You are not logged in.

Pages: 1

#1 2021-07-06 10:54:33

MrSister
Member
Registered: 2015-06-10
Posts: 11

[SOLVED] External monitor not detected on boot until logout.

So, a few weeks ago I upgraded to a bigger ssd on my office laptop and did a fresh install as per usual. Same kernel, same software etc but now my external display connected via HDMI is not working upon login. The odd thing is that if I log out it automagically comes back to life and can then log back in and  work with it with no issues, which is extremely annoying to every morning.

I had been using nouveau for a while and the external screen never stopped working but found it caused a lot of flickering and other artifacts so this time I went back to nvidia. I have run nvidia drivers in the past and the experience was pretty miserable with any updates to kernel or drivers breaking the HDMI screen but when it worked everything was good enough for me.

Now, in the past I had the same issue (at least in appearance) but searching through the forums someone suggested to use a plasmashell --replace script at login, which was a nice workaround until an update fixed the issue but this time that doesn't work. I have tried to search for similar issues in the forum but couldn't find anything similar to my issue.

Since I don't really know much about display drivers I'm not  sure where to look for clues or what info or logs to post with the topic but I will provide anything that might be needed.

My laptop specs:

  • OMEN by HP Laptop 15-dc0xxx

  • Intel i7-8750H

  • NVIDIA GeForce GTX 1050 Mobile

Running:

  • linux-lts 5.10.47-1

  • linux-lts-headers 5.10.47-1

  • nvidia-lts 1:465.31-11

  • nvidia-settings 465.31-1

  • nvidia-utils 465.31-1

  • Plasma 5.22.2

Any help will be greatly appreaciated.

Thanks in advance!

Last edited by MrSister (2021-07-06 16:01:53)

Offline

#2 2021-07-06 11:57:39

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,441

Re: [SOLVED] External monitor not detected on boot until logout.

Please post "lspci" and your xorg log, but in doubt you need https://wiki.archlinux.org/title/Kernel … _KMS_start

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2021-07-06 12:20:29

MrSister
Member
Registered: 2015-06-10
Posts: 11

Re: [SOLVED] External monitor not detected on boot until logout.

lspci:

00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 07)
00:02.0 VGA compatible controller: Intel Corporation CoffeeLake-H GT2 [UHD Graphics 630]
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 07)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
00:12.0 Signal processing controller: Intel Corporation Cannon Lake PCH Thermal Controller (rev 10)
00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)
00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
00:14.3 Network controller: Intel Corporation Cannon Lake PCH CNVi WiFi (rev 10)
00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
00:17.0 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 10)
00:1d.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #9 (rev f0)
00:1d.5 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #14 (rev f0)
00:1d.7 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #16 (rev f0)
00:1f.0 ISA bridge: Intel Corporation HM470 Chipset LPC/eSPI Controller (rev 10)
00:1f.3 Audio device: Intel Corporation Cannon Lake PCH cAVS (rev 10)
00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
01:00.0 VGA compatible controller: NVIDIA Corporation GP107M [GeForce GTX 1050 Mobile] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GP107GL High Definition Audio Controller (rev a1)
02:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961/SM963
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 16)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader (rev 01)

And Xorg.0.log.old, which I assume is the log generated when cold booting, before I log out and log in again.

[     3.137] (--) Log file renamed from "/var/log/Xorg.pid-455.log" to "/var/log/Xorg.0.log"
[     3.139] 
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[     3.139] Build Operating System: Linux Archlinux
[     3.139] Current Operating System: Linux mothership 5.10.47-1-lts #1 SMP Wed, 30 Jun 2021 13:52:19 +0000 x86_64
[     3.139] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=527fddeb-cfad-4ca6-99d0-64524b1384fa rw loglevel=3 nvidia.nouveau=0
[     3.139] Build Date: 13 April 2021  03:12:10PM
[     3.139]  
[     3.139] Current version of pixman: 0.40.0
[     3.139] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     3.139] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.139] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul  6 08:51:22 2021
[     3.142] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     3.142] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     3.143] (==) No Layout section.  Using the first Screen section.
[     3.143] (==) No screen section available. Using defaults.
[     3.143] (**) |-->Screen "Default Screen Section" (0)
[     3.143] (**) |   |-->Monitor "<default monitor>"
[     3.143] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     3.143] (==) Automatically adding devices
[     3.143] (==) Automatically enabling devices
[     3.143] (==) Automatically adding GPU devices
[     3.143] (==) Automatically binding GPU devices
[     3.143] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     3.143] (WW) The directory "/usr/share/fonts/misc" does not exist.
[     3.143] 	Entry deleted from font path.
[     3.143] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     3.143] 	Entry deleted from font path.
[     3.143] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     3.143] 	Entry deleted from font path.
[     3.144] (==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[     3.144] (==) ModulePath set to "/usr/lib/xorg/modules"
[     3.144] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     3.144] (II) Module ABI versions:
[     3.144] 	X.Org ANSI C Emulation: 0.4
[     3.144] 	X.Org Video Driver: 24.1
[     3.144] 	X.Org XInput driver : 24.1
[     3.144] 	X.Org Server Extension : 10.0
[     3.144] (++) using VT number 1

[     3.144] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     3.144] (II) xfree86: Adding drm device (/dev/dri/card0)
[     3.156] (--) PCI:*(0@0:2:0) 8086:3e9b:103c:84da rev 0, Mem @ 0x82000000/16777216, 0x60000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[     3.156] (--) PCI: (1@0:0:0) 10de:1c8d:103c:84da rev 161, Mem @ 0x83000000/16777216, 0x70000000/268435456, 0x80000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[     3.156] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     3.157] (II) LoadModule: "glx"
[     3.157] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     3.162] (II) Module glx: vendor="X.Org Foundation"
[     3.162] 	compiled for 1.20.11, module version = 1.0.0
[     3.162] 	ABI class: X.Org Server Extension, version 10.0
[     3.162] (==) Matched intel as autoconfigured driver 0
[     3.162] (==) Matched modesetting as autoconfigured driver 1
[     3.162] (==) Matched fbdev as autoconfigured driver 2
[     3.162] (==) Matched vesa as autoconfigured driver 3
[     3.162] (==) Assigned the driver to the xf86ConfigLayout
[     3.162] (II) LoadModule: "intel"
[     3.163] (WW) Warning, couldn't open module intel
[     3.163] (EE) Failed to load module "intel" (module does not exist, 0)
[     3.163] (II) LoadModule: "modesetting"
[     3.163] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     3.165] (II) Module modesetting: vendor="X.Org Foundation"
[     3.165] 	compiled for 1.20.11, module version = 1.20.11
[     3.165] 	Module class: X.Org Video Driver
[     3.165] 	ABI class: X.Org Video Driver, version 24.1
[     3.165] (II) LoadModule: "fbdev"
[     3.165] (WW) Warning, couldn't open module fbdev
[     3.165] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     3.165] (II) LoadModule: "vesa"
[     3.165] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     3.165] (II) Module vesa: vendor="X.Org Foundation"
[     3.165] 	compiled for 1.20.9, module version = 2.5.0
[     3.165] 	Module class: X.Org Video Driver
[     3.165] 	ABI class: X.Org Video Driver, version 24.1
[     3.165] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     3.165] (II) VESA: driver for VESA chipsets: vesa
[     3.171] (II) modeset(0): using drv /dev/dri/card0
[     3.172] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     3.172] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[     3.172] (==) modeset(0): RGB weight 888
[     3.172] (==) modeset(0): Default visual is TrueColor
[     3.172] (II) Loading sub module "glamoregl"
[     3.172] (II) LoadModule: "glamoregl"
[     3.172] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     3.177] (II) Module glamoregl: vendor="X.Org Foundation"
[     3.177] 	compiled for 1.20.11, module version = 1.0.1
[     3.177] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     3.353] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics 630 (CFL GT2)
[     3.353] (II) modeset(0): glamor initialized
[     3.354] (II) modeset(0): Output eDP-1 has no monitor section
[     3.354] (II) modeset(0): Output DP-1 has no monitor section
[     3.390] (II) modeset(0): Output HDMI-1 has no monitor section
[     3.391] (II) modeset(0): EDID for output eDP-1
[     3.391] (II) modeset(0): Manufacturer: CMN  Model: 15e7  Serial#: 0
[     3.391] (II) modeset(0): Year: 2017  Week: 8
[     3.391] (II) modeset(0): EDID Version: 1.4
[     3.391] (II) modeset(0): Digital Display Input
[     3.391] (II) modeset(0): 6 bits per channel
[     3.391] (II) modeset(0): Digital interface is DisplayPort
[     3.391] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[     3.391] (II) modeset(0): Gamma: 2.20
[     3.391] (II) modeset(0): No DPMS capabilities specified
[     3.391] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[     3.391] (II) modeset(0): First detailed timing is preferred mode
[     3.391] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[     3.391] (II) modeset(0): redX: 0.590 redY: 0.350   greenX: 0.330 greenY: 0.555
[     3.391] (II) modeset(0): blueX: 0.153 blueY: 0.119   whiteX: 0.313 whiteY: 0.329
[     3.391] (II) modeset(0): Manufacturer's mask: 0
[     3.391] (II) modeset(0): Supported detailed timing:
[     3.391] (II) modeset(0): clock: 152.8 MHz   Image Size:  344 x 193 mm
[     3.391] (II) modeset(0): h_active: 1920  h_sync: 2000  h_sync_end 2054 h_blank_end 2250 h_border: 0
[     3.391] (II) modeset(0): v_active: 1080  v_sync: 1086  v_sync_end 1094 v_blanking: 1132 v_border: 0
[     3.391] (II) modeset(0): Supported detailed timing:
[     3.391] (II) modeset(0): clock: 101.9 MHz   Image Size:  344 x 193 mm
[     3.391] (II) modeset(0): h_active: 1920  h_sync: 2000  h_sync_end 2054 h_blank_end 2250 h_border: 0
[     3.391] (II) modeset(0): v_active: 1080  v_sync: 1086  v_sync_end 1094 v_blanking: 1132 v_border: 0
[     3.391] (II) modeset(0): Unknown vendor-specific block 2
[     3.391] (II) modeset(0): EDID (in hex):
[     3.391] (II) modeset(0): 	00ffffffffffff000daee71500000000
[     3.391] (II) modeset(0): 	081b0104952213780228659759548e27
[     3.391] (II) modeset(0): 	1e505400000001010101010101010101
[     3.391] (II) modeset(0): 	010101010101b43b804a713834405036
[     3.391] (II) modeset(0): 	680058c11000001acd27804a71383440
[     3.391] (II) modeset(0): 	5036680058c11000001a000000000000
[     3.391] (II) modeset(0): 	00000000000000000000000000000002
[     3.391] (II) modeset(0): 	000c47ff0b3c6e1314246e00000000b6
[     3.391] (II) modeset(0): Printing probed modes for output eDP-1
[     3.391] (II) modeset(0): Modeline "1920x1080"x60.0  152.84  1920 2000 2054 2250  1080 1086 1094 1132 +hsync -vsync (67.9 kHz eP)
[     3.391] (II) modeset(0): Modeline "1920x1080"x120.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[     3.391] (II) modeset(0): Modeline "1920x1080"x119.9  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[     3.391] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[     3.391] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[     3.391] (II) modeset(0): Modeline "1920x1080"x40.0  101.89  1920 2000 2054 2250  1080 1086 1094 1132 +hsync -vsync (45.3 kHz e)
[     3.391] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[     3.391] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[     3.391] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[     3.391] (II) modeset(0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[     3.391] (II) modeset(0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[     3.391] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[     3.391] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[     3.391] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[     3.391] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[     3.391] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[     3.391] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[     3.391] (II) modeset(0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[     3.391] (II) modeset(0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[     3.391] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[     3.391] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[     3.391] (II) modeset(0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[     3.391] (II) modeset(0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[     3.391] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[     3.391] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[     3.391] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[     3.391] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[     3.391] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[     3.391] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[     3.391] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[     3.391] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     3.391] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[     3.391] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[     3.391] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[     3.391] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[     3.391] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[     3.391] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[     3.391] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[     3.391] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[     3.391] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[     3.391] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[     3.391] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[     3.391] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[     3.391] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[     3.391] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[     3.391] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     3.391] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     3.391] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[     3.391] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[     3.391] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[     3.391] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[     3.391] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[     3.391] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[     3.391] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[     3.391] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[     3.391] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[     3.391] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[     3.391] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[     3.391] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     3.391] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[     3.391] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[     3.391] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[     3.391] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[     3.391] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[     3.391] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[     3.392] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[     3.392] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[     3.392] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[     3.392] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[     3.392] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[     3.392] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[     3.392] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[     3.392] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[     3.392] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[     3.392] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[     3.392] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[     3.392] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[     3.392] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[     3.392] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[     3.392] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[     3.392] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[     3.392] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[     3.392] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[     3.392] (II) modeset(0): EDID for output DP-1
[     3.429] (II) modeset(0): EDID for output HDMI-1
[     3.429] (II) modeset(0): Output eDP-1 connected
[     3.429] (II) modeset(0): Output DP-1 disconnected
[     3.429] (II) modeset(0): Output HDMI-1 disconnected
[     3.429] (II) modeset(0): Using exact sizes for initial modes
[     3.429] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[     3.429] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[     3.429] (==) modeset(0): DPI set to (96, 96)
[     3.429] (II) Loading sub module "fb"
[     3.429] (II) LoadModule: "fb"
[     3.429] (II) Loading /usr/lib/xorg/modules/libfb.so
[     3.430] (II) Module fb: vendor="X.Org Foundation"
[     3.430] 	compiled for 1.20.11, module version = 1.0.0
[     3.430] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     3.430] (II) UnloadModule: "vesa"
[     3.430] (II) Unloading vesa
[     3.456] (==) modeset(0): Backing store enabled
[     3.456] (==) modeset(0): Silken mouse disabled
[     3.538] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[     3.538] (==) modeset(0): DPMS enabled
[     3.538] (II) modeset(0): [DRI2] Setup complete
[     3.538] (II) modeset(0): [DRI2]   DRI driver: iris
[     3.538] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[     3.538] (II) Initializing extension Generic Event Extension
[     3.539] (II) Initializing extension SHAPE
[     3.539] (II) Initializing extension MIT-SHM
[     3.539] (II) Initializing extension XInputExtension
[     3.539] (II) Initializing extension XTEST
[     3.539] (II) Initializing extension BIG-REQUESTS
[     3.539] (II) Initializing extension SYNC
[     3.539] (II) Initializing extension XKEYBOARD
[     3.539] (II) Initializing extension XC-MISC
[     3.539] (II) Initializing extension SECURITY
[     3.539] (II) Initializing extension XFIXES
[     3.539] (II) Initializing extension RENDER
[     3.539] (II) Initializing extension RANDR
[     3.540] (II) Initializing extension COMPOSITE
[     3.540] (II) Initializing extension DAMAGE
[     3.540] (II) Initializing extension MIT-SCREEN-SAVER
[     3.540] (II) Initializing extension DOUBLE-BUFFER
[     3.540] (II) Initializing extension RECORD
[     3.540] (II) Initializing extension DPMS
[     3.540] (II) Initializing extension Present
[     3.540] (II) Initializing extension DRI3
[     3.540] (II) Initializing extension X-Resource
[     3.540] (II) Initializing extension XVideo
[     3.540] (II) Initializing extension XVideo-MotionCompensation
[     3.540] (II) Initializing extension GLX
[     3.547] (II) AIGLX: Loaded and initialized iris
[     3.547] (II) GLX: Initialized DRI2 GL provider for screen 0
[     3.547] (II) Initializing extension XFree86-VidModeExtension
[     3.547] (II) Initializing extension XFree86-DGA
[     3.547] (II) Initializing extension XFree86-DRI
[     3.547] (II) Initializing extension DRI2
[     3.548] (II) modeset(0): Damage tracking initialized
[     3.548] (II) modeset(0): Setting screen physical size to 508 x 285
[     3.606] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     3.606] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     3.606] (**) Power Button: Applying InputClass "system-keyboard"
[     3.606] (II) LoadModule: "libinput"
[     3.606] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     3.609] (II) Module libinput: vendor="X.Org Foundation"
[     3.609] 	compiled for 1.20.11, module version = 1.1.0
[     3.609] 	Module class: X.Org XInput Driver
[     3.609] 	ABI class: X.Org XInput driver, version 24.1
[     3.609] (II) Using input driver 'libinput' for 'Power Button'
[     3.609] (**) Power Button: always reports core events
[     3.609] (**) Option "Device" "/dev/input/event2"
[     3.609] (**) Option "_source" "server/udev"
[     3.613] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     3.613] (II) event2  - Power Button: device is a keyboard
[     3.613] (II) event2  - Power Button: device removed
[     3.701] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     3.701] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     3.701] (**) Option "xkb_layout" "us"
[     3.702] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     3.702] (II) event2  - Power Button: device is a keyboard
[     3.702] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[     3.702] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     3.702] (**) Video Bus: Applying InputClass "system-keyboard"
[     3.702] (II) Using input driver 'libinput' for 'Video Bus'
[     3.702] (**) Video Bus: always reports core events
[     3.702] (**) Option "Device" "/dev/input/event7"
[     3.702] (**) Option "_source" "server/udev"
[     3.703] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[     3.703] (II) event7  - Video Bus: device is a keyboard
[     3.703] (II) event7  - Video Bus: device removed
[     3.901] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event7"
[     3.901] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     3.901] (**) Option "xkb_layout" "us"
[     3.901] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[     3.901] (II) event7  - Video Bus: device is a keyboard
[     3.902] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[     3.902] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     3.902] (**) Video Bus: Applying InputClass "system-keyboard"
[     3.902] (II) Using input driver 'libinput' for 'Video Bus'
[     3.902] (**) Video Bus: always reports core events
[     3.902] (**) Option "Device" "/dev/input/event8"
[     3.902] (**) Option "_source" "server/udev"
[     3.903] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[     3.903] (II) event8  - Video Bus: device is a keyboard
[     3.903] (II) event8  - Video Bus: device removed
[     4.051] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input10/event8"
[     4.051] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     4.051] (**) Option "xkb_layout" "us"
[     4.051] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[     4.051] (II) event8  - Video Bus: device is a keyboard
[     4.052] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     4.052] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.052] (**) Power Button: Applying InputClass "system-keyboard"
[     4.052] (II) Using input driver 'libinput' for 'Power Button'
[     4.052] (**) Power Button: always reports core events
[     4.052] (**) Option "Device" "/dev/input/event1"
[     4.052] (**) Option "_source" "server/udev"
[     4.052] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     4.052] (II) event1  - Power Button: device is a keyboard
[     4.052] (II) event1  - Power Button: device removed
[     4.141] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     4.141] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[     4.141] (**) Option "xkb_layout" "us"
[     4.141] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     4.141] (II) event1  - Power Button: device is a keyboard
[     4.142] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     4.142] (II) No input driver specified, ignoring this device.
[     4.142] (II) This device may have been added with another device file.
[     4.142] (II) config/udev: Adding drm device (/dev/dri/card1)
[     4.142] (II) xfree86: Adding drm device (/dev/dri/card1)
[     4.142] (II) LoadModule: "modesetting"
[     4.142] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     4.142] (II) Module modesetting: vendor="X.Org Foundation"
[     4.142] 	compiled for 1.20.11, module version = 1.20.11
[     4.142] 	Module class: X.Org Video Driver
[     4.142] 	ABI class: X.Org Video Driver, version 24.1
[     4.142] (II) UnloadModule: "modesetting"
[     4.142] (II) Unloading modesetting
[     4.142] (II) Failed to load module "modesetting" (already loaded, 0)
[     4.142] xf86: found device 1
[     4.142] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event9)
[     4.142] (II) No input driver specified, ignoring this device.
[     4.142] (II) This device may have been added with another device file.
[     4.143] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[     4.143] (II) No input driver specified, ignoring this device.
[     4.143] (II) This device may have been added with another device file.
[     4.143] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[     4.143] (II) No input driver specified, ignoring this device.
[     4.143] (II) This device may have been added with another device file.
[     4.143] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[     4.143] (II) No input driver specified, ignoring this device.
[     4.143] (II) This device may have been added with another device file.
[     4.143] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event13)
[     4.143] (II) No input driver specified, ignoring this device.
[     4.143] (II) This device may have been added with another device file.
[     4.144] (II) config/udev: Adding input device Cooler Master Technology Inc. MasterKeys Pro L (/dev/input/event23)
[     4.144] (**) Cooler Master Technology Inc. MasterKeys Pro L: Applying InputClass "libinput keyboard catchall"
[     4.144] (**) Cooler Master Technology Inc. MasterKeys Pro L: Applying InputClass "system-keyboard"
[     4.144] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. MasterKeys Pro L'
[     4.144] (**) Cooler Master Technology Inc. MasterKeys Pro L: always reports core events
[     4.144] (**) Option "Device" "/dev/input/event23"
[     4.144] (**) Option "_source" "server/udev"
[     4.145] (II) event23 - Cooler Master Technology Inc. MasterKeys Pro L: is tagged by udev as: Keyboard
[     4.145] (II) event23 - Cooler Master Technology Inc. MasterKeys Pro L: device is a keyboard
[     4.145] (II) event23 - Cooler Master Technology Inc. MasterKeys Pro L: device removed
[     4.221] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:2516:003B.0001/input/input25/event23"
[     4.221] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. MasterKeys Pro L" (type: KEYBOARD, id 10)
[     4.221] (**) Option "xkb_layout" "us"
[     4.222] (II) event23 - Cooler Master Technology Inc. MasterKeys Pro L: is tagged by udev as: Keyboard
[     4.222] (II) event23 - Cooler Master Technology Inc. MasterKeys Pro L: device is a keyboard
[     4.222] (II) config/udev: Adding input device Cooler Master Technology Inc. MasterKeys Pro L System Control (/dev/input/event26)
[     4.222] (**) Cooler Master Technology Inc. MasterKeys Pro L System Control: Applying InputClass "libinput keyboard catchall"
[     4.222] (**) Cooler Master Technology Inc. MasterKeys Pro L System Control: Applying InputClass "system-keyboard"
[     4.222] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. MasterKeys Pro L System Control'
[     4.223] (**) Cooler Master Technology Inc. MasterKeys Pro L System Control: always reports core events
[     4.223] (**) Option "Device" "/dev/input/event26"
[     4.223] (**) Option "_source" "server/udev"
[     4.223] (II) event26 - Cooler Master Technology Inc. MasterKeys Pro L System Control: is tagged by udev as: Keyboard
[     4.223] (II) event26 - Cooler Master Technology Inc. MasterKeys Pro L System Control: device is a keyboard
[     4.223] (II) event26 - Cooler Master Technology Inc. MasterKeys Pro L System Control: device removed
[     4.301] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:2516:003B.0003/input/input27/event26"
[     4.301] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. MasterKeys Pro L System Control" (type: KEYBOARD, id 11)
[     4.301] (**) Option "xkb_layout" "us"
[     4.302] (II) event26 - Cooler Master Technology Inc. MasterKeys Pro L System Control: is tagged by udev as: Keyboard
[     4.302] (II) event26 - Cooler Master Technology Inc. MasterKeys Pro L System Control: device is a keyboard
[     4.302] (II) config/udev: Adding input device Cooler Master Technology Inc. MasterKeys Pro L Consumer Control (/dev/input/event27)
[     4.302] (**) Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: Applying InputClass "libinput keyboard catchall"
[     4.302] (**) Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: Applying InputClass "system-keyboard"
[     4.302] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. MasterKeys Pro L Consumer Control'
[     4.302] (**) Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: always reports core events
[     4.302] (**) Option "Device" "/dev/input/event27"
[     4.302] (**) Option "_source" "server/udev"
[     4.303] (II) event27 - Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: is tagged by udev as: Keyboard
[     4.303] (II) event27 - Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: device is a keyboard
[     4.303] (II) event27 - Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: device removed
[     4.521] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:2516:003B.0003/input/input28/event27"
[     4.521] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. MasterKeys Pro L Consumer Control" (type: KEYBOARD, id 12)
[     4.521] (**) Option "xkb_layout" "us"
[     4.522] (II) event27 - Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: is tagged by udev as: Keyboard
[     4.522] (II) event27 - Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: device is a keyboard
[     4.522] (II) config/udev: Adding input device Cooler Master Technology Inc. MasterKeys Pro L Keyboard (/dev/input/event28)
[     4.522] (**) Cooler Master Technology Inc. MasterKeys Pro L Keyboard: Applying InputClass "libinput keyboard catchall"
[     4.522] (**) Cooler Master Technology Inc. MasterKeys Pro L Keyboard: Applying InputClass "system-keyboard"
[     4.522] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. MasterKeys Pro L Keyboard'
[     4.522] (**) Cooler Master Technology Inc. MasterKeys Pro L Keyboard: always reports core events
[     4.522] (**) Option "Device" "/dev/input/event28"
[     4.522] (**) Option "_source" "server/udev"
[     4.523] (II) event28 - Cooler Master Technology Inc. MasterKeys Pro L Keyboard: is tagged by udev as: Keyboard
[     4.523] (II) event28 - Cooler Master Technology Inc. MasterKeys Pro L Keyboard: device is a keyboard
[     4.523] (II) event28 - Cooler Master Technology Inc. MasterKeys Pro L Keyboard: device removed
[     4.571] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:2516:003B.0003/input/input29/event28"
[     4.571] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. MasterKeys Pro L Keyboard" (type: KEYBOARD, id 13)
[     4.571] (**) Option "xkb_layout" "us"
[     4.572] (II) event28 - Cooler Master Technology Inc. MasterKeys Pro L Keyboard: is tagged by udev as: Keyboard
[     4.572] (II) event28 - Cooler Master Technology Inc. MasterKeys Pro L Keyboard: device is a keyboard
[     4.572] (II) config/udev: Adding input device HP Wide Vision HD Camera: HP Wi (/dev/input/event25)
[     4.572] (**) HP Wide Vision HD Camera: HP Wi: Applying InputClass "libinput keyboard catchall"
[     4.572] (**) HP Wide Vision HD Camera: HP Wi: Applying InputClass "system-keyboard"
[     4.572] (II) Using input driver 'libinput' for 'HP Wide Vision HD Camera: HP Wi'
[     4.573] (**) HP Wide Vision HD Camera: HP Wi: always reports core events
[     4.573] (**) Option "Device" "/dev/input/event25"
[     4.573] (**) Option "_source" "server/udev"
[     4.573] (II) event25 - HP Wide Vision HD Camera: HP Wi: is tagged by udev as: Keyboard
[     4.573] (II) event25 - HP Wide Vision HD Camera: HP Wi: device is a keyboard
[     4.573] (II) event25 - HP Wide Vision HD Camera: HP Wi: device removed
[     4.781] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input26/event25"
[     4.781] (II) XINPUT: Adding extended input device "HP Wide Vision HD Camera: HP Wi" (type: KEYBOARD, id 14)
[     4.781] (**) Option "xkb_layout" "us"
[     4.783] (II) event25 - HP Wide Vision HD Camera: HP Wi: is tagged by udev as: Keyboard
[     4.784] (II) event25 - HP Wide Vision HD Camera: HP Wi: device is a keyboard
[     4.785] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[     4.785] (II) No input driver specified, ignoring this device.
[     4.785] (II) This device may have been added with another device file.
[     4.785] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
[     4.785] (II) No input driver specified, ignoring this device.
[     4.785] (II) This device may have been added with another device file.
[     4.786] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event16)
[     4.786] (II) No input driver specified, ignoring this device.
[     4.786] (II) This device may have been added with another device file.
[     4.787] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event17)
[     4.787] (II) No input driver specified, ignoring this device.
[     4.787] (II) This device may have been added with another device file.
[     4.788] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event18)
[     4.788] (II) No input driver specified, ignoring this device.
[     4.788] (II) This device may have been added with another device file.
[     4.788] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event19)
[     4.788] (II) No input driver specified, ignoring this device.
[     4.788] (II) This device may have been added with another device file.
[     4.789] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event20)
[     4.789] (II) No input driver specified, ignoring this device.
[     4.789] (II) This device may have been added with another device file.
[     4.790] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event21)
[     4.790] (II) No input driver specified, ignoring this device.
[     4.790] (II) This device may have been added with another device file.
[     4.791] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[     4.791] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     4.791] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[     4.791] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     4.791] (**) AT Translated Set 2 keyboard: always reports core events
[     4.791] (**) Option "Device" "/dev/input/event3"
[     4.791] (**) Option "_source" "server/udev"
[     4.793] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     4.793] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     4.794] (II) event3  - AT Translated Set 2 keyboard: device removed
[     4.901] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[     4.901] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[     4.901] (**) Option "xkb_layout" "us"
[     4.903] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     4.903] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     4.906] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event24)
[     4.906] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[     4.906] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     4.906] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     4.906] (II) LoadModule: "synaptics"
[     4.906] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     4.907] (II) Module synaptics: vendor="X.Org Foundation"
[     4.907] 	compiled for 1.20.8, module version = 1.9.1
[     4.907] 	Module class: X.Org XInput Driver
[     4.907] 	ABI class: X.Org XInput driver, version 24.1
[     4.907] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     4.907] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     4.907] (**) Option "Device" "/dev/input/event24"
[     5.031] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1270 - 5672 (res 0)
[     5.031] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1092 - 4760 (res 0)
[     5.031] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     5.031] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     5.031] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[     5.031] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     5.031] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     5.031] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     5.161] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event24"
[     5.161] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
[     5.161] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     5.161] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[     5.161] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[     5.161] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[     5.161] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[     5.161] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     5.161] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     5.161] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     5.161] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[     5.161] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     5.162] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[     5.162] (II) No input driver specified, ignoring this device.
[     5.162] (II) This device may have been added with another device file.
[     5.162] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[     5.162] (II) No input driver specified, ignoring this device.
[     5.162] (II) This device may have been added with another device file.
[     5.162] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[     5.162] (II) No input driver specified, ignoring this device.
[     5.162] (II) This device may have been added with another device file.
[     5.164] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event22)
[     5.164] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     5.164] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"
[     5.164] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[     5.164] (**) HP WMI hotkeys: always reports core events
[     5.164] (**) Option "Device" "/dev/input/event22"
[     5.164] (**) Option "_source" "server/udev"
[     5.164] (II) event22 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[     5.164] (II) event22 - HP WMI hotkeys: device is a keyboard
[     5.164] (II) event22 - HP WMI hotkeys: device removed
[     5.261] (**) Option "config_info" "udev:/sys/devices/virtual/input/input24/event22"
[     5.261] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 17)
[     5.261] (**) Option "xkb_layout" "us"
[     5.261] (II) event22 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[     5.261] (II) event22 - HP WMI hotkeys: device is a keyboard
[     5.262] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event4)
[     5.262] (**) HP Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[     5.262] (**) HP Wireless hotkeys: Applying InputClass "system-keyboard"
[     5.262] (II) Using input driver 'libinput' for 'HP Wireless hotkeys'
[     5.262] (**) HP Wireless hotkeys: always reports core events
[     5.262] (**) Option "Device" "/dev/input/event4"
[     5.262] (**) Option "_source" "server/udev"
[     5.262] (II) event4  - HP Wireless hotkeys: is tagged by udev as: Keyboard
[     5.262] (II) event4  - HP Wireless hotkeys: device is a keyboard
[     5.262] (II) event4  - HP Wireless hotkeys: device removed
[     5.391] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event4"
[     5.391] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 18)
[     5.391] (**) Option "xkb_layout" "us"
[     5.392] (II) event4  - HP Wireless hotkeys: is tagged by udev as: Keyboard
[     5.393] (II) event4  - HP Wireless hotkeys: device is a keyboard
[     5.454] (II) config/udev: removing device Video Bus
[     5.454] (II) event7  - Video Bus: device removed
[     5.661] (II) UnloadModule: "libinput"
[     5.662] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[     5.662] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     5.662] (**) Video Bus: Applying InputClass "system-keyboard"
[     5.662] (II) Using input driver 'libinput' for 'Video Bus'
[     5.662] (**) Video Bus: always reports core events
[     5.662] (**) Option "Device" "/dev/input/event7"
[     5.662] (**) Option "_source" "server/udev"
[     5.664] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[     5.664] (II) event7  - Video Bus: device is a keyboard
[     5.664] (II) event7  - Video Bus: device removed
[     5.771] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event7"
[     5.771] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     5.771] (**) Option "xkb_layout" "us"
[     5.772] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[     5.772] (II) event7  - Video Bus: device is a keyboard
[     5.773] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[     5.773] (II) No input driver specified, ignoring this device.
[     5.773] (II) This device may have been added with another device file.
[     5.774] (II) config/udev: removing device Video Bus
[     5.774] (II) event8  - Video Bus: device removed
[     5.901] (II) UnloadModule: "libinput"
[     5.902] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[     5.902] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     5.902] (**) Video Bus: Applying InputClass "system-keyboard"
[     5.902] (II) Using input driver 'libinput' for 'Video Bus'
[     5.902] (**) Video Bus: always reports core events
[     5.902] (**) Option "Device" "/dev/input/event8"
[     5.902] (**) Option "_source" "server/udev"
[     5.904] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[     5.905] (II) event8  - Video Bus: device is a keyboard
[     5.905] (II) event8  - Video Bus: device removed
[     6.051] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input10/event8"
[     6.051] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     6.051] (**) Option "xkb_layout" "us"
[     6.054] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[     6.054] (II) event8  - Video Bus: device is a keyboard
[     6.056] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[     6.056] (II) No input driver specified, ignoring this device.
[     6.056] (II) This device may have been added with another device file.
[     6.056] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event9)
[     6.056] (II) No input driver specified, ignoring this device.
[     6.056] (II) This device may have been added with another device file.
[     6.056] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[     6.056] (II) No input driver specified, ignoring this device.
[     6.056] (II) This device may have been added with another device file.
[     6.056] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[     6.056] (II) No input driver specified, ignoring this device.
[     6.056] (II) This device may have been added with another device file.
[     6.057] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event13)
[     6.057] (II) No input driver specified, ignoring this device.
[     6.057] (II) This device may have been added with another device file.
[     6.057] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[     6.057] (II) No input driver specified, ignoring this device.
[     6.057] (II) This device may have been added with another device file.
[     6.057] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event20)
[     6.057] (II) No input driver specified, ignoring this device.
[     6.057] (II) This device may have been added with another device file.
[     6.057] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event21)
[     6.057] (II) No input driver specified, ignoring this device.
[     6.057] (II) This device may have been added with another device file.
[     6.057] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event16)
[     6.057] (II) No input driver specified, ignoring this device.
[     6.057] (II) This device may have been added with another device file.
[     6.057] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event17)
[     6.057] (II) No input driver specified, ignoring this device.
[     6.057] (II) This device may have been added with another device file.
[     6.058] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
[     6.058] (II) No input driver specified, ignoring this device.
[     6.058] (II) This device may have been added with another device file.
[     6.058] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event19)
[     6.058] (II) No input driver specified, ignoring this device.
[     6.058] (II) This device may have been added with another device file.
[     6.058] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[     6.058] (II) No input driver specified, ignoring this device.
[     6.058] (II) This device may have been added with another device file.
[     6.058] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
[     6.058] (II) config/udev: Adding drm device (/dev/dri/card1)
[     6.058] (II) xfree86: Adding drm device (/dev/dri/card1)
[     6.058] (II) LoadModule: "modesetting"
[     6.058] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     6.058] (II) Module modesetting: vendor="X.Org Foundation"
[     6.058] 	compiled for 1.20.11, module version = 1.20.11
[     6.058] 	Module class: X.Org Video Driver
[     6.058] 	ABI class: X.Org Video Driver, version 24.1
[     6.058] (II) UnloadModule: "modesetting"
[     6.058] (II) Unloading modesetting
[     6.058] (II) Failed to load module "modesetting" (already loaded, 0)
[     6.058] xf86: found device 1
[     6.058] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[     6.058] (II) No input driver specified, ignoring this device.
[     6.058] (II) This device may have been added with another device file.
[     6.058] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event18)
[     6.058] (II) No input driver specified, ignoring this device.
[     6.058] (II) This device may have been added with another device file.
[     6.059] (II) config/udev: removing device HP WMI hotkeys
[     6.059] (II) event22 - HP WMI hotkeys: device removed
[     6.141] (II) UnloadModule: "libinput"
[     6.142] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event22)
[     6.142] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     6.142] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"
[     6.142] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[     6.142] (**) HP WMI hotkeys: always reports core events
[     6.142] (**) Option "Device" "/dev/input/event22"
[     6.142] (**) Option "_source" "server/udev"
[     6.143] (II) event22 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[     6.143] (II) event22 - HP WMI hotkeys: device is a keyboard
[     6.144] (II) event22 - HP WMI hotkeys: device removed
[     6.201] (**) Option "config_info" "udev:/sys/devices/virtual/input/input24/event22"
[     6.201] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 17)
[     6.201] (**) Option "xkb_layout" "us"
[     6.203] (II) event22 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[     6.203] (II) event22 - HP WMI hotkeys: device is a keyboard
[     6.204] (II) config/udev: removing device HP Wide Vision HD Camera: HP Wi
[     6.205] (II) event25 - HP Wide Vision HD Camera: HP Wi: device removed
[     6.301] (II) UnloadModule: "libinput"
[     6.302] (II) config/udev: Adding input device HP Wide Vision HD Camera: HP Wi (/dev/input/event25)
[     6.302] (**) HP Wide Vision HD Camera: HP Wi: Applying InputClass "libinput keyboard catchall"
[     6.302] (**) HP Wide Vision HD Camera: HP Wi: Applying InputClass "system-keyboard"
[     6.302] (II) Using input driver 'libinput' for 'HP Wide Vision HD Camera: HP Wi'
[     6.302] (**) HP Wide Vision HD Camera: HP Wi: always reports core events
[     6.302] (**) Option "Device" "/dev/input/event25"
[     6.302] (**) Option "_source" "server/udev"
[     6.304] (II) event25 - HP Wide Vision HD Camera: HP Wi: is tagged by udev as: Keyboard
[     6.304] (II) event25 - HP Wide Vision HD Camera: HP Wi: device is a keyboard
[     6.305] (II) event25 - HP Wide Vision HD Camera: HP Wi: device removed
[     6.411] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input26/event25"
[     6.411] (II) XINPUT: Adding extended input device "HP Wide Vision HD Camera: HP Wi" (type: KEYBOARD, id 14)
[     6.411] (**) Option "xkb_layout" "us"
[     6.414] (II) event25 - HP Wide Vision HD Camera: HP Wi: is tagged by udev as: Keyboard
[     6.414] (II) event25 - HP Wide Vision HD Camera: HP Wi: device is a keyboard
[     6.415] (II) config/udev: removing device Cooler Master Technology Inc. MasterKeys Pro L Keyboard
[     6.416] (II) event28 - Cooler Master Technology Inc. MasterKeys Pro L Keyboard: device removed
[     6.481] (II) UnloadModule: "libinput"
[     6.482] (II) config/udev: Adding input device Cooler Master Technology Inc. MasterKeys Pro L Keyboard (/dev/input/event28)
[     6.482] (**) Cooler Master Technology Inc. MasterKeys Pro L Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.482] (**) Cooler Master Technology Inc. MasterKeys Pro L Keyboard: Applying InputClass "system-keyboard"
[     6.482] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. MasterKeys Pro L Keyboard'
[     6.482] (**) Cooler Master Technology Inc. MasterKeys Pro L Keyboard: always reports core events
[     6.482] (**) Option "Device" "/dev/input/event28"
[     6.482] (**) Option "_source" "server/udev"
[     6.484] (II) event28 - Cooler Master Technology Inc. MasterKeys Pro L Keyboard: is tagged by udev as: Keyboard
[     6.484] (II) event28 - Cooler Master Technology Inc. MasterKeys Pro L Keyboard: device is a keyboard
[     6.484] (II) event28 - Cooler Master Technology Inc. MasterKeys Pro L Keyboard: device removed
[     6.551] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:2516:003B.0003/input/input29/event28"
[     6.551] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. MasterKeys Pro L Keyboard" (type: KEYBOARD, id 13)
[     6.551] (**) Option "xkb_layout" "us"
[     6.552] (II) event28 - Cooler Master Technology Inc. MasterKeys Pro L Keyboard: is tagged by udev as: Keyboard
[     6.552] (II) event28 - Cooler Master Technology Inc. MasterKeys Pro L Keyboard: device is a keyboard
[     6.552] (II) config/udev: removing device Cooler Master Technology Inc. MasterKeys Pro L Consumer Control
[     6.552] (II) event27 - Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: device removed
[     6.771] (II) UnloadModule: "libinput"
[     6.772] (II) config/udev: Adding input device Cooler Master Technology Inc. MasterKeys Pro L Consumer Control (/dev/input/event27)
[     6.772] (**) Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: Applying InputClass "libinput keyboard catchall"
[     6.772] (**) Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: Applying InputClass "system-keyboard"
[     6.772] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. MasterKeys Pro L Consumer Control'
[     6.772] (**) Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: always reports core events
[     6.772] (**) Option "Device" "/dev/input/event27"
[     6.772] (**) Option "_source" "server/udev"
[     6.775] (II) event27 - Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: is tagged by udev as: Keyboard
[     6.776] (II) event27 - Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: device is a keyboard
[     6.776] (II) event27 - Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: device removed
[     6.891] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:2516:003B.0003/input/input28/event27"
[     6.891] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. MasterKeys Pro L Consumer Control" (type: KEYBOARD, id 12)
[     6.891] (**) Option "xkb_layout" "us"
[     6.894] (II) event27 - Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: is tagged by udev as: Keyboard
[     6.894] (II) event27 - Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: device is a keyboard
[     6.895] (II) config/udev: removing device Cooler Master Technology Inc. MasterKeys Pro L System Control
[     6.895] (II) event26 - Cooler Master Technology Inc. MasterKeys Pro L System Control: device removed
[     6.961] (II) UnloadModule: "libinput"
[     6.963] (II) config/udev: Adding input device Cooler Master Technology Inc. MasterKeys Pro L System Control (/dev/input/event26)
[     6.963] (**) Cooler Master Technology Inc. MasterKeys Pro L System Control: Applying InputClass "libinput keyboard catchall"
[     6.963] (**) Cooler Master Technology Inc. MasterKeys Pro L System Control: Applying InputClass "system-keyboard"
[     6.963] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. MasterKeys Pro L System Control'
[     6.963] (**) Cooler Master Technology Inc. MasterKeys Pro L System Control: always reports core events
[     6.963] (**) Option "Device" "/dev/input/event26"
[     6.963] (**) Option "_source" "server/udev"
[     6.966] (II) event26 - Cooler Master Technology Inc. MasterKeys Pro L System Control: is tagged by udev as: Keyboard
[     6.966] (II) event26 - Cooler Master Technology Inc. MasterKeys Pro L System Control: device is a keyboard
[     6.967] (II) event26 - Cooler Master Technology Inc. MasterKeys Pro L System Control: device removed
[     7.011] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:2516:003B.0003/input/input27/event26"
[     7.011] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. MasterKeys Pro L System Control" (type: KEYBOARD, id 11)
[     7.011] (**) Option "xkb_layout" "us"
[     7.015] (II) event26 - Cooler Master Technology Inc. MasterKeys Pro L System Control: is tagged by udev as: Keyboard
[     7.015] (II) event26 - Cooler Master Technology Inc. MasterKeys Pro L System Control: device is a keyboard
[     7.016] (II) config/udev: removing device Cooler Master Technology Inc. MasterKeys Pro L
[     7.016] (II) event23 - Cooler Master Technology Inc. MasterKeys Pro L: device removed
[     7.051] (II) UnloadModule: "libinput"
[     7.052] (II) config/udev: Adding input device Cooler Master Technology Inc. MasterKeys Pro L (/dev/input/event23)
[     7.052] (**) Cooler Master Technology Inc. MasterKeys Pro L: Applying InputClass "libinput keyboard catchall"
[     7.052] (**) Cooler Master Technology Inc. MasterKeys Pro L: Applying InputClass "system-keyboard"
[     7.052] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. MasterKeys Pro L'
[     7.052] (**) Cooler Master Technology Inc. MasterKeys Pro L: always reports core events
[     7.052] (**) Option "Device" "/dev/input/event23"
[     7.052] (**) Option "_source" "server/udev"
[     7.055] (II) event23 - Cooler Master Technology Inc. MasterKeys Pro L: is tagged by udev as: Keyboard
[     7.055] (II) event23 - Cooler Master Technology Inc. MasterKeys Pro L: device is a keyboard
[     7.056] (II) event23 - Cooler Master Technology Inc. MasterKeys Pro L: device removed
[     7.131] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:2516:003B.0001/input/input25/event23"
[     7.131] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. MasterKeys Pro L" (type: KEYBOARD, id 10)
[     7.131] (**) Option "xkb_layout" "us"
[     7.135] (II) event23 - Cooler Master Technology Inc. MasterKeys Pro L: is tagged by udev as: Keyboard
[     7.135] (II) event23 - Cooler Master Technology Inc. MasterKeys Pro L: device is a keyboard
[     7.136] (II) config/udev: removing device SynPS/2 Synaptics TouchPad
[     7.231] (II) UnloadModule: "synaptics"
[     7.232] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event24)
[     7.232] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[     7.232] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     7.232] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     7.232] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     7.232] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     7.232] (**) Option "Device" "/dev/input/event24"
[     7.311] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1270 - 5672 (res 0)
[     7.311] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1092 - 4760 (res 0)
[     7.311] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     7.311] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     7.311] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[     7.311] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     7.311] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     7.311] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     7.421] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event24"
[     7.421] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
[     7.421] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     7.421] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[     7.421] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[     7.421] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[     7.421] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[     7.421] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     7.421] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     7.422] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     7.423] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[     7.423] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     7.427] (II) config/udev: Adding input device Logitech G305 (/dev/input/mouse1)
[     7.427] (**) Logitech G305: Applying InputClass "system-keyboard"
[     7.427] (II) No input driver specified, ignoring this device.
[     7.427] (II) This device may have been added with another device file.
[     7.427] (II) config/udev: Adding input device Logitech G305 (/dev/input/event29)
[     7.427] (**) Logitech G305: Applying InputClass "libinput pointer catchall"
[     7.427] (**) Logitech G305: Applying InputClass "libinput keyboard catchall"
[     7.427] (**) Logitech G305: Applying InputClass "system-keyboard"
[     7.427] (II) Using input driver 'libinput' for 'Logitech G305'
[     7.427] (**) Logitech G305: always reports core events
[     7.427] (**) Option "Device" "/dev/input/event29"
[     7.427] (**) Option "_source" "server/udev"
[     7.428] (II) event29 - Logitech G305: is tagged by udev as: Keyboard Mouse
[     7.428] (II) event29 - Logitech G305: device is a pointer
[     7.428] (II) event29 - Logitech G305: device is a keyboard
[     7.428] (II) event29 - Logitech G305: device removed
[     7.491] (II) libinput: Logitech G305: needs a virtual subdevice
[     7.491] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3:1.2/0003:046D:C53F.0006/0003:046D:4074.0007/input/input40/event29"
[     7.491] (II) XINPUT: Adding extended input device "Logitech G305" (type: MOUSE, id 19)
[     7.491] (**) Option "AccelerationScheme" "none"
[     7.491] (**) Logitech G305: (accel) selected scheme none/0
[     7.491] (**) Logitech G305: (accel) acceleration factor: 2.000
[     7.491] (**) Logitech G305: (accel) acceleration threshold: 4
[     7.494] (II) event29 - Logitech G305: is tagged by udev as: Keyboard Mouse
[     7.494] (II) event29 - Logitech G305: device is a pointer
[     7.494] (II) event29 - Logitech G305: device is a keyboard
[     7.495] (**) Logitech G305: Applying InputClass "libinput pointer catchall"
[     7.495] (**) Logitech G305: Applying InputClass "libinput keyboard catchall"
[     7.495] (**) Logitech G305: Applying InputClass "system-keyboard"
[     7.495] (II) Using input driver 'libinput' for 'Logitech G305'
[     7.495] (**) Logitech G305: always reports core events
[     7.495] (**) Option "Device" "/dev/input/event29"
[     7.495] (**) Option "_source" "_driver/libinput"
[     7.495] (II) libinput: Logitech G305: is a virtual subdevice
[     7.495] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3:1.2/0003:046D:C53F.0006/0003:046D:4074.0007/input/input40/event29"
[     7.495] (II) XINPUT: Adding extended input device "Logitech G305" (type: KEYBOARD, id 20)
[     7.495] (**) Option "xkb_layout" "us"
[    16.246] (II) modeset(0): EDID vendor "CMN", prod id 5607
[    16.246] (II) modeset(0): Printing DDC gathered Modelines:
[    16.246] (II) modeset(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2054 2250  1080 1086 1094 1132 +hsync -vsync (67.9 kHz eP)
[    16.246] (II) modeset(0): Modeline "1920x1080"x0.0  101.89  1920 2000 2054 2250  1080 1086 1094 1132 +hsync -vsync (45.3 kHz e)
[    16.642] (II) modeset(0): EDID vendor "CMN", prod id 5607
[    16.642] (II) modeset(0): Printing DDC gathered Modelines:
[    16.642] (II) modeset(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2054 2250  1080 1086 1094 1132 +hsync -vsync (67.9 kHz eP)
[    16.642] (II) modeset(0): Modeline "1920x1080"x0.0  101.89  1920 2000 2054 2250  1080 1086 1094 1132 +hsync -vsync (45.3 kHz e)
[    29.082] (II) event2  - Power Button: device removed
[    29.151] (II) event1  - Power Button: device removed
[    29.261] (II) event3  - AT Translated Set 2 keyboard: device removed
[    29.301] (II) event4  - HP Wireless hotkeys: device removed
[    29.411] (II) event7  - Video Bus: device removed
[    29.551] (II) event8  - Video Bus: device removed
[    29.721] (II) event22 - HP WMI hotkeys: device removed
[    29.781] (II) event25 - HP Wide Vision HD Camera: HP Wi: device removed
[    29.911] (II) event28 - Cooler Master Technology Inc. MasterKeys Pro L Keyboard: device removed
[    29.981] (II) event27 - Cooler Master Technology Inc. MasterKeys Pro L Consumer Control: device removed
[    30.091] (II) event26 - Cooler Master Technology Inc. MasterKeys Pro L System Control: device removed
[    30.121] (II) event23 - Cooler Master Technology Inc. MasterKeys Pro L: device removed
[    30.251] (II) event29 - Logitech G305: device removed
[    30.299] (II) UnloadModule: "libinput"
[    30.299] (II) UnloadModule: "libinput"
[    30.299] (II) UnloadModule: "synaptics"
[    30.300] (II) UnloadModule: "libinput"
[    30.300] (II) UnloadModule: "libinput"
[    30.300] (II) UnloadModule: "libinput"
[    30.300] (II) UnloadModule: "libinput"
[    30.300] (II) UnloadModule: "libinput"
[    30.300] (II) UnloadModule: "libinput"
[    30.300] (II) UnloadModule: "libinput"
[    30.300] (II) UnloadModule: "libinput"
[    30.300] (II) UnloadModule: "libinput"
[    30.300] (II) UnloadModule: "libinput"
[    30.300] (II) UnloadModule: "libinput"
[    30.301] (II) UnloadModule: "libinput"
[    30.369] (II) Server terminated successfully (0). Closing log file.

@Seth, later today I will go over the link you shared and see if that helps.

Offline

#4 2021-07-06 12:24:47

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,441

Re: [SOLVED] External monitor not detected on boot until logout.

You're running on the intel chip, the nvidia one isn't registered but it's most likely where the output is wired - in which case adding it's modules (and i915) to the initramfs should™ do.
You probably also want drm, https://wiki.archlinux.org/title/NVIDIA … de_setting

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2021-07-06 16:01:29

MrSister
Member
Registered: 2015-06-10
Posts: 11

Re: [SOLVED] External monitor not detected on boot until logout.

@seth, adding the modules described in the link you shared plus the i915 you mentioned and then setting a pacman hook to autorun mkinitcpio on driver upgrade as desbribed here https://wiki.archlinux.org/title/NVIDIA#Pacman_hook did the trick and now the external screen works.

Though I don't understand how come in the past all I had to do was just install the nvidia driver and everything worked out of the box or why would the modules not be loaded by default unless I logged out and back in.

In any case, the problem is now fixed and the screen now works without having to do any weird shenanigans.

Thanks a lot!

Offline

#6 2021-07-06 18:52:07

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,441

Re: [SOLVED] External monitor not detected on boot until logout.

This is a race condition that afawu was caused by changes to systemd which runs the graphical.target too™ early (and is a reccuring theme since I guess now almost a year).

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1

Board footer

Powered by FluxBB