You are not logged in.
- Topics: Active | Unanswered
#1 2021-05-06 01:48:38
- Sachiel
- Member
- Registered: 2007-04-06
- Posts: 16
- Website
[SOLVED] Mini DisplayPort on laptop for external monitor not working
I'm installing Arch into a ThinkPad X1 Carbon (1st Gen) with an Intel HD Graphics 4000. The laptop has a mini DisplayPort, where I have plugged an external monitor using a mini-DP to DP cable. The monitor is detected fine and works when booting this same machine with Windows. I tried both with and without the xfb86-vide-intel driver. This is the output of xrandr (notice how DP1 shows as disconnected):
$ xrandr
Screen 0: minimum 320 x 200, current 1600 x 900, maximum 16384 x 16384
LVDS-1 connected primary 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
1600x900 59.97*+ 59.94 59.95 59.82
1400x900 59.96 59.88
1440x810 60.00 59.97
1368x768 59.88 59.85
1280x800 59.99 59.97 59.81 59.91
1280x720 60.00 59.99 59.86 59.74
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 59.98
800x450 59.95 59.82
640x512 60.02
700x450 59.96 59.88
640x480 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
640x400 59.88 59.98
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32
VGA-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)Output of dmesg:
[ 0.000000] Linux version 5.12.1-arch1-1 (linux@archlinux) (gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Sun, 02 May 2021 12:43:58 +0000
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=714e112b-270c-4b1e-b18a-dc8891b785bb rw loglevel=3 quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000ced4dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ced4e000-0x00000000dae9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000021e600000-0x000000021e7fffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 3443CTO/3443CTO, BIOS G6ETC5WW (2.85 ) 09/04/2019
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.372 MHz processor
[ 0.001258] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001263] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001273] last_pfn = 0x21e600 max_arch_pfn = 0x400000000
[ 0.001452] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002548] last_pfn = 0xced4e max_arch_pfn = 0x400000000
[ 0.002724] found SMP MP-table at [mem 0x000f0100-0x000f010f]
[ 0.002814] check: Scanning 1 areas for low memory corruption
[ 0.003592] RAMDISK: [mem 0x36983000-0x374b8fff]
[ 0.003599] ACPI: Early table checksum verification disabled
[ 0.003603] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[ 0.003610] ACPI: XSDT 0x00000000DAFFE170 0000CC (v01 LENOVO TP-G6 00002850 PTL 00000002)
[ 0.003619] ACPI: FACP 0x00000000DAFE6000 00010C (v05 LENOVO TP-G6 00002850 PTL 00000002)
[ 0.003628] ACPI: DSDT 0x00000000DAFE8000 010174 (v01 LENOVO TP-G6 00002850 INTL 20061109)
[ 0.003634] ACPI: FACS 0x00000000DAF5A000 000040
[ 0.003639] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-G6 00002850 PTL 00000001)
[ 0.003644] ACPI: TCPA 0x00000000DAFFC000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.003650] ACPI: SSDT 0x00000000DAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.003655] ACPI: SSDT 0x00000000DAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.003660] ACPI: SSDT 0x00000000DAFF9000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.003665] ACPI: HPET 0x00000000DAFE4000 000038 (v01 LENOVO TP-G6 00002850 PTL 00000002)
[ 0.003670] ACPI: APIC 0x00000000DAFE3000 000098 (v01 LENOVO TP-G6 00002850 PTL 00000002)
[ 0.003675] ACPI: MCFG 0x00000000DAFE2000 00003C (v01 LENOVO TP-G6 00002850 PTL 00000002)
[ 0.003680] ACPI: ECDT 0x00000000DAFE1000 000052 (v01 LENOVO TP-G6 00002850 PTL 00000002)
[ 0.003686] ACPI: FPDT 0x00000000DAFE0000 000064 (v01 LENOVO TP-G6 00002850 PTL 00000002)
[ 0.003691] ACPI: ASF! 0x00000000DAFE7000 0000A5 (v32 LENOVO TP-G6 00002850 PTL 00000002)
[ 0.003696] ACPI: UEFI 0x00000000DAFDF000 00003E (v01 LENOVO TP-G6 00002850 PTL 00000002)
[ 0.003701] ACPI: UEFI 0x00000000DAFDE000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.003707] ACPI: POAT 0x00000000DAFDD000 000055 (v03 LENOVO TP-G6 00002850 PTL 00000002)
[ 0.003712] ACPI: SSDT 0x00000000DAFDC000 000C9E (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.003717] ACPI: SSDT 0x00000000DAFDB000 000A83 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.003722] ACPI: DMAR 0x00000000DAFDA000 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.003727] ACPI: UEFI 0x00000000DAFD9000 000292 (v01 LENOVO TP-G6 00002850 PTL 00000002)
[ 0.003732] ACPI: SSDT 0x00000000DAFD8000 000379 (v01 LENOVO AoacTabl 00001000 INTL 20061109)
[ 0.003737] ACPI: DBG2 0x00000000DAFD7000 0000B4 (v00 LENOVO TP-G6 00002850 PTL 00000002)
[ 0.003741] ACPI: Reserving FACP table memory at [mem 0xdafe6000-0xdafe610b]
[ 0.003743] ACPI: Reserving DSDT table memory at [mem 0xdafe8000-0xdaff8173]
[ 0.003745] ACPI: Reserving FACS table memory at [mem 0xdaf5a000-0xdaf5a03f]
[ 0.003746] ACPI: Reserving SLIC table memory at [mem 0xdaffd000-0xdaffd175]
[ 0.003748] ACPI: Reserving TCPA table memory at [mem 0xdaffc000-0xdaffc031]
[ 0.003749] ACPI: Reserving SSDT table memory at [mem 0xdaffb000-0xdaffb407]
[ 0.003751] ACPI: Reserving SSDT table memory at [mem 0xdaffa000-0xdaffa032]
[ 0.003752] ACPI: Reserving SSDT table memory at [mem 0xdaff9000-0xdaff9796]
[ 0.003754] ACPI: Reserving HPET table memory at [mem 0xdafe4000-0xdafe4037]
[ 0.003755] ACPI: Reserving APIC table memory at [mem 0xdafe3000-0xdafe3097]
[ 0.003757] ACPI: Reserving MCFG table memory at [mem 0xdafe2000-0xdafe203b]
[ 0.003758] ACPI: Reserving ECDT table memory at [mem 0xdafe1000-0xdafe1051]
[ 0.003760] ACPI: Reserving FPDT table memory at [mem 0xdafe0000-0xdafe0063]
[ 0.003761] ACPI: Reserving ASF! table memory at [mem 0xdafe7000-0xdafe70a4]
[ 0.003763] ACPI: Reserving UEFI table memory at [mem 0xdafdf000-0xdafdf03d]
[ 0.003764] ACPI: Reserving UEFI table memory at [mem 0xdafde000-0xdafde041]
[ 0.003766] ACPI: Reserving POAT table memory at [mem 0xdafdd000-0xdafdd054]
[ 0.003767] ACPI: Reserving SSDT table memory at [mem 0xdafdc000-0xdafdcc9d]
[ 0.003769] ACPI: Reserving SSDT table memory at [mem 0xdafdb000-0xdafdba82]
[ 0.003770] ACPI: Reserving DMAR table memory at [mem 0xdafda000-0xdafda0b7]
[ 0.003772] ACPI: Reserving UEFI table memory at [mem 0xdafd9000-0xdafd9291]
[ 0.003774] ACPI: Reserving SSDT table memory at [mem 0xdafd8000-0xdafd8378]
[ 0.003775] ACPI: Reserving DBG2 table memory at [mem 0xdafd7000-0xdafd70b3]
[ 0.003788] ACPI: Local APIC address 0xfee00000
[ 0.003843] No NUMA configuration found
[ 0.003845] Faking a node at [mem 0x0000000000000000-0x000000021e5fffff]
[ 0.003851] NODE_DATA(0) allocated [mem 0x21e5f9000-0x21e5fcfff]
[ 0.003890] Zone ranges:
[ 0.003891] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.003894] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.003897] Normal [mem 0x0000000100000000-0x000000021e5fffff]
[ 0.003899] Device empty
[ 0.003901] Movable zone start for each node
[ 0.003902] Early memory node ranges
[ 0.003903] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.003906] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.003907] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.003909] node 0: [mem 0x0000000040005000-0x00000000ced4dfff]
[ 0.003911] node 0: [mem 0x0000000100000000-0x000000021e5fffff]
[ 0.003913] Initmem setup node 0 [mem 0x0000000000001000-0x000000021e5fffff]
[ 0.003916] On node 0 totalpages: 2019561
[ 0.003918] DMA zone: 64 pages used for memmap
[ 0.003919] DMA zone: 21 pages reserved
[ 0.003921] DMA zone: 3996 pages, LIFO batch:0
[ 0.004296] DMA zone: 28772 pages in unavailable ranges
[ 0.004298] DMA32 zone: 13166 pages used for memmap
[ 0.004299] DMA32 zone: 842573 pages, LIFO batch:63
[ 0.011379] DMA32 zone: 5299 pages in unavailable ranges
[ 0.011384] Normal zone: 18328 pages used for memmap
[ 0.011386] Normal zone: 1172992 pages, LIFO batch:63
[ 0.021319] Normal zone: 6656 pages in unavailable ranges
[ 0.021332] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
[ 0.021669] ACPI: PM-Timer IO Port: 0x408
[ 0.021673] ACPI: Local APIC address 0xfee00000
[ 0.021682] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.021685] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.021697] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.021702] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.021705] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.021708] ACPI: IRQ0 used by override.
[ 0.021710] ACPI: IRQ9 used by override.
[ 0.021713] Using ACPI (MADT) for SMP configuration information
[ 0.021715] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.021721] TSC deadline timer available
[ 0.021723] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.021754] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.021758] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.021759] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.021761] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.021762] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.021765] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.021768] PM: hibernation: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.021771] PM: hibernation: Registered nosave memory: [mem 0xced4e000-0xdae9efff]
[ 0.021772] PM: hibernation: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
[ 0.021773] PM: hibernation: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[ 0.021775] PM: hibernation: Registered nosave memory: [mem 0xdafff000-0xdf9fffff]
[ 0.021776] PM: hibernation: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.021777] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.021779] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.021780] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.021781] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.021782] PM: hibernation: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.021784] PM: hibernation: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.021785] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.021786] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.021788] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.021789] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.021790] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.021792] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.021793] PM: hibernation: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.021795] [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.021798] Booting paravirtualized kernel on bare hardware
[ 0.021800] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.028728] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.029036] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
[ 0.029046] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
[ 0.029050] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.029085] Built 1 zonelists, mobility grouping on. Total pages: 1987982
[ 0.029087] Policy zone: Normal
[ 0.029089] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=714e112b-270c-4b1e-b18a-dc8891b785bb rw loglevel=3 quiet
[ 0.029763] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.030048] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.030321] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[ 0.060178] Memory: 7818080K/8078244K available (14344K kernel code, 2040K rwdata, 8988K rodata, 1652K init, 4348K bss, 259904K reserved, 0K cma-reserved)
[ 0.060189] random: get_random_u64 called from __kmem_cache_create+0x22/0x530 with crng_init=0
[ 0.060345] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.060361] Kernel/User page tables isolation: enabled
[ 0.060383] ftrace: allocating 41952 entries in 164 pages
[ 0.080502] ftrace: allocated 164 pages with 3 groups
[ 0.080646] rcu: Preemptible hierarchical RCU implementation.
[ 0.080649] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.080650] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.080651] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.080653] Trampoline variant of Tasks RCU enabled.
[ 0.080654] Rude variant of Tasks RCU enabled.
[ 0.080655] Tracing variant of Tasks RCU enabled.
[ 0.080656] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.080657] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.086330] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[ 0.086689] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.086755] Console: colour dummy device 80x25
[ 0.086776] printk: console [tty0] enabled
[ 0.086800] ACPI: Core revision 20210105
[ 0.087037] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.087058] APIC: Switch to symmetric I/O mode setup
[ 0.087060] DMAR: Host address width 36
[ 0.087062] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.087068] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.087072] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.087076] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.087078] DMAR: RMRR base: 0x000000da3ba000 end: 0x000000da3d0fff
[ 0.087081] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.087083] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.087085] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.087087] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.087601] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.087604] x2apic enabled
[ 0.087613] Switched APIC routing to cluster x2apic.
[ 0.088118] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.103728] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f4752196d, max_idle_ns: 440795212740 ns
[ 0.103736] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.60 BogoMIPS (lpj=8314573)
[ 0.103740] pid_max: default: 32768 minimum: 301
[ 0.103774] LSM: Security Framework initializing
[ 0.103781] Yama: becoming mindful.
[ 0.103790] LSM support for eBPF active
[ 0.103823] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.103843] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.104174] CPU0: Thermal monitoring enabled (TM1)
[ 0.104198] process: using mwait in idle threads
[ 0.104201] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.104203] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.104207] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.104210] Spectre V2 : Mitigation: Full generic retpoline
[ 0.104211] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.104212] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.104214] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.104215] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.104217] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.104221] SRBDS: Vulnerable: No microcode
[ 0.104222] MDS: Mitigation: Clear CPU buffers
[ 0.104486] Freeing SMP alternatives memory: 36K
[ 0.107041] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1228
[ 0.107054] smpboot: CPU0: Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.107066] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.107066] ... version: 3
[ 0.107066] ... bit width: 48
[ 0.107066] ... generic registers: 4
[ 0.107066] ... value mask: 0000ffffffffffff
[ 0.107066] ... max period: 00007fffffffffff
[ 0.107066] ... fixed-purpose events: 3
[ 0.107066] ... event mask: 000000070000000f
[ 0.107066] rcu: Hierarchical SRCU implementation.
[ 0.107066] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.107066] smp: Bringing up secondary CPUs ...
[ 0.107066] x86: Booting SMP configuration:
[ 0.107066] .... node #0, CPUs: #1
[ 0.109269] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.109269] #2 #3
[ 0.116769] smp: Brought up 1 node, 4 CPUs
[ 0.116769] smpboot: Max logical packages: 2
[ 0.116769] smpboot: Total of 4 processors activated (19962.43 BogoMIPS)
[ 0.117367] devtmpfs: initialized
[ 0.117367] x86/mm: Memory block size: 128MB
[ 0.117873] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
[ 0.117873] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.117873] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.117873] pinctrl core: initialized pinctrl subsystem
[ 0.117873] PM: RTC time: 01:28:05, date: 2021-05-06
[ 0.117873] NET: Registered protocol family 16
[ 0.117873] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.117873] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.117951] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.117967] audit: initializing netlink subsys (disabled)
[ 0.117982] audit: type=2000 audit(1620264485.029:1): state=initialized audit_enabled=0 res=1
[ 0.117982] thermal_sys: Registered thermal governor 'fair_share'
[ 0.117982] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.117982] thermal_sys: Registered thermal governor 'step_wise'
[ 0.117982] thermal_sys: Registered thermal governor 'user_space'
[ 0.117982] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.117982] cpuidle: using governor ladder
[ 0.117982] cpuidle: using governor menu
[ 0.117982] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.117982] ACPI: bus type PCI registered
[ 0.117982] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.117982] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.117982] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.117982] PCI: Using configuration type 1 for base access
[ 0.117982] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.117982] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.121537] Kprobes globally optimized
[ 0.121544] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.121544] ACPI: Added _OSI(Module Device)
[ 0.121544] ACPI: Added _OSI(Processor Device)
[ 0.121544] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.121544] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.121544] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.121544] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.121544] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.141643] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.142431] ACPI: EC: EC started
[ 0.142432] ACPI: EC: interrupt blocked
[ 0.143295] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.143297] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.143675] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.148484] ACPI: Dynamic OEM Table Load:
[ 0.148499] ACPI: SSDT 0xFFFF8A4380B9F000 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.149741] ACPI: Dynamic OEM Table Load:
[ 0.149751] ACPI: SSDT 0xFFFF8A4380BA1C00 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.150686] ACPI: Dynamic OEM Table Load:
[ 0.150694] ACPI: SSDT 0xFFFF8A4380DCC000 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.152626] ACPI: Interpreter enabled
[ 0.152654] ACPI: (supports S0 S3 S4 S5)
[ 0.152656] ACPI: Using IOAPIC for interrupt routing
[ 0.152688] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.153175] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.158312] ACPI: PM: Power Resource [PUBS] (on)
[ 0.158501] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.159700] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[ 0.163547] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.163733] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.163953] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.164136] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.164279] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.164461] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.164642] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.164820] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.165093] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.165101] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.165349] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR DPC]
[ 0.165463] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.165467] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.165469] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.165471] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_SUPPORT)
[ 0.165737] PCI host bridge to bus 0000:00
[ 0.165740] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.165743] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.165745] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.165748] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[ 0.165750] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[ 0.165752] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.165770] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.165881] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.165892] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.165900] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.165906] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.166049] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.166070] pci 0000:00:14.0: reg 0x10: [mem 0xf1500000-0xf150ffff 64bit]
[ 0.166153] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.166274] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.166297] pci 0000:00:16.0: reg 0x10: [mem 0xf1515000-0xf151500f 64bit]
[ 0.166383] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.166486] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.166504] pci 0000:00:1a.0: reg 0x10: [mem 0xf151a000-0xf151a3ff]
[ 0.166599] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.166719] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.166739] pci 0000:00:1b.0: reg 0x10: [mem 0xf1510000-0xf1513fff 64bit]
[ 0.166833] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.166958] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.167120] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.167271] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.167427] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.167592] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.167611] pci 0000:00:1d.0: reg 0x10: [mem 0xf1519000-0xf15193ff]
[ 0.167707] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.167822] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
[ 0.168039] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.168055] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
[ 0.168064] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
[ 0.168073] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
[ 0.168082] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
[ 0.168091] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
[ 0.168100] pci 0000:00:1f.2: reg 0x24: [mem 0xf1518000-0xf15187ff]
[ 0.168149] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.168252] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.168272] pci 0000:00:1f.3: reg 0x10: [mem 0xf1514000-0xf15140ff 64bit]
[ 0.168295] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.168571] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.168576] pci 0000:02:00.0: [1180:e822] type 00 class 0x088001
[ 0.168614] pci 0000:02:00.0: reg 0x10: [mem 0xf0d00000-0xf0d000ff]
[ 0.168891] pci 0000:02:00.0: supports D1 D2
[ 0.168893] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.169274] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.169281] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.169286] pci 0000:00:1c.0: bridge window [mem 0xf0d00000-0xf14fffff]
[ 0.169295] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.170403] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[ 0.170403] pci 0000:03:00.0: reg 0x10: [mem 0xf0c00000-0xf0c01fff 64bit]
[ 0.170631] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.171122] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.171132] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf0cfffff]
[ 0.172648] ACPI: EC: interrupt unblocked
[ 0.172650] ACPI: EC: event unblocked
[ 0.172657] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.172658] ACPI: EC: GPE=0x11
[ 0.172660] ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete
[ 0.172663] ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events
[ 0.172741] iommu: Default domain type: Translated
[ 0.172764] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.172764] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.172764] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.172764] vgaarb: loaded
[ 0.172764] SCSI subsystem initialized
[ 0.173754] libata version 3.00 loaded.
[ 0.173759] ACPI: bus type USB registered
[ 0.173781] usbcore: registered new interface driver usbfs
[ 0.173791] usbcore: registered new interface driver hub
[ 0.173801] usbcore: registered new device driver usb
[ 0.173830] pps_core: LinuxPPS API ver. 1 registered
[ 0.173832] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.173835] PTP clock support registered
[ 0.173846] EDAC MC: Ver: 3.0.0
[ 0.174090] NetLabel: Initializing
[ 0.174090] NetLabel: domain hash size = 128
[ 0.174090] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.174090] NetLabel: unlabeled traffic allowed by default
[ 0.174090] PCI: Using ACPI for IRQ routing
[ 0.175695] PCI: pci_cache_line_size set to 64 bytes
[ 0.176206] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.176209] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.176211] e820: reserve RAM buffer [mem 0xced4e000-0xcfffffff]
[ 0.176213] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
[ 0.176220] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.176220] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.178147] clocksource: Switched to clocksource tsc-early
[ 0.188693] VFS: Disk quotas dquot_6.6.0
[ 0.188716] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.188826] ACPI FPDT: [Firmware Bug]: Invalid subtable type 12288 found.
[ 0.188828] ACPI FPDT: [Firmware Bug]: Invalid subtable type 12289 found.
[ 0.188835] pnp: PnP ACPI init
[ 0.189691] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.189697] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.189699] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.189703] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.189706] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.189708] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.189711] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.189713] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.189716] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.189718] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.189721] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.189723] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.189725] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.189727] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.189729] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[ 0.189732] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.189734] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.189743] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.189918] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[ 0.189942] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.189945] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.189947] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.189949] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.189952] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.189956] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.189959] system 00:01: [mem 0xfffff000-0xffffffff] has been reserved
[ 0.189962] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.189965] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.189968] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.189971] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.189974] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.189980] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.190056] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.190082] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[ 0.190108] pnp 00:04: Plug and Play ACPI device, IDs LEN0030 PNP0f13 (active)
[ 0.190179] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.190839] pnp: PnP ACPI: found 6 devices
[ 0.197269] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.197346] NET: Registered protocol family 2
[ 0.197566] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.197623] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.197813] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.197922] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.198001] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.198061] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.198093] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.198280] NET: Registered protocol family 1
[ 0.198287] NET: Registered protocol family 44
[ 0.198299] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.198309] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.198317] pci 0000:00:1c.0: bridge window [mem 0xf0d00000-0xf14fffff]
[ 0.198323] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.198333] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.198340] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf0cfffff]
[ 0.198354] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.198357] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.198359] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.198361] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
[ 0.198364] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[ 0.198366] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.198368] pci_bus 0000:02: resource 1 [mem 0xf0d00000-0xf14fffff]
[ 0.198370] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.198372] pci_bus 0000:03: resource 1 [mem 0xf0c00000-0xf0cfffff]
[ 0.198493] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.199148] PCI: CLS 64 bytes, default 64
[ 0.199210] Trying to unpack rootfs image as initramfs...
[ 0.280257] Freeing initrd memory: 11480K
[ 0.280309] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.280310] software IO TLB: mapped [mem 0x00000000cad4e000-0x00000000ced4e000] (64MB)
[ 0.280773] check: Scanning for low memory corruption every 60 seconds
[ 0.281156] Initialise system trusted keyrings
[ 0.281167] Key type blacklist registered
[ 0.281227] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.282708] zbud: loaded
[ 0.298575] Key type asymmetric registered
[ 0.298578] Asymmetric key parser 'x509' registered
[ 0.298588] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.298632] io scheduler mq-deadline registered
[ 0.298634] io scheduler kyber registered
[ 0.298662] io scheduler bfq registered
[ 0.299395] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.299433] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 0.299436] vesafb: scrolling: redraw
[ 0.299437] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.299456] vesafb: framebuffer at 0xe0000000, mapped to 0x000000004dc38280, using 5632k, total 5632k
[ 0.299506] fbcon: Deferring console take-over
[ 0.299508] fb0: VESA VGA frame buffer device
[ 0.300339] ACPI: AC: AC Adapter [AC] (on-line)
[ 0.300418] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.303786] ACPI: button: Lid Switch [LID]
[ 0.303834] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.304044] ACPI: button: Sleep Button [SLPB]
[ 0.304112] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.304154] ACPI: button: Power Button [PWRF]
[ 0.306569] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.306574] ACPI: thermal: Thermal Zone [THM0] (49 C)
[ 0.306847] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.309490] Non-volatile memory driver v1.3
[ 0.309493] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.309495] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.310392] ahci 0000:00:1f.2: version 3.0
[ 0.310693] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 0.310700] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.311533] scsi host0: ahci
[ 0.312339] scsi host1: ahci
[ 0.312826] scsi host2: ahci
[ 0.313110] scsi host3: ahci
[ 0.313578] scsi host4: ahci
[ 0.313722] scsi host5: ahci
[ 0.313783] ata1: SATA max UDMA/133 abar m2048@0xf1518000 port 0xf1518100 irq 28
[ 0.313786] ata2: DUMMY
[ 0.313788] ata3: DUMMY
[ 0.313789] ata4: DUMMY
[ 0.313790] ata5: DUMMY
[ 0.313792] ata6: DUMMY
[ 0.313836] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.313843] ehci-pci: EHCI PCI platform driver
[ 0.313963] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.313974] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.313991] ehci-pci 0000:00:1a.0: debug port 2
[ 0.317930] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf151a000
[ 0.320319] ACPI: battery: Slot [BAT0] (battery present)
[ 0.330427] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.330512] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12
[ 0.330516] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.330518] usb usb1: Product: EHCI Host Controller
[ 0.330521] usb usb1: Manufacturer: Linux 5.12.1-arch1-1 ehci_hcd
[ 0.330522] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.330668] hub 1-0:1.0: USB hub found
[ 0.330678] hub 1-0:1.0: 3 ports detected
[ 0.331014] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.331021] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.331037] ehci-pci 0000:00:1d.0: debug port 2
[ 0.334952] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1519000
[ 0.347168] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.347286] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12
[ 0.347291] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.347293] usb usb2: Product: EHCI Host Controller
[ 0.347295] usb usb2: Manufacturer: Linux 5.12.1-arch1-1 ehci_hcd
[ 0.347297] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.347531] hub 2-0:1.0: USB hub found
[ 0.347547] hub 2-0:1.0: 3 ports detected
[ 0.347867] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.347880] ohci-pci: OHCI PCI platform driver
[ 0.347898] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.347954] usbcore: registered new interface driver usbserial_generic
[ 0.347961] usbserial: USB Serial support registered for generic
[ 0.348184] rtc_cmos 00:02: RTC can wake from S4
[ 0.348484] rtc_cmos 00:02: registered as rtc0
[ 0.348558] rtc_cmos 00:02: setting system clock to 2021-05-06T01:28:05 UTC (1620264485)
[ 0.348580] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.348803] intel_pstate: Intel P-state driver initializing
[ 0.349485] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.349701] hid: raw HID events driver (C) Jiri Kosina
[ 0.349775] drop_monitor: Initializing network drop monitor service
[ 0.349831] Initializing XFRM netlink socket
[ 0.349918] NET: Registered protocol family 10
[ 0.354278] Segment Routing with IPv6
[ 0.354280] RPL Segment Routing with IPv6
[ 0.354300] NET: Registered protocol family 17
[ 0.354522] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 0.354536] microcode: Microcode Update Driver: v2.2.
[ 0.354540] IPI shorthand broadcast: enabled
[ 0.354554] sched_clock: Marking stable (353971244, 479153)->(362076560, -7626163)
[ 0.354624] registered taskstats version 1
[ 0.354634] Loading compiled-in X.509 certificates
[ 0.357154] Loaded X.509 cert 'Build time autogenerated kernel key: be58a462f143e89e86f5e2396e34dbf5ed014d41'
[ 0.357440] zswap: loaded using pool lz4/z3fold
[ 0.357558] Key type ._fscrypt registered
[ 0.357560] Key type .fscrypt registered
[ 0.357561] Key type fscrypt-provisioning registered
[ 0.357862] PM: Magic number: 5:472:457
[ 0.358019] RAS: Correctable Errors collector initialized.
[ 0.630508] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.631218] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.631241] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.634814] ata1.00: ATA-8: SanDisk SD5SG2256G1052E, 10.04.01, max UDMA/133
[ 0.634819] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 0.635610] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.635627] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.636650] ata1.00: configured for UDMA/133
[ 0.647454] scsi 0:0:0:0: Direct-Access ATA SanDisk SD5SG225 4.01 PQ: 0 ANSI: 5
[ 0.647812] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 0.647823] sd 0:0:0:0: [sda] Write Protect is off
[ 0.647825] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.647836] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.648832] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 0.660466] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.673960] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.675036] Freeing unused decrypted memory: 2036K
[ 0.675287] Freeing unused kernel image (initmem) memory: 1652K
[ 0.675341] Write protecting the kernel read-only data: 26624k
[ 0.675737] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 0.675904] Freeing unused kernel image (rodata/data gap) memory: 1252K
[ 0.677088] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.724040] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.724044] rodata_test: all tests were successful
[ 0.724045] x86/mm: Checking user space page tables
[ 0.770451] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.770456] Run /init as init process
[ 0.770457] with arguments:
[ 0.770458] /init
[ 0.770459] with environment:
[ 0.770459] HOME=/
[ 0.770460] TERM=linux
[ 0.770461] BOOT_IMAGE=/boot/vmlinuz-linux
[ 0.782841] fbcon: Taking over console
[ 0.782914] Console: switching to colour frame buffer device 200x56
[ 0.824085] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 0.824088] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.824357] hub 1-1:1.0: USB hub found
[ 0.824459] hub 1-1:1.0: 6 ports detected
[ 0.830714] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 0.830716] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.830858] hub 2-1:1.0: USB hub found
[ 0.830963] hub 2-1:1.0: 8 ports detected
[ 0.942790] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.942801] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.943703] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.943876] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[ 0.944075] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12
[ 0.944078] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.944081] usb usb3: Product: xHCI Host Controller
[ 0.944083] usb usb3: Manufacturer: Linux 5.12.1-arch1-1 xhci-hcd
[ 0.944085] usb usb3: SerialNumber: 0000:00:14.0
[ 0.944399] sdhci: Secure Digital Host Controller Interface driver
[ 0.944401] sdhci: Copyright(c) Pierre Ossman
[ 0.944458] hub 3-0:1.0: USB hub found
[ 0.944472] hub 3-0:1.0: 4 ports detected
[ 0.945144] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.945150] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.945154] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.945200] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12
[ 0.945204] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.945207] usb usb4: Product: xHCI Host Controller
[ 0.945209] usb usb4: Manufacturer: Linux 5.12.1-arch1-1 xhci-hcd
[ 0.945211] usb usb4: SerialNumber: 0000:00:14.0
[ 0.945370] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.945413] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.945543] hub 4-0:1.0: USB hub found
[ 0.945555] hub 4-0:1.0: 4 ports detected
[ 0.948925] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 0.949574] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 0.952418] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 0.962716] random: fast init done
[ 0.971070] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.053081] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 1.103773] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 1.202471] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
[ 1.202476] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.202477] usb 1-1.3: Product: Biometric Coprocessor
[ 1.202479] usb 1-1.3: Manufacturer: Auth
[ 1.242117] systemd[1]: systemd 248-5-arch running in system mode. (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 1.257320] systemd[1]: Detected architecture x86-64.
[ 1.258103] systemd[1]: Hostname set to <X1G1>.
[ 1.273743] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[ 1.273756] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[ 1.287147] tsc: Refined TSC clocksource calibration: 2494.332 MHz
[ 1.287182] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f44f92df3, max_idle_ns: 440795329494 ns
[ 1.287214] clocksource: Switched to clocksource tsc
[ 1.375787] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
[ 1.375793] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.375795] usb 1-1.4: Product: BCM20702A0
[ 1.375796] usb 1-1.4: Manufacturer: Broadcom Corp
[ 1.375798] usb 1-1.4: SerialNumber: 0C84DCD828A7
[ 1.390013] systemd[1]: Queued start job for default target Graphical Interface.
[ 1.391082] systemd[1]: Created slice system-getty.slice.
[ 1.391301] systemd[1]: Created slice system-modprobe.slice.
[ 1.391480] systemd[1]: Created slice User and Session Slice.
[ 1.391537] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.391581] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.391710] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.391735] systemd[1]: Reached target Local Encrypted Volumes.
[ 1.391746] systemd[1]: Reached target Login Prompts.
[ 1.391766] systemd[1]: Reached target Paths.
[ 1.391775] systemd[1]: Reached target Remote File Systems.
[ 1.391783] systemd[1]: Reached target Slices.
[ 1.391799] systemd[1]: Reached target Local Verity Integrity Protected Volumes.
[ 1.391852] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.392763] systemd[1]: Listening on Process Core Dump Socket.
[ 1.392898] systemd[1]: Listening on Journal Audit Socket.
[ 1.392982] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.393074] systemd[1]: Listening on Journal Socket.
[ 1.393178] systemd[1]: Listening on udev Control Socket.
[ 1.393246] systemd[1]: Listening on udev Kernel Socket.
[ 1.394073] systemd[1]: Mounting Huge Pages File System...
[ 1.394745] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.395468] systemd[1]: Mounting Kernel Debug File System...
[ 1.396467] systemd[1]: Mounting Kernel Trace File System...
[ 1.397538] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 1.398432] systemd[1]: Starting Load Kernel Module configfs...
[ 1.399497] systemd[1]: Starting Load Kernel Module drm...
[ 1.400534] systemd[1]: Starting Load Kernel Module fuse...
[ 1.401225] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 1.401266] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 1.402941] systemd[1]: Starting Journal Service...
[ 1.404488] systemd[1]: Starting Load Kernel Modules...
[ 1.405319] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.405400] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[ 1.405909] Linux agpgart interface v0.103
[ 1.406298] systemd[1]: Starting Coldplug All udev Devices...
[ 1.408829] systemd[1]: Mounted Huge Pages File System.
[ 1.408983] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.409114] systemd[1]: Mounted Kernel Debug File System.
[ 1.409232] systemd[1]: Mounted Kernel Trace File System.
[ 1.409625] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 1.410025] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 1.410294] systemd[1]: Finished Load Kernel Module configfs.
[ 1.411470] systemd[1]: Mounting Kernel Configuration File System...
[ 1.413538] EXT4-fs (sda6): re-mounted. Opts: (null). Quota mode: none.
[ 1.414501] usb 3-2: New USB device found, idVendor=2516, idProduct=0057, bcdDevice= 1.03
[ 1.414506] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.414510] usb 3-2: Product: MasterKeys S
[ 1.414512] usb 3-2: Manufacturer: Cooler Master Technology Inc.
[ 1.417990] systemd[1]: Mounted Kernel Configuration File System.
[ 1.419578] Asymmetric key parser 'pkcs8' registered
[ 1.419679] fuse: init (API version 7.33)
[ 1.420617] systemd[1]: Finished Load Kernel Modules.
[ 1.420677] audit: type=1130 audit(1620264486.568:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.421857] systemd[1]: Starting Apply Kernel Variables...
[ 1.424442] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 1.424519] audit: type=1130 audit(1620264486.572:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.430469] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[ 1.431802] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 1.432858] systemd[1]: Starting Load/Save Random Seed...
[ 1.433876] systemd[1]: Starting Create System Users...
[ 1.434612] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 1.434960] systemd[1]: Finished Load Kernel Module fuse.
[ 1.435034] audit: type=1130 audit(1620264486.582:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.435073] audit: type=1131 audit(1620264486.582:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.435531] systemd[1]: Finished Apply Kernel Variables.
[ 1.435563] audit: type=1130 audit(1620264486.582:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.436723] systemd[1]: Mounting FUSE Control File System...
[ 1.445866] systemd[1]: Mounted FUSE Control File System.
[ 1.450439] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[ 1.452653] systemd[1]: Finished Create System Users.
[ 1.452717] audit: type=1130 audit(1620264486.598:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.453663] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.464564] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 1.464854] systemd[1]: Finished Load Kernel Module drm.
[ 1.464902] audit: type=1130 audit(1620264486.612:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.464922] audit: type=1131 audit(1620264486.612:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.475653] systemd[1]: Started Journal Service.
[ 1.475739] audit: type=1130 audit(1620264486.622:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.483195] systemd-journald[211]: Received client request to flush runtime journal.
[ 1.555926] input: Cooler Master Technology Inc. MasterKeys S as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:2516:0057.0001/input/input5
[ 1.601254] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.601387] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.611792] usb 1-1.6: New USB device found, idVendor=5986, idProduct=0266, bcdDevice=14.12
[ 1.611797] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.611799] usb 1-1.6: Product: Integrated Camera
[ 1.611801] usb 1-1.6: Manufacturer: SunplusIT INC.
[ 1.614822] hid-generic 0003:2516:0057.0001: input,hidraw0: USB HID v1.11 Keyboard [Cooler Master Technology Inc. MasterKeys S] on usb-0000:00:14.0-2/input0
[ 1.615448] hid-generic 0003:2516:0057.0002: hiddev96,hidraw1: USB HID v1.11 Device [Cooler Master Technology Inc. MasterKeys S] on usb-0000:00:14.0-2/input1
[ 1.616187] input: Cooler Master Technology Inc. MasterKeys S System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:2516:0057.0003/input/input6
[ 1.650977] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20210105/utaddress-204)
[ 1.650993] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 1.650997] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20210105/utaddress-204)
[ 1.651004] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 1.651006] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20210105/utaddress-204)
[ 1.651011] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 1.651013] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20210105/utaddress-204)
[ 1.651019] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 1.651020] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.670505] input: Cooler Master Technology Inc. MasterKeys S Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:2516:0057.0003/input/input7
[ 1.670565] input: Cooler Master Technology Inc. MasterKeys S Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:2516:0057.0003/input/input8
[ 1.670639] hid-generic 0003:2516:0057.0003: input,hidraw2: USB HID v1.11 Keyboard [Cooler Master Technology Inc. MasterKeys S] on usb-0000:00:14.0-2/input2
[ 1.670681] usbcore: registered new interface driver usbhid
[ 1.670683] usbhid: USB HID core driver
[ 1.707196] Adding 8190972k swap on /dev/sda5. Priority:-2 extents:1 across:8190972k SSFS
[ 1.720759] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 1.744816] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[ 1.754164] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.754764] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 1.797533] tpm tpm0: TPM is disabled/deactivated (0x6)
[ 1.867663] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 1.882827] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 1.882832] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 1.882833] thinkpad_acpi: ThinkPad BIOS G6ETC5WW (2.85 ), EC G6HT25WW
[ 1.882835] thinkpad_acpi: Lenovo ThinkPad X1 Carbon, model 3443CTO
[ 1.884497] thinkpad_acpi: radio switch found; radios are enabled
[ 1.884518] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 1.884638] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 1.884641] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 1.885022] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 1.894872] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 1.912006] NET: Registered protocol family 38
[ 1.924862] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 1.924867] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 1.924869] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 1.924870] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 1.947781] thinkpad_acpi: battery 1 registered (start 75, stop 80)
[ 1.947795] ACPI: battery: new extension: ThinkPad Battery Extension
[ 1.947856] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input11
[ 1.960480] cryptd: max_cpu_qlen set to 1000
[ 1.998367] Bluetooth: Core ver 2.22
[ 1.998391] NET: Registered protocol family 31
[ 1.998393] Bluetooth: HCI device and connection manager initialized
[ 1.998397] Bluetooth: HCI socket layer initialized
[ 1.998400] Bluetooth: L2CAP socket layer initialized
[ 1.998405] Bluetooth: SCO socket layer initialized
[ 2.012578] mc: Linux media interface: v0.10
[ 2.037586] iTCO_vendor_support: vendor-support=0
[ 2.053095] AVX version of gcm_enc/dec engaged.
[ 2.053124] AES CTR mode by8 optimization enabled
[ 2.069649] videodev: Linux video capture interface: v2.00
[ 2.070759] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.076919] iTCO_wdt iTCO_wdt.1.auto: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.078618] usbcore: registered new interface driver btusb
[ 2.090313] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[ 2.091700] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.091980] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.091985] cfg80211: failed to load regulatory.db
[ 2.140483] usb 1-1.6: Found UVC 1.00 device Integrated Camera (5986:0266)
[ 2.164262] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input12
[ 2.164359] usbcore: registered new interface driver uvcvideo
[ 2.192342] Bluetooth: hci0: BCM: chip id 63
[ 2.193275] Bluetooth: hci0: BCM: features 0x07
[ 2.209433] Bluetooth: hci0: BCM20702A
[ 2.209440] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 2.211774] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
[ 2.211777] Bluetooth: hci0: BCM: 'brcm/BCM20702A1-0a5c-21e6.hcd'
[ 2.211779] Bluetooth: hci0: BCM: 'brcm/BCM-0a5c-21e6.hcd'
[ 2.214024] Intel(R) Wireless WiFi driver for Linux
[ 2.214247] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.228974] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 6000g2a-6.ucode op_mode iwldvm
[ 2.332262] intel_rapl_common: Found RAPL domain package
[ 2.332267] intel_rapl_common: Found RAPL domain core
[ 2.332269] intel_rapl_common: Found RAPL domain uncore
[ 2.332275] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 2.399352] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 2.399358] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 2.399360] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 2.399362] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205S AGN, REV=0xB0
[ 2.433281] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.443171] checking generic (e0000000 580000) vs hw (f0000000 400000)
[ 2.443176] checking generic (e0000000 580000) vs hw (e0000000 10000000)
[ 2.443177] fb0: switching to inteldrmfb from VESA VGA
[ 2.443306] Console: switching to colour dummy device 80x25
[ 2.443353] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.445552] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.490407] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 2.497252] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 2.497982] ACPI: video: Video Device [VID] (multi-head: yes rom: no post: no)
[ 2.498300] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
[ 2.499737] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.527854] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4732]
[ 2.558688] psmouse serio1: synaptics: queried min coordinates: x [1264..], y [1124..]
[ 2.558698] psmouse serio1: synaptics: Your touchpad (PNP: LEN0030 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 2.622317] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00/0x0, board id: 2182, fw id: 1164733
[ 2.622344] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.655249] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 2.659756] mousedev: PS/2 mouse device common for all mice
[ 2.714285] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 2.714293] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.714296] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 2.714299] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.714301] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.714303] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 2.714306] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 2.735173] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 2.735247] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 2.735306] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 2.786062] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 2.873635] fbcon: i915drmfb (fb0) is primary device
[ 3.114001] wlan0: authenticate with b0:c7:45:75:e8:c6
[ 3.119072] wlan0: send auth to b0:c7:45:75:e8:c6 (try 1/3)
[ 3.121091] wlan0: authenticated
[ 3.123741] wlan0: associate with b0:c7:45:75:e8:c6 (try 1/3)
[ 3.127221] wlan0: RX AssocResp from b0:c7:45:75:e8:c6 (capab=0x411 status=0 aid=2)
[ 3.146939] wlan0: associated
[ 3.220411] random: crng init done
[ 3.289603] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 3.490783] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
[ 3.750363] Console: switching to colour frame buffer device 200x56
[ 3.776352] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 6.444499] kauditd_printk_skb: 28 callbacks suppressed
[ 6.444505] audit: type=1103 audit(1620264491.592:39): pid=443 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_env,pam_permit acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 6.458968] audit: type=1130 audit(1620264491.605:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.471538] audit: type=1101 audit(1620264491.618:41): pid=447 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="lightdm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.471580] audit: type=1103 audit(1620264491.618:42): pid=447 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="lightdm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 6.471641] audit: type=1006 audit(1620264491.618:43): pid=447 uid=0 old-auid=4294967295 auid=975 tty=(none) old-ses=4294967295 ses=1 res=1
[ 6.471655] audit: type=1300 audit(1620264491.618:43): arch=c000003e syscall=1 success=yes exit=3 a0=9 a1=7fff81ec5cc0 a2=3 a3=3cf items=0 ppid=1 pid=447 auid=975 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/usr/lib/systemd/systemd" key=(null)
[ 6.471659] audit: type=1327 audit(1620264491.618:43): proctitle="(systemd)"
[ 6.473435] audit: type=1105 audit(1620264491.618:44): pid=447 uid=0 auid=975 ses=1 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="lightdm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.478915] audit: type=1334 audit(1620264491.625:45): prog-id=22 op=LOAD
[ 6.478923] audit: type=1300 audit(1620264491.625:45): arch=c000003e syscall=321 success=yes exit=8 a0=5 a1=7ffd61c3b0c0 a2=78 a3=7ffd61c3b0c0 items=0 ppid=1 pid=447 auid=975 uid=975 gid=975 euid=975 suid=975 fsuid=975 egid=975 sgid=975 fsgid=975 tty=(none) ses=1 comm="systemd" exe="/usr/lib/systemd/systemd" key=(null)
[ 11.475378] kauditd_printk_skb: 5 callbacks suppressed
[ 11.475382] audit: type=1100 audit(1620264496.622:50): pid=476 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_shells,pam_faillock,pam_permit,pam_faillock acct="sergi" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 11.478218] audit: type=1101 audit(1620264496.625:51): pid=476 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="sergi" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 11.515411] audit: type=1106 audit(1620264496.662:52): pid=443 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_unix,pam_systemd acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 11.515552] audit: type=1104 audit(1620264496.662:53): pid=443 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_env,pam_permit acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 11.520340] audit: type=1103 audit(1620264496.665:54): pid=476 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_faillock acct="sergi" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 11.520424] audit: type=1006 audit(1620264496.668:55): pid=476 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 11.520445] audit: type=1300 audit(1620264496.668:55): arch=c000003e syscall=1 success=yes exit=4 a0=b a1=7ffd20323d80 a2=4 a3=3e8 items=0 ppid=414 pid=476 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="lightdm" exe="/usr/bin/lightdm" key=(null)
[ 11.520460] audit: type=1327 audit(1620264496.668:55): proctitle=6C69676874646D002D2D73657373696F6E2D6368696C64003134003231
[ 11.532364] audit: type=1130 audit(1620264496.678:56): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.538646] audit: type=1101 audit(1620264496.685:57): pid=485 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="sergi" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 21.807571] kauditd_printk_skb: 12 callbacks suppressed
[ 21.807574] audit: type=1131 audit(1620264506.955:66): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 21.818664] audit: type=1131 audit(1620264506.965:67): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 97.219078] audit: type=1100 audit(1620264582.365:68): pid=557 uid=1000 auid=1000 ses=2 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="sergi" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 97.221782] audit: type=1101 audit(1620264582.368:69): pid=557 uid=1000 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="sergi" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 97.223519] audit: type=1110 audit(1620264582.368:70): pid=557 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 97.224009] audit: type=1105 audit(1620264582.372:71): pid=557 uid=1000 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 97.244544] audit: type=1106 audit(1620264582.392:72): pid=557 uid=1000 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 97.244665] audit: type=1104 audit(1620264582.392:73): pid=557 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 106.795591] audit: type=1101 audit(1620264591.942:74): pid=559 uid=1000 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="sergi" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 106.796294] audit: type=1110 audit(1620264591.942:75): pid=559 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 106.796476] audit: type=1105 audit(1620264591.942:76): pid=559 uid=1000 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 109.246993] audit: type=1106 audit(1620264594.392:77): pid=559 uid=1000 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 109.247238] audit: type=1104 audit(1620264594.395:78): pid=559 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 841.185751] audit: type=1101 audit(1620265326.332:79): pid=973 uid=1000 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="sergi" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 841.186994] audit: type=1110 audit(1620265326.335:80): pid=973 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 841.187151] audit: type=1105 audit(1620265326.335:81): pid=973 uid=1000 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'Output of lspci:
$ lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QS77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04)
02:00.0 System peripheral: Ricoh Co Ltd MMC/SD Host Controller (rev 07)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 96)And the /var/log/Xorg.cong.0
[ 3.697]
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[ 3.697] Build Operating System: Linux Archlinux
[ 3.697] Current Operating System: Linux X1G1 5.12.1-arch1-1 #1 SMP PREEMPT Sun, 02 May 2021 12:43:58 +0000 x86_64
[ 3.697] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=714e112b-270c-4b1e-b18a-dc8891b785bb rw loglevel=3 quiet
[ 3.697] Build Date: 13 April 2021 03:12:10PM
[ 3.697]
[ 3.697] Current version of pixman: 0.40.0
[ 3.697] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3.697] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.697] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 5 17:51:43 2021
[ 3.701] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3.701] (==) No Layout section. Using the first Screen section.
[ 3.701] (==) No screen section available. Using defaults.
[ 3.701] (**) |-->Screen "Default Screen Section" (0)
[ 3.701] (**) | |-->Monitor "<default monitor>"
[ 3.701] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.701] (==) Automatically adding devices
[ 3.701] (==) Automatically enabling devices
[ 3.701] (==) Automatically adding GPU devices
[ 3.701] (==) Automatically binding GPU devices
[ 3.701] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 3.702] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 3.702] Entry deleted from font path.
[ 3.702] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 3.702] Entry deleted from font path.
[ 3.702] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 3.702] Entry deleted from font path.
[ 3.702] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 3.702] Entry deleted from font path.
[ 3.702] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 3.702] Entry deleted from font path.
[ 3.702] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 3.702] Entry deleted from font path.
[ 3.702] (==) FontPath set to:
[ 3.702] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.702] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.702] (II) Module ABI versions:
[ 3.702] X.Org ANSI C Emulation: 0.4
[ 3.702] X.Org Video Driver: 24.1
[ 3.702] X.Org XInput driver : 24.1
[ 3.702] X.Org Server Extension : 10.0
[ 3.703] (++) using VT number 7
[ 3.703] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 3.703] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.045] (--) PCI:*(0@0:2:0) 8086:0166:17aa:21f9 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 4.046] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4.046] (II) LoadModule: "glx"
[ 4.052] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.066] (II) Module glx: vendor="X.Org Foundation"
[ 4.066] compiled for 1.20.11, module version = 1.0.0
[ 4.066] ABI class: X.Org Server Extension, version 10.0
[ 4.066] (==) Matched intel as autoconfigured driver 0
[ 4.066] (==) Matched modesetting as autoconfigured driver 1
[ 4.066] (==) Matched fbdev as autoconfigured driver 2
[ 4.066] (==) Matched vesa as autoconfigured driver 3
[ 4.066] (==) Assigned the driver to the xf86ConfigLayout
[ 4.066] (II) LoadModule: "intel"
[ 4.066] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4.070] (II) Module intel: vendor="X.Org Foundation"
[ 4.070] compiled for 1.20.10, module version = 2.99.917
[ 4.070] Module class: X.Org Video Driver
[ 4.070] ABI class: X.Org Video Driver, version 24.1
[ 4.070] (II) LoadModule: "modesetting"
[ 4.070] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4.073] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.073] compiled for 1.20.11, module version = 1.20.11
[ 4.073] Module class: X.Org Video Driver
[ 4.073] ABI class: X.Org Video Driver, version 24.1
[ 4.073] (II) LoadModule: "fbdev"
[ 4.074] (WW) Warning, couldn't open module fbdev
[ 4.074] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4.074] (II) LoadModule: "vesa"
[ 4.074] (WW) Warning, couldn't open module vesa
[ 4.074] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4.074] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 4.074] (II) intel: Driver for Intel(R) HD Graphics
[ 4.074] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 4.074] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 4.074] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.437] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[ 4.437] (II) intel(0): SNA compiled from 2.99.917-916-g31486f40
[ 4.454] (WW) Falling back to old probe method for modesetting
[ 4.456] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 4.456] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[ 4.456] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.456] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4.456] (==) intel(0): RGB weight 888
[ 4.456] (==) intel(0): Default visual is TrueColor
[ 4.458] (II) intel(0): Output LVDS1 has no monitor section
[ 4.458] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 4.458] (II) intel(0): Enabled output LVDS1
[ 4.459] (II) intel(0): Output VGA1 has no monitor section
[ 4.459] (II) intel(0): Enabled output VGA1
[ 4.459] (II) intel(0): Output HDMI1 has no monitor section
[ 4.459] (II) intel(0): Enabled output HDMI1
[ 4.459] (II) intel(0): Output DP1 has no monitor section
[ 4.460] (II) intel(0): Enabled output DP1
[ 4.460] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 4.460] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 4.460] (II) intel(0): Enabled output VIRTUAL1
[ 4.460] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[ 4.461] (==) intel(0): TearFree disabled
[ 4.461] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.461] (==) intel(0): DPI set to (96, 96)
[ 4.461] (II) Loading sub module "dri3"
[ 4.461] (II) LoadModule: "dri3"
[ 4.461] (II) Module "dri3" already built-in
[ 4.461] (II) Loading sub module "dri2"
[ 4.461] (II) LoadModule: "dri2"
[ 4.461] (II) Module "dri2" already built-in
[ 4.461] (II) Loading sub module "present"
[ 4.461] (II) LoadModule: "present"
[ 4.461] (II) Module "present" already built-in
[ 4.461] (II) UnloadModule: "modesetting"
[ 4.461] (II) Unloading modesetting
[ 4.466] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 4.466] (==) intel(0): Backing store enabled
[ 4.466] (==) intel(0): Silken mouse disabled
[ 4.466] (II) intel(0): HW Cursor enabled
[ 4.467] (==) intel(0): DPMS enabled
[ 4.467] (==) intel(0): Display hotplug detection enabled
[ 4.468] (II) intel(0): [DRI2] Setup complete
[ 4.468] (II) intel(0): [DRI2] DRI driver: i965
[ 4.468] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 4.468] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 4.468] (II) intel(0): hardware support for Present enabled
[ 4.468] (II) Initializing extension Generic Event Extension
[ 4.468] (II) Initializing extension SHAPE
[ 4.469] (II) Initializing extension MIT-SHM
[ 4.469] (II) Initializing extension XInputExtension
[ 4.469] (II) Initializing extension XTEST
[ 4.470] (II) Initializing extension BIG-REQUESTS
[ 4.470] (II) Initializing extension SYNC
[ 4.470] (II) Initializing extension XKEYBOARD
[ 4.470] (II) Initializing extension XC-MISC
[ 4.470] (II) Initializing extension SECURITY
[ 4.470] (II) Initializing extension XFIXES
[ 4.470] (II) Initializing extension RENDER
[ 4.470] (II) Initializing extension RANDR
[ 4.470] (II) Initializing extension COMPOSITE
[ 4.471] (II) Initializing extension DAMAGE
[ 4.471] (II) Initializing extension MIT-SCREEN-SAVER
[ 4.471] (II) Initializing extension DOUBLE-BUFFER
[ 4.471] (II) Initializing extension RECORD
[ 4.471] (II) Initializing extension DPMS
[ 4.471] (II) Initializing extension Present
[ 4.471] (II) Initializing extension DRI3
[ 4.471] (II) Initializing extension X-Resource
[ 4.471] (II) Initializing extension XVideo
[ 4.471] (II) Initializing extension XVideo-MotionCompensation
[ 4.471] (II) Initializing extension GLX
[ 4.522] (II) AIGLX: Loaded and initialized i965
[ 4.522] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4.522] (II) Initializing extension XFree86-VidModeExtension
[ 4.522] (II) Initializing extension XFree86-DGA
[ 4.522] (II) Initializing extension XFree86-DRI
[ 4.522] (II) Initializing extension DRI2
[ 4.529] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 4.538] (II) intel(0): Setting screen physical size to 423 x 238
[ 4.588] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 4.588] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4.588] (II) LoadModule: "libinput"
[ 4.588] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 4.592] (II) Module libinput: vendor="X.Org Foundation"
[ 4.592] compiled for 1.20.11, module version = 1.0.1
[ 4.592] Module class: X.Org XInput Driver
[ 4.592] ABI class: X.Org XInput driver, version 24.1
[ 4.592] (II) Using input driver 'libinput' for 'Power Button'
[ 4.592] (**) Power Button: always reports core events
[ 4.592] (**) Option "Device" "/dev/input/event2"
[ 4.593] (**) Option "_source" "server/udev"
[ 4.601] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 4.601] (II) event2 - Power Button: device is a keyboard
[ 4.601] (II) event2 - Power Button: device removed
[ 4.646] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 4.646] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4.650] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 4.650] (II) event2 - Power Button: device is a keyboard
[ 4.653] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 4.653] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 4.653] (II) Using input driver 'libinput' for 'Video Bus'
[ 4.653] (**) Video Bus: always reports core events
[ 4.653] (**) Option "Device" "/dev/input/event10"
[ 4.653] (**) Option "_source" "server/udev"
[ 4.654] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[ 4.654] (II) event10 - Video Bus: device is a keyboard
[ 4.655] (II) event10 - Video Bus: device removed
[ 4.713] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event10"
[ 4.713] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4.717] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[ 4.717] (II) event10 - Video Bus: device is a keyboard
[ 4.719] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 4.719] (II) No input driver specified, ignoring this device.
[ 4.719] (II) This device may have been added with another device file.
[ 4.720] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 4.720] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 4.720] (II) Using input driver 'libinput' for 'Sleep Button'
[ 4.720] (**) Sleep Button: always reports core events
[ 4.720] (**) Option "Device" "/dev/input/event1"
[ 4.720] (**) Option "_source" "server/udev"
[ 4.722] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 4.722] (II) event1 - Sleep Button: device is a keyboard
[ 4.722] (II) event1 - Sleep Button: device removed
[ 4.753] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 4.753] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 4.757] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 4.757] (II) event1 - Sleep Button: device is a keyboard
[ 4.761] (II) config/udev: Adding input device Cooler Master Technology Inc. MasterKeys S (/dev/input/event4)
[ 4.761] (**) Cooler Master Technology Inc. MasterKeys S: Applying InputClass "libinput keyboard catchall"
[ 4.761] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. MasterKeys S'
[ 4.761] (**) Cooler Master Technology Inc. MasterKeys S: always reports core events
[ 4.761] (**) Option "Device" "/dev/input/event4"
[ 4.761] (**) Option "_source" "server/udev"
[ 4.765] (II) event4 - Cooler Master Technology Inc. MasterKeys S: is tagged by udev as: Keyboard
[ 4.765] (II) event4 - Cooler Master Technology Inc. MasterKeys S: device is a keyboard
[ 4.766] (II) event4 - Cooler Master Technology Inc. MasterKeys S: device removed
[ 4.793] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:2516:0057.0001/input/input5/event4"
[ 4.793] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. MasterKeys S" (type: KEYBOARD, id 9)
[ 4.799] (II) event4 - Cooler Master Technology Inc. MasterKeys S: is tagged by udev as: Keyboard
[ 4.799] (II) event4 - Cooler Master Technology Inc. MasterKeys S: device is a keyboard
[ 4.803] (II) config/udev: Adding input device Cooler Master Technology Inc. MasterKeys S System Control (/dev/input/event5)
[ 4.803] (**) Cooler Master Technology Inc. MasterKeys S System Control: Applying InputClass "libinput keyboard catchall"
[ 4.803] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. MasterKeys S System Control'
[ 4.803] (**) Cooler Master Technology Inc. MasterKeys S System Control: always reports core events
[ 4.803] (**) Option "Device" "/dev/input/event5"
[ 4.803] (**) Option "_source" "server/udev"
[ 4.807] (II) event5 - Cooler Master Technology Inc. MasterKeys S System Control: is tagged by udev as: Keyboard
[ 4.807] (II) event5 - Cooler Master Technology Inc. MasterKeys S System Control: device is a keyboard
[ 4.808] (II) event5 - Cooler Master Technology Inc. MasterKeys S System Control: device removed
[ 4.833] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:2516:0057.0003/input/input6/event5"
[ 4.833] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. MasterKeys S System Control" (type: KEYBOARD, id 10)
[ 4.839] (II) event5 - Cooler Master Technology Inc. MasterKeys S System Control: is tagged by udev as: Keyboard
[ 4.839] (II) event5 - Cooler Master Technology Inc. MasterKeys S System Control: device is a keyboard
[ 4.842] (II) config/udev: Adding input device Cooler Master Technology Inc. MasterKeys S Consumer Control (/dev/input/event6)
[ 4.842] (**) Cooler Master Technology Inc. MasterKeys S Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 4.843] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. MasterKeys S Consumer Control'
[ 4.843] (**) Cooler Master Technology Inc. MasterKeys S Consumer Control: always reports core events
[ 4.843] (**) Option "Device" "/dev/input/event6"
[ 4.843] (**) Option "_source" "server/udev"
[ 4.847] (II) event6 - Cooler Master Technology Inc. MasterKeys S Consumer Control: is tagged by udev as: Keyboard
[ 4.847] (II) event6 - Cooler Master Technology Inc. MasterKeys S Consumer Control: device is a keyboard
[ 4.848] (II) event6 - Cooler Master Technology Inc. MasterKeys S Consumer Control: device removed
[ 4.913] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:2516:0057.0003/input/input7/event6"
[ 4.913] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. MasterKeys S Consumer Control" (type: KEYBOARD, id 11)
[ 4.919] (II) event6 - Cooler Master Technology Inc. MasterKeys S Consumer Control: is tagged by udev as: Keyboard
[ 4.919] (II) event6 - Cooler Master Technology Inc. MasterKeys S Consumer Control: device is a keyboard
[ 4.922] (II) config/udev: Adding input device Cooler Master Technology Inc. MasterKeys S Keyboard (/dev/input/event8)
[ 4.923] (**) Cooler Master Technology Inc. MasterKeys S Keyboard: Applying InputClass "libinput keyboard catchall"
[ 4.923] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. MasterKeys S Keyboard'
[ 4.923] (**) Cooler Master Technology Inc. MasterKeys S Keyboard: always reports core events
[ 4.923] (**) Option "Device" "/dev/input/event8"
[ 4.923] (**) Option "_source" "server/udev"
[ 4.927] (II) event8 - Cooler Master Technology Inc. MasterKeys S Keyboard: is tagged by udev as: Keyboard
[ 4.927] (II) event8 - Cooler Master Technology Inc. MasterKeys S Keyboard: device is a keyboard
[ 4.928] (II) event8 - Cooler Master Technology Inc. MasterKeys S Keyboard: device removed
[ 4.966] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:2516:0057.0003/input/input8/event8"
[ 4.967] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. MasterKeys S Keyboard" (type: KEYBOARD, id 12)
[ 4.972] (II) event8 - Cooler Master Technology Inc. MasterKeys S Keyboard: is tagged by udev as: Keyboard
[ 4.973] (II) event8 - Cooler Master Technology Inc. MasterKeys S Keyboard: device is a keyboard
[ 4.976] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event11)
[ 4.976] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[ 4.976] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[ 4.976] (**) Integrated Camera: Integrated C: always reports core events
[ 4.976] (**) Option "Device" "/dev/input/event11"
[ 4.976] (**) Option "_source" "server/udev"
[ 4.978] (II) event11 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[ 4.978] (II) event11 - Integrated Camera: Integrated C: device is a keyboard
[ 4.978] (II) event11 - Integrated Camera: Integrated C: device removed
[ 5.033] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input13/event11"
[ 5.033] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 13)
[ 5.039] (II) event11 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[ 5.039] (II) event11 - Integrated Camera: Integrated C: device is a keyboard
[ 5.041] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 5.041] (II) No input driver specified, ignoring this device.
[ 5.041] (II) This device may have been added with another device file.
[ 5.042] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[ 5.042] (II) No input driver specified, ignoring this device.
[ 5.042] (II) This device may have been added with another device file.
[ 5.043] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 5.044] (II) No input driver specified, ignoring this device.
[ 5.044] (II) This device may have been added with another device file.
[ 5.045] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 5.045] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 5.045] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 5.045] (**) AT Translated Set 2 keyboard: always reports core events
[ 5.045] (**) Option "Device" "/dev/input/event3"
[ 5.045] (**) Option "_source" "server/udev"
[ 5.048] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 5.048] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 5.051] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 5.086] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 5.087] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 5.089] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 5.089] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 5.090] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[ 5.090] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 5.090] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 5.090] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 5.090] (**) Option "Device" "/dev/input/event15"
[ 5.090] (**) Option "_source" "server/udev"
[ 5.091] (II) event15 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 5.092] (II) event15 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 5.092] (II) event15 - SynPS/2 Synaptics TouchPad: device removed
[ 5.154] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event15"
[ 5.154] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 5.159] (**) Option "AccelerationScheme" "none"
[ 5.159] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 5.159] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 5.159] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 5.162] (II) event15 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 5.167] (II) event15 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 5.169] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 5.170] (II) No input driver specified, ignoring this device.
[ 5.170] (II) This device may have been added with another device file.
[ 5.171] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event16)
[ 5.171] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[ 5.171] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[ 5.171] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 5.171] (**) Option "Device" "/dev/input/event16"
[ 5.171] (**) Option "_source" "server/udev"
[ 5.175] (II) event16 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[ 5.176] (II) event16 - TPPS/2 IBM TrackPoint: device is a pointer
[ 5.180] (II) event16 - TPPS/2 IBM TrackPoint: device removed
[ 5.233] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input17/event16"
[ 5.233] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 16)
[ 5.234] (**) Option "AccelerationScheme" "none"
[ 5.234] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[ 5.234] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 5.234] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 5.238] (II) event16 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[ 5.239] (II) event16 - TPPS/2 IBM TrackPoint: device is a pointer
[ 5.245] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 5.245] (II) No input driver specified, ignoring this device.
[ 5.245] (II) This device may have been added with another device file.
[ 5.246] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 5.246] (II) No input driver specified, ignoring this device.
[ 5.246] (II) This device may have been added with another device file.
[ 5.255] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9)
[ 5.255] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[ 5.255] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[ 5.255] (**) ThinkPad Extra Buttons: always reports core events
[ 5.255] (**) Option "Device" "/dev/input/event9"
[ 5.255] (**) Option "_source" "server/udev"
[ 5.258] (II) event9 - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[ 5.258] (II) event9 - ThinkPad Extra Buttons: device is a keyboard
[ 5.258] (II) event9 - ThinkPad Extra Buttons: device is a switch device
[ 5.260] (II) event9 - ThinkPad Extra Buttons: device removed
[ 5.293] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input10/event9"
[ 5.293] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 17)
[ 5.297] (II) event9 - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[ 5.298] (II) event9 - ThinkPad Extra Buttons: device is a keyboard
[ 5.298] (II) event9 - ThinkPad Extra Buttons: device is a switch device
[ 5.325] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 5.325] (II) No input driver specified, ignoring this device.
[ 5.325] (II) This device may have been added with another device file.
[ 5.325] (II) config/udev: removing device TPPS/2 IBM TrackPoint
[ 5.325] (II) event16 - TPPS/2 IBM TrackPoint: device removed
[ 5.380] (II) UnloadModule: "libinput"
[ 5.382] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event16)
[ 5.382] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[ 5.382] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[ 5.382] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 5.382] (**) Option "Device" "/dev/input/event16"
[ 5.382] (**) Option "_source" "server/udev"
[ 5.385] (II) event16 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[ 5.386] (II) event16 - TPPS/2 IBM TrackPoint: device is a pointer
[ 5.387] (II) event16 - TPPS/2 IBM TrackPoint: device removed
[ 5.433] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input17/event16"
[ 5.433] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 16)
[ 5.433] (**) Option "AccelerationScheme" "none"
[ 5.433] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[ 5.433] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 5.433] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 5.434] (II) event16 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[ 5.434] (II) event16 - TPPS/2 IBM TrackPoint: device is a pointer
[ 6.468] (II) intel(0): EDID vendor "LGD", prod id 898
[ 6.468] (II) intel(0): Printing DDC gathered Modelines:
[ 6.468] (II) intel(0): Modeline "1600x900"x0.0 108.00 1600 1648 1680 1924 900 903 908 936 -hsync -vsync (56.1 kHz eP)
[ 396.518] (EE) event4 - Cooler Master Technology Inc. MasterKeys S: client bug: event processing lagging behind by 12ms, your system is too slow
[ 1428.166] (EE) event4 - Cooler Master Technology Inc. MasterKeys S: client bug: event processing lagging behind by 36ms, your system is too slow
[ 2173.654] (II) event2 - Power Button: device removed
[ 2173.663] (II) event10 - Video Bus: device removed
[ 2173.689] (II) event1 - Sleep Button: device removed
[ 2173.716] (II) event4 - Cooler Master Technology Inc. MasterKeys S: device removed
[ 2173.759] (II) event5 - Cooler Master Technology Inc. MasterKeys S System Control: device removed
[ 2173.799] (II) event6 - Cooler Master Technology Inc. MasterKeys S Consumer Control: device removed
[ 2173.839] (II) event8 - Cooler Master Technology Inc. MasterKeys S Keyboard: device removed
[ 2173.889] (II) event11 - Integrated Camera: Integrated C: device removed
[ 2173.933] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 2173.989] (II) event15 - SynPS/2 Synaptics TouchPad: device removed
[ 2174.033] (II) event9 - ThinkPad Extra Buttons: device removed
[ 2174.069] (II) event16 - TPPS/2 IBM TrackPoint: device removed
[ 2174.123] (II) UnloadModule: "libinput"
[ 2174.123] (II) UnloadModule: "libinput"
[ 2174.123] (II) UnloadModule: "libinput"
[ 2174.123] (II) UnloadModule: "libinput"
[ 2174.123] (II) UnloadModule: "libinput"
[ 2174.123] (II) UnloadModule: "libinput"
[ 2174.123] (II) UnloadModule: "libinput"
[ 2174.123] (II) UnloadModule: "libinput"
[ 2174.123] (II) UnloadModule: "libinput"
[ 2174.123] (II) UnloadModule: "libinput"
[ 2174.123] (II) UnloadModule: "libinput"
[ 2174.124] (II) UnloadModule: "libinput"
[ 2174.215] (II) Server terminated successfully (0). Closing log file.After rereading the wiki entries for Xorg, Intel Graphics and multimonitor, I can't see what I am missing. Any tips?
Last edited by Sachiel (2021-05-06 04:42:58)
Offline
#2 2021-05-06 04:41:35
- Sachiel
- Member
- Registered: 2007-04-06
- Posts: 16
- Website
Re: [SOLVED] Mini DisplayPort on laptop for external monitor not working
Interesting turn of events: after rebooting to Windows, the mini-DP was not working there either! Then, I decided to use a mini-DP to HDMI adapter, and that worked (I was back on Arch again). Next, I disconnected it, and connected back the mini-DP to DP cable, and this time it was detected.
So it seems that something the mini-DP port was left on a bad state somehow, and messing it with put it back on a working state.
Offline