You are not logged in.
I recently got a QNAP QXP-1600eS SATA expansion card. It's based on the Marvell 88SE1475. I can get the bootloader going on a disk attached to this card, but can't seem to find a driver for it. Does anyone know what I'm missing?
Offline
Here's the relevant section of "lspci -vnn", if it helps:
01:00.0 SCSI storage controller [0100]: Marvell Technology Group Ltd. Device [1b4b:1475] (rev a1)
Subsystem: QNAP Systems, Inc. Device [1baa:1852]
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f0000000 (64-bit, prefetchable) [size=1M]
Memory at f0100000 (64-bit, prefetchable) [size=256K]
Expansion ROM at f7d00000 [disabled] [size=128K]
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable- Count=1/32 Maskable+ 64bit+
Capabilities: [b0] MSI-X: Enable- Count=18 Masked-
Capabilities: [c0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [300] Secondary PCI Express
Offline