You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2021-05-07 18:34:53
- b#QX52Et
- Member
- Registered: 2021-05-07
- Posts: 10
Xorg refuses to start after update.
Hello. I am having trouble getting xorg to launch after a update. I updated my system last night and upon trying to boot this morning Xorg is refusing to launch. This is output to the terminal.
xf86EnableIOPorts: failed to set IOPL for I/O (operation not permitted)
vesa: Refusing to run on UEFI
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server errorThis is the output of .local/share/xorg/Xorg.0.log
[ 11.871] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 11.873]
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[ 11.873] Build Operating System: Linux Archlinux
[ 11.873] Current Operating System: Linux arch 5.12.1-arch1-1 #1 SMP PREEMPT Sun, 02 May 2021 12:43:58 +0000 x86_64
[ 11.873] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c58a25dc-1330-4b8b-a295-44da1cc4835e rw loglevel=3 quiet
[ 11.873] Build Date: 13 April 2021 03:12:10PM
[ 11.873]
[ 11.873] Current version of pixman: 0.40.0
[ 11.873] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.874] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.874] (==) Log file: "/home/user1/.local/share/xorg/Xorg.0.log", Time: Fri May 7 12:08:09 2021
[ 11.888] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11.891] (==) No Layout section. Using the first Screen section.
[ 11.891] (==) No screen section available. Using defaults.
[ 11.891] (**) |-->Screen "Default Screen Section" (0)
[ 11.891] (**) | |-->Monitor "<default monitor>"
[ 11.892] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11.892] (==) Automatically adding devices
[ 11.892] (==) Automatically enabling devices
[ 11.892] (==) Automatically adding GPU devices
[ 11.892] (==) Automatically binding GPU devices
[ 11.892] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 11.892] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 11.892] Entry deleted from font path.
[ 11.893] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 11.893] Entry deleted from font path.
[ 11.893] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 11.893] Entry deleted from font path.
[ 11.913] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 11.913] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.913] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11.913] (II) Module ABI versions:
[ 11.913] X.Org ANSI C Emulation: 0.4
[ 11.913] X.Org Video Driver: 24.1
[ 11.913] X.Org XInput driver : 24.1
[ 11.913] X.Org Server Extension : 10.0
[ 11.914] (++) using VT number 1
[ 11.915] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 11.916] (--) PCI:*(1@0:0:0) 10de:1c81:1458:3765 rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 11.916] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11.916] (II) LoadModule: "glx"
[ 11.928] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.950] (II) Module glx: vendor="X.Org Foundation"
[ 11.950] compiled for 1.20.11, module version = 1.0.0
[ 11.950] ABI class: X.Org Server Extension, version 10.0
[ 11.950] (==) Matched nouveau as autoconfigured driver 0
[ 11.950] (==) Matched nv as autoconfigured driver 1
[ 11.950] (==) Matched modesetting as autoconfigured driver 2
[ 11.950] (==) Matched fbdev as autoconfigured driver 3
[ 11.950] (==) Matched vesa as autoconfigured driver 4
[ 11.950] (==) Assigned the driver to the xf86ConfigLayout
[ 11.950] (II) LoadModule: "nouveau"
[ 11.956] (WW) Warning, couldn't open module nouveau
[ 11.956] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 11.956] (II) LoadModule: "nv"
[ 11.956] (WW) Warning, couldn't open module nv
[ 11.956] (EE) Failed to load module "nv" (module does not exist, 0)
[ 11.956] (II) LoadModule: "modesetting"
[ 11.956] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 11.961] (II) Module modesetting: vendor="X.Org Foundation"
[ 11.961] compiled for 1.20.11, module version = 1.20.11
[ 11.961] Module class: X.Org Video Driver
[ 11.961] ABI class: X.Org Video Driver, version 24.1
[ 11.961] (II) LoadModule: "fbdev"
[ 11.962] (WW) Warning, couldn't open module fbdev
[ 11.962] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 11.962] (II) LoadModule: "vesa"
[ 11.962] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 11.973] (II) Module vesa: vendor="X.Org Foundation"
[ 11.973] compiled for 1.20.9, module version = 2.5.0
[ 11.973] Module class: X.Org Video Driver
[ 11.973] ABI class: X.Org Video Driver, version 24.1
[ 11.973] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 11.973] (II) VESA: driver for VESA chipsets: vesa
[ 11.973] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 11.973] (EE) open /dev/dri/card0: No such file or directory
[ 11.973] (WW) Falling back to old probe method for modesetting
[ 11.973] (EE) open /dev/dri/card0: No such file or directory
[ 11.973] vesa: Refusing to run on UEFI
[ 11.973] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 11.973] (EE) Screen 0 deleted because of no matching config section.
[ 11.973] (II) UnloadModule: "modesetting"
[ 11.973] (EE) Device(s) detected, but none match those in the config file.
[ 11.973] (EE)
Fatal server error:
[ 11.973] (EE) no screens found(EE)
[ 11.973] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 11.974] (EE) Please also check the log file at "/home/user1/.local/share/xorg/Xorg.0.log" for additional information.
[ 11.974] (EE)
[ 11.979] (EE) Server terminated with error (1). Closing log file.I apologize if this is trivial. I appreciate any help given.
Offline
#2 2021-05-07 20:38:09
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,039
Re: Xorg refuses to start after update.
[ 11.973] (EE) open /dev/dri/card0: No such file or directoryhttps://wiki.archlinux.org/index.php/Ke … _KMS_start
Do you intend to use the nouveau or nvidia driver?
Offline
#3 2021-05-07 21:21:50
- b#QX52Et
- Member
- Registered: 2021-05-07
- Posts: 10
Re: Xorg refuses to start after update.
I am using the nvidia driver.
Offline
#4 2021-05-07 21:25:23
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,039
Re: Xorg refuses to start after update.
Check "dmesg" and "lspci -k" on whether the nvidia module is loaded at all (also grep -i for "nvrm" in dmesg)
Offline
#5 2021-05-07 21:36:32
- b#QX52Et
- Member
- Registered: 2021-05-07
- Posts: 10
Re: Xorg refuses to start after update.
This is the relevant output of "lscpi -k"
VGA compatible controller: NVIDIA Corporation GP107 [GeForce GTX 1050] (rev a1)
Subsystem: Gigabyte Technology Co., Ltd Device 3765
Kernel modules: nouveauThis is curious because I never installed the nouveau drivers while I did install the nvidia drivers, which have worked fine up until this point.
Offline
#6 2021-05-07 21:43:26
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,323
Re: Xorg refuses to start after update.
Kernel modules: nouveauIs referring to the kernel module nouveau supplied by the linux package not the X driver supplied by xf86-video-nouveau.
"Kernel modules" are modules the kernel could try and use for the device.
The absence of "Kernel driver in use" entry means no driver is being used by the kernel for that device.
Edit:
The dmesg will hopefully provide more insight.
Last edited by loqs (2021-05-07 21:43:59)
Offline
#7 2021-05-07 21:51:22
- b#QX52Et
- Member
- Registered: 2021-05-07
- Posts: 10
Re: Xorg refuses to start after update.
I am not getting any output from "dmesg | grep -i nvrm". Am I making a mistake with this command?
Offline
#8 2021-05-07 22:18:31
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,323
Re: Xorg refuses to start after update.
What is the full output of:
modinfo nvidia
dmesgOffline
#9 2021-05-07 22:25:10
- b#QX52Et
- Member
- Registered: 2021-05-07
- Posts: 10
Re: Xorg refuses to start after update.
The output of "modinfo nvidia" is as follows.
modinfo: ERROR: Module nvidia not found.The output of "dmesg"
[ 11.871] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 11.873]
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[ 11.873] Build Operating System: Linux Archlinux
[ 11.873] Current Operating System: Linux arch 5.12.1-arch1-1 #1 SMP PREEMPT Sun, 02 May 2021 12:43:58 +0000 x86_64
[ 11.873] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c58a25dc-1330-4b8b-a295-44da1cc4835e rw loglevel=3 quiet
[ 11.873] Build Date: 13 April 2021 03:12:10PM
[ 11.873]
[ 11.873] Current version of pixman: 0.40.0
[ 11.873] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.874] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.874] (==) Log file: "/home/user1/.local/share/xorg/Xorg.0.log", Time: Fri May 7 12:08:09 2021
[ 11.888] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11.891] (==) No Layout section. Using the first Screen section.
[ 11.891] (==) No screen section available. Using defaults.
[ 11.891] (**) |-->Screen "Default Screen Section" (0)
[ 11.891] (**) | |-->Monitor "<default monitor>"
[ 11.892] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11.892] (==) Automatically adding devices
[ 11.892] (==) Automatically enabling devices
[ 11.892] (==) Automatically adding GPU devices
[ 11.892] (==) Automatically binding GPU devices
[ 11.892] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 11.892] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 11.892] Entry deleted from font path.
[ 11.893] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 11.893] Entry deleted from font path.
[ 11.893] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 11.893] Entry deleted from font path.
[ 11.913] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 11.913] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.913] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11.913] (II) Module ABI versions:
[ 11.913] X.Org ANSI C Emulation: 0.4
[ 11.913] X.Org Video Driver: 24.1
[ 11.913] X.Org XInput driver : 24.1
[ 11.913] X.Org Server Extension : 10.0
[ 11.914] (++) using VT number 1
[ 11.915] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 11.916] (--) PCI:*(1@0:0:0) 10de:1c81:1458:3765 rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 11.916] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11.916] (II) LoadModule: "glx"
[ 11.928] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.950] (II) Module glx: vendor="X.Org Foundation"
[ 11.950] compiled for 1.20.11, module version = 1.0.0
[ 11.950] ABI class: X.Org Server Extension, version 10.0
[ 11.950] (==) Matched nouveau as autoconfigured driver 0
[ 11.950] (==) Matched nv as autoconfigured driver 1
[ 11.950] (==) Matched modesetting as autoconfigured driver 2
[ 11.950] (==) Matched fbdev as autoconfigured driver 3
[ 11.950] (==) Matched vesa as autoconfigured driver 4
[ 11.950] (==) Assigned the driver to the xf86ConfigLayout
[ 11.950] (II) LoadModule: "nouveau"
[ 11.956] (WW) Warning, couldn't open module nouveau
[ 11.956] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 11.956] (II) LoadModule: "nv"
[ 11.956] (WW) Warning, couldn't open module nv
[ 11.956] (EE) Failed to load module "nv" (module does not exist, 0)
[ 11.956] (II) LoadModule: "modesetting"
[ 11.956] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 11.961] (II) Module modesetting: vendor="X.Org Foundation"
[ 11.961] compiled for 1.20.11, module version = 1.20.11
[ 11.961] Module class: X.Org Video Driver
[ 11.961] ABI class: X.Org Video Driver, version 24.1
[ 11.961] (II) LoadModule: "fbdev"
[ 11.962] (WW) Warning, couldn't open module fbdev
[ 11.962] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 11.962] (II) LoadModule: "vesa"
[ 11.962] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 11.973] (II) Module vesa: vendor="X.Org Foundation"
[ 11.973] compiled for 1.20.9, module version = 2.5.0
[ 11.973] Module class: X.Org Video Driver
[ 11.973] ABI class: X.Org Video Driver, version 24.1
[ 11.973] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 11.973] (II) VESA: driver for VESA chipsets: vesa
[ 11.973] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 11.973] (EE) open /dev/dri/card0: No such file or directory
[ 11.973] (WW) Falling back to old probe method for modesetting
[ 11.973] (EE) open /dev/dri/card0: No such file or directory
[ 11.973] vesa: Refusing to run on UEFI
[ 11.973] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 11.973] (EE) Screen 0 deleted because of no matching config section.
[ 11.973] (II) UnloadModule: "modesetting"
[ 11.973] (EE) Device(s) detected, but none match those in the config file.
[ 11.973] (EE)
Fatal server error:
[ 11.973] (EE) no screens found(EE)
[ 11.973] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 11.974] (EE) Please also check the log file at "/home/user1/.local/share/xorg/Xorg.0.log" for additional information.
[ 11.974] (EE)
[ 11.979] (EE) Server terminated with error (1). Closing log file.Offline
#10 2021-05-07 22:39:39
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,323
Re: Xorg refuses to start after update.
What nvidia packages are installed?
pacman -Qs nvidiaOffline
#11 2021-05-07 22:44:22
- b#QX52Et
- Member
- Registered: 2021-05-07
- Posts: 10
Re: Xorg refuses to start after update.
The output of "pacman -Qs nvidia"
local/egl-wayland 1.1.6-1
EGLStream-based Wayland external platform
local/libvdpau 1.4-1
Nvidia VDPAU library
local/nvidia 465.27-4
NVIDIA drivers for linux
local/nvidia-utils 465.27-1
NVIDIA drivers utilitiesOffline
#12 2021-05-07 22:58:24
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,323
Re: Xorg refuses to start after update.
nvidia 465.27-4 matches linux 5.12.1.arch1-1.
Please verify `uname -r` returns 5.12.1-arch1-1 if it does what is the output of:
pacman -Qkk nvidia nvidia-utils
pacman -Ql nvidia nvidia-utilsIf not what does it return?
Offline
#13 2021-05-07 23:07:52
- b#QX52Et
- Member
- Registered: 2021-05-07
- Posts: 10
Re: Xorg refuses to start after update.
"uname -r" does indeed return 5.12.1-arch1-1
the output of "pacman -Qkk nvidia nvidia-utils"
nvidia: 15 total files, 0 altered files
error: package 'nvidia-utils' was not foundthe output of "pacman -Qi nvidia nvidia-utils"
Name : nvidia
Version : 465.27-4
Description : NVIDIA drivers for linux
Architecture : x86_64
URL : https://www.nvidia.com/
Licenses : custom
Groups : None
Provides : NVIDIA-MODULE
Depends On : linux nvidia-utils=465.27 libglvnd
Optional Deps : None
Required By : None
Optional For : None
Conflicts With : None
Replaces : None
Installed Size : 23.40 MiB
Packager : Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Build Date : Sun 02 May 2021 08:17:46 AM CDT
Install Date : Fri 07 May 2021 12:58:36 AM CDT
Install Reason : Explicitly installed
Install Script : No
Validated By : Signature
error: package 'nvidia-utils' was not foundLast edited by b#QX52Et (2021-05-07 23:08:26)
Offline
#14 2021-05-07 23:13:49
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,323
Re: Xorg refuses to start after update.
Try re-installing nvidia-utils, this may well fail:
# pacman -S nvidia-utilsOffline
#15 2021-05-07 23:16:53
- b#QX52Et
- Member
- Registered: 2021-05-07
- Posts: 10
Re: Xorg refuses to start after update.
nvidia-utils re-installed without fail.
Offline
#16 2021-05-07 23:23:18
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,323
Re: Xorg refuses to start after update.
Try starting X now. The lack of nvidia-utils certainly would prevent X from using the nvidia X driver but does not explain why modinfo could not find the nvidia kernel module.
If it still fails please post the output of dmesg, not Xorg.0.log.
Offline
#17 2021-05-07 23:31:33
- b#QX52Et
- Member
- Registered: 2021-05-07
- Posts: 10
Re: Xorg refuses to start after update.
Xorg is still refusing to launch. Here is the output of dmesg.
[ 0.000000] Linux version 5.12.1-arch1-1 (linux@archlinux) (gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Sun, 02 May 2021 12:43:58 +0000
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c58a25dc-1330-4b8b-a295-44da1cc4835e rw loglevel=3 quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000081b14fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000081b15000-0x0000000081b15fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000081b16000-0x0000000081b3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000081b40000-0x0000000081b90fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000081b91000-0x000000008210dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008210e000-0x0000000086fb8fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000086fb9000-0x00000000872bbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000872bc000-0x0000000087479fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008747a000-0x0000000087acafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000087acb000-0x0000000087fa7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000087fa8000-0x0000000087ffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000087fff000-0x0000000087ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000088000000-0x00000000880fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003767fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ESRT=0x87eeff98 ACPI=0x87a8c000 ACPI 2.0=0x87a8c000 SMBIOS=0xf05e0
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H110M-DGS R3.0, BIOS P7.10 07/18/2017
[ 0.000000] tsc: Detected 3000.000 MHz processor
[ 0.000599] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000602] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000608] last_pfn = 0x376800 max_arch_pfn = 0x400000000
[ 0.000701] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001261] last_pfn = 0x88000 max_arch_pfn = 0x400000000
[ 0.007796] found SMP MP-table at [mem 0x000fc670-0x000fc67f]
[ 0.007808] esrt: Reserving ESRT space from 0x0000000087eeff98 to 0x0000000087eeffd0.
[ 0.007815] check: Scanning 1 areas for low memory corruption
[ 0.007821] Using GB pages for direct mapping
[ 0.008216] Secure boot could not be determined
[ 0.008216] RAMDISK: [mem 0x370c1000-0x37857fff]
[ 0.008219] ACPI: Early table checksum verification disabled
[ 0.008221] ACPI: RSDP 0x0000000087A8C000 000024 (v02 ALASKA)
[ 0.008225] ACPI: XSDT 0x0000000087A8C098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008230] ACPI: FACP 0x0000000087AACA90 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.008234] ACPI: DSDT 0x0000000087A8C1D8 0208B1 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.008237] ACPI: FACS 0x0000000087ACAF80 000040
[ 0.008240] ACPI: APIC 0x0000000087AACBA0 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.008242] ACPI: FPDT 0x0000000087AACC28 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008245] ACPI: FIDT 0x0000000087AACC70 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008247] ACPI: MCFG 0x0000000087AACD10 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.008250] ACPI: HPET 0x0000000087AACD50 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
[ 0.008253] ACPI: SSDT 0x0000000087AACD88 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.008256] ACPI: LPIT 0x0000000087AAD0F8 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.008258] ACPI: DBGP 0x0000000087AAD190 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.008261] ACPI: DBG2 0x0000000087AAD1C8 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.008264] ACPI: SSDT 0x0000000087AAD220 000614 (v02 INTEL xh_rvp08 00000000 INTL 20120913)
[ 0.008266] ACPI: SSDT 0x0000000087AAD838 00525D (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.008269] ACPI: UEFI 0x0000000087AB2A98 000042 (v01 00000000 00000000)
[ 0.008272] ACPI: SSDT 0x0000000087AB2AE0 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.008274] ACPI: BGRT 0x0000000087AB3938 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008277] ACPI: DMAR 0x0000000087AB3970 000070 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.008280] ACPI: AAFT 0x0000000087AB39E0 000219 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.008282] ACPI: Reserving FACP table memory at [mem 0x87aaca90-0x87aacb9b]
[ 0.008283] ACPI: Reserving DSDT table memory at [mem 0x87a8c1d8-0x87aaca88]
[ 0.008284] ACPI: Reserving FACS table memory at [mem 0x87acaf80-0x87acafbf]
[ 0.008285] ACPI: Reserving APIC table memory at [mem 0x87aacba0-0x87aacc23]
[ 0.008286] ACPI: Reserving FPDT table memory at [mem 0x87aacc28-0x87aacc6b]
[ 0.008287] ACPI: Reserving FIDT table memory at [mem 0x87aacc70-0x87aacd0b]
[ 0.008288] ACPI: Reserving MCFG table memory at [mem 0x87aacd10-0x87aacd4b]
[ 0.008289] ACPI: Reserving HPET table memory at [mem 0x87aacd50-0x87aacd87]
[ 0.008290] ACPI: Reserving SSDT table memory at [mem 0x87aacd88-0x87aad0f4]
[ 0.008291] ACPI: Reserving LPIT table memory at [mem 0x87aad0f8-0x87aad18b]
[ 0.008291] ACPI: Reserving DBGP table memory at [mem 0x87aad190-0x87aad1c3]
[ 0.008292] ACPI: Reserving DBG2 table memory at [mem 0x87aad1c8-0x87aad21b]
[ 0.008293] ACPI: Reserving SSDT table memory at [mem 0x87aad220-0x87aad833]
[ 0.008294] ACPI: Reserving SSDT table memory at [mem 0x87aad838-0x87ab2a94]
[ 0.008295] ACPI: Reserving UEFI table memory at [mem 0x87ab2a98-0x87ab2ad9]
[ 0.008296] ACPI: Reserving SSDT table memory at [mem 0x87ab2ae0-0x87ab3937]
[ 0.008297] ACPI: Reserving BGRT table memory at [mem 0x87ab3938-0x87ab396f]
[ 0.008298] ACPI: Reserving DMAR table memory at [mem 0x87ab3970-0x87ab39df]
[ 0.008298] ACPI: Reserving AAFT table memory at [mem 0x87ab39e0-0x87ab3bf8]
[ 0.008306] ACPI: Local APIC address 0xfee00000
[ 0.008397] No NUMA configuration found
[ 0.008398] Faking a node at [mem 0x0000000000000000-0x00000003767fffff]
[ 0.008401] NODE_DATA(0) allocated [mem 0x3767fc000-0x3767fffff]
[ 0.008424] Zone ranges:
[ 0.008424] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008426] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008428] Normal [mem 0x0000000100000000-0x00000003767fffff]
[ 0.008429] Device empty
[ 0.008430] Movable zone start for each node
[ 0.008431] Early memory node ranges
[ 0.008431] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.008433] node 0: [mem 0x0000000000059000-0x000000000009ffff]
[ 0.008434] node 0: [mem 0x0000000000100000-0x0000000081b14fff]
[ 0.008435] node 0: [mem 0x0000000081b40000-0x0000000081b90fff]
[ 0.008436] node 0: [mem 0x000000008210e000-0x0000000086fb8fff]
[ 0.008436] node 0: [mem 0x00000000872bc000-0x0000000087479fff]
[ 0.008437] node 0: [mem 0x0000000087fff000-0x0000000087ffffff]
[ 0.008438] node 0: [mem 0x0000000100000000-0x00000003767fffff]
[ 0.008440] Initmem setup node 0 [mem 0x0000000000001000-0x00000003767fffff]
[ 0.008441] On node 0 totalpages: 3134318
[ 0.008442] DMA zone: 64 pages used for memmap
[ 0.008443] DMA zone: 46 pages reserved
[ 0.008444] DMA zone: 3998 pages, LIFO batch:0
[ 0.008631] DMA zone: 28770 pages in unavailable ranges
[ 0.008633] DMA32 zone: 8560 pages used for memmap
[ 0.008634] DMA32 zone: 547792 pages, LIFO batch:63
[ 0.011394] DMA32 zone: 5168 pages in unavailable ranges
[ 0.011396] Normal zone: 40352 pages used for memmap
[ 0.011396] Normal zone: 2582528 pages, LIFO batch:63
[ 0.023607] Normal zone: 6144 pages in unavailable ranges
[ 0.023759] ACPI: PM-Timer IO Port: 0x1808
[ 0.023761] ACPI: Local APIC address 0xfee00000
[ 0.023765] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.023767] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.023768] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.023769] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.023794] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.023797] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.023799] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.023800] ACPI: IRQ0 used by override.
[ 0.023802] ACPI: IRQ9 used by override.
[ 0.023803] Using ACPI (MADT) for SMP configuration information
[ 0.023804] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.023809] e820: update [mem 0x856e4000-0x85724fff] usable ==> reserved
[ 0.023818] TSC deadline timer available
[ 0.023819] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.023834] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.023836] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.023838] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.023839] PM: hibernation: Registered nosave memory: [mem 0x81b15000-0x81b15fff]
[ 0.023840] PM: hibernation: Registered nosave memory: [mem 0x81b16000-0x81b3ffff]
[ 0.023842] PM: hibernation: Registered nosave memory: [mem 0x81b91000-0x8210dfff]
[ 0.023843] PM: hibernation: Registered nosave memory: [mem 0x856e4000-0x85724fff]
[ 0.023845] PM: hibernation: Registered nosave memory: [mem 0x86fb9000-0x872bbfff]
[ 0.023846] PM: hibernation: Registered nosave memory: [mem 0x8747a000-0x87acafff]
[ 0.023847] PM: hibernation: Registered nosave memory: [mem 0x87acb000-0x87fa7fff]
[ 0.023847] PM: hibernation: Registered nosave memory: [mem 0x87fa8000-0x87ffefff]
[ 0.023849] PM: hibernation: Registered nosave memory: [mem 0x88000000-0x880fffff]
[ 0.023850] PM: hibernation: Registered nosave memory: [mem 0x88100000-0xdfffffff]
[ 0.023850] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.023851] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.023852] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.023852] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.023853] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.023854] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.023854] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.023855] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.023856] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.023857] [mem 0x88100000-0xdfffffff] available for PCI devices
[ 0.023858] Booting paravirtualized kernel on bare hardware
[ 0.023860] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.028219] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[ 0.028338] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u524288
[ 0.028344] pcpu-alloc: s192512 r8192 d28672 u524288 alloc=1*2097152
[ 0.028346] pcpu-alloc: [0] 0 1 2 3
[ 0.028363] Built 1 zonelists, mobility grouping on. Total pages: 3085296
[ 0.028364] Policy zone: Normal
[ 0.028365] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c58a25dc-1330-4b8b-a295-44da1cc4835e rw loglevel=3 quiet
[ 0.029076] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.029408] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.029538] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[ 0.052640] Memory: 12155700K/12537272K available (14344K kernel code, 2040K rwdata, 8988K rodata, 1652K init, 4348K bss, 381312K reserved, 0K cma-reserved)
[ 0.052646] random: get_random_u64 called from __kmem_cache_create+0x22/0x530 with crng_init=0
[ 0.052727] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.052737] Kernel/User page tables isolation: enabled
[ 0.052752] ftrace: allocating 41952 entries in 164 pages
[ 0.064541] ftrace: allocated 164 pages with 3 groups
[ 0.064615] rcu: Preemptible hierarchical RCU implementation.
[ 0.064616] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.064616] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.064617] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.064618] Trampoline variant of Tasks RCU enabled.
[ 0.064619] Rude variant of Tasks RCU enabled.
[ 0.064619] Tracing variant of Tasks RCU enabled.
[ 0.064620] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.064621] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.067598] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 16
[ 0.067940] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.067998] spurious 8259A interrupt: IRQ7.
[ 0.068020] Console: colour dummy device 80x25
[ 0.068031] printk: console [tty0] enabled
[ 0.068044] ACPI: Core revision 20210105
[ 0.068249] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.068345] APIC: Switch to symmetric I/O mode setup
[ 0.068347] DMAR: Host address width 39
[ 0.068348] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.068353] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.068354] DMAR: RMRR base: 0x0000008705e000 end: 0x0000008707dfff
[ 0.068357] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.068358] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 0.068360] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.068360] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.069681] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.069682] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.073598] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088288] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b3e459bf4c, max_idle_ns: 440795289890 ns
[ 0.088293] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.00 BogoMIPS (lpj=10000000)
[ 0.088295] pid_max: default: 32768 minimum: 301
[ 0.089483] LSM: Security Framework initializing
[ 0.089487] Yama: becoming mindful.
[ 0.089492] LSM support for eBPF active
[ 0.089520] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.089541] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.089729] CPU0: Thermal monitoring enabled (TM1)
[ 0.089757] process: using mwait in idle threads
[ 0.089758] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.089759] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.089761] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.089763] Spectre V2 : Mitigation: Full generic retpoline
[ 0.089763] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.089764] Speculative Store Bypass: Vulnerable
[ 0.089766] SRBDS: Vulnerable: No microcode
[ 0.089767] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.089954] Freeing SMP alternatives memory: 36K
[ 0.090915] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1126
[ 0.090926] smpboot: CPU0: Intel(R) Core(TM) i5-7400 CPU @ 3.00GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[ 0.091051] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.091061] ... version: 4
[ 0.091062] ... bit width: 48
[ 0.091063] ... generic registers: 8
[ 0.091063] ... value mask: 0000ffffffffffff
[ 0.091064] ... max period: 00007fffffffffff
[ 0.091065] ... fixed-purpose events: 3
[ 0.091065] ... event mask: 00000007000000ff
[ 0.091153] rcu: Hierarchical SRCU implementation.
[ 0.091625] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.091625] smp: Bringing up secondary CPUs ...
[ 0.091625] x86: Booting SMP configuration:
[ 0.091625] .... node #0, CPUs: #1 #2 #3
[ 0.091625] smp: Brought up 1 node, 4 CPUs
[ 0.091625] smpboot: Max logical packages: 1
[ 0.091625] smpboot: Total of 4 processors activated (24009.00 BogoMIPS)
[ 0.091698] devtmpfs: initialized
[ 0.091698] x86/mm: Memory block size: 128MB
[ 0.092240] PM: Registering ACPI NVS region [mem 0x81b15000-0x81b15fff] (4096 bytes)
[ 0.092240] PM: Registering ACPI NVS region [mem 0x8747a000-0x87acafff] (6623232 bytes)
[ 0.092240] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.092240] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.092240] pinctrl core: initialized pinctrl subsystem
[ 0.092240] PM: RTC time: 23:27:14, date: 2021-05-07
[ 0.092240] NET: Registered protocol family 16
[ 0.092240] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.092327] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.092435] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.092442] audit: initializing netlink subsys (disabled)
[ 0.092449] audit: type=2000 audit(1620430033.023:1): state=initialized audit_enabled=0 res=1
[ 0.092449] thermal_sys: Registered thermal governor 'fair_share'
[ 0.092449] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.092449] thermal_sys: Registered thermal governor 'step_wise'
[ 0.092449] thermal_sys: Registered thermal governor 'user_space'
[ 0.092449] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.092449] cpuidle: using governor ladder
[ 0.092449] cpuidle: using governor menu
[ 0.092449] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.092449] ACPI: bus type PCI registered
[ 0.092449] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.092449] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.092449] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.092449] PCI: Using configuration type 1 for base access
[ 0.092449] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.092449] Kprobes globally optimized
[ 0.092449] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.092449] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.095028] ACPI: Added _OSI(Module Device)
[ 0.095029] ACPI: Added _OSI(Processor Device)
[ 0.095030] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.095030] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.095031] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.095032] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.095033] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.125766] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.128295] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.131059] ACPI: Dynamic OEM Table Load:
[ 0.131064] ACPI: SSDT 0xFFFF9C6480A24800 000660 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.132054] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.133654] ACPI: Dynamic OEM Table Load:
[ 0.133658] ACPI: SSDT 0xFFFF9C6480E19000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.135122] ACPI: Dynamic OEM Table Load:
[ 0.135126] ACPI: SSDT 0xFFFF9C6480A27000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.136333] ACPI: Dynamic OEM Table Load:
[ 0.136336] ACPI: SSDT 0xFFFF9C6480E1CE00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.140049] ACPI: Interpreter enabled
[ 0.140082] ACPI: (supports S0 S3 S4 S5)
[ 0.140083] ACPI: Using IOAPIC for interrupt routing
[ 0.140163] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.141091] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.145670] ACPI: PM: Power Resource [WRST] (off)
[ 0.145957] ACPI: PM: Power Resource [WRST] (off)
[ 0.146243] ACPI: PM: Power Resource [WRST] (off)
[ 0.146528] ACPI: PM: Power Resource [WRST] (off)
[ 0.146816] ACPI: PM: Power Resource [WRST] (off)
[ 0.147105] ACPI: PM: Power Resource [WRST] (off)
[ 0.147414] ACPI: PM: Power Resource [WRST] (off)
[ 0.147700] ACPI: PM: Power Resource [WRST] (off)
[ 0.147988] ACPI: PM: Power Resource [WRST] (off)
[ 0.148276] ACPI: PM: Power Resource [WRST] (off)
[ 0.148566] ACPI: PM: Power Resource [WRST] (off)
[ 0.148878] ACPI: PM: Power Resource [WRST] (off)
[ 0.149163] ACPI: PM: Power Resource [WRST] (off)
[ 0.149448] ACPI: PM: Power Resource [WRST] (off)
[ 0.149732] ACPI: PM: Power Resource [WRST] (off)
[ 0.150016] ACPI: PM: Power Resource [WRST] (off)
[ 0.150302] ACPI: PM: Power Resource [WRST] (off)
[ 0.150586] ACPI: PM: Power Resource [WRST] (off)
[ 0.150871] ACPI: PM: Power Resource [WRST] (off)
[ 0.151155] ACPI: PM: Power Resource [WRST] (off)
[ 0.161522] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.161529] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.163130] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.163132] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.163869] PCI host bridge to bus 0000:00
[ 0.163871] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.163873] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.163874] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.163876] pci_bus 0000:00: root bus resource [mem 0x88800000-0xdfffffff window]
[ 0.163877] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.163878] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.163890] pci 0000:00:00.0: [8086:591f] type 00 class 0x060000
[ 0.164062] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.164101] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.164430] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.164449] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
[ 0.164515] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.164689] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.164706] pci 0000:00:14.2: reg 0x10: [mem 0xdf32e000-0xdf32efff 64bit]
[ 0.164865] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.164880] pci 0000:00:16.0: reg 0x10: [mem 0xdf32d000-0xdf32dfff 64bit]
[ 0.164932] pci 0000:00:16.0: PME# supported from D3hot
[ 0.165107] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.165120] pci 0000:00:17.0: reg 0x10: [mem 0xdf328000-0xdf329fff]
[ 0.165127] pci 0000:00:17.0: reg 0x14: [mem 0xdf32c000-0xdf32c0ff]
[ 0.165134] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
[ 0.165141] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
[ 0.165148] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
[ 0.165154] pci 0000:00:17.0: reg 0x24: [mem 0xdf32b000-0xdf32b7ff]
[ 0.165193] pci 0000:00:17.0: PME# supported from D3hot
[ 0.165371] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[ 0.165440] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.165717] pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400
[ 0.165787] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.166053] pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100
[ 0.166308] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.166321] pci 0000:00:1f.2: reg 0x10: [mem 0xdf324000-0xdf327fff]
[ 0.166513] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.166534] pci 0000:00:1f.3: reg 0x10: [mem 0xdf320000-0xdf323fff 64bit]
[ 0.166559] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
[ 0.166605] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.166883] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.166940] pci 0000:00:1f.4: reg 0x10: [mem 0xdf32a000-0xdf32a0ff 64bit]
[ 0.167009] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
[ 0.167265] pci 0000:01:00.0: [10de:1c81] type 00 class 0x030000
[ 0.167276] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.167286] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.167295] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.167302] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.167308] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[ 0.167328] pci 0000:01:00.0: BAR 3: assigned to efifb
[ 0.167400] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[ 0.167450] pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300
[ 0.167461] pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
[ 0.167584] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.167586] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.167588] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.167591] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.167649] pci 0000:02:00.0: [1b4b:9215] type 00 class 0x010601
[ 0.167664] pci 0000:02:00.0: reg 0x10: [io 0xd050-0xd057]
[ 0.167673] pci 0000:02:00.0: reg 0x14: [io 0xd040-0xd043]
[ 0.167682] pci 0000:02:00.0: reg 0x18: [io 0xd030-0xd037]
[ 0.167690] pci 0000:02:00.0: reg 0x1c: [io 0xd020-0xd023]
[ 0.167699] pci 0000:02:00.0: reg 0x20: [io 0xd000-0xd01f]
[ 0.167708] pci 0000:02:00.0: reg 0x24: [mem 0xdf240000-0xdf2407ff]
[ 0.167716] pci 0000:02:00.0: reg 0x30: [mem 0xdf200000-0xdf23ffff pref]
[ 0.167733] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1
[ 0.167773] pci 0000:02:00.0: PME# supported from D3hot
[ 0.167936] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.167939] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.167942] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.168016] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.168035] pci 0000:03:00.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.168060] pci 0000:03:00.0: reg 0x18: [mem 0xdf104000-0xdf104fff 64bit]
[ 0.168077] pci 0000:03:00.0: reg 0x20: [mem 0xdf100000-0xdf103fff 64bit]
[ 0.168179] pci 0000:03:00.0: supports D1 D2
[ 0.168180] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.168385] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.168388] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.168390] pci 0000:00:1c.5: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.170140] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.170201] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.170259] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.170317] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.170374] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.170431] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.170488] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.170545] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.174949] iommu: Default domain type: Translated
[ 0.174976] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.174976] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.174976] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.174976] vgaarb: loaded
[ 0.175087] SCSI subsystem initialized
[ 0.175092] libata version 3.00 loaded.
[ 0.175092] ACPI: bus type USB registered
[ 0.175092] usbcore: registered new interface driver usbfs
[ 0.175092] usbcore: registered new interface driver hub
[ 0.175092] usbcore: registered new device driver usb
[ 0.175092] pps_core: LinuxPPS API ver. 1 registered
[ 0.175092] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.175092] PTP clock support registered
[ 0.175092] EDAC MC: Ver: 3.0.0
[ 0.175092] Registered efivars operations
[ 0.175092] NetLabel: Initializing
[ 0.175092] NetLabel: domain hash size = 128
[ 0.175092] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.175092] NetLabel: unlabeled traffic allowed by default
[ 0.175092] PCI: Using ACPI for IRQ routing
[ 0.203511] PCI: pci_cache_line_size set to 64 bytes
[ 0.203553] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.203568] e820: reserve RAM buffer [mem 0x81b15000-0x83ffffff]
[ 0.203569] e820: reserve RAM buffer [mem 0x81b91000-0x83ffffff]
[ 0.203570] e820: reserve RAM buffer [mem 0x856e4000-0x87ffffff]
[ 0.203571] e820: reserve RAM buffer [mem 0x86fb9000-0x87ffffff]
[ 0.203572] e820: reserve RAM buffer [mem 0x8747a000-0x87ffffff]
[ 0.203573] e820: reserve RAM buffer [mem 0x376800000-0x377ffffff]
[ 0.204986] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.204992] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.207021] clocksource: Switched to clocksource tsc-early
[ 0.211575] VFS: Disk quotas dquot_6.6.0
[ 0.211586] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.211662] pnp: PnP ACPI init
[ 0.212005] system 00:00: [io 0x0280-0x028f] has been reserved
[ 0.212008] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.212010] system 00:00: [io 0x02a0-0x02af] has been reserved
[ 0.212011] system 00:00: [io 0x02b0-0x02bf] has been reserved
[ 0.212015] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212172] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.212174] system 00:01: [io 0xffff] has been reserved
[ 0.212176] system 00:01: [io 0xffff] has been reserved
[ 0.212177] system 00:01: [io 0xffff] has been reserved
[ 0.212178] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.212179] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.212182] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212264] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.212267] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212283] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.212313] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.212316] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.212546] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.212548] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.212551] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.212553] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.212554] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.212556] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.212557] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.212559] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.212560] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.212562] system 00:05: [mem 0xdffc0000-0xdffdffff] has been reserved
[ 0.212565] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212601] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.212603] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.212605] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.212606] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.212607] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.212609] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.212610] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.212613] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212904] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.212908] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.214070] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.214073] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.214077] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.214081] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.214936] pnp: PnP ACPI: found 9 devices
[ 0.220288] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.220331] NET: Registered protocol family 2
[ 0.220430] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.220493] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.220633] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.220693] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.220747] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.220793] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.220828] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.220964] NET: Registered protocol family 1
[ 0.220968] NET: Registered protocol family 44
[ 0.220976] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.220979] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.220982] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.220984] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.220988] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.220989] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.220993] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.220998] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.221000] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.221003] pci 0000:00:1c.5: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.221009] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.221010] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.221012] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.221013] pci_bus 0000:00: resource 7 [mem 0x88800000-0xdfffffff window]
[ 0.221014] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.221015] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.221016] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[ 0.221017] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.221019] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.221020] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf2fffff]
[ 0.221021] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.221022] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
[ 0.245822] pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x730 took 24095 usecs
[ 0.245858] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.245879] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.245915] PCI: CLS 0 bytes, default 64
[ 0.245945] Trying to unpack rootfs image as initramfs...
[ 0.288684] Freeing initrd memory: 7772K
[ 0.288716] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.288717] software IO TLB: mapped [mem 0x000000007cf7d000-0x0000000080f7d000] (64MB)
[ 0.288970] check: Scanning for low memory corruption every 60 seconds
[ 0.289182] Initialise system trusted keyrings
[ 0.289189] Key type blacklist registered
[ 0.289220] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.290063] zbud: loaded
[ 0.297404] Key type asymmetric registered
[ 0.297405] Asymmetric key parser 'x509' registered
[ 0.297410] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.297431] io scheduler mq-deadline registered
[ 0.297431] io scheduler kyber registered
[ 0.297446] io scheduler bfq registered
[ 0.297702] pcieport 0000:00:01.0: PME: Signaling with IRQ 121
[ 0.297852] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[ 0.298004] pcieport 0000:00:1c.5: PME: Signaling with IRQ 123
[ 0.298066] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.298085] efifb: probing for efifb
[ 0.298101] efifb: showing boot graphics
[ 0.299144] efifb: framebuffer at 0xd1000000, using 3072k, total 3072k
[ 0.299146] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.299147] efifb: scrolling: redraw
[ 0.299147] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.299183] fbcon: Deferring console take-over
[ 0.299184] fb0: EFI VGA frame buffer device
[ 0.299431] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.299448] ACPI: button: Sleep Button [SLPB]
[ 0.299470] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.299481] ACPI: button: Power Button [PWRB]
[ 0.299499] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.301684] ACPI: button: Power Button [PWRF]
[ 0.302068] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.303376] Non-volatile memory driver v1.3
[ 0.303377] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.303378] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.303852] ahci 0000:00:17.0: version 3.0
[ 0.315047] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 0.315050] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 0.345520] scsi host0: ahci
[ 0.345745] scsi host1: ahci
[ 0.345959] scsi host2: ahci
[ 0.346083] scsi host3: ahci
[ 0.346109] ata1: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b100 irq 124
[ 0.346112] ata2: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b180 irq 124
[ 0.346113] ata3: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b200 irq 124
[ 0.346115] ata4: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b280 irq 124
[ 0.358391] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 0.358395] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 0.358816] scsi host4: ahci
[ 0.359033] scsi host5: ahci
[ 0.359282] scsi host6: ahci
[ 0.359431] scsi host7: ahci
[ 0.359461] ata5: SATA max UDMA/133 abar m2048@0xdf240000 port 0xdf240100 irq 125
[ 0.359464] ata6: SATA max UDMA/133 abar m2048@0xdf240000 port 0xdf240180 irq 125
[ 0.359466] ata7: SATA max UDMA/133 abar m2048@0xdf240000 port 0xdf240200 irq 125
[ 0.359467] ata8: SATA max UDMA/133 abar m2048@0xdf240000 port 0xdf240280 irq 125
[ 0.359486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.359492] ehci-pci: EHCI PCI platform driver
[ 0.359499] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.359501] ohci-pci: OHCI PCI platform driver
[ 0.359505] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.359530] usbcore: registered new interface driver usbserial_generic
[ 0.359533] usbserial: USB Serial support registered for generic
[ 0.359610] rtc_cmos 00:03: RTC can wake from S4
[ 0.360214] rtc_cmos 00:03: registered as rtc0
[ 0.360373] rtc_cmos 00:03: setting system clock to 2021-05-07T23:27:14 UTC (1620430034)
[ 0.360384] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.360459] intel_pstate: Intel P-state driver initializing
[ 0.360630] intel_pstate: Disabling energy efficiency optimization
[ 0.360631] intel_pstate: HWP enabled
[ 0.360657] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.360744] hid: raw HID events driver (C) Jiri Kosina
[ 0.360788] intel_pmc_core INT33A1:00: initialized
[ 0.360838] drop_monitor: Initializing network drop monitor service
[ 0.360890] Initializing XFRM netlink socket
[ 0.360967] NET: Registered protocol family 10
[ 0.365608] Segment Routing with IPv6
[ 0.365610] RPL Segment Routing with IPv6
[ 0.365630] NET: Registered protocol family 17
[ 0.366019] microcode: sig=0x906e9, pf=0x2, revision=0x5e
[ 0.366055] microcode: Microcode Update Driver: v2.2.
[ 0.366060] IPI shorthand broadcast: enabled
[ 0.366071] sched_clock: Marking stable (365520409, 412129)->(371094071, -5161533)
[ 0.366203] registered taskstats version 1
[ 0.366213] Loading compiled-in X.509 certificates
[ 0.369191] Loaded X.509 cert 'Build time autogenerated kernel key: be58a462f143e89e86f5e2396e34dbf5ed014d41'
[ 0.369433] zswap: loaded using pool lz4/z3fold
[ 0.369591] Key type ._fscrypt registered
[ 0.369594] Key type .fscrypt registered
[ 0.369595] Key type fscrypt-provisioning registered
[ 0.370793] PM: Magic number: 5:885:503
[ 0.370963] RAS: Correctable Errors collector initialized.
[ 0.661712] ata2: SATA link down (SStatus 4 SControl 300)
[ 0.661746] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.661778] ata1: SATA link down (SStatus 4 SControl 300)
[ 0.661811] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.662087] ata4.00: ATAPI: ATAPI DVD A DH16AAL, LHD3, max UDMA/100
[ 0.663053] ata4.00: configured for UDMA/100
[ 0.674609] ata3.00: ATA-8: ST500LM021-1KJ152, 0002YXM1, max UDMA/133
[ 0.674618] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 0.696601] ata3.00: configured for UDMA/133
[ 0.696834] scsi 2:0:0:0: Direct-Access ATA ST500LM021-1KJ15 YXM1 PQ: 0 ANSI: 5
[ 0.697256] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 0.697264] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 0.697284] sd 2:0:0:0: [sda] Write Protect is off
[ 0.697289] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.697318] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.699907] scsi 3:0:0:0: CD-ROM ATAPI DVD A DH16AAL LHD3 PQ: 0 ANSI: 5
[ 0.753274] sda: sda1
[ 0.768473] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.838372] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.838402] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.838431] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.838460] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.838807] ata8.00: ATA-11: SATA SSD, PAFEC2.0, max UDMA/133
[ 0.838816] ata8.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 0.839118] ata8.00: configured for UDMA/133
[ 0.839380] ata7.00: ATA-9: ST2000DM006-2DM164, CC26, max UDMA/133
[ 0.839390] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 0.840579] ata7.00: configured for UDMA/133
[ 0.875725] ata5.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[ 0.875735] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 0.875753] ata6.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[ 0.875763] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 0.935584] ata5.00: configured for UDMA/133
[ 0.935614] ata6.00: configured for UDMA/133
[ 0.935815] scsi 4:0:0:0: Direct-Access ATA ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[ 0.936253] sd 4:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 0.936262] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[ 0.936281] sd 4:0:0:0: [sdb] Write Protect is off
[ 0.936285] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.936313] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.936408] scsi 5:0:0:0: Direct-Access ATA ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[ 0.936864] sd 5:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 0.936873] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[ 0.936891] sd 5:0:0:0: [sdc] Write Protect is off
[ 0.936896] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 0.936931] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.936968] scsi 6:0:0:0: Direct-Access ATA ST2000DM006-2DM1 CC26 PQ: 0 ANSI: 5
[ 0.937417] scsi 7:0:0:0: Direct-Access ATA SATA SSD C2.0 PQ: 0 ANSI: 5
[ 0.937485] sd 6:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 0.937494] sd 6:0:0:0: [sdd] 4096-byte physical blocks
[ 0.937513] sd 6:0:0:0: [sdd] Write Protect is off
[ 0.937518] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 0.937546] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.937846] sd 7:0:0:0: [sde] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 0.937869] sd 7:0:0:0: [sde] Write Protect is off
[ 0.937875] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 0.937903] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.939923] sde: sde1 sde2 sde3
[ 0.943071] sdb: sdb1
[ 0.946328] sdc: sdc1
[ 0.955146] sd 7:0:0:0: [sde] Attached SCSI removable disk
[ 0.956220] sdd: sdd1
[ 0.965152] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 0.965196] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 0.975141] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 0.978042] Freeing unused decrypted memory: 2036K
[ 0.978678] Freeing unused kernel image (initmem) memory: 1652K
[ 0.978774] Write protecting the kernel read-only data: 26624k
[ 0.979913] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 0.980475] Freeing unused kernel image (rodata/data gap) memory: 1252K
[ 1.023710] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.023713] rodata_test: all tests were successful
[ 1.023715] x86/mm: Checking user space page tables
[ 1.065427] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.065438] Run /init as init process
[ 1.065439] with arguments:
[ 1.065440] /init
[ 1.065441] with environment:
[ 1.065441] HOME=/
[ 1.065442] TERM=linux
[ 1.065442] BOOT_IMAGE=/boot/vmlinuz-linux
[ 1.082162] fbcon: Taking over console
[ 1.082211] Console: switching to colour frame buffer device 128x48
[ 1.145814] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.145819] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.146890] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[ 1.147437] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12
[ 1.147440] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.147441] usb usb1: Product: xHCI Host Controller
[ 1.147442] usb usb1: Manufacturer: Linux 5.12.1-arch1-1 xhci-hcd
[ 1.147443] usb usb1: SerialNumber: 0000:00:14.0
[ 1.149702] hub 1-0:1.0: USB hub found
[ 1.149717] hub 1-0:1.0: 10 ports detected
[ 1.150686] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.150689] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.150691] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.150718] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12
[ 1.150720] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.150721] usb usb2: Product: xHCI Host Controller
[ 1.150722] usb usb2: Manufacturer: Linux 5.12.1-arch1-1 xhci-hcd
[ 1.150723] usb usb2: SerialNumber: 0000:00:14.0
[ 1.150790] hub 2-0:1.0: USB hub found
[ 1.150798] hub 2-0:1.0: 4 ports detected
[ 1.175873] sr 3:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.175883] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.242463] random: fast init done
[ 1.245604] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.268377] tsc: Refined TSC clocksource calibration: 2999.998 MHz
[ 1.268392] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e43c8763, max_idle_ns: 440795360101 ns
[ 1.268445] clocksource: Switched to clocksource tsc
[ 1.478357] usb 1-6: new high-speed USB device number 2 using xhci_hcd
[ 1.621004] usb 1-6: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.26
[ 1.621016] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.621021] usb 1-6: Product: USB2.0 Hub
[ 1.621025] usb 1-6: Manufacturer: GenesysLogic
[ 1.622152] hub 1-6:1.0: USB hub found
[ 1.622424] hub 1-6:1.0: 4 ports detected
[ 1.689399] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 1.741878] usb 2-4: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.761623] usb 2-4: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.26
[ 1.761647] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.761653] usb 2-4: Product: USB3.1 Hub
[ 1.761657] usb 2-4: Manufacturer: GenesysLogic
[ 1.763205] hub 2-4:1.0: USB hub found
[ 1.763555] hub 2-4:1.0: 4 ports detected
[ 1.881686] usb 1-9: new high-speed USB device number 3 using xhci_hcd
[ 1.971584] systemd[1]: systemd 248-5-arch running in system mode. (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 1.985067] systemd[1]: Detected architecture x86-64.
[ 1.985732] systemd[1]: Hostname set to <arch>.
[ 2.021984] usb 1-9: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 2.021996] usb 1-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.022001] usb 1-9: Product: USB 2.0 Hub
[ 2.022786] hub 1-9:1.0: USB hub found
[ 2.022821] hub 1-9:1.0: 4 ports detected
[ 2.217990] systemd[1]: Queued start job for default target Graphical Interface.
[ 2.219356] systemd[1]: Created slice system-getty.slice.
[ 2.219688] systemd[1]: Created slice system-modprobe.slice.
[ 2.219969] systemd[1]: Created slice User and Session Slice.
[ 2.220052] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.220113] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.220302] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.220359] systemd[1]: Reached target Local Encrypted Volumes.
[ 2.220404] systemd[1]: Reached target Paths.
[ 2.220421] systemd[1]: Reached target Remote File Systems.
[ 2.220432] systemd[1]: Reached target Slices.
[ 2.220461] systemd[1]: Reached target Local Verity Integrity Protected Volumes.
[ 2.220546] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.221856] systemd[1]: Listening on Process Core Dump Socket.
[ 2.222015] systemd[1]: Listening on Journal Audit Socket.
[ 2.222118] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.222228] systemd[1]: Listening on Journal Socket.
[ 2.222538] systemd[1]: Listening on udev Control Socket.
[ 2.222630] systemd[1]: Listening on udev Kernel Socket.
[ 2.223369] systemd[1]: Mounting Huge Pages File System...
[ 2.224115] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.224923] systemd[1]: Mounting Kernel Debug File System...
[ 2.225689] systemd[1]: Mounting Kernel Trace File System...
[ 2.226511] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 2.227201] systemd[1]: Starting Load Kernel Module configfs...
[ 2.227840] systemd[1]: Starting Load Kernel Module drm...
[ 2.228522] systemd[1]: Starting Load Kernel Module fuse...
[ 2.229549] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 2.229592] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 2.230966] systemd[1]: Starting Journal Service...
[ 2.233276] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
[ 2.233848] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.233893] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[ 2.234402] systemd[1]: Starting Apply Kernel Variables...
[ 2.234920] systemd[1]: Starting Coldplug All udev Devices...
[ 2.237624] Linux agpgart interface v0.103
[ 2.239143] systemd[1]: Mounted Huge Pages File System.
[ 2.239209] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.239263] systemd[1]: Mounted Kernel Debug File System.
[ 2.239315] systemd[1]: Mounted Kernel Trace File System.
[ 2.239496] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 2.239680] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 2.239809] systemd[1]: Finished Load Kernel Module configfs.
[ 2.240327] systemd[1]: Mounting Kernel Configuration File System...
[ 2.243435] systemd[1]: Mounted Kernel Configuration File System.
[ 2.243732] EXT4-fs (sde3): re-mounted. Opts: (null). Quota mode: none.
[ 2.244590] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 2.244632] audit: type=1130 audit(1620430036.378:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.244700] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[ 2.245170] fuse: init (API version 7.33)
[ 2.249238] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 2.249732] systemd[1]: Starting Load/Save Random Seed...
[ 2.250186] systemd[1]: Starting Create System Users...
[ 2.250490] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 2.250638] systemd[1]: Finished Load Kernel Module fuse.
[ 2.250678] audit: type=1130 audit(1620430036.384:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.250686] audit: type=1131 audit(1620430036.384:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.250891] systemd[1]: Finished Apply Kernel Variables.
[ 2.250911] audit: type=1130 audit(1620430036.384:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.251425] systemd[1]: Mounting FUSE Control File System...
[ 2.253497] systemd[1]: Mounted FUSE Control File System.
[ 2.269336] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 2.269520] systemd[1]: Finished Load Kernel Module drm.
[ 2.269553] audit: type=1130 audit(1620430036.404:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.269561] audit: type=1131 audit(1620430036.404:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.269627] systemd[1]: Started Journal Service.
[ 2.269787] audit: type=1130 audit(1620430036.404:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.275804] systemd-journald[210]: Received client request to flush runtime journal.
[ 2.297701] audit: type=1130 audit(1620430036.431:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.336668] audit: type=1130 audit(1620430036.471:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.421676] usb 1-9.1: new full-speed USB device number 4 using xhci_hcd
[ 2.634555] usb 1-9.1: New USB device found, idVendor=17f6, idProduct=0862, bcdDevice= 7.48
[ 2.634566] usb 1-9.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.634568] usb 1-9.1: Product: Unicomp R7_2_10x_Kbrd_v7_48
[ 2.634569] usb 1-9.1: Manufacturer: Unicomp Inc
[ 2.828301] usb 1-9.2: new full-speed USB device number 5 using xhci_hcd
[ 2.841721] Adding 10485756k swap on /dev/sde2. Priority:-2 extents:1 across:10485756k SSFS
[ 2.845222] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.846434] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 2.856565] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.857681] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 2.861681] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 2.866066] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.878318] random: crng init done
[ 2.879942] libphy: r8169: probed
[ 2.880084] r8169 0000:03:00.0 eth0: RTL8168h/8111h, 70:85:c2:6b:66:4c, XID 541, IRQ 128
[ 2.880087] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 2.889623] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 2.918677] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 2.919468] raid6: skip pq benchmark and using algorithm avx2x4
[ 2.919470] raid6: using avx2x2 recovery algorithm
[ 2.920302] iTCO_vendor_support: vendor-support=0
[ 2.920969] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 2.923092] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 2.923094] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.923094] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.923095] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.929859] xor: automatically using best checksumming function avx
[ 2.971911] async_tx: api initialized (async)
[ 2.972239] cryptd: max_cpu_qlen set to 1000
[ 3.004673] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 3.006546] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.037007] usb 1-9.2: New USB device found, idVendor=046d, idProduct=c08e, bcdDevice=40.00
[ 3.037017] usb 1-9.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.037021] usb 1-9.2: Product: MX518 Gaming Mouse
[ 3.037024] usb 1-9.2: Manufacturer: Logitech
[ 3.037027] usb 1-9.2: SerialNumber: 1272384E3934
[ 3.079311] AVX2 version of gcm_enc/dec engaged.
[ 3.079376] AES CTR mode by8 optimization enabled
[ 3.084325] md/raid:md0: device sdd1 operational as raid disk 1
[ 3.084331] md/raid:md0: device sdc1 operational as raid disk 2
[ 3.084333] md/raid:md0: device sdb1 operational as raid disk 0
[ 3.087772] md/raid:md0: raid level 5 active with 3 out of 3 devices, algorithm 2
[ 3.088932] input: Unicomp Inc Unicomp R7_2_10x_Kbrd_v7_48 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1:1.0/0003:17F6:0862.0001/input/input4
[ 3.097814] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 3.098749] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 3.098761] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 3.125175] md0: detected capacity change from 0 to 7813525504
[ 3.138188] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
[ 3.145293] hid-generic 0003:17F6:0862.0001: input,hidraw0: USB HID v1.11 Keyboard [Unicomp Inc Unicomp R7_2_10x_Kbrd_v7_48] on usb-0000:00:14.0-9.1/input0
[ 3.145333] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[ 3.145416] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[ 3.145487] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[ 3.145558] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[ 3.145626] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 3.146280] input: Logitech MX518 Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:046D:C08E.0002/input/input11
[ 3.146377] hid-generic 0003:046D:C08E.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech MX518 Gaming Mouse] on usb-0000:00:14.0-9.2/input0
[ 3.147853] input: Logitech MX518 Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.1/0003:046D:C08E.0003/input/input12
[ 3.191395] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 3.191401] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 3.191403] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.191405] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 3.191406] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 3.191407] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 3.191408] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 3.191410] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 3.201863] hid-generic 0003:046D:C08E.0003: input,hiddev96,hidraw2: USB HID v1.11 Keyboard [Logitech MX518 Gaming Mouse] on usb-0000:00:14.0-9.2/input1
[ 3.201902] usbcore: registered new interface driver usbhid
[ 3.201903] usbhid: USB HID core driver
[ 3.204807] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 3.204837] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 3.204866] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 3.204890] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 3.204914] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 3.226323] mousedev: PS/2 mouse device common for all mice
[ 3.294144] intel_rapl_common: Found RAPL domain package
[ 3.294146] intel_rapl_common: Found RAPL domain core
[ 3.294148] intel_rapl_common: Found RAPL domain dram
[ 3.513016] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 3.662520] nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
[ 3.689535] 8021q: 802.1Q VLAN Support v1.8
[ 3.745778] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.747817] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.748147] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.748150] cfg80211: failed to load regulatory.db
[ 3.801711] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver (mii_bus:phy_addr=r8169-300:00, irq=MAC)
[ 3.925102] r8169 0000:03:00.0 enp3s0: Link is Down
[ 7.322345] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 7.322372] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 8.541336] kauditd_printk_skb: 33 callbacks suppressed
[ 8.541338] audit: type=1100 audit(1620430042.674:40): pid=367 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="yxax" exe="/usr/bin/login" hostname=arch addr=? terminal=/dev/tty1 res=success'
[ 8.544245] audit: type=1101 audit(1620430042.678:41): pid=367 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="yxax" exe="/usr/bin/login" hostname=arch addr=? terminal=/dev/tty1 res=success'
[ 8.546787] audit: type=1103 audit(1620430042.681:42): pid=367 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="yxax" exe="/usr/bin/login" hostname=arch addr=? terminal=/dev/tty1 res=success'
[ 8.546836] audit: type=1006 audit(1620430042.681:43): pid=367 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[ 8.546839] audit: type=1300 audit(1620430042.681:43): arch=c000003e syscall=1 success=yes exit=4 a0=5 a1=7fff4cd79520 a2=4 a3=3e8 items=0 ppid=1 pid=367 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=1000 fsgid=0 tty=tty1 ses=1 comm="login" exe="/usr/bin/login" key=(null)
[ 8.546841] audit: type=1327 audit(1620430042.681:43): proctitle=2F62696E2F6C6F67696E002D70002D2D0020202020
[ 8.561303] audit: type=1130 audit(1620430042.694:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.567999] audit: type=1101 audit(1620430042.701:45): pid=386 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="yxax" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.568013] audit: type=1103 audit(1620430042.701:46): pid=386 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="yxax" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 8.568121] audit: type=1006 audit(1620430042.701:47): pid=386 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 64.299380] kauditd_printk_skb: 10 callbacks suppressed
[ 64.299383] audit: type=1100 audit(1620430098.434:54): pid=488 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="yxax" exe="/usr/bin/sudo" hostname=arch addr=? terminal=/dev/tty1 res=success'
[ 64.300322] audit: type=1101 audit(1620430098.434:55): pid=488 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="yxax" exe="/usr/bin/sudo" hostname=arch addr=? terminal=/dev/tty1 res=success'
[ 64.300794] audit: type=1110 audit(1620430098.434:56): pid=488 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=arch addr=? terminal=/dev/tty1 res=success'
[ 64.300875] audit: type=1105 audit(1620430098.434:57): pid=488 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=arch addr=? terminal=/dev/tty1 res=success'Offline
#18 2021-05-08 01:07:22
- b#QX52Et
- Member
- Registered: 2021-05-07
- Posts: 10
Re: Xorg refuses to start after update.
I ended up reinstalling which fixed the issue. Thank you for the help, sorry we could not figure out the cause of this.
Offline
#19 2021-11-24 15:56:57
- whitesalad
- Member
- Registered: 2021-11-24
- Posts: 2
Re: Xorg refuses to start after update.
I am also having this problem! After an update, I'm unable to startx.
Offline
#20 2021-11-24 16:05:30
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,039
Re: Xorg refuses to start after update.
No you dont!
…
The xorg server just received an ABI update and it is *very* likely that that is the cause of your problem. Not some weird bug (likely disk error) that somebody else had 6 months ago.
Open a new thread and post the xorg log for the failing server, https://wiki.archlinux.org/title/Xorg#General
Offline
#21 2021-12-01 13:02:20
- whitesalad
- Member
- Registered: 2021-11-24
- Posts: 2
Re: Xorg refuses to start after update.
Oh okay, I'll do that some time this week or next, thanks for the info. In the mean time, I don't know what 'ABI' means, would you be able to point me in the direction of knowing more about this update and what changed?
Offline
#22 2021-12-01 13:34:15
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,039
Re: Xorg refuses to start after update.
https://en.wikipedia.org/wiki/Applicati … _interface
xorg server went from 1.20 to 1.21 (to put that into context, you were using 1.20 since May 2018)
Offline
Pages: 1