A stop job running for user manager uid 1000 while using WM and not DE

arch181 · 2021-03-04 12:06:45

I started having this problem yesterday, every time I reboot I get 'A stop job running for user manager uid 1000' delay while using i3 window manager and not DE as i found lots of solutions if I was using DE. I also found some kind of solution for me by reducing the time for the delay in the user.service unit, but is that even ok ?? Is there any other solutions ?? I also discovered that I get this delay even if I end the x session and reboot from the (tty1) of my user, but when I login to the root user which doesnt have any session on it just the (tty1) and reboot from there I dont get this delay. Any ideas ??
Here is the journal from the last reboot:

Mar 04 12:41:42 arch181 systemd-logind[360]: System is rebooting.
Mar 04 12:41:42 arch181 kernel: audit: type=1104 audit(1614854502.906:80): pid=374 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faill>
Mar 04 12:41:42 arch181 kernel: audit: type=1106 audit(1614854502.910:81): pid=374 uid=0 auid=1000 ses=1 msg='op=PAM:session_close grantors=? acct="yan" exe="/usr/bin/l>
Mar 04 12:41:42 arch181 audit[374]: CRED_DISP pid=374 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock a>
Mar 04 12:41:42 arch181 audit[374]: USER_END pid=374 uid=0 auid=1000 ses=1 msg='op=PAM:session_close grantors=? acct="yan" exe="/usr/bin/login" hostname=arch181 addr=? >
Mar 04 12:41:42 arch181 login[374]: pam_unix(login:session): session closed for user yan
Mar 04 12:41:42 arch181 at-spi-bus-launcher[775]: X connection to :0 broken (explicit kill or server shutdown).
Mar 04 12:41:42 arch181 freshclam[464]: Update process terminated
Mar 04 12:41:42 arch181 systemd[1]: Stopping Session 1 of user yan.
Mar 04 12:41:42 arch181 bluetoothd[395]: Terminating
Mar 04 12:41:42 arch181 systemd[1]: Removed slice system-modprobe.slice.
Mar 04 12:41:42 arch181 bluetoothd[395]: Endpoint unregistered: sender=:1.23 path=/MediaEndpoint/A2DPSink/sbc
Mar 04 12:41:42 arch181 systemd[1]: Stopped target Bluetooth.
Mar 04 12:41:42 arch181 bluetoothd[395]: Endpoint unregistered: sender=:1.23 path=/MediaEndpoint/A2DPSource/sbc
Mar 04 12:41:42 arch181 systemd[1]: Stopped target Graphical Interface.
Mar 04 12:41:42 arch181 login[374]: pam_systemd(login:session): Failed to release session: Interrupted system call
Mar 04 12:41:42 arch181 systemd[1]: Stopped target Multi-User System.
Mar 04 12:41:42 arch181 systemd[1]: Stopped target Login Prompts.
Mar 04 12:41:42 arch181 systemd[1]: Stopped target Sound Card.
Mar 04 12:41:42 arch181 systemd[1]: Stopped target Timers.
Mar 04 12:41:42 arch181 systemd[1]: man-db.timer: Succeeded.
Mar 04 12:41:42 arch181 systemd[1]: Stopped Daily man-db regeneration.
Mar 04 12:41:42 arch181 systemd[1]: paccache.timer: Succeeded.
Mar 04 12:41:42 arch181 systemd[1]: Stopped Discard unused packages weekly.
Mar 04 12:41:42 arch181 systemd[1]: shadow.timer: Succeeded.
Mar 04 12:41:42 arch181 systemd[1]: Stopped Daily verification of password and group files.
Mar 04 12:41:42 arch181 systemd[1]: systemd-tmpfiles-clean.timer: Succeeded.
Mar 04 12:41:42 arch181 systemd[1]: Stopped Daily Cleanup of Temporary Directories.
Mar 04 12:41:42 arch181 systemd[1]: lvm2-lvmpolld.socket: Succeeded.
Mar 04 12:41:42 arch181 systemd[1]: Closed LVM2 poll daemon socket.
Mar 04 12:41:42 arch181 systemd[1]: systemd-rfkill.socket: Succeeded.
Mar 04 12:41:42 arch181 systemd[1]: Closed Load/Save RF Kill Switch Status /dev/rfkill Watch.
Mar 04 12:41:42 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? >
Mar 04 12:41:42 arch181 systemd[1]: Stopping Bluetooth service...
Mar 04 12:41:42 arch181 systemd[1]: Stopping ClamAV virus database updater...
Mar 04 12:41:42 arch181 systemd[1]: Stopping Getty on tty1...
Mar 04 12:41:42 arch181 systemd[1]: Starting Generate shutdown-ramfs...
Mar 04 12:41:42 arch181 systemd[1]: Stopping Authorization Manager...
Mar 04 12:41:42 arch181 systemd[1]: Stopping RealtimeKit Scheduling Policy Service...
Mar 04 12:41:42 arch181 systemd[1]: Stopping Load/Save Random Seed...
Mar 04 12:41:42 arch181 systemd[1]: getty@tty1.service: Succeeded.
Mar 04 12:41:42 arch181 systemd[1]: Stopped Getty on tty1.
Mar 04 12:41:42 arch181 kernel: audit: type=1131 audit(1614854502.920:82): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/>
Mar 04 12:41:42 arch181 bluetoothd[395]: Stopping SDP server
Mar 04 12:41:42 arch181 bluetoothd[395]: Exit
Mar 04 12:41:42 arch181 mkinitcpio[1547]: ==> Starting build: none
Mar 04 12:41:42 arch181 mkinitcpio[1547]:   -> Running build hook: [sd-shutdown]
Mar 04 12:41:42 arch181 systemd[1]: bluetooth.service: Succeeded.
Mar 04 12:41:42 arch181 systemd[1]: Stopped Bluetooth service.
Mar 04 12:41:42 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? a>
Mar 04 12:41:42 arch181 systemd[1]: clamav-freshclam.service: Succeeded.
Mar 04 12:41:42 arch181 systemd[1]: Stopped ClamAV virus database updater.
Mar 04 12:41:42 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=clamav-freshclam comm="systemd" exe="/usr/lib/systemd/systemd" hostn>
Mar 04 12:41:42 arch181 kernel: audit: type=1131 audit(1614854502.960:83): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/usr/lib/s>
Mar 04 12:41:42 arch181 kernel: audit: type=1131 audit(1614854502.960:84): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=clamav-freshclam comm="systemd" exe="/us>
Mar 04 12:41:42 arch181 systemd[1]: rtkit-daemon.service: Succeeded.
Mar 04 12:41:42 arch181 systemd[1]: Stopped RealtimeKit Scheduling Policy Service.
Mar 04 12:41:42 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=>
Mar 04 12:41:42 arch181 systemd[1]: polkit.service: Succeeded.
Mar 04 12:41:42 arch181 systemd[1]: Stopped Authorization Manager.
Mar 04 12:41:42 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr>
Mar 04 12:41:42 arch181 systemd[1]: systemd-random-seed.service: Succeeded.
Mar 04 12:41:42 arch181 systemd[1]: Stopped Load/Save Random Seed.
Mar 04 12:41:42 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" ho>
Mar 04 12:41:42 arch181 kernel: audit: type=1131 audit(1614854502.963:85): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/li>
Mar 04 12:41:42 arch181 kernel: audit: type=1131 audit(1614854502.963:86): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/syst>
Mar 04 12:41:42 arch181 kernel: audit: type=1131 audit(1614854502.963:87): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe=">
Mar 04 12:41:42 arch181 systemd-logind[360]: Session 1 logged out. Waiting for processes to exit.
Mar 04 12:41:42 arch181 systemd[1]: Removed slice system-getty.slice.
Mar 04 12:41:42 arch181 systemd[1]: Stopped target Network is Online.
Mar 04 12:41:42 arch181 systemd[1]: NetworkManager-wait-online.service: Succeeded.
Mar 04 12:41:42 arch181 systemd[1]: Stopped Network Manager Wait Online.
Mar 04 12:41:42 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd" exe="/usr/lib/systemd/syst>
Mar 04 12:41:42 arch181 kernel: audit: type=1131 audit(1614854502.966:88): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd>
Mar 04 12:41:42 arch181 systemd[466]: pulseaudio.service: Succeeded.
Mar 04 12:41:43 arch181 mkinitcpio[1547]: ==> Build complete.
Mar 04 12:41:43 arch181 systemd[1]: mkinitcpio-generate-shutdown-ramfs.service: Succeeded.
Mar 04 12:41:43 arch181 systemd[1]: Finished Generate shutdown-ramfs.
Mar 04 12:41:43 arch181 audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=mkinitcpio-generate-shutdown-ramfs comm="systemd" exe="/usr/lib/sys>
Mar 04 12:41:43 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=mkinitcpio-generate-shutdown-ramfs comm="systemd" exe="/usr/lib/syst>
Mar 04 12:41:43 arch181 kernel: audit: type=1130 audit(1614854503.033:89): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=mkinitcpio-generate-shutdown-ramfs comm=>
Mar 04 12:41:43 arch181 systemd[1]: session-1.scope: Succeeded.
Mar 04 12:41:43 arch181 systemd[1]: Stopped Session 1 of user yan.
Mar 04 12:41:43 arch181 systemd[1]: Stopping User Login Management...
Mar 04 12:41:43 arch181 systemd[1]: Stopping User Manager for UID 1000...
Mar 04 12:41:43 arch181 systemd[466]: Stopped target Main User Target.
Mar 04 12:41:43 arch181 systemd-logind[360]: Removed session 1.
Mar 04 12:41:43 arch181 systemd[466]: Stopping Accessibility services bus...
Mar 04 12:41:43 arch181 gvfsd[685]: A connection to the bus can't be made
Mar 04 12:41:43 arch181 systemd[466]: Stopping D-Bus User Message Bus...
Mar 04 12:41:43 arch181 systemd[466]: Stopping Virtual filesystem service...
Mar 04 12:41:43 arch181 systemd[466]: dbus.service: Succeeded.
Mar 04 12:41:43 arch181 systemd[466]: Stopped D-Bus User Message Bus.
Mar 04 12:41:43 arch181 systemd[466]: run-user-1000-gvfs.mount: Succeeded.
Mar 04 12:41:43 arch181 systemd[1]: run-user-1000-gvfs.mount: Succeeded.
Mar 04 12:41:43 arch181 systemd[466]: gvfs-daemon.service: Succeeded.
Mar 04 12:41:43 arch181 systemd[466]: Stopped Virtual filesystem service.
Mar 04 12:41:43 arch181 systemd[1]: Unmounted /run/user/1000/gvfs.
Mar 04 12:41:44 arch181 systemd[1]: systemd-logind.service: Succeeded.
Mar 04 12:41:44 arch181 systemd[1]: Stopped User Login Management.
Mar 04 12:41:44 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostnam>
Mar 04 12:41:44 arch181 audit: BPF prog-id=14 op=UNLOAD
Mar 04 12:41:44 arch181 audit: BPF prog-id=13 op=UNLOAD
Mar 04 12:43:14 arch181 systemd[466]: at-spi-dbus-bus.service: State 'stop-sigterm' timed out. Killing.
Mar 04 12:43:14 arch181 systemd[466]: at-spi-dbus-bus.service: Killing process 755 (at-spi-bus-laun) with signal SIGKILL.
Mar 04 12:43:14 arch181 systemd[466]: at-spi-dbus-bus.service: Killing process 758 (gmain) with signal SIGKILL.
Mar 04 12:43:14 arch181 systemd[466]: at-spi-dbus-bus.service: Main process exited, code=killed, status=9/KILL
Mar 04 12:43:14 arch181 systemd[466]: at-spi-dbus-bus.service: Failed with result 'timeout'.
Mar 04 12:43:14 arch181 systemd[466]: Stopped Accessibility services bus.
Mar 04 12:43:14 arch181 systemd[466]: Stopped target Basic System.
Mar 04 12:43:14 arch181 systemd[466]: Stopped target Paths.
Mar 04 12:43:14 arch181 systemd[466]: Stopped target Sockets.
Mar 04 12:43:14 arch181 systemd[466]: Stopped target Timers.
Mar 04 12:43:14 arch181 systemd[466]: dbus.socket: Succeeded.
Mar 04 12:43:14 arch181 systemd[466]: Closed D-Bus User Message Bus Socket.
Mar 04 12:43:14 arch181 systemd[466]: dirmngr.socket: Succeeded.
Mar 04 12:43:14 arch181 systemd[466]: Closed GnuPG network certificate management daemon.
Mar 04 12:43:14 arch181 systemd[466]: gpg-agent-browser.socket: Succeeded.
Mar 04 12:43:14 arch181 systemd[466]: Closed GnuPG cryptographic agent and passphrase cache (access for web browsers).
Mar 04 12:43:14 arch181 systemd[466]: gpg-agent-extra.socket: Succeeded.
Mar 04 12:43:14 arch181 systemd[466]: Closed GnuPG cryptographic agent and passphrase cache (restricted).
Mar 04 12:43:14 arch181 systemd[466]: gpg-agent-ssh.socket: Succeeded.
Mar 04 12:43:14 arch181 systemd[466]: Closed GnuPG cryptographic agent (ssh-agent emulation).
Mar 04 12:43:14 arch181 systemd[466]: gpg-agent.socket: Succeeded.
Mar 04 12:43:14 arch181 systemd[466]: Closed GnuPG cryptographic agent and passphrase cache.
Mar 04 12:43:14 arch181 systemd[466]: p11-kit-server.socket: Succeeded.
Mar 04 12:43:14 arch181 systemd[466]: Closed p11-kit server.
Mar 04 12:43:14 arch181 systemd[466]: pulseaudio.socket: Succeeded.
Mar 04 12:43:14 arch181 systemd[466]: Closed Sound System.
Mar 04 12:43:14 arch181 systemd[466]: Removed slice User Application Slice.
Mar 04 12:43:14 arch181 systemd[466]: Reached target Shutdown.
Mar 04 12:43:14 arch181 systemd[466]: systemd-exit.service: Succeeded.
Mar 04 12:43:14 arch181 systemd[466]: Finished Exit the Session.
Mar 04 12:43:14 arch181 systemd[466]: Reached target Exit the Session.
Mar 04 12:43:14 arch181 systemd[467]: pam_warn(systemd-user:setcred): function=[pam_sm_setcred] flags=0x8004 service=[systemd-user] terminal=[] user=[yan] ruser=[<unkno>
Mar 04 12:43:14 arch181 systemd[1]: user@1000.service: Succeeded.
Mar 04 12:43:14 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? a>
Mar 04 12:43:14 arch181 systemd[1]: Stopped User Manager for UID 1000.
Mar 04 12:43:14 arch181 systemd[1]: Stopping User Runtime Directory /run/user/1000...
Mar 04 12:43:14 arch181 kernel: kauditd_printk_skb: 4 callbacks suppressed
Mar 04 12:43:14 arch181 kernel: audit: type=1131 audit(1614854594.026:94): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/s>
Mar 04 12:43:14 arch181 systemd[1]: run-user-1000.mount: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Unmounted /run/user/1000.
Mar 04 12:43:14 arch181 systemd[1]: user-runtime-dir@1000.service: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Stopped User Runtime Directory /run/user/1000.
Mar 04 12:43:14 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" >
Mar 04 12:43:14 arch181 kernel: audit: type=1131 audit(1614854594.036:95): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe>
Mar 04 12:43:14 arch181 systemd[1]: Removed slice User Slice of UID 1000.
Mar 04 12:43:14 arch181 systemd[1]: Stopping Permit User Sessions...
Mar 04 12:43:14 arch181 systemd[1]: systemd-user-sessions.service: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Stopped Permit User Sessions.
Mar 04 12:43:14 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" >
Mar 04 12:43:14 arch181 systemd[1]: Stopped target Network.
Mar 04 12:43:14 arch181 systemd[1]: Stopped target Remote File Systems.
Mar 04 12:43:14 arch181 systemd[1]: Stopping Network Manager...
Mar 04 12:43:14 arch181 systemd[1]: Stopping WPA supplicant...
Mar 04 12:43:14 arch181 NetworkManager[359]: <info>  [1614854594.0491] caught SIGTERM, shutting down normally.
Mar 04 12:43:14 arch181 kernel: audit: type=1131 audit(1614854594.046:96): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe>
Mar 04 12:43:14 arch181 kernel: wlp0s20f3: deauthenticating from 60:32:b1:cf:cc:9f by local choice (Reason: 3=DEAUTH_LEAVING)
Mar 04 12:43:14 arch181 wpa_supplicant[411]: wlp0s20f3: CTRL-EVENT-DISCONNECTED bssid=60:32:b1:cf:cc:9f reason=3 locally_generated=1
Mar 04 12:43:14 arch181 NetworkManager[359]: <info>  [1614854594.0637] device (wlp0s20f3): state change: activated -> deactivating (reason 'unmanaged', sys-iface-state:>
Mar 04 12:43:14 arch181 NetworkManager[359]: <info>  [1614854594.0641] manager: NetworkManager state is now DISCONNECTING
Mar 04 12:43:14 arch181 dbus-daemon[357]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service>
Mar 04 12:43:14 arch181 dbus-daemon[357]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.nm-dispatcher.service': Refusing activation, D-Bus is sh>
Mar 04 12:43:14 arch181 NetworkManager[359]: <warn>  [1614854594.0660] dispatcher: (7) failed: Refusing activation, D-Bus is shutting down.
Mar 04 12:43:14 arch181 NetworkManager[359]: <info>  [1614854594.0661] device (wlp0s20f3): state change: deactivating -> unmanaged (reason 'removed', sys-iface-state: '>
Mar 04 12:43:14 arch181 NetworkManager[359]: <info>  [1614854594.0983] dhcp4 (wlp0s20f3): canceled DHCP transaction
Mar 04 12:43:14 arch181 NetworkManager[359]: <info>  [1614854594.0983] dhcp4 (wlp0s20f3): state changed bound -> done
Mar 04 12:43:14 arch181 NetworkManager[359]: <info>  [1614854594.0989] dhcp6 (wlp0s20f3): canceled DHCP transaction
Mar 04 12:43:14 arch181 NetworkManager[359]: <info>  [1614854594.0989] dhcp6 (wlp0s20f3): state changed timeout -> done
Mar 04 12:43:14 arch181 wpa_supplicant[411]: nl80211: deinit ifname=wlp0s20f3 disabled_11b_rates=0
Mar 04 12:43:14 arch181 NetworkManager[359]: <info>  [1614854594.1291] manager: NetworkManager state is now DISCONNECTED
Mar 04 12:43:14 arch181 dbus-daemon[357]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service>
Mar 04 12:43:14 arch181 dbus-daemon[357]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.nm-dispatcher.service': Refusing activation, D-Bus is sh>
Mar 04 12:43:14 arch181 NetworkManager[359]: <info>  [1614854594.1332] device (p2p-dev-wlp0s20f3): state change: disconnected -> unmanaged (reason 'removed', sys-iface->
Mar 04 12:43:14 arch181 dbus-daemon[357]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service>
Mar 04 12:43:14 arch181 dbus-daemon[357]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.nm-dispatcher.service': Refusing activation, D-Bus is sh>
Mar 04 12:43:14 arch181 dbus-daemon[357]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service>
Mar 04 12:43:14 arch181 dbus-daemon[357]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.nm-dispatcher.service': Refusing activation, D-Bus is sh>
Mar 04 12:43:14 arch181 wpa_supplicant[411]: wlp0s20f3: CTRL-EVENT-TERMINATING
Mar 04 12:43:14 arch181 systemd[1]: wpa_supplicant.service: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Stopped WPA supplicant.
Mar 04 12:43:14 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wpa_supplicant comm="systemd" exe="/usr/lib/systemd/systemd" hostnam>
Mar 04 12:43:14 arch181 NetworkManager[359]: <info>  [1614854594.1435] exiting (success)
Mar 04 12:43:14 arch181 kernel: audit: type=1131 audit(1614854594.140:97): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wpa_supplicant comm="systemd" exe="/usr/>
Mar 04 12:43:14 arch181 systemd[1]: NetworkManager.service: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Stopped Network Manager.
Mar 04 12:43:14 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager comm="systemd" exe="/usr/lib/systemd/systemd" hostnam>
Mar 04 12:43:14 arch181 systemd[1]: Stopped target Network (Pre).
Mar 04 12:43:14 arch181 kernel: audit: type=1131 audit(1614854594.156:98): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager comm="systemd" exe="/usr/>
Mar 04 12:43:14 arch181 systemd[1]: Stopping D-Bus System Message Bus...
Mar 04 12:43:14 arch181 systemd[1]: Stopping IPv4 Packet Filtering Framework...
Mar 04 12:43:14 arch181 systemd[1]: dbus.service: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Stopped D-Bus System Message Bus.
Mar 04 12:43:14 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?>
Mar 04 12:43:14 arch181 kernel: audit: type=1131 audit(1614854594.173:99): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/system>
Mar 04 12:43:14 arch181 audit[1658]: NETFILTER_CFG table=filter family=2 entries=21 op=xt_replace pid=1658 comm="iptables-restor"
Mar 04 12:43:14 arch181 kernel: audit: type=1325 audit(1614854594.170:100): table=filter family=2 entries=21 op=xt_replace pid=1658 comm="iptables-restor"
Mar 04 12:43:14 arch181 audit[1658]: NETFILTER_CFG table=raw family=2 entries=4 op=xt_replace pid=1658 comm="iptables-restor"
Mar 04 12:43:14 arch181 systemd[1]: iptables.service: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Stopped IPv4 Packet Filtering Framework.
Mar 04 12:43:14 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=iptables comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? ad>
Mar 04 12:43:14 arch181 kernel: audit: type=1325 audit(1614854594.186:101): table=raw family=2 entries=4 op=xt_replace pid=1658 comm="iptables-restor"
Mar 04 12:43:14 arch181 kernel: audit: type=1131 audit(1614854594.233:102): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=iptables comm="systemd" exe="/usr/lib/s>
Mar 04 12:43:14 arch181 systemd[1]: Stopped target Basic System.
Mar 04 12:43:14 arch181 systemd[1]: Stopped target Paths.
Mar 04 12:43:14 arch181 systemd[1]: Stopped target Slices.
Mar 04 12:43:14 arch181 systemd[1]: Removed slice User and Session Slice.
Mar 04 12:43:14 arch181 systemd[1]: Stopped target Sockets.
Mar 04 12:43:14 arch181 systemd[1]: dbus.socket: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Closed D-Bus System Message Bus Socket.
Mar 04 12:43:14 arch181 systemd[1]: Stopped target System Initialization.
Mar 04 12:43:14 arch181 systemd[1]: Stopped target Local Encrypted Volumes.
Mar 04 12:43:14 arch181 systemd[1]: systemd-ask-password-console.path: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
Mar 04 12:43:14 arch181 systemd[1]: systemd-ask-password-wall.path: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
Mar 04 12:43:14 arch181 systemd[1]: Stopping Load/Save Screen Backlight Brightness of backlight:intel_backlight...
Mar 04 12:43:14 arch181 systemd[1]: systemd-sysctl.service: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Stopped Apply Kernel Variables.
Mar 04 12:43:14 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostnam>
Mar 04 12:43:14 arch181 systemd[1]: systemd-modules-load.service: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Stopped Load Kernel Modules.
Mar 04 12:43:14 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" h>
Mar 04 12:43:14 arch181 systemd[1]: Stopping Update UTMP about System Boot/Shutdown...
Mar 04 12:43:14 arch181 kernel: audit: type=1131 audit(1614854594.256:103): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr>
Mar 04 12:43:14 arch181 systemd[1]: systemd-backlight@backlight:intel_backlight.service: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Stopped Load/Save Screen Backlight Brightness of backlight:intel_backlight.
Mar 04 12:43:14 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr>
Mar 04 12:43:14 arch181 audit[1660]: SYSTEM_SHUTDOWN pid=1660 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update>
Mar 04 12:43:14 arch181 systemd[1]: Removed slice system-systemd\x2dbacklight.slice.
Mar 04 12:43:14 arch181 systemd[1]: systemd-update-utmp.service: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Stopped Update UTMP about System Boot/Shutdown.
Mar 04 12:43:14 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" ho>
Mar 04 12:43:14 arch181 systemd[1]: systemd-tmpfiles-setup.service: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Stopped Create Volatile Files and Directories.
Mar 04 12:43:14 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd">
Mar 04 12:43:14 arch181 systemd[1]: Stopped target Local File Systems.
Mar 04 12:43:14 arch181 systemd[1]: Unmounting /boot...
Mar 04 12:43:14 arch181 systemd[1]: Unmounting Temporary Directory (/tmp)...
Mar 04 12:43:14 arch181 systemd[1]: tmp.mount: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Unmounted Temporary Directory (/tmp).
Mar 04 12:43:14 arch181 systemd[1]: Stopped target Swap.
Mar 04 12:43:14 arch181 systemd[1]: Deactivating swap /dev/disk/by-id/nvme-SAMSUNG_MZALQ256HAJD-000L2_S4ULNF1N758925-part2...
Mar 04 12:43:14 arch181 systemd[1]: boot.mount: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Unmounted /boot.
Mar 04 12:43:14 arch181 systemd[1]: systemd-fsck@dev-disk-by\x2duuid-24AE\x2d3554.service: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Stopped File System Check on /dev/disk/by-uuid/24AE-3554.
Mar 04 12:43:14 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-24AE\x2d3554 comm="systemd" exe="/u>
Mar 04 12:43:14 arch181 systemd[1]: Removed slice system-systemd\x2dfsck.slice.
Mar 04 12:43:14 arch181 systemd[1]: Stopped target Local File Systems (Pre).
Mar 04 12:43:14 arch181 systemd[1]: Stopping Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
Mar 04 12:43:14 arch181 systemd[1]: systemd-remount-fs.service: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Stopped Remount Root and Kernel File Systems.
Mar 04 12:43:14 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hos>
Mar 04 12:43:14 arch181 systemd[1]: systemd-tmpfiles-setup-dev.service: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Stopped Create Static Device Nodes in /dev.
Mar 04 12:43:14 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/syst>
Mar 04 12:43:14 arch181 systemd[1]: dev-disk-by\x2dpath-pci\x2d0000:03:00.0\x2dnvme\x2d1\x2dpart2.swap: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Deactivated swap /dev/disk/by-path/pci-0000:03:00.0-nvme-1-part2.
Mar 04 12:43:14 arch181 systemd[1]: dev-disk-by\x2did-nvme\x2dSAMSUNG_MZALQ256HAJD\x2d000L2_S4ULNF1N758925\x2dpart2.swap: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Deactivated swap /dev/disk/by-id/nvme-SAMSUNG_MZALQ256HAJD-000L2_S4ULNF1N758925-part2.
Mar 04 12:43:14 arch181 systemd[1]: dev-disk-by\x2dpartuuid-6aaa9fcc\x2d48c9\x2d384d\x2dbb31\x2d5d2e59ac96d5.swap: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Deactivated swap /dev/disk/by-partuuid/6aaa9fcc-48c9-384d-bb31-5d2e59ac96d5.
Mar 04 12:43:14 arch181 systemd[1]: dev-disk-by\x2did-nvme\x2deui.002538a701c64e7b\x2dpart2.swap: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Deactivated swap /dev/disk/by-id/nvme-eui.002538a701c64e7b-part2.
Mar 04 12:43:14 arch181 systemd[1]: dev-nvme0n1p2.swap: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Deactivated swap /dev/nvme0n1p2.
Mar 04 12:43:14 arch181 systemd[1]: dev-disk-by\x2duuid-cac42cb0\x2d9a58\x2d43c3\x2d9bdc\x2d46ff9ca505a0.swap: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Deactivated swap /dev/disk/by-uuid/cac42cb0-9a58-43c3-9bdc-46ff9ca505a0.
Mar 04 12:43:14 arch181 systemd[1]: lvm2-monitor.service: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Stopped Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
Mar 04 12:43:14 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=>
Mar 04 12:43:14 arch181 systemd[1]: Reached target Shutdown.
Mar 04 12:43:14 arch181 systemd[1]: Reached target Unmount All Filesystems.
Mar 04 12:43:14 arch181 systemd[1]: Reached target Final Step.
Mar 04 12:43:14 arch181 systemd[1]: systemd-reboot.service: Succeeded.
Mar 04 12:43:14 arch181 systemd[1]: Finished Reboot.

I dont have any failed units. And here is the status of the user@yan (my user) unit if it helps:

 user@yan.service - User Manager for UID yan
     Loaded: loaded (/usr/lib/systemd/system/user@.service; static)
     Active: inactive (dead)
       Docs: man:user@.service(5)

And here is all the user@1000.service status:

● user@1000.service - User Manager for UID 1000
     Loaded: loaded (/usr/lib/systemd/system/user@.service; static)
     Active: active (running) since Thu 2021-03-04 12:43:35 IST; 28min ago
       Docs: man:user@.service(5)
   Main PID: 463 (systemd)
     Status: "Startup finished in 66ms."
      Tasks: 31
     Memory: 22.9M
     CGroup: /user.slice/user-1000.slice/user@1000.service
             ├─app.slice
             │ ├─at-spi-dbus-bus.service
             │ │ ├─744 /usr/lib/at-spi-bus-launcher
             │ │ ├─756 /usr/bin/dbus-daemon --config-file=/usr/share/defaults/at-spi2/accessibility.conf --nofork --print-address 3
             │ │ └─766 /usr/lib/at-spi2-registryd --use-gnome-session
             │ ├─dbus.service
             │ │ └─624 /usr/bin/dbus-daemon --session --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
             │ ├─gvfs-daemon.service
             │ │ ├─681 /usr/lib/gvfsd
             │ │ └─690 /usr/lib/gvfsd-fuse /run/user/1000/gvfs -f
             │ └─pulseaudio.service
             │   ├─678 /usr/bin/pulseaudio --daemonize=no --log-target=journal
             │   └─832 /usr/lib/pulse/gsettings-helper
             └─init.scope
               ├─463 /usr/lib/systemd/systemd --user
               └─464 (sd-pam)

Mar 04 12:43:37 arch181 dbus-daemon[624]: [session uid=1000 pid=624] Successfully activated service 'org.gtk.vfs.Daemon'
Mar 04 12:43:37 arch181 systemd[463]: Started Virtual filesystem service.
Mar 04 12:43:37 arch181 dbus-daemon[624]: [session uid=1000 pid=624] Activating via systemd: service name='org.a11y.Bus' unit='at-spi-dbus-bus.service' requested by ':1>
Mar 04 12:43:37 arch181 systemd[463]: Starting Accessibility services bus...
Mar 04 12:43:37 arch181 dbus-daemon[624]: [session uid=1000 pid=624] Successfully activated service 'org.a11y.Bus'
Mar 04 12:43:37 arch181 systemd[463]: Started Accessibility services bus.
Mar 04 12:43:37 arch181 at-spi-bus-launcher[756]: dbus-daemon[756]: Activating service name='org.a11y.atspi.Registry' requested by ':1.1' (uid=1000 pid=655 comm="subl ")
Mar 04 12:43:37 arch181 at-spi-bus-launcher[756]: dbus-daemon[756]: Successfully activated service 'org.a11y.atspi.Registry'
Mar 04 12:43:37 arch181 at-spi-bus-launcher[766]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Mar 04 12:43:37 arch181 systemd[463]: Started Sound Service.

Finally here is the user.service uint file if it helps:

[Unit]
Description=User Manager for UID %i
Documentation=man:user@.service(5)
After=systemd-user-sessions.service user-runtime-dir@%i.service dbus.service
Requires=user-runtime-dir@%i.service
IgnoreOnIsolate=yes

[Service]
User=%i
PAMName=systemd-user
Type=notify
ExecStart=/usr/lib/systemd/systemd --user
Slice=user-%i.slice
KillMode=mixed
Delegate=pids memory
TasksMax=infinity
TimeoutStopSec=120s
KeyringMode=inherit

Sorry for the long post I'm just trying to give you as much info as I can so maybe someone could help me or at least tell me if it is ok to just reduce the time of the delay.
Thanks for any kind of help.

arch181 · 2021-03-04 12:32:10

I think the problem is somewhere here, because of the time differences so I think that means the process that caused the delay is here somewhere:

Mar 04 12:41:44 arch181 systemd[1]: Stopped User Login Management.
Mar 04 12:41:44 arch181 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostnam>
Mar 04 12:41:44 arch181 audit: BPF prog-id=14 op=UNLOAD
Mar 04 12:41:44 arch181 audit: BPF prog-id=13 op=UNLOAD
Mar 04 12:43:14 arch181 systemd[466]: at-spi-dbus-bus.service: State 'stop-sigterm' timed out. Killing.
Mar 04 12:43:14 arch181 systemd[466]: at-spi-dbus-bus.service: Killing process 755 (at-spi-bus-laun) with signal SIGKILL.
Mar 04 12:43:14 arch181 systemd[466]: at-spi-dbus-bus.service: Killing process 758 (gmain) with signal SIGKILL.
Mar 04 12:43:14 arch181 systemd[466]: at-spi-dbus-bus.service: Main process exited, code=killed, status=9/KILL
Mar 04 12:43:14 arch181 systemd[466]: at-spi-dbus-bus.service: Failed with result 'timeout'.
Mar 04 12:43:14 arch181 systemd[466]: Stopped Accessibility services bus.
Mar 04 12:43:14 arch181 systemd[466]: Stopped target Basic System.

Plus, I tried to login to the root user and startx manually which only executes i3 wm and the i3 executes nothing that I manually customaized on startup and when I rebooted there was a stop job for user uid 0 (for my root user).

Last edited by arch181 (2021-03-04 12:52:37)

V1del · 2021-03-04 12:39:55

By which means are you starting your i3? Via startx? Did you ensure to follow https://wiki.archlinux.org/index.php/Xinit#xinitrc so that your session is setup properly? What's your output of

printenv | grep DBUS

in your i3 session?

arch181 · 2021-03-04 12:57:08

V1del wrote:

By which means are you starting your i3? Via startx? Did you ensure to follow https://wiki.archlinux.org/index.php/Xinit#xinitrc so that your session is setup properly? What's your output of
printenv | grep DBUS
in your i3 session?

Thats the output:

DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus

V1del
And im starting the xsession automatically when i log in this way https://wiki.archlinux.org/index.php/Xi … X_at_login and i put it in the ~/.bash_profile

Last edited by arch181 (2021-03-04 13:03:20)

arch181 · 2021-03-04 13:43:09

I commented the auto start of x session on login in the ~/.bash_profile and I started it manually using startx and the delay was still there kn the reboot. Is that an issue of xorg??
When I stay on the tty1 there is no delay on reboot!

Last edited by arch181 (2021-03-04 13:43:49)

V1del · 2021-03-04 13:49:06

And what does your .xinitrc look like? It should at least follow the template mentioned in

Wiki wrote:

Note: At the very least, ensure that the last if block in /etc/X11/xinit/xinitrc is present in your ~/.xinitrc file to ensure that the scripts in /etc/X11/xinit/xinitrc.d are sourced.

so that the user session is properly tied to the graphical session.

You could also just swing the hammer and mask at-spi-dbus-bus.service if you do not need the accessibility features of GTK applications

arch181 · 2021-03-04 14:01:29

V1del wrote:

And what does your .xinitrc look like? It should at least follow the template mentioned in
Wiki wrote:
Note: At the very least, ensure that the last if block in /etc/X11/xinit/xinitrc is present in your ~/.xinitrc file to ensure that the scripts in /etc/X11/xinit/xinitrc.d are sourced.
so that the user session is properly tied to the graphical session.
You could also just swing the hammer and mask at-spi-dbus-bus.service if you do not need the accessibility features of GTK applications

thats my ~/.xinitrc :

#!/bin/sh

userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap

# merge in defaults and keymaps

if [ -f $sysresources ]; then


    xrdb -merge $sysresources

fi

if [ -f $sysmodmap ]; then
    xmodmap $sysmodmap
fi

if [ -f "$userresources" ]; then




    xrdb -merge "$userresources"

fi

if [ -f "$usermodmap" ]; then
    xmodmap "$usermodmap"
fi

# start some nice programs

if [ -d /etc/X11/xinit/xinitrc.d ] ; then
 for f in /etc/X11/xinit/xinitrc.d/?*.sh ; do
  [ -x "$f" ] && . "$f"
 done
 unset f
fi


#Screen saver settings
xset s off
xset dpms 0 1200 0

#Monitors settings for intel-driver
##xrandr --output eDP1 --mode 1920x1080 --rate 60 --output HDMI1 --off &

#Monitors settings for modesetting
##xrandr --output eDP-1 --mode 1920x1080 --rate 60 --output HDMI-1 --off &

#Executions
exec picom -G &
./.autostart.sh &

#Window manager
exec i3

Note: my modifications starts on the screen saver settings.
By the way, do you mind if you tell what are these the GTK apps V1del???

Last edited by arch181 (2021-03-04 14:01:58)

Scimmia · 2021-03-04 14:04:47

What in the world is ./.autostart.sh? Having something like that that depends on what dir you're in when you run startx is a very bad idea.

Not that it matters, as everything after the first exec doesn't do anything anyway. How is i3 even getting started?

arch181 · 2021-03-04 14:10:36

Scimmia wrote:

What in the world is ./.autostart.sh? Having something like that that depends on what dir you're in when you run startx is a very bad idea.
Not that it matters, as everything after the first exec doesn't do anything anyway. How is i3 even getting started?

Scimmia ./.autostart.sh is just an file that contains few scripts that I made and I execute on startup of x session and it is located on my home dir. Here is the file:

#!/bin/sh

python Projects/python/files/home_backup.py
python Projects/python/files/track_files_ownership.py

By the way I already tried to comment every execution that i added on the .xinitrc except the i3 one but that didn't help.
Lastly I startx automatically on login using the help of the ~/.bash_profile file.

Scimmia · 2021-03-04 14:13:08

You missed both points I raised in my post. That .xinitrc will not even start i3, so how's it getting started.

The second is that running a script with a relative path from .xinitrc is a TERRIBLE idea.

arch181 · 2021-03-04 14:16:06

Scimmia wrote:

You missed both points I raised in my post. That .xinitrc will not even start i3, so how's it getting started.
The second is that running a script with a relative path from .xinitrc is a TERRIBLE idea.

Scimmia The truth idk and i didnt know that it will cause any problems and im using arch for something like 3 months and everything was working fine till yesterday the stop job started delaying my rebooting or poweroff.
Thanks for the note by the way. Ill move the file executions to the i3 config.

Last edited by arch181 (2021-03-04 14:19:04)

arch181 · 2021-03-04 14:24:14

arch181 wrote:

Scimmia wrote:
You missed both points I raised in my post. That .xinitrc will not even start i3, so how's it getting started.
The second is that running a script with a relative path from .xinitrc is a TERRIBLE idea.
Scimmia The truth idk and i didnt know that it will cause any problems and im using arch for something like 3 months and everything was working fine till yesterday the stop job started delaying my rebooting or poweroff.
Thanks for the note by the way. Ill move the file executions to the i3 config.

Do you have any ideas what can i do about the delaying on system shutdown Scimmia??

seth · 2021-03-04 14:39:02

Let's start by figuring what is actually starting i3.
The way it's presented, it's certainly not anything running that xinitrc.

What are the contents of the autostart.sh file?
Also post the output of "loginctl session-status".

arch181 · 2021-03-04 14:39:22

V1del wrote:

And what does your .xinitrc look like? It should at least follow the template mentioned in
Wiki wrote:
Note: At the very least, ensure that the last if block in /etc/X11/xinit/xinitrc is present in your ~/.xinitrc file to ensure that the scripts in /etc/X11/xinit/xinitrc.d are sourced.
so that the user session is properly tied to the graphical session.
You could also just swing the hammer and mask at-spi-dbus-bus.service if you do not need the accessibility features of GTK applications

V1del I just tried to mask at-spi-dbus-bus.service and rebooted, it didnt help becuase it told me that this servic doesnt exists anywy.

Unit at-spi-dbus-bus.service does not exist, proceeding anyway.
Created symlink /etc/systemd/system/at-spi-dbus-bus.service → /dev/null

arch181 · 2021-03-04 14:43:30

seth wrote:

Let's start by figuring what is actually starting i3.
The way it's presented, it's certainly not anything running that xinitrc.
What are the contents of the autostart.sh file?
Also post the output of "loginctl session-status".

sethThats the output of the command:

1 - yan (1000)
           Since: Thu 2021-03-04 16:36:50 IST; 4min 56s ago
          Leader: 405 (login)
            Seat: seat0; vc1
             TTY: tty1
         Service: login; type tty; class user
           State: active
            Unit: session-1.scope
                  ├─ 405 login -- yan
                  ├─ 552 -bash
                  ├─ 565 /bin/sh /usr/bin/startx
1 - yan (1000)
           Since: Thu 2021-03-04 16:36:50 IST; 4min 56s ago
          Leader: 405 (login)
            Seat: seat0; vc1
             TTY: tty1
         Service: login; type tty; class user
           State: active
            Unit: session-1.scope
                  ├─ 405 login -- yan
                  ├─ 552 -bash
                  ├─ 565 /bin/sh /usr/bin/startx
                  ├─ 583 xinit /home/yan/.xinitrc -- /etc/X11/xinit/xserverrc :0 vt1 -keeptty -auth /tmp/serverauth.L9Qxpr6L0B
                  ├─ 584 /usr/lib/Xorg -nolisten tcp :0 vt1 -keeptty -auth /tmp/serverauth.L9Qxpr6L0B
                  ├─ 588 xf86-video-intel-backlight-helper intel_backlight
                  ├─ 594 i3
                  ├─ 603 picom -G
                  ├─ 605 nm-applet
                  ├─ 621 /usr/bin/python /home/yan/Projects/python/system/battery_notif.py
                  ├─ 625 urxvt
                  ├─ 627 /usr/lib/firefox/firefox
                  ├─ 629 subl
                  ├─ 631 pavucontrol
                  ├─ 637 polybar example
                  ├─ 638 tee -a /tmp/polybar1.log
                  ├─ 668 bash
                  ├─ 886 /bin/sh /home/yan/.config/i3/scripts/updates-arch.sh
                  ├─ 962 /usr/lib/firefox/firefox -contentproc -childID 1 -isForBrowser -prefsLen 1 -prefMapSize 240079 -parentBuildID 20210228220141 -appdir /usr/lib/f>
                  ├─ 983 /opt/sublime_text_3/plugin_host 629 --auto-shell-env
                  ├─1055 /usr/lib/firefox/firefox -contentproc -childID 2 -isForBrowser -prefsLen 408 -prefMapSize 240079 -parentBuildID 20210228220141 -appdir /usr/lib>
                  ├─1103 /usr/lib/firefox/firefox -contentproc -childID 3 -isForBrowser -prefsLen 6419 -prefMapSize 240079 -parentBuildID 20210228220141 -appdir /usr/li>
                  ├─1213 /usr/lib/firefox/firefox -contentproc -childID 4 -isForBrowser -prefsLen 7278 -prefMapSize 240079 -parentBuildID 20210228220141 -appdir /usr/li>
                  ├─1267 /bin/sh /home/yan/.config/i3/scripts/updates-arch.sh
                  ├─1268 sleep 900
                  ├─1393 loginctl session-status
                  └─1394 less

Mar 04 16:36:50 arch181 login[405]: LOGIN ON tty1 BY yan
Mar 04 16:37:31 arch181 sudo[1276]:      yan : TTY=pts/0 ; PWD=/home/yan ; USER=root ; COMMAND=/usr/bin/pacman -Syu
Mar 04 16:37:31 arch181 sudo[1276]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000)
Mar 04 16:37:38 arch181 sudo[1276]: pam_unix(sudo:session): session closed for user root
Mar 04 16:37:50 arch181 sudo[1306]:      yan : TTY=pts/0 ; PWD=/home/yan ; USER=root ; COMMAND=/usr/bin/systemctl unmask at-spi-dbus-bus.service
Mar 04 16:37:50 arch181 sudo[1306]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000)
Mar 04 16:37:50 arch181 sudo[1306]: pam_unix(sudo:session): session closed for user root
Mar 04 16:38:44 arch181 sudo[1343]:      yan : TTY=pts/0 ; PWD=/home/yan ; USER=root ; COMMAND=/usr/bin/systemctl mask at-spi-dbus-bus.service
Mar 04 16:38:44 arch181 sudo[1343]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000)
Mar 04 16:38:45 arch181 sudo[1343]: pam_unix(sudo:session): session closed for user root

And thats the content of the autostart.sh file:

#!/bin/sh

python Projects/python/files/home_backup.py
python Projects/python/files/track_files_ownership.py

Note: I commented the line that executes that file to see if it changes anything but it didnt.

Last edited by arch181 (2021-03-04 14:43:55)

seth · 2021-03-04 14:56:16

The xinitrc you posted does not produce this session.
Please post the actual /home/yan/.xinitrc

Next, /home/yan/.config/i3/scripts/updates-arch.sh seems to sleep for 900 seconds (15 minutes) and there's another instance of that script.
So please also post your ~/.config/i3/config and you can immediately test to not run the script.

Neither of the python scripts in your autostart.sh is (still) running.

Scimmia · 2021-03-04 14:56:44

Is that a paste error or do you really have exactly that output from loginctl? That's a real problem if that's what you get.

arch181 · 2021-03-04 15:00:19

seth wrote:

The xinitrc you posted does not produce this session.
Please post the actual /home/yan/.xinitrc
Next, /home/yan/.config/i3/scripts/updates-arch.sh seems to sleep for 900 seconds (15 minutes) and there's another instance of that script.
So please also post your ~/.config/i3/config and you can immediately test to not run the script.
Neither of the python scripts in your autostart.sh is (still) running.

seth first of all thanks, I'll just reboot and post everything.

Scimmia · 2021-03-04 15:01:47

And while you're at it, stop putting a weird link when you use people's nicks.

arch181 · 2021-03-04 15:04:50

Scimmia wrote:

And while you're at it, stop putting a weird link when you use people's nicks.

Sorry i didnt mean that, so to put users link shouuldnt i use "user=2 'username here'/user" option???

Last edited by arch181 (2021-03-04 15:13:14)

arch181 · 2021-03-04 15:10:36

loginctl session-status output:

1 - yan (1000)
           Since: Thu 2021-03-04 17:03:48 IST; 29s ago
          Leader: 397 (login)
1 - yan (1000)
           Since: Thu 2021-03-04 17:03:48 IST; 29s ago
          Leader: 397 (login)
            Seat: seat0; vc1
             TTY: tty1
         Service: login; type tty; class user
           State: active
            Unit: session-1.scope
                  ├─ 397 login -- yan
                  ├─ 474 -bash
                  ├─ 478 /bin/sh /usr/bin/startx
                  ├─ 496 xinit /home/yan/.xinitrc -- /etc/X11/xinit/xserverrc :0 vt1 -keeptty -auth /tmp/serverauth.dJgHC1Aj1i
                  ├─ 497 /usr/lib/Xorg -nolisten tcp :0 vt1 -keeptty -auth /tmp/serverauth.dJgHC1Aj1i
                  ├─ 501 xf86-video-intel-backlight-helper intel_backlight
                  ├─ 507 i3
                  ├─ 516 picom -G
                  ├─ 518 nm-applet
                  ├─ 534 /usr/bin/python /home/yan/Projects/python/system/battery_notif.py
                  ├─ 538 urxvt
                  ├─ 540 /usr/lib/firefox/firefox
                  ├─ 542 subl
                  ├─ 544 pavucontrol
                  ├─ 550 polybar example
                  ├─ 551 tee -a /tmp/polybar1.log
                  ├─ 574 bash
                  ├─ 808 /bin/sh /home/yan/.config/i3/scripts/updates-arch.sh
                  ├─ 893 /opt/sublime_text_3/plugin_host 542 --auto-shell-env
                  ├─ 898 /usr/lib/firefox/firefox -contentproc -childID 1 -isForBrowser -prefsLen 1 -prefMapSize 240079 -parentBuildID 20210228220141 -appdir /usr/lib/f>
                  ├─ 966 /usr/lib/firefox/firefox -contentproc -childID 2 -isForBrowser -prefsLen 405 -prefMapSize 240079 -parentBuildID 20210228220141 -appdir /usr/lib>
                  ├─ 999 /usr/lib/firefox/firefox -contentproc -childID 3 -isForBrowser -prefsLen 6416 -prefMapSize 240079 -parentBuildID 20210228220141 -appdir /usr/li>
                  ├─1104 /usr/lib/firefox/firefox -contentproc -childID 4 -isForBrowser -prefsLen 7275 -prefMapSize 240079 -parentBuildID 20210228220141 -appdir /usr/li>
                  ├─1153 /bin/sh /home/yan/.config/i3/scripts/updates-arch.sh
                  ├─1154 sleep 900
                  ├─1161 loginctl session-status
                  └─1162 less

Mar 04 17:03:48 arch181 login[397]: LOGIN ON tty1 BY yan
Mar 04 17:03:48 arch181 systemd[1]: Started Session 1 of user yan.

Current .xinitrc file:

#!/bin/sh

userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap

# merge in defaults and keymaps

if [ -f $sysresources ]; then


    xrdb -merge $sysresources

fi

if [ -f $sysmodmap ]; then
    xmodmap $sysmodmap
fi

if [ -f "$userresources" ]; then




    xrdb -merge "$userresources"

fi

if [ -f "$usermodmap" ]; then
    xmodmap "$usermodmap"
fi

# start some nice programs

if [ -d /etc/X11/xinit/xinitrc.d ] ; then
 for f in /etc/X11/xinit/xinitrc.d/?*.sh ; do
  [ -x "$f" ] && . "$f"
 done
 unset f
fi


#Screen saver settings
xset s off
xset dpms 0 1200 0

#Monitors settings for intel-driver
##xrandr --output eDP1 --mode 1920x1080 --rate 60 --output HDMI1 --off &

#Monitors settings for modesetting
##xrandr --output eDP-1 --mode 1920x1080 --rate 60 --output HDMI-1 --off &

#Executions
exec picom -G &
##./.autostart.sh &

#Window manager
exec i3

.config/i3/scripts/updates-arch.sh :

#!/bin/sh

STRING_TEMPLATE=' %s : %s\n'
TMP_DIR=/tmp/updates_arch

! [ -d "$TMP_DIR" ] && mkdir "$TMP_DIR"
echo "?" > "$TMP_DIR/pacman"
echo "?" > "$TMP_DIR/aur"

_printupdates() {
    printf "$STRING_TEMPLATE" $(cat "$TMP_DIR/pacman") $(cat "$TMP_DIR/aur")
}

_checkpacman() {
    _pacman_updates=$(checkupdates 2> /dev/null | wc -l)
    [ $? -eq 0 ] && echo "$_pacman_updates" > "$TMP_DIR/pacman"
}

_checkaur() {
    _aur_updates=$(yay -Qum 2> /dev/null | wc -l)
    [ $? -eq 0 ] && echo "$_aur_updates" > "$TMP_DIR/aur"
}

_checkupdates() {
    _checkpacman && _printupdates
    _checkaur && _printupdates
}

# watch for pacman file activity
while inotifywait -e close_write,moved_to,create -q \
    --exclude '.*\.part' /var/lib/pacman/sync > /dev/null
do
    while pgrep pacman 2>&1 > /dev/null; do sleep 1; done
    _checkpacman && _printupdates
done &
pacman_process=$!

# watch for aur file activity
while inotifywait -e close_write,moved_to,create -q \
    "$XDG_CACHE_HOME/yay" > /dev/null
do
    while pgrep yay 2>&1 > /dev/null; do sleep 1; done
    _checkaur && _printupdates
done &
aur_process=$!

# update on USR1 signal
trap _checkupdates USR1

# kill inotifywait processes on exit
trap "kill $pacman_process; kill $aur_process" EXIT

# initial update
_printupdates
_checkupdates
while :
do
    # update every 15min, unless interupted
    sleep 900 && _checkupdates &
    wait $!
done

.config/i3/config :

# i3 config file (v4)
#
# Please see https://i3wm.org/docs/userguide.html for a complete reference!
#
# This config file uses keycodes (bindsym) and was written for the QWERTY
# layout.
#
# To get a config file with the same key positions, but for your current
# layout, use the i3-config-wizard
#

# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
font pango:Iosevka Regular 12

# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
#font pango:Iosevka Regular 12

# The combination of xss-lock, nm-applet and pactl is a popular choice, so
# they are included here as an example. Modify as you see fit.

# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
# screen before suspend. Use loginctl lock-session to lock your screen.
#exec --no-startup-id ~/.config/scripts/lockscreen --transfer-sleep-lock -- i3lock --nofork

# NetworkManager is the most popular way to manage wireless networks on Linux,
# and nm-applet is a desktop environment-independent system tray GUI for it.
exec --no-startup-id nm-applet

# Use pactl to adjust volume in PulseAudio.
set $refresh_i3status killall -SIGUSR1 i3status
bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +5% && $refresh_i3status
bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -5% && $refresh_i3status
bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status
bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3status

# use these keys for focus, movement, and resize directions when reaching for
# the arrows is not convenient
#set $up l
#set $down k
#set $left j
#set $right semicolon

# use Mouse+Mod1 to drag floating windows to their wanted position
floating_modifier Mod1

# start a terminal
bindsym Mod4+t exec urxvt

# kill focused window
bindsym Mod1+Shift+q kill

# start dmenu (a program launcher)
bindsym Mod1+Shift+d exec --no-startup-id dmenu_run
# A more modern dmenu replacement is rofi:
#bindsym Mod1+d exec rofi -show drun
bindsym Mod1+d exec ~/.config/rofi/launchers/slate/launcher.sh

# There also is i3-dmenu-desktop which only displays applications shipping a
# .desktop file. It is a wrapper around dmenu, so you need that installed.
#bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop

# change focus
#bindsym Mod1+$left focus left
#bindsym Mod1+$down focus down
#bindsym Mod1+$up focus up
#bindsym Mod1+$right focus right

# alternatively, you can use the cursor keys:
bindsym Mod1+Left focus left
bindsym Mod1+Down focus down
bindsym Mod1+Up focus up
bindsym Mod1+Right focus right

# move focused window
#bindsym Mod1+Shift+$left move left
#bindsym Mod1+Shift+$down move down
#bindsym Mod1+Shift+$up move up
#bindsym Mod1+Shift+$right move right

# alternatively, you can use the cursor keys:
bindsym Mod1+Shift+Left move left
bindsym Mod1+Shift+Down move down
bindsym Mod1+Shift+Up move up
bindsym Mod1+Shift+Right move right

# split in horizontal orientation
bindsym Mod1+h split h

# split in vertical orientation
bindsym Mod1+v split v

# enter fullscreen mode for the focused container
bindsym Mod1+f fullscreen toggle

# change container layout (stacked, tabbed, toggle split)
bindsym Mod1+s layout stacking
bindsym Mod1+w layout tabbed
bindsym Mod1+e layout toggle split

# toggle tiling / floating
bindsym Mod1+Shift+space floating toggle

# change focus between tiling / floating windows
bindsym Mod1+space focus mode_toggle

# focus the parent container
#bindsym Mod1+a focus parent

# focus the child container
#bindsym Mod1+c focus child

# move the currently focused window to the scratchpad
bindsym Mod1+Shift+minus move scratchpad

# Show the next scratchpad window or hide the focused scratchpad window.
# If there are multiple scratchpad windows, this command cycles through them.
bindsym Mod1+minus scratchpad show

# Define names for default workspaces for which we configure key bindings later on.
# We use variables to avoid repeating the names in multiple places.
set $ws1 "1"
set $ws2 "2"
set $ws3 "3"
set $ws4 "4"
set $ws5 "5"
set $ws6 "6"
set $ws7 "7"
set $ws8 "8"
set $ws9 "9"
set $ws10 "10"

# switch to workspace
bindsym Mod1+1 workspace number $ws1
bindsym Mod1+2 workspace number $ws2
bindsym Mod1+3 workspace number $ws3
bindsym Mod1+4 workspace number $ws4
bindsym Mod1+5 workspace number $ws5
bindsym Mod1+6 workspace number $ws6
bindsym Mod1+7 workspace number $ws7
bindsym Mod1+8 workspace number $ws8
bindsym Mod1+9 workspace number $ws9
bindsym Mod1+0 workspace number $ws10

# move focused container to workspace
bindsym Mod1+Shift+1 move container to workspace number $ws1
bindsym Mod1+Shift+2 move container to workspace number $ws2
bindsym Mod1+Shift+3 move container to workspace number $ws3
bindsym Mod1+Shift+4 move container to workspace number $ws4
bindsym Mod1+Shift+5 move container to workspace number $ws5
bindsym Mod1+Shift+6 move container to workspace number $ws6
bindsym Mod1+Shift+7 move container to workspace number $ws7
bindsym Mod1+Shift+8 move container to workspace number $ws8
bindsym Mod1+Shift+9 move container to workspace number $ws9
bindsym Mod1+Shift+0 move container to workspace number $ws10

# reload the configuration file
bindsym Mod1+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym Mod1+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"

# resize window (you can also use the mouse for that)
mode "resize" {
        # These bindings trigger as soon as you enter the resize mode

        # Pressing left will shrink the window’s width.
        # Pressing right will grow the window’s width.
        # Pressing up will shrink the window’s height.
        # Pressing down will grow the window’s height.
        #bindsym $left       resize shrink width 10 px or 10 ppt
        #bindsym $down       resize grow height 10 px or 10 ppt
        #bindsym $up         resize shrink height 10 px or 10 ppt
        #bindsym $right      resize grow width 10 px or 10 ppt

        # same bindings, but for the arrow keys
        bindsym Left        resize shrink width 10 px or 10 ppt
        bindsym Down        resize grow height 10 px or 10 ppt
        bindsym Up          resize shrink height 10 px or 10 ppt
        bindsym Right       resize grow width 10 px or 10 ppt

        # back to normal: Enter or Escape or Mod1+r
        bindsym Return mode "default"
        bindsym Escape mode "default"
        bindsym Mod1+r mode "default"
}

bindsym Mod1+r mode "resize"

#Window colors
set $bgcolor #00838f
set $ibgcolor #263238
set $textcolor #e0e0e0
set $ubgcolor #ff0000
#               border      background      text        indicator    child_border
client.focused  $bgcolor   $bgcolor        $textcolor  $ibgcolor     $bgcolor
client.unfocused $ibgcolor  $ibgcolor       $textcolor  $ibgcolor    $bgcolor
client.focused_inactive $ibgcolor $ibgcolor $textcolor  $ibgcolor    $ibgcolor
client.urgent    $ubgcolor  $ubgcolor       $textcolor  $ubgcolor    $ubgcolor


# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
#bar {
#        status_command i3blocks
#        i3bar_command i3bar --transparency
#        tray_output none
#        font pango:Iosevka Bold 13
#        colors {
#            background $ibgcolor
#            statusline $textcolor
#            separator $textcolor
##                   border          background           text
#focused_workspace   $textcolor      $textcolor           $bgcolor
#active_workspace    $textcolor      $textcolor           $bgcolor
#inactive_workspace  $ibgcolor       $ibgcolor            $textcolor
#urgent_workspace    $ubgcolor       $ubgcolor            $ibgcolor
#        }
#}


#######################################################################
# automatically start i3-config-wizard to offer the user to create a
# keysym-based config which used their favorite modifier (alt or windows)
#
# i3-config-wizard will not launch if there already is a config file
# in ~/.config/i3/config (or $XDG_CONFIG_HOME/i3/config if set) or
# ~/.i3/config.
#
#
########################################################################

#Packages to execute on startup
exec nitrogen --restore
exec i3-msg 'workspace 1; exec urxvt'
exec i3-msg 'workspace 2; exec firefox'
exec i3-msg 'workspace 3; exec subl'
exec i3-msg 'workspace 4; exec pavucontrol'
exec i3-msg "workspace $ws1"

#Add keyboards 
exec setxkbmap -layout us,il -option grp:win_space_toggle

#Start spotify
bindsym Mod4+s exec spotify

#Start bluetooth-manager
bindsym Mod4+b exec blueman-manager

#Start sound manager (pavucontrol)
bindsym Mod4+v exec pavucontrol

#Start sublime-text
bindsym Mod4+a exec subl

#Start firefox
bindsym Mod4+w exec firefox

#Start file manager
bindsym Mod4+f exec thunar-file-manager

#Start zoom
bindsym Mod4+z exec zoom

#Start disk analayzer
bindsym Mod4+d exec disk-analayzer

#Start system monitor
bindsym Mod4+m exec system-monitor

#Start powermenu
bindsym Mod1+m exec ~/.config/rofi/powermenu/powermenu.sh

#Open quick links menu
bindsym Mod1+q exec ~/.config/rofi/applets/applets/quicklinks.sh

#Increase brightness
bindsym XF86MonBrightnessUp exec brightnessctl --device='intel_backlight' set +5%

#Decrease brightness
bindsym XF86MonBrightnessDown exec brightnessctl --device='intel_backlight' set 5%-

#Change screens output for intel-drivers
bindsym Mod4+p exec xrandr --output eDP1 --mode 1920x1080 --rate 60 --output HDMI1 --off #Internal screen
bindsym Mod1+p exec xrandr --output HDMI1 --mode 1920x1080 --rate 60 --output eDP1 --off #External screen
bindsym Mod1+Shift+p exec xrandr --output HDMI1 --mode 1920x1080 --rate 60 --output eDP1 --mode 1920x1080 --rate 60 #Duplicate

#Change screens output for modesetting
##bindsym Mod4+p exec xrandr --output eDP-1 --mode 1920x1080 --rate 60 --output HDMI-1 --off #Internal screen
##bindsym Mod1+p exec xrandr --output HDMI-1 --mode 1920x1080 --rate 60 --output eDP-1 --off #External screen
##bindsym Mod1+Shift+p exec xrandr --output HDMI-1 --mode 1920x1080 --rate 60 --output eDP-1 --mode 1920x1080 --rate 60 #Duplicate

#Control sony headphones
bindsym Mod1+Shift+s exec bluetoothctl connect 94:DB:56:F0:64:3F #Connect to sony headphones
bindsym Mod4+Shift+s exec bluetoothctl disconnect 94:DB:56:F0:64:3F #Disconnect sony headphones

# Media player controls
bindsym XF86AudioPlay exec playerctl pause
bindsym F9 exec playerctl play
bindsym XF86AudioStop exec playerctl stop
bindsym XF86AudioNext exec playerctl next
bindsym XF86AudioPrev exec playerctl previous

#Lock screen
bindsym Mod1+l exec ~/.config/i3/scripts/lockscreen

#polybar luanch script
exec_always --no-startup-id $HOME/.config/polybar/launch.sh

#Execute trash cleaner
bindsym Mod1+c exec ~/Projects/python/files/trash_cleaner.py

#Execute home backup
exec $HOME/Projects/python/system/battery_notif.py

arch181 · 2021-03-04 15:11:56

seth wrote:

The xinitrc you posted does not produce this session.
Please post the actual /home/yan/.xinitrc
Next, /home/yan/.config/i3/scripts/updates-arch.sh seems to sleep for 900 seconds (15 minutes) and there's another instance of that script.
So please also post your ~/.config/i3/config and you can immediately test to not run the script.
Neither of the python scripts in your autostart.sh is (still) running.

I just posted it seth

Last edited by arch181 (2021-03-04 15:12:09)

arch181 · 2021-03-04 15:22:44

The 2 scripts in the autostart.sh are just scripts that do few things on startup and after that they end.
The updates-arch.sh one I think i got from github for showing if there any updates for pacman packages and the aur ones.
It is executed on the polybar, so here is the polybar config if it helps:

;==========================================================
;
;
;   ██████╗  ██████╗ ██╗  ██╗   ██╗██████╗  █████╗ ██████╗
;   ██╔══██╗██╔═══██╗██║  ╚██╗ ██╔╝██╔══██╗██╔══██╗██╔══██╗
;   ██████╔╝██║   ██║██║   ╚████╔╝ ██████╔╝███████║██████╔╝
;   ██╔═══╝ ██║   ██║██║    ╚██╔╝  ██╔══██╗██╔══██║██╔══██╗
;   ██║     ╚██████╔╝███████╗██║   ██████╔╝██║  ██║██║  ██║
;   ╚═╝      ╚═════╝ ╚══════╝╚═╝   ╚═════╝ ╚═╝  ╚═╝╚═╝  ╚═╝
;
;
;   To learn more about how to configure Polybar
;   go to https://github.com/polybar/polybar
;
;   The README contains a lot of information
;
;==========================================================

[colors]
;background = ${xrdb:color0:#222}
background = #CC212121
background-alt = #E600838f
;foreground = ${xrdb:color7:#222}
foreground = #e0e0e0
foreground-alt = #e0e0e0
primary = #CC212121
secondary = #e0e0e0
alert = #bd2c40

[bar/example]
;monitor = ${env:MONITOR:HDMI-1}
width = 100%
height = 32
;offset-x = 1%
;offset-y = 1%
radius = 0.0
fixed-center = false

background = ${colors.background}
foreground = ${colors.foreground}

line-size = 3
line-color = #E600838f

border-size = 0
border-color = #00000000

padding-left = 0
padding-right = 2

module-margin-left = 3
module-margin-right = 2

font-0 = fixed:pixelsize=12;1
font-1 = unifont:fontformat=truetype:size=9:antialias=false;0
font-2 = siji:pixelsize=12;1
font-3 = Font Awesome 5 Free:pixelsize=14;2
font-4 = Font Awesome 5 Free Solid:pixelsize=14;2
font-5 = Font Awesome 5 Free Brands:pixelsize=14;2

modules-left = i3
modules-center = none
modules-right = updates-arch-combined filesystem pulseaudio xkeyboard wlan eth battery date
#backlight-acpi

separator = |

tray-position = right
tray-padding = 0
;tray-background = #0063ff

;wm-restack = bspwm
;wm-restack = i3

;override-redirect = true

;scroll-up = bspwm-desknext
;scroll-down = bspwm-deskprev

;scroll-up = i3wm-wsnext
;scroll-down = i3wm-wsprev

cursor-click = pointer
cursor-scroll = ns-resize

[module/updates-arch-combined]
type = custom/script
exec = ~/.config/i3/scripts/updates-arch.sh
tail = true
click-left = pkill -USR1 updates_arch.sh

[module/xwindow]
type = internal/xwindow
label = %title:0:30:...%

[module/xkeyboard]
type = internal/xkeyboard
blacklist-0 = num lock

format-prefix = " "
format-prefix-foreground = #e0e0e0
format-prefix-underline = #e0e0e0

label-layout =  %layout%
label-layout-underline = #e0e0e0

label-indicator-padding = 0
label-indicator-margin = 2
label-indicator-background = #CC212121
label-indicator-underline = #CC212121

[module/filesystem]
type = internal/fs
interval = 25

mount-0 = /

label-mounted =  %free%
label-unmounted = %mountpoint% not mounted
label-unmounted-foreground = #CC212121

[module/bspwm]
type = internal/bspwm

label-focused = %index%
label-focused-background = ${colors.background-alt}
label-focused-underline= ${colors.primary}
label-focused-padding = 2

label-occupied = %index%
label-occupied-padding = 2

label-urgent = %index%!
label-urgent-background = ${colors.alert}
label-urgent-padding = 2

label-empty = %index%
label-empty-foreground = ${colors.foreground-alt}
label-empty-padding = 2

; Separator in between workspaces
; label-separator = |

[module/i3]
type = internal/i3
format = <label-state> <label-mode>
index-sort = true
wrapping-scroll = false

; Only show workspaces on the same output as the bar
;pin-workspaces = true

;ws-icon-0 = 1
;ws-icon-1 = 2
;ws-icon-2 = 3
;ws-icon-3 = 4

label-mode-padding = 2
label-mode-foreground = #000
label-mode-background = ${colors.primary}

; focused = Active workspace on focused monitor
label-focused = %index%
label-focused-background = ${colors.background-alt}
label-focused-underline= ${colors.primary}
label-focused-padding = 2

; unfocused = Inactive workspace on any monitor
label-unfocused = %index%
label-unfocused-padding = 2

; visible = Active workspace on unfocused monitor
label-visible = %index%
label-visible-background = ${self.label-focused-background}
label-visible-underline = ${self.label-focused-underline}
label-visible-padding = ${self.label-focused-padding}

; urgent = Workspace with urgency hint set
label-urgent = %index%
label-urgent-background = ${colors.alert}
label-urgent-padding = 2

; Separator in between workspaces
; label-separator = |


[module/mpd]
type = internal/mpd
format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>

icon-prev = 
icon-stop = 
icon-play = 
icon-pause = 
icon-next = 

label-song-maxlen = 25
label-song-ellipsis = true

[module/xbacklight]
type = internal/xbacklight

format = <label> <bar>
label = BL

bar-width = 10
bar-indicator = |
bar-indicator-foreground = #fff
bar-indicator-font = 2
bar-fill = ─
bar-fill-font = 2
bar-fill-foreground = #9f78e1
bar-empty = ─
bar-empty-font = 2
bar-empty-foreground = ${colors.foreground-alt}

[module/backlight-acpi]
label =  %percentage%%
inherit = module/xbacklight
type = internal/backlight
card = intel_backlight
bar-fill = ─

[module/cpu]
type = internal/cpu
interval = 2
format-prefix = " "
format-prefix-foreground = ${colors.foreground-alt}
format-underline = #f90000
label = %percentage:2%%

[module/memory]
type = internal/memory
interval = 2
format-prefix = " "
format-prefix-foreground = ${colors.foreground-alt}
format-underline = #4bffdc
label = %percentage_used%%

[module/wlan]
type = internal/network
interface = wlp0s20f3
interval = 3.0

format-connected = <ramp-signal> <label-connected>
format-connected-underline = #e0e0e0
label-connected =  %essid% (%signal%%)

format-disconnected =
;format-disconnected = <label-disconnected>
;format-disconnected-underline = #e0e0e0
;label-disconnected = %ifname% disconnected
;label-disconnected-foreground = ${colors.foreground-alt}

ramp-signal-0 = 
ramp-signal-1 = 
ramp-signal-2 = 
ramp-signal-3 = 
ramp-signal-4 = 
ramp-signal-foreground = ${colors.foreground-alt}

[module/eth]
type = internal/network
interface = net0
interval = 3.0

format-connected-underline = #55aa55
format-connected-prefix = " "
format-connected-prefix-foreground = ${colors.foreground-alt}
label-connected = %local_ip%

format-disconnected =
;format-disconnected = <label-disconnected>
;format-disconnected-underline = ${self.format-connected-underline}
;label-disconnected = %ifname% disconnected
;label-disconnected-foreground = ${colors.foreground-alt}

[module/date]
type = internal/date
interval = 5

date =
date-alt = "  %Y-%m-%d "

time =  %H:%M
time-alt =  %H:%M:%S

format-prefix = 
format-prefix-foreground = ${colors.foreground-alt}
format-underline = #e0e0e0

label = %date% %time%

[module/pulseaudio]
type = internal/pulseaudio

format-volume = <label-volume> <bar-volume>
label-volume =  %percentage%%
label-volume-foreground = ${root.foreground}

label-muted = ?
label-muted-foreground = #e0e0e0

bar-volume-width = 10
bar-volume-foreground-0 = #55aa55
bar-volume-foreground-1 = #55aa55
bar-volume-foreground-2 = #E600838f
bar-volume-foreground-3 = #E600838f
bar-volume-foreground-4 = #E600838f
bar-volume-foreground-5 = #E600838f
bar-volume-foreground-6 = #E600838f
bar-volume-gradient = flase
bar-volume-indicator =
bar-volume-indicator-font = 2
bar-volume-fill = ─
bar-volume-fill-font = 2
bar-volume-empty = ─
bar-volume-empty-font = 2
bar-volume-empty-foreground = #e0e0e0s

[module/alsa]
type = internal/alsa

format-volume = <label-volume> <bar-volume>
label-volume = VOL
label-volume-foreground = ${root.foreground}

format-muted-prefix = " "
format-muted-foreground = ${colors.foreground-alt}
label-muted = sound muted

bar-volume-width = 10
bar-volume-foreground-0 = #55aa55
bar-volume-foreground-1 = #55aa55
bar-volume-foreground-2 = #55aa55
bar-volume-foreground-3 = #55aa55
bar-volume-foreground-4 = #55aa55
bar-volume-foreground-5 = #f5a70a
bar-volume-foreground-6 = #ff5555
bar-volume-gradient = false
bar-volume-indicator = |
bar-volume-indicator-font = 2
bar-volume-fill = ─
bar-volume-fill-font = 2
bar-volume-empty = ─
bar-volume-empty-font = 2
bar-volume-empty-foreground = ${colors.foreground-alt}

[module/battery]
type = internal/battery
battery = BAT0
adapter = ADP1
full-at = 98

format-charging =  <animation-charging> <label-charging>
format-charging-underline = #00c853

format-discharging =  <animation-discharging> <label-discharging>
format-discharging-underline = #e0e0e0

format-full-prefix = "  "
format-full-prefix-foreground = ${colors.foreground-alt}
format-full-underline = #e0e0e0

ramp-capacity-0 = 
ramp-capacity-1 = 
ramp-capacity-2 = 
ramp-capacity-foreground = ${colors.foreground-alt}

animation-charging-0 = 
animation-charging-1 = 
animation-charging-2 = 
animation-charging-foreground = ${colors.foreground-alt}
animation-charging-framerate = 750

animation-discharging-0 = 
animation-discharging-1 = 
animation-discharging-2 = 
animation-discharging-foreground = ${colors.foreground-alt}
animation-discharging-framerate = 750

[module/temperature]
type = internal/temperature
thermal-zone = 0
warn-temperature = 60

format = <ramp> <label>
format-underline = #f50a4d
format-warn = <ramp> <label-warn>
format-warn-underline = ${self.format-underline}

label = %temperature-c%
label-warn = %temperature-c%
label-warn-foreground = ${colors.secondary}

ramp-0 = 
ramp-1 = 
ramp-2 = 
ramp-foreground = ${colors.foreground-alt}


[settings]
screenchange-reload = true
;compositing-background = xor
;compositing-background = screen
;compositing-foreground = source
;compositing-border = over
;pseudo-transparency = false

[global/wm]
margin-top = 5
margin-bottom = 5

; vim:ft=dosini

[bar/mybar]
override-redirect = true
wm-restack = i3

Last edited by arch181 (2021-03-04 15:43:02)

seth · 2021-03-04 15:49:05

First of all, replace "exec picom -G &" with just "picom -G &"
Second, remove/comment the updates-arch.sh invocation in the polybar config and see whether the stop job remains.
Third, while your session-status certainly looks like a botched copy and paste from the pager, please address Scimmias question in this regard
Fourth: do not bump. Just edit your previous post if nobody has replied so far.
Fifth, it's somewhat common to address people like "@arch181" but that's rarely required anyway unless you really need to make clear that you're addressing someone specifically.

arch181 · 2021-03-04 16:06:44

seth wrote:

First of all, replace "exec picom -G &" with just "picom -G &"
Second, remove/comment the updates-arch.sh invocation in the polybar config and see whether the stop job remains.
Third, while your session-status certainly looks like a botched copy and paste from the pager, please address Scimmias question in this regard
Fourth: do not bump. Just edit your previous post if nobody has replied so far.
Fifth, it's somewhat common to address people like "@arch181" but that's rarely required anyway unless you really need to make clear that you're addressing someone specifically.

still didnt solve it, sorry for all the trouble .
Here is my current session status:

1 - yan (1000)
           Since: Thu 2021-03-04 18:06:22 IST; 59s ago
          Leader: 405 (login)
            Seat: seat0; vc1
             TTY: tty1
         Service: login; type tty; class user
           State: active
            Unit: session-1.scope
                  ├─ 405 login -- yan
                  ├─ 477 -bash
                  ├─ 595 /bin/sh /usr/bin/startx
                  ├─ 613 xinit /home/yan/.xinitrc -- /etc/X11/xinit/xserverrc :0 vt1 -keeptty -auth /tmp/serverauth.3Kcgmfpw6L
                  ├─ 614 /usr/lib/Xorg -nolisten tcp :0 vt1 -keeptty -auth /tmp/serverauth.3Kcgmfpw6L
                  ├─ 618 xf86-video-intel-backlight-helper intel_backlight
                  ├─ 624 i3
                  ├─ 633 picom -G
                  ├─ 641 nm-applet
                  ├─ 657 /usr/bin/python /home/yan/Projects/python/system/battery_notif.py
                  ├─ 661 urxvt
                  ├─ 663 /usr/lib/firefox/firefox
                  ├─ 665 subl
                  ├─ 671 polybar example
                  ├─ 672 tee -a /tmp/polybar1.log
                  ├─ 674 pavucontrol
                  ├─ 713 bash
                  ├─ 937 /usr/lib/firefox/firefox -contentproc -childID 1 -isForBrowser -prefsLen 1 -prefMapSize 240094 -parentBuildID 20210228220141 -appdir /usr/lib/f>
                  ├─ 949 /opt/sublime_text_3/plugin_host 665 --auto-shell-env
                  ├─1060 /usr/lib/firefox/firefox -contentproc -childID 2 -isForBrowser -prefsLen 344 -prefMapSize 240094 -parentBuildID 20210228220141 -appdir /usr/lib>
                  ├─1091 /usr/lib/firefox/firefox -contentproc -childID 3 -isForBrowser -prefsLen 6355 -prefMapSize 240094 -parentBuildID 20210228220141 -appdir /usr/li>
                  ├─1183 /usr/lib/firefox/firefox -contentproc -childID 4 -isForBrowser -prefsLen 7214 -prefMapSize 240094 -parentBuildID 20210228220141 -appdir /usr/li>
                  ├─1247 loginctl session-status
                  └─1248 less

Mar 04 18:06:22 arch181 systemd[1]: Started Session 1 of user yan.
Mar 04 18:06:22 arch181 login[405]: LOGIN ON tty1 BY yan

And thats my .xinitrc:

#!/bin/sh

userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap

# merge in defaults and keymaps

if [ -f $sysresources ]; then


    xrdb -merge $sysresources

fi

if [ -f $sysmodmap ]; then
    xmodmap $sysmodmap
fi

if [ -f "$userresources" ]; then




    xrdb -merge "$userresources"

fi

if [ -f "$usermodmap" ]; then
    xmodmap "$usermodmap"
fi

# start some nice programs

if [ -d /etc/X11/xinit/xinitrc.d ] ; then
 for f in /etc/X11/xinit/xinitrc.d/?*.sh ; do
  [ -x "$f" ] && . "$f"
 done
 unset f
fi


#Screen saver settings
xset s off
xset dpms 0 1200 0

#Monitors settings for intel-driver
##xrandr --output eDP1 --mode 1920x1080 --rate 60 --output HDMI1 --off &

#Monitors settings for modesetting
##xrandr --output eDP-1 --mode 1920x1080 --rate 60 --output HDMI-1 --off &

#Executions
picom -G &
##./.autostart.sh &

#Window manager
exec i3

Note: I tried to start sway (wayland) instead of i3 (xorg) and the problem wasnt there.

Last edited by arch181 (2021-03-04 16:16:27)

Arch Linux

#1 2021-03-04 12:06:45

A stop job running for user manager uid 1000 while using WM and not DE

#2 2021-03-04 12:32:10

Re: A stop job running for user manager uid 1000 while using WM and not DE

#3 2021-03-04 12:39:55

Re: A stop job running for user manager uid 1000 while using WM and not DE

#4 2021-03-04 12:57:08

Re: A stop job running for user manager uid 1000 while using WM and not DE

#5 2021-03-04 13:43:09

Re: A stop job running for user manager uid 1000 while using WM and not DE

#6 2021-03-04 13:49:06

Re: A stop job running for user manager uid 1000 while using WM and not DE

#7 2021-03-04 14:01:29

Re: A stop job running for user manager uid 1000 while using WM and not DE

#8 2021-03-04 14:04:47

Re: A stop job running for user manager uid 1000 while using WM and not DE

#9 2021-03-04 14:10:36

Re: A stop job running for user manager uid 1000 while using WM and not DE

#10 2021-03-04 14:13:08

Re: A stop job running for user manager uid 1000 while using WM and not DE

#11 2021-03-04 14:16:06

Re: A stop job running for user manager uid 1000 while using WM and not DE

#12 2021-03-04 14:24:14

Re: A stop job running for user manager uid 1000 while using WM and not DE

#13 2021-03-04 14:39:02

Re: A stop job running for user manager uid 1000 while using WM and not DE

#14 2021-03-04 14:39:22

Re: A stop job running for user manager uid 1000 while using WM and not DE

#15 2021-03-04 14:43:30

Re: A stop job running for user manager uid 1000 while using WM and not DE

#16 2021-03-04 14:56:16

Re: A stop job running for user manager uid 1000 while using WM and not DE

#17 2021-03-04 14:56:44

Re: A stop job running for user manager uid 1000 while using WM and not DE

#18 2021-03-04 15:00:19

Re: A stop job running for user manager uid 1000 while using WM and not DE

#19 2021-03-04 15:01:47

Re: A stop job running for user manager uid 1000 while using WM and not DE

#20 2021-03-04 15:04:50

Re: A stop job running for user manager uid 1000 while using WM and not DE

#21 2021-03-04 15:10:36

Re: A stop job running for user manager uid 1000 while using WM and not DE

#22 2021-03-04 15:11:56

Re: A stop job running for user manager uid 1000 while using WM and not DE

#23 2021-03-04 15:22:44

Re: A stop job running for user manager uid 1000 while using WM and not DE

#24 2021-03-04 15:49:05

Re: A stop job running for user manager uid 1000 while using WM and not DE

#25 2021-03-04 16:06:44

Re: A stop job running for user manager uid 1000 while using WM and not DE

Board footer