You are not logged in.
Hello I have an USB Dongle that doesn't work under Arch . Device id is 1131:1001 .
I can't bring device up via hciconfig . I get an error : Can't init device hci0: Operation not supported (95) .
I gathered some logs .
uname :
Linux exedilica 5.12.13-arch1-1 #1 SMP PREEMPT Wed, 23 Jun 2021 16:19:29 +0000 x86_64 GNU/Linuxjournal
-- Journal begins at Wed 2021-06-16 11:56:13 EEST. --
Jul 16 10:33:32 exedilica kernel: usb 3-3: USB disconnect, device number 3
Jul 16 10:33:32 exedilica systemd[445]: Stopped target Bluetooth.
Jul 16 10:33:32 exedilica systemd[1]: Starting Load/Save RF Kill Switch Status...
Jul 16 10:33:32 exedilica systemd[1]: Stopped target Bluetooth.
Jul 16 10:33:32 exedilica systemd[1]: Started Load/Save RF Kill Switch Status.
Jul 16 10:33:32 exedilica audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 16 10:33:32 exedilica kernel: audit: type=1130 audit(1626420812.232:123): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 16 10:33:37 exedilica systemd[1]: systemd-rfkill.service: Deactivated successfully.
Jul 16 10:33:37 exedilica audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 16 10:33:37 exedilica kernel: audit: type=1131 audit(1626420817.242:124): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 16 10:33:52 exedilica kernel: usb 3-3: new full-speed USB device number 4 using ohci-pci
Jul 16 10:33:52 exedilica kernel: usb 3-3: New USB device found, idVendor=1131, idProduct=1001, bcdDevice= 1.34
Jul 16 10:33:52 exedilica kernel: usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jul 16 10:33:52 exedilica kernel: usb 3-3: Product: USB demo board
Jul 16 10:33:52 exedilica kernel: usb 3-3: Manufacturer: Conwise Technology
Jul 16 10:33:52 exedilica systemd[1]: Starting Load/Save RF Kill Switch Status...
Jul 16 10:33:52 exedilica systemd[445]: Reached target Bluetooth.
Jul 16 10:33:52 exedilica systemd[1]: Started Load/Save RF Kill Switch Status.
Jul 16 10:33:52 exedilica audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 16 10:33:52 exedilica systemd[1]: Reached target Bluetooth.
Jul 16 10:33:52 exedilica kernel: audit: type=1130 audit(1626420832.619:125): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 16 10:33:57 exedilica systemd[1]: systemd-rfkill.service: Deactivated successfully.
Jul 16 10:33:57 exedilica audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 16 10:33:57 exedilica kernel: audit: type=1131 audit(1626420837.615:126): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'btmon
Bluetooth monitor ver 5.59
= Note: Linux version 5.12.13-arch1-1 (x86_64) 0.582439
= Note: Bluetooth subsystem version 2.22 0.582442
@ MGMT Open: bluetooth-meshd (privileged) version 1.19 {0x0002} 0.582444
@ MGMT Open: bluetoothd (privileged) version 1.19 {0x0001} 0.582445
= New Index: 00:00:00:00:00:00 (Primary,USB,hci0) [hci0] 4.821810
= Open Index: 00:00:00:00:00:00 [hci0] 4.821899
< HCI Command: Reset (0x03|0x0003) plen 0 #1 [hci0] 4.821948
> HCI Event: Command Complete (0x0e) plen 4 #2 [hci0] 4.933387
Reset (0x03|0x0003) ncmd 1
Status: Success (0x00)
< HCI Command: Read Local Supported Featu.. (0x04|0x0003) plen 0 #3 [hci0] 4.933473
> HCI Event: Command Complete (0x0e) plen 12 #4 [hci0] 4.935381
Read Local Supported Features (0x04|0x0003) ncmd 1
Status: Success (0x00)
Features: 0xff 0x3e 0x05 0x30 0x18 0x18 0x00 0x00
3 slot packets
5 slot packets
Encryption
Slot offset
Timing accuracy
Role switch
Hold mode
Sniff mode
Power control requests
Channel quality driven data rate (CQDDR)
SCO link
HV2 packets
HV3 packets
CVSD synchronous data
Power control
Interlaced inquiry scan
Interlaced page scan
AFH capable slave
AFH classification slave
AFH capable master
AFH classification master
< HCI Command: Read Local Version Informa.. (0x04|0x0001) plen 0 #5 [hci0] 4.935495
> HCI Event: Command Complete (0x0e) plen 12 #6 [hci0] 4.938331
Read Local Version Information (0x04|0x0001) ncmd 1
Status: Success (0x00)
HCI version: Bluetooth 2.0 (0x03) - Revision 500 (0x01f4)
LMP version: Bluetooth 2.0 (0x03) - Subversion 500 (0x01f4)
Manufacturer: Integrated System Solution Corp. (57)
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 #7 [hci0] 4.938401
> HCI Event: Command Complete (0x0e) plen 10 #8 [hci0] 4.943368
Read BD ADDR (0x04|0x0009) ncmd 1
Status: Success (0x00)
Address: 00:19:5D:0F:53:96 (ShenZhen XinHuaTong Opto Electronics Co.,Ltd)
< HCI Command: Read Buffer Size (0x04|0x0005) plen 0 #9 [hci0] 4.943533
> HCI Event: Command Complete (0x0e) plen 11 #10 [hci0] 4.945361
Read Buffer Size (0x04|0x0005) ncmd 1
Status: Success (0x00)
ACL MTU: 672 ACL max packet: 3
SCO MTU: 48 SCO max packet: 1
< HCI Command: Read Class of Device (0x03|0x0023) plen 0 #11 [hci0] 4.945450
> HCI Event: Command Complete (0x0e) plen 7 #12 [hci0] 4.949380
Read Class of Device (0x03|0x0023) ncmd 1
Status: Success (0x00)
Class: 0x2a0104
Major class: Computer (desktop, notebook, PDA, organizers)
Minor class: Desktop workstation
Networking (LAN, Ad hoc)
Capturing (Scanner, Microphone)
Audio (Speaker, Microphone, Headset)
< HCI Command: Read Local Name (0x03|0x0014) plen 0 #13 [hci0] 4.949474
> HCI Event: Command Complete (0x0e) plen 252 #14 [hci0] 4.975380
Read Local Name (0x03|0x0014) ncmd 1
Status: Success (0x00)
Name: Zetta1 Reid0
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0 #15 [hci0] 4.975450
> HCI Event: Command Complete (0x0e) plen 6 #16 [hci0] 4.978325
Read Voice Setting (0x03|0x0025) ncmd 1
Status: Success (0x00)
Setting: 0x0060
Input Coding: Linear
Input Data Format: 2's complement
Input Sample Size: 16-bit
# of bits padding at MSB: 0
Air Coding Format: CVSD
< HCI Command: Read Number of Supported... (0x03|0x0038) plen 0 #17 [hci0] 4.978387
> HCI Event: Command Complete (0x0e) plen 5 #18 [hci0] 4.980355
Read Number of Supported IAC (0x03|0x0038) ncmd 1
Status: Success (0x00)
Number of IAC: 2
< HCI Command: Read Current IAC LAP (0x03|0x0039) plen 0 #19 [hci0] 4.980405
> HCI Event: Command Complete (0x0e) plen 8 #20 [hci0] 4.982355
Read Current IAC LAP (0x03|0x0039) ncmd 1
Status: Success (0x00)
Number of IAC: 1
Access code: 0x9e8b33 (General Inquiry)
< HCI Command: Set Event Filter (0x03|0x0005) plen 1 #21 [hci0] 4.982408
Type: Clear All Filters (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #22 [hci0] 4.984383
Set Event Filter (0x03|0x0005) ncmd 1
Status: Success (0x00)
< HCI Command: Write Connection Accept T.. (0x03|0x0016) plen 2 #23 [hci0] 4.984480
Timeout: 20000.000 msec (0x7d00)
> HCI Event: Command Complete (0x0e) plen 4 #24 [hci0] 4.986328
Write Connection Accept Timeout (0x03|0x0016) ncmd 1
Status: Success (0x00)
< HCI Command: Read Local Supported Comm.. (0x04|0x0002) plen 0 #25 [hci0] 4.986437
> HCI Event: Command Complete (0x0e) plen 68 #26 [hci0] 4.993357
Read Local Supported Commands (0x04|0x0002) ncmd 1
Status: Success (0x00)
Commands: 109 entries
Inquiry (Octet 0 - Bit 0)
Inquiry Cancel (Octet 0 - Bit 1)
Periodic Inquiry Mode (Octet 0 - Bit 2)
Exit Periodic Inquiry Mode (Octet 0 - Bit 3)
Create Connection (Octet 0 - Bit 4)
Disconnect (Octet 0 - Bit 5)
Add SCO Connection (Octet 0 - Bit 6)
Accept Connection Request (Octet 1 - Bit 0)
Reject Connection Request (Octet 1 - Bit 1)
Link Key Request Reply (Octet 1 - Bit 2)
Link Key Request Negative Reply (Octet 1 - Bit 3)
PIN Code Request Reply (Octet 1 - Bit 4)
PIN Code Request Negative Reply (Octet 1 - Bit 5)
Change Connection Packet Type (Octet 1 - Bit 6)
Authentication Requested (Octet 1 - Bit 7)
Set Connection Encryption (Octet 2 - Bit 0)
Change Connection Link Key (Octet 2 - Bit 1)
Master Link Key (Octet 2 - Bit 2)
Remote Name Request (Octet 2 - Bit 3)
Read Remote Supported Features (Octet 2 - Bit 5)
Read Remote Extended Features (Octet 2 - Bit 6)
Read Remote Version Information (Octet 2 - Bit 7)
Read Clock Offset (Octet 3 - Bit 0)
Read LMP Handle (Octet 3 - Bit 1)
Hold Mode (Octet 4 - Bit 1)
Sniff Mode (Octet 4 - Bit 2)
Exit Sniff Mode (Octet 4 - Bit 3)
QoS Setup (Octet 4 - Bit 6)
Role Discovery (Octet 4 - Bit 7)
Switch Role (Octet 5 - Bit 0)
Read Link Policy Settings (Octet 5 - Bit 1)
Write Link Policy Settings (Octet 5 - Bit 2)
Read Default Link Policy Settings (Octet 5 - Bit 3)
Write Default Link Policy Settings (Octet 5 - Bit 4)
Set Event Mask (Octet 5 - Bit 6)
Reset (Octet 5 - Bit 7)
Set Event Filter (Octet 6 - Bit 0)
Flush (Octet 6 - Bit 1)
Read PIN Type (Octet 6 - Bit 2)
Write PIN Type (Octet 6 - Bit 3)
Create New Unit Key (Octet 6 - Bit 4)
Read Stored Link Key (Octet 6 - Bit 5)
Write Stored Link Key (Octet 6 - Bit 6)
Delete Stored Link Key (Octet 6 - Bit 7)
Write Local Name (Octet 7 - Bit 0)
Read Local Name (Octet 7 - Bit 1)
Read Connection Accept Timeout (Octet 7 - Bit 2)
Write Connection Accept Timeout (Octet 7 - Bit 3)
Read Page Timeout (Octet 7 - Bit 4)
Write Page Timeout (Octet 7 - Bit 5)
Read Scan Enable (Octet 7 - Bit 6)
Write Scan Enable (Octet 7 - Bit 7)
Read Page Scan Activity (Octet 8 - Bit 0)
Write Page Scan Activity (Octet 8 - Bit 1)
Read Inquiry Scan Activity (Octet 8 - Bit 2)
Write Inquiry Scan Activity (Octet 8 - Bit 3)
Read Authentication Enable (Octet 8 - Bit 4)
Write Authentication Enable (Octet 8 - Bit 5)
Read Encryption Mode (Octet 8 - Bit 6)
Write Encryption Mode (Octet 8 - Bit 7)
Read Class of Device (Octet 9 - Bit 0)
Write Class of Device (Octet 9 - Bit 1)
Read Voice Setting (Octet 9 - Bit 2)
Write Voice Setting (Octet 9 - Bit 3)
Read Automatic Flush Timeout (Octet 9 - Bit 4)
Write Automatic Flush Timeout (Octet 9 - Bit 5)
Read Num Broadcast Retransmissions (Octet 9 - Bit 6)
Write Num Broadcast Retransmissions (Octet 9 - Bit 7)
Read Hold Mode Activity (Octet 10 - Bit 0)
Write Hold Mode Activity (Octet 10 - Bit 1)
Read Transmit Power Level (Octet 10 - Bit 2)
Read Sync Flow Control Enable (Octet 10 - Bit 3)
Write Sync Flow Control Enable (Octet 10 - Bit 4)
Set Controller To Host Flow Control (Octet 10 - Bit 5)
Host Buffer Size (Octet 10 - Bit 6)
Host Number of Completed Packets (Octet 10 - Bit 7)
Read Link Supervision Timeout (Octet 11 - Bit 0)
Write Link Supervision Timeout (Octet 11 - Bit 1)
Read Number of Supported IAC (Octet 11 - Bit 2)
Read Current IAC LAP (Octet 11 - Bit 3)
Write Current IAC LAP (Octet 11 - Bit 4)
Set AFH Host Channel Classification (Octet 12 - Bit 1)
Read Inquiry Scan Type (Octet 12 - Bit 4)
Write Inquiry Scan Type (Octet 12 - Bit 5)
Read Inquiry Mode (Octet 12 - Bit 6)
Write Inquiry Mode (Octet 12 - Bit 7)
Read Page Scan Type (Octet 13 - Bit 0)
Write Page Scan Type (Octet 13 - Bit 1)
Read AFH Channel Assessment Mode (Octet 13 - Bit 2)
Write AFH Channel Assessment Mode (Octet 13 - Bit 3)
Read Local Version Information (Octet 14 - Bit 3)
Read Local Supported Commands (Octet 14 - Bit 4)
Read Local Supported Features (Octet 14 - Bit 5)
Read Local Extended Features (Octet 14 - Bit 6)
Read Buffer Size (Octet 14 - Bit 7)
Read Country Code (Octet 15 - Bit 0)
Read BD ADDR (Octet 15 - Bit 1)
Read Failed Contact Counter (Octet 15 - Bit 2)
Reset Failed Contact Counter (Octet 15 - Bit 3)
Read Link Quality (Octet 15 - Bit 4)
Read RSSI (Octet 15 - Bit 5)
Read AFH Channel Map (Octet 15 - Bit 6)
Read Clock (Octet 15 - Bit 7)
Read Loopback Mode (Octet 16 - Bit 0)
Write Loopback Mode (Octet 16 - Bit 1)
Enable Device Under Test Mode (Octet 16 - Bit 2)
Setup Synchronous Connection (Octet 16 - Bit 3)
Accept Synchronous Connection Request (Octet 16 - Bit 4)
Reject Synchronous Connection Request (Octet 16 - Bit 5)
< HCI Command: Set Event Mask (0x03|0x0001) plen 8 #27 [hci0] 4.993742
Mask: 0x00000001fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
Remote Name Request Complete
Encryption Change
Change Connection Link Key Complete
Master Link Key Complete
Read Remote Supported Features Complete
Read Remote Version Information Complete
QoS Setup Complete
Command Complete
Command Status
Hardware Error
Flush Occurred
Role Change
Mode Change
Return Link Keys
PIN Code Request
Link Key Request
Link Key Notification
Loopback Command
Data Buffer Overflow
Max Slots Change
Read Clock Offset Complete
Connection Packet Type Changed
QoS Violation
Page Scan Mode Change
Page Scan Repetition Mode Change
Flow Specification Complete
> HCI Event: Command Complete (0x0e) plen 4 #28 [hci0] 4.996363
Set Event Mask (0x03|0x0001) ncmd 1
Status: Success (0x00)
< HCI Command: Read Stored Link Key (0x03|0x000d) plen 7 #29 [hci0] 4.996410
Address: 00:00:00:00:00:00 (OUI 00-00-00)
Read all: 0x01
> HCI Event: Command Complete (0x0e) plen 8 #30 [hci0] 4.998375
Read Stored Link Key (0x03|0x000d) ncmd 1
Status: Unsupported Feature or Parameter Value (0x11)
Max num keys: 0
Num keys: 0
= Close Index: 00:19:5D:0F:53:96 [hci0] 4.99849lsusb -v -d 1131:1001:
Bus 003 Device 005: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 16
idVendor 0x1131 Integrated System Solution Corp.
idProduct 0x1001 KY-BT100 Bluetooth Adapter
bcdDevice 1.34
iManufacturer 1 Conwise Technology
iProduct 2 USB demo board
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x006c
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0000
(Bus Powered)Any help is appreciated !
Offline