You are not logged in.

Pages: 1

#1 2020-09-28 21:45:03

dbacc
Member
Registered: 2014-09-25
Posts: 119

Lenovo T14 + external 4k monitor @60Hz via USB-C dock

Hi,

I'm having trouble with getting 4k resolution at 60Hz with an external monitor connected to my Lenovo T14 (AMD) via a USB-C Dock (Lenovo Type C Dock Gen 2).

The dock allows for HDMI and DisplayPort connections, both have troubles (meaning 60Hz does not work in contrast to 30 Hz at 4k resolution)

The Laptop can be connected directly via HDMI which works perfectly, also at 60Hz.

Here are some logs

  xrandr -q
Screen 0: minimum 320 x 200, current 3840 x 2160, maximum 16384 x 16384
eDP connected primary 2880x1620+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
   1920x1080     60.03*+
   1680x1050     60.03  
   1280x1024     60.03  
   1440x900      60.03  
   1280x800      60.03  
   1280x720      60.03  
   1024x768      60.03  
   800x600       60.03  
   640x480       60.03  
HDMI-A-0 disconnected (normal left inverted right x axis y axis)
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
DisplayPort-1 disconnected (normal left inverted right x axis y axis)
DisplayPort-2 disconnected (normal left inverted right x axis y axis)
DisplayPort-3 disconnected (normal left inverted right x axis y axis)
DisplayPort-4 connected 3840x2160+0+0 (normal left inverted right x axis y axis) 600mm x 340mm
   3840x2160     60.00 +  30.00* 
   2560x1440     59.95  
   1920x1080     60.00    59.94  
   1600x900      60.00  
   1280x1024     60.02  
   1280x800      59.81  
   1280x720      60.00    59.94  
   1024x768      60.00  
   800x600       60.32  
   720x480       60.00    59.94  
   640x480       60.00    59.94 
xrandr --output DisplayPort-4 --mode 3840x2160 --rate 60   --output eDP --auto --scale 1.5x1.5
xrandr: Configure crtc 1 failed
[     5.847] (--) Log file renamed from "/var/log/Xorg.pid-1572.log" to "/var/log/Xorg.0.log"
[     5.850] 
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[     5.850] Build Operating System: Linux Arch Linux
[     5.850] Current Operating System: Linux daniel-think 5.8.12-arch1-1 #1 SMP PREEMPT Sat, 26 Sep 2020 21:42:58 +0000 x86_64
[     5.850] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=29b53460-8315-46da-ac55-67611f2f17e1 rw i915.enable_psr=0 netconsole=6555@192.168.42.91/enp0s25,6666@192.168.42.201/ loglevel=7 resume=UUID=29b53460-8315-46da-ac55-67611f2f17e1 resume_offset=15683584
[     5.850] Build Date: 02 September 2020  06:17:44AM
[     5.850]  
[     5.850] Current version of pixman: 0.40.0
[     5.850] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.850] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.850] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 28 22:49:35 2020
[     5.853] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     5.853] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.854] (==) No Layout section.  Using the first Screen section.
[     5.854] (==) No screen section available. Using defaults.
[     5.854] (**) |-->Screen "Default Screen Section" (0)
[     5.854] (**) |   |-->Monitor "<default monitor>"
[     5.855] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.855] (==) Automatically adding devices
[     5.855] (==) Automatically enabling devices
[     5.855] (==) Automatically adding GPU devices
[     5.855] (==) Automatically binding GPU devices
[     5.855] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.856] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[     5.856] 	Entry deleted from font path.
[     5.856] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[     5.856] 	Entry deleted from font path.
[     5.856] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1
[     5.856] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.856] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.856] (II) Module ABI versions:
[     5.856] 	X.Org ANSI C Emulation: 0.4
[     5.856] 	X.Org Video Driver: 24.1
[     5.856] 	X.Org XInput driver : 24.1
[     5.856] 	X.Org Server Extension : 10.0
[     5.857] (++) using VT number 1

[     5.857] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.858] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.858] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:07:00.0/drm/card0
[     5.869] (--) PCI:*(7@0:0:0) 1002:1636:17aa:5081 rev 209, Mem @ 0x460000000/268435456, 0x470000000/2097152, 0xfd300000/524288, I/O @ 0x00001000/256
[     5.869] (II) Open ACPI successful (/var/run/acpid.socket)
[     5.869] (II) LoadModule: "glx"
[     5.870] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.876] (II) Module glx: vendor="X.Org Foundation"
[     5.876] 	compiled for 1.20.9, module version = 1.0.0
[     5.876] 	ABI class: X.Org Server Extension, version 10.0
[     5.876] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[     5.876] 	loading driver: amdgpu
[     5.876] (==) Matched amdgpu as autoconfigured driver 0
[     5.876] (==) Matched ati as autoconfigured driver 1
[     5.876] (==) Matched modesetting as autoconfigured driver 2
[     5.876] (==) Matched fbdev as autoconfigured driver 3
[     5.876] (==) Matched vesa as autoconfigured driver 4
[     5.876] (==) Assigned the driver to the xf86ConfigLayout
[     5.876] (II) LoadModule: "amdgpu"
[     5.877] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[     5.879] (II) Module amdgpu: vendor="X.Org Foundation"
[     5.879] 	compiled for 1.20.8, module version = 19.1.0
[     5.879] 	Module class: X.Org Video Driver
[     5.879] 	ABI class: X.Org Video Driver, version 24.1
[     5.879] (II) LoadModule: "ati"
[     5.879] (WW) Warning, couldn't open module ati
[     5.879] (EE) Failed to load module "ati" (module does not exist, 0)
[     5.879] (II) LoadModule: "modesetting"
[     5.879] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.880] (II) Module modesetting: vendor="X.Org Foundation"
[     5.880] 	compiled for 1.20.9, module version = 1.20.9
[     5.880] 	Module class: X.Org Video Driver
[     5.880] 	ABI class: X.Org Video Driver, version 24.1
[     5.880] (II) LoadModule: "fbdev"
[     5.880] (WW) Warning, couldn't open module fbdev
[     5.880] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     5.880] (II) LoadModule: "vesa"
[     5.880] (WW) Warning, couldn't open module vesa
[     5.880] (EE) Failed to load module "vesa" (module does not exist, 0)
[     5.880] (II) AMDGPU: Driver for AMD Radeon:
	All GPUs supported by the amdgpu kernel driver
[     5.880] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.880] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[     5.881] (WW) Falling back to old probe method for modesetting
[     5.882] (II) AMDGPU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.882] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[     5.882] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[     5.882] (==) AMDGPU(0): Default visual is TrueColor
[     5.882] (==) AMDGPU(0): RGB weight 888
[     5.882] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[     5.882] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x1636)
[     5.882] (II) Loading sub module "fb"
[     5.882] (II) LoadModule: "fb"
[     5.882] (II) Loading /usr/lib/xorg/modules/libfb.so
[     5.882] (II) Module fb: vendor="X.Org Foundation"
[     5.882] 	compiled for 1.20.9, module version = 1.0.0
[     5.882] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.882] (II) Loading sub module "dri2"
[     5.882] (II) LoadModule: "dri2"
[     5.882] (II) Module "dri2" already built-in
[     5.994] (II) Loading sub module "glamoregl"
[     5.994] (II) LoadModule: "glamoregl"
[     5.994] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     5.999] (II) Module glamoregl: vendor="X.Org Foundation"
[     5.999] 	compiled for 1.20.9, module version = 1.0.1
[     5.999] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.015] (II) AMDGPU(0): glamor X acceleration enabled on AMD RENOIR (DRM 3.38.0, 5.8.12-arch1-1, LLVM 10.0.1)
[     6.015] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[     6.015] (==) AMDGPU(0): TearFree property default: auto
[     6.015] (==) AMDGPU(0): VariableRefresh: disabled
[     6.015] (II) AMDGPU(0): KMS Pageflipping: enabled
[     6.015] (II) AMDGPU(0): Output eDP has no monitor section
[     6.015] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[     6.015] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[     6.015] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[     6.034] (II) AMDGPU(0): EDID for output eDP
[     6.034] (II) AMDGPU(0): Manufacturer: AUO  Model: 573d  Serial#: 0
[     6.034] (II) AMDGPU(0): Year: 2018  Week: 0
[     6.034] (II) AMDGPU(0): EDID Version: 1.4
[     6.034] (II) AMDGPU(0): Digital Display Input
[     6.034] (II) AMDGPU(0): 8 bits per channel
[     6.034] (II) AMDGPU(0): Digital interface is DisplayPort
[     6.034] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 31  vert.: 17
[     6.034] (II) AMDGPU(0): Gamma: 2.20
[     6.034] (II) AMDGPU(0): No DPMS capabilities specified
[     6.034] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 
[     6.034] (II) AMDGPU(0): First detailed timing is preferred mode
[     6.034] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[     6.034] (II) AMDGPU(0): redX: 0.645 redY: 0.330   greenX: 0.301 greenY: 0.604
[     6.034] (II) AMDGPU(0): blueX: 0.154 blueY: 0.055   whiteX: 0.313 whiteY: 0.329
[     6.034] (II) AMDGPU(0): Manufacturer's mask: 0
[     6.034] (II) AMDGPU(0): Supported detailed timing:
[     6.034] (II) AMDGPU(0): clock: 142.6 MHz   Image Size:  309 x 174 mm
[     6.034] (II) AMDGPU(0): h_active: 1920  h_sync: 1936  h_sync_end 1952 h_blank_end 2080 h_border: 0
[     6.034] (II) AMDGPU(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1142 v_border: 0
[     6.034] (II) AMDGPU(0): Unknown vendor-specific block f
[     6.034] (II) AMDGPU(0):  AUO
[     6.034] (II) AMDGPU(0):  B140HAN05.7
[     6.034] (II) AMDGPU(0): EDID (in hex):
[     6.034] (II) AMDGPU(0): 	00ffffffffffff0006af3d5700000000
[     6.034] (II) AMDGPU(0): 	001c0104a51f1178022285a5544d9a27
[     6.034] (II) AMDGPU(0): 	0e505400000001010101010101010101
[     6.034] (II) AMDGPU(0): 	010101010101b43780a070383e401010
[     6.034] (II) AMDGPU(0): 	350035ae100000180000000f00000000
[     6.034] (II) AMDGPU(0): 	00000000000000000020000000fe0041
[     6.034] (II) AMDGPU(0): 	554f0a202020202020202020000000fe
[     6.034] (II) AMDGPU(0): 	004231343048414e30352e37200a0070
[     6.034] (II) AMDGPU(0): Printing probed modes for output eDP
[     6.034] (II) AMDGPU(0): Modeline "1920x1080"x60.0  142.60  1920 1936 1952 2080  1080 1083 1088 1142 -hsync -vsync (68.6 kHz eP)
[     6.034] (II) AMDGPU(0): Modeline "1680x1050"x60.0  142.60  1680 1936 1952 2080  1050 1083 1088 1142 -hsync -vsync (68.6 kHz e)
[     6.034] (II) AMDGPU(0): Modeline "1280x1024"x60.0  142.60  1280 1936 1952 2080  1024 1083 1088 1142 -hsync -vsync (68.6 kHz e)
[     6.034] (II) AMDGPU(0): Modeline "1440x900"x60.0  142.60  1440 1936 1952 2080  900 1083 1088 1142 -hsync -vsync (68.6 kHz e)
[     6.034] (II) AMDGPU(0): Modeline "1280x800"x60.0  142.60  1280 1936 1952 2080  800 1083 1088 1142 -hsync -vsync (68.6 kHz e)
[     6.034] (II) AMDGPU(0): Modeline "1280x720"x60.0  142.60  1280 1936 1952 2080  720 1083 1088 1142 -hsync -vsync (68.6 kHz e)
[     6.034] (II) AMDGPU(0): Modeline "1024x768"x60.0  142.60  1024 1936 1952 2080  768 1083 1088 1142 -hsync -vsync (68.6 kHz e)
[     6.034] (II) AMDGPU(0): Modeline "800x600"x60.0  142.60  800 1936 1952 2080  600 1083 1088 1142 -hsync -vsync (68.6 kHz e)
[     6.034] (II) AMDGPU(0): Modeline "640x480"x60.0  142.60  640 1936 1952 2080  480 1083 1088 1142 -hsync -vsync (68.6 kHz e)
[     6.034] (II) AMDGPU(0): EDID for output HDMI-A-0
[     6.034] (II) AMDGPU(0): EDID for output DisplayPort-0
[     6.034] (II) AMDGPU(0): EDID for output DisplayPort-1
[     6.034] (II) AMDGPU(0): Output eDP connected
[     6.034] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[     6.034] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[     6.034] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[     6.034] (II) AMDGPU(0): Using exact sizes for initial modes
[     6.034] (II) AMDGPU(0): Output eDP using initial mode 1920x1080 +0+0
[     6.034] (II) AMDGPU(0): mem size init: gart size :bf6b3000 vram size: s:1e397000 visible:1e397000
[     6.034] (==) AMDGPU(0): DPI set to (96, 96)
[     6.034] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.034] (II) Loading sub module "ramdac"
[     6.035] (II) LoadModule: "ramdac"
[     6.035] (II) Module "ramdac" already built-in
[     6.035] (II) UnloadModule: "modesetting"
[     6.035] (II) Unloading modesetting
[     6.035] (II) AMDGPU(0): [DRI2] Setup complete
[     6.035] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[     6.035] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[     6.095] (II) AMDGPU(0): Front buffer pitch: 7680 bytes
[     6.096] (II) AMDGPU(0): SYNC extension fences enabled
[     6.096] (II) AMDGPU(0): Present extension enabled
[     6.096] (==) AMDGPU(0): DRI3 enabled
[     6.096] (==) AMDGPU(0): Backing store enabled
[     6.096] (II) AMDGPU(0): Direct rendering enabled
[     6.105] (II) AMDGPU(0): Use GLAMOR acceleration.
[     6.105] (II) AMDGPU(0): Acceleration enabled
[     6.105] (==) AMDGPU(0): DPMS enabled
[     6.105] (==) AMDGPU(0): Silken mouse disabled
[     6.106] (II) AMDGPU(0): Set up textured video (glamor)
[     6.118] (II) Initializing extension Generic Event Extension
[     6.118] (II) Initializing extension SHAPE
[     6.118] (II) Initializing extension MIT-SHM
[     6.118] (II) Initializing extension XInputExtension
[     6.118] (II) Initializing extension XTEST
[     6.118] (II) Initializing extension BIG-REQUESTS
[     6.118] (II) Initializing extension SYNC
[     6.118] (II) Initializing extension XKEYBOARD
[     6.118] (II) Initializing extension XC-MISC
[     6.118] (II) Initializing extension SECURITY
[     6.118] (II) Initializing extension XFIXES
[     6.119] (II) Initializing extension RENDER
[     6.119] (II) Initializing extension RANDR
[     6.119] (II) Initializing extension COMPOSITE
[     6.119] (II) Initializing extension DAMAGE
[     6.119] (II) Initializing extension MIT-SCREEN-SAVER
[     6.119] (II) Initializing extension DOUBLE-BUFFER
[     6.120] (II) Initializing extension RECORD
[     6.120] (II) Initializing extension DPMS
[     6.120] (II) Initializing extension Present
[     6.120] (II) Initializing extension DRI3
[     6.120] (II) Initializing extension X-Resource
[     6.120] (II) Initializing extension XVideo
[     6.121] (II) Initializing extension XVideo-MotionCompensation
[     6.121] (II) Initializing extension GLX
[     6.129] (II) AIGLX: Loaded and initialized radeonsi
[     6.129] (II) GLX: Initialized DRI2 GL provider for screen 0
[     6.129] (II) Initializing extension XFree86-VidModeExtension
[     6.129] (II) Initializing extension XFree86-DGA
[     6.129] (II) Initializing extension XFree86-DRI
[     6.129] (II) Initializing extension DRI2
[     6.132] (II) AMDGPU(0): Setting screen physical size to 508 x 285
[     6.208] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[     6.208] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     6.208] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.208] (**) Video Bus: Applying InputClass "system-keyboard"
[     6.208] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.208] (II) LoadModule: "libinput"
[     6.208] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     6.210] (II) Module libinput: vendor="X.Org Foundation"
[     6.210] 	compiled for 1.20.8, module version = 0.30.0
[     6.210] 	Module class: X.Org XInput Driver
[     6.210] 	ABI class: X.Org XInput driver, version 24.1
[     6.210] (II) Using input driver 'libinput' for 'Video Bus'
[     6.210] (**) Video Bus: always reports core events
[     6.210] (**) Option "Device" "/dev/input/event3"
[     6.211] (**) Option "_source" "server/udev"
[     6.216] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[     6.216] (II) event3  - Video Bus: device is a keyboard
[     6.216] (II) event3  - Video Bus: device removed
[     6.230] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input3/event3"
[     6.230] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[     6.230] (**) Option "xkb_model" "pc105"
[     6.230] (**) Option "xkb_layout" "zz,zz"
[     6.230] (**) Option "xkb_variant" "altgr-intl,dvp"
[     6.230] (**) Option "xkb_options" "grp:ctrls_toggle,caps:escape_shifted_capslock"
[     6.257] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[     6.257] (II) event3  - Video Bus: device is a keyboard
[     6.257] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     6.257] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.257] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.257] (**) Power Button: Applying InputClass "system-keyboard"
[     6.257] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.257] (II) Using input driver 'libinput' for 'Power Button'
[     6.257] (**) Power Button: always reports core events
[     6.257] (**) Option "Device" "/dev/input/event0"
[     6.257] (**) Option "_source" "server/udev"
[     6.258] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     6.258] (II) event0  - Power Button: device is a keyboard
[     6.259] (II) event0  - Power Button: device removed
[     6.283] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[     6.283] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     6.283] (**) Option "xkb_model" "pc105"
[     6.283] (**) Option "xkb_layout" "zz,zz"
[     6.283] (**) Option "xkb_variant" "altgr-intl,dvp"
[     6.283] (**) Option "xkb_options" "grp:ctrls_toggle,caps:escape_shifted_capslock"
[     6.285] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     6.285] (II) event0  - Power Button: device is a keyboard
[     6.285] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     6.285] (II) No input driver specified, ignoring this device.
[     6.285] (II) This device may have been added with another device file.
[     6.286] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[     6.286] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     6.286] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     6.286] (**) Sleep Button: Applying InputClass "system-keyboard"
[     6.286] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     6.286] (II) Using input driver 'libinput' for 'Sleep Button'
[     6.286] (**) Sleep Button: always reports core events
[     6.286] (**) Option "Device" "/dev/input/event2"
[     6.286] (**) Option "_source" "server/udev"
[     6.287] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[     6.287] (II) event2  - Sleep Button: device is a keyboard
[     6.287] (II) event2  - Sleep Button: device removed
[     6.315] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[     6.315] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     6.315] (**) Option "xkb_model" "pc105"
[     6.315] (**) Option "xkb_layout" "zz,zz"
[     6.315] (**) Option "xkb_variant" "altgr-intl,dvp"
[     6.315] (**) Option "xkb_options" "grp:ctrls_toggle,caps:escape_shifted_capslock"
[     6.316] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[     6.316] (II) event2  - Sleep Button: device is a keyboard
[     6.317] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event7)
[     6.317] (**) Integrated Camera: Integrated C: Applying InputClass "evdev keyboard catchall"
[     6.317] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[     6.317] (**) Integrated Camera: Integrated C: Applying InputClass "system-keyboard"
[     6.317] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[     6.317] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[     6.317] (**) Integrated Camera: Integrated C: always reports core events
[     6.317] (**) Option "Device" "/dev/input/event7"
[     6.317] (**) Option "_source" "server/udev"
[     6.319] (II) event7  - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[     6.319] (II) event7  - Integrated Camera: Integrated C: device is a keyboard
[     6.319] (II) event7  - Integrated Camera: Integrated C: device removed
[     6.393] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.7/0000:06:00.0/usb2/2-2/2-2:1.0/input/input9/event7"
[     6.393] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 9)
[     6.393] (**) Option "xkb_model" "pc105"
[     6.393] (**) Option "xkb_layout" "zz,zz"
[     6.393] (**) Option "xkb_variant" "altgr-intl,dvp"
[     6.393] (**) Option "xkb_options" "grp:ctrls_toggle,caps:escape_shifted_capslock"
[     6.396] (II) event7  - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[     6.396] (II) event7  - Integrated Camera: Integrated C: device is a keyboard
[     6.397] (II) config/udev: Adding input device Integrated Camera: Integrated I (/dev/input/event8)
[     6.397] (**) Integrated Camera: Integrated I: Applying InputClass "evdev keyboard catchall"
[     6.397] (**) Integrated Camera: Integrated I: Applying InputClass "libinput keyboard catchall"
[     6.397] (**) Integrated Camera: Integrated I: Applying InputClass "system-keyboard"
[     6.397] (**) Integrated Camera: Integrated I: Applying InputClass "libinput keyboard catchall"
[     6.397] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated I'
[     6.397] (**) Integrated Camera: Integrated I: always reports core events
[     6.397] (**) Option "Device" "/dev/input/event8"
[     6.397] (**) Option "_source" "server/udev"
[     6.399] (II) event8  - Integrated Camera: Integrated I: is tagged by udev as: Keyboard
[     6.399] (II) event8  - Integrated Camera: Integrated I: device is a keyboard
[     6.399] (II) event8  - Integrated Camera: Integrated I: device removed
[     6.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.7/0000:06:00.0/usb2/2-2/2-2:1.2/input/input10/event8"
[     6.473] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated I" (type: KEYBOARD, id 10)
[     6.473] (**) Option "xkb_model" "pc105"
[     6.473] (**) Option "xkb_layout" "zz,zz"
[     6.473] (**) Option "xkb_variant" "altgr-intl,dvp"
[     6.473] (**) Option "xkb_options" "grp:ctrls_toggle,caps:escape_shifted_capslock"
[     6.476] (II) event8  - Integrated Camera: Integrated I: is tagged by udev as: Keyboard
[     6.476] (II) event8  - Integrated Camera: Integrated I: device is a keyboard
[     6.477] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event9)
[     6.477] (II) No input driver specified, ignoring this device.
[     6.477] (II) This device may have been added with another device file.
[     6.477] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event10)
[     6.477] (II) No input driver specified, ignoring this device.
[     6.477] (II) This device may have been added with another device file.
[     6.478] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event11)
[     6.478] (II) No input driver specified, ignoring this device.
[     6.478] (II) This device may have been added with another device file.
[     6.478] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[     6.478] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     6.478] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     6.478] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[     6.478] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     6.478] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     6.478] (**) AT Translated Set 2 keyboard: always reports core events
[     6.478] (**) Option "Device" "/dev/input/event4"
[     6.478] (**) Option "_source" "server/udev"
[     6.480] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     6.480] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[     6.481] (II) event4  - AT Translated Set 2 keyboard: device removed
[     6.513] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[     6.513] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[     6.513] (**) Option "xkb_model" "pc105"
[     6.513] (**) Option "xkb_layout" "zz,zz"
[     6.513] (**) Option "xkb_variant" "altgr-intl,dvp"
[     6.513] (**) Option "xkb_options" "grp:ctrls_toggle,caps:escape_shifted_capslock"
[     6.515] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     6.515] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[     6.517] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[     6.517] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     6.517] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[     6.517] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[     6.517] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[     6.517] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     6.517] (**) Option "Device" "/dev/input/event12"
[     6.517] (**) Option "_source" "server/udev"
[     6.518] (II) event12 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[     6.519] (II) event12 - SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm
[     6.521] (II) event12 - SynPS/2 Synaptics TouchPad: device is a touchpad
[     6.521] (II) event12 - SynPS/2 Synaptics TouchPad: device removed
[     6.593] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event12"
[     6.594] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[     6.595] (**) Option "AccelerationScheme" "none"
[     6.595] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[     6.595] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     6.595] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     6.597] (II) event12 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[     6.597] (II) event12 - SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm
[     6.599] (II) event12 - SynPS/2 Synaptics TouchPad: device is a touchpad
[     6.600] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[     6.600] (II) No input driver specified, ignoring this device.
[     6.600] (II) This device may have been added with another device file.
[     6.601] (II) config/udev: Adding input device TPPS/2 Elan TrackPoint (/dev/input/event13)
[     6.601] (**) TPPS/2 Elan TrackPoint: Applying InputClass "evdev pointer catchall"
[     6.601] (**) TPPS/2 Elan TrackPoint: Applying InputClass "libinput pointer catchall"
[     6.601] (**) TPPS/2 Elan TrackPoint: Applying InputClass "libinput pointer catchall"
[     6.601] (II) Using input driver 'libinput' for 'TPPS/2 Elan TrackPoint'
[     6.601] (**) TPPS/2 Elan TrackPoint: always reports core events
[     6.601] (**) Option "Device" "/dev/input/event13"
[     6.601] (**) Option "_source" "server/udev"
[     6.603] (II) event13 - TPPS/2 Elan TrackPoint: is tagged by udev as: Mouse Pointingstick
[     6.603] (II) event13 - TPPS/2 Elan TrackPoint: device is a pointer
[     6.604] (II) event13 - TPPS/2 Elan TrackPoint: device removed
[     6.660] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event13"
[     6.660] (II) XINPUT: Adding extended input device "TPPS/2 Elan TrackPoint" (type: MOUSE, id 13)
[     6.660] (**) Option "AccelerationScheme" "none"
[     6.660] (**) TPPS/2 Elan TrackPoint: (accel) selected scheme none/0
[     6.660] (**) TPPS/2 Elan TrackPoint: (accel) acceleration factor: 2.000
[     6.660] (**) TPPS/2 Elan TrackPoint: (accel) acceleration threshold: 4
[     6.662] (II) event13 - TPPS/2 Elan TrackPoint: is tagged by udev as: Mouse Pointingstick
[     6.662] (II) event13 - TPPS/2 Elan TrackPoint: device is a pointer
[     6.664] (II) config/udev: Adding input device TPPS/2 Elan TrackPoint (/dev/input/mouse1)
[     6.664] (II) No input driver specified, ignoring this device.
[     6.664] (II) This device may have been added with another device file.
[     6.665] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[     6.665] (II) No input driver specified, ignoring this device.
[     6.665] (II) This device may have been added with another device file.
[     6.665] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[     6.665] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[     6.665] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[     6.665] (**) ThinkPad Extra Buttons: Applying InputClass "system-keyboard"
[     6.665] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[     6.665] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[     6.666] (**) ThinkPad Extra Buttons: always reports core events
[     6.666] (**) Option "Device" "/dev/input/event6"
[     6.666] (**) Option "_source" "server/udev"
[     6.667] (II) event6  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[     6.667] (II) event6  - ThinkPad Extra Buttons: device is a keyboard
[     6.667] (II) event6  - ThinkPad Extra Buttons: device removed
[     6.713] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event6"
[     6.713] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[     6.713] (**) Option "xkb_model" "pc105"
[     6.713] (**) Option "xkb_layout" "zz,zz"
[     6.713] (**) Option "xkb_variant" "altgr-intl,dvp"
[     6.713] (**) Option "xkb_options" "grp:ctrls_toggle,caps:escape_shifted_capslock"
[     6.715] (II) event6  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[     6.715] (II) event6  - ThinkPad Extra Buttons: device is a keyboard
[     6.722] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/mouse3)
[     6.722] (II) No input driver specified, ignoring this device.
[     6.722] (II) This device may have been added with another device file.
[     6.723] (II) config/udev: Adding input device Ultimate Gadget Laboratories Ultimate Hacking Keyboard (/dev/input/mouse2)
[     6.723] (II) No input driver specified, ignoring this device.
[     6.723] (II) This device may have been added with another device file.
[     6.724] (II) config/udev: Adding input device Ultimate Gadget Laboratories Ultimate Hacking Keyboard (/dev/input/event17)
[     6.724] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "evdev keyboard catchall"
[     6.724] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.724] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "system-keyboard"
[     6.724] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.724] (II) Using input driver 'libinput' for 'Ultimate Gadget Laboratories Ultimate Hacking Keyboard'
[     6.724] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: always reports core events
[     6.724] (**) Option "Device" "/dev/input/event17"
[     6.724] (**) Option "_source" "server/udev"
[     6.726] (II) event17 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: is tagged by udev as: Keyboard
[     6.727] (II) event17 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: device is a keyboard
[     6.727] (II) event17 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: device removed
[     6.766] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb4/4-1/4-1.3/4-1.3.3/4-1.3.3.3/4-1.3.3.3:1.3/0003:1D50:6122.0006/input/input18/event17"
[     6.766] (II) XINPUT: Adding extended input device "Ultimate Gadget Laboratories Ultimate Hacking Keyboard" (type: KEYBOARD, id 15)
[     6.766] (**) Option "xkb_model" "pc105"
[     6.766] (**) Option "xkb_layout" "zz,zz"
[     6.766] (**) Option "xkb_variant" "altgr-intl,dvp"
[     6.766] (**) Option "xkb_options" "grp:ctrls_toggle,caps:escape_shifted_capslock"
[     6.769] (II) event17 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: is tagged by udev as: Keyboard
[     6.769] (II) event17 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: device is a keyboard
[     6.770] (II) config/udev: Adding input device Lenovo ThinkPad USB-C Dock Gen2 USB Audio (/dev/input/event14)
[     6.770] (**) Lenovo ThinkPad USB-C Dock Gen2 USB Audio: Applying InputClass "evdev keyboard catchall"
[     6.770] (**) Lenovo ThinkPad USB-C Dock Gen2 USB Audio: Applying InputClass "libinput keyboard catchall"
[     6.770] (**) Lenovo ThinkPad USB-C Dock Gen2 USB Audio: Applying InputClass "system-keyboard"
[     6.770] (**) Lenovo ThinkPad USB-C Dock Gen2 USB Audio: Applying InputClass "libinput keyboard catchall"
[     6.770] (II) Using input driver 'libinput' for 'Lenovo ThinkPad USB-C Dock Gen2 USB Audio'
[     6.771] (**) Lenovo ThinkPad USB-C Dock Gen2 USB Audio: always reports core events
[     6.771] (**) Option "Device" "/dev/input/event14"
[     6.771] (**) Option "_source" "server/udev"
[     6.773] (II) event14 - Lenovo ThinkPad USB-C Dock Gen2 USB Audio: is tagged by udev as: Keyboard
[     6.773] (II) event14 - Lenovo ThinkPad USB-C Dock Gen2 USB Audio: device is a keyboard
[     6.774] (II) event14 - Lenovo ThinkPad USB-C Dock Gen2 USB Audio: device removed
[     6.833] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb4/4-1/4-1.3/4-1.3.3/4-1.3.3.2/4-1.3.3.2:1.3/0003:17EF:A396.0002/input/input15/event14"
[     6.833] (II) XINPUT: Adding extended input device "Lenovo ThinkPad USB-C Dock Gen2 USB Audio" (type: KEYBOARD, id 16)
[     6.833] (**) Option "xkb_model" "pc105"
[     6.833] (**) Option "xkb_layout" "zz,zz"
[     6.833] (**) Option "xkb_variant" "altgr-intl,dvp"
[     6.833] (**) Option "xkb_options" "grp:ctrls_toggle,caps:escape_shifted_capslock"
[     6.836] (II) event14 - Lenovo ThinkPad USB-C Dock Gen2 USB Audio: is tagged by udev as: Keyboard
[     6.836] (II) event14 - Lenovo ThinkPad USB-C Dock Gen2 USB Audio: device is a keyboard
[     6.838] (II) config/udev: Adding input device Ultimate Gadget Laboratories Ultimate Hacking Keyboard (/dev/input/event15)
[     6.838] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "evdev keyboard catchall"
[     6.838] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.838] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "system-keyboard"
[     6.838] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.838] (II) Using input driver 'libinput' for 'Ultimate Gadget Laboratories Ultimate Hacking Keyboard'
[     6.838] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: always reports core events
[     6.838] (**) Option "Device" "/dev/input/event15"
[     6.838] (**) Option "_source" "server/udev"
[     6.841] (II) event15 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: is tagged by udev as: Keyboard
[     6.841] (II) event15 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: device is a keyboard
[     6.841] (II) event15 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: device removed
[     6.873] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb4/4-1/4-1.3/4-1.3.3/4-1.3.3.3/4-1.3.3.3:1.1/0003:1D50:6122.0004/input/input16/event15"
[     6.873] (II) XINPUT: Adding extended input device "Ultimate Gadget Laboratories Ultimate Hacking Keyboard" (type: KEYBOARD, id 17)
[     6.873] (**) Option "xkb_model" "pc105"
[     6.873] (**) Option "xkb_layout" "zz,zz"
[     6.873] (**) Option "xkb_variant" "altgr-intl,dvp"
[     6.873] (**) Option "xkb_options" "grp:ctrls_toggle,caps:escape_shifted_capslock"
[     6.876] (II) event15 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: is tagged by udev as: Keyboard
[     6.876] (II) event15 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: device is a keyboard
[     6.878] (II) config/udev: Adding input device Ultimate Gadget Laboratories Ultimate Hacking Keyboard (/dev/input/event16)
[     6.878] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "evdev keyboard catchall"
[     6.878] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.878] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "system-keyboard"
[     6.878] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.878] (II) Using input driver 'libinput' for 'Ultimate Gadget Laboratories Ultimate Hacking Keyboard'
[     6.878] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: always reports core events
[     6.878] (**) Option "Device" "/dev/input/event16"
[     6.878] (**) Option "_source" "server/udev"
[     6.880] (II) event16 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: is tagged by udev as: Keyboard
[     6.881] (II) event16 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: device is a keyboard
[     6.881] (II) event16 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: device removed
[     6.900] (II) libinput: Ultimate Gadget Laboratories Ultimate Hacking Keyboard: needs a virtual subdevice
[     6.900] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb4/4-1/4-1.3/4-1.3.3/4-1.3.3.3/4-1.3.3.3:1.2/0003:1D50:6122.0005/input/input17/event16"
[     6.900] (II) XINPUT: Adding extended input device "Ultimate Gadget Laboratories Ultimate Hacking Keyboard" (type: MOUSE, id 18)
[     6.900] (**) Option "AccelerationScheme" "none"
[     6.900] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: (accel) selected scheme none/0
[     6.900] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: (accel) acceleration factor: 2.000
[     6.900] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: (accel) acceleration threshold: 4
[     6.903] (II) event16 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: is tagged by udev as: Keyboard
[     6.903] (II) event16 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: device is a keyboard
[     6.904] (EE) Failed to open authorization file "/var/run/sddm/{4af18868-5313-413b-b1fe-e7715a819511}": No such file or directory
[     6.904] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "evdev keyboard catchall"
[     6.904] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.904] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "system-keyboard"
[     6.904] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.904] (II) Using input driver 'libinput' for 'Ultimate Gadget Laboratories Ultimate Hacking Keyboard'
[     6.904] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: always reports core events
[     6.905] (**) Option "Device" "/dev/input/event16"
[     6.905] (**) Option "_source" "_driver/libinput"
[     6.905] (II) libinput: Ultimate Gadget Laboratories Ultimate Hacking Keyboard: is a virtual subdevice
[     6.905] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb4/4-1/4-1.3/4-1.3.3/4-1.3.3.3/4-1.3.3.3:1.2/0003:1D50:6122.0005/input/input17/event16"
[     6.905] (II) XINPUT: Adding extended input device "Ultimate Gadget Laboratories Ultimate Hacking Keyboard" (type: KEYBOARD, id 19)
[     6.905] (**) Option "xkb_model" "pc105"
[     6.905] (**) Option "xkb_layout" "zz,zz"
[     6.905] (**) Option "xkb_variant" "altgr-intl,dvp"
[     6.905] (**) Option "xkb_options" "grp:ctrls_toggle,caps:escape_shifted_capslock"
[     6.906] (II) config/udev: Adding input device Ultimate Gadget Laboratories Ultimate Hacking Keyboard (/dev/input/event18)
[     6.906] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "evdev pointer catchall"
[     6.906] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "libinput pointer catchall"
[     6.906] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: Applying InputClass "libinput pointer catchall"
[     6.906] (II) Using input driver 'libinput' for 'Ultimate Gadget Laboratories Ultimate Hacking Keyboard'
[     6.906] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: always reports core events
[     6.906] (**) Option "Device" "/dev/input/event18"
[     6.906] (**) Option "_source" "server/udev"
[     6.965] (II) event18 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: is tagged by udev as: Mouse
[     6.965] (II) event18 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: device is a pointer
[     6.965] (II) event18 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: device removed
[     7.023] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb4/4-1/4-1.3/4-1.3.3/4-1.3.3.3/4-1.3.3.3:1.4/0003:1D50:6122.0007/input/input19/event18"
[     7.023] (II) XINPUT: Adding extended input device "Ultimate Gadget Laboratories Ultimate Hacking Keyboard" (type: MOUSE, id 20)
[     7.023] (**) Option "AccelerationScheme" "none"
[     7.023] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: (accel) selected scheme none/0
[     7.023] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: (accel) acceleration factor: 2.000
[     7.023] (**) Ultimate Gadget Laboratories Ultimate Hacking Keyboard: (accel) acceleration threshold: 4
[     7.082] (II) event18 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: is tagged by udev as: Mouse
[     7.082] (II) event18 - Ultimate Gadget Laboratories Ultimate Hacking Keyboard: device is a pointer
[     7.084] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event20)
[     7.084] (II) No input driver specified, ignoring this device.
[     7.084] (II) This device may have been added with another device file.
[     7.085] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event19)
[     7.085] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "evdev pointer catchall"
[     7.085] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "libinput pointer catchall"
[     7.085] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "libinput pointer catchall"
[     7.085] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Wireless Mouse'
[     7.085] (**) MOSART Semi. 2.4G Wireless Mouse: always reports core events
[     7.085] (**) Option "Device" "/dev/input/event19"
[     7.085] (**) Option "_source" "server/udev"
[     7.087] (II) event19 - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse
[     7.088] (II) event19 - MOSART Semi. 2.4G Wireless Mouse: device is a pointer
[     7.088] (II) event19 - MOSART Semi. 2.4G Wireless Mouse: device removed
[     7.166] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb4/4-1/4-1.3/4-1.3.3/4-1.3.3.4/4-1.3.3.4:1.0/0003:062A:4102.0008/input/input20/event19"
[     7.166] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Wireless Mouse" (type: MOUSE, id 21)
[     7.167] (**) Option "AccelerationScheme" "none"
[     7.167] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) selected scheme none/0
[     7.167] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration factor: 2.000
[     7.167] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration threshold: 4
[     7.225] (II) event19 - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse
[     7.225] (II) event19 - MOSART Semi. 2.4G Wireless Mouse: device is a pointer
[   247.972] (II) AMDGPU(0): EDID vendor "AUO", prod id 22333
[   247.972] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   247.972] (II) AMDGPU(0): Modeline "1920x1080"x0.0  142.60  1920 1936 1952 2080  1080 1083 1088 1142 -hsync -vsync (68.6 kHz eP)
[   247.999] (II) AMDGPU(0): EDID vendor "AUO", prod id 22333
[   247.999] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   247.999] (II) AMDGPU(0): Modeline "1920x1080"x0.0  142.60  1920 1936 1952 2080  1080 1083 1088 1142 -hsync -vsync (68.6 kHz eP)
[   248.006] (II) AMDGPU(0): EDID vendor "AUO", prod id 22333
[   248.006] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   248.006] (II) AMDGPU(0): Modeline "1920x1080"x0.0  142.60  1920 1936 1952 2080  1080 1083 1088 1142 -hsync -vsync (68.6 kHz eP)
...

[  2467.716] (II) AMDGPU(0): EDID vendor "AUO", prod id 22333
[  2467.716] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  2467.716] (II) AMDGPU(0): Modeline "1920x1080"x0.0  142.60  1920 1936 1952 2080  1080 1083 1088 1142 -hsync -vsync (68.6 kHz eP)
[  2467.726] (II) AMDGPU(0): EDID vendor "AUO", prod id 22333
[  2467.726] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  2467.726] (II) AMDGPU(0): Modeline "1920x1080"x0.0  142.60  1920 1936 1952 2080  1080 1083 1088 1142 -hsync -vsync (68.6 kHz eP)
[  2467.736] (II) AMDGPU(0): EDID vendor "AUO", prod id 22333
[  2467.736] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  2467.736] (II) AMDGPU(0): Modeline "1920x1080"x0.0  142.60  1920 1936 1952 2080  1080 1083 1088 1142 -hsync -vsync (68.6 kHz eP)
[  2467.746] (II) AMDGPU(0): EDID vendor "AUO", prod id 22333
[  2467.746] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  2467.746] (II) AMDGPU(0): Modeline "1920x1080"x0.0  142.60  1920 1936 1952 2080  1080 1083 1088 1142 -hsync -vsync (68.6 kHz eP)
[  2467.753] (II) AMDGPU(0): EDID vendor "AUO", prod id 22333
[  2467.753] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  2467.753] (II) AMDGPU(0): Modeline "1920x1080"x0.0  142.60  1920 1936 1952 2080  1080 1083 1088 1142 -hsync -vsync (68.6 kHz eP)
[  2467.760] (II) AMDGPU(0): EDID vendor "AUO", prod id 22333
[  2467.760] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  2467.760] (II) AMDGPU(0): Modeline "1920x1080"x0.0  142.60  1920 1936 1952 2080  1080 1083 1088 1142 -hsync -vsync (68.6 kHz eP)
[  2467.766] (II) AMDGPU(0): EDID vendor "AUO", prod id 22333
[  2467.766] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  2467.766] (II) AMDGPU(0): Modeline "1920x1080"x0.0  142.60  1920 1936 1952 2080  1080 1083 1088 1142 -hsync -vsync (68.6 kHz eP)
[  2467.778] (II) AMDGPU(0): EDID vendor "AUO", prod id 22333
[  2467.778] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  2467.778] (II) AMDGPU(0): Modeline "1920x1080"x0.0  142.60  1920 1936 1952 2080  1080 1083 1088 1142 -hsync -vsync (68.6 kHz eP)
[  2467.785] (II) AMDGPU(0): EDID vendor "AUO", prod id 22333
[  2467.785] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  2467.785] (II) AMDGPU(0): Modeline "1920x1080"x0.0  142.60  1920 1936 1952 2080  1080 1083 1088 1142 -hsync -vsync (68.6 kHz eP)
[  2467.789] (EE) AMDGPU(0): failed to set mode: No space left on device
[  2467.924] (EE) AMDGPU(0): drmmode_do_crtc_dpms cannot get last vblank counter
[  2468.056] (EE) AMDGPU(0): drmmode_do_crtc_dpms cannot get last vblank counter

Offline

#2 2020-09-29 18:16:30

dbacc
Member
Registered: 2014-09-25
Posts: 119

Re: Lenovo T14 + external 4k monitor @60Hz via USB-C dock

I tried updating BIOS and firmware of the Dock with no success. I had to install Windows in order to do that upgrade and indeed, on Windows I can have 60Hz, so this could be a driver issue I suppose.

Where, if not here, would be a good place to ask for further help?

Offline

#3 2020-09-29 19:52:59

euromatlox
Member
Registered: 2017-02-10
Posts: 110

Re: Lenovo T14 + external 4k monitor @60Hz via USB-C dock

Years ago I had to replace laptop power source (psu) to be able to use external monitor with higher resolution. I'm still in that belief, that raising resolution draws more power from psu. I suppose the dock you use uses same power source as laptop (my dock surely does), same psu delivering power for both. One possibility is that if dock is power hungry enough, problem might be underpowered psu.

To be honest, probably another solution, something software related, suits better in your case.

Perhaps better place for you problem is under Laptop Issues.

Last edited by euromatlox (2020-09-29 19:55:32)

Offline

#4 2020-10-11 07:27:36

lxol
Member
Registered: 2020-10-11
Posts: 1

Re: Lenovo T14 + external 4k monitor @60Hz via USB-C dock

Did you manage to fix @60Hz issue? I have exactly the same configuration and only managed to run an external monitor at 30Hz sad

Offline

#5 2020-11-07 14:23:57

chodzikman
Member
Registered: 2020-11-07
Posts: 2

Re: Lenovo T14 + external 4k monitor @60Hz via USB-C dock

Hi!

I have the very same issue on HP Probook 435 G7 (Ryzen 4700U) on USB-C dock - this might be either amdgpu or USB controller related I guess, I can also confirm that 60Hz works on Windows. I have tried it on several kernels (5.9 and 5.10 flavors), changed cables, etc with no luck.

Offline

#6 2020-11-07 15:14:02

seth
Member
Registered: 2012-09-03
Posts: 51,056

Re: Lenovo T14 + external 4k monitor @60Hz via USB-C dock

Try https://wiki.archlinux.org/index.php/Xr … esolutions with

% cvt12 3840 2160 60 -b
# 3840x2160 @ 60.000 Hz Reduced Blank (CVT) field rate 60.000 Hz; hsync: 133.320 kHz; pclk: 522.61 MHz
Modeline "3840x2160_60.00_rb2"  522.61  3840 3848 3880 3920  2160 2208 2216 2222 +hsync -vsync

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2020-11-07 16:24:50

chodzikman
Member
Registered: 2020-11-07
Posts: 2

Re: Lenovo T14 + external 4k monitor @60Hz via USB-C dock

thanks for a hint, unfortunately still no luck

[mchodzikiewicz@probook:~]$ xrandr --output DisplayPort-3 --mode 3840x2160_60.00_rb2
xrandr: Configure crtc 1 failed

Offline

#8 2021-05-11 07:09:25

drizz1e
Member
Registered: 2021-05-11
Posts: 2

Re: Lenovo T14 + external 4k monitor @60Hz via USB-C dock

Hi I'm having exactly the same issue. Windows is OKay but linux is stuck at 30hz. Have you solved your problem? Is it possible that it's a driver problem?

Offline

#9 2021-05-11 07:20:59

seth
Member
Registered: 2012-09-03
Posts: 51,056

Re: Lenovo T14 + external 4k monitor @60Hz via USB-C dock

Does windows tell you anything about the modeline?
Interlaced might work:

cvt12 3840 2160 60 -i
# 3840x2160 @ 60.000 Hz Interlaced (CVT) field rate 59.979 Hz; hsync: 67.207 kHz; pclk: 346.25 MHz
Modeline "3840x2160_60.00i"  346.25  3840 4088 4496 5152  2160 2163 2168 2200 Interlace  -hsync +vsync
# or
cvt12 3840 2160 60 -b -i
# 3840x2160 @ 60.000 Hz Interlaced Reduced Blank (CVT) field rate 60.000 Hz; hsync: 66.690 kHz; pclk: 261.42 MHz
Modeline "3840x2160_60.00i_rb2"  261.42  3840 3848 3880 3920  2160 2177 2185 2191 Interlace  +hsync -vsync

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#10 2021-06-11 20:49:11

koala13
Member
Registered: 2021-06-09
Posts: 1

Re: Lenovo T14 + external 4k monitor @60Hz via USB-C dock

seth wrote:

Does windows tell you anything about the modeline?
Interlaced might work:

cvt12 3840 2160 60 -i
# 3840x2160 @ 60.000 Hz Interlaced (CVT) field rate 59.979 Hz; hsync: 67.207 kHz; pclk: 346.25 MHz
Modeline "3840x2160_60.00i"  346.25  3840 4088 4496 5152  2160 2163 2168 2200 Interlace  -hsync +vsync
# or
cvt12 3840 2160 60 -b -i
# 3840x2160 @ 60.000 Hz Interlaced Reduced Blank (CVT) field rate 60.000 Hz; hsync: 66.690 kHz; pclk: 261.42 MHz
Modeline "3840x2160_60.00i_rb2"  261.42  3840 3848 3880 3920  2160 2177 2185 2191 Interlace  +hsync -vsync

Can you hint me a little on how to test this?

I'm having the same issue as reported in the thread. Direct HDMI connection works in 4k@60hz. Going via the USB-C dock (HDMI and DisplayPort) only allows 4k@30hz.

regards

Offline

#11 2021-06-11 20:56:45

seth
Member
Registered: 2012-09-03
Posts: 51,056

Re: Lenovo T14 + external 4k monitor @60Hz via USB-C dock

https://wiki.archlinux.org/title/Xrandr … esolutions
Try the reduced blanking one first (#6)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#12 2021-06-18 16:39:45

drizz1e
Member
Registered: 2021-05-11
Posts: 2

Re: Lenovo T14 + external 4k monitor @60Hz via USB-C dock

I finally found a workaround, thanks for all suggestions!

My ideal modeline is

➜  ~ cvt 3840 2160 60  
# 3840x2160 59.98 Hz (CVT 8.29M9) hsync: 134.18 kHz; pclk: 712.75 MHz
Modeline "3840x2160_60.00"  712.75  3840 4160 4576 5312  2160 2163 2168 2237 -hsync +vsync

but it doesn't work. The following two don't work for me, either

➜  ~ cvt 3840 2160 50 
# 3840x2160 49.97 Hz (CVT 8.29M9) hsync: 111.17 kHz; pclk: 587.00 MHz
Modeline "3840x2160_50.00"  587.00  3840 4144 4560 5280  2160 2163 2168 2225 -hsync +vsync
➜  ~ cvt -r 3840 2160 60 
# 3840x2160 59.97 Hz (CVT 8.29M9-R) hsync: 133.25 kHz; pclk: 533.00 MHz
Modeline "3840x2160R"  533.00  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsyn

The best setting I can find is

➜  ~ cvt12 3840 2160 50 -b
# 3840x2160 @ 50.000 Hz Reduced Blank (CVT) field rate 50.000 Hz; hsync: 110.550 kHz; pclk: 433.36 MHz
Modeline "3840x2160_50.00_rb2"  433.36  3840 3848 3880 3920  2160 2197 2205 2211 +hsync -vsync

I wrote a script for this

xrandr --newmode nm 433.36  3840 3848 3880 3920  2160 2197 2205 2211 +hsync -vsync
xrandr --addmode $ACTIVE nm
xrandr --output $ACTIVE --mode nm

where $ACTIVE is the current monitor I'm using.

Last edited by drizz1e (2021-06-18 16:40:26)

Offline

Pages: 1

Board footer

Powered by FluxBB