You are not logged in.
I cant copy files from nfs server, this used to work fine a couple of kernels ago. I can browse the shares but copying stalls. BTW I am copying big files of several GB.
INFO: task nfsd:546 blocked for more than 122 seconds.
Tainted: P OE 5.12.2-zen2-1-zen #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:nfsd state:D stack: 0 pid: 546 ppid: 2 flags:0x00004000
Call Trace:
__schedule+0x334/0xcb0
schedule_preempt_disabled+0x62/0xd0
__mutex_lock.constprop.0+0x1a6/0x530
svc_tcp_sendto+0x7f/0x3c0 [sunrpc]
? svcauth_unix_release+0x51/0x60 [sunrpc]
? svcauth_unix_release+0x51/0x60 [sunrpc]
? svc_authorise+0x37/0x40 [sunrpc]
? svc_process_common+0x11b/0x710 [sunrpc]
? nfsd_svc+0x400/0x400 [nfsd]
svc_send+0x4c/0x180 [sunrpc]
nfsd+0xed/0x150 [nfsd]
? nfsd_destroy+0x60/0x60 [nfsd]
kthread+0x181/0x1b0
? __kthread_init_worker+0x50/0x50
ret_from_fork+0x22/0x30I am also seeing this, dont know if it is related:
CPU: 1 PID: 0 Comm: swapper/1 Tainted: P OE 5.12.2-zen2-1-zen #1
Hardware name: System manufacturer System Product Name/P8Z68 DELUXE, BIOS 3603 11/09/2012
Call Trace:
<IRQ>
dump_stack+0x76/0x94
__report_bad_irq+0x35/0xaa
note_interrupt.cold+0xb/0x64
handle_irq_event+0xa9/0xb0
handle_fasteoi_irq+0xb6/0x1d0
__common_interrupt+0x41/0xa0
common_interrupt+0x7e/0xa0
</IRQ>
asm_common_interrupt+0x1e/0x40
RIP: 0010:cpuidle_enter_state+0xd7/0x7a0
Code: 66 66 90 31 ff e8 29 22 79 ff 45 84 ff 74 17 9c 58 66 66 90 66 90 f6 c4 02 0f 85 44 05 00 00 31 ff e8 1d c8 80 ff fb 66 66 90 <66> 66 90 45 85 e>
RSP: 0018:ffffb386000bfea8 EFLAGS: 00000246
RAX: ffffa057d6cac7c0 RBX: ffffa057d6cb6910 RCX: 000000000000001f
RDX: 0000000000000000 RSI: 0000000025a6b8b4 RDI: 0000000000000000
RBP: 0000000000000004 R08: 000005b02adaab46 R09: 000005b06002adb6
R10: 0000000000000001 R11: 0000000000000008 R12: ffffffffa8b453e0
R13: 0000000000000004 R14: 000005b02adaab46 R15: 0000000000000000
? cpuidle_enter_state+0xb7/0x7a0
cpuidle_enter+0x29/0x40
do_idle+0x1e3/0x280
cpu_startup_entry+0x19/0x20
secondary_startup_64_no_verify+0xc2/0xcb
handlers:
[<00000000f32c63b4>] skge_intr [skge]
Disabling IRQ #19System info:
5.12.2-zen2-1-zen
Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
8GB Ram
Edit1:
I just realized that copying through ssh is very slow in the order of 50 KB/s. After a reboot I get 10MB/s, Through ssh and nfs. Will update if problem persist.
Last edited by zwa (2021-05-12 00:26:57)
Offline
Hello! I think this error has been there for a long time. There is no problem with the ssh program and the zen kernel. I have a raspberry py computer, but it doesn't work either. I got a similar error.
Offline