SOLVED-Pulseaudio doesn't let me record internal audio and mic anymore

Allexj · 2021-04-27 11:27:14

I have an issue with Pulseaudio. Basically to be able to share my internal system audio to people, I created a monitor fake microphone that has both my real microphone and the internal audio.

Here's the script that I used:

#!/bin/bash

konsole -e "su -c systemctl start acpid"

pactl unload-module module-null-sink && pactl unload-module module-loopback && pactl load-module module-null-sink sink_name="FakeMicrophone" sink_properties=device.description="FakeMicrophone" && pactl load-module module-loopback latency_msec=1 source=alsa_input.pci-0000_03_00.6.analog-stereo sink=FakeMicrophone && pactl load-module module-loopback latency_msec=1 source=alsa_output.pci-0000_03_00.6.analog-stereo.monitor sink=FakeMicrophone

It has always worked well.

The issue came today when I unplugged my earbuds from the computer jack. In fact, in order to avoid echoes and volume issues, before unplugging earbuds I always execute this script:

#!/bin/bash

pactl unload-module module-null-sink && pactl unload-module module-loopback

but this time I forgot it.... and when I unplugged earbuds I heard a bad noise and then I immediately muted the speaker and disabled fakemicrophone with this above script.

After this issue I couldn't be able to use the fake microphone method anymore to share internal audio. I rebooted several times without any success. I tried reinstalling pulseaudio and pavucontrol, but nothing. When I select the fakemicrophone in "Recording" tab in pavucontrol, it isn't alive. It doesn't get neither my real microphone and internal audio. Nothing.

Another strange thing is that after I reboot, the speaker are muted after I login. I don't know why, since when I reboot it has always been non muted, until today.

These are some logs of pulseaudio when I try to enable the fake microphone with the script above:

I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1292 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1292 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1292 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1292 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1292 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1292 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1292 usec of audio from queue
W: [pulseaudio] module-loopback.c: Too many underruns, increasing latency to 12,00 ms
I: [null-sink] module-loopback.c: Dropping 1201 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1292 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1292 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1169 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1292 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1269 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1247 usec of audio from queue
W: [pulseaudio] module-loopback.c: Too many underruns, increasing latency to 12,00 ms
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1192 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1237 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1237 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1237 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1237 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1237 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1237 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1281 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1237 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1237 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1237 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1237 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1237 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1237 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1236 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1237 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1237 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1281 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1237 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1237 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1259 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 1237 usec of audio from queue
I: [null-sink] module-loopback.c: Adding 719 usec of silence to queue
I: [null-sink] module-loopback.c: Adding 1237 usec of silence to queue
I: [null-sink] module-loopback.c: Adding 652 usec of silence to queue
I: [null-sink] module-loopback.c: Adding 1259 usec of silence to queue
I: [null-sink] module-loopback.c: Adding 1237 usec of silence to queue
I: [null-sink] module-loopback.c: Dropping 4047 usec of audio from queue
I: [null-sink] module-loopback.c: Dropping 404 usec of audio from queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [pulseaudio] client.c: Created 14 "Native client (UNIX socket client)"
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] client.c: Created 15 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [null-sink] module-loopback.c: Could not peek into queue
I: [alsa-source-ALC256 Analog] alsa-source.c: Scheduling delay of 3,45 ms > 1,25 ms, you might want to investigate this to improve latency...
I: [alsa-source-ALC256 Analog] alsa-source.c: Overrun!
I: [alsa-source-ALC256 Analog] alsa-source.c: Increasing minimal latency to 1,00 ms
I: [null-sink] module-loopback.c: Could not peek into queue
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] source.c: Cannot update sample spec, SOURCE_IS_RUNNING, will keep using s16le and 44100 Hz
I: [pulseaudio] remap.c: Using stereo to mono remapping
I: [pulseaudio] source-output.c: Created output 3 "Rilevato picco" on alsa_output.pci-0000_03_00.6.analog-stereo.monitor with sample spec float32le ch 1 25 Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Rilevato picco"
I: [pulseaudio] source-output.c:     application.name = "Regolazione del volume PulseAudio"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "34"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "4.0"
I: [pulseaudio] source-output.c:     application.process.id = "2206"
I: [pulseaudio] source-output.c:     application.process.user = "allexj"
I: [pulseaudio] source-output.c:     application.process.host = "Archy"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "it_IT.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
I: [pulseaudio] source-output.c:     application.process.session_id = "2"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [pulseaudio] protocol-native.c: Final latency 80,00 ms = 40,00 ms + 40,00 ms
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] source.c: Cannot update sample spec, SOURCE_IS_RUNNING, will keep using s16le and 44100 Hz
I: [pulseaudio] remap.c: Using stereo to mono remapping
I: [pulseaudio] source-output.c: Created output 4 "Rilevato picco" on alsa_input.pci-0000_03_00.6.analog-stereo with sample spec float32le ch 1 25 Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Rilevato picco"
I: [pulseaudio] source-output.c:     application.name = "Regolazione del volume PulseAudio"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "34"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "4.0"
I: [pulseaudio] source-output.c:     application.process.id = "2206"
I: [pulseaudio] source-output.c:     application.process.user = "allexj"
I: [pulseaudio] source-output.c:     application.process.host = "Archy"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "it_IT.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
I: [pulseaudio] source-output.c:     application.process.session_id = "2"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [pulseaudio] protocol-native.c: Final latency 80,00 ms = 40,00 ms + 40,00 ms
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] source.c: Cannot update sample spec, this is a monitor source and the sink is running.
I: [pulseaudio] remap.c: Using stereo to mono remapping
I: [pulseaudio] source-output.c: Created output 5 "Rilevato picco" on FakeMicrophone.monitor with sample spec float32le ch 1 25 Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Rilevato picco"
I: [pulseaudio] source-output.c:     application.name = "Regolazione del volume PulseAudio"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "34"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "4.0"
I: [pulseaudio] source-output.c:     application.process.id = "2206"
I: [pulseaudio] source-output.c:     application.process.user = "allexj"
I: [pulseaudio] source-output.c:     application.process.host = "Archy"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "it_IT.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
I: [pulseaudio] source-output.c:     application.process.session_id = "2"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [pulseaudio] protocol-native.c: Final latency 80,00 ms = 40,00 ms + 40,00 ms
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] source.c: Cannot update sample spec, SOURCE_IS_RUNNING, will keep using s16le and 44100 Hz
I: [pulseaudio] remap.c: Using stereo to mono remapping
I: [pulseaudio] source-output.c: Created output 6 "Rilevato picco" on FakeMicrophone.monitor with sample spec float32le ch 1 25 Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Rilevato picco"
I: [pulseaudio] source-output.c:     application.name = "Regolazione del volume PulseAudio"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "34"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "4.0"
I: [pulseaudio] source-output.c:     application.process.id = "2206"
I: [pulseaudio] source-output.c:     application.process.user = "allexj"
I: [pulseaudio] source-output.c:     application.process.host = "Archy"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "it_IT.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
I: [pulseaudio] source-output.c:     application.process.session_id = "2"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [pulseaudio] protocol-native.c: Final latency 80,00 ms = 40,00 ms + 40,00 ms
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] source.c: Cannot update sample spec, SOURCE_IS_RUNNING, will keep using s16le and 44100 Hz
I: [pulseaudio] remap.c: Using stereo to mono remapping
I: [pulseaudio] source-output.c: Created output 7 "Rilevato picco" on FakeMicrophone.monitor with sample spec float32le ch 1 25 Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Rilevato picco"
I: [pulseaudio] source-output.c:     application.name = "Regolazione del volume PulseAudio"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "34"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "4.0"
I: [pulseaudio] source-output.c:     application.process.id = "2206"
I: [pulseaudio] source-output.c:     application.process.user = "allexj"
I: [pulseaudio] source-output.c:     application.process.host = "Archy"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "it_IT.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
I: [pulseaudio] source-output.c:     application.process.session_id = "2"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [pulseaudio] protocol-native.c: Final latency 80,00 ms = 40,00 ms + 40,00 ms
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [alsa-source-ALC256 Analog] alsa-source.c: Scheduling delay of 2,44 ms > 1,25 ms, you might want to investigate this to improve latency...
I: [alsa-source-ALC256 Analog] alsa-source.c: Overrun!
I: [alsa-source-ALC256 Analog] alsa-source.c: Increasing minimal latency to 2,00 ms
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [pulseaudio] module-device-restore.c: Synced.
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
I: [null-sink] module-loopback.c: Could not peek into queue
W: [pulseaudio] module-loopback.c: Too many underruns, increasing latency to 17,00 ms
I: [null-sink] module-loopback.c: Could not peek into queue
W: [pulseaudio] module-loopback.c: Too many underruns, increasing latency to 17,00 ms
I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_03_00.6.analog-stereo:analog-output-speaker.
I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_03_00.6.analog-stereo:analog-output-speaker.
I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_03_00.6.analog-stereo:analog-output-speaker.
I: [pulseaudio] client.c: Created 16 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] client.c: Created 17 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] sink-input.c: Trying to change sample spec
I: [pulseaudio] sink.c: Cannot update sample spec, monitor source is RUNNING
I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-media-role:phone.
I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-media-role:phone.
I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
I: [pulseaudio] remap_sse.c: Using SSE2 mono to stereo remapping
I: [pulseaudio] sink-input.c: Created input 5 "Output" on alsa_output.pci-0000_03_00.6.analog-stereo with sample spec s16le ch 1 44100 Hz and channel map mono
I: [pulseaudio] sink-input.c:     window.icon_name = "skype"
I: [pulseaudio] sink-input.c:     application.icon_name = "skype"
I: [pulseaudio] sink-input.c:     media.role = "phone"
I: [pulseaudio] sink-input.c:     media.name = "Output"
I: [pulseaudio] sink-input.c:     application.name = "Skype"
I: [pulseaudio] sink-input.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] sink-input.c:     native-protocol.version = "34"
I: [pulseaudio] sink-input.c:     application.process.id = "2296"
I: [pulseaudio] sink-input.c:     application.process.user = "allexj"
I: [pulseaudio] sink-input.c:     application.process.host = "Archy"
I: [pulseaudio] sink-input.c:     application.process.binary = "skypeforlinux"
I: [pulseaudio] sink-input.c:     application.language = "it_IT.UTF-8"
I: [pulseaudio] sink-input.c:     window.x11.display = ":0"
I: [pulseaudio] sink-input.c:     application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
I: [pulseaudio] sink-input.c:     application.process.session_id = "2"
I: [pulseaudio] sink-input.c:     module-stream-restore.id = "sink-input-by-media-role:phone"
I: [pulseaudio] protocol-native.c: Requested tlength=60,00 ms, minreq=14,99 ms
I: [pulseaudio] protocol-native.c: Final latency 60,00 ms = 15,01 ms + 2*14,99 ms + 15,01 ms
I: [pulseaudio] sink.c: Cannot update sample spec, monitor source is RUNNING
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] source.c: Cannot update sample spec, SOURCE_IS_RUNNING, will keep using s16le and 44100 Hz
I: [pulseaudio] remap.c: Using stereo to mono remapping
I: [pulseaudio] source-output.c: Created output 8 "Rilevato picco" on alsa_output.pci-0000_03_00.6.analog-stereo.monitor with sample spec float32le ch 1 25 Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Rilevato picco"
I: [pulseaudio] source-output.c:     application.name = "Regolazione del volume PulseAudio"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "34"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "4.0"
I: [pulseaudio] source-output.c:     application.process.id = "2206"
I: [pulseaudio] source-output.c:     application.process.user = "allexj"
I: [pulseaudio] source-output.c:     application.process.host = "Archy"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "it_IT.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
I: [pulseaudio] source-output.c:     application.process.session_id = "2"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [pulseaudio] protocol-native.c: Final latency 80,00 ms = 40,00 ms + 40,00 ms
I: [pulseaudio] client.c: Created 18 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] sink-input.c: Trying to change sample spec
I: [pulseaudio] sink.c: Cannot update sample spec, SINK_IS_RUNNING, will keep using s16le and 44100 Hz
I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
I: [pulseaudio] remap_sse.c: Using SSE2 mono to stereo remapping
I: [pulseaudio] sink-input.c: Created input 6 "Playback" on alsa_output.pci-0000_03_00.6.analog-stereo with sample spec float32le ch 1 44100 Hz and channel map mono
I: [pulseaudio] sink-input.c:     application.icon_name = "chromium-browser"
I: [pulseaudio] sink-input.c:     media.name = "Playback"
I: [pulseaudio] sink-input.c:     application.name = "Chromium"
I: [pulseaudio] sink-input.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] sink-input.c:     native-protocol.version = "34"
I: [pulseaudio] sink-input.c:     application.process.id = "2363"
I: [pulseaudio] sink-input.c:     application.process.user = "allexj"
I: [pulseaudio] sink-input.c:     application.process.host = "Archy"
I: [pulseaudio] sink-input.c:     application.process.binary = "skypeforlinux"
I: [pulseaudio] sink-input.c:     application.language = "it_IT.UTF-8"
I: [pulseaudio] sink-input.c:     window.x11.display = ":0"
I: [pulseaudio] sink-input.c:     application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
I: [pulseaudio] sink-input.c:     application.process.session_id = "2"
I: [pulseaudio] sink-input.c:     module-stream-restore.id = "sink-input-by-application-name:Chromium"
I: [pulseaudio] protocol-native.c: Requested tlength=69,66 ms, minreq=11,61 ms
I: [pulseaudio] protocol-native.c: Final latency 69,66 ms = 23,22 ms + 2*11,61 ms + 23,22 ms
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] source.c: Cannot update sample spec, SOURCE_IS_RUNNING, will keep using s16le and 44100 Hz
I: [pulseaudio] remap.c: Using stereo to mono remapping
I: [pulseaudio] source-output.c: Created output 9 "Rilevato picco" on alsa_output.pci-0000_03_00.6.analog-stereo.monitor with sample spec float32le ch 1 25 Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Rilevato picco"
I: [pulseaudio] source-output.c:     application.name = "Regolazione del volume PulseAudio"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "34"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "4.0"
I: [pulseaudio] source-output.c:     application.process.id = "2206"
I: [pulseaudio] source-output.c:     application.process.user = "allexj"
I: [pulseaudio] source-output.c:     application.process.host = "Archy"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "it_IT.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
I: [pulseaudio] source-output.c:     application.process.session_id = "2"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [pulseaudio] protocol-native.c: Final latency 80,00 ms = 40,00 ms + 40,00 ms
I: [pulseaudio] client.c: Created 19 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] sink-input.c: Trying to change sample spec
I: [pulseaudio] sink.c: Cannot update sample spec, SINK_IS_RUNNING, will keep using s16le and 44100 Hz
I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
I: [pulseaudio] sink-input.c: Created input 7 "Playback" on alsa_output.pci-0000_03_00.6.analog-stereo with sample spec float32le ch 2 44100 Hz and channel map front-left,front-right
I: [pulseaudio] sink-input.c:     application.icon_name = "chromium-browser"
I: [pulseaudio] sink-input.c:     media.name = "Playback"
I: [pulseaudio] sink-input.c:     application.name = "Chromium"
I: [pulseaudio] sink-input.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] sink-input.c:     native-protocol.version = "34"
I: [pulseaudio] sink-input.c:     application.process.id = "2363"
I: [pulseaudio] sink-input.c:     application.process.user = "allexj"
I: [pulseaudio] sink-input.c:     application.process.host = "Archy"
I: [pulseaudio] sink-input.c:     application.process.binary = "skypeforlinux"
I: [pulseaudio] sink-input.c:     application.language = "it_IT.UTF-8"
I: [pulseaudio] sink-input.c:     window.x11.display = ":0"
I: [pulseaudio] sink-input.c:     application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
I: [pulseaudio] sink-input.c:     application.process.session_id = "2"
I: [pulseaudio] sink-input.c:     module-stream-restore.id = "sink-input-by-application-name:Chromium"
I: [pulseaudio] protocol-native.c: Requested tlength=69,66 ms, minreq=11,61 ms
I: [pulseaudio] protocol-native.c: Final latency 69,66 ms = 23,22 ms + 2*11,61 ms + 23,22 ms
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] source.c: Cannot update sample spec, SOURCE_IS_RUNNING, will keep using s16le and 44100 Hz
I: [pulseaudio] remap.c: Using stereo to mono remapping
I: [pulseaudio] source-output.c: Created output 10 "Rilevato picco" on alsa_output.pci-0000_03_00.6.analog-stereo.monitor with sample spec float32le ch 1 25 Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Rilevato picco"
I: [pulseaudio] source-output.c:     application.name = "Regolazione del volume PulseAudio"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "34"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "4.0"
I: [pulseaudio] source-output.c:     application.process.id = "2206"
I: [pulseaudio] source-output.c:     application.process.user = "allexj"
I: [pulseaudio] source-output.c:     application.process.host = "Archy"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "it_IT.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
I: [pulseaudio] source-output.c:     application.process.session_id = "2"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [pulseaudio] protocol-native.c: Final latency 80,00 ms = 40,00 ms + 40,00 ms
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] source.c: Cannot update sample spec, SOURCE_IS_RUNNING, will keep using s16le and 44100 Hz
I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
I: [pulseaudio] remap.c: Using stereo to mono remapping
I: [pulseaudio] source-output.c: Created output 11 "Input" on alsa_input.pci-0000_03_00.6.analog-stereo with sample spec s16le ch 1 44100 Hz and channel map mono
I: [pulseaudio] source-output.c:     window.icon_name = "skype"
I: [pulseaudio] source-output.c:     application.icon_name = "skype"
I: [pulseaudio] source-output.c:     media.role = "phone"
I: [pulseaudio] source-output.c:     media.name = "Input"
I: [pulseaudio] source-output.c:     application.name = "Skype"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "34"
I: [pulseaudio] source-output.c:     application.process.id = "2296"
I: [pulseaudio] source-output.c:     application.process.user = "allexj"
I: [pulseaudio] source-output.c:     application.process.host = "Archy"
I: [pulseaudio] source-output.c:     application.process.binary = "skypeforlinux"
I: [pulseaudio] source-output.c:     application.language = "it_IT.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
I: [pulseaudio] source-output.c:     application.process.session_id = "2"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-media-role:phone"
I: [pulseaudio] protocol-native.c: Final latency 20,00 ms = 10,00 ms + 10,00 ms
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] source.c: Cannot update sample spec, SOURCE_IS_RUNNING, will keep using s16le and 44100 Hz
I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream source-output-by-media-role:phone.
I: [pulseaudio] module-device-restore.c: Synced.
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] source.c: Cannot update sample spec, SOURCE_IS_RUNNING, will keep using s16le and 44100 Hz
I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream source-output-by-media-role:phone.
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] source.c: Cannot update sample spec, SOURCE_IS_RUNNING, will keep using s16le and 44100 Hz
I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream source-output-by-media-role:phone.
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] source.c: Cannot update sample spec, SOURCE_IS_RUNNING, will keep using s16le and 44100 Hz
I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream source-output-by-media-role:phone.
I: [pulseaudio] module-stream-restore.c: Synced.
I: [pulseaudio] source-output.c: Freeing output 11 "Input"
I: [pulseaudio] source-output.c: Freeing output 8 "Rilevato picco"
I: [pulseaudio] sink-input.c: Freeing input 5 "Output"
I: [pulseaudio] client.c: Freed 17 "Skype"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] source-output.c: Freeing output 10 "Rilevato picco"
I: [pulseaudio] sink-input.c: Freeing input 7 "Playback"
I: [pulseaudio] client.c: Freed 19 "Chromium"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] source-output.c: Freeing output 9 "Rilevato picco"
I: [pulseaudio] sink-input.c: Freeing input 6 "Playback"
I: [pulseaudio] client.c: Freed 18 "Chromium"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Freed 16 "Chromium input"
I: [pulseaudio] protocol-native.c: Connection died.
^CI: [pulseaudio] main.c: Got signal SIGINT.
I: [pulseaudio] main.c: Exiting.
I: [pulseaudio] main.c: Daemon shutdown initiated.
I: [pulseaudio] module.c: Unloading "module-loopback" (index: #26).
I: [pulseaudio] source-output.c: Freeing output 2 "Loopback to FakeMicrophone"
I: [pulseaudio] source-output.c: Freeing output 7 "Rilevato picco"
I: [pulseaudio] sink-input.c: Freeing input 4 "Loopback from Monitor of Family 17h (Models 10h-1fh) HD Audio Controller Stereo analogico"
I: [pulseaudio] module.c: Unloaded "module-loopback" (index: #26).
I: [pulseaudio] module.c: Unloading "module-loopback" (index: #25).
I: [pulseaudio] source-output.c: Freeing output 1 "Loopback to FakeMicrophone"
I: [pulseaudio] source-output.c: Freeing output 6 "Rilevato picco"
I: [pulseaudio] sink-input.c: Freeing input 3 "Loopback from Family 17h (Models 10h-1fh) HD Audio Controller Stereo analogico"
I: [pulseaudio] module.c: Unloaded "module-loopback" (index: #25).
I: [pulseaudio] module.c: Unloading "module-null-sink" (index: #24).
I: [pulseaudio] source-output.c: Freeing output 5 "Rilevato picco"
I: [pulseaudio] sink.c: Freeing sink 1 "FakeMicrophone"
I: [pulseaudio] source.c: Freeing source 2 "FakeMicrophone.monitor"
I: [pulseaudio] module.c: Unloaded "module-null-sink" (index: #24).
I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #23).
I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #23).
I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #22).
I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #22).
I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #21).
I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #21).
I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #20).
I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #20).
I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #19).
I: [pulseaudio] client.c: Freed 0 "Login Session 2"
I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #19).
I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #18).
I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #18).
I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #17).
I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #17).
I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #16).
I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #16).
I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #15).
I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #15).
I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #14).
I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #14).
I: [pulseaudio] module.c: Unloading "module-gsettings" (index: #13).
I: [pulseaudio] module.c: Unloaded "module-gsettings" (index: #13).
I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #12).
I: [pulseaudio] client.c: Freed 1 "Plasma PA"
I: [pulseaudio] client.c: Freed 2 "KMix"
I: [pulseaudio] client.c: Freed 3 "Plasma PA"
I: [pulseaudio] client.c: Freed 4 "KMix"
I: [pulseaudio] source-output.c: Freeing output 3 "Rilevato picco"
I: [pulseaudio] source-output.c: Freeing output 4 "Rilevato picco"
I: [pulseaudio] client.c: Freed 14 "Regolazione del volume PulseAudio"
I: [pulseaudio] client.c: Freed 15 "PulseAudio Volume Control"
I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #12).
I: [pulseaudio] module.c: Unloading "module-dbus-protocol" (index: #11).
I: [pulseaudio] module.c: Unloaded "module-dbus-protocol" (index: #11).
I: [pulseaudio] module.c: Unloading "module-bluez5-discover" (index: #10).
I: [pulseaudio] module.c: Unloaded "module-bluez5-discover" (index: #10).
I: [pulseaudio] module.c: Unloading "module-bluetooth-discover" (index: #9).
I: [pulseaudio] module.c: Unloaded "module-bluetooth-discover" (index: #9).
I: [pulseaudio] module.c: Unloading "module-bluetooth-policy" (index: #8).
I: [pulseaudio] module.c: Unloaded "module-bluetooth-policy" (index: #8).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #7).
I: [pulseaudio] core.c: default_sink: alsa_output.pci-0000_03_00.6.analog-stereo -> (unset)
I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_03_00.6.analog-stereo"
I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_03_00.6.analog-stereo.monitor"
I: [pulseaudio] core.c: default_source: alsa_input.pci-0000_03_00.6.analog-stereo -> (unset)
I: [pulseaudio] source.c: Freeing source 1 "alsa_input.pci-0000_03_00.6.analog-stereo"
I: [pulseaudio] card.c: Freed 1 "alsa_card.pci-0000_03_00.6"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #7).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_03_00.1"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
I: [pulseaudio] main.c: Daemon terminated.

Last edited by Allexj (2021-04-27 16:54:44)

Flemur · 2021-04-27 13:16:21

Allexj wrote:

I have an issue with Pulseaudio. Basically to be able to share my internal system audio to people, I created a monitor fake microphone that has both my real microphone and the internal audio.

What does "share" mean? If it means recording the audio, mic + other stuff, can't you do that just by selecting the "Monitor of Built-in..." for recording?

FWIW, in /etc/pulse/default.pa, I have

set-default-source alsa_output.pci-0000_00_0e.0.analog-stereo.monitor

so I just start the recorder when I need to record something, and don't need to mess with pavucontrol.

Edit: you might try renaming or deleting ~/.config/pulse

Last edited by Flemur (2021-04-27 13:18:08)

V1del · 2021-04-27 13:31:59

1ms is a tight target anyway you probably want to set that higher, I'd also suggest clearing the local config if you look for a quick fix, but maybe post a

pacmd list-sinks
pacmd list-sink-inputs
pacmd list-sources
pacmd list-source-outputs

first so we can check what the general setup is like.

Allexj · 2021-04-27 13:40:26

Flemur wrote:

Allexj wrote:
I have an issue with Pulseaudio. Basically to be able to share my internal system audio to people, I created a monitor fake microphone that has both my real microphone and the internal audio.
What does "share" mean? If it means recording the audio, mic + other stuff, can't you do that just by selecting the "Monitor of Built-in..." for recording?

Yeah, but I can't record both internal audio and microphone. I only can record internal audio. The fake microphone method allowed me to record both microphone and internal audio, so people in Skype for example can hear both.

Flemur wrote:

Edit: you might try renaming or deleting ~/.config/pulse

I'll try it

V1del wrote:

1ms is a tight target anyway you probably want to set that higher, I'd also suggest clearing the local config if you look for a quick fix, but maybe post a
pacmd list-sinks
pacmd list-sink-inputs
pacmd list-sources
pacmd list-source-outputs
first so we can check what the general setup is like.

ok, thanks.

$ pacmd list-sink-inputs
2 sink input(s) available.
    index: 16
        driver: <protocol-native.c>
        flags: START_CORKED 
        state: CORKED
        sink: 0 <alsa_output.pci-0000_03_00.6.analog-stereo>
        volume: mono: 65536 / 100% / 0,00 dB
                balance 0,00
        muted: no
        current latency: 42,06 ms
        requested latency: 15,01 ms
        sample spec: s16le ch 1 44100 Hz
        channel map: mono
                     Mono
        resample method: copy
        module: 12
        client: 14 <Skype>
        properties:
                window.icon_name = "skype"
                application.icon_name = "skype"
                media.role = "phone"
                media.name = "Output"
                application.name = "Skype"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "34"
                application.process.id = "1177"
                application.process.user = "allexj"
                application.process.host = "Archy"
                application.process.binary = "skypeforlinux"
                application.language = "it_IT.UTF-8"
                window.x11.display = ":0"
                application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
                application.process.session_id = "2"
                module-stream-restore.id = "sink-input-by-media-role:phone"
    index: 26
        driver: <protocol-native.c>
        flags: START_CORKED 
        state: CORKED
        sink: 0 <alsa_output.pci-0000_03_00.6.analog-stereo>
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        muted: no
        current latency: 112,52 ms
        requested latency: 75,00 ms
        sample spec: float32le ch 2 48000 Hz
        channel map: front-left,front-right
                     Stereo
        resample method: speex-float-1
        module: 12
        client: 32 <Firefox>
        properties:
                media.name = "AudioStream"
                application.name = "Firefox"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "34"
                application.process.id = "1423"
                application.process.user = "allexj"
                application.process.host = "Archy"
                application.process.binary = "firefox"
                application.language = "it_IT.UTF-8"
                window.x11.display = ":0"
                application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
                application.process.session_id = "2"
                application.icon_name = "firefox"
                module-stream-restore.id = "sink-input-by-application-name:Firefox"

$ pacmd list-sources
2 source(s) available.
    index: 0
        name: <alsa_output.pci-0000_03_00.6.analog-stereo.monitor>
        driver: <module-alsa-card.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause: (none)
        priority: 1030
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        base volume: 65536 / 100% / 0,00 dB
        volume steps: 65537
        muted: no
        current latency: 0,00 ms
        max rewind: 2 KiB
        sample spec: s16le ch 2 44100 Hz
        channel map: front-left,front-right
                     Stereo
        used by: 3
        linked by: 3
        configured latency: 40,00 ms; range is 2,00 .. 1999,82 ms
        monitor_of: 0
        card: 1 <alsa_card.pci-0000_03_00.6>
        module: 7
        properties:
                device.description = "Monitor of Family 17h (Models 10h-1fh) HD Audio Controller Stereo analogico"
                device.class = "monitor"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xc05c0000 irq 71"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:03:00.6"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "15e3"
                device.product.name = "Family 17h (Models 10h-1fh) HD Audio Controller"
                device.string = "1"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
  * index: 1
        name: <alsa_input.pci-0000_03_00.6.analog-stereo>
        driver: <module-alsa-card.c>
        flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause: (none)
        priority: 9039
        volume: front-left: 19588 /  30% / -31,47 dB,   front-right: 19588 /  30% / -31,47 dB
                balance 0,00
        base volume: 6554 /  10% / -60,00 dB
        volume steps: 65537
        muted: no
        current latency: 1,98 ms
        max rewind: 0 KiB
        sample spec: s16le ch 2 44100 Hz
        channel map: front-left,front-right
                     Stereo
        used by: 1
        linked by: 2
        configured latency: 16,00 ms; range is 16,00 .. 1999,82 ms
        card: 1 <alsa_card.pci-0000_03_00.6>
        module: 7
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC256 Analog"
                alsa.id = "ALC256 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xc05c0000 irq 71"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:03:00.6"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "15e3"
                device.product.name = "Family 17h (Models 10h-1fh) HD Audio Controller"
                device.string = "front:1"
                device.buffering.buffer_size = "352768"
                device.buffering.fragment_size = "176384"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Stereo analogico"
                device.description = "Family 17h (Models 10h-1fh) HD Audio Controller Stereo analogico"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        ports:
                analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-input-microphone"
        active port: <analog-input-mic>

$ pacmd list-source-outputs
5 source output(s) available.
    index: 2
        driver: <protocol-native.c>
        flags: START_CORKED 
        state: CORKED
        source: 1 <alsa_input.pci-0000_03_00.6.analog-stereo>
        volume: mono: 65536 / 100% / 0,00 dB
                balance 0,00
        muted: no
        current latency: 0,00 ms
        requested latency: 16,00 ms
        sample spec: s16le ch 1 44100 Hz
        channel map: mono
                     Mono
        resample method: copy
        owner module: 12
        client: 14 <Skype>
        properties:
                window.icon_name = "skype"
                application.icon_name = "skype"
                media.role = "phone"
                media.name = "Input"
                application.name = "Skype"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "34"
                application.process.id = "1177"
                application.process.user = "allexj"
                application.process.host = "Archy"
                application.process.binary = "skypeforlinux"
                application.language = "it_IT.UTF-8"
                window.x11.display = ":0"
                application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
                application.process.session_id = "2"
                module-stream-restore.id = "source-output-by-media-role:phone"
    index: 3
        driver: <protocol-native.c>
        flags: DONT_MOVE 
        state: RUNNING
        source: 0 <alsa_output.pci-0000_03_00.6.analog-stereo.monitor>
        volume: mono: 65536 / 100% / 0,00 dB
                balance 0,00
        muted: no
        current latency: 3,88 ms
        requested latency: 40,00 ms
        sample spec: float32le ch 1 25 Hz
        channel map: mono
                     Mono
        resample method: peaks
        owner module: 12
        client: 21 <Regolazione del volume PulseAudio>
        properties:
                media.name = "Rilevato picco"
                application.name = "Regolazione del volume PulseAudio"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "34"
                application.id = "org.PulseAudio.pavucontrol"
                application.icon_name = "audio-card"
                application.version = "4.0"
                application.process.id = "1359"
                application.process.user = "allexj"
                application.process.host = "Archy"
                application.process.binary = "pavucontrol"
                application.language = "it_IT.UTF-8"
                window.x11.display = ":0"
                application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
                application.process.session_id = "2"
                module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
    index: 4
        driver: <protocol-native.c>
        flags: DONT_MOVE 
        state: RUNNING
        source: 1 <alsa_input.pci-0000_03_00.6.analog-stereo>
        volume: mono: 65536 / 100% / 0,00 dB
                balance 0,00
        muted: no
        current latency: 0,00 ms
        requested latency: 40,00 ms
        sample spec: float32le ch 1 25 Hz
        channel map: mono
                     Mono
        resample method: peaks
        owner module: 12
        client: 21 <Regolazione del volume PulseAudio>
        properties:
                media.name = "Rilevato picco"
                application.name = "Regolazione del volume PulseAudio"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "34"
                application.id = "org.PulseAudio.pavucontrol"
                application.icon_name = "audio-card"
                application.version = "4.0"
                application.process.id = "1359"
                application.process.user = "allexj"
                application.process.host = "Archy"
                application.process.binary = "pavucontrol"
                application.language = "it_IT.UTF-8"
                window.x11.display = ":0"
                application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
                application.process.session_id = "2"
                module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
    index: 40
        driver: <protocol-native.c>
        flags: DONT_MOVE 
        state: RUNNING
        source: 0 <alsa_output.pci-0000_03_00.6.analog-stereo.monitor>
        volume: mono: 65536 / 100% / 0,00 dB
                balance 0,00
        muted: no
        current latency: 3,90 ms
        requested latency: 40,00 ms
        sample spec: float32le ch 1 25 Hz
        channel map: mono
                     Mono
        resample method: peaks
        owner module: 12
        client: 21 <Regolazione del volume PulseAudio>
        direct on input: 26
        properties:
                media.name = "Rilevato picco"
                application.name = "Regolazione del volume PulseAudio"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "34"
                application.id = "org.PulseAudio.pavucontrol"
                application.icon_name = "audio-card"
                application.version = "4.0"
                application.process.id = "1359"
                application.process.user = "allexj"
                application.process.host = "Archy"
                application.process.binary = "pavucontrol"
                application.language = "it_IT.UTF-8"
                window.x11.display = ":0"
                application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
                application.process.session_id = "2"
                module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
    index: 47
        driver: <protocol-native.c>
        flags: DONT_MOVE 
        state: RUNNING
        source: 0 <alsa_output.pci-0000_03_00.6.analog-stereo.monitor>
        volume: mono: 65536 / 100% / 0,00 dB
                balance 0,00
        muted: no
        current latency: 9,43 ms
        requested latency: 40,00 ms
        sample spec: float32le ch 1 25 Hz
        channel map: mono
                     Mono
        resample method: peaks
        owner module: 12
        client: 21 <Regolazione del volume PulseAudio>
        direct on input: 16
        properties:
                media.name = "Rilevato picco"
                application.name = "Regolazione del volume PulseAudio"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "34"
                application.id = "org.PulseAudio.pavucontrol"
                application.icon_name = "audio-card"
                application.version = "4.0"
                application.process.id = "1359"
                application.process.user = "allexj"
                application.process.host = "Archy"
                application.process.binary = "pavucontrol"
                application.language = "it_IT.UTF-8"
                window.x11.display = ":0"
                application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
                application.process.session_id = "2"
                module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"

UPDATE
Anyway I tried removing .config/pulse but it still doesn't work

Last edited by Allexj (2021-04-27 14:25:21)

Flemur · 2021-04-27 14:45:29

Allexj wrote:

Flemur wrote:
What does "share" mean? If it means recording the audio, mic + other stuff, can't you do that just by selecting the "Monitor of Built-in..." for recording?
Yeah, but I can't record both internal audio and microphone. I only can record internal audio. The fake microphone method allowed me to record both microphone and internal audio, so people in Skype for example can hear both.

I was just fiddling with it and I'm afraid you're right and I was wrong - with internet radio playing, I can record the mic, by itself, from "Built-in Audio...", or record the radio, without mic input, from "Monitor of...".

I really really hate linux audio. Something like this should be dick-simple, like a GUI that says "Record this AND that, mixed together".

V1del · 2021-04-27 15:40:00

Your null/loopback sinks don't appear to be active here (... and you didn't include the list-sinks in the first place).

Allexj · 2021-04-27 15:55:29

V1del wrote:

you didn't include the list-sinks in the first place.

You are right, here it is:

$ pacmd list-sinks
1 sink(s) available.
  * index: 0
        name: <alsa_output.pci-0000_03_00.6.analog-stereo>
        driver: <module-alsa-card.c>
        flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause: (none)
        priority: 9039
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        base volume: 65536 / 100% / 0,00 dB
        volume steps: 65537
        muted: no
        current latency: 14,55 ms
        max request: 2 KiB
        max rewind: 2 KiB
        monitor source: 0
        sample spec: s16le ch 2 44100 Hz
        channel map: front-left,front-right
                     Stereo
        used by: 1
        linked by: 2
        configured latency: 15,01 ms; range is 2,00 .. 1999,82 ms
        card: 1 <alsa_card.pci-0000_03_00.6>
        module: 7
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC256 Analog"
                alsa.id = "ALC256 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xc05c0000 irq 71"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:03:00.6"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "15e3"
                device.product.name = "Family 17h (Models 10h-1fh) HD Audio Controller"
                device.string = "front:1"
                device.buffering.buffer_size = "352768"
                device.buffering.fragment_size = "176384"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Stereo analogico"
                device.description = "Family 17h (Models 10h-1fh) HD Audio Controller Stereo analogico"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        ports:
                analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-speakers"
                analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "audio-headphones"
        active port: <analog-output-speaker>

V1del wrote:

Your null/loopback sinks don't appear to be active here

It doesn't appear because I disabled it since it doesn't work. I only leave it active when I need to share internal audio, if I don't need it I disable it.
Now I'm enabling it with the script that I posted above, here are the outputs:

Here are the outputs with FakeMicrophone active:

$ pacmd list-sinks
2 sink(s) available.
  * index: 0
        name: <alsa_output.pci-0000_03_00.6.analog-stereo>
        driver: <module-alsa-card.c>
        flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause: (none)
        priority: 9039
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        base volume: 65536 / 100% / 0,00 dB
        volume steps: 65537
        muted: no
        current latency: 2,41 ms
        max request: 0 KiB
        max rewind: 0 KiB
        monitor source: 0
        sample spec: s16le ch 2 44100 Hz
        channel map: front-left,front-right
                     Stereo
        used by: 1
        linked by: 3
        configured latency: 2,50 ms; range is 2,00 .. 1999,82 ms
        card: 1 <alsa_card.pci-0000_03_00.6>
        module: 7
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC256 Analog"
                alsa.id = "ALC256 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xc05c0000 irq 71"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:03:00.6"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "15e3"
                device.product.name = "Family 17h (Models 10h-1fh) HD Audio Controller"
                device.string = "front:1"
                device.buffering.buffer_size = "352768"
                device.buffering.fragment_size = "176384"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Stereo analogico"
                device.description = "Family 17h (Models 10h-1fh) HD Audio Controller Stereo analogico"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        ports:
                analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-speakers"
                analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "audio-headphones"
        active port: <analog-output-speaker>
    index: 10
        name: <FakeMicrophone>
        driver: <module-null-sink.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause: (none)
        priority: 1000
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        base volume: 65536 / 100% / 0,00 dB
        volume steps: 65537
        muted: yes
        current latency: 1,52 ms
        max request: 0 KiB
        max rewind: 0 KiB
        monitor source: 11
        sample spec: s16le ch 2 44100 Hz
        channel map: front-left,front-right
                     Stereo
        used by: 2
        linked by: 2
        configured latency: 2,50 ms; range is 0,50 .. 2000,00 ms
        module: 56
        properties:
                device.description = "FakeMicrophone"
                device.class = "abstract"
                device.icon_name = "audio-card"

$ pacmd list-sink-inputs
4 sink input(s) available.
    index: 47
        driver: <protocol-native.c>
        flags: START_CORKED 
        state: RUNNING
        sink: 0 <alsa_output.pci-0000_03_00.6.analog-stereo>
        volume: mono: 65536 / 100% / 0,00 dB
                balance 0,00
        muted: no
        current latency: 31,27 ms
        requested latency: 15,01 ms
        sample spec: s16le ch 1 44100 Hz
        channel map: mono
                     Mono
        resample method: copy
        module: 12
        client: 14 <Skype>
        properties:
                window.icon_name = "skype"
                application.icon_name = "skype"
                media.role = "phone"
                media.name = "Output"
                application.name = "Skype"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "34"
                application.process.id = "1177"
                application.process.user = "allexj"
                application.process.host = "Archy"
                application.process.binary = "skypeforlinux"
                application.language = "it_IT.UTF-8"
                window.x11.display = ":0"
                application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
                application.process.session_id = "2"
                module-stream-restore.id = "sink-input-by-media-role:phone"
    index: 153
        driver: <protocol-native.c>
        flags: START_CORKED 
        state: CORKED
        sink: 0 <alsa_output.pci-0000_03_00.6.analog-stereo>
        volume: mono: 65536 / 100% / 0,00 dB
                balance 0,00
        muted: no
        current latency: 42,77 ms
        requested latency: 15,01 ms
        sample spec: s16le ch 1 44100 Hz
        channel map: mono
                     Mono
        resample method: copy
        module: 12
        client: 163 <Skype>
        properties:
                window.icon_name = "skype"
                application.icon_name = "skype"
                media.role = "phone"
                media.name = "Output"
                application.name = "Skype"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "34"
                application.process.id = "27646"
                application.process.user = "allexj"
                application.process.host = "Archy"
                application.process.binary = "teams"
                application.language = "C"
                window.x11.display = ":0"
                application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
                application.process.session_id = "2"
                module-stream-restore.id = "sink-input-by-media-role:phone"
    index: 235
        driver: <module-loopback.c>
        flags: VARIABLE_RATE START_CORKED 
        state: RUNNING
        sink: 10 <FakeMicrophone>
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        muted: no
        current latency: 0,14 ms
        requested latency: 2,92 ms
        sample spec: s16le ch 2 43954 Hz
        channel map: front-left,front-right
                     Stereo
        resample method: speex-float-1
        module: 57
        properties:
                media.role = "abstract"
                module-stream-restore.id = "sink-input-by-media-role:abstract"
                media.name = "Loopback from Family 17h (Models 10h-1fh) HD Audio Controller Stereo analogico"
                media.icon_name = "audio-card-pci"
    index: 236
        driver: <module-loopback.c>
        flags: VARIABLE_RATE START_CORKED 
        state: RUNNING
        sink: 10 <FakeMicrophone>
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        muted: no
        current latency: 11,16 ms
        requested latency: 2,50 ms
        sample spec: s16le ch 2 44073 Hz
        channel map: front-left,front-right
                     Stereo
        resample method: speex-float-1
        module: 58
        properties:
                media.role = "abstract"
                module-stream-restore.id = "sink-input-by-media-role:abstract"
                media.name = "Loopback from Monitor of Family 17h (Models 10h-1fh) HD Audio Controller Stereo analogico"
                media.icon_name = "audio-card-pci"

$ pacmd list-sources
3 source(s) available.
    index: 0
        name: <alsa_output.pci-0000_03_00.6.analog-stereo.monitor>
        driver: <module-alsa-card.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause: (none)
        priority: 1030
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        base volume: 65536 / 100% / 0,00 dB
        volume steps: 65537
        muted: no
        current latency: 0,00 ms
        max rewind: 0 KiB
        sample spec: s16le ch 2 44100 Hz
        channel map: front-left,front-right
                     Stereo
        used by: 1
        linked by: 1
        configured latency: 2,50 ms; range is 2,00 .. 1999,82 ms
        monitor_of: 0
        card: 1 <alsa_card.pci-0000_03_00.6>
        module: 7
        properties:
                device.description = "Monitor of Family 17h (Models 10h-1fh) HD Audio Controller Stereo analogico"
                device.class = "monitor"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xc05c0000 irq 71"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:03:00.6"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "15e3"
                device.product.name = "Family 17h (Models 10h-1fh) HD Audio Controller"
                device.string = "1"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
  * index: 1
        name: <alsa_input.pci-0000_03_00.6.analog-stereo>
        driver: <module-alsa-card.c>
        flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause: (none)
        priority: 9039
        volume: front-left: 19588 /  30% / -31,47 dB,   front-right: 19588 /  30% / -31,47 dB
                balance 0,00
        base volume: 6554 /  10% / -60,00 dB
        volume steps: 65537
        muted: no
        current latency: 0,77 ms
        max rewind: 0 KiB
        sample spec: s16le ch 2 44100 Hz
        channel map: front-left,front-right
                     Stereo
        used by: 2
        linked by: 3
        configured latency: 16,00 ms; range is 16,00 .. 1999,82 ms
        card: 1 <alsa_card.pci-0000_03_00.6>
        module: 7
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC256 Analog"
                alsa.id = "ALC256 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xc05c0000 irq 71"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:03:00.6"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "15e3"
                device.product.name = "Family 17h (Models 10h-1fh) HD Audio Controller"
                device.string = "front:1"
                device.buffering.buffer_size = "352768"
                device.buffering.fragment_size = "176384"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Stereo analogico"
                device.description = "Family 17h (Models 10h-1fh) HD Audio Controller Stereo analogico"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        ports:
                analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-input-microphone"
        active port: <analog-input-mic>
    index: 11
        name: <FakeMicrophone.monitor>
        driver: <module-null-sink.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: IDLE
        suspend cause: (none)
        priority: 1000
        volume: front-left: 65232 / 100% / -0,12 dB,   front-right: 65232 / 100% / -0,12 dB
                balance 0,00
        base volume: 65536 / 100% / 0,00 dB
        volume steps: 65537
        muted: no
        current latency: 0,00 ms
        max rewind: 0 KiB
        sample spec: s16le ch 2 44100 Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        configured latency: 2000,00 ms; range is 0,50 .. 2000,00 ms
        monitor_of: 10
        module: 56
        properties:
                device.description = "Monitor of FakeMicrophone"
                device.class = "monitor"
                device.icon_name = "audio-input-microphone"

$ pacmd list-source-outputs
4 source output(s) available.
    index: 2
        driver: <protocol-native.c>
        flags: START_CORKED 
        state: RUNNING
        source: 1 <alsa_input.pci-0000_03_00.6.analog-stereo>
        volume: mono: 65536 / 100% / 0,00 dB
                balance 0,00
        muted: no
        current latency: 0,00 ms
        requested latency: 16,00 ms
        sample spec: s16le ch 1 44100 Hz
        channel map: mono
                     Mono
        resample method: copy
        owner module: 12
        client: 14 <Skype>
        properties:
                window.icon_name = "skype"
                application.icon_name = "skype"
                media.role = "phone"
                media.name = "Input"
                application.name = "Skype"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "34"
                application.process.id = "1177"
                application.process.user = "allexj"
                application.process.host = "Archy"
                application.process.binary = "skypeforlinux"
                application.language = "it_IT.UTF-8"
                window.x11.display = ":0"
                application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
                application.process.session_id = "2"
                module-stream-restore.id = "source-output-by-media-role:phone"
    index: 105
        driver: <protocol-native.c>
        flags: START_CORKED 
        state: CORKED
        source: 1 <alsa_input.pci-0000_03_00.6.analog-stereo>
        volume: mono: 65536 / 100% / 0,00 dB
                balance 0,00
        muted: no
        current latency: 0,00 ms
        requested latency: 16,00 ms
        sample spec: s16le ch 1 44100 Hz
        channel map: mono
                     Mono
        resample method: copy
        owner module: 12
        client: 163 <Skype>
        properties:
                window.icon_name = "skype"
                application.icon_name = "skype"
                media.role = "phone"
                media.name = "Input"
                application.name = "Skype"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "34"
                application.process.id = "27646"
                application.process.user = "allexj"
                application.process.host = "Archy"
                application.process.binary = "teams"
                application.language = "C"
                window.x11.display = ":0"
                application.process.machine_id = "90ae5431b97c441fa86b755b5c3f996d"
                application.process.session_id = "2"
                module-stream-restore.id = "source-output-by-media-role:phone"
    index: 106
        driver: <module-loopback.c>
        flags: START_CORKED 
        state: RUNNING
        source: 1 <alsa_input.pci-0000_03_00.6.analog-stereo>
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        muted: no
        current latency: 0,00 ms
        requested latency: 16,00 ms
        sample spec: s16le ch 2 44100 Hz
        channel map: front-left,front-right
                     Stereo
        resample method: (null)
        owner module: 57
        properties:
                media.role = "abstract"
                module-stream-restore.id = "source-output-by-media-role:abstract"
                media.name = "Loopback to FakeMicrophone"
                media.icon_name = "audio-card"
    index: 107
        driver: <module-loopback.c>
        flags: START_CORKED 
        state: RUNNING
        source: 0 <alsa_output.pci-0000_03_00.6.analog-stereo.monitor>
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        muted: no
        current latency: 0,00 ms
        requested latency: 2,50 ms
        sample spec: s16le ch 2 44100 Hz
        channel map: front-left,front-right
                     Stereo
        resample method: (null)
        owner module: 58
        properties:
                media.role = "abstract"
                module-stream-restore.id = "source-output-by-media-role:abstract"
                media.name = "Loopback to FakeMicrophone"
                media.icon_name = "audio-card"

V1del · 2021-04-27 16:04:51

Your null sink is muted

index: 10
        name: <FakeMicrophone>
        driver: <module-null-sink.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause: (none)
        priority: 1000
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        base volume: 65536 / 100% / 0,00 dB
        volume steps: 65537
        muted: yes

pacmd set-sink-mute FakeMicrophone off

Allexj · 2021-04-27 16:20:10

V1del wrote:

Your null sink is muted

index: 10
        name: <FakeMicrophone>
        driver: <module-null-sink.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause: (none)
        priority: 1000
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        base volume: 65536 / 100% / 0,00 dB
        volume steps: 65537
        muted: yes

pacmd set-sink-mute FakeMicrophone off

You are amazing! Thank you so much!!!!!!

V1del · 2021-04-27 16:33:54

Glad to hear, please mark as [SOLVED] by editing the title in your first post (you might have to shorten the title so that it fits).

Arch Linux

#1 2021-04-27 11:27:14

SOLVED-Pulseaudio doesn't let me record internal audio and mic anymore

#2 2021-04-27 13:16:21

Re: SOLVED-Pulseaudio doesn't let me record internal audio and mic anymore

#3 2021-04-27 13:31:59

Re: SOLVED-Pulseaudio doesn't let me record internal audio and mic anymore

#4 2021-04-27 13:40:26

Re: SOLVED-Pulseaudio doesn't let me record internal audio and mic anymore

#5 2021-04-27 14:45:29

Re: SOLVED-Pulseaudio doesn't let me record internal audio and mic anymore

#6 2021-04-27 15:40:00

Re: SOLVED-Pulseaudio doesn't let me record internal audio and mic anymore

#7 2021-04-27 15:55:29

Re: SOLVED-Pulseaudio doesn't let me record internal audio and mic anymore

#8 2021-04-27 16:04:51

Re: SOLVED-Pulseaudio doesn't let me record internal audio and mic anymore

#9 2021-04-27 16:20:10

Re: SOLVED-Pulseaudio doesn't let me record internal audio and mic anymore

#10 2021-04-27 16:33:54

Re: SOLVED-Pulseaudio doesn't let me record internal audio and mic anymore

Board footer