You are not logged in.

Pages: 1

#1 2020-09-23 04:19:31

Javigo07
Member
Registered: 2020-09-23
Posts: 6

[SOLVED] Radeon RX580 and black screen after an usual update

A week ago I updated my system and now, when my system is booting, I just get a black screen (the screen turns off). I've already used nomodeset and amdgpu.dc=0 to see some logs. Apparently Xorg is failing because of I get a "segmentation fault error 0x10", I've searched but haven't got a solution. If it matters, I have my monitor connected to the HDMI port on the GPU.

Last edited by Javigo07 (2020-09-29 05:02:48)

Offline

#2 2020-09-23 04:44:45

solskog
Member
Registered: 2020-09-05
Posts: 416

Re: [SOLVED] Radeon RX580 and black screen after an usual update

Pls output your .local/share/xorg/Xorg.0.log and lspci -nnk.

Paste your output inside a code block, Pls.

Offline

#3 2020-09-23 06:07:12

Javigo07
Member
Registered: 2020-09-23
Posts: 6

Re: [SOLVED] Radeon RX580 and black screen after an usual update

Here it is, my entire Xorg log. It's not the Xorg.0 but it's the Xorg.1 because the 0 has the log of amdgpu.dc=0.

[    65.014] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[    65.014] 
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[    65.014] Build Operating System: Linux Arch Linux
[    65.014] Current Operating System: Linux javigo07 5.8.10-zen1-1-zen #1 ZEN SMP PREEMPT Thu, 17 Sep 2020 18:01:58 +0000 x86_64
[    65.014] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-zen root=UUID=0539bfc6-c8c3-4af9-8b35-2fad26b88a62 rw quiet splash amdgpu.ppfeaturemask=0xffffffff
[    65.014] Build Date: 02 September 2020  06:17:44AM
[    65.014]  
[    65.014] Current version of pixman: 0.40.0
[    65.014] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    65.014] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    65.014] (==) Log file: "/home/javigo07/.local/share/xorg/Xorg.1.log", Time: Sat Sep 19 18:43:57 2020
[    65.015] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    65.015] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    65.016] (==) No Layout section.  Using the first Screen section.
[    65.016] (==) No screen section available. Using defaults.
[    65.016] (**) |-->Screen "Default Screen Section" (0)
[    65.016] (**) |   |-->Monitor "<default monitor>"
[    65.016] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    65.016] (**) |   |-->Device "AMD"
[    65.016] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    65.016] (==) Automatically adding devices
[    65.016] (==) Automatically enabling devices
[    65.016] (==) Automatically adding GPU devices
[    65.016] (==) Automatically binding GPU devices
[    65.016] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    65.021] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    65.021] 	Entry deleted from font path.
[    65.022] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    65.022] (==) ModulePath set to "/usr/lib/xorg/modules"
[    65.022] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    65.022] (II) Module ABI versions:
[    65.022] 	X.Org ANSI C Emulation: 0.4
[    65.022] 	X.Org Video Driver: 24.1
[    65.022] 	X.Org XInput driver : 24.1
[    65.022] 	X.Org Server Extension : 10.0
[    65.022] (++) using VT number 2

[    65.022] (--) controlling tty is VT number 2, auto-enabling KeepTty
[    65.023] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[    65.023] (II) xfree86: Adding drm device (/dev/dri/card0)
[    65.023] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:07:00.0/drm/card0
[    65.023] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[    65.025] (--) PCI:*(7@0:0:0) 1002:67df:1002:0b31 rev 231, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfce00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[    65.025] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    65.025] (II) LoadModule: "glx"
[    65.026] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    65.027] (II) Module glx: vendor="X.Org Foundation"
[    65.027] 	compiled for 1.20.9, module version = 1.0.0
[    65.027] 	ABI class: X.Org Server Extension, version 10.0
[    65.027] (II) LoadModule: "amdgpu"
[    65.027] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[    65.028] (II) Module amdgpu: vendor="X.Org Foundation"
[    65.028] 	compiled for 1.20.8, module version = 19.1.0
[    65.028] 	Module class: X.Org Video Driver
[    65.028] 	ABI class: X.Org Video Driver, version 24.1
[    65.028] (II) AMDGPU: Driver for AMD Radeon:
	All GPUs supported by the amdgpu kernel driver
[    65.028] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    65.028] (II) AMDGPU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    65.028] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[    65.028] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    65.028] (==) AMDGPU(0): Default visual is TrueColor
[    65.028] (==) AMDGPU(0): RGB weight 888
[    65.028] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[    65.028] (--) AMDGPU(0): Chipset: "Radeon RX 580 Series" (ChipID = 0x67df)
[    65.028] (II) Loading sub module "fb"
[    65.028] (II) LoadModule: "fb"
[    65.028] (II) Loading /usr/lib/xorg/modules/libfb.so
[    65.029] (II) Module fb: vendor="X.Org Foundation"
[    65.029] 	compiled for 1.20.9, module version = 1.0.0
[    65.029] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    65.029] (II) Loading sub module "dri2"
[    65.029] (II) LoadModule: "dri2"
[    65.029] (II) Module "dri2" already built-in
[    65.066] (II) Loading sub module "glamoregl"
[    65.066] (II) LoadModule: "glamoregl"
[    65.066] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    65.071] (II) Module glamoregl: vendor="X.Org Foundation"
[    65.071] 	compiled for 1.20.9, module version = 1.0.1
[    65.071] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    65.153] (II) AMDGPU(0): glamor X acceleration enabled on Radeon RX 580 Series
[    65.153] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[    65.153] (==) AMDGPU(0): TearFree property default: auto
[    65.153] (==) AMDGPU(0): VariableRefresh: disabled
[    65.153] (II) AMDGPU(0): KMS Pageflipping: enabled
[    65.153] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[    65.153] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[    65.153] (II) AMDGPU(0): Output DisplayPort-2 has no monitor section
[    65.153] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[    65.153] (II) AMDGPU(0): Output DVI-D-0 has no monitor section
[    65.154] (II) AMDGPU(0): EDID for output DisplayPort-0
[    65.154] (II) AMDGPU(0): EDID for output DisplayPort-1
[    65.154] (II) AMDGPU(0): EDID for output DisplayPort-2
[    65.154] (II) AMDGPU(0): EDID for output HDMI-A-0
[    65.154] (II) AMDGPU(0): Manufacturer: SAM  Model: 4de  Serial#: 1129132595
[    65.154] (II) AMDGPU(0): Year: 2009  Week: 17
[    65.154] (II) AMDGPU(0): EDID Version: 1.3
[    65.154] (II) AMDGPU(0): Digital Display Input
[    65.154] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 51  vert.: 29
[    65.154] (II) AMDGPU(0): Gamma: 2.20
[    65.154] (II) AMDGPU(0): DPMS capabilities: Off
[    65.154] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    65.154] (II) AMDGPU(0): First detailed timing is preferred mode
[    65.154] (II) AMDGPU(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    65.154] (II) AMDGPU(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[    65.154] (II) AMDGPU(0): Supported established timings:
[    65.154] (II) AMDGPU(0): 640x480@60Hz
[    65.154] (II) AMDGPU(0): 800x600@56Hz
[    65.154] (II) AMDGPU(0): 800x600@60Hz
[    65.154] (II) AMDGPU(0): 1024x768@60Hz
[    65.154] (II) AMDGPU(0): Manufacturer's mask: 0
[    65.154] (II) AMDGPU(0): Supported standard timings:
[    65.154] (II) AMDGPU(0): #0: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    65.154] (II) AMDGPU(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    65.154] (II) AMDGPU(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    65.154] (II) AMDGPU(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    65.154] (II) AMDGPU(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    65.154] (II) AMDGPU(0): #5: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    65.154] (II) AMDGPU(0): Supported detailed timing:
[    65.154] (II) AMDGPU(0): clock: 138.5 MHz   Image Size:  477 x 268 mm
[    65.154] (II) AMDGPU(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    65.154] (II) AMDGPU(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[    65.154] (II) AMDGPU(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 75 kHz, PixClock max 175 MHz
[    65.154] (II) AMDGPU(0): Monitor name: SyncMaster
[    65.154] (II) AMDGPU(0): Serial No: H9NS411770
[    65.154] (II) AMDGPU(0): EDID (in hex):
[    65.154] (II) AMDGPU(0): 	00ffffffffffff004c2dde0433324d43
[    65.154] (II) AMDGPU(0): 	1113010380331d782aee91a3544c9926
[    65.154] (II) AMDGPU(0): 	0f50542308008100814081809500b300
[    65.154] (II) AMDGPU(0): 	a940010101011a3680a070381f403020
[    65.154] (II) AMDGPU(0): 	3500dd0c1100001a000000fd00383d1e
[    65.154] (II) AMDGPU(0): 	4b11000a202020202020000000fc0053
[    65.154] (II) AMDGPU(0): 	796e634d61737465720a2020000000ff
[    65.154] (II) AMDGPU(0): 	0048394e533431313737300a20200091
[    65.154] (II) AMDGPU(0): Printing probed modes for output HDMI-A-0
[    65.154] (II) AMDGPU(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[    65.154] (II) AMDGPU(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "1280x720"x59.9  138.50  1280 1968 2000 2080  720 1083 1088 1111 +hsync -vsync (66.6 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    65.154] (II) AMDGPU(0): EDID for output DVI-D-0
[    65.154] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[    65.154] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[    65.154] (II) AMDGPU(0): Output DisplayPort-2 disconnected
[    65.154] (II) AMDGPU(0): Output HDMI-A-0 connected
[    65.154] (II) AMDGPU(0): Output DVI-D-0 disconnected
[    65.154] (II) AMDGPU(0): Using exact sizes for initial modes
[    65.154] (II) AMDGPU(0): Output HDMI-A-0 using initial mode 1920x1080 +0+0
[    65.154] (II) AMDGPU(0): mem size init: gart size :1ff86f000 vram size: s:1feee7000 visible:f2e7000
[    65.154] (==) AMDGPU(0): DPI set to (96, 96)
[    65.154] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[    65.154] (II) Loading sub module "ramdac"
[    65.154] (II) LoadModule: "ramdac"
[    65.154] (II) Module "ramdac" already built-in
[    65.154] (II) AMDGPU(0): [DRI2] Setup complete
[    65.154] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[    65.154] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[    65.154] (II) AMDGPU(0): Front buffer pitch: 8192 bytes
[    65.156] (II) AMDGPU(0): SYNC extension fences enabled
[    65.156] (II) AMDGPU(0): Present extension enabled
[    65.156] (==) AMDGPU(0): DRI3 enabled
[    65.156] (==) AMDGPU(0): Backing store enabled
[    65.156] (II) AMDGPU(0): Direct rendering enabled
[    65.164] (II) AMDGPU(0): Use GLAMOR acceleration.
[    65.164] (II) AMDGPU(0): Acceleration enabled
[    65.164] (==) AMDGPU(0): DPMS enabled
[    65.164] (==) AMDGPU(0): Silken mouse disabled
[    65.164] (II) AMDGPU(0): Set up textured video (glamor)
[    65.171] (II) Initializing extension Generic Event Extension
[    65.171] (II) Initializing extension SHAPE
[    65.171] (II) Initializing extension MIT-SHM
[    65.171] (II) Initializing extension XInputExtension
[    65.171] (II) Initializing extension XTEST
[    65.171] (II) Initializing extension BIG-REQUESTS
[    65.171] (II) Initializing extension SYNC
[    65.171] (II) Initializing extension XKEYBOARD
[    65.171] (II) Initializing extension XC-MISC
[    65.171] (II) Initializing extension SECURITY
[    65.171] (II) Initializing extension XFIXES
[    65.171] (II) Initializing extension RENDER
[    65.171] (II) Initializing extension RANDR
[    65.171] (II) Initializing extension COMPOSITE
[    65.171] (II) Initializing extension DAMAGE
[    65.171] (II) Initializing extension MIT-SCREEN-SAVER
[    65.171] (II) Initializing extension DOUBLE-BUFFER
[    65.171] (II) Initializing extension RECORD
[    65.171] (II) Initializing extension DPMS
[    65.171] (II) Initializing extension Present
[    65.171] (II) Initializing extension DRI3
[    65.171] (II) Initializing extension X-Resource
[    65.171] (II) Initializing extension XVideo
[    65.171] (II) Initializing extension XVideo-MotionCompensation
[    65.171] (II) Initializing extension GLX
[    65.174] (II) AIGLX: Loaded and initialized radeonsi
[    65.174] (II) GLX: Initialized DRI2 GL provider for screen 0
[    65.174] (II) Initializing extension XFree86-VidModeExtension
[    65.174] (II) Initializing extension XFree86-DGA
[    65.174] (II) Initializing extension XFree86-DRI
[    65.174] (II) Initializing extension DRI2
[    65.174] (EE) 
[    65.174] (EE) Backtrace:
[    65.175] (EE) 0: /usr/lib/Xorg (xorg_backtrace+0x53) [0x5567ee32ebd3]
[    65.175] (EE) 1: /usr/lib/Xorg (0x5567ee1e8000+0x151a15) [0x5567ee339a15]
[    65.175] (EE) 2: /usr/lib/libc.so.6 (0x7f0b95c1a000+0x3d6a0) [0x7f0b95c576a0]
[    65.175] (EE) 3: /usr/lib/libdrm_amdgpu.so.1 (amdgpu_bo_export+0xb6) [0x7f0b96145e86]
[    65.175] (EE) 4: /usr/lib/x86_64-linux-gnu/dri/amdgpu_dri.so (0x7f0b30a0a000+0x17c8c7a) [0x7f0b321d2c7a]
[    65.175] (EE) 5: /usr/lib/x86_64-linux-gnu/dri/amdgpu_dri.so (0x7f0b30a0a000+0x1636393) [0x7f0b32040393]
[    65.175] (EE) 6: /usr/lib/x86_64-linux-gnu/dri/amdgpu_dri.so (0x7f0b30a0a000+0x164bc0d) [0x7f0b32055c0d]
[    65.175] (EE) 7: /usr/lib/x86_64-linux-gnu/dri/amdgpu_dri.so (0x7f0b30a0a000+0x1369d0f) [0x7f0b31d73d0f]
[    65.175] (EE) 8: /usr/lib/x86_64-linux-gnu/dri/amdgpu_dri.so (eglCreateImageKHR+0x483) [0x7f0b31e3e473]
[    65.175] (EE) 9: /usr/lib/xorg/modules/libglamoregl.so (glamor_egl_create_textured_pixmap_from_gbm_bo+0xb6) [0x7f0b94eb0ae6]
[    65.175] (EE) 10: /usr/lib/xorg/modules/drivers/amdgpu_drv.so (0x7f0b9614e000+0xe6b0) [0x7f0b9615c6b0]
[    65.175] (EE) 11: /usr/lib/Xorg (0x5567ee1e8000+0x1937fb) [0x5567ee37b7fb]
[    65.175] (EE) 12: /usr/lib/Xorg (0x5567ee1e8000+0x39511) [0x5567ee221511]
[    65.175] (EE) 13: /usr/lib/libc.so.6 (__libc_start_main+0xf2) [0x7f0b95c42152]
[    65.175] (EE) 14: /usr/lib/Xorg (_start+0x2e) [0x5567ee2225ae]
[    65.175] (EE) 
[    65.175] (EE) Segmentation fault at address 0x10
[    65.175] (EE) 
Fatal server error:
[    65.175] (EE) Caught signal 11 (Segmentation fault). Server aborting
[    65.175] (EE) 
[    65.175] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    65.175] (EE) Please also check the log file at "/home/javigo07/.local/share/xorg/Xorg.1.log" for additional information.
[    65.175] (EE) 
[    65.175] (II) AIGLX: Suspending AIGLX clients for VT switch
[    65.191] (EE) Server terminated with error (1). Closing log file.

Also here is the lspci -nnk output code

00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Root Complex [1022:1480]
	Subsystem: Advanced Micro Devices, Inc. [AMD] Device [1022:1450]
00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse IOMMU [1022:1481]
	Subsystem: Advanced Micro Devices, Inc. [AMD] Starship/Matisse IOMMU [1022:1481]
00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
00:01.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge [1022:1483]
	Kernel driver in use: pcieport
00:01.3 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge [1022:1483]
	Kernel driver in use: pcieport
00:02.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
00:03.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
00:03.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge [1022:1483]
	Kernel driver in use: pcieport
00:04.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
00:05.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
00:07.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
00:07.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B] [1022:1484]
	Kernel driver in use: pcieport
00:08.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
00:08.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B] [1022:1484]
	Kernel driver in use: pcieport
00:08.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B] [1022:1484]
	Kernel driver in use: pcieport
00:08.3 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B] [1022:1484]
	Kernel driver in use: pcieport
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 61)
	Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001]
	Kernel modules: i2c_piix4, sp5100_tco
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 51)
	Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001]
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 0 [1022:1440]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 1 [1022:1441]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 2 [1022:1442]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 3 [1022:1443]
	Kernel driver in use: zenpower
	Kernel modules: k10temp, zenpower
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 4 [1022:1444]
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 5 [1022:1445]
00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 6 [1022:1446]
00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 7 [1022:1447]
01:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5763] (rev 01)
	Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:5763]
	Kernel driver in use: nvme
02:00.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset USB 3.1 XHCI Controller [1022:43d5] (rev 01)
	Subsystem: ASMedia Technology Inc. Device [1b21:1142]
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
02:00.1 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset SATA Controller [1022:43c8] (rev 01)
	Subsystem: ASMedia Technology Inc. Device [1b21:1062]
	Kernel driver in use: ahci
02:00.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Bridge [1022:43c6] (rev 01)
	Kernel driver in use: pcieport
03:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port [1022:43c7] (rev 01)
	Kernel driver in use: pcieport
03:01.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port [1022:43c7] (rev 01)
	Kernel driver in use: pcieport
03:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port [1022:43c7] (rev 01)
	Kernel driver in use: pcieport
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 16)
	DeviceName: Broadcom 5762
	Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet [1458:e000]
	Kernel driver in use: r8169
	Kernel modules: r8169
07:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] [1002:67df] (rev e7)
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:0b31]
	Kernel driver in use: amdgpu
	Kernel modules: amdgpu
07:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] [1002:aaf0]
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] [1002:aaf0]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
08:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Function [1022:148a]
	Subsystem: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Function [1022:148a]
09:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Reserved SPP [1022:1485]
	Subsystem: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Reserved SPP [1022:1485]
09:00.1 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Cryptographic Coprocessor PSPCPP [1022:1486]
	Subsystem: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Cryptographic Coprocessor PSPCPP [1022:1486]
	Kernel driver in use: ccp
	Kernel modules: ccp
09:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller [1022:149c]
	Subsystem: Gigabyte Technology Co., Ltd Device [1458:5007]
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
09:00.4 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse HD Audio Controller [1022:1487]
	Subsystem: Gigabyte Technology Co., Ltd Device [1458:a182]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
0a:00.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901] (rev 51)
	Subsystem: Gigabyte Technology Co., Ltd Device [1458:b002]
	Kernel driver in use: ahci
0b:00.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901] (rev 51)
	Subsystem: Gigabyte Technology Co., Ltd Device [1458:b002]
	Kernel driver in use: ahci

Hopefully you can help me. Thanks in advance.

Another thing I forgot to say before: When I try to use any LiveUSB (even of other distros) when driver is loaded, I lost image, so I'm unable to reinstall any OS (in case that was the problem).

Offline

#4 2020-09-23 11:40:06

solskog
Member
Registered: 2020-09-05
Posts: 416

Re: [SOLVED] Radeon RX580 and black screen after an usual update

When I compared your log with my log that also using a AMD RX GPU, I found your xorg debug Backtrace started right after DRI2 and missing Setting screen physical size:

[    65.174] (II) Initializing extension DRI2
----------------------------------------------
MISSING LINE: AMDGPU(0): Setting screen physical size to AAA x BBB
----------------------------------------------
[    65.174] (EE) Backtrace:
...
Fatal server error:
[    65.175] (EE) Caught signal 11 (Segmentation fault). Server aborting

Another thing I noticed is since you are using AMD RX 580 that should support 4K resolution but never showed on your log:
These modeline setting are for DVI-D-0 not for HDMI-A-0. 

[    65.154] (II) AMDGPU(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[    65.154] (II) AMDGPU(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "1280x720"x59.9  138.50  1280 1968 2000 2080  720 1083 1088 1111 +hsync -vsync (66.6 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    65.154] (II) AMDGPU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    65.154] (II) AMDGPU(0): EDID for output DVI-D-0

I don't know what it could be the problem but thses two tings can be related.

Last edited by solskog (2020-09-23 11:46:05)

Offline

#5 2020-09-23 20:47:52

Javigo07
Member
Registered: 2020-09-23
Posts: 6

Re: [SOLVED] Radeon RX580 and black screen after an usual update

I've searched about this, and I tried to add modelines with 

xrandr -addmode

but I was unable since it isn't detecting the display. I tried with some .conf files (10-screen.conf and 10-monitor.conf) too but without success. I've noticed that, when the screen goes off, the graphics card literally just turns off. I would think this is a harware issue if the gpu doesn't work on Windows. So... it must be something about the driver. Tried to reinstall my system but even in the LiveUSB I get the black screen.

Offline

#6 2020-09-23 20:54:41

loqs
Member
Registered: 2014-03-06
Posts: 17,372

Re: [SOLVED] Radeon RX580 and black screen after an usual update

What was in the update? (/var/log/pacman.log)

Offline

#7 2020-09-24 02:43:42

solskog
Member
Registered: 2020-09-05
Posts: 416

Re: [SOLVED] Radeon RX580 and black screen after an usual update

[    65.154] (II) AMDGPU(0): Printing probed modes for output HDMI-A-0

I was wrong about modeline for 4K resolution. When I tried with a smaller display myself, the 4K modeline didn't show up in Xorg.log, Your HDMI-A-0 modeline output is correct.

When you bootup a LiveUSB with Xorg, did you get the same error?

[    65.174] (II) Initializing extension DRI2
----------------------------------------------
MISSING LINE: AMDGPU(0): Setting screen physical size to AAA x BBB
----------------------------------------------
[    65.174] (EE) Backtrace:
...
Fatal server error:
...

Offline

#8 2020-09-24 08:45:00

Gosi
Member
From: Vienna, Austria
Registered: 2010-02-25
Posts: 100

Re: [SOLVED] Radeon RX580 and black screen after an usual update

[    65.014] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-zen root=UUID=0539bfc6-c8c3-4af9-8b35-2fad26b88a62 rw quiet splash amdgpu.ppfeaturemask=0xffffffff

How do you load the microcode?

Offline

#9 2020-09-25 02:05:35

Javigo07
Member
Registered: 2020-09-23
Posts: 6

Re: [SOLVED] Radeon RX580 and black screen after an usual update

About the pacman log, here it is, on the day I updated my system (15-sept):

[2020-09-14T18:10:36-0500] [PACMAN] synchronizing package lists
[2020-09-15T23:30:09-0500] [PACMAN] Running 'pacman -Syu'
[2020-09-15T23:30:09-0500] [PACMAN] synchronizing package lists
[2020-09-15T23:30:13-0500] [PACMAN] starting full system upgrade
[2020-09-15T23:31:57-0500] [ALPM] running '60-mkinitcpio-remove.hook'...
[2020-09-15T23:31:57-0500] [ALPM] running '71-dkms-remove.hook'...
[2020-09-15T23:31:57-0500] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod -m v4l2loopback -v 0.12.5 -k 5.8.8-zen1-1-zen
[2020-09-15T23:31:57-0500] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod -m openrazer-driver -v 2.8.0 -k 5.8.8-zen1-1-zen
[2020-09-15T23:31:58-0500] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod -m zenpower -v 0.1.12 -k 5.8.8-zen1-1-zen
[2020-09-15T23:31:58-0500] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod -m v4l2loopback-dc -v 1.4 -k 5.8.8-zen1-1-zen
[2020-09-15T23:31:58-0500] [ALPM-SCRIPTLET] ==> depmod 5.8.8-zen1-1-zen
[2020-09-15T23:32:03-0500] [ALPM-SCRIPTLET] ==> Unable to remove module zenpower/0.1.12 for kernel 5.8.8-arch1-1: Not found in dkms status output.
[2020-09-15T23:32:03-0500] [ALPM-SCRIPTLET] ==> Unable to remove module v4l2loopback/0.12.5 for kernel 5.8.8-arch1-1: Not found in dkms status output.
[2020-09-15T23:32:03-0500] [ALPM-SCRIPTLET] ==> Unable to remove module v4l2loopback-dc/1.4 for kernel 5.8.8-arch1-1: Not found in dkms status output.
[2020-09-15T23:32:03-0500] [ALPM-SCRIPTLET] ==> Unable to remove module openrazer-driver/2.8.0 for kernel 5.8.8-arch1-1: Not found in dkms status output.
[2020-09-15T23:32:03-0500] [ALPM] transaction started
[2020-09-15T23:32:03-0500] [ALPM] upgraded brotli (1.0.7-3 -> 1.0.9-1)
[2020-09-15T23:32:03-0500] [ALPM] upgraded htop (3.0.1-2 -> 3.0.2-1)
[2020-09-15T23:32:03-0500] [ALPM] upgraded libgudev (233-2 -> 234-1)
[2020-09-15T23:32:04-0500] [ALPM] upgraded linux (5.8.8.arch1-1 -> 5.8.9.arch2-1)
[2020-09-15T23:32:05-0500] [ALPM] upgraded linux-zen (5.8.8.zen1-1 -> 5.8.9.zen2-1)
[2020-09-15T23:32:06-0500] [ALPM] upgraded linux-zen-headers (5.8.8.zen1-1 -> 5.8.9.zen2-1)
[2020-09-15T23:32:06-0500] [ALPM] upgraded metis (5.1.0.p9-1 -> 5.1.0.p10-1)
[2020-09-15T23:32:06-0500] [ALPM] transaction completed
[2020-09-15T23:32:07-0500] [ALPM] running '30-systemd-update.hook'...
[2020-09-15T23:32:07-0500] [ALPM] running '60-depmod.hook'...
[2020-09-15T23:32:16-0500] [ALPM] running '70-dkms-install.hook'...
[2020-09-15T23:32:16-0500] [ALPM-SCRIPTLET] ==> dkms install --no-depmod -m v4l2loopback -v 0.12.5 -k 5.8.9-zen2-1-zen
[2020-09-15T23:32:18-0500] [ALPM-SCRIPTLET] ==> dkms install --no-depmod -m openrazer-driver -v 2.8.0 -k 5.8.9-zen2-1-zen
[2020-09-15T23:32:24-0500] [ALPM-SCRIPTLET] ==> dkms install --no-depmod -m zenpower -v 0.1.12 -k 5.8.9-zen2-1-zen
[2020-09-15T23:32:25-0500] [ALPM-SCRIPTLET] ==> dkms install --no-depmod -m v4l2loopback-dc -v 1.4 -k 5.8.9-zen2-1-zen
[2020-09-15T23:32:27-0500] [ALPM-SCRIPTLET] ==> depmod 5.8.9-zen2-1-zen
[2020-09-15T23:32:32-0500] [ALPM-SCRIPTLET] ==> Unable to install module zenpower/0.1.12 for kernel 5.8.9-arch2-1: Missing kernel headers.
[2020-09-15T23:32:32-0500] [ALPM-SCRIPTLET] ==> Unable to install module v4l2loopback-dc/1.4 for kernel 5.8.9-arch2-1: Missing kernel headers.
[2020-09-15T23:32:32-0500] [ALPM-SCRIPTLET] ==> Unable to install module openrazer-driver/2.8.0 for kernel 5.8.9-arch2-1: Missing kernel headers.
[2020-09-15T23:32:32-0500] [ALPM-SCRIPTLET] ==> Unable to install module v4l2loopback/0.12.5 for kernel 5.8.9-arch2-1: Missing kernel headers.
[2020-09-15T23:32:32-0500] [ALPM] running '90-mkinitcpio-install.hook'...
[2020-09-15T23:32:32-0500] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2020-09-15T23:32:32-0500] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2020-09-15T23:32:32-0500] [ALPM-SCRIPTLET] ==> Starting build: 5.8.9-arch2-1
[2020-09-15T23:32:32-0500] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2020-09-15T23:32:32-0500] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2020-09-15T23:32:32-0500] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2020-09-15T23:32:32-0500] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2020-09-15T23:32:32-0500] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2020-09-15T23:32:33-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: xhci_pci
[2020-09-15T23:32:33-0500] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2020-09-15T23:32:33-0500] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2020-09-15T23:32:33-0500] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2020-09-15T23:32:33-0500] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2020-09-15T23:32:33-0500] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
[2020-09-15T23:32:34-0500] [ALPM-SCRIPTLET] ==> Image generation successful
[2020-09-15T23:32:34-0500] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2020-09-15T23:32:34-0500] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2020-09-15T23:32:34-0500] [ALPM-SCRIPTLET] ==> Starting build: 5.8.9-arch2-1
[2020-09-15T23:32:34-0500] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2020-09-15T23:32:34-0500] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2020-09-15T23:32:34-0500] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2020-09-15T23:32:34-0500] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2020-09-15T23:32:35-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2020-09-15T23:32:35-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: wd719x
[2020-09-15T23:32:35-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: xhci_pci
[2020-09-15T23:32:35-0500] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2020-09-15T23:32:36-0500] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2020-09-15T23:32:36-0500] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2020-09-15T23:32:37-0500] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2020-09-15T23:32:37-0500] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
[2020-09-15T23:32:41-0500] [ALPM-SCRIPTLET] ==> Image generation successful
[2020-09-15T23:32:41-0500] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'default'
[2020-09-15T23:32:41-0500] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-zen -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-zen.img
[2020-09-15T23:32:41-0500] [ALPM-SCRIPTLET] ==> Starting build: 5.8.9-zen2-1-zen
[2020-09-15T23:32:41-0500] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2020-09-15T23:32:41-0500] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2020-09-15T23:32:41-0500] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2020-09-15T23:32:41-0500] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2020-09-15T23:32:41-0500] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2020-09-15T23:32:42-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: xhci_pci
[2020-09-15T23:32:42-0500] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2020-09-15T23:32:42-0500] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2020-09-15T23:32:42-0500] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2020-09-15T23:32:42-0500] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2020-09-15T23:32:42-0500] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-zen.img
[2020-09-15T23:32:43-0500] [ALPM-SCRIPTLET] ==> Image generation successful
[2020-09-15T23:32:43-0500] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'fallback'
[2020-09-15T23:32:43-0500] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-zen -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-zen-fallback.img -S autodetect
[2020-09-15T23:32:43-0500] [ALPM-SCRIPTLET] ==> Starting build: 5.8.9-zen2-1-zen
[2020-09-15T23:32:43-0500] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2020-09-15T23:32:43-0500] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2020-09-15T23:32:44-0500] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2020-09-15T23:32:44-0500] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2020-09-15T23:32:44-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2020-09-15T23:32:44-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: wd719x
[2020-09-15T23:32:45-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: xhci_pci
[2020-09-15T23:32:45-0500] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2020-09-15T23:32:46-0500] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2020-09-15T23:32:46-0500] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2020-09-15T23:32:47-0500] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2020-09-15T23:32:47-0500] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-zen-fallback.img
[2020-09-15T23:32:51-0500] [ALPM-SCRIPTLET] ==> Image generation successful
[2020-09-15T23:32:51-0500] [ALPM] running 'update-desktop-database.hook'...

there finishes that day.

I didn't have the microcode package installed, I now have it, but my problem is not fixed.

About LiveUSB problem I really don't now how to test it with the LiveUSB and save the log, cause I don't see anything.

Offline

#10 2020-09-25 09:56:41

Lone_Wolf
Forum Moderator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 11,921

Re: [SOLVED] Radeon RX580 and black screen after an usual update

[2020-09-15T23:32:03-0500] [ALPM-SCRIPTLET] ==> Unable to remove module zenpower/0.1.12 for kernel 5.8.8-arch1-1: Not found in dkms status output.
[2020-09-15T23:32:03-0500] [ALPM-SCRIPTLET] ==> Unable to remove module v4l2loopback/0.12.5 for kernel 5.8.8-arch1-1: Not found in dkms status output.
[2020-09-15T23:32:03-0500] [ALPM-SCRIPTLET] ==> Unable to remove module v4l2loopback-dc/1.4 for kernel 5.8.8-arch1-1: Not found in dkms status output.
[2020-09-15T23:32:03-0500] [ALPM-SCRIPTLET] ==> Unable to remove module openrazer-driver/2.8.0 for kernel 5.8.8-arch1-1: Not found in dkms status output.

2020-09-15T23:32:32-0500] [ALPM-SCRIPTLET] ==> Unable to install module zenpower/0.1.12 for kernel 5.8.9-arch2-1: Missing kernel headers.
[2020-09-15T23:32:32-0500] [ALPM-SCRIPTLET] ==> Unable to install module v4l2loopback-dc/1.4 for kernel 5.8.9-arch2-1: Missing kernel headers.
[2020-09-15T23:32:32-0500] [ALPM-SCRIPTLET] ==> Unable to install module openrazer-driver/2.8.0 for kernel 5.8.9-arch2-1: Missing kernel headers.
[2020-09-15T23:32:32-0500] [ALPM-SCRIPTLET] ==> Unable to install module v4l2loopback/0.12.5 for kernel 5.8.9-arch2-1: Missing kernel headers.

Looks like your dkms setup is incorrect .
The pacman log indicates you have linux and linux-zen installed, but are missing linux-headers .

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.


(A works at time B)  && (time C > time B ) ≠  (A works at time C)

Online

#11 2020-09-25 11:01:51

solskog
Member
Registered: 2020-09-05
Posts: 416

Re: [SOLVED] Radeon RX580 and black screen after an usual update

About LiveUSB problem I really don't now how to test it with the LiveUSB and save the log, cause I don't see anything.

Archiso liveUSB with amdgpu automatically loaded without X, also black screen?

Offline

#12 2020-09-26 00:31:35

Javigo07
Member
Registered: 2020-09-23
Posts: 6

Re: [SOLVED] Radeon RX580 and black screen after an usual update

Archiso liveUSB with amdgpu automatically loaded without X, also black screen?

Yes I got the black screen on LiveUSB too. However I see that amdgpu.dc=0 may help about that and it should work. But I still got stuck into tty on my session, I have to try to use it on LiveUSB.

Looks like your dkms setup is incorrect .
The pacman log indicates you have linux and linux-zen installed, but are missing linux-headers .

As I use Linux-zen, I only have the headers for that. However I installed the headers for Linux normal kernel, it didn't worked too, so................................................. it wasn't the problem.

Offline

#13 2020-09-29 05:00:36

Javigo07
Member
Registered: 2020-09-23
Posts: 6

Re: [SOLVED] Radeon RX580 and black screen after an usual update

I managed to open the LiveUSB with the 

amdgpu.dc=0

so I reinstalled the whole system and worked once again. I think it was because conflicting packages or something like that. However, thank you so much for your help!

Offline

Pages: 1

Board footer

Powered by FluxBB