You are not logged in.
Hello,
recently my laptop's second fan (gpu fan) doesn't work correctly. At this time my laptop is idle and all sensors shows a low temperature
# sensors
asus-isa-0000
Adapter: ISA adapter
cpu_fan: 0 RPM
BAT0-acpi-0
Adapter: ACPI interface
in0: 16.91 V
curr1: 0.00 A
acpitz-acpi-0
Adapter: ACPI interface
temp1: +38.0 C (crit = +98.0 C)
temp2: +27.8 C (crit = +119.0 C)
iwlwifi_1-virtual-0
Adapter: Virtual device
temp1: +41.0 C
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +37.0 C (high = +100.0 C, crit = +100.0 C)
Core 0: +36.0 C (high = +100.0 C, crit = +100.0 C)
Core 1: +37.0 C (high = +100.0 C, crit = +100.0 C)
Core 2: +36.0 C (high = +100.0 C, crit = +100.0 C)
Core 3: +34.0 C (high = +100.0 C, crit = +100.0 C)
Core 4: +37.0 C (high = +100.0 C, crit = +100.0 C)
Core 5: +35.0 C (high = +100.0 C, crit = +100.0 C)
pch_cannonlake-virtual-0
Adapter: Virtual device
temp1: +44.0 C
nvme-pci-0200
Adapter: PCI adapter
Composite: +26.9 C (low = -0.1 C, high = +76.8 C)
(crit = +79.8 C)
# nvidia-smi
Tue Oct 20 18:07:47 2020
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 455.28 Driver Version: 455.28 CUDA Version: 11.1 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
| | | MIG M. |
|===============================+======================+======================|
| 0 GeForce GTX 1060 Off | 00000000:01:00.0 Off | N/A |
| N/A 39C P8 4W / N/A | 6MiB / 6078MiB | 0% Default |
| | | N/A |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: |
| GPU GI CI PID Type Process name GPU Memory |
| ID ID Usage |
|=============================================================================|
| 0 N/A N/A 1067 G /usr/lib/Xorg 4MiB |
+-----------------------------------------------------------------------------+
But the second fan runs a second and then stops for a second, and continues the circle. So it causes lots of noise, and is even more annoying than constant running.
I have tried using fancontrol, nbfc, asus-nb-wmi, asus_fan. Among them fancontrol and asus-nb-wmi only have control over my first fan (cpu fan), while nbfc seems to make no difference and asus_fan cannot insert its kernel module at all (modprobe: ERROR: could not insert 'asus_fan': No such device)(may be because my laptop is relatively new).
Is there anyway to gain control over the second fan?
--------------------------
This issue has gone after some days. I did nothing. It can't be reproduced.
Last edited by Sffred (2021-01-17 02:35:22)
Offline