:153): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dhcpd4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1265.098863] audit: type=1130 audit(1598871771.683:154): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dhcpd4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 1267.322141] audit: type=1130 audit(1598871773.903:155): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dhcpd4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1267.322144] audit: type=1131 audit(1598871773.903:156): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dhcpd4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1267.996315] audit: type=1131 audit(1598871774.583:157): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1269.381817] audit: type=1100 audit(1598871775.963:158): pid=1466 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=? acct="dundee" exe="/usr/lib/gdm-session-worker" hostname=dundee-13 addr=? terminal=/dev/tty1 res=failed'
[ 1271.065926] audit: type=1112 audit(1598871777.653:159): pid=1466 uid=0 auid=4294967295 ses=4294967295 msg='uid=1000 exe="/usr/lib/gdm-session-worker" hostname=? addr=? terminal=? res=failed'
[ 1282.425949] audit: type=1100 audit(1598871789.013:160): pid=1465 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_shells,pam_faillock,pam_permit,pam_faillock,pam_gnome_keyring acct="dundee" exe="/usr/lib/gdm-session-worker" hostname=dundee-13 addr=? terminal=/dev/tty1 res=success'
[ 1282.428207] audit: type=1101 audit(1598871789.013:161): pid=1465 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="dundee" exe="/usr/lib/gdm-session-worker" hostname=dundee-13 addr=? terminal=/dev/tty1 res=success'
[ 1282.429334] audit: type=1103 audit(1598871789.013:162): pid=1465 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_faillock,pam_gnome_keyring acct="dundee" exe="/usr/lib/gdm-session-worker" hostname=dundee-13 addr=? terminal=/dev/tty1 res=success'
[ 1282.434640] audit: type=1006 audit(1598871789.023:163): pid=1465 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[ 1282.461785] audit: type=1130 audit(1598871789.043:164): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1282.469201] audit: type=1101 audit(1598871789.053:165): pid=1480 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="dundee" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1282.469254] audit: type=1103 audit(1598871789.053:166): pid=1480 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="dundee" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 1282.469337] audit: type=1006 audit(1598871789.053:167): pid=1480 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=4 res=1
[ 1282.470309] audit: type=1105 audit(1598871789.053:168): pid=1480 uid=0 auid=1000 ses=4 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="dundee" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1282.541514] systemd-journald[269]: File /var/log/journal/7f93efc24bc84776b2c2407f9f1c3700/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 1282.551822] audit: type=1130 audit(1598871789.133:169): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1282.836944] rfkill: input handler enabled
[ 1284.168249] Bluetooth: RFCOMM TTY layer initialized
[ 1284.168254] Bluetooth: RFCOMM socket layer initialized
[ 1284.168259] Bluetooth: RFCOMM ver 1.11
[ 1285.524058] fuse: init (API version 7.31)
[ 1285.524087] *** VALIDATE fuse ***
[ 1285.524091] *** VALIDATE fuse ***
[ 1287.015561] rfkill: input handler disabled
[ 1289.434899] kauditd_printk_skb: 4 callbacks suppressed
[ 1289.434900] audit: type=1130 audit(1598871796.055:174): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=blueman-mechanism comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1289.593173] audit: type=1106 audit(1598871796.217:175): pid=869 uid=0 auid=120 ses=1 msg='op=PAM:session_close grantors=pam_loginuid,pam_keyinit,pam_succeed_if,pam_permit,pam_systemd,pam_env acct="gdm" exe="/usr/lib/gdm-session-worker" hostname=dundee-13 addr=? terminal=/dev/tty1 res=success'
[ 1289.593177] audit: type=1104 audit(1598871796.217:176): pid=869 uid=0 auid=120 ses=1 msg='op=PAM:setcred grantors=pam_permit acct="gdm" exe="/usr/lib/gdm-session-worker" hostname=dundee-13 addr=? terminal=/dev/tty1 res=success'
[ 1299.723238] audit: type=1131 audit(1598871806.422:177): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1299.733791] audit: type=1131 audit(1598871806.432:178): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1299.884938] audit: type=1131 audit(1598871806.582:179): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=fprintd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1318.407160] audit: type=1131 audit(1598871825.125:180): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1319.095367] audit: type=1131 audit(1598871825.816:181): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-localed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1319.335827] audit: type=1131 audit(1598871826.055:182): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=blueman-mechanism comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1321.871713] audit: type=1131 audit(1598871828.589:183): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=geoclue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1374.247211] audit: type=1111 audit(1598871880.916:184): pid=519 uid=0 auid=4294967295 ses=4294967295 msg='op=connection-activate uuid=8e868517-97fc-40c6-87b6-398323cb4521 name=53657A6E616D2056504E pid=1537 uid=1000 result=success exe="/usr/bin/NetworkManager" hostname=? addr=? terminal=? res=success'
[ 1374.274973] tun: Universal TUN/TAP device driver, 1.6
[ 1376.145819] audit: type=1130 audit(1598871882.815:185): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1385.912786] audit: type=1131 audit(1598871892.592:186): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1526.326064] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 5832)
[ 1526.326064] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 5832)
[ 1526.326066] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 8443)
[ 1526.326067] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 8443)
[ 1526.326068] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 8443)
[ 1526.326069] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 8443)Looks like some problem with USB? I have no USB device attached...
Last edited by dundee (2020-08-31 22:08:37)
Offline
#2 2020-08-31 12:45:32
- 2ManyDogs
- Forum Fellow
- Registered: 2012-01-15
- Posts: 4,645
Re: (SOLVED) Two kworkers at 100% cpu usage
Please edit your post and use [ code ] tags (not quote tags) when posting output.
https://wiki.archlinux.org/index.php/Co … s_and_code
https://bbs.archlinux.org/help.php#bbcode
Offline
#3 2020-08-31 12:56:26
- dundee
- Member
- Registered: 2010-09-05
- Posts: 16
Re: (SOLVED) Two kworkers at 100% cpu usage
2ManyDogs wrote:
Please edit your post and use [ code ] tags (not quote tags) when posting output.
https://wiki.archlinux.org/index.php/Co … s_and_code
https://bbs.archlinux.org/help.php#bbcode
Updated, thanks!
Offline
#4 2020-08-31 13:00:47
- dundee
- Member
- Registered: 2010-09-05
- Posts: 16
Re: (SOLVED) Two kworkers at 100% cpu usage
I can see two warnings in dmesg:
usb usb1-port1: over-current condition
ucsi_acpi USBC000:00: PPM init failed (-110)but I have no idea if they are important and related to this.
Offline
#5 2020-08-31 17:51:46
- dundee
- Member
- Registered: 2010-09-05
- Posts: 16
Re: (SOLVED) Two kworkers at 100% cpu usage
It really looks like problem with some USB device:
[25354.615311] PM: suspend entry (deep)
[25354.627373] Filesystems sync: 0.012 seconds
[25354.635354] Freezing user space processes ... (elapsed 0.001 seconds) done.
[25354.637279] OOM killer disabled.
[25354.637279] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[25354.638762] printk: Suspending console(s) (use no_console_suspend to debug)
[25354.754426] e1000e: EEE TX LPI TIMER: 00000011
[25354.766236] PM: dpm_run_callback(): usb_dev_suspend+0x0/0x10 returns -16
[25354.766241] PM: Device usb2 failed to suspend async: error -16
[25354.926708] PM: Some devices failed to suspend, or early wake event detected
[25354.939246] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[25355.075836] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[25355.140321] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring
[25355.168935] acpi LNXPOWER:00: Turning OFF
[25355.169047] OOM killer enabled.
[25355.169049] Restarting tasks ... done.
[25355.173730] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[25355.179518] nvme nvme0: 4/0/0 default/read/poll queues
[25355.187877] PM: suspend exitusb2 might be Realtek RTS5411 chip... but no idea what to do 
Offline
#6 2020-08-31 22:07:50
- dundee
- Member
- Registered: 2010-09-05
- Posts: 16
Re: (SOLVED) Two kworkers at 100% cpu usage
It was a hardware/firmware problem. Toggling USB settings in BIOS resolved the issue.
Offline