You are not logged in.
- Topics: Active | Unanswered
#1 2020-10-15 07:00:21
- volker.raschek
- Member
- From: Trier
- Registered: 2017-12-17
- Posts: 9
Microphone connected on Sound Blaster Z does not work
Hey folks,
I have the Sound Blaster Z installed in my computer. The soundcard will be
detected with the currently latest kernel 5.8.14.
Thanks to Conmanx360: https://bbs.archlinux.org/viewtopic.php?id=236364
But in the thread above is only the problem, that thje sound card does stream
anything out. This has been fixed, but I think not the microphone input.
I Have conntect on the SBZ my microphone and I get no input stream. I tried to
record my voice with audacity but I don't hear anything. I increased the volume
with alamixer to 100%, but this does not help.
On my windows system, my microphone works perfectly, therefore i can exclude
that my microphone has an issue.
Is there anyone with the samle problem or has a solution?
Currently is my microphone connected on my motherboard, because it does
not work with my SBZ.
Many greetings
Volker
Appendix:
$ lspci | grep Creative
07:00.0 Audio device: Creative Labs Sound Core3D [Sound Blaster Recon3D / Z-Series] (rev 01)$ pacmd list-sources
6 source(s) available.
index: 0
name: <alsa_output.pci-0000_07_00.0.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1030
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 1999,82 ms
monitor_of: 0
card: 0 <alsa_card.pci-0000_07_00.0>
module: 6
properties:
device.description = "Monitor of Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Creative"
alsa.long_card_name = "HDA Creative at 0xfc404000 irq 42"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:07:00.0"
sysfs.path = "/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:06.0/0000:07:00.0/sound/card0"
device.bus = "pci"
device.vendor.id = "1102"
device.vendor.name = "Creative Labs"
device.product.id = "0012"
device.product.name = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx)"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 1
name: <alsa_input.pci-0000_07_00.0.iec958-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9038
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 1999,82 ms
card: 0 <alsa_card.pci-0000_07_00.0>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "CA0132 Digital"
alsa.id = "CA0132 Digital"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "1"
alsa.card = "0"
alsa.card_name = "HDA Creative"
alsa.long_card_name = "HDA Creative at 0xfc404000 irq 42"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:07:00.0"
sysfs.path = "/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:06.0/0000:07:00.0/sound/card0"
device.bus = "pci"
device.vendor.id = "1102"
device.vendor.name = "Creative Labs"
device.product.id = "0012"
device.product.name = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx)"
device.string = "iec958:0"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "iec958-stereo"
device.profile.description = "Digital Stereo (IEC958)"
device.description = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Digital Stereo (IEC958)"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
iec958-stereo-input: Digital Input (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
properties:
active port: <iec958-stereo-input>
index: 2
name: <alsa_output.pci-0000_0d_00.1.hdmi-stereo-extra2.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1030
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 1999,82 ms
monitor_of: 1
card: 1 <alsa_card.pci-0000_0d_00.1>
module: 7
properties:
device.description = "Monitor of Navi 10 HDMI Audio Digital Stereo (HDMI 3)"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfcba0000 irq 139"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:0d:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:0b:00.0/0000:0c:00.0/0000:0d:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "ab38"
device.product.name = "Navi 10 HDMI Audio"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 3
name: <alsa_input.usb-Ingenic_Semiconductor_CO.__LTD._HD_USB_Camera_Ucamera001-02.multichannel-input>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9040
volume: mono: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le 1ch 16000Hz
channel map: mono
Mono
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
card: 2 <alsa_card.usb-Ingenic_Semiconductor_CO.__LTD._HD_USB_Camera_Ucamera001-02>
module: 8
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "3"
alsa.card_name = "HD USB Camera"
alsa.long_card_name = "Ingenic Semiconductor CO., LTD. HD USB Camera at usb-0000:0f:00.3-2, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:0f:00.3-usb-0:2:1.2"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0f:00.3/usb5/5-2/5-2:1.2/sound/card3"
udev.id = "usb-Ingenic_Semiconductor_CO.__LTD._HD_USB_Camera_Ucamera001-02"
device.bus = "usb"
device.vendor.id = "05a3"
device.vendor.name = "ARC International"
device.product.id = "9331"
device.product.name = "Camera"
device.serial = "Ingenic_Semiconductor_CO.__LTD._HD_USB_Camera_Ucamera001"
device.form_factor = "webcam"
device.string = "hw:3"
device.buffering.buffer_size = "64000"
device.buffering.fragment_size = "32000"
device.access_mode = "mmap+timer"
device.profile.name = "multichannel-input"
device.profile.description = "Mehrkanal"
device.description = "Camera Mehrkanal"
module-udev-detect.discovered = "1"
device.icon_name = "camera-web-usb"
ports:
multichannel-input: Multichannel Input (priority 0, latency offset 0 usec, available: unknown)
properties:
active port: <multichannel-input>
index: 4
name: <alsa_output.pci-0000_0f_00.4.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1030
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 100,14 ms
monitor_of: 2
card: 3 <alsa_card.pci-0000_0f_00.4>
module: 9
properties:
device.description = "Monitor of Starship/Matisse HD Audio Controller Analog Stereo"
device.class = "monitor"
alsa.card = "2"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfca00000 irq 141"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:0f:00.4"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0f:00.4/sound/card2"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "1487"
device.product.name = "Starship/Matisse HD Audio Controller"
device.string = "2"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
* index: 5
name: <alsa_input.pci-0000_0f_00.4.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9039
volume: front-left: 65540 / 100% / 0,00 dB, front-right: 65540 / 100% / 0,00 dB
balance 0,00
base volume: 6554 / 10% / -60,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 100,14 ms
card: 3 <alsa_card.pci-0000_0f_00.4>
module: 9
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC1220 Analog"
alsa.id = "ALC1220 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfca00000 irq 141"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:0f:00.4"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0f:00.4/sound/card2"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "1487"
device.product.name = "Starship/Matisse HD Audio Controller"
device.string = "front:2"
device.buffering.buffer_size = "17664"
device.buffering.fragment_size = "2944"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Starship/Matisse HD Audio Controller Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
properties:
active port: <analog-input-rear-mic>$ dmesg | grep snd
[ 6.451982] snd_hda_intel 0000:07:00.0: enabling device (0000 -> 0002)
[ 6.452064] snd_hda_intel 0000:07:00.0: Disabling MSI
[ 6.452065] snd_hda_intel 0000:07:00.0: Force to non-snoop mode
[ 6.452503] snd_hda_intel 0000:0d:00.1: Force to non-snoop mode
[ 6.452754] snd_hda_intel 0000:0f:00.4: enabling device (0000 -> 0002)
[ 6.460480] snd_hda_intel 0000:0d:00.1: bound 0000:0d:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 6.484481] snd_hda_codec_ca0132 hdaudioC0D1: autoconfig for Sound Blaster Z: line_outs=3 (0xb/0x11/0x10/0x0/0x0) type:line
[ 6.484483] snd_hda_codec_ca0132 hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.484484] snd_hda_codec_ca0132 hdaudioC0D1: hp_outs=1 (0xf/0x0/0x0/0x0/0x0)
[ 6.484495] snd_hda_codec_ca0132 hdaudioC0D1: mono: mono_out=0x0
[ 6.484497] snd_hda_codec_ca0132 hdaudioC0D1: dig-out=0xc/0xd
[ 6.484497] snd_hda_codec_ca0132 hdaudioC0D1: inputs:
[ 6.484498] snd_hda_codec_ca0132 hdaudioC0D1: Mic=0x12
[ 6.484499] snd_hda_codec_ca0132 hdaudioC0D1: Line=0x13
[ 6.484499] snd_hda_codec_ca0132 hdaudioC0D1: dig-in=0xe
[ 6.664069] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC1220: line_outs=3 (0x1b/0x15/0x16/0x0/0x0) type:line
[ 6.664072] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.664074] snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 6.664076] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
[ 6.664078] snd_hda_codec_realtek hdaudioC2D0: dig-out=0x1e/0x0
[ 6.664079] snd_hda_codec_realtek hdaudioC2D0: inputs:
[ 6.664081] snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19
[ 6.664083] snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18
[ 6.664084] snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
[ 6.687436] usbcore: registered new interface driver snd-usb-audio
[ 7.966807] snd_hda_codec_ca0132 hdaudioC0D1: ca0132 DSP downloaded and running
[ 961.322508] Modules linked in: nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype br_netfilter fuse xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp ip6table_mangle ip6table_nat iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter tun overlay bridge stp llc bonding cmac algif_hash algif_skcipher af_alg bnep iwlmvm snd_hda_codec_realtek wmi_bmof mxm_wmi mac80211 snd_hda_codec_generic snd_hda_codec_ca0132 ledtrig_audio edac_mce_amd snd_hda_codec_hdmi nls_iso8859_1 kvm_amd nls_cp437 btusb snd_hda_intel vfat fat snd_intel_dspcfg btrtl snd_usb_audio btbcm kvm libarc4 uvcvideo snd_hda_codec snd_usbmidi_lib btintel irqbypass crct10dif_pclmul crc32_pclmul videobuf2_vmalloc snd_rawmidi ghash_clmulni_intel bluetooth aesni_intel iwlwifi videobuf2_memops snd_hda_core input_leds videobuf2_v4l2 crypto_simd snd_seq_device mousedev joydev cryptd snd_hwdep videobuf2_common
[ 961.322526] glue_helper snd_pcm r8169 ecdh_generic rapl ccp sp5100_tco snd_timer ecc k10temp cfg80211 crc16 realtek pcspkr i2c_piix4 igb rng_core snd soundcore rfkill libphy dca evdev wmi pinctrl_amd mac_hid acpi_cpufreq v4l2loopback(OE) videodev mc sg crypto_user ip_tables x_tables uas usb_storage btrfs blake2b_generic libcrc32c crc32c_generic xor hid_generic usbhid hid raid6_pq crc32c_intel xhci_pci xhci_pci_renesas sr_mod xhci_hcd cdrom amdgpu gpu_sched i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core drm agpgartOffline