You are not logged in.
- Topics: Active | Unanswered
#1 2021-02-25 05:23:25
- Jonny_312
- Member
- Registered: 2021-02-25
- Posts: 9
linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
I have a secondary monitor which is an Acer G276HL monitor. I originally wasn't able to start X, and it would simply crash, so i commented about everything out of my .xinitrc, and found the culprit to be the command "xrandr --output DVI-D-1-2 --primary --left-of DP-3 --auto". I have tried to run many modifications of this command and any command I run which attempts to send video output to this monitor cause what appears to be an Xorg crash, as The screen goes black except for the mouse, and my mouse and keyboard become unresponsive. My suspicion is that there is some driver which I rely on to use that monitor, which is in conflict with linux-5.11.1-arch1-1. Note that my Second Monitor is connected to the GPU(AMD Radeon R9 390x), so this could potentially be a full GPU issue not just the monitor.
Here is some info
xrandr
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 16384 x 16384
HDMI-2 disconnected primary (normal left inverted right x axis y axis)
HDMI-3 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
HDMI-4 disconnected (normal left inverted right x axis y axis)
DP-3 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.02*+ 75.02
1152x864 75.00
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 59.94
720x400 70.08
DVI-D-1-2 connected (normal left inverted right x axis y axis)
1920x1080 60.00 + 59.96 59.93
1680x1050 59.95 59.88
1400x1050 74.76 59.98
1600x900 59.95 59.82
1280x1024 75.02 60.02
1440x900 59.90
1400x900 59.96 59.88
1280x960 60.00
1440x810 59.97
1368x768 59.88 59.85
1280x800 59.99 59.97 59.81 59.91
1152x864 75.00
1280x720 60.00 59.99 59.86 60.00 59.74
1024x768 75.05 60.04 75.03 70.07 60.00
960x720 75.00 60.00
928x696 75.00 60.05
896x672 75.05 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
832x624 74.55
960x540 59.96 59.99 59.63 59.82
800x600 75.00 70.00 65.00 60.00 72.19 75.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 74.76 59.98
800x450 59.95 59.82
640x512 75.02 60.02
700x450 59.96 59.88
640x480 60.00 75.00 72.81 75.00 66.67 59.94
720x405 59.51 58.99
720x400 70.08
684x384 59.88 59.85
640x400 59.88 59.98
576x432 75.00
640x360 59.86 59.83 59.84 59.32
512x384 75.03 70.07 60.00
512x288 60.00 59.92
416x312 74.66
480x270 59.63 59.82
400x300 72.19 75.12 60.32 56.34
432x243 59.92 59.57
320x240 72.81 75.00 60.05
360x202 59.51 59.13
320x180 59.84 59.32
DP-1-1 disconnected (normal left inverted right x axis y axis)
HDMI-1-1 disconnected (normal left inverted right x axis y axis)
DVI-D-1-1 disconnected (normal left inverted right x axis y axis)
1280x1024 (0x49) 135.000MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 79.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.02Hz
1280x1024 (0x48) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz
1152x864 (0x4a) 108.000MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.50KHz
v: height 864 start 865 end 868 total 900 clock 75.00Hz
1024x768 (0x4b) 78.750MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.02KHz
v: height 768 start 769 end 772 total 800 clock 75.03Hz
1024x768 (0x4c) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
800x600 (0x4d) 49.500MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.88KHz
v: height 600 start 601 end 604 total 625 clock 75.00Hz
800x600 (0x4e) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
640x480 (0x4f) 31.500MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.50KHz
v: height 480 start 481 end 484 total 500 clock 75.00Hz
640x480 (0x50) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94Hz
720x400 (0x51) 28.320MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.47KHz
v: height 400 start 412 end 414 total 449 clock 70.08Hz/var/log/Xorg.0.log
[ 4.043]
X.Org X Server 1.20.10
X Protocol Version 11, Revision 0
[ 4.043] Build Operating System: Linux Arch Linux
[ 4.043] Current Operating System: Linux Arch-Desktop 5.11.1-arch1-1 #1 SMP PREEMPT Tue, 23 Feb 2021 14:05:30 +0000 x86_64
[ 4.043] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=2c499807-c174-4bd2-93dc-beba0e70b4c9 rw CONFIG_DRM_AMDGPU_SI=Y radeon.si_support=0 amdgpu.si_support=1 loglevel=3 quiet
[ 4.043] Build Date: 14 December 2020 12:10:29PM
[ 4.043]
[ 4.043] Current version of pixman: 0.40.0
[ 4.043] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.043] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.043] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 24 22:45:51 2021
[ 4.052] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.052] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.057] (==) No Layout section. Using the first Screen section.
[ 4.057] (==) No screen section available. Using defaults.
[ 4.057] (**) |-->Screen "Default Screen Section" (0)
[ 4.057] (**) | |-->Monitor "<default monitor>"
[ 4.057] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.057] (==) Automatically adding devices
[ 4.057] (==) Automatically enabling devices
[ 4.057] (==) Automatically adding GPU devices
[ 4.057] (==) Automatically binding GPU devices
[ 4.057] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.062] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 4.062] Entry deleted from font path.
[ 4.062] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 4.062] Entry deleted from font path.
[ 4.067] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 4.067] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.067] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.067] (II) Module ABI versions:
[ 4.067] X.Org ANSI C Emulation: 0.4
[ 4.067] X.Org Video Driver: 24.1
[ 4.067] X.Org XInput driver : 24.1
[ 4.067] X.Org Server Extension : 10.0
[ 4.067] (++) using VT number 7
[ 4.067] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 4.068] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.068] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4.190] (--) PCI:*(0@0:2:0) 8086:1912:1043:8694 rev 6, Mem @ 0xf6000000/16777216, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 4.190] (--) PCI: (1@0:0:0) 1002:67b0:1682:9395 rev 128, Mem @ 0xe0000000/268435456, 0xf0000000/8388608, 0xf7200000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 4.190] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4.190] (II) LoadModule: "glx"
[ 4.193] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.205] (II) Module glx: vendor="X.Org Foundation"
[ 4.205] compiled for 1.20.10, module version = 1.0.0
[ 4.205] ABI class: X.Org Server Extension, version 10.0
[ 4.205] (==) Matched intel as autoconfigured driver 0
[ 4.205] (==) Matched ati as autoconfigured driver 1
[ 4.205] (==) Matched modesetting as autoconfigured driver 2
[ 4.205] (==) Matched fbdev as autoconfigured driver 3
[ 4.205] (==) Matched vesa as autoconfigured driver 4
[ 4.205] (==) Assigned the driver to the xf86ConfigLayout
[ 4.205] (II) LoadModule: "intel"
[ 4.205] (WW) Warning, couldn't open module intel
[ 4.205] (EE) Failed to load module "intel" (module does not exist, 0)
[ 4.205] (II) LoadModule: "ati"
[ 4.205] (WW) Warning, couldn't open module ati
[ 4.205] (EE) Failed to load module "ati" (module does not exist, 0)
[ 4.205] (II) LoadModule: "modesetting"
[ 4.205] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4.208] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.208] compiled for 1.20.10, module version = 1.20.10
[ 4.208] Module class: X.Org Video Driver
[ 4.208] ABI class: X.Org Video Driver, version 24.1
[ 4.208] (II) LoadModule: "fbdev"
[ 4.208] (WW) Warning, couldn't open module fbdev
[ 4.208] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4.208] (II) LoadModule: "vesa"
[ 4.208] (WW) Warning, couldn't open module vesa
[ 4.208] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4.208] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.321] (II) modeset(0): using drv /dev/dri/card1
[ 4.321] (II) modeset(G0): using drv /dev/dri/card0
[ 4.321] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.321] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 4.321] (==) modeset(0): RGB weight 888
[ 4.321] (==) modeset(0): Default visual is TrueColor
[ 4.321] (II) Loading sub module "glamoregl"
[ 4.322] (II) LoadModule: "glamoregl"
[ 4.322] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 4.327] (II) Module glamoregl: vendor="X.Org Foundation"
[ 4.327] compiled for 1.20.10, module version = 1.0.1
[ 4.327] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.657] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 530 (SKL GT2)
[ 4.657] (II) modeset(0): glamor initialized
[ 4.661] (II) modeset(0): Output HDMI-2 has no monitor section
[ 4.665] (II) modeset(0): Output HDMI-3 has no monitor section
[ 4.665] (II) modeset(0): Output DP-2 has no monitor section
[ 4.668] (II) modeset(0): Output HDMI-4 has no monitor section
[ 4.698] (II) modeset(0): Output DP-3 using monitor section DP-3
[ 4.698] (**) modeset(0): Option "RightOf" "DVI-D-1-2"
[ 4.703] (II) modeset(0): EDID for output HDMI-2
[ 4.706] (II) modeset(0): EDID for output HDMI-3
[ 4.706] (II) modeset(0): EDID for output DP-2
[ 4.710] (II) modeset(0): EDID for output HDMI-4
[ 4.740] (II) modeset(0): EDID for output DP-3
[ 4.740] (II) modeset(0): Manufacturer: DEL Model: a014 Serial#: 960837715
[ 4.740] (II) modeset(0): Year: 2005 Week: 50
[ 4.740] (II) modeset(0): EDID Version: 1.4
[ 4.740] (II) modeset(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 4.740] (II) modeset(0): Sync: Separate
[ 4.740] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 4.740] (II) modeset(0): Gamma: 2.20
[ 4.740] (II) modeset(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 4.740] (II) modeset(0): Default color space is primary color space
[ 4.740] (II) modeset(0): First detailed timing is preferred mode
[ 4.740] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 4.740] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 4.740] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 4.740] (II) modeset(0): Supported established timings:
[ 4.740] (II) modeset(0): 720x400@70Hz
[ 4.740] (II) modeset(0): 640x480@60Hz
[ 4.740] (II) modeset(0): 640x480@75Hz
[ 4.740] (II) modeset(0): 800x600@60Hz
[ 4.740] (II) modeset(0): 800x600@75Hz
[ 4.740] (II) modeset(0): 1024x768@60Hz
[ 4.740] (II) modeset(0): 1024x768@75Hz
[ 4.740] (II) modeset(0): 1280x1024@75Hz
[ 4.740] (II) modeset(0): Manufacturer's mask: 0
[ 4.740] (II) modeset(0): Supported standard timings:
[ 4.740] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 4.740] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 4.740] (II) modeset(0): Supported detailed timing:
[ 4.740] (II) modeset(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 4.740] (II) modeset(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 4.740] (II) modeset(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 4.740] (II) modeset(0): Serial No: T99985CA9E8S
[ 4.740] (II) modeset(0): Monitor name: DELL E176FP
[ 4.740] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 145 MHz
[ 4.740] (II) modeset(0): EDID (in hex):
[ 4.740] (II) modeset(0): 00ffffffffffff0010ac14a053384539
[ 4.740] (II) modeset(0): 320f010468221b78eeee91a3544c9926
[ 4.740] (II) modeset(0): 0f5054a54b00714f8180010101010101
[ 4.740] (II) modeset(0): 010101010101302a009851002a403070
[ 4.740] (II) modeset(0): 1300520e1100001e000000ff00543939
[ 4.740] (II) modeset(0): 3938354341394538530a000000fc0044
[ 4.740] (II) modeset(0): 454c4c204531373646500a20000000fd
[ 4.740] (II) modeset(0): 00384b1f500e000a20202020202000b3
[ 4.740] (II) modeset(0): Printing probed modes for output DP-3
[ 4.740] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 4.740] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 4.740] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 4.740] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 4.740] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4.740] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 4.740] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4.740] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 4.740] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4.740] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4.740] (II) modeset(0): Output HDMI-2 disconnected
[ 4.740] (II) modeset(0): Output HDMI-3 disconnected
[ 4.740] (II) modeset(0): Output DP-2 disconnected
[ 4.740] (II) modeset(0): Output HDMI-4 disconnected
[ 4.740] (II) modeset(0): Output DP-3 connected
[ 4.740] (II) modeset(0): Using user preference for initial modes
[ 4.740] (II) modeset(0): Output DP-3 using initial mode 1280x1024 +0+0
[ 4.740] (EE) modeset(0): Cannot position output DP-3 relative to unknown output DVI-D-1-2
[ 4.740] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.740] (==) modeset(0): DPI set to (96, 96)
[ 4.740] (II) Loading sub module "fb"
[ 4.740] (II) LoadModule: "fb"
[ 4.740] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4.741] (II) Module fb: vendor="X.Org Foundation"
[ 4.741] compiled for 1.20.10, module version = 1.0.0
[ 4.741] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.741] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 4.741] (==) modeset(G0): RGB weight 888
[ 4.741] (==) modeset(G0): Default visual is TrueColor
[ 4.741] (II) Loading sub module "glamoregl"
[ 4.741] (II) LoadModule: "glamoregl"
[ 4.741] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 4.741] (II) Module glamoregl: vendor="X.Org Foundation"
[ 4.741] compiled for 1.20.10, module version = 1.0.1
[ 4.741] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.754] (II) modeset(G0): glamor X acceleration enabled on AMD HAWAII (DRM 2.50.0, 5.11.1-arch1-1, LLVM 11.1.0)
[ 4.754] (II) modeset(G0): glamor initialized
[ 4.794] (II) modeset(G0): Output DP-1-1 has no monitor section
[ 4.795] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[ 4.796] (II) modeset(G0): Output DVI-D-1-1 has no monitor section
[ 4.828] (II) modeset(G0): Output DVI-D-1-2 using monitor section DVI-D-1-2
[ 4.828] (**) modeset(G0): Option "Primary" "true"
[ 4.859] (II) modeset(G0): EDID for output DVI-D-1-2
[ 4.859] (II) modeset(G0): Manufacturer: ACR Model: 300 Serial#: 1410412384
[ 4.859] (II) modeset(G0): Year: 2015 Week: 41
[ 4.859] (II) modeset(G0): EDID Version: 1.3
[ 4.859] (II) modeset(G0): Digital Display Input
[ 4.859] (II) modeset(G0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 4.859] (II) modeset(G0): Gamma: 2.20
[ 4.859] (II) modeset(G0): DPMS capabilities: StandBy Suspend
[ 4.859] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 4.859] (II) modeset(G0): First detailed timing is preferred mode
[ 4.859] (II) modeset(G0): redX: 0.642 redY: 0.335 greenX: 0.291 greenY: 0.636
[ 4.859] (II) modeset(G0): blueX: 0.153 blueY: 0.043 whiteX: 0.313 whiteY: 0.329
[ 4.859] (II) modeset(G0): Supported established timings:
[ 4.859] (II) modeset(G0): 720x400@70Hz
[ 4.859] (II) modeset(G0): 640x480@60Hz
[ 4.859] (II) modeset(G0): 640x480@67Hz
[ 4.859] (II) modeset(G0): 640x480@72Hz
[ 4.859] (II) modeset(G0): 640x480@75Hz
[ 4.859] (II) modeset(G0): 800x600@56Hz
[ 4.859] (II) modeset(G0): 800x600@60Hz
[ 4.859] (II) modeset(G0): 800x600@72Hz
[ 4.859] (II) modeset(G0): 800x600@75Hz
[ 4.859] (II) modeset(G0): 832x624@75Hz
[ 4.859] (II) modeset(G0): 1024x768@60Hz
[ 4.859] (II) modeset(G0): 1024x768@70Hz
[ 4.859] (II) modeset(G0): 1024x768@75Hz
[ 4.859] (II) modeset(G0): 1280x1024@75Hz
[ 4.859] (II) modeset(G0): 1152x864@75Hz
[ 4.859] (II) modeset(G0): Manufacturer's mask: 0
[ 4.859] (II) modeset(G0): Supported standard timings:
[ 4.859] (II) modeset(G0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 4.859] (II) modeset(G0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 4.859] (II) modeset(G0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 4.859] (II) modeset(G0): #3: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 4.859] (II) modeset(G0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 4.859] (II) modeset(G0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 4.859] (II) modeset(G0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 4.859] (II) modeset(G0): #7: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 4.859] (II) modeset(G0): Supported detailed timing:
[ 4.859] (II) modeset(G0): clock: 148.5 MHz Image Size: 598 x 336 mm
[ 4.859] (II) modeset(G0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 4.859] (II) modeset(G0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 4.859] (II) modeset(G0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[ 4.859] (II) modeset(G0): Monitor name: G276HL
[ 4.859] (II) modeset(G0): Serial No: LW9AA0048524
[ 4.859] (II) modeset(G0): EDID (in hex):
[ 4.859] (II) modeset(G0): 00ffffffffffff0004720003602f1154
[ 4.859] (II) modeset(G0): 29190103803c2278ca7b45a4554aa227
[ 4.859] (II) modeset(G0): 0b5054bfef80714f8140818081c08100
[ 4.859] (II) modeset(G0): 9500b300d1c0023a801871382d40582c
[ 4.859] (II) modeset(G0): 450056502100001e000000fd00384c1f
[ 4.859] (II) modeset(G0): 5311000a202020202020000000fc0047
[ 4.859] (II) modeset(G0): 323736484c0a202020202020000000ff
[ 4.859] (II) modeset(G0): 004c57394141303034383532340a00f9
[ 4.859] (II) modeset(G0): Not using default mode "1440x810" (bad mode clock/interlace/doublescan)
[ 4.859] (II) modeset(G0): Not using default mode "1600x900" (bad mode clock/interlace/doublescan)
[ 4.859] (II) modeset(G0): Not using default mode "1600x900" (bad mode clock/interlace/doublescan)
[ 4.859] (II) modeset(G0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[ 4.859] (II) modeset(G0): Printing probed modes for output DVI-D-1-2
[ 4.859] (II) modeset(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 4.859] (II) modeset(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 4.859] (II) modeset(G0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 4.859] (II) modeset(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 4.859] (II) modeset(G0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 4.859] (II) modeset(G0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 4.859] (II) modeset(G0): Modeline "1440x810"x60.0 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1280x800"x60.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1280x800"x60.0 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 4.859] (II) modeset(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 4.859] (II) modeset(G0): Modeline "1280x720"x60.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1280x720"x60.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 4.859] (II) modeset(G0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1024x768"x75.0 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 4.859] (II) modeset(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 4.859] (II) modeset(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4.859] (II) modeset(G0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[ 4.859] (II) modeset(G0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 4.859] (II) modeset(G0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[ 4.859] (II) modeset(G0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 4.859] (II) modeset(G0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[ 4.859] (II) modeset(G0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1024x576"x60.0 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1024x576"x60.0 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 4.859] (II) modeset(G0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 4.859] (II) modeset(G0): Modeline "960x600"x59.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 4.859] (II) modeset(G0): Modeline "960x600"x60.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 4.859] (II) modeset(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 4.859] (II) modeset(G0): Modeline "960x540"x60.0 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 4.859] (II) modeset(G0): Modeline "960x540"x60.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 4.859] (II) modeset(G0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 4.859] (II) modeset(G0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 4.859] (II) modeset(G0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[ 4.859] (II) modeset(G0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[ 4.859] (II) modeset(G0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[ 4.859] (II) modeset(G0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 4.859] (II) modeset(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 4.859] (II) modeset(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 4.859] (II) modeset(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4.859] (II) modeset(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4.859] (II) modeset(G0): Modeline "840x525"x60.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 4.859] (II) modeset(G0): Modeline "840x525"x59.9 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 4.859] (II) modeset(G0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 4.859] (II) modeset(G0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 4.859] (II) modeset(G0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[ 4.859] (II) modeset(G0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 4.859] (II) modeset(G0): Modeline "800x450"x59.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 4.859] (II) modeset(G0): Modeline "800x450"x59.8 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 4.859] (II) modeset(G0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[ 4.859] (II) modeset(G0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 4.859] (II) modeset(G0): Modeline "700x450"x60.0 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 4.859] (II) modeset(G0): Modeline "700x450"x59.9 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 4.859] (II) modeset(G0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 4.859] (II) modeset(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 4.859] (II) modeset(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 4.859] (II) modeset(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[ 4.859] (II) modeset(G0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 4.859] (II) modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4.859] (II) modeset(G0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 4.859] (II) modeset(G0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 4.859] (II) modeset(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4.859] (II) modeset(G0): Modeline "684x384"x59.9 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 4.859] (II) modeset(G0): Modeline "684x384"x59.9 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 4.859] (II) modeset(G0): Modeline "640x400"x59.9 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 4.859] (II) modeset(G0): Modeline "640x400"x60.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 4.859] (II) modeset(G0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[ 4.859] (II) modeset(G0): Modeline "640x360"x59.9 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 4.859] (II) modeset(G0): Modeline "640x360"x59.8 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 4.859] (II) modeset(G0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 4.859] (II) modeset(G0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 4.859] (II) modeset(G0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[ 4.859] (II) modeset(G0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[ 4.859] (II) modeset(G0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 4.859] (II) modeset(G0): Modeline "512x288"x60.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 4.859] (II) modeset(G0): Modeline "512x288"x59.9 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 4.859] (II) modeset(G0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[ 4.859] (II) modeset(G0): Modeline "480x270"x59.6 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 4.859] (II) modeset(G0): Modeline "480x270"x59.8 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 4.859] (II) modeset(G0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[ 4.859] (II) modeset(G0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[ 4.860] (II) modeset(G0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 4.860] (II) modeset(G0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 4.860] (II) modeset(G0): Modeline "432x243"x59.9 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 4.860] (II) modeset(G0): Modeline "432x243"x59.6 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 4.860] (II) modeset(G0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[ 4.860] (II) modeset(G0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[ 4.860] (II) modeset(G0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 4.860] (II) modeset(G0): Modeline "360x202"x59.5 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 4.860] (II) modeset(G0): Modeline "360x202"x59.1 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 4.860] (II) modeset(G0): Modeline "320x180"x59.8 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 4.860] (II) modeset(G0): Modeline "320x180"x59.3 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 4.901] (II) modeset(G0): EDID for output DP-1-1
[ 4.902] (II) modeset(G0): EDID for output HDMI-1-1
[ 4.904] (II) modeset(G0): EDID for output DVI-D-1-1
[ 4.904] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.904] (==) modeset(G0): DPI set to (96, 96)
[ 4.904] (II) Loading sub module "fb"
[ 4.904] (II) LoadModule: "fb"
[ 4.904] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4.904] (II) Module fb: vendor="X.Org Foundation"
[ 4.904] compiled for 1.20.10, module version = 1.0.0
[ 4.904] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.927] (==) modeset(0): Backing store enabled
[ 4.927] (==) modeset(0): Silken mouse disabled
[ 5.004] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 5.005] (==) modeset(0): DPMS enabled
[ 5.005] (II) modeset(0): [DRI2] Setup complete
[ 5.005] (II) modeset(0): [DRI2] DRI driver: iris
[ 5.005] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 5.023] (==) modeset(G0): Backing store enabled
[ 5.023] (==) modeset(G0): Silken mouse disabled
[ 5.024] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 5.024] (==) modeset(G0): DPMS enabled
[ 5.024] (II) modeset(G0): [DRI2] Setup complete
[ 5.024] (II) modeset(G0): [DRI2] DRI driver: radeonsi
[ 5.024] (II) modeset(G0): [DRI2] VDPAU driver: radeonsi
[ 5.024] (II) Initializing extension Generic Event Extension
[ 5.025] (II) Initializing extension SHAPE
[ 5.025] (II) Initializing extension MIT-SHM
[ 5.025] (II) Initializing extension XInputExtension
[ 5.026] (II) Initializing extension XTEST
[ 5.026] (II) Initializing extension BIG-REQUESTS
[ 5.026] (II) Initializing extension SYNC
[ 5.027] (II) Initializing extension XKEYBOARD
[ 5.027] (II) Initializing extension XC-MISC
[ 5.027] (II) Initializing extension SECURITY
[ 5.028] (II) Initializing extension XFIXES
[ 5.028] (II) Initializing extension RENDER
[ 5.028] (II) Initializing extension RANDR
[ 5.029] (II) Initializing extension COMPOSITE
[ 5.029] (II) Initializing extension DAMAGE
[ 5.030] (II) Initializing extension MIT-SCREEN-SAVER
[ 5.030] (II) Initializing extension DOUBLE-BUFFER
[ 5.030] (II) Initializing extension RECORD
[ 5.031] (II) Initializing extension DPMS
[ 5.031] (II) Initializing extension Present
[ 5.031] (II) Initializing extension DRI3
[ 5.031] (II) Initializing extension X-Resource
[ 5.032] (II) Initializing extension XVideo
[ 5.032] (II) Initializing extension XVideo-MotionCompensation
[ 5.032] (II) Initializing extension GLX
[ 5.056] (II) AIGLX: Loaded and initialized iris
[ 5.056] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5.056] (II) Initializing extension XFree86-VidModeExtension
[ 5.056] (II) Initializing extension XFree86-DGA
[ 5.056] (II) Initializing extension XFree86-DRI
[ 5.056] (II) Initializing extension DRI2
[ 5.108] (II) modeset(G0): Damage tracking initialized
[ 5.108] (II) modeset(0): Damage tracking initialized
[ 5.108] (II) modeset(0): Setting screen physical size to 338 x 270
[ 5.186] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 5.186] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.186] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5.186] (II) LoadModule: "libinput"
[ 5.186] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 5.192] (II) Module libinput: vendor="X.Org Foundation"
[ 5.192] compiled for 1.20.8, module version = 0.30.0
[ 5.192] Module class: X.Org XInput Driver
[ 5.192] ABI class: X.Org XInput driver, version 24.1
[ 5.192] (II) Using input driver 'libinput' for 'Power Button'
[ 5.192] (**) Power Button: always reports core events
[ 5.192] (**) Option "Device" "/dev/input/event2"
[ 5.192] (**) Option "_source" "server/udev"
[ 5.200] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 5.200] (II) event2 - Power Button: device is a keyboard
[ 5.200] (II) event2 - Power Button: device removed
[ 5.216] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 5.216] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5.218] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 5.218] (II) event2 - Power Button: device is a keyboard
[ 5.220] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 5.220] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 5.220] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 5.220] (II) Using input driver 'libinput' for 'Video Bus'
[ 5.220] (**) Video Bus: always reports core events
[ 5.220] (**) Option "Device" "/dev/input/event6"
[ 5.220] (**) Option "_source" "server/udev"
[ 5.222] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 5.222] (II) event6 - Video Bus: device is a keyboard
[ 5.222] (II) event6 - Video Bus: device removed
[ 5.296] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event6"
[ 5.296] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 5.298] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 5.298] (II) event6 - Video Bus: device is a keyboard
[ 5.300] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 5.300] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.300] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5.300] (II) Using input driver 'libinput' for 'Power Button'
[ 5.300] (**) Power Button: always reports core events
[ 5.300] (**) Option "Device" "/dev/input/event1"
[ 5.300] (**) Option "_source" "server/udev"
[ 5.302] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 5.302] (II) event1 - Power Button: device is a keyboard
[ 5.302] (II) event1 - Power Button: device removed
[ 5.336] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 5.336] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 5.338] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 5.338] (II) event1 - Power Button: device is a keyboard
[ 5.340] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 5.340] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 5.340] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 5.340] (II) Using input driver 'libinput' for 'Sleep Button'
[ 5.340] (**) Sleep Button: always reports core events
[ 5.340] (**) Option "Device" "/dev/input/event0"
[ 5.340] (**) Option "_source" "server/udev"
[ 5.342] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 5.342] (II) event0 - Sleep Button: device is a keyboard
[ 5.342] (II) event0 - Sleep Button: device removed
[ 5.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 5.376] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 5.378] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 5.378] (II) event0 - Sleep Button: device is a keyboard
[ 5.381] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event9)
[ 5.381] (II) No input driver specified, ignoring this device.
[ 5.381] (II) This device may have been added with another device file.
[ 5.381] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event10)
[ 5.381] (II) No input driver specified, ignoring this device.
[ 5.381] (II) This device may have been added with another device file.
[ 5.381] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event11)
[ 5.381] (II) No input driver specified, ignoring this device.
[ 5.381] (II) This device may have been added with another device file.
[ 5.382] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event12)
[ 5.382] (II) No input driver specified, ignoring this device.
[ 5.382] (II) This device may have been added with another device file.
[ 5.382] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event13)
[ 5.382] (II) No input driver specified, ignoring this device.
[ 5.382] (II) This device may have been added with another device file.
[ 5.382] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event14)
[ 5.382] (II) No input driver specified, ignoring this device.
[ 5.382] (II) This device may have been added with another device file.
[ 5.383] (II) config/udev: Adding input device Blue Microphones Yeti Stereo Microphone Consumer Control (/dev/input/event17)
[ 5.383] (**) Blue Microphones Yeti Stereo Microphone Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 5.383] (**) Blue Microphones Yeti Stereo Microphone Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 5.383] (II) Using input driver 'libinput' for 'Blue Microphones Yeti Stereo Microphone Consumer Control'
[ 5.383] (**) Blue Microphones Yeti Stereo Microphone Consumer Control: always reports core events
[ 5.383] (**) Option "Device" "/dev/input/event17"
[ 5.383] (**) Option "_source" "server/udev"
[ 5.383] (II) event17 - Blue Microphones Yeti Stereo Microphone Consumer Control: is tagged by udev as: Keyboard
[ 5.383] (II) event17 - Blue Microphones Yeti Stereo Microphone Consumer Control: device is a keyboard
[ 5.383] (II) event17 - Blue Microphones Yeti Stereo Microphone Consumer Control: device removed
[ 5.442] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.3/0003:B58E:9E84.0003/input/input27/event17"
[ 5.442] (II) XINPUT: Adding extended input device "Blue Microphones Yeti Stereo Microphone Consumer Control" (type: KEYBOARD, id 10)
[ 5.446] (II) event17 - Blue Microphones Yeti Stereo Microphone Consumer Control: is tagged by udev as: Keyboard
[ 5.446] (II) event17 - Blue Microphones Yeti Stereo Microphone Consumer Control: device is a keyboard
[ 5.448] (II) config/udev: Adding input device E-Signal USB Gaming Mouse (/dev/input/event29)
[ 5.449] (**) E-Signal USB Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 5.449] (**) E-Signal USB Gaming Mouse: Applying InputClass "libinput pointer catchall"
[ 5.449] (II) Using input driver 'libinput' for 'E-Signal USB Gaming Mouse'
[ 5.449] (**) E-Signal USB Gaming Mouse: always reports core events
[ 5.449] (**) Option "Device" "/dev/input/event29"
[ 5.449] (**) Option "_source" "server/udev"
[ 5.508] (II) event29 - E-Signal USB Gaming Mouse: is tagged by udev as: Mouse
[ 5.509] (II) event29 - E-Signal USB Gaming Mouse: device is a pointer
[ 5.509] (II) event29 - E-Signal USB Gaming Mouse: device removed
[ 5.576] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:1B80:B40D.0004/input/input33/event29"
[ 5.576] (II) XINPUT: Adding extended input device "E-Signal USB Gaming Mouse" (type: MOUSE, id 11)
[ 5.576] (**) Option "AccelerationScheme" "none"
[ 5.576] (**) E-Signal USB Gaming Mouse: (accel) selected scheme none/0
[ 5.576] (**) E-Signal USB Gaming Mouse: (accel) acceleration factor: 2.000
[ 5.576] (**) E-Signal USB Gaming Mouse: (accel) acceleration threshold: 4
[ 5.635] (II) event29 - E-Signal USB Gaming Mouse: is tagged by udev as: Mouse
[ 5.635] (II) event29 - E-Signal USB Gaming Mouse: device is a pointer
[ 5.638] (II) config/udev: Adding input device E-Signal USB Gaming Mouse (/dev/input/mouse0)
[ 5.638] (II) No input driver specified, ignoring this device.
[ 5.638] (II) This device may have been added with another device file.
[ 5.639] (II) config/udev: Adding input device E-Signal USB Gaming Mouse Keyboard (/dev/input/event30)
[ 5.639] (**) E-Signal USB Gaming Mouse Keyboard: Applying InputClass "evdev keyboard catchall"
[ 5.639] (**) E-Signal USB Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[ 5.639] (II) Using input driver 'libinput' for 'E-Signal USB Gaming Mouse Keyboard'
[ 5.639] (**) E-Signal USB Gaming Mouse Keyboard: always reports core events
[ 5.640] (**) Option "Device" "/dev/input/event30"
[ 5.640] (**) Option "_source" "server/udev"
[ 5.643] (II) event30 - E-Signal USB Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[ 5.643] (II) event30 - E-Signal USB Gaming Mouse Keyboard: device is a keyboard
[ 5.644] (II) event30 - E-Signal USB Gaming Mouse Keyboard: device removed
[ 5.669] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:1B80:B40D.0005/input/input34/event30"
[ 5.669] (II) XINPUT: Adding extended input device "E-Signal USB Gaming Mouse Keyboard" (type: KEYBOARD, id 12)
[ 5.673] (II) event30 - E-Signal USB Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[ 5.673] (II) event30 - E-Signal USB Gaming Mouse Keyboard: device is a keyboard
[ 5.675] (II) config/udev: Adding input device E-Signal USB Gaming Mouse System Control (/dev/input/event31)
[ 5.675] (**) E-Signal USB Gaming Mouse System Control: Applying InputClass "evdev keyboard catchall"
[ 5.675] (**) E-Signal USB Gaming Mouse System Control: Applying InputClass "libinput keyboard catchall"
[ 5.675] (II) Using input driver 'libinput' for 'E-Signal USB Gaming Mouse System Control'
[ 5.675] (**) E-Signal USB Gaming Mouse System Control: always reports core events
[ 5.675] (**) Option "Device" "/dev/input/event31"
[ 5.675] (**) Option "_source" "server/udev"
[ 5.679] (II) event31 - E-Signal USB Gaming Mouse System Control: is tagged by udev as: Keyboard
[ 5.679] (II) event31 - E-Signal USB Gaming Mouse System Control: device is a keyboard
[ 5.679] (II) event31 - E-Signal USB Gaming Mouse System Control: device removed
[ 5.709] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:1B80:B40D.0005/input/input35/event31"
[ 5.709] (II) XINPUT: Adding extended input device "E-Signal USB Gaming Mouse System Control" (type: KEYBOARD, id 13)
[ 5.713] (II) event31 - E-Signal USB Gaming Mouse System Control: is tagged by udev as: Keyboard
[ 5.713] (II) event31 - E-Signal USB Gaming Mouse System Control: device is a keyboard
[ 5.715] (II) config/udev: Adding input device E-Signal USB Gaming Mouse Consumer Control (/dev/input/event256)
[ 5.715] (**) E-Signal USB Gaming Mouse Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 5.715] (**) E-Signal USB Gaming Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 5.715] (II) Using input driver 'libinput' for 'E-Signal USB Gaming Mouse Consumer Control'
[ 5.715] (**) E-Signal USB Gaming Mouse Consumer Control: always reports core events
[ 5.715] (**) Option "Device" "/dev/input/event256"
[ 5.715] (**) Option "_source" "server/udev"
[ 5.719] (II) event256 - E-Signal USB Gaming Mouse Consumer Control: is tagged by udev as: Keyboard
[ 5.719] (II) event256 - E-Signal USB Gaming Mouse Consumer Control: device is a keyboard
[ 5.719] (II) event256 - E-Signal USB Gaming Mouse Consumer Control: device removed
[ 5.749] (II) libinput: E-Signal USB Gaming Mouse Consumer Control: needs a virtual subdevice
[ 5.749] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:1B80:B40D.0005/input/input36/event256"
[ 5.749] (II) XINPUT: Adding extended input device "E-Signal USB Gaming Mouse Consumer Control" (type: MOUSE, id 14)
[ 5.749] (**) Option "AccelerationScheme" "none"
[ 5.749] (**) E-Signal USB Gaming Mouse Consumer Control: (accel) selected scheme none/0
[ 5.749] (**) E-Signal USB Gaming Mouse Consumer Control: (accel) acceleration factor: 2.000
[ 5.749] (**) E-Signal USB Gaming Mouse Consumer Control: (accel) acceleration threshold: 4
[ 5.753] (II) event256 - E-Signal USB Gaming Mouse Consumer Control: is tagged by udev as: Keyboard
[ 5.753] (II) event256 - E-Signal USB Gaming Mouse Consumer Control: device is a keyboard
[ 5.755] (II) config/udev: Adding input device E-Signal USB Gaming Mouse (/dev/input/event257)
[ 5.755] (II) No input driver specified, ignoring this device.
[ 5.755] (II) This device may have been added with another device file.
[ 5.757] (II) config/udev: Adding input device E-Signal USB Gaming Mouse (/dev/input/js1)
[ 5.757] (II) No input driver specified, ignoring this device.
[ 5.757] (II) This device may have been added with another device file.
[ 5.758] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event7)
[ 5.758] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 5.758] (**) USB USB Keykoard: Applying InputClass "libinput keyboard catchall"
[ 5.758] (II) Using input driver 'libinput' for 'USB USB Keykoard'
[ 5.759] (**) USB USB Keykoard: always reports core events
[ 5.759] (**) Option "Device" "/dev/input/event7"
[ 5.759] (**) Option "_source" "server/udev"
[ 5.762] (II) event7 - USB USB Keykoard: is tagged by udev as: Keyboard
[ 5.762] (II) event7 - USB USB Keykoard: device is a keyboard
[ 5.763] (II) event7 - USB USB Keykoard: device removed
[ 5.789] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:1A2C:0002.0001/input/input10/event7"
[ 5.789] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 15)
[ 5.793] (II) event7 - USB USB Keykoard: is tagged by udev as: Keyboard
[ 5.793] (II) event7 - USB USB Keykoard: device is a keyboard
[ 5.795] (II) config/udev: Adding input device USB USB Keykoard Consumer Control (/dev/input/event15)
[ 5.795] (**) USB USB Keykoard Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 5.795] (**) USB USB Keykoard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 5.795] (II) Using input driver 'libinput' for 'USB USB Keykoard Consumer Control'
[ 5.796] (**) USB USB Keykoard Consumer Control: always reports core events
[ 5.796] (**) Option "Device" "/dev/input/event15"
[ 5.796] (**) Option "_source" "server/udev"
[ 5.799] (II) event15 - USB USB Keykoard Consumer Control: is tagged by udev as: Keyboard
[ 5.799] (II) event15 - USB USB Keykoard Consumer Control: device is a keyboard
[ 5.800] (II) event15 - USB USB Keykoard Consumer Control: device removed
[ 5.842] (II) libinput: USB USB Keykoard Consumer Control: needs a virtual subdevice
[ 5.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:1A2C:0002.0002/input/input18/event15"
[ 5.842] (II) XINPUT: Adding extended input device "USB USB Keykoard Consumer Control" (type: MOUSE, id 16)
[ 5.843] (**) Option "AccelerationScheme" "none"
[ 5.843] (**) USB USB Keykoard Consumer Control: (accel) selected scheme none/0
[ 5.843] (**) USB USB Keykoard Consumer Control: (accel) acceleration factor: 2.000
[ 5.843] (**) USB USB Keykoard Consumer Control: (accel) acceleration threshold: 4
[ 5.846] (II) event15 - USB USB Keykoard Consumer Control: is tagged by udev as: Keyboard
[ 5.846] (II) event15 - USB USB Keykoard Consumer Control: device is a keyboard
[ 5.848] (II) config/udev: Adding input device USB USB Keykoard System Control (/dev/input/event16)
[ 5.849] (**) USB USB Keykoard System Control: Applying InputClass "evdev keyboard catchall"
[ 5.849] (**) USB USB Keykoard System Control: Applying InputClass "libinput keyboard catchall"
[ 5.849] (II) Using input driver 'libinput' for 'USB USB Keykoard System Control'
[ 5.849] (**) USB USB Keykoard System Control: always reports core events
[ 5.849] (**) Option "Device" "/dev/input/event16"
[ 5.849] (**) Option "_source" "server/udev"
[ 5.852] (II) event16 - USB USB Keykoard System Control: is tagged by udev as: Keyboard
[ 5.852] (II) event16 - USB USB Keykoard System Control: device is a keyboard
[ 5.852] (II) event16 - USB USB Keykoard System Control: device removed
[ 5.882] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:1A2C:0002.0002/input/input19/event16"
[ 5.882] (II) XINPUT: Adding extended input device "USB USB Keykoard System Control" (type: KEYBOARD, id 17)
[ 5.886] (II) event16 - USB USB Keykoard System Control: is tagged by udev as: Keyboard
[ 5.886] (II) event16 - USB USB Keykoard System Control: device is a keyboard
[ 5.888] (II) config/udev: Adding input device Afterglow Gamepad for Xbox 360 (/dev/input/event8)
[ 5.888] (II) No input driver specified, ignoring this device.
[ 5.888] (II) This device may have been added with another device file.
[ 5.890] (II) config/udev: Adding input device Afterglow Gamepad for Xbox 360 (/dev/input/js0)
[ 5.890] (II) No input driver specified, ignoring this device.
[ 5.890] (II) This device may have been added with another device file.
[ 5.892] (II) config/udev: Adding input device Microsoft® LifeCam HD-3000: Mi (/dev/input/event5)
[ 5.892] (**) Microsoft® LifeCam HD-3000: Mi: Applying InputClass "evdev keyboard catchall"
[ 5.892] (**) Microsoft® LifeCam HD-3000: Mi: Applying InputClass "libinput keyboard catchall"
[ 5.892] (II) Using input driver 'libinput' for 'Microsoft® LifeCam HD-3000: Mi'
[ 5.892] (**) Microsoft® LifeCam HD-3000: Mi: always reports core events
[ 5.892] (**) Option "Device" "/dev/input/event5"
[ 5.892] (**) Option "_source" "server/udev"
[ 5.895] (II) event5 - Microsoft® LifeCam HD-3000: Mi: is tagged by udev as: Keyboard
[ 5.895] (II) event5 - Microsoft® LifeCam HD-3000: Mi: device is a keyboard
[ 5.895] (II) event5 - Microsoft® LifeCam HD-3000: Mi: device removed
[ 5.949] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.0/0000:03:00.0/usb3/3-1/3-1:1.0/input/input8/event5"
[ 5.949] (II) XINPUT: Adding extended input device "Microsoft® LifeCam HD-3000: Mi" (type: KEYBOARD, id 18)
[ 5.952] (II) event5 - Microsoft® LifeCam HD-3000: Mi: is tagged by udev as: Keyboard
[ 5.953] (II) event5 - Microsoft® LifeCam HD-3000: Mi: device is a keyboard
[ 5.954] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event18)
[ 5.954] (II) No input driver specified, ignoring this device.
[ 5.954] (II) This device may have been added with another device file.
[ 5.955] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event19)
[ 5.955] (II) No input driver specified, ignoring this device.
[ 5.955] (II) This device may have been added with another device file.
[ 5.956] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event20)
[ 5.956] (II) No input driver specified, ignoring this device.
[ 5.956] (II) This device may have been added with another device file.
[ 5.957] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event21)
[ 5.957] (II) No input driver specified, ignoring this device.
[ 5.957] (II) This device may have been added with another device file.
[ 5.958] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event22)
[ 5.958] (II) No input driver specified, ignoring this device.
[ 5.958] (II) This device may have been added with another device file.
[ 5.959] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event23)
[ 5.959] (II) No input driver specified, ignoring this device.
[ 5.959] (II) This device may have been added with another device file.
[ 5.960] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event24)
[ 5.960] (II) No input driver specified, ignoring this device.
[ 5.960] (II) This device may have been added with another device file.
[ 5.961] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event25)
[ 5.961] (II) No input driver specified, ignoring this device.
[ 5.961] (II) This device may have been added with another device file.
[ 5.962] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event26)
[ 5.962] (II) No input driver specified, ignoring this device.
[ 5.962] (II) This device may have been added with another device file.
[ 5.963] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event27)
[ 5.963] (II) No input driver specified, ignoring this device.
[ 5.963] (II) This device may have been added with another device file.
[ 5.964] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event28)
[ 5.964] (II) No input driver specified, ignoring this device.
[ 5.964] (II) This device may have been added with another device file.
[ 5.965] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event4)
[ 5.965] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 5.965] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 5.965] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[ 5.965] (**) Eee PC WMI hotkeys: always reports core events
[ 5.965] (**) Option "Device" "/dev/input/event4"
[ 5.965] (**) Option "_source" "server/udev"
[ 5.966] (II) event4 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 5.967] (II) event4 - Eee PC WMI hotkeys: device is a keyboard
[ 5.967] (II) event4 - Eee PC WMI hotkeys: device removed
[ 6.029] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input7/event4"
[ 6.029] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 19)
[ 6.031] (II) event4 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 6.031] (II) event4 - Eee PC WMI hotkeys: device is a keyboard
[ 6.033] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 6.033] (II) No input driver specified, ignoring this device.
[ 6.033] (II) This device may have been added with another device file.
[ 6.054] (**) E-Signal USB Gaming Mouse Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 6.054] (**) E-Signal USB Gaming Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 6.054] (II) Using input driver 'libinput' for 'E-Signal USB Gaming Mouse Consumer Control'
[ 6.054] (**) E-Signal USB Gaming Mouse Consumer Control: always reports core events
[ 6.054] (**) Option "Device" "/dev/input/event256"
[ 6.054] (**) Option "_source" "_driver/libinput"
[ 6.054] (II) libinput: E-Signal USB Gaming Mouse Consumer Control: is a virtual subdevice
[ 6.054] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:1B80:B40D.0005/input/input36/event256"
[ 6.054] (II) XINPUT: Adding extended input device "E-Signal USB Gaming Mouse Consumer Control" (type: KEYBOARD, id 20)
[ 6.054] (**) USB USB Keykoard Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 6.054] (**) USB USB Keykoard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 6.054] (II) Using input driver 'libinput' for 'USB USB Keykoard Consumer Control'
[ 6.054] (**) USB USB Keykoard Consumer Control: always reports core events
[ 6.054] (**) Option "Device" "/dev/input/event15"
[ 6.054] (**) Option "_source" "_driver/libinput"
[ 6.054] (II) libinput: USB USB Keykoard Consumer Control: is a virtual subdevice
[ 6.054] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:1A2C:0002.0002/input/input18/event15"
[ 6.054] (II) XINPUT: Adding extended input device "USB USB Keykoard Consumer Control" (type: KEYBOARD, id 21)
[ 6.105] (II) config/udev: removing device Video Bus
[ 6.105] (II) event6 - Video Bus: device removed
[ 6.162] (II) UnloadModule: "libinput"
[ 6.163] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 6.163] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 6.163] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 6.163] (II) Using input driver 'libinput' for 'Video Bus'
[ 6.163] (**) Video Bus: always reports core events
[ 6.163] (**) Option "Device" "/dev/input/event6"
[ 6.163] (**) Option "_source" "server/udev"
[ 6.165] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 6.166] (II) event6 - Video Bus: device is a keyboard
[ 6.166] (II) event6 - Video Bus: device removed
[ 6.229] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event6"
[ 6.229] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 6.231] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 6.232] (II) event6 - Video Bus: device is a keyboard
[ 6.233] (II) config/udev: removing device Eee PC WMI hotkeys
[ 6.233] (II) event4 - Eee PC WMI hotkeys: device removed
[ 6.289] (II) UnloadModule: "libinput"
[ 6.290] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event4)
[ 6.290] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 6.290] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 6.290] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[ 6.290] (**) Eee PC WMI hotkeys: always reports core events
[ 6.290] (**) Option "Device" "/dev/input/event4"
[ 6.290] (**) Option "_source" "server/udev"
[ 6.292] (II) event4 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 6.292] (II) event4 - Eee PC WMI hotkeys: device is a keyboard
[ 6.292] (II) event4 - Eee PC WMI hotkeys: device removed
[ 6.376] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input7/event4"
[ 6.376] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 19)
[ 6.377] (II) event4 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 6.377] (II) event4 - Eee PC WMI hotkeys: device is a keyboard
[ 6.378] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card1 /dev/dri/card1
[ 6.378] xf86: remove device 1 /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 6.378] failed to find screen to remove
[ 6.379] (II) config/udev: removing device Microsoft® LifeCam HD-3000: Mi
[ 6.379] (II) event5 - Microsoft® LifeCam HD-3000: Mi: device removed
[ 6.438] (II) UnloadModule: "libinput"
[ 6.438] (II) config/udev: Adding input device Microsoft® LifeCam HD-3000: Mi (/dev/input/event5)
[ 6.438] (**) Microsoft® LifeCam HD-3000: Mi: Applying InputClass "evdev keyboard catchall"
[ 6.438] (**) Microsoft® LifeCam HD-3000: Mi: Applying InputClass "libinput keyboard catchall"
[ 6.438] (II) Using input driver 'libinput' for 'Microsoft® LifeCam HD-3000: Mi'
[ 6.438] (**) Microsoft® LifeCam HD-3000: Mi: always reports core events
[ 6.438] (**) Option "Device" "/dev/input/event5"
[ 6.438] (**) Option "_source" "server/udev"
[ 6.439] (II) event5 - Microsoft® LifeCam HD-3000: Mi: is tagged by udev as: Keyboard
[ 6.439] (II) event5 - Microsoft® LifeCam HD-3000: Mi: device is a keyboard
[ 6.439] (II) event5 - Microsoft® LifeCam HD-3000: Mi: device removed
[ 6.522] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.0/0000:03:00.0/usb3/3-1/3-1:1.0/input/input8/event5"
[ 6.522] (II) XINPUT: Adding extended input device "Microsoft® LifeCam HD-3000: Mi" (type: KEYBOARD, id 18)
[ 6.526] (II) event5 - Microsoft® LifeCam HD-3000: Mi: is tagged by udev as: Keyboard
[ 6.526] (II) event5 - Microsoft® LifeCam HD-3000: Mi: device is a keyboard
[ 6.528] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event9)
[ 6.528] (II) No input driver specified, ignoring this device.
[ 6.528] (II) This device may have been added with another device file.
[ 6.529] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event11)
[ 6.529] (II) No input driver specified, ignoring this device.
[ 6.529] (II) This device may have been added with another device file.
[ 6.530] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event14)
[ 6.530] (II) No input driver specified, ignoring this device.
[ 6.530] (II) This device may have been added with another device file.
[ 6.530] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event10)
[ 6.530] (II) No input driver specified, ignoring this device.
[ 6.530] (II) This device may have been added with another device file.
[ 6.531] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event12)
[ 6.531] (II) No input driver specified, ignoring this device.
[ 6.531] (II) This device may have been added with another device file.
[ 6.532] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event13)
[ 6.532] (II) No input driver specified, ignoring this device.
[ 6.532] (II) This device may have been added with another device file.
[ 6.534] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event26)
[ 6.534] (II) No input driver specified, ignoring this device.
[ 6.534] (II) This device may have been added with another device file.
[ 6.535] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event20)
[ 6.535] (II) No input driver specified, ignoring this device.
[ 6.535] (II) This device may have been added with another device file.
[ 6.536] (II) config/udev: Adding input device Afterglow Gamepad for Xbox 360 (/dev/input/event8)
[ 6.536] (II) No input driver specified, ignoring this device.
[ 6.536] (II) This device may have been added with another device file.
[ 6.537] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event24)
[ 6.537] (II) No input driver specified, ignoring this device.
[ 6.537] (II) This device may have been added with another device file.
[ 6.538] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event25)
[ 6.538] (II) No input driver specified, ignoring this device.
[ 6.538] (II) This device may have been added with another device file.
[ 6.538] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event19)
[ 6.538] (II) No input driver specified, ignoring this device.
[ 6.538] (II) This device may have been added with another device file.
[ 6.539] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event21)
[ 6.539] (II) No input driver specified, ignoring this device.
[ 6.539] (II) This device may have been added with another device file.
[ 6.540] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event23)
[ 6.540] (II) No input driver specified, ignoring this device.
[ 6.540] (II) This device may have been added with another device file.
[ 6.541] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event27)
[ 6.541] (II) No input driver specified, ignoring this device.
[ 6.541] (II) This device may have been added with another device file.
[ 6.542] (II) config/udev: Adding input device Afterglow Gamepad for Xbox 360 (/dev/input/js0)
[ 6.542] (II) No input driver specified, ignoring this device.
[ 6.542] (II) This device may have been added with another device file.
[ 6.543] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event22)
[ 6.543] (II) No input driver specified, ignoring this device.
[ 6.543] (II) This device may have been added with another device file.
[ 6.543] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event18)
[ 6.544] (II) No input driver specified, ignoring this device.
[ 6.544] (II) This device may have been added with another device file.
[ 6.544] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event28)
[ 6.544] (II) No input driver specified, ignoring this device.
[ 6.544] (II) This device may have been added with another device file.
[ 6.547] (II) config/udev: Adding input device E-Signal USB Gaming Mouse (/dev/input/js1)
[ 6.547] (II) No input driver specified, ignoring this device.
[ 6.547] (II) This device may have been added with another device file.
[ 6.548] (II) config/udev: removing device USB USB Keykoard System Control
[ 6.548] (II) event16 - USB USB Keykoard System Control: device removed
[ 6.589] (II) UnloadModule: "libinput"
[ 6.590] (II) config/udev: Adding input device USB USB Keykoard System Control (/dev/input/event16)
[ 6.590] (**) USB USB Keykoard System Control: Applying InputClass "evdev keyboard catchall"
[ 6.590] (**) USB USB Keykoard System Control: Applying InputClass "libinput keyboard catchall"
[ 6.590] (II) Using input driver 'libinput' for 'USB USB Keykoard System Control'
[ 6.590] (**) USB USB Keykoard System Control: always reports core events
[ 6.590] (**) Option "Device" "/dev/input/event16"
[ 6.590] (**) Option "_source" "server/udev"
[ 6.591] (II) event16 - USB USB Keykoard System Control: is tagged by udev as: Keyboard
[ 6.591] (II) event16 - USB USB Keykoard System Control: device is a keyboard
[ 6.592] (II) event16 - USB USB Keykoard System Control: device removed
[ 6.616] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:1A2C:0002.0002/input/input19/event16"
[ 6.616] (II) XINPUT: Adding extended input device "USB USB Keykoard System Control" (type: KEYBOARD, id 17)
[ 6.616] (II) event16 - USB USB Keykoard System Control: is tagged by udev as: Keyboard
[ 6.617] (II) event16 - USB USB Keykoard System Control: device is a keyboard
[ 6.617] (II) config/udev: Adding input device E-Signal USB Gaming Mouse (/dev/input/event257)
[ 6.617] (II) No input driver specified, ignoring this device.
[ 6.617] (II) This device may have been added with another device file.
[ 6.617] (II) config/udev: removing device Blue Microphones Yeti Stereo Microphone Consumer Control
[ 6.617] (II) event17 - Blue Microphones Yeti Stereo Microphone Consumer Control: device removed
[ 6.669] (II) UnloadModule: "libinput"
[ 6.669] (II) config/udev: Adding input device Blue Microphones Yeti Stereo Microphone Consumer Control (/dev/input/event17)
[ 6.669] (**) Blue Microphones Yeti Stereo Microphone Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 6.669] (**) Blue Microphones Yeti Stereo Microphone Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 6.669] (II) Using input driver 'libinput' for 'Blue Microphones Yeti Stereo Microphone Consumer Control'
[ 6.669] (**) Blue Microphones Yeti Stereo Microphone Consumer Control: always reports core events
[ 6.669] (**) Option "Device" "/dev/input/event17"
[ 6.669] (**) Option "_source" "server/udev"
[ 6.670] (II) event17 - Blue Microphones Yeti Stereo Microphone Consumer Control: is tagged by udev as: Keyboard
[ 6.670] (II) event17 - Blue Microphones Yeti Stereo Microphone Consumer Control: device is a keyboard
[ 6.670] (II) event17 - Blue Microphones Yeti Stereo Microphone Consumer Control: device removed
[ 6.736] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.3/0003:B58E:9E84.0003/input/input27/event17"
[ 6.736] (II) XINPUT: Adding extended input device "Blue Microphones Yeti Stereo Microphone Consumer Control" (type: KEYBOARD, id 10)
[ 6.739] (II) event17 - Blue Microphones Yeti Stereo Microphone Consumer Control: is tagged by udev as: Keyboard
[ 6.739] (II) event17 - Blue Microphones Yeti Stereo Microphone Consumer Control: device is a keyboard
[ 6.740] (II) config/udev: removing device E-Signal USB Gaming Mouse Consumer Control
[ 6.741] (II) UnloadModule: "libinput"
[ 6.741] (II) config/udev: removing device E-Signal USB Gaming Mouse Consumer Control
[ 6.741] (II) event256 - E-Signal USB Gaming Mouse Consumer Control: device removed
[ 6.776] (II) UnloadModule: "libinput"
[ 6.777] (II) config/udev: Adding input device E-Signal USB Gaming Mouse Consumer Control (/dev/input/event256)
[ 6.777] (**) E-Signal USB Gaming Mouse Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 6.777] (**) E-Signal USB Gaming Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 6.777] (II) Using input driver 'libinput' for 'E-Signal USB Gaming Mouse Consumer Control'
[ 6.777] (**) E-Signal USB Gaming Mouse Consumer Control: always reports core events
[ 6.777] (**) Option "Device" "/dev/input/event256"
[ 6.777] (**) Option "_source" "server/udev"
[ 6.780] (II) event256 - E-Signal USB Gaming Mouse Consumer Control: is tagged by udev as: Keyboard
[ 6.781] (II) event256 - E-Signal USB Gaming Mouse Consumer Control: device is a keyboard
[ 6.781] (II) event256 - E-Signal USB Gaming Mouse Consumer Control: device removed
[ 6.816] (II) libinput: E-Signal USB Gaming Mouse Consumer Control: needs a virtual subdevice
[ 6.816] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:1B80:B40D.0005/input/input36/event256"
[ 6.816] (II) XINPUT: Adding extended input device "E-Signal USB Gaming Mouse Consumer Control" (type: MOUSE, id 14)
[ 6.816] (**) Option "AccelerationScheme" "none"
[ 6.816] (**) E-Signal USB Gaming Mouse Consumer Control: (accel) selected scheme none/0
[ 6.816] (**) E-Signal USB Gaming Mouse Consumer Control: (accel) acceleration factor: 2.000
[ 6.816] (**) E-Signal USB Gaming Mouse Consumer Control: (accel) acceleration threshold: 4
[ 6.819] (II) event256 - E-Signal USB Gaming Mouse Consumer Control: is tagged by udev as: Keyboard
[ 6.820] (II) event256 - E-Signal USB Gaming Mouse Consumer Control: device is a keyboard
[ 6.820] (**) E-Signal USB Gaming Mouse Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 6.820] (**) E-Signal USB Gaming Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 6.820] (II) Using input driver 'libinput' for 'E-Signal USB Gaming Mouse Consumer Control'
[ 6.820] (**) E-Signal USB Gaming Mouse Consumer Control: always reports core events
[ 6.820] (**) Option "Device" "/dev/input/event256"
[ 6.820] (**) Option "_source" "_driver/libinput"
[ 6.820] (II) libinput: E-Signal USB Gaming Mouse Consumer Control: is a virtual subdevice
[ 6.820] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:1B80:B40D.0005/input/input36/event256"
[ 6.820] (II) XINPUT: Adding extended input device "E-Signal USB Gaming Mouse Consumer Control" (type: KEYBOARD, id 20)
[ 6.821] (II) config/udev: removing device USB USB Keykoard Consumer Control
[ 6.821] (II) UnloadModule: "libinput"
[ 6.821] (II) config/udev: removing device USB USB Keykoard Consumer Control
[ 6.821] (II) event15 - USB USB Keykoard Consumer Control: device removed
[ 6.856] (II) UnloadModule: "libinput"
[ 6.857] (II) config/udev: Adding input device USB USB Keykoard Consumer Control (/dev/input/event15)
[ 6.857] (**) USB USB Keykoard Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 6.857] (**) USB USB Keykoard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 6.857] (II) Using input driver 'libinput' for 'USB USB Keykoard Consumer Control'
[ 6.857] (**) USB USB Keykoard Consumer Control: always reports core events
[ 6.857] (**) Option "Device" "/dev/input/event15"
[ 6.857] (**) Option "_source" "server/udev"
[ 6.860] (II) event15 - USB USB Keykoard Consumer Control: is tagged by udev as: Keyboard
[ 6.861] (II) event15 - USB USB Keykoard Consumer Control: device is a keyboard
[ 6.861] (II) event15 - USB USB Keykoard Consumer Control: device removed
[ 6.896] (II) libinput: USB USB Keykoard Consumer Control: needs a virtual subdevice
[ 6.896] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:1A2C:0002.0002/input/input18/event15"
[ 6.896] (II) XINPUT: Adding extended input device "USB USB Keykoard Consumer Control" (type: MOUSE, id 16)
[ 6.896] (**) Option "AccelerationScheme" "none"
[ 6.896] (**) USB USB Keykoard Consumer Control: (accel) selected scheme none/0
[ 6.896] (**) USB USB Keykoard Consumer Control: (accel) acceleration factor: 2.000
[ 6.896] (**) USB USB Keykoard Consumer Control: (accel) acceleration threshold: 4
[ 6.899] (II) event15 - USB USB Keykoard Consumer Control: is tagged by udev as: Keyboard
[ 6.899] (II) event15 - USB USB Keykoard Consumer Control: device is a keyboard
[ 6.900] (**) USB USB Keykoard Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 6.900] (**) USB USB Keykoard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 6.900] (II) Using input driver 'libinput' for 'USB USB Keykoard Consumer Control'
[ 6.900] (**) USB USB Keykoard Consumer Control: always reports core events
[ 6.900] (**) Option "Device" "/dev/input/event15"
[ 6.900] (**) Option "_source" "_driver/libinput"
[ 6.900] (II) libinput: USB USB Keykoard Consumer Control: is a virtual subdevice
[ 6.900] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:1A2C:0002.0002/input/input18/event15"
[ 6.900] (II) XINPUT: Adding extended input device "USB USB Keykoard Consumer Control" (type: KEYBOARD, id 21)
[ 6.901] (II) config/udev: removing device E-Signal USB Gaming Mouse Keyboard
[ 6.901] (II) event30 - E-Signal USB Gaming Mouse Keyboard: device removed
[ 6.922] (II) UnloadModule: "libinput"
[ 6.924] (II) config/udev: Adding input device E-Signal USB Gaming Mouse Keyboard (/dev/input/event30)
[ 6.924] (**) E-Signal USB Gaming Mouse Keyboard: Applying InputClass "evdev keyboard catchall"
[ 6.924] (**) E-Signal USB Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[ 6.924] (II) Using input driver 'libinput' for 'E-Signal USB Gaming Mouse Keyboard'
[ 6.924] (**) E-Signal USB Gaming Mouse Keyboard: always reports core events
[ 6.924] (**) Option "Device" "/dev/input/event30"
[ 6.924] (**) Option "_source" "server/udev"
[ 6.927] (II) event30 - E-Signal USB Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[ 6.927] (II) event30 - E-Signal USB Gaming Mouse Keyboard: device is a keyboard
[ 6.928] (II) event30 - E-Signal USB Gaming Mouse Keyboard: device removed
[ 6.949] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:1B80:B40D.0005/input/input34/event30"
[ 6.949] (II) XINPUT: Adding extended input device "E-Signal USB Gaming Mouse Keyboard" (type: KEYBOARD, id 12)
[ 6.953] (II) event30 - E-Signal USB Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[ 6.953] (II) event30 - E-Signal USB Gaming Mouse Keyboard: device is a keyboard
[ 6.954] (II) config/udev: removing device USB USB Keykoard
[ 6.954] (II) event7 - USB USB Keykoard: device removed
[ 6.989] (II) UnloadModule: "libinput"
[ 6.990] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event7)
[ 6.990] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 6.990] (**) USB USB Keykoard: Applying InputClass "libinput keyboard catchall"
[ 6.990] (II) Using input driver 'libinput' for 'USB USB Keykoard'
[ 6.990] (**) USB USB Keykoard: always reports core events
[ 6.991] (**) Option "Device" "/dev/input/event7"
[ 6.991] (**) Option "_source" "server/udev"
[ 6.994] (II) event7 - USB USB Keykoard: is tagged by udev as: Keyboard
[ 6.994] (II) event7 - USB USB Keykoard: device is a keyboard
[ 6.994] (II) event7 - USB USB Keykoard: device removed
[ 7.029] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:1A2C:0002.0001/input/input10/event7"
[ 7.029] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 15)
[ 7.032] (II) event7 - USB USB Keykoard: is tagged by udev as: Keyboard
[ 7.033] (II) event7 - USB USB Keykoard: device is a keyboard
[ 7.034] (II) config/udev: removing device E-Signal USB Gaming Mouse System Control
[ 7.034] (II) event31 - E-Signal USB Gaming Mouse System Control: device removed
[ 7.069] (II) UnloadModule: "libinput"
[ 7.070] (II) config/udev: Adding input device E-Signal USB Gaming Mouse System Control (/dev/input/event31)
[ 7.070] (**) E-Signal USB Gaming Mouse System Control: Applying InputClass "evdev keyboard catchall"
[ 7.070] (**) E-Signal USB Gaming Mouse System Control: Applying InputClass "libinput keyboard catchall"
[ 7.070] (II) Using input driver 'libinput' for 'E-Signal USB Gaming Mouse System Control'
[ 7.070] (**) E-Signal USB Gaming Mouse System Control: always reports core events
[ 7.070] (**) Option "Device" "/dev/input/event31"
[ 7.070] (**) Option "_source" "server/udev"
[ 7.074] (II) event31 - E-Signal USB Gaming Mouse System Control: is tagged by udev as: Keyboard
[ 7.074] (II) event31 - E-Signal USB Gaming Mouse System Control: device is a keyboard
[ 7.074] (II) event31 - E-Signal USB Gaming Mouse System Control: device removed
[ 7.109] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:1B80:B40D.0005/input/input35/event31"
[ 7.109] (II) XINPUT: Adding extended input device "E-Signal USB Gaming Mouse System Control" (type: KEYBOARD, id 13)
[ 7.113] (II) event31 - E-Signal USB Gaming Mouse System Control: is tagged by udev as: Keyboard
[ 7.113] (II) event31 - E-Signal USB Gaming Mouse System Control: device is a keyboard
[ 7.114] (II) config/udev: removing device E-Signal USB Gaming Mouse
[ 7.114] (II) event29 - E-Signal USB Gaming Mouse: device removed
[ 7.189] (II) UnloadModule: "libinput"
[ 7.190] (II) config/udev: Adding input device E-Signal USB Gaming Mouse (/dev/input/event29)
[ 7.190] (**) E-Signal USB Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 7.190] (**) E-Signal USB Gaming Mouse: Applying InputClass "libinput pointer catchall"
[ 7.190] (II) Using input driver 'libinput' for 'E-Signal USB Gaming Mouse'
[ 7.190] (**) E-Signal USB Gaming Mouse: always reports core events
[ 7.190] (**) Option "Device" "/dev/input/event29"
[ 7.190] (**) Option "_source" "server/udev"
[ 7.248] (II) event29 - E-Signal USB Gaming Mouse: is tagged by udev as: Mouse
[ 7.249] (II) event29 - E-Signal USB Gaming Mouse: device is a pointer
[ 7.249] (II) event29 - E-Signal USB Gaming Mouse: device removed
[ 7.309] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:1B80:B40D.0004/input/input33/event29"
[ 7.309] (II) XINPUT: Adding extended input device "E-Signal USB Gaming Mouse" (type: MOUSE, id 11)
[ 7.309] (**) Option "AccelerationScheme" "none"
[ 7.309] (**) E-Signal USB Gaming Mouse: (accel) selected scheme none/0
[ 7.309] (**) E-Signal USB Gaming Mouse: (accel) acceleration factor: 2.000
[ 7.309] (**) E-Signal USB Gaming Mouse: (accel) acceleration threshold: 4
[ 7.368] (II) event29 - E-Signal USB Gaming Mouse: is tagged by udev as: Mouse
[ 7.369] (II) event29 - E-Signal USB Gaming Mouse: device is a pointer
[ 7.371] (II) config/udev: Adding input device E-Signal USB Gaming Mouse (/dev/input/mouse0)
[ 7.371] (II) No input driver specified, ignoring this device.
[ 7.371] (II) This device may have been added with another device file.
[ 1303.848] (EE) event7 - USB USB Keykoard: client bug: event processing lagging behind by 15ms, your system is too slow
[ 1306.306] (II) modeset(0): EDID vendor "DEL", prod id 40980
[ 1306.306] (II) modeset(0): Using EDID range info for horizontal sync
[ 1306.306] (II) modeset(0): Using EDID range info for vertical refresh
[ 1306.306] (II) modeset(0): Printing DDC gathered Modelines:
[ 1306.306] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 1306.306] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1306.306] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1306.306] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1306.306] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1306.306] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1306.306] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 1306.306] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1306.307] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1306.307] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1306.349] (II) modeset(0): EDID vendor "DEL", prod id 40980
[ 1306.349] (II) modeset(0): Using hsync ranges from config file
[ 1306.349] (II) modeset(0): Using vrefresh ranges from config file
[ 1306.349] (II) modeset(0): Printing DDC gathered Modelines:
[ 1306.350] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 1306.350] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1306.350] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1306.350] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1306.350] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1306.350] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1306.350] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 1306.350] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1306.350] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1306.350] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1553.551] (EE) event7 - USB USB Keykoard: client bug: event processing lagging behind by 22ms, your system is too slowlspci -k
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
Subsystem: ASUSTeK Computer Inc. Device 8694
Kernel driver in use: skl_uncore
00:01.0 PCI bridge: Intel Corporation 6th-9th Gen Core Processor PCIe Controller (x16) (rev 07)
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)
DeviceName: Onboard IGD
Subsystem: ASUSTeK Computer Inc. Device 8694
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31)
Subsystem: ASUSTeK Computer Inc. Device 8694
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)
Subsystem: ASUSTeK Computer Inc. Device 8694
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller: Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] (rev 31)
Subsystem: ASUSTeK Computer Inc. Device 8694
Kernel driver in use: ahci
00:1b.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #17 (rev f1)
Kernel driver in use: pcieport
00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 (rev f1)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #3 (rev f1)
Kernel driver in use: pcieport
00:1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 (rev f1)
Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation Z170 Chipset LPC/eSPI Controller (rev 31)
Subsystem: ASUSTeK Computer Inc. Device 8694
00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)
Subsystem: ASUSTeK Computer Inc. Device 8694
00:1f.3 Audio device: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller (rev 31)
Subsystem: ASUSTeK Computer Inc. Device 86ae
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)
Subsystem: ASUSTeK Computer Inc. Device 8694
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V (rev 31)
Subsystem: ASUSTeK Computer Inc. Device 8672
Kernel driver in use: e1000e
Kernel modules: e1000e
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii XT / Grenada XT [Radeon R9 290X/390X] (rev 80)
Subsystem: XFX Pine Group Inc. Grenada XT [Radeon R9 390X]
Kernel driver in use: radeon
Kernel modules: radeon, amdgpu
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X]
Subsystem: XFX Pine Group Inc. Device aac8
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
03:00.0 USB controller: ASMedia Technology Inc. ASM1142 USB 3.1 Host Controller
Subsystem: ASUSTeK Computer Inc. Device 8675
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
04:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a)
Subsystem: Intel Corporation Dual Band Wireless-AC 8260
Kernel driver in use: iwlwifi
Kernel modules: iwlwifisudo pacman -Qs amd
local/amdvlk 2021.Q1.3-1
AMD's standalone Vulkan driver
local/lib32-amdvlk 2021.Q1.3-1
AMD's standalone Vulkan driver
local/xf86-video-amdgpu 19.1.0-2 (xorg-drivers)
X.org amdgpu video driversudo pacman -Qs xf86
local/lib32-libxxf86vm 1.1.4-2
X11 XFree86 video mode extension library (32-bit)
local/libxxf86vm 1.1.4-4
X11 XFree86 video mode extension library
local/xf86-input-evdev 2.10.6-2 (xorg-drivers)
X.org evdev input driver
local/xf86-input-libinput 0.30.0-1 (xorg-drivers)
Generic input driver for the X.Org server based on libinput
local/xf86-input-synaptics 1.9.1-2 (xorg-drivers)
Synaptics driver for notebook touchpads
local/xf86-input-vmmouse 13.1.0-5 (xorg-drivers)
X.org VMWare Mouse input driver
local/xf86-input-void 1.4.1-5 (xorg-drivers)
X.org void input driver
local/xf86-video-amdgpu 19.1.0-2 (xorg-drivers)
X.org amdgpu video driverglxinfo -B
name of display: :0
display: :0 screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
Vendor: Intel (0x8086)
Device: Mesa Intel(R) HD Graphics 530 (SKL GT2) (0x1912)
Version: 20.3.4
Accelerated: yes
Video memory: 3072MB
Unified memory: yes
Preferred profile: core (0x1)
Max core profile version: 4.6
Max compat profile version: 4.6
Max GLES1 profile version: 1.1
Max GLES[23] profile version: 3.2
OpenGL vendor string: Intel
OpenGL renderer string: Mesa Intel(R) HD Graphics 530 (SKL GT2)
OpenGL core profile version string: 4.6 (Core Profile) Mesa 20.3.4
OpenGL core profile shading language version string: 4.60
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL version string: 4.6 (Compatibility Profile) Mesa 20.3.4
OpenGL shading language version string: 4.60
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile
OpenGL ES profile version string: OpenGL ES 3.2 Mesa 20.3.4
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20Offline
#2 2021-02-25 06:59:29
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,029
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
https://wiki.archlinux.org/index.php/PR … erse_PRIME
i commented about everything out of my .xinitrc, and found the culprit
Please post the xinitrc.
Offline
#3 2021-02-25 15:36:09
- Jonny_312
- Member
- Registered: 2021-02-25
- Posts: 9
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
seth wrote:
https://wiki.archlinux.org/index.php/PR … erse_PRIME
Please post the xinitrc.
I don't think this is particularly useful as the only thing which runs in it now is exec xmonad.
But since you want to see it.
# dual monitor
#xrandr --output DVI-D-1-2 --primary --left-of DP-3 --auto
#xrandr --output DP-3 --right-of DVI-D-1-2
#xrandr --output DP-3 --off
#xrandr --output DVI-D-1-2 --auto --primary
#
xtheme ayu &
picom &
# WM
exec xmonad
#exec herbstluftwm --lockedxtheme just runs xrdb and applies some theming, this appears to have no effect on the situation, as well as picom appearing to have no effect on the situation.
Again the issue happens when i run the command "xrandr --output DVI-DV-1-2" with any setup. The problem seems to be specific to outputting to this particular monitor, or related to the GPU it is plugged into.
Offline
#4 2021-02-25 15:38:48
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,029
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
That's actually very useful because
a) you need to redirect the output, see link in #2
b) your xinitrc is broken, see the link in my signature :-P
Offline
#5 2021-02-25 16:32:19
- Jonny_312
- Member
- Registered: 2021-02-25
- Posts: 9
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
I'm gonna look into getting the redirect working.
However I'm still not sure why you think my xinitrc is broken. It's always worked for me, and your link to prove that its broken is what I used to figure out what I need in it, and how to set it up. Could you explain what specifically is broken about it? My guess would be that It doesn't follow the generic template. But It's a config file, and I'm fairly certain the template is a guide not a requirement. My other guess would be having 2 exec commands, but I always have one of them commented out, and Im aware that commands after an exec command don't get run.
Offline
#6 2021-02-25 16:34:18
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,029
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
the wiki[ wrote:
Note: At the very least, ensure that the last if block in /etc/X11/xinit/xinitrc is present in your ~/.xinitrc file to ensure that the scripts in /etc/X11/xinit/xinitrc.d are sourced.
Edit: this is required in order to get an active session from the systemd POV which will in turn be required to access/mount several devices, reboot etc. w/o requiring you to be root.
Last edited by seth (2021-02-25 16:35:51)
Offline
#7 2021-02-26 02:27:35
- Jonny_312
- Member
- Registered: 2021-02-25
- Posts: 9
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
seth wrote:
a) you need to redirect the output, see link in #2
I tried to do this by following the directions but substitting my own system options in, and it complained about using amd. then I read the page a bit more and it says specifically that this doesn't work with AMD GPUS, which I have. So I don't believe this solution is going to work for my system, If it is I dont have the know-how or resources available to make it work.
Offline
#8 2021-02-26 07:20:40
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,029
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
It's not supported by AMD + NVIDIA, but you've AMD and an intel chip.
Please post the output of
xrandr --listprovidersOffline
#9 2021-02-26 17:52:19
- Jonny_312
- Member
- Registered: 2021-02-25
- Posts: 9
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
Unfortunately I cannot, and I think this is the end of the thread.
In attempting to work out a solution I broke my entire computer, appears to have ruined the motherboard.
I was attempting to figure out for certain if it was a hardware issue with the monitor or a GPU issue as I was still uncertain. SO i plugged in another monitor from a friend into the motherboard slot, and it worked fine. I plugged it in to the GPU, xrandr didn't see it. So i rebooted, it saw it so i was about to try to use xrandr to output to it, and Xorg appeared to crash but before i entered the command it crashed when I tried to tab-complete the name of the port this new monitor was plugged in. I tried to reboot. and it didn't. It hasn't turned back on since. It makes noises, so at least is turning on and off the fans, when i turn the computer off and on. But i never see anything on any monitor, we tried with basically every configuration possible, No Motherboard logo, no boot menu, no grub. There is now NO output at all from my machine.
I think I need a new motherboard now, and maybe a new GPU too.
Offline
#10 2021-02-26 19:29:01
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,029
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
It's not likely that you damaged the HW by the described actions (unless you opened the case and fumbled around w/ the HW)
From the context, remove the GPU, see whether you get output on the IGP, if yes, try to re-seat the GPU.
Offline
#11 2021-02-26 20:52:39
- Jonny_312
- Member
- Registered: 2021-02-25
- Posts: 9
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
thats a good idea, Im gonna contact my IT friend who's more accustomed to dealing with hardware, as I'm much more comfortable tinkering with software, but don't trust myself yet to mess with hardware issues alone.
Offline
#12 2021-02-27 03:25:55
- Jonny_312
- Member
- Registered: 2021-02-25
- Posts: 9
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
We tried to remove the GPU, and no output from the motherboard alone. We then followed someone else's suggestion of trying to reset the motherboard, which also did nothing. Kinda back to square 0.
Offline
#13 2021-02-27 07:36:11
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,029
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
rule #1: cable.
Does the BIOS present you w/ a re-assuring "beep" when powered up?
Offline
#14 2021-02-27 11:33:07
- DrWolfy
- Member
- Registered: 2021-02-27
- Posts: 2
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
I'm having the same problem on the same version. Using a integrated radeon card with a external amd gpu card.
The problem only started happening after upgrading to the latest kernel version.
If I unplug the monitor using the external card, and reboot my computer, it uses the monitor with the integrated card without a problem. But when I plug in the other monitor and try to enable it with xrandr, it crashes.
Offline
#15 2021-02-27 11:55:12
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,029
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
attempts to send video output to this monitor cause what appears to be an Xorg crash, as The screen goes black except for the mouse, and my mouse and keyboard become unresponsive.
Same pattern?
Let's assume a bug in amdgpu, pass
amdgpu.dc=0 amdgpu.audio=0 amdgpu.dpm=0 amdgpu.aspm=0 amdgpu.runpm=0 amdgpu.bapm=0 to the kernel command line and see whether you can reproduce the issue.
Also run "dmesg -w" while you're adding/enabling the output (make sure to not use a compositor as further indirection, ideally ssh into the system) and see whether you get some kernel errors.
Ftr. "upgrading to the latest kernel version" from which? In particular is this the lts kernel and you went from 5.,4.xx to 5.10 or 5.11?
Offline
#16 2021-02-27 15:11:53
- DrWolfy
- Member
- Registered: 2021-02-27
- Posts: 2
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
I don't remember which anymore since it was 2 days ago and I have reinstalled everything due to an unrelated issue. But right now I downgraded to 5.10.11-arch1-1 and it is working fine without any problems.
Offline
#17 2021-02-27 15:14:08
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,029
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
Check your pacman log?
Offline
#18 2021-02-27 18:44:35
- Jonny_312
- Member
- Registered: 2021-02-25
- Posts: 9
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
seth wrote:
rule #1: cable.
Does the BIOS present you w/ a re-assuring "beep" when powered up?
No. The only thing that happens on power up is the start up of the fans, and the LEDs in my case flash.
Offline
#19 2021-02-27 19:50:27
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,029
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
Consult the board manual, the flashing encodes a message.
Did you try to replace the monitor cable(s)?
Offline
#20 2021-02-28 08:08:04
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,029
Re: linux-5.11.1-arch1.1 has caused my Xorg to Crash from second monitor
Possibly on the original problem: https://bugzilla.kernel.org/show_bug.cgi?id=210303
Edit, also https://gitlab.freedesktop.org/drm/amd/-/issues/1495 and https://bbs.archlinux.org/viewtopic.php … 7#p1959167
Last edited by seth (2021-02-28 19:25:39)
Offline