You are not logged in.
I have the following rig:
$ lsblk -f
NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINT
sda
├─sda1 vfat FAT32 EFIGAME 3B7E-D14F 352,9M 29% /boot
├─sda2 swap 1 e7b735a0-c898-463f-ac16-31d5597ffbc0 [SWAP]
└─sda3 btrfs gnugame 53f33fba-f1d7-4eb7-9a8f-0b917d3e787b 562,7G 39% /home
nvme1n1
├─nvme1n1p1 vfat FAT32 GNUKDE BE8E-CECD
├─nvme1n1p2 swap 1 a0ed79b0-0600-4d0e-8584-ca74ae3be3e1
└─nvme1n1p3 btrfs arch fdfabdb0-9cab-4cf3-aeb1-b954269a2def
nvme0n1
├─nvme0n1p1 vfat FAT32 GNUGNOME 3749-89B4
├─nvme0n1p2 swap 1 ef7b4722-edd0-439c-ad45-07ee9cf78ee7
└─nvme0n1p3 btrfs GNUGNOME 712dd542-d981-4ad1-9d2f-890253a790e5 All of them are Arch. When booted into HDD temperatures are as follows:
# sensors
iwlwifi_1-virtual-0
Adapter: Virtual device
temp1: +54.0°C
BAT0-acpi-0
Adapter: ACPI interface
in0: 12.74 V
curr1: 0.00 A
nvme-pci-0300
Adapter: PCI adapter
Composite: +43.9°C (low = -273.1°C, high = +83.8°C)
(crit = +84.8°C)
Sensor 1: +43.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +40.9°C (low = -273.1°C, high = +65261.8°C)
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +53.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +51.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +51.0°C (high = +100.0°C, crit = +100.0°C)
Core 2: +51.0°C (high = +100.0°C, crit = +100.0°C)
Core 3: +52.0°C (high = +100.0°C, crit = +100.0°C)
Core 4: +53.0°C (high = +100.0°C, crit = +100.0°C)
Core 5: +52.0°C (high = +100.0°C, crit = +100.0°C)
pch_cometlake-virtual-0
Adapter: Virtual device
temp1: +60.0°C
nvme-pci-0200
Adapter: PCI adapter
Composite: +38.9°C (low = -273.1°C, high = +80.8°C)
(crit = +81.8°C)
Sensor 1: +38.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +40.9°C (low = -273.1°C, high = +65261.8°C)
acpitz-acpi-0
Adapter: ACPI interface
temp1: +53.0°C (crit = +100.0°C)
temp2: +53.0°C (crit = +100.0°C)On the other hand when booted into NVME temperatures are as follows:
# sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +66.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +63.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +64.0°C (high = +100.0°C, crit = +100.0°C)
Core 2: +63.0°C (high = +100.0°C, crit = +100.0°C)
Core 3: +64.0°C (high = +100.0°C, crit = +100.0°C)
Core 4: +64.0°C (high = +100.0°C, crit = +100.0°C)
Core 5: +65.0°C (high = +100.0°C, crit = +100.0°C)
BAT0-acpi-0
Adapter: ACPI interface
in0: 12.74 V
curr1: 0.00 A
nvme-pci-0300
Adapter: PCI adapter
Composite: +42.9°C (low = -273.1°C, high = +83.8°C)
(crit = +84.8°C)
Sensor 1: +42.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +44.9°C (low = -273.1°C, high = +65261.8°C)
iwlwifi_1-virtual-0
Adapter: Virtual device
temp1: +51.0°C
pch_cometlake-virtual-0
Adapter: Virtual device
temp1: +70.0°C
nvme-pci-0200
Adapter: PCI adapter
Composite: +40.9°C (low = -273.1°C, high = +80.8°C)
(crit = +81.8°C)
Sensor 1: +40.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +43.9°C (low = -273.1°C, high = +65261.8°C)
acpitz-acpi-0
Adapter: ACPI interface
temp1: +66.0°C (crit = +100.0°C)
temp2: +66.0°C (crit = +100.0°C)
Disturbing part is that the fans are very noisy when the computer is idle.
Last edited by mergen (2021-04-19 19:37:56)
Offline
Solved by powertop --auto-tune
Offline