Laptop RTL8723DU Wifi card Not working

sethsource · 2021-07-31 00:21:42

Fresh install of arch, latest kernel. I have a laptop with Intel Celeron N4020 and an RTL8723DU wifi chip. I did research and concluced that rtl8723de-dkms-git package from the aur might work... but every attempt to install this ends in the build failing.

Any suggestions?

Zod · 2021-07-31 00:27:04

Post a full journal?

sethsource · 2021-07-31 00:34:46

Zod wrote:

Post a full journal?

seth@seth-linux: ~ $ yasudo: a password is required
^C
seth@seth-linux: ~ $ yay -S rtl8723de-dkms-git 
:: Checking for conflicts...
:: Checking for inner conflicts...
[Repo:1]  dkms-2.8.4-1
[Aur:1]  rtl8723de-dkms-git-7b7fc22-1

:: Downloaded PKGBUILD (1/1): rtl8723de-dkms-git
  1 rtl8723de-dkms-git               (Build Files Exist)
==> Diffs to show?
==> [N]one [A]ll [Ab]ort [I]nstalled [No]tInstalled or (1 2 3, 1-3, ^4)
==> n
:: (1/1) Parsing SRCINFO: rtl8723de-dkms-git
[sudo] password for seth: 
resolving dependencies...
looking for conflicting packages...

Package (1)  New Version  Net Change  Download Size

extra/dkms   2.8.4-1        0.17 MiB       0.05 MiB

Total Download Size:   0.05 MiB
Total Installed Size:  0.17 MiB

:: Proceed with installation? [Y/n] 
:: Retrieving packages...
 dkms-2.8.4-1-any                                                           54.5 KiB   168 KiB/s 00:00 [------------------------------------------------------------] 100%
(1/1) checking keys in keyring                                                                         [------------------------------------------------------------] 100%
(1/1) checking package integrity                                                                       [------------------------------------------------------------] 100%
(1/1) loading package files                                                                            [------------------------------------------------------------] 100%
(1/1) checking for file conflicts                                                                      [------------------------------------------------------------] 100%
(1/1) checking available disk space                                                                    [------------------------------------------------------------] 100%
:: Processing package changes...
(1/1) installing dkms                                                                                  [------------------------------------------------------------] 100%
Optional dependencies for dkms
    linux-headers: build modules against the Arch kernel [installed]
    linux-lts-headers: build modules against the LTS kernel
    linux-zen-headers: build modules against the ZEN kernel
    linux-hardened-headers: build modules against the HARDENED kernel
:: Running post-transaction hooks...
(1/1) Arming ConditionNeedsUpdate...
==> Making package: rtl8723de-dkms-git 7b7fc22-1 (Fri 30 Jul 2021 11:32:32 AM MDT)
==> Retrieving sources...
  -> Cloning rtl8723de git repo...
Cloning into bare repository '/home/seth/.cache/yay/rtl8723de-dkms-git/rtl8723de'...
remote: Enumerating objects: 691, done.
remote: Counting objects: 100% (22/22), done.
remote: Compressing objects: 100% (20/20), done.
remote: Total 691 (delta 3), reused 7 (delta 2), pack-reused 669
Receiving objects: 100% (691/691), 2.65 MiB | 4.87 MiB/s, done.
Resolving deltas: 100% (266/266), done.
  -> Found dkms.conf
==> Validating source files with md5sums...
    rtl8723de ... Skipped
    dkms.conf ... Passed
 -> dkms not satisfied, flushing install queue
==> Making package: rtl8723de-dkms-git 7b7fc22-1 (Fri 30 Jul 2021 11:32:36 AM MDT)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
  -> Updating rtl8723de git repo...
Fetching origin
  -> Found dkms.conf
==> Validating source files with md5sums...
    rtl8723de ... Skipped
    dkms.conf ... Passed
==> Removing existing $srcdir/ directory...
==> Extracting sources...
  -> Creating working copy of rtl8723de git repo...
Cloning into 'rtl8723de'...
done.
==> Sources are ready.
==> Making package: rtl8723de-dkms-git 7b7fc22-1 (Fri 30 Jul 2021 11:32:42 AM MDT)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> WARNING: Using existing $srcdir/ tree
==> Starting build()...
==> Entering fakeroot environment...
==> Starting package()...
==> Tidying install...
  -> Removing libtool files...
  -> Purging unwanted files...
  -> Removing static library files...
  -> Stripping unneeded symbols from binaries and libraries...
  -> Compressing man and info pages...
==> Checking for packaging issues...
==> Creating package "rtl8723de-dkms-git"...
  -> Generating .PKGINFO file...
  -> Generating .BUILDINFO file...
  -> Generating .MTREE file...
  -> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: rtl8723de-dkms-git 7b7fc22-1 (Fri 30 Jul 2021 11:32:50 AM MDT)
==> Cleaning up...
 -> Found git repo: github.com/smlinux/rtl8723de
loading packages...
resolving dependencies...
looking for conflicting packages...

Package (1)         New Version  Net Change

rtl8723de-dkms-git  7b7fc22-1     12.63 MiB

Total Installed Size:  12.63 MiB

:: Proceed with installation? [Y/n] 
(1/1) checking keys in keyring                                                                         [------------------------------------------------------------] 100%
(1/1) checking package integrity                                                                       [------------------------------------------------------------] 100%
(1/1) loading package files                                                                            [------------------------------------------------------------] 100%
(1/1) checking for file conflicts                                                                      [------------------------------------------------------------] 100%
(1/1) checking available disk space                                                                    [------------------------------------------------------------] 100%
:: Processing package changes...
(1/1) installing rtl8723de-dkms-git                                                                    [------------------------------------------------------------] 100%
:: Running post-transaction hooks...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Install DKMS modules
==> dkms install --no-depmod -m rtl8723de-5.1.1.8_21285.20171026_COEX20170111 -v 1414 -k 5.13.4-arch2-1
Error! Bad return status for module build on kernel: 5.13.4-arch2-1 (x86_64)
Consult /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/make.log for more information.
==> Warning, `dkms install --no-depmod -m rtl8723de-5.1.1.8_21285.20171026_COEX20170111 -v 1414 -k 5.13.4-arch2-1' returned 10
==> depmod 5.13.4-arch2-1

Zod · 2021-07-31 00:53:09

I suppose you should post

/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/make.log

Edit0: What kernel are you running? Answer: 5.13.4-arch2-1

Last edited by Zod (2021-07-31 01:01:26)

sethsource · 2021-07-31 01:02:53

Zod wrote:

I suppose you should post
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/make.log

Edit0: What kernel are you running? Answer: 5.13.4-arch2-1

seth@seth-linux: ~ $ uname -a
Linux seth-linux 5.13.4-arch2-1 #1 SMP PREEMPT Thu, 22 Jul 2021 20:46:28 +0000 x86_64 GNU/Linux

DKMS make.log for rtl8723de-5.1.1.8_21285.20171026_COEX20170111-1414 for kernel 5.13.4-arch2-1 (x86_64)
Fri Jul 30 11:32:52 AM MDT 2021
/bin/sh: line 1: bc: command not found
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/5.13.4-arch2-1/build M=/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build  modules
make[1]: Entering directory '/usr/lib/modules/5.13.4-arch2-1/build'
/bin/sh: line 1: bc: command not found
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_cmd.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_cmd.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_cmd.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_security.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_security.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_security.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_debug.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_debug.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_debug.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_debug.c: In function ‘dump_drv_version’:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_debug.c:50:69: warning: macro "__DATE__" might prevent reproducible builds [-Wdate-time]
   50 |         RTW_PRINT_SEL(sel, "build time: %s %s\n", __DATE__, __TIME__);
      |                                                                     ^
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:65,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_debug.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_debug.c:50:51: warning: macro "__TIME__" might prevent reproducible builds [-Wdate-time]
   50 |         RTW_PRINT_SEL(sel, "build time: %s %s\n", __DATE__, __TIME__);
      |                                                   ^~~~~~~~
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/rtw_debug.h:112:55: note: in definition of macro ‘RTW_PRINT’
  112 |                         _dbgdump(DRIVER_PREFIX fmt, ##arg);\
      |                                                       ^~~
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_debug.c:50:9: note: in expansion of macro ‘RTW_PRINT_SEL’
   50 |         RTW_PRINT_SEL(sel, "build time: %s %s\n", __DATE__, __TIME__);
      |         ^~~~~~~~~~~~~
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_debug.c:50:61: warning: macro "__DATE__" might prevent reproducible builds [-Wdate-time]
   50 |         RTW_PRINT_SEL(sel, "build time: %s %s\n", __DATE__, __TIME__);
      |                                                             ^~~~~~~~
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/rtw_debug.h:112:55: note: in definition of macro ‘RTW_PRINT’
  112 |                         _dbgdump(DRIVER_PREFIX fmt, ##arg);\
      |                                                       ^~~
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_debug.c:50:9: note: in expansion of macro ‘RTW_PRINT_SEL’
   50 |         RTW_PRINT_SEL(sel, "build time: %s %s\n", __DATE__, __TIME__);
      |         ^~~~~~~~~~~~~
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_debug.c:50:51: warning: macro "__TIME__" might prevent reproducible builds [-Wdate-time]
   50 |         RTW_PRINT_SEL(sel, "build time: %s %s\n", __DATE__, __TIME__);
      |                                                   ^~~~~~~~
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/rtw_debug.h:290:46: note: in definition of macro ‘RTW_PRINT_SEL’
  290 |                         _seqdump(sel, fmt, ##arg) /*rtw_warn_on(1)*/; \
      |                                              ^~~
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_io.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_io.c:52:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_io.c:52:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_ioctl_query.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_ioctl_query.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_ioctl_query.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_ioctl_set.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_ioctl_set.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_ioctl_set.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_ieee80211.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_ieee80211.c:25:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_ieee80211.c:25:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_mlme.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/../hal/phydm/phydm_types.h:173,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/../hal/phydm/phydm_precomp.h:24,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/hal_data.h:25,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_mlme.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/../hal/phydm/phydm_types.h:173,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/../hal/phydm/phydm_precomp.h:24,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/hal_data.h:25,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_mlme.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_mlme_ext.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_mlme_ext.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_mlme_ext.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_mlme_ext.c: In function ‘mgt_dispatcher’:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_mlme_ext.c:1464:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
 1464 |                 if (check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
      |                    ^
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_mlme_ext.c:1469:9: note: here
 1469 |         case WIFI_ASSOCREQ:
      |         ^~~~
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_mi.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_mi.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_mi.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_wlan_util.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_wlan_util.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_wlan_util.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_vht.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_vht.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_vht.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_pwrctrl.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_pwrctrl.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_pwrctrl.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_rf.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_rf.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_rf.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_recv.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_recv.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_recv.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_sta_mgt.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_sta_mgt.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_sta_mgt.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_ap.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_ap.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_ap.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_xmit.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_xmit.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_xmit.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_p2p.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_p2p.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_p2p.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_tdls.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_tdls.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_tdls.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_br_ext.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_br_ext.c:32:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_br_ext.c:32:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_iol.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_iol.c:21:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_iol.c:21:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_sreset.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_sreset.c:21:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_sreset.c:21:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_btcoex.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_btcoex.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_btcoex.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_beamforming.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_beamforming.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_beamforming.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_odm.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/rtw_odm.h:23,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_odm.c:21:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/rtw_odm.h:23,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/rtw_odm.c:21:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/efuse/rtw_efuse.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/efuse/rtw_efuse.c:22:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/core/efuse/rtw_efuse.c:22:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
  CC [M]  /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/os_dep/osdep_service.o
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:35,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/os_dep/osdep_service.c:24:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/wifi.h:1006: warning: "IEEE80211_MAX_AMPDU_BUF" redefined
 1006 | #define IEEE80211_MAX_AMPDU_BUF 0x40
      | 
In file included from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service_linux.h:86,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/osdep_service.h:42,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/include/drv_types.h:32,
                 from /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/os_dep/osdep_service.c:24:
./include/linux/ieee80211.h:1657: note: this is the location of the previous definition
 1657 | #define IEEE80211_MAX_AMPDU_BUF         0x100
      | 
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/os_dep/osdep_service.c: In function ‘isFileReadable’:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/os_dep/osdep_service.c:2087:25: error: implicit declaration of function ‘get_fs’; did you mean ‘get_sa’? [-Werror=implicit-function-declaration]
 2087 |                 oldfs = get_fs();
      |                         ^~~~~~
      |                         get_sa
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/os_dep/osdep_service.c:2087:25: error: incompatible types when assigning to type ‘mm_segment_t’ from type ‘int’
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/os_dep/osdep_service.c:2088:17: error: implicit declaration of function ‘set_fs’; did you mean ‘sget_fc’? [-Werror=implicit-function-declaration]
 2088 |                 set_fs(KERNEL_DS);
      |                 ^~~~~~
      |                 sget_fc
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/os_dep/osdep_service.c:2088:24: error: ‘KERNEL_DS’ undeclared (first use in this function); did you mean ‘KERNFS_NS’?
 2088 |                 set_fs(KERNEL_DS);
      |                        ^~~~~~~~~
      |                        KERNFS_NS
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/os_dep/osdep_service.c:2088:24: note: each undeclared identifier is reported only once for each function it appears in
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/os_dep/osdep_service.c: In function ‘retriveFromFile’:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/os_dep/osdep_service.c:2125:33: error: incompatible types when assigning to type ‘mm_segment_t’ from type ‘int’
 2125 |                         oldfs = get_fs();
      |                                 ^~~~~~
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/os_dep/osdep_service.c:2126:32: error: ‘KERNEL_DS’ undeclared (first use in this function); did you mean ‘KERNFS_NS’?
 2126 |                         set_fs(KERNEL_DS);
      |                                ^~~~~~~~~
      |                                KERNFS_NS
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/os_dep/osdep_service.c: In function ‘storeToFile’:
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/os_dep/osdep_service.c:2160:33: error: incompatible types when assigning to type ‘mm_segment_t’ from type ‘int’
 2160 |                         oldfs = get_fs();
      |                                 ^~~~~~
/var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/os_dep/osdep_service.c:2161:32: error: ‘KERNEL_DS’ undeclared (first use in this function); did you mean ‘KERNFS_NS’?
 2161 |                         set_fs(KERNEL_DS);
      |                                ^~~~~~~~~
      |                                KERNFS_NS
cc1: some warnings being treated as errors
make[2]: *** [scripts/Makefile.build:273: /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build/os_dep/osdep_service.o] Error 1
make[1]: *** [Makefile:1852: /var/lib/dkms/rtl8723de-5.1.1.8_21285.20171026_COEX20170111/1414/build] Error 2
make[1]: Leaving directory '/usr/lib/modules/5.13.4-arch2-1/build'
make: *** [Makefile:1886: modules] Error 2

Zod · 2021-07-31 01:20:48

I'm seeing 2 things...

This is an ARM board or...

You should try mainline kernel...

You should probably post a full actual journal.

sethsource · 2021-07-31 01:28:53

Zod wrote:

I'm seeing 2 things...
This is an ARM board or...
You should try mainline kernel...
You should probably post a full actual journal.

The processor is Celeron N4020 which isnt an ARM chip. and what are you meaning a full journal?

And the mainline kernel isnt in the official repo? and also i've tested this on Latest Ubuntu, Fedora, and Manjaro. wont build.

Zod · 2021-07-31 01:34:54

https://aur.archlinux.org/packages/linux-mainline/

A journal would be the output of..

# journalctl -b

sethsource · 2021-07-31 01:39:00

Zod wrote:

https://aur.archlinux.org/packages/linux-mainline/
A journal would be the output of..
# journalctl -b 

Well I'm installing mainline right now... https://gyazo.com/9432ef52b0087d64a1b3adc8efbcdf50
So we'll see if that works.

-- Journal begins at Sun 2021-07-25 08:08:02 MDT, ends at Fri 2021-07-30 12:37:05 MDT. --
Jul 30 11:31:51 seth-linux kernel: microcode: microcode updated early to revision 0x1a, date = 2020-10-23
Jul 30 11:31:51 seth-linux kernel: Linux version 5.13.4-arch2-1 (linux@archlinux) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Thu, 22 Jul 2021 20:46:28 +0000
Jul 30 11:31:51 seth-linux kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0b8675a3-375d-446e-a8d2-c003749842ef rw loglevel=3
Jul 30 11:31:51 seth-linux kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
Jul 30 11:31:51 seth-linux kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
Jul 30 11:31:51 seth-linux kernel: x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
Jul 30 11:31:51 seth-linux kernel: x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
Jul 30 11:31:51 seth-linux kernel: x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
Jul 30 11:31:51 seth-linux kernel: x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
Jul 30 11:31:51 seth-linux kernel: x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
Jul 30 11:31:51 seth-linux kernel: BIOS-provided physical RAM map:
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000003dfff] usable
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x000000000003e000-0x000000000003ffff] reserved
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x0000000000040000-0x000000000009dfff] usable
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x0000000012151000-0x0000000076140fff] usable
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x0000000076141000-0x0000000079981fff] reserved
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x0000000079982000-0x00000000799a4fff] ACPI data
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x00000000799a5000-0x0000000079a0dfff] ACPI NVS
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x0000000079a0e000-0x0000000079d75fff] reserved
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x0000000079d76000-0x0000000079e1bfff] type 20
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x0000000079e1c000-0x000000007a775fff] usable
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x000000007a776000-0x000000007a821fff] reserved
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x000000007a822000-0x000000007abfffff] usable
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x000000007ac00000-0x000000007fffffff] reserved
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
Jul 30 11:31:51 seth-linux kernel: BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
Jul 30 11:31:51 seth-linux kernel: NX (Execute Disable) protection: active
Jul 30 11:31:51 seth-linux kernel: efi: EFI v2.70 by GPU Company
Jul 30 11:31:51 seth-linux kernel: efi: ACPI 2.0=0x7998d000 ACPI=0x7998d000 TPMFinalLog=0x799dc000 SMBIOS=0x79c2e000 SMBIOS 3.0=0x79c2d000 MEMATTR=0x72807018 ESRT=0x751caa18 
Jul 30 11:31:51 seth-linux kernel: SMBIOS 3.2.0 present.
Jul 30 11:31:51 seth-linux kernel: DMI: GPU Company GWTC116-2/GPU Company, BIOS LC-BI-11.6-Y116GR610-609-F 03/17/2021
Jul 30 11:31:51 seth-linux kernel: tsc: Fast TSC calibration using PIT
Jul 30 11:31:51 seth-linux kernel: tsc: Detected 1094.400 MHz processor
Jul 30 11:31:51 seth-linux kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Jul 30 11:31:51 seth-linux kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Jul 30 11:31:51 seth-linux kernel: last_pfn = 0x180000 max_arch_pfn = 0x400000000
Jul 30 11:31:51 seth-linux kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
Jul 30 11:31:51 seth-linux kernel: last_pfn = 0x7ac00 max_arch_pfn = 0x400000000
Jul 30 11:31:51 seth-linux kernel: esrt: Reserving ESRT space from 0x00000000751caa18 to 0x00000000751caa50.
Jul 30 11:31:51 seth-linux kernel: e820: update [mem 0x751ca000-0x751cafff] usable ==> reserved
Jul 30 11:31:51 seth-linux kernel: Using GB pages for direct mapping
Jul 30 11:31:51 seth-linux kernel: Secure boot disabled
Jul 30 11:31:51 seth-linux kernel: RAMDISK: [mem 0x35487000-0x36a3afff]
Jul 30 11:31:51 seth-linux kernel: ACPI: Early table checksum verification disabled
Jul 30 11:31:51 seth-linux kernel: ACPI: RSDP 0x000000007998D000 000024 (v02 ALASKA)
Jul 30 11:31:51 seth-linux kernel: ACPI: XSDT 0x000000007998D0C0 0000F4 (v01 ALASKA A M I    01072009 AMI  00010013)
Jul 30 11:31:51 seth-linux kernel: ACPI: FACP 0x000000007999AC50 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
Jul 30 11:31:51 seth-linux kernel: ACPI: DSDT 0x000000007998D260 00D9E5 (v02 ALASKA A M I    01072009 INTL 20160930)
Jul 30 11:31:51 seth-linux kernel: ACPI: FACS 0x0000000079A0D080 000040
Jul 30 11:31:51 seth-linux kernel: ACPI: FPDT 0x000000007999AD70 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
Jul 30 11:31:51 seth-linux kernel: ACPI: FIDT 0x000000007999ADC0 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
Jul 30 11:31:51 seth-linux kernel: ACPI: MSDM 0x000000007999AE60 000055 (v03 ALASKA A M I    01072009 AMI  00010013)
Jul 30 11:31:51 seth-linux kernel: ACPI: MCFG 0x000000007999AEC0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
Jul 30 11:31:51 seth-linux kernel: ACPI: DBG2 0x000000007999AF00 000072 (v00 INTEL  GLK-SOC  00000003 BRXT 0100000D)
Jul 30 11:31:51 seth-linux kernel: ACPI: DBGP 0x000000007999AF80 000034 (v01 INTEL  GLK-SOC  00000003 BRXT 0100000D)
Jul 30 11:31:51 seth-linux kernel: ACPI: HPET 0x000000007999AFC0 000038 (v01 INTEL  GLK-SOC  00000003 BRXT 0100000D)
Jul 30 11:31:51 seth-linux kernel: ACPI: LPIT 0x000000007999B000 00005C (v01 INTEL  GLK-SOC  00000003 BRXT 0100000D)
Jul 30 11:31:51 seth-linux kernel: ACPI: APIC 0x000000007999B060 000084 (v04 INTEL  GLK-SOC  00000003 BRXT 0100000D)
Jul 30 11:31:51 seth-linux kernel: ACPI: NPKT 0x000000007999B0F0 000065 (v01 INTEL  GLK-SOC  00000003 BRXT 0100000D)
Jul 30 11:31:51 seth-linux kernel: ACPI: SSDT 0x000000007999B160 003FCA (v02 INTEL  DptfTab  00000003 BRXT 0100000D)
Jul 30 11:31:51 seth-linux kernel: ACPI: SSDT 0x000000007999F130 000C8F (v02 INTEL  UsbCTabl 00000003 BRXT 0100000D)
Jul 30 11:31:51 seth-linux kernel: ACPI: SSDT 0x000000007999FDC0 000669 (v01 Intel_ Platform 00001000 INTL 20160930)
Jul 30 11:31:51 seth-linux kernel: ACPI: SSDT 0x00000000799A0430 0000B1 (v01 Intel_ ADebTabl 00001000 INTL 20160930)
Jul 30 11:31:51 seth-linux kernel: ACPI: SSDT 0x00000000799A04F0 0004B4 (v02 PmRef  Cpu0Ist  00003000 INTL 20160930)
Jul 30 11:31:51 seth-linux kernel: ACPI: SSDT 0x00000000799A09B0 000775 (v02 CpuRef CpuSsdt  00003000 INTL 20160930)
Jul 30 11:31:51 seth-linux kernel: ACPI: SSDT 0x00000000799A1130 00035F (v02 PmRef  Cpu0Tst  00003000 INTL 20160930)
Jul 30 11:31:51 seth-linux kernel: ACPI: SSDT 0x00000000799A1490 0001E6 (v02 PmRef  ApTst    00003000 INTL 20160930)
Jul 30 11:31:51 seth-linux kernel: ACPI: SSDT 0x00000000799A1680 00286F (v02 SaSsdt SaSsdt   00003000 INTL 20160930)
Jul 30 11:31:51 seth-linux kernel: ACPI: UEFI 0x00000000799A3EF0 000048 (v01 ALASKA A M I    00000002      01000013)
Jul 30 11:31:51 seth-linux kernel: ACPI: TPM2 0x00000000799A3F40 000034 (v04 ALASKA A M I    00000001 AMI  00000000)
Jul 30 11:31:51 seth-linux kernel: ACPI: DMAR 0x00000000799A3F80 0000A8 (v01 INTEL  GLK-SOC  00000003 BRXT 0100000D)
Jul 30 11:31:51 seth-linux kernel: ACPI: WDAT 0x00000000799A4030 000104 (v01                 00000000      00000000)
Jul 30 11:31:51 seth-linux kernel: ACPI: NHLT 0x00000000799A4140 0004BD (v00 ALASKA A M I    00000002      01000013)
Jul 30 11:31:51 seth-linux kernel: ACPI: WSMT 0x00000000799A4600 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving FACP table memory at [mem 0x7999ac50-0x7999ad63]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving DSDT table memory at [mem 0x7998d260-0x7999ac44]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving FACS table memory at [mem 0x79a0d080-0x79a0d0bf]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving FPDT table memory at [mem 0x7999ad70-0x7999adb3]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving FIDT table memory at [mem 0x7999adc0-0x7999ae5b]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving MSDM table memory at [mem 0x7999ae60-0x7999aeb4]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving MCFG table memory at [mem 0x7999aec0-0x7999aefb]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving DBG2 table memory at [mem 0x7999af00-0x7999af71]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving DBGP table memory at [mem 0x7999af80-0x7999afb3]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving HPET table memory at [mem 0x7999afc0-0x7999aff7]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving LPIT table memory at [mem 0x7999b000-0x7999b05b]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving APIC table memory at [mem 0x7999b060-0x7999b0e3]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving NPKT table memory at [mem 0x7999b0f0-0x7999b154]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving SSDT table memory at [mem 0x7999b160-0x7999f129]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving SSDT table memory at [mem 0x7999f130-0x7999fdbe]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving SSDT table memory at [mem 0x7999fdc0-0x799a0428]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving SSDT table memory at [mem 0x799a0430-0x799a04e0]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving SSDT table memory at [mem 0x799a04f0-0x799a09a3]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving SSDT table memory at [mem 0x799a09b0-0x799a1124]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving SSDT table memory at [mem 0x799a1130-0x799a148e]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving SSDT table memory at [mem 0x799a1490-0x799a1675]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving SSDT table memory at [mem 0x799a1680-0x799a3eee]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving UEFI table memory at [mem 0x799a3ef0-0x799a3f37]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving TPM2 table memory at [mem 0x799a3f40-0x799a3f73]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving DMAR table memory at [mem 0x799a3f80-0x799a4027]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving WDAT table memory at [mem 0x799a4030-0x799a4133]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving NHLT table memory at [mem 0x799a4140-0x799a45fc]
Jul 30 11:31:51 seth-linux kernel: ACPI: Reserving WSMT table memory at [mem 0x799a4600-0x799a4627]
Jul 30 11:31:51 seth-linux kernel: ACPI: Local APIC address 0xfee00000
Jul 30 11:31:51 seth-linux kernel: No NUMA configuration found
Jul 30 11:31:51 seth-linux kernel: Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
Jul 30 11:31:51 seth-linux kernel: NODE_DATA(0) allocated [mem 0x17fff9000-0x17fffcfff]
Jul 30 11:31:51 seth-linux kernel: Zone ranges:
Jul 30 11:31:51 seth-linux kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
Jul 30 11:31:51 seth-linux kernel:   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
Jul 30 11:31:51 seth-linux kernel:   Normal   [mem 0x0000000100000000-0x000000017fffffff]
Jul 30 11:31:51 seth-linux kernel:   Device   empty
Jul 30 11:31:51 seth-linux kernel: Movable zone start for each node
Jul 30 11:31:51 seth-linux kernel: Early memory node ranges
Jul 30 11:31:51 seth-linux kernel:   node   0: [mem 0x0000000000001000-0x000000000003dfff]
Jul 30 11:31:51 seth-linux kernel:   node   0: [mem 0x0000000000040000-0x000000000009dfff]
Jul 30 11:31:51 seth-linux kernel:   node   0: [mem 0x0000000000100000-0x000000000fffffff]
Jul 30 11:31:51 seth-linux kernel:   node   0: [mem 0x0000000012151000-0x0000000076140fff]
Jul 30 11:31:51 seth-linux kernel:   node   0: [mem 0x0000000079e1c000-0x000000007a775fff]
Jul 30 11:31:51 seth-linux kernel:   node   0: [mem 0x000000007a822000-0x000000007abfffff]
Jul 30 11:31:51 seth-linux kernel:   node   0: [mem 0x0000000100000000-0x000000017fffffff]
Jul 30 11:31:51 seth-linux kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
Jul 30 11:31:51 seth-linux kernel: On node 0 totalpages: 1002691
Jul 30 11:31:51 seth-linux kernel:   DMA zone: 64 pages used for memmap
Jul 30 11:31:51 seth-linux kernel:   DMA zone: 155 pages reserved
Jul 30 11:31:51 seth-linux kernel:   DMA zone: 3995 pages, LIFO batch:0
Jul 30 11:31:51 seth-linux kernel:   DMA32 zone: 7413 pages used for memmap
Jul 30 11:31:51 seth-linux kernel:   DMA32 zone: 474408 pages, LIFO batch:63
Jul 30 11:31:51 seth-linux kernel:   Normal zone: 8192 pages used for memmap
Jul 30 11:31:51 seth-linux kernel:   Normal zone: 524288 pages, LIFO batch:63
Jul 30 11:31:51 seth-linux kernel: On node 0, zone DMA: 1 pages in unavailable ranges
Jul 30 11:31:51 seth-linux kernel: On node 0, zone DMA: 2 pages in unavailable ranges
Jul 30 11:31:51 seth-linux kernel: On node 0, zone DMA: 98 pages in unavailable ranges
Jul 30 11:31:51 seth-linux kernel: On node 0, zone DMA32: 8529 pages in unavailable ranges
Jul 30 11:31:51 seth-linux kernel: On node 0, zone DMA32: 15579 pages in unavailable ranges
Jul 30 11:31:51 seth-linux kernel: On node 0, zone DMA32: 172 pages in unavailable ranges
Jul 30 11:31:51 seth-linux kernel: On node 0, zone Normal: 21504 pages in unavailable ranges
Jul 30 11:31:51 seth-linux kernel: Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
Jul 30 11:31:51 seth-linux kernel: ACPI: PM-Timer IO Port: 0x408
Jul 30 11:31:51 seth-linux kernel: ACPI: Local APIC address 0xfee00000
Jul 30 11:31:51 seth-linux kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
Jul 30 11:31:51 seth-linux kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
Jul 30 11:31:51 seth-linux kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
Jul 30 11:31:51 seth-linux kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
Jul 30 11:31:51 seth-linux kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
Jul 30 11:31:51 seth-linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jul 30 11:31:51 seth-linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Jul 30 11:31:51 seth-linux kernel: ACPI: IRQ0 used by override.
Jul 30 11:31:51 seth-linux kernel: ACPI: IRQ9 used by override.
Jul 30 11:31:51 seth-linux kernel: Using ACPI (MADT) for SMP configuration information
Jul 30 11:31:51 seth-linux kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
Jul 30 11:31:51 seth-linux kernel: TSC deadline timer available
Jul 30 11:31:51 seth-linux kernel: smpboot: Allowing 4 CPUs, 2 hotplug CPUs
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0x0003e000-0x0003ffff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0x10000000-0x12150fff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0x751ca000-0x751cafff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0x76141000-0x79981fff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0x79982000-0x799a4fff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0x799a5000-0x79a0dfff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0x79a0e000-0x79d75fff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0x79d76000-0x79e1bfff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0x7a776000-0x7a821fff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0x7ac00000-0x7fffffff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0x80000000-0xcfffffff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0xd1000000-0xd3708fff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0xd3709000-0xd3709fff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0xd370a000-0xdfffffff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfe041fff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
Jul 30 11:31:51 seth-linux kernel: PM: hibernation: Registered nosave memory: [mem 0xff800000-0xffffffff]
Jul 30 11:31:51 seth-linux kernel: [mem 0x80000000-0xcfffffff] available for PCI devices
Jul 30 11:31:51 seth-linux kernel: Booting paravirtualized kernel on bare hardware
Jul 30 11:31:51 seth-linux kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
Jul 30 11:31:51 seth-linux kernel: setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
Jul 30 11:31:51 seth-linux kernel: percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u524288
Jul 30 11:31:51 seth-linux kernel: pcpu-alloc: s196608 r8192 d28672 u524288 alloc=1*2097152
Jul 30 11:31:51 seth-linux kernel: pcpu-alloc: [0] 0 1 2 3 
Jul 30 11:31:51 seth-linux kernel: Built 1 zonelists, mobility grouping on.  Total pages: 986867
Jul 30 11:31:51 seth-linux kernel: Policy zone: Normal
Jul 30 11:31:51 seth-linux kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0b8675a3-375d-446e-a8d2-c003749842ef rw loglevel=3
Jul 30 11:31:51 seth-linux kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Jul 30 11:31:51 seth-linux kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Jul 30 11:31:51 seth-linux kernel: mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
Jul 30 11:31:51 seth-linux kernel: Memory: 3783640K/4010764K available (14344K kernel code, 2049K rwdata, 9084K rodata, 1792K init, 4136K bss, 226864K reserved, 0K cma-reserved)
Jul 30 11:31:51 seth-linux kernel: random: get_random_u64 called from __kmem_cache_create+0x2a/0x580 with crng_init=0
Jul 30 11:31:51 seth-linux kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jul 30 11:31:51 seth-linux kernel: ftrace: allocating 42290 entries in 166 pages
Jul 30 11:31:51 seth-linux kernel: ftrace: allocated 166 pages with 4 groups
Jul 30 11:31:51 seth-linux kernel: rcu: Preemptible hierarchical RCU implementation.
Jul 30 11:31:51 seth-linux kernel: rcu:         RCU dyntick-idle grace-period acceleration is enabled.
Jul 30 11:31:51 seth-linux kernel: rcu:         RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
Jul 30 11:31:51 seth-linux kernel: rcu:         RCU priority boosting: priority 1 delay 500 ms.
Jul 30 11:31:51 seth-linux kernel:         Trampoline variant of Tasks RCU enabled.
Jul 30 11:31:51 seth-linux kernel:         Rude variant of Tasks RCU enabled.
Jul 30 11:31:51 seth-linux kernel:         Tracing variant of Tasks RCU enabled.
Jul 30 11:31:51 seth-linux kernel: rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
Jul 30 11:31:51 seth-linux kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Jul 30 11:31:51 seth-linux kernel: NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 16
Jul 30 11:31:51 seth-linux kernel: Console: colour dummy device 80x25
Jul 30 11:31:51 seth-linux kernel: printk: console [tty0] enabled
Jul 30 11:31:51 seth-linux kernel: ACPI: Core revision 20210331
Jul 30 11:31:51 seth-linux kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
Jul 30 11:31:51 seth-linux kernel: APIC: Switch to symmetric I/O mode setup
Jul 30 11:31:51 seth-linux kernel: DMAR: Host address width 39
Jul 30 11:31:51 seth-linux kernel: DMAR: DRHD base: 0x000000fed64000 flags: 0x0
Jul 30 11:31:51 seth-linux kernel: DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e
Jul 30 11:31:51 seth-linux kernel: DMAR: DRHD base: 0x000000fed65000 flags: 0x1
Jul 30 11:31:51 seth-linux kernel: DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
Jul 30 11:31:51 seth-linux kernel: DMAR: RMRR base: 0x00000079930000 end: 0x0000007994ffff
Jul 30 11:31:51 seth-linux kernel: DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
Jul 30 11:31:51 seth-linux kernel: DMAR-IR: IOAPIC id 1 under DRHD base  0xfed65000 IOMMU 1
Jul 30 11:31:51 seth-linux kernel: DMAR-IR: HPET id 0 under DRHD base 0xfed65000
Jul 30 11:31:51 seth-linux kernel: DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
Jul 30 11:31:51 seth-linux kernel: DMAR-IR: Enabled IRQ remapping in x2apic mode
Jul 30 11:31:51 seth-linux kernel: x2apic enabled
Jul 30 11:31:51 seth-linux kernel: Switched APIC routing to cluster x2apic.
Jul 30 11:31:51 seth-linux kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Jul 30 11:31:51 seth-linux kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
Jul 30 11:31:51 seth-linux kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 2189.00 BogoMIPS (lpj=3648000)
Jul 30 11:31:51 seth-linux kernel: pid_max: default: 32768 minimum: 301
Jul 30 11:31:51 seth-linux kernel: LSM: Security Framework initializing
Jul 30 11:31:51 seth-linux kernel: landlock: Up and running.
Jul 30 11:31:51 seth-linux kernel: Yama: becoming mindful.
Jul 30 11:31:51 seth-linux kernel: LSM support for eBPF active
Jul 30 11:31:51 seth-linux kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jul 30 11:31:51 seth-linux kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jul 30 11:31:51 seth-linux kernel: x86/cpu: SGX disabled by BIOS.
Jul 30 11:31:51 seth-linux kernel: CPU0: Thermal monitoring enabled (TM1)
Jul 30 11:31:51 seth-linux kernel: x86/cpu: User Mode Instruction Prevention (UMIP) activated
Jul 30 11:31:51 seth-linux kernel: process: using mwait in idle threads
Jul 30 11:31:51 seth-linux kernel: Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Jul 30 11:31:51 seth-linux kernel: Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Jul 30 11:31:51 seth-linux kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Jul 30 11:31:51 seth-linux kernel: Spectre V2 : Mitigation: Enhanced IBRS
Jul 30 11:31:51 seth-linux kernel: Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Jul 30 11:31:51 seth-linux kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Jul 30 11:31:51 seth-linux kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Jul 30 11:31:51 seth-linux kernel: Freeing SMP alternatives memory: 36K
Jul 30 11:31:51 seth-linux kernel: smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 2606
Jul 30 11:31:51 seth-linux kernel: smpboot: CPU0: Intel(R) Celeron(R) N4020 CPU @ 1.10GHz (family: 0x6, model: 0x7a, stepping: 0x8)
Jul 30 11:31:51 seth-linux kernel: Performance Events: PEBS fmt3+, Goldmont plus events, 32-deep LBR, full-width counters, Intel PMU driver.
Jul 30 11:31:51 seth-linux kernel: ... version:                4
Jul 30 11:31:51 seth-linux kernel: ... bit width:              48
Jul 30 11:31:51 seth-linux kernel: ... generic registers:      4
Jul 30 11:31:51 seth-linux kernel: ... value mask:             0000ffffffffffff
Jul 30 11:31:51 seth-linux kernel: ... max period:             00007fffffffffff
Jul 30 11:31:51 seth-linux kernel: ... fixed-purpose events:   3
Jul 30 11:31:51 seth-linux kernel: ... event mask:             000000070000000f
Jul 30 11:31:51 seth-linux kernel: rcu: Hierarchical SRCU implementation.
Jul 30 11:31:51 seth-linux kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Jul 30 11:31:51 seth-linux kernel: smp: Bringing up secondary CPUs ...
Jul 30 11:31:51 seth-linux kernel: x86: Booting SMP configuration:
Jul 30 11:31:51 seth-linux kernel: .... node  #0, CPUs:      #1
Jul 30 11:31:51 seth-linux kernel: smp: Brought up 1 node, 2 CPUs
Jul 30 11:31:51 seth-linux kernel: smpboot: Max logical packages: 2
Jul 30 11:31:51 seth-linux kernel: smpboot: Total of 2 processors activated (4379.00 BogoMIPS)
Jul 30 11:31:51 seth-linux kernel: devtmpfs: initialized
Jul 30 11:31:51 seth-linux kernel: x86/mm: Memory block size: 128MB
Jul 30 11:31:51 seth-linux kernel: PM: Registering ACPI NVS region [mem 0x799a5000-0x79a0dfff] (430080 bytes)
Jul 30 11:31:51 seth-linux kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
Jul 30 11:31:51 seth-linux kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Jul 30 11:31:51 seth-linux kernel: pinctrl core: initialized pinctrl subsystem
Jul 30 11:31:51 seth-linux kernel: PM: RTC time: 17:31:49, date: 2021-07-30
Jul 30 11:31:51 seth-linux kernel: NET: Registered protocol family 16
Jul 30 11:31:51 seth-linux kernel: DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
Jul 30 11:31:51 seth-linux kernel: DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Jul 30 11:31:51 seth-linux kernel: DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Jul 30 11:31:51 seth-linux kernel: audit: initializing netlink subsys (disabled)
Jul 30 11:31:51 seth-linux kernel: audit: type=2000 audit(1627666309.049:1): state=initialized audit_enabled=0 res=1
Jul 30 11:31:51 seth-linux kernel: thermal_sys: Registered thermal governor 'fair_share'
Jul 30 11:31:51 seth-linux kernel: thermal_sys: Registered thermal governor 'bang_bang'
Jul 30 11:31:51 seth-linux kernel: thermal_sys: Registered thermal governor 'step_wise'
Jul 30 11:31:51 seth-linux kernel: thermal_sys: Registered thermal governor 'user_space'
Jul 30 11:31:51 seth-linux kernel: thermal_sys: Registered thermal governor 'power_allocator'
Jul 30 11:31:51 seth-linux kernel: cpuidle: using governor ladder
Jul 30 11:31:51 seth-linux kernel: cpuidle: using governor menu
Jul 30 11:31:51 seth-linux kernel: ACPI: bus type PCI registered
Jul 30 11:31:51 seth-linux kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Jul 30 11:31:51 seth-linux kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Jul 30 11:31:51 seth-linux kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
Jul 30 11:31:51 seth-linux kernel: PCI: Using configuration type 1 for base access
Jul 30 11:31:51 seth-linux kernel: Kprobes globally optimized
Jul 30 11:31:51 seth-linux kernel: HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
Jul 30 11:31:51 seth-linux kernel: HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
Jul 30 11:31:51 seth-linux kernel: ACPI: Added _OSI(Module Device)
Jul 30 11:31:51 seth-linux kernel: ACPI: Added _OSI(Processor Device)
Jul 30 11:31:51 seth-linux kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Jul 30 11:31:51 seth-linux kernel: ACPI: Added _OSI(Processor Aggregator Device)
Jul 30 11:31:51 seth-linux kernel: ACPI: Added _OSI(Linux-Dell-Video)
Jul 30 11:31:51 seth-linux kernel: ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
Jul 30 11:31:51 seth-linux kernel: ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
Jul 30 11:31:51 seth-linux kernel: ACPI: 10 ACPI AML tables successfully acquired and loaded
Jul 30 11:31:51 seth-linux kernel: ACPI: Dynamic OEM Table Load:
Jul 30 11:31:51 seth-linux kernel: ACPI: SSDT 0xFFFF95ED00D4DA00 000190 (v02 PmRef  Cpu0Cst  00003001 INTL 20160930)
Jul 30 11:31:51 seth-linux kernel: ACPI: Dynamic OEM Table Load:
Jul 30 11:31:51 seth-linux kernel: ACPI: SSDT 0xFFFF95ED00D4C000 0001E6 (v02 PmRef  ApIst    00003000 INTL 20160930)
Jul 30 11:31:51 seth-linux kernel: ACPI: Dynamic OEM Table Load:
Jul 30 11:31:51 seth-linux kernel: ACPI: SSDT 0xFFFF95ED00B9B100 0000C9 (v02 PmRef  ApCst    00003000 INTL 20160930)
Jul 30 11:31:51 seth-linux kernel: ACPI: EC: EC started
Jul 30 11:31:51 seth-linux kernel: ACPI: EC: interrupt blocked
Jul 30 11:31:51 seth-linux kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
Jul 30 11:31:51 seth-linux kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC used to handle transactions
Jul 30 11:31:51 seth-linux kernel: ACPI: Interpreter enabled
Jul 30 11:31:51 seth-linux kernel: ACPI: (supports S0 S3 S4 S5)
Jul 30 11:31:51 seth-linux kernel: ACPI: Using IOAPIC for interrupt routing
Jul 30 11:31:51 seth-linux kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Jul 30 11:31:51 seth-linux kernel: ACPI: Enabled 11 GPEs in block 00 to 7F
Jul 30 11:31:51 seth-linux kernel: ACPI: PM: Power Resource [DRST] (on)
Jul 30 11:31:51 seth-linux kernel: ACPI: PM: Power Resource [DRST] (on)
Jul 30 11:31:51 seth-linux kernel: ACPI: PM: Power Resource [DRST] (on)
Jul 30 11:31:51 seth-linux kernel: ACPI: PM: Power Resource [DRST] (on)
Jul 30 11:31:51 seth-linux kernel: ACPI: PM: Power Resource [DRST] (on)
Jul 30 11:31:51 seth-linux kernel: ACPI: PM: Power Resource [DRST] (on)
Jul 30 11:31:51 seth-linux kernel: ACPI: PM: Power Resource [WRST] (on)
Jul 30 11:31:51 seth-linux kernel: ACPI: PM: Power Resource [FN00] (on)
Jul 30 11:31:51 seth-linux kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Jul 30 11:31:51 seth-linux kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
Jul 30 11:31:51 seth-linux kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
Jul 30 11:31:51 seth-linux kernel: acpi PNP0A08:00: host bridge window [mem 0x1000000010000 window] (ignored, not CPU addressable)
Jul 30 11:31:51 seth-linux kernel: PCI host bridge to bus 0000:00
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:00.1: [8086:318c] type 00 class 0x118000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:00.1: reg 0x10: [mem 0x80000000-0x80007fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:02.0: [8086:3185] type 00 class 0x030000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:02.0: BAR 2: assigned to efifb
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:0e.0: [8086:3198] type 00 class 0x040100
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:0e.0: reg 0x10: [mem 0xa1110000-0xa1113fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:0e.0: reg 0x20: [mem 0xa1000000-0xa10fffff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:0f.0: reg 0x10: [mem 0xa1139000-0xa1139fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:0f.0: PME# supported from D3hot
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:12.0: reg 0x10: [mem 0xa1114000-0xa1115fff]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:12.0: reg 0x14: [mem 0xa1138000-0xa11380ff]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:12.0: reg 0x18: [io  0xf090-0xf097]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:12.0: reg 0x1c: [io  0xf080-0xf083]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:12.0: reg 0x20: [io  0xf060-0xf07f]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:12.0: reg 0x24: [mem 0xa1137000-0xa11377ff]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:12.0: PME# supported from D3hot
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:13.1: [8086:31d9] type 01 class 0x060400
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:13.1: PME# supported from D0 D3hot D3cold
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:13.2: [8086:31da] type 01 class 0x060400
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:13.3: [8086:31db] type 01 class 0x060400
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:15.0: reg 0x10: [mem 0xa1100000-0xa110ffff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:15.0: PME# supported from D3hot D3cold
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:16.0: [8086:31ac] type 00 class 0x118000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:16.0: reg 0x10: [mem 0xa1136000-0xa1136fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:16.0: reg 0x18: [mem 0xa1135000-0xa1135fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:16.1: [8086:31ae] type 00 class 0x118000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:16.1: reg 0x10: [mem 0xa1134000-0xa1134fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:16.1: reg 0x18: [mem 0xa1133000-0xa1133fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:16.2: [8086:31b0] type 00 class 0x118000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:16.2: reg 0x10: [mem 0xa1132000-0xa1132fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:16.2: reg 0x18: [mem 0xa1131000-0xa1131fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:16.3: [8086:31b2] type 00 class 0x118000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:16.3: reg 0x10: [mem 0xa1130000-0xa1130fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:16.3: reg 0x18: [mem 0xa112f000-0xa112ffff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:17.0: [8086:31b4] type 00 class 0x118000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:17.0: reg 0x10: [mem 0xa112e000-0xa112efff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:17.0: reg 0x18: [mem 0xa112d000-0xa112dfff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:17.1: [8086:31b6] type 00 class 0x118000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:17.1: reg 0x10: [mem 0xa112c000-0xa112cfff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:17.1: reg 0x18: [mem 0xa112b000-0xa112bfff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:17.2: [8086:31b8] type 00 class 0x118000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:17.2: reg 0x10: [mem 0xa112a000-0xa112afff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:17.2: reg 0x18: [mem 0xa1129000-0xa1129fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:17.3: [8086:31ba] type 00 class 0x118000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:17.3: reg 0x10: [mem 0xa1128000-0xa1128fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:17.3: reg 0x18: [mem 0xa1127000-0xa1127fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:18.0: [8086:31bc] type 00 class 0x118000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:18.0: reg 0x10: [mem 0xa1126000-0xa1126fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:18.0: reg 0x18: [mem 0xa1125000-0xa1125fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:18.1: [8086:31be] type 00 class 0x118000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:18.1: reg 0x10: [mem 0xa1124000-0xa1124fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:18.1: reg 0x18: [mem 0xa1123000-0xa1123fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:18.2: [8086:31c0] type 00 class 0x118000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:18.2: reg 0x10: [mem 0xfea10000-0xfea10fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:18.2: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:18.3: [8086:31ee] type 00 class 0x118000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:18.3: reg 0x10: [mem 0xa1122000-0xa1122fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:18.3: reg 0x18: [mem 0xa1121000-0xa1121fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:19.0: [8086:31c2] type 00 class 0x118000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:19.0: reg 0x10: [mem 0xa1120000-0xa1120fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:19.0: reg 0x18: [mem 0xa111f000-0xa111ffff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:19.1: [8086:31c4] type 00 class 0x118000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:19.1: reg 0x10: [mem 0xa111e000-0xa111efff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:19.1: reg 0x18: [mem 0xa111d000-0xa111dfff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:19.2: [8086:31c6] type 00 class 0x118000
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:19.2: reg 0x10: [mem 0xa111c000-0xa111cfff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:19.2: reg 0x18: [mem 0xa111b000-0xa111bfff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:1c.0: [8086:31cc] type 00 class 0x080501
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:1c.0: reg 0x10: [mem 0xa111a000-0xa111afff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:1c.0: reg 0x18: [mem 0xa1119000-0xa1119fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:1e.0: [8086:31d0] type 00 class 0x080501
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:1e.0: reg 0x10: [mem 0xa1118000-0xa1118fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:1e.0: reg 0x18: [mem 0xa1117000-0xa1117fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:1f.1: reg 0x10: [mem 0xa1116000-0xa11160ff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:1f.1: reg 0x20: [io  0xf040-0xf05f]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:13.1: PCI bridge to [bus 02]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:13.2: PCI bridge to [bus 03]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:13.3: PCI bridge to [bus 04]
Jul 30 11:31:51 seth-linux kernel: ACPI: PCI: Interrupt link LNKA configured for IRQ 3
Jul 30 11:31:51 seth-linux kernel: ACPI: PCI: Interrupt link LNKB configured for IRQ 4
Jul 30 11:31:51 seth-linux kernel: ACPI: PCI: Interrupt link LNKC configured for IRQ 5
Jul 30 11:31:51 seth-linux kernel: ACPI: PCI: Interrupt link LNKD configured for IRQ 6
Jul 30 11:31:51 seth-linux kernel: ACPI: PCI: Interrupt link LNKE configured for IRQ 7
Jul 30 11:31:51 seth-linux kernel: ACPI: PCI: Interrupt link LNKF configured for IRQ 9
Jul 30 11:31:51 seth-linux kernel: ACPI: PCI: Interrupt link LNKG configured for IRQ 10
Jul 30 11:31:51 seth-linux kernel: ACPI: PCI: Interrupt link LNKH configured for IRQ 11
Jul 30 11:31:51 seth-linux kernel: acpi LNXPOWER:06: Turning OFF
Jul 30 11:31:51 seth-linux kernel: acpi LNXPOWER:05: Turning OFF
Jul 30 11:31:51 seth-linux kernel: acpi LNXPOWER:04: Turning OFF
Jul 30 11:31:51 seth-linux kernel: acpi LNXPOWER:03: Turning OFF
Jul 30 11:31:51 seth-linux kernel: acpi LNXPOWER:02: Turning OFF
Jul 30 11:31:51 seth-linux kernel: acpi LNXPOWER:01: Turning OFF
Jul 30 11:31:51 seth-linux kernel: acpi LNXPOWER:00: Turning OFF
Jul 30 11:31:51 seth-linux kernel: ACPI Warning: GPE type mismatch (level/edge) (20210331/evxface-791)
Jul 30 11:31:51 seth-linux kernel: ACPI: EC: interrupt unblocked
Jul 30 11:31:51 seth-linux kernel: ACPI: EC: event unblocked
Jul 30 11:31:51 seth-linux kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
Jul 30 11:31:51 seth-linux kernel: ACPI: EC: GPE=0x26
Jul 30 11:31:51 seth-linux kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC initialization complete
Jul 30 11:31:51 seth-linux kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: EC: Used to handle transactions and events
Jul 30 11:31:51 seth-linux kernel: iommu: Default domain type: Translated 
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:02.0: vgaarb: setting as boot VGA device
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:02.0: vgaarb: bridge control possible
Jul 30 11:31:51 seth-linux kernel: vgaarb: loaded
Jul 30 11:31:51 seth-linux kernel: SCSI subsystem initialized
Jul 30 11:31:51 seth-linux kernel: libata version 3.00 loaded.
Jul 30 11:31:51 seth-linux kernel: ACPI: bus type USB registered
Jul 30 11:31:51 seth-linux kernel: usbcore: registered new interface driver usbfs
Jul 30 11:31:51 seth-linux kernel: usbcore: registered new interface driver hub
Jul 30 11:31:51 seth-linux kernel: usbcore: registered new device driver usb
Jul 30 11:31:51 seth-linux kernel: pps_core: LinuxPPS API ver. 1 registered
Jul 30 11:31:51 seth-linux kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Jul 30 11:31:51 seth-linux kernel: PTP clock support registered
Jul 30 11:31:51 seth-linux kernel: EDAC MC: Ver: 3.0.0
Jul 30 11:31:51 seth-linux kernel: Registered efivars operations
Jul 30 11:31:51 seth-linux kernel: NetLabel: Initializing
Jul 30 11:31:51 seth-linux kernel: NetLabel:  domain hash size = 128
Jul 30 11:31:51 seth-linux kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
Jul 30 11:31:51 seth-linux kernel: NetLabel:  unlabeled traffic allowed by default
Jul 30 11:31:51 seth-linux kernel: PCI: Using ACPI for IRQ routing
Jul 30 11:31:51 seth-linux kernel: PCI: pci_cache_line_size set to 64 bytes
Jul 30 11:31:51 seth-linux kernel: e820: reserve RAM buffer [mem 0x0003e000-0x0003ffff]
Jul 30 11:31:51 seth-linux kernel: e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
Jul 30 11:31:51 seth-linux kernel: e820: reserve RAM buffer [mem 0x751ca000-0x77ffffff]
Jul 30 11:31:51 seth-linux kernel: e820: reserve RAM buffer [mem 0x76141000-0x77ffffff]
Jul 30 11:31:51 seth-linux kernel: e820: reserve RAM buffer [mem 0x7a776000-0x7bffffff]
Jul 30 11:31:51 seth-linux kernel: e820: reserve RAM buffer [mem 0x7ac00000-0x7bffffff]
Jul 30 11:31:51 seth-linux kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Jul 30 11:31:51 seth-linux kernel: hpet0: 8 comparators, 64-bit 19.200000 MHz counter
Jul 30 11:31:51 seth-linux kernel: clocksource: Switched to clocksource tsc-early
Jul 30 11:31:51 seth-linux kernel: VFS: Disk quotas dquot_6.6.0
Jul 30 11:31:51 seth-linux kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jul 30 11:31:51 seth-linux kernel: pnp: PnP ACPI init
Jul 30 11:31:51 seth-linux kernel: system 00:00: [io  0x0680-0x069f] has been reserved
Jul 30 11:31:51 seth-linux kernel: system 00:00: [io  0x0400-0x047f] could not be reserved
Jul 30 11:31:51 seth-linux kernel: system 00:00: [io  0x0500-0x05fe] has been reserved
Jul 30 11:31:51 seth-linux kernel: system 00:00: [io  0x0600-0x061f] has been reserved
Jul 30 11:31:51 seth-linux kernel: system 00:00: [io  0x164e-0x164f] has been reserved
Jul 30 11:31:51 seth-linux kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
Jul 30 11:31:51 seth-linux kernel: system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
Jul 30 11:31:51 seth-linux kernel: system 00:01: [mem 0xfea00000-0xfeafffff] could not be reserved
Jul 30 11:31:51 seth-linux kernel: system 00:01: [mem 0xfed01000-0xfed01fff] has been reserved
Jul 30 11:31:51 seth-linux kernel: system 00:01: [mem 0xfed03000-0xfed03fff] has been reserved
Jul 30 11:31:51 seth-linux kernel: system 00:01: [mem 0xfed06000-0xfed06fff] has been reserved
Jul 30 11:31:51 seth-linux kernel: system 00:01: [mem 0xfed08000-0xfed09fff] has been reserved
Jul 30 11:31:51 seth-linux kernel: system 00:01: [mem 0xfed80000-0xfedbffff] has been reserved
Jul 30 11:31:51 seth-linux kernel: system 00:01: [mem 0xfed1c000-0xfed1cfff] has been reserved
Jul 30 11:31:51 seth-linux kernel: system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
Jul 30 11:31:51 seth-linux kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
Jul 30 11:31:51 seth-linux kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
Jul 30 11:31:51 seth-linux kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
Jul 30 11:31:51 seth-linux kernel: pnp: PnP ACPI: found 4 devices
Jul 30 11:31:51 seth-linux kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Jul 30 11:31:51 seth-linux kernel: NET: Registered protocol family 2
Jul 30 11:31:51 seth-linux kernel: IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
Jul 30 11:31:51 seth-linux kernel: tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
Jul 30 11:31:51 seth-linux kernel: TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
Jul 30 11:31:51 seth-linux kernel: TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
Jul 30 11:31:51 seth-linux kernel: TCP: Hash tables configured (established 32768 bind 32768)
Jul 30 11:31:51 seth-linux kernel: MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
Jul 30 11:31:51 seth-linux kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jul 30 11:31:51 seth-linux kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jul 30 11:31:51 seth-linux kernel: NET: Registered protocol family 1
Jul 30 11:31:51 seth-linux kernel: NET: Registered protocol family 44
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:18.2: BAR 2: assigned [mem 0x80008000-0x80008fff 64bit]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:13.1: PCI bridge to [bus 02]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:13.2: PCI bridge to [bus 03]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:13.3: PCI bridge to [bus 04]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 12 [mem 0x80000000-0xbfffffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 13 [mem 0xe0000000-0xefffffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 14 [mem 0xfea00000-0xfeafffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfed003ff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 16 [mem 0xfed01000-0xfed01fff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 17 [mem 0xfed03000-0xfed03fff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 18 [mem 0xfed06000-0xfed06fff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 19 [mem 0xfed08000-0xfed09fff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 20 [mem 0xfed80000-0xfedbffff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 21 [mem 0xfed1c000-0xfed1cfff window]
Jul 30 11:31:51 seth-linux kernel: pci_bus 0000:00: resource 22 [mem 0xfee00000-0xfeefffff window]
Jul 30 11:31:51 seth-linux kernel: pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Jul 30 11:31:51 seth-linux kernel: PCI: CLS 64 bytes, default 64
Jul 30 11:31:51 seth-linux kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Jul 30 11:31:51 seth-linux kernel: software IO TLB: mapped [mem 0x000000006e807000-0x0000000072807000] (64MB)
Jul 30 11:31:51 seth-linux kernel: Trying to unpack rootfs image as initramfs...
Jul 30 11:31:51 seth-linux kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
Jul 30 11:31:51 seth-linux kernel: clocksource: Switched to clocksource tsc
Jul 30 11:31:51 seth-linux kernel: Initialise system trusted keyrings
Jul 30 11:31:51 seth-linux kernel: Key type blacklist registered
Jul 30 11:31:51 seth-linux kernel: workingset: timestamp_bits=41 max_order=20 bucket_order=0
Jul 30 11:31:51 seth-linux kernel: zbud: loaded
Jul 30 11:31:51 seth-linux kernel: Key type asymmetric registered
Jul 30 11:31:51 seth-linux kernel: Asymmetric key parser 'x509' registered
Jul 30 11:31:51 seth-linux kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
Jul 30 11:31:51 seth-linux kernel: io scheduler mq-deadline registered
Jul 30 11:31:51 seth-linux kernel: io scheduler kyber registered
Jul 30 11:31:51 seth-linux kernel: io scheduler bfq registered
Jul 30 11:31:51 seth-linux kernel: pcieport 0000:00:13.0: PME: Signaling with IRQ 122
Jul 30 11:31:51 seth-linux kernel: pcieport 0000:00:13.1: PME: Signaling with IRQ 123
Jul 30 11:31:51 seth-linux kernel: pcieport 0000:00:13.2: PME: Signaling with IRQ 124
Jul 30 11:31:51 seth-linux kernel: pcieport 0000:00:13.3: PME: Signaling with IRQ 125
Jul 30 11:31:51 seth-linux kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jul 30 11:31:51 seth-linux kernel: efifb: probing for efifb
Jul 30 11:31:51 seth-linux kernel: efifb: No BGRT, not showing boot graphics
Jul 30 11:31:51 seth-linux kernel: efifb: framebuffer at 0x90000000, using 4160k, total 4160k
Jul 30 11:31:51 seth-linux kernel: efifb: mode is 1366x768x32, linelength=5504, pages=1
Jul 30 11:31:51 seth-linux kernel: efifb: scrolling: redraw
Jul 30 11:31:51 seth-linux kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Jul 30 11:31:51 seth-linux kernel: fbcon: Deferring console take-over
Jul 30 11:31:51 seth-linux kernel: fb0: EFI VGA frame buffer device
Jul 30 11:31:51 seth-linux kernel: ACPI: AC: AC Adapter [ADP1] (off-line)
Jul 30 11:31:51 seth-linux kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:03/PNP0C09:00/PNP0C0D:00/input/input0
Jul 30 11:31:51 seth-linux kernel: ACPI: button: Lid Switch [LID0]
Jul 30 11:31:51 seth-linux kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
Jul 30 11:31:51 seth-linux kernel: ACPI: button: Power Button [PWRB]
Jul 30 11:31:51 seth-linux kernel: thermal LNXTHERM:00: registered as thermal_zone0
Jul 30 11:31:51 seth-linux kernel: ACPI: thermal: Thermal Zone [TZ01] (50 C)
Jul 30 11:31:51 seth-linux kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Jul 30 11:31:51 seth-linux kernel: Non-volatile memory driver v1.3
Jul 30 11:31:51 seth-linux kernel: AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
Jul 30 11:31:51 seth-linux kernel: AMD-Vi: AMD IOMMUv2 functionality not available on this system
Jul 30 11:31:51 seth-linux kernel: ahci 0000:00:12.0: version 3.0
Jul 30 11:31:51 seth-linux kernel: ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
Jul 30 11:31:51 seth-linux kernel: ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst 
Jul 30 11:31:51 seth-linux kernel: ACPI: battery: Slot [BAT0] (battery present)
Jul 30 11:31:51 seth-linux kernel: scsi host0: ahci
Jul 30 11:31:51 seth-linux kernel: scsi host1: ahci
Jul 30 11:31:51 seth-linux kernel: ata1: SATA max UDMA/133 abar m2048@0xa1137000 port 0xa1137100 irq 126
Jul 30 11:31:51 seth-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xa1137000 port 0xa1137180 irq 126
Jul 30 11:31:51 seth-linux kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jul 30 11:31:51 seth-linux kernel: ehci-pci: EHCI PCI platform driver
Jul 30 11:31:51 seth-linux kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jul 30 11:31:51 seth-linux kernel: ohci-pci: OHCI PCI platform driver
Jul 30 11:31:51 seth-linux kernel: uhci_hcd: USB Universal Host Controller Interface driver
Jul 30 11:31:51 seth-linux kernel: usbcore: registered new interface driver usbserial_generic
Jul 30 11:31:51 seth-linux kernel: usbserial: USB Serial support registered for generic
Jul 30 11:31:51 seth-linux kernel: rtc_cmos 00:03: RTC can wake from S4
Jul 30 11:31:51 seth-linux kernel: rtc_cmos 00:03: registered as rtc0
Jul 30 11:31:51 seth-linux kernel: rtc_cmos 00:03: setting system clock to 2021-07-30T17:31:49 UTC (1627666309)
Jul 30 11:31:51 seth-linux kernel: rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Jul 30 11:31:51 seth-linux kernel: intel_pstate: Intel P-state driver initializing
Jul 30 11:31:51 seth-linux kernel: ledtrig-cpu: registered to indicate activity on CPUs
Jul 30 11:31:51 seth-linux kernel: hid: raw HID events driver (C) Jiri Kosina
Jul 30 11:31:51 seth-linux kernel: drop_monitor: Initializing network drop monitor service
Jul 30 11:31:51 seth-linux kernel: Initializing XFRM netlink socket
Jul 30 11:31:51 seth-linux kernel: NET: Registered protocol family 10
Jul 30 11:31:51 seth-linux kernel: Freeing initrd memory: 22224K
Jul 30 11:31:51 seth-linux kernel: Segment Routing with IPv6
Jul 30 11:31:51 seth-linux kernel: RPL Segment Routing with IPv6
Jul 30 11:31:51 seth-linux kernel: NET: Registered protocol family 17
Jul 30 11:31:51 seth-linux kernel: microcode: sig=0x706a8, pf=0x1, revision=0x1a
Jul 30 11:31:51 seth-linux kernel: microcode: Microcode Update Driver: v2.2.
Jul 30 11:31:51 seth-linux kernel: resctrl: L2 allocation detected
Jul 30 11:31:51 seth-linux kernel: resctrl: L2DATA allocation detected
Jul 30 11:31:51 seth-linux kernel: resctrl: L2CODE allocation detected
Jul 30 11:31:51 seth-linux kernel: IPI shorthand broadcast: enabled
Jul 30 11:31:51 seth-linux kernel: sched_clock: Marking stable (779676101, 4287949)->(788597968, -4633918)
Jul 30 11:31:51 seth-linux kernel: registered taskstats version 1
Jul 30 11:31:51 seth-linux kernel: Loading compiled-in X.509 certificates
Jul 30 11:31:51 seth-linux kernel: Loaded X.509 cert 'Build time autogenerated kernel key: cc0381d1d81494d4948d33fc695c51750fd15a1d'
Jul 30 11:31:51 seth-linux kernel: zswap: loaded using pool lz4/z3fold
Jul 30 11:31:51 seth-linux kernel: Key type ._fscrypt registered
Jul 30 11:31:51 seth-linux kernel: Key type .fscrypt registered
Jul 30 11:31:51 seth-linux kernel: Key type fscrypt-provisioning registered
Jul 30 11:31:51 seth-linux kernel: PM:   Magic number: 13:542:543
Jul 30 11:31:51 seth-linux kernel: RAS: Correctable Errors collector initialized.
Jul 30 11:31:51 seth-linux kernel: ata1: SATA link down (SStatus 4 SControl 300)
Jul 30 11:31:51 seth-linux kernel: ata2: SATA link down (SStatus 4 SControl 300)
Jul 30 11:31:51 seth-linux kernel: Freeing unused decrypted memory: 2036K
Jul 30 11:31:51 seth-linux kernel: Freeing unused kernel image (initmem) memory: 1792K
Jul 30 11:31:51 seth-linux kernel: Write protecting the kernel read-only data: 26624k
Jul 30 11:31:51 seth-linux kernel: Freeing unused kernel image (text/rodata gap) memory: 2036K
Jul 30 11:31:51 seth-linux kernel: Freeing unused kernel image (rodata/data gap) memory: 1156K
Jul 30 11:31:51 seth-linux kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
Jul 30 11:31:51 seth-linux kernel: rodata_test: all tests were successful
Jul 30 11:31:51 seth-linux kernel: Run /init as init process
Jul 30 11:31:51 seth-linux kernel:   with arguments:
Jul 30 11:31:51 seth-linux kernel:     /init
Jul 30 11:31:51 seth-linux kernel:   with environment:
Jul 30 11:31:51 seth-linux kernel:     HOME=/
Jul 30 11:31:51 seth-linux kernel:     TERM=linux
Jul 30 11:31:51 seth-linux kernel:     BOOT_IMAGE=/boot/vmlinuz-linux
Jul 30 11:31:51 seth-linux kernel: fbcon: Taking over console
Jul 30 11:31:51 seth-linux kernel: Console: switching to colour frame buffer device 170x48
Jul 30 11:31:51 seth-linux kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Jul 30 11:31:51 seth-linux kernel: i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Jul 30 11:31:51 seth-linux kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 30 11:31:51 seth-linux kernel: xhci_hcd 0000:00:15.0: xHCI Host Controller
Jul 30 11:31:51 seth-linux kernel: xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
Jul 30 11:31:51 seth-linux kernel: xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
Jul 30 11:31:51 seth-linux kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
Jul 30 11:31:51 seth-linux kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 30 11:31:51 seth-linux kernel: usb usb1: Product: xHCI Host Controller
Jul 30 11:31:51 seth-linux kernel: usb usb1: Manufacturer: Linux 5.13.4-arch2-1 xhci-hcd
Jul 30 11:31:51 seth-linux kernel: usb usb1: SerialNumber: 0000:00:15.0
Jul 30 11:31:51 seth-linux kernel: hub 1-0:1.0: USB hub found
Jul 30 11:31:51 seth-linux kernel: hub 1-0:1.0: 9 ports detected
Jul 30 11:31:51 seth-linux kernel: xhci_hcd 0000:00:15.0: xHCI Host Controller
Jul 30 11:31:51 seth-linux kernel: xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
Jul 30 11:31:51 seth-linux kernel: xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
Jul 30 11:31:51 seth-linux kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13
Jul 30 11:31:51 seth-linux kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 30 11:31:51 seth-linux kernel: usb usb2: Product: xHCI Host Controller
Jul 30 11:31:51 seth-linux kernel: usb usb2: Manufacturer: Linux 5.13.4-arch2-1 xhci-hcd
Jul 30 11:31:51 seth-linux kernel: usb usb2: SerialNumber: 0000:00:15.0
Jul 30 11:31:51 seth-linux kernel: hub 2-0:1.0: USB hub found
Jul 30 11:31:51 seth-linux kernel: hub 2-0:1.0: 7 ports detected
Jul 30 11:31:51 seth-linux kernel: usb: port power management may be unreliable
Jul 30 11:31:51 seth-linux kernel: sdhci: Secure Digital Host Controller Interface driver
Jul 30 11:31:51 seth-linux kernel: sdhci: Copyright(c) Pierre Ossman
Jul 30 11:31:51 seth-linux kernel: sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:31cc] (rev 6)
Jul 30 11:31:51 seth-linux kernel: mmc0: CQHCI version 5.10
Jul 30 11:31:51 seth-linux kernel: mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
Jul 30 11:31:51 seth-linux kernel: sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:31d0] (rev 6)
Jul 30 11:31:51 seth-linux kernel: sdhci-pci 0000:00:1e.0: enabling device (0000 -> 0002)
Jul 30 11:31:51 seth-linux kernel: mmc1: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit
Jul 30 11:31:51 seth-linux kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Jul 30 11:31:51 seth-linux kernel: mmc0: Command Queue Engine enabled
Jul 30 11:31:51 seth-linux kernel: mmc0: new HS400 MMC card at address 0001
Jul 30 11:31:51 seth-linux kernel: mmcblk0: mmc0:0001 Biwin  57.7 GiB 
Jul 30 11:31:51 seth-linux kernel: mmcblk0boot0: mmc0:0001 Biwin  4.00 MiB 
Jul 30 11:31:51 seth-linux kernel: mmcblk0boot1: mmc0:0001 Biwin  4.00 MiB 
Jul 30 11:31:51 seth-linux kernel: mmcblk0rpmb: mmc0:0001 Biwin  4.00 MiB, chardev (238:0)
Jul 30 11:31:51 seth-linux kernel: random: fast init done
Jul 30 11:31:51 seth-linux kernel:  mmcblk0: p1 p2 p3 p4 p5 p6 p7
Jul 30 11:31:51 seth-linux kernel: usb 1-6: new high-speed USB device number 2 using xhci_hcd
Jul 30 11:31:51 seth-linux kernel: usb 1-6: New USB device found, idVendor=18d1, idProduct=4ee3, bcdDevice= 4.40
Jul 30 11:31:51 seth-linux kernel: usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jul 30 11:31:51 seth-linux kernel: usb 1-6: Product: Pixel 4a
Jul 30 11:31:51 seth-linux kernel: usb 1-6: Manufacturer: Google
Jul 30 11:31:51 seth-linux kernel: usb 1-6: SerialNumber: 15151JEC207237
Jul 30 11:31:51 seth-linux kernel: mmc0: Requiring re-tune after rpm resume
Jul 30 11:31:51 seth-linux kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
Jul 30 11:31:51 seth-linux kernel: usb 1-7: new high-speed USB device number 3 using xhci_hcd
Jul 30 11:31:51 seth-linux kernel: usb 1-7: New USB device found, idVendor=0bda, idProduct=d723, bcdDevice= 2.00
Jul 30 11:31:51 seth-linux kernel: usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jul 30 11:31:51 seth-linux kernel: usb 1-7: Product: 802.11n WLAN Adapter
Jul 30 11:31:51 seth-linux kernel: usb 1-7: Manufacturer: Realtek
Jul 30 11:31:51 seth-linux kernel: usb 1-7: SerialNumber: 00e04c000001
Jul 30 11:31:51 seth-linux systemd[1]: systemd 249.2-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
Jul 30 11:31:51 seth-linux systemd[1]: Detected architecture x86-64.
Jul 30 11:31:51 seth-linux systemd[1]: Hostname set to <seth-linux>.
Jul 30 11:31:51 seth-linux kernel: usb 1-8: new high-speed USB device number 4 using xhci_hcd
Jul 30 11:31:51 seth-linux kernel: random: lvmconfig: uninitialized urandom read (4 bytes read)
Jul 30 11:31:51 seth-linux kernel: usb 1-8: New USB device found, idVendor=2b16, idProduct=6689, bcdDevice= 3.04
Jul 30 11:31:51 seth-linux kernel: usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jul 30 11:31:51 seth-linux kernel: usb 1-8: Product: MTD camera
Jul 30 11:31:51 seth-linux kernel: usb 1-8: Manufacturer: SunplusIT Inc
Jul 30 11:31:51 seth-linux kernel: usb 1-8: SerialNumber: MTD-J20210304V000
Jul 30 11:31:51 seth-linux systemd[1]: Queued start job for default target Graphical Interface.
Jul 30 11:31:51 seth-linux systemd[1]: Created slice Slice /system/getty.
Jul 30 11:31:51 seth-linux systemd[1]: Created slice Slice /system/modprobe.
Jul 30 11:31:51 seth-linux systemd[1]: Created slice Slice /system/systemd-fsck.
Jul 30 11:31:51 seth-linux systemd[1]: Created slice User and Session Slice.
Jul 30 11:31:51 seth-linux systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Jul 30 11:31:51 seth-linux systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Jul 30 11:31:51 seth-linux systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Jul 30 11:31:51 seth-linux systemd[1]: Reached target Local Encrypted Volumes.
Jul 30 11:31:51 seth-linux systemd[1]: Reached target Path Units.
Jul 30 11:31:51 seth-linux systemd[1]: Reached target Remote File Systems.
Jul 30 11:31:51 seth-linux systemd[1]: Reached target Slice Units.
Jul 30 11:31:51 seth-linux systemd[1]: Reached target Local Verity Integrity Protected Volumes.
Jul 30 11:31:51 seth-linux systemd[1]: Listening on Device-mapper event daemon FIFOs.
Jul 30 11:31:51 seth-linux systemd[1]: Listening on LVM2 poll daemon socket.
Jul 30 11:31:51 seth-linux systemd[1]: Listening on Process Core Dump Socket.
Jul 30 11:31:51 seth-linux systemd[1]: Listening on Journal Audit Socket.
Jul 30 11:31:51 seth-linux systemd[1]: Listening on Journal Socket (/dev/log).
Jul 30 11:31:51 seth-linux systemd[1]: Listening on Journal Socket.
Jul 30 11:31:51 seth-linux systemd[1]: Listening on udev Control Socket.
Jul 30 11:31:51 seth-linux systemd[1]: Listening on udev Kernel Socket.
Jul 30 11:31:51 seth-linux systemd[1]: Mounting Huge Pages File System...
Jul 30 11:31:51 seth-linux systemd[1]: Mounting POSIX Message Queue File System...
Jul 30 11:31:51 seth-linux systemd[1]: Mounting Kernel Debug File System...
Jul 30 11:31:51 seth-linux systemd[1]: Mounting Kernel Trace File System...
Jul 30 11:31:51 seth-linux systemd[1]: Starting Create List of Static Device Nodes...
Jul 30 11:31:51 seth-linux systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
Jul 30 11:31:51 seth-linux systemd[1]: Starting Load Kernel Module configfs...
Jul 30 11:31:51 seth-linux kernel: random: lvm: uninitialized urandom read (4 bytes read)
Jul 30 11:31:51 seth-linux systemd[1]: Starting Load Kernel Module drm...
Jul 30 11:31:51 seth-linux systemd[1]: Starting Load Kernel Module fuse...
Jul 30 11:31:51 seth-linux systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Jul 30 11:31:51 seth-linux systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
Jul 30 11:31:51 seth-linux systemd[1]: Starting Journal Service...
Jul 30 11:31:51 seth-linux systemd[1]: Starting Load Kernel Modules...
Jul 30 11:31:51 seth-linux systemd[1]: Starting Remount Root and Kernel File Systems...
Jul 30 11:31:51 seth-linux systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
Jul 30 11:31:51 seth-linux systemd[1]: Starting Coldplug All udev Devices...
Jul 30 11:31:51 seth-linux systemd[1]: Mounted Huge Pages File System.
Jul 30 11:31:51 seth-linux systemd[1]: Mounted POSIX Message Queue File System.
Jul 30 11:31:51 seth-linux kernel: Linux agpgart interface v0.103
Jul 30 11:31:51 seth-linux systemd[1]: Mounted Kernel Debug File System.
Jul 30 11:31:51 seth-linux systemd[1]: Mounted Kernel Trace File System.
Jul 30 11:31:51 seth-linux systemd[1]: Finished Create List of Static Device Nodes.
Jul 30 11:31:51 seth-linux systemd[1]: modprobe@configfs.service: Deactivated successfully.
Jul 30 11:31:51 seth-linux systemd[1]: Finished Load Kernel Module configfs.
Jul 30 11:31:51 seth-linux systemd[1]: Mounting Kernel Configuration File System...
Jul 30 11:31:51 seth-linux systemd[1]: Mounted Kernel Configuration File System.
Jul 30 11:31:51 seth-linux kernel: fuse: init (API version 7.34)
Jul 30 11:31:51 seth-linux systemd[1]: modprobe@fuse.service: Deactivated successfully.
Jul 30 11:31:51 seth-linux systemd[1]: Finished Load Kernel Module fuse.
Jul 30 11:31:51 seth-linux systemd[1]: Mounting FUSE Control File System...
Jul 30 11:31:51 seth-linux systemd[1]: Mounted FUSE Control File System.
Jul 30 11:31:51 seth-linux kernel: EXT4-fs (mmcblk0p6): re-mounted. Opts: (null). Quota mode: none.
Jul 30 11:31:51 seth-linux systemd[1]: Finished Remount Root and Kernel File Systems.
Jul 30 11:31:51 seth-linux kernel: audit: type=1130 audit(1627666311.230:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:51 seth-linux systemd[1]: Condition check resulted in First Boot Wizard being skipped.
Jul 30 11:31:51 seth-linux systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Jul 30 11:31:51 seth-linux systemd[1]: Starting Load/Save Random Seed...
Jul 30 11:31:51 seth-linux systemd[1]: Condition check resulted in Create System Users being skipped.
Jul 30 11:31:51 seth-linux systemd[1]: Starting Create Static Device Nodes in /dev...
Jul 30 11:31:51 seth-linux systemd[1]: modprobe@drm.service: Deactivated successfully.
Jul 30 11:31:51 seth-linux systemd[1]: Finished Load Kernel Module drm.
Jul 30 11:31:51 seth-linux kernel: audit: type=1130 audit(1627666311.250:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:51 seth-linux kernel: audit: type=1131 audit(1627666311.250:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:51 seth-linux systemd[1]: Finished Load Kernel Modules.
Jul 30 11:31:51 seth-linux kernel: audit: type=1130 audit(1627666311.263:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:51 seth-linux systemd[1]: Starting Apply Kernel Variables...
Jul 30 11:31:51 seth-linux systemd[1]: Finished Apply Kernel Variables.
Jul 30 11:31:51 seth-linux kernel: audit: type=1130 audit(1627666311.283:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:51 seth-linux systemd-journald[196]: Journal started
Jul 30 11:31:51 seth-linux systemd-journald[196]: Runtime Journal (/run/log/journal/0e0eec857dd54d8893f394f6d4e25f1d) is 8.0M, max 187.4M, 179.4M free.
Jul 30 11:31:51 seth-linux systemd[1]: Started Journal Service.
Jul 30 11:31:51 seth-linux kernel: audit: type=1130 audit(1627666311.290:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:51 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:51 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:51 seth-linux audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:51 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:51 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:51 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:51 seth-linux systemd-modules-load[198]: Inserted module 'crypto_user'
Jul 30 11:31:51 seth-linux systemd-random-seed[204]: Kernel entropy pool is not initialized yet, waiting until it is.
Jul 30 11:31:51 seth-linux systemd[1]: Starting Flush Journal to Persistent Storage...
Jul 30 11:31:51 seth-linux systemd-journald[196]: Time spent on flushing to /var/log/journal/0e0eec857dd54d8893f394f6d4e25f1d is 251.525ms for 819 entries.
Jul 30 11:31:51 seth-linux systemd-journald[196]: System Journal (/var/log/journal/0e0eec857dd54d8893f394f6d4e25f1d) is 24.0M, max 1.1G, 1.1G free.
Jul 30 11:31:51 seth-linux kernel: audit: type=1130 audit(1627666311.333:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:51 seth-linux kernel: audit: type=1334 audit(1627666311.333:9): prog-id=14 op=LOAD
Jul 30 11:31:51 seth-linux kernel: audit: type=1334 audit(1627666311.333:10): prog-id=15 op=LOAD
Jul 30 11:31:51 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:51 seth-linux audit: BPF prog-id=14 op=LOAD
Jul 30 11:31:51 seth-linux audit: BPF prog-id=15 op=LOAD
Jul 30 11:31:51 seth-linux audit: BPF prog-id=16 op=LOAD
Jul 30 11:31:51 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:51 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:51 seth-linux systemd[1]: Finished Create Static Device Nodes in /dev.
Jul 30 11:31:51 seth-linux systemd[1]: Starting Rule-based Manager for Device Events and Files...
Jul 30 11:31:51 seth-linux systemd[1]: Finished Coldplug All udev Devices.
Jul 30 11:31:51 seth-linux systemd[1]: Started Rule-based Manager for Device Events and Files.
Jul 30 11:31:51 seth-linux systemd[1]: Finished Flush Journal to Persistent Storage.
Jul 30 11:31:51 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:51 seth-linux kernel: input: Intel HID events as /devices/platform/INT33D5:00/input/input3
Jul 30 11:31:51 seth-linux kernel: intel-hid INT33D5:00: platform supports 5 button array
Jul 30 11:31:51 seth-linux kernel: input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input4
Jul 30 11:31:51 seth-linux kernel: idma64 idma64.0: Found Intel integrated DMA 64-bit
Jul 30 11:31:51 seth-linux kernel: kxcjk1013 i2c-KIOX020A:00: mounting matrix not found: using identity...
Jul 30 11:31:51 seth-linux kernel: kxcjk1013 i2c-KIOX020A:00: supply vdd not found, using dummy regulator
Jul 30 11:31:51 seth-linux kernel: kxcjk1013 i2c-KIOX020A:00: supply vddio not found, using dummy regulator
Jul 30 11:31:51 seth-linux kernel: idma64 idma64.1: Found Intel integrated DMA 64-bit
Jul 30 11:31:51 seth-linux mtp-probe[235]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:15.0/usb1/1-6"
Jul 30 11:31:51 seth-linux mtp-probe[235]: bus: 1, device: 2 was not an MTP device
Jul 30 11:31:51 seth-linux kernel: idma64 idma64.2: Found Intel integrated DMA 64-bit
Jul 30 11:31:51 seth-linux kernel: proc_thermal 0000:00:00.1: Creating sysfs group for PROC_THERMAL_PCI
Jul 30 11:31:51 seth-linux mtp-probe[237]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:15.0/usb1/1-7"
Jul 30 11:31:51 seth-linux mtp-probe[237]: bus: 1, device: 3 was not an MTP device
Jul 30 11:31:51 seth-linux mtp-probe[238]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:15.0/usb1/1-8"
Jul 30 11:31:51 seth-linux mtp-probe[238]: bus: 1, device: 4 was not an MTP device
Jul 30 11:31:51 seth-linux kernel: idma64 idma64.3: Found Intel integrated DMA 64-bit
Jul 30 11:31:51 seth-linux kernel: usbcore: registered new interface driver cdc_ether
Jul 30 11:31:51 seth-linux kernel: rndis_host 1-6:1.0 usb0: register 'rndis_host' at usb-0000:00:15.0-6, RNDIS device, ba:a8:df:be:5f:f9
Jul 30 11:31:51 seth-linux kernel: usbcore: registered new interface driver rndis_host
Jul 30 11:31:51 seth-linux kernel: idma64 idma64.4: Found Intel integrated DMA 64-bit
Jul 30 11:31:51 seth-linux kernel: mc: Linux media interface: v0.10
Jul 30 11:31:52 seth-linux kernel: Bluetooth: Core ver 2.22
Jul 30 11:31:52 seth-linux kernel: NET: Registered protocol family 31
Jul 30 11:31:52 seth-linux kernel: Bluetooth: HCI device and connection manager initialized
Jul 30 11:31:52 seth-linux kernel: Bluetooth: HCI socket layer initialized
Jul 30 11:31:52 seth-linux kernel: Bluetooth: L2CAP socket layer initialized
Jul 30 11:31:52 seth-linux kernel: Bluetooth: SCO socket layer initialized
Jul 30 11:31:52 seth-linux kernel: Goodix-TS i2c-GDIX1002:00: supply AVDD28 not found, using dummy regulator
Jul 30 11:31:52 seth-linux kernel: Goodix-TS i2c-GDIX1002:00: supply VDDIO not found, using dummy regulator
Jul 30 11:31:52 seth-linux kernel: Goodix-TS i2c-GDIX1002:00: ID 927, version: 1040
Jul 30 11:31:52 seth-linux kernel: usbcore: registered new interface driver btusb
Jul 30 11:31:52 seth-linux kernel: input: Goodix Capacitive TouchScreen as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-4/i2c-GDIX1002:00/input/input5
Jul 30 11:31:52 seth-linux kernel: kxcjk1013 i2c-KIOX010A:00: mounting matrix not found: using identity...
Jul 30 11:31:52 seth-linux kernel: kxcjk1013 i2c-KIOX010A:00: supply vdd not found, using dummy regulator
Jul 30 11:31:52 seth-linux kernel: kxcjk1013 i2c-KIOX010A:00: supply vddio not found, using dummy regulator
Jul 30 11:31:52 seth-linux kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723
Jul 30 11:31:52 seth-linux kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Jul 30 11:31:52 seth-linux kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_fw.bin
Jul 30 11:31:52 seth-linux kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_config.bin
Jul 30 11:31:52 seth-linux kernel: Bluetooth: hci0: RTL: cfg_sz 10, total sz 33266
Jul 30 11:31:52 seth-linux kernel: snd_hda_intel 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if info 0x040100
Jul 30 11:31:52 seth-linux kernel: videodev: Linux video capture interface: v2.00
Jul 30 11:31:52 seth-linux kernel: idma64 idma64.5: Found Intel integrated DMA 64-bit
Jul 30 11:31:52 seth-linux kernel: checking generic (90000000 410000) vs hw (a0000000 1000000)
Jul 30 11:31:52 seth-linux kernel: checking generic (90000000 410000) vs hw (90000000 10000000)
Jul 30 11:31:52 seth-linux kernel: fb0: switching to inteldrmfb from EFI VGA
Jul 30 11:31:52 seth-linux kernel: Console: switching to colour dummy device 80x25
Jul 30 11:31:52 seth-linux kernel: i915 0000:00:02.0: vgaarb: deactivate vga console
Jul 30 11:31:52 seth-linux kernel: i915 0000:00:02.0: [drm] couldn't get memory information
Jul 30 11:31:52 seth-linux kernel: idma64 idma64.6: Found Intel integrated DMA 64-bit
Jul 30 11:31:52 seth-linux kernel: idma64 idma64.7: Found Intel integrated DMA 64-bit
Jul 30 11:31:52 seth-linux kernel: i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
Jul 30 11:31:52 seth-linux kernel: idma64 idma64.8: Found Intel integrated DMA 64-bit
Jul 30 11:31:52 seth-linux kernel: idma64 idma64.9: Found Intel integrated DMA 64-bit
Jul 30 11:31:52 seth-linux kernel: idma64 idma64.12: Found Intel integrated DMA 64-bit
Jul 30 11:31:52 seth-linux kernel: i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
Jul 30 11:31:52 seth-linux kernel: idma64 idma64.13: Found Intel integrated DMA 64-bit
Jul 30 11:31:52 seth-linux kernel: idma64 idma64.14: Found Intel integrated DMA 64-bit
Jul 30 11:31:52 seth-linux kernel: [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
Jul 30 11:31:52 seth-linux kernel: ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
Jul 30 11:31:52 seth-linux kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
Jul 30 11:31:52 seth-linux kernel: snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
Jul 30 11:31:52 seth-linux kernel: fbcon: i915drmfb (fb0) is primary device
Jul 30 11:31:52 seth-linux kernel: input: PC Speaker as /devices/platform/pcspkr/input/input7
Jul 30 11:31:52 seth-linux kernel: i801_smbus 0000:00:1f.1: SPD Write Disable is set
Jul 30 11:31:52 seth-linux kernel: i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
Jul 30 11:31:52 seth-linux kernel: i2c i2c-13: 4/4 memory slots populated (from DMI)
Jul 30 11:31:52 seth-linux systemd[1]: Found device /dev/disk/by-uuid/E928-97C2.
Jul 30 11:31:52 seth-linux kernel: usb 1-8: 3:1: cannot get freq at ep 0x86
Jul 30 11:31:52 seth-linux kernel: Bluetooth: hci0: RTL: fw version 0x828a96f1
Jul 30 11:31:52 seth-linux kernel: RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
Jul 30 11:31:52 seth-linux kernel: RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
Jul 30 11:31:52 seth-linux kernel: RAPL PMU: hw unit of domain package 2^-14 Joules
Jul 30 11:31:52 seth-linux kernel: RAPL PMU: hw unit of domain dram 2^-14 Joules
Jul 30 11:31:52 seth-linux kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
Jul 30 11:31:52 seth-linux kernel: cryptd: max_cpu_qlen set to 1000
Jul 30 11:31:52 seth-linux kernel: SSE version of gcm_enc/dec engaged.
Jul 30 11:31:52 seth-linux kernel: usb 1-8: 3:2: cannot get freq at ep 0x86
Jul 30 11:31:52 seth-linux kernel: usb 1-8: 3:3: cannot set freq 16000 to ep 0x86
Jul 30 11:31:52 seth-linux kernel: usb 1-8: 3:4: cannot set freq 22050 to ep 0x86
Jul 30 11:31:52 seth-linux kernel: input: HTIX5288:00 0911:5288 Mouse as /devices/pci0000:00/0000:00:17.3/i2c_designware.7/i2c-7/i2c-HTIX5288:00/0018:0911:5288.0001/input/input8
Jul 30 11:31:52 seth-linux kernel: input: HTIX5288:00 0911:5288 Touchpad as /devices/pci0000:00/0000:00:17.3/i2c_designware.7/i2c-7/i2c-HTIX5288:00/0018:0911:5288.0001/input/input9
Jul 30 11:31:52 seth-linux kernel: input: HTIX5288:00 0911:5288 as /devices/pci0000:00/0000:00:17.3/i2c_designware.7/i2c-7/i2c-HTIX5288:00/0018:0911:5288.0001/input/input10
Jul 30 11:31:52 seth-linux kernel: hid-generic 0018:0911:5288.0001: input,hidraw0: I2C HID v1.00 Mouse [HTIX5288:00 0911:5288] on i2c-HTIX5288:00
Jul 30 11:31:52 seth-linux systemd-udevd[229]: Using default interface naming scheme 'v249'.
Jul 30 11:31:52 seth-linux kernel: rndis_host 1-6:1.0 enp0s21f0u6: renamed from usb0
Jul 30 11:31:52 seth-linux kernel: intel_rapl_common: Found RAPL domain package
Jul 30 11:31:52 seth-linux kernel: intel_rapl_common: Found RAPL domain core
Jul 30 11:31:52 seth-linux kernel: intel_rapl_common: Found RAPL domain uncore
Jul 30 11:31:52 seth-linux kernel: intel_rapl_common: Found RAPL domain dram
Jul 30 11:31:52 seth-linux kernel: mei_hdcp 0000:00:0f.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
Jul 30 11:31:52 seth-linux kernel: usb 1-8: 3:5: cannot get freq at ep 0x86
Jul 30 11:31:52 seth-linux kernel: usb 1-8: 3:6: cannot set freq 32000 to ep 0x86
Jul 30 11:31:52 seth-linux kernel: usb 1-8: 3:7: cannot set freq 44100 to ep 0x86
Jul 30 11:31:52 seth-linux kernel: usb 1-8: 3:8: cannot set freq 48000 to ep 0x86
Jul 30 11:31:52 seth-linux kernel: dw-apb-uart.8: ttyS4 at MMIO 0xa1126000 (irq = 4, base_baud = 115200) is a 16550A
Jul 30 11:31:52 seth-linux kernel: usb 1-8: Warning! Unlikely big volume range (=4096), cval->res is probably wrong.
Jul 30 11:31:52 seth-linux kernel: usb 1-8: [7] FU [Mic Capture Volume] ch = 1, val = 0/4096/1
Jul 30 11:31:52 seth-linux kernel: usbcore: registered new interface driver snd-usb-audio
Jul 30 11:31:52 seth-linux kernel: usb 1-8: Found UVC 1.00 device MTD camera (2b16:6689)
Jul 30 11:31:52 seth-linux kernel: dw-apb-uart.9: ttyS5 at MMIO 0xa1124000 (irq = 5, base_baud = 115200) is a 16550A
Jul 30 11:31:52 seth-linux kernel: dw-apb-uart.10: ttyS6 at MMIO 0xfea10000 (irq = 6, base_baud = 115200) is a 16550A
Jul 30 11:31:52 seth-linux kernel: dw-apb-uart.11: ttyS7 at MMIO 0xa1122000 (irq = 7, base_baud = 115200) is a 16550A
Jul 30 11:31:52 seth-linux systemd-udevd[225]: Using default interface naming scheme 'v249'.
Jul 30 11:31:52 seth-linux kernel: input: MTD camera: MTD camera as /devices/pci0000:00/0000:00:15.0/usb1/1-8/1-8:1.0/input/input11
Jul 30 11:31:52 seth-linux kernel: usbcore: registered new interface driver uvcvideo
Jul 30 11:31:52 seth-linux kernel: mousedev: PS/2 mouse device common for all mice
Jul 30 11:31:52 seth-linux kernel: input: HTIX5288:00 0911:5288 Mouse as /devices/pci0000:00/0000:00:17.3/i2c_designware.7/i2c-7/i2c-HTIX5288:00/0018:0911:5288.0001/input/input12
Jul 30 11:31:52 seth-linux kernel: input: HTIX5288:00 0911:5288 Touchpad as /devices/pci0000:00/0000:00:17.3/i2c_designware.7/i2c-7/i2c-HTIX5288:00/0018:0911:5288.0001/input/input13
Jul 30 11:31:52 seth-linux kernel: input: HTIX5288:00 0911:5288 UNKNOWN as /devices/pci0000:00/0000:00:17.3/i2c_designware.7/i2c-7/i2c-HTIX5288:00/0018:0911:5288.0001/input/input14
Jul 30 11:31:52 seth-linux kernel: hid-multitouch 0018:0911:5288.0001: input,hidraw0: I2C HID v1.00 Mouse [HTIX5288:00 0911:5288] on i2c-HTIX5288:00
Jul 30 11:31:52 seth-linux kernel: intel_telemetry_core Init
Jul 30 11:31:52 seth-linux kernel: Invalid pltconfig, ensure IPC1 device is enabled in BIOS
Jul 30 11:31:52 seth-linux kernel: Invalid pltconfig, ensure IPC1 device is enabled in BIOS
Jul 30 11:31:53 seth-linux kernel: random: crng init done
Jul 30 11:31:53 seth-linux kernel: Console: switching to colour frame buffer device 170x48
Jul 30 11:31:53 seth-linux kernel: i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
Jul 30 11:31:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
Jul 30 11:31:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux systemd[1]: Finished Load/Save Random Seed.
Jul 30 11:31:53 seth-linux systemd[1]: Found device /dev/disk/by-uuid/7b5f6f13-2951-475d-8518-2bd094cbe099.
Jul 30 11:31:53 seth-linux kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input15
Jul 30 11:31:53 seth-linux kernel: input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input16
Jul 30 11:31:53 seth-linux kernel: input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input17
Jul 30 11:31:53 seth-linux kernel: input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input18
Jul 30 11:31:53 seth-linux kernel: input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input19
Jul 30 11:31:53 seth-linux systemd[1]: Created slice Slice /system/systemd-backlight.
Jul 30 11:31:53 seth-linux systemd[1]: Reached target Preparation for Local File Systems.
Jul 30 11:31:53 seth-linux systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Jul 30 11:31:53 seth-linux systemd[1]: Activating swap /dev/disk/by-uuid/7b5f6f13-2951-475d-8518-2bd094cbe099...
Jul 30 11:31:53 seth-linux systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
Jul 30 11:31:53 seth-linux systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:intel_backlight...
Jul 30 11:31:53 seth-linux systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Jul 30 11:31:53 seth-linux systemd[1]: Condition check resulted in First Boot Wizard being skipped.
Jul 30 11:31:53 seth-linux systemd[1]: Condition check resulted in First Boot Complete being skipped.
Jul 30 11:31:53 seth-linux systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
Jul 30 11:31:53 seth-linux systemd[1]: Starting File System Check on /dev/disk/by-uuid/E928-97C2...
Jul 30 11:31:53 seth-linux systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Jul 30 11:31:53 seth-linux systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
Jul 30 11:31:53 seth-linux systemd[1]: Condition check resulted in Create System Users being skipped.
Jul 30 11:31:53 seth-linux systemd[1]: Starting Load/Save RF Kill Switch Status...
Jul 30 11:31:53 seth-linux kernel: Adding 523260k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:523260k SSFS
Jul 30 11:31:53 seth-linux systemd[1]: Activated swap /dev/disk/by-uuid/7b5f6f13-2951-475d-8518-2bd094cbe099.
Jul 30 11:31:53 seth-linux systemd[1]: Started Load/Save RF Kill Switch Status.
Jul 30 11:31:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux systemd[1]: Finished Load/Save Screen Backlight Brightness of backlight:intel_backlight.
Jul 30 11:31:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux systemd[1]: Reached target Swaps.
Jul 30 11:31:53 seth-linux systemd[1]: Mounting Temporary Directory /tmp...
Jul 30 11:31:53 seth-linux systemd[1]: Mounted Temporary Directory /tmp.
Jul 30 11:31:53 seth-linux systemd-fsck[322]: fsck.fat 4.2 (2021-01-31)
Jul 30 11:31:53 seth-linux systemd-fsck[322]: /dev/mmcblk0p4: 7 files, 566/201616 clusters
Jul 30 11:31:53 seth-linux systemd[1]: Finished File System Check on /dev/disk/by-uuid/E928-97C2.
Jul 30 11:31:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-E928\x2d97C2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux systemd[1]: Mounting /boot/efi...
Jul 30 11:31:53 seth-linux systemd[1]: Mounted /boot/efi.
Jul 30 11:31:53 seth-linux systemd[1]: Reached target Local File Systems.
Jul 30 11:31:53 seth-linux systemd[1]: Condition check resulted in Rebuild Dynamic Linker Cache being skipped.
Jul 30 11:31:53 seth-linux systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Jul 30 11:31:53 seth-linux systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Jul 30 11:31:53 seth-linux systemd[1]: Starting Create Volatile Files and Directories...
Jul 30 11:31:53 seth-linux systemd[1]: Finished Create Volatile Files and Directories.
Jul 30 11:31:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux systemd[1]: Condition check resulted in Rebuild Journal Catalog being skipped.
Jul 30 11:31:53 seth-linux systemd[1]: Condition check resulted in Update is Completed being skipped.
Jul 30 11:31:53 seth-linux systemd[1]: Starting Record System Boot/Shutdown in UTMP...
Jul 30 11:31:53 seth-linux audit[328]: SYSTEM_BOOT pid=328 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux systemd[1]: Finished Record System Boot/Shutdown in UTMP.
Jul 30 11:31:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux systemd[1]: Reached target System Initialization.
Jul 30 11:31:53 seth-linux systemd[1]: Started Daily man-db regeneration.
Jul 30 11:31:53 seth-linux systemd[1]: Started Daily verification of password and group files.
Jul 30 11:31:53 seth-linux systemd[1]: Started Daily Cleanup of Temporary Directories.
Jul 30 11:31:53 seth-linux systemd[1]: Reached target Timer Units.
Jul 30 11:31:53 seth-linux systemd[1]: Listening on D-Bus System Message Bus Socket.
Jul 30 11:31:53 seth-linux systemd[1]: Reached target Socket Units.
Jul 30 11:31:53 seth-linux systemd[1]: Reached target Basic System.
Jul 30 11:31:53 seth-linux systemd[1]: Starting Save/Restore Sound Card State...
Jul 30 11:31:53 seth-linux systemd[1]: Condition check resulted in Manage Sound Card State (restore and store) being skipped.
Jul 30 11:31:53 seth-linux alsactl[329]: alsa-lib parser.c:242:(error_node) UCM is not supported for this HDA model (HDA Intel PCH at 0xa1110000 irq 132)
Jul 30 11:31:53 seth-linux alsactl[329]: alsa-lib main.c:1405:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -6
Jul 30 11:31:53 seth-linux alsactl[329]: alsa-lib main.c:1405:(snd_use_case_mgr_open) error: failed to import hw:1 use case configuration -2
Jul 30 11:31:53 seth-linux systemd[1]: Starting Bluetooth service...
Jul 30 11:31:53 seth-linux systemd[1]: Starting Apply cpupower configuration...
Jul 30 11:31:53 seth-linux systemd[1]: Started D-Bus System Message Bus.
Jul 30 11:31:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux systemd[1]: Starting Network Manager...
Jul 30 11:31:53 seth-linux audit: BPF prog-id=17 op=LOAD
Jul 30 11:31:53 seth-linux audit: BPF prog-id=18 op=LOAD
Jul 30 11:31:53 seth-linux audit: BPF prog-id=19 op=LOAD
Jul 30 11:31:53 seth-linux bluetoothd[330]: Bluetooth daemon 5.60
Jul 30 11:31:53 seth-linux systemd[1]: Starting User Login Management...
Jul 30 11:31:53 seth-linux systemd[1]: Finished Save/Restore Sound Card State.
Jul 30 11:31:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=alsa-restore comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux systemd[1]: Finished Apply cpupower configuration.
Jul 30 11:31:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cpupower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux systemd[1]: Reached target Sound Card.
Jul 30 11:31:53 seth-linux systemd[1]: Started Bluetooth service.
Jul 30 11:31:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux systemd[1]: Reached target Bluetooth Support.
Jul 30 11:31:53 seth-linux bluetoothd[330]: Starting SDP server
Jul 30 11:31:53 seth-linux systemd-logind[334]: New seat seat0.
Jul 30 11:31:53 seth-linux kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Jul 30 11:31:53 seth-linux kernel: Bluetooth: BNEP filters: protocol multicast
Jul 30 11:31:53 seth-linux kernel: Bluetooth: BNEP socket layer initialized
Jul 30 11:31:53 seth-linux bluetoothd[330]: Bluetooth management interface 1.20 initialized
Jul 30 11:31:53 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.1' (uid=0 pid=330 comm="/usr/lib/bluetooth/bluetoothd ")
Jul 30 11:31:53 seth-linux audit: BPF prog-id=20 op=LOAD
Jul 30 11:31:53 seth-linux audit: BPF prog-id=21 op=LOAD
Jul 30 11:31:53 seth-linux audit: BPF prog-id=22 op=LOAD
Jul 30 11:31:53 seth-linux systemd-logind[334]: Watching system buttons on /dev/input/event0 (Lid Switch)
Jul 30 11:31:53 seth-linux systemd-logind[334]: Watching system buttons on /dev/input/event1 (Power Button)
Jul 30 11:31:53 seth-linux systemd-logind[334]: Watching system buttons on /dev/input/event3 (Intel HID events)
Jul 30 11:31:53 seth-linux systemd-logind[334]: Watching system buttons on /dev/input/event4 (Intel HID 5 button array)
Jul 30 11:31:53 seth-linux systemd-logind[334]: Watching system buttons on /dev/input/event2 (AT Translated Set 2 keyboard)
Jul 30 11:31:53 seth-linux systemd[1]: Starting Hostname Service...
Jul 30 11:31:53 seth-linux systemd[1]: Started User Login Management.
Jul 30 11:31:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux kernel: NET: Registered protocol family 38
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.8311] NetworkManager (version 1.32.4-1) is starting... (for the first time)
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.8311] Read config: /etc/NetworkManager/NetworkManager.conf (lib: 20-connectivity.conf)
Jul 30 11:31:53 seth-linux systemd[1]: Started Network Manager.
Jul 30 11:31:53 seth-linux systemd[1]: Reached target Network.
Jul 30 11:31:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.8394] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Jul 30 11:31:53 seth-linux systemd[1]: Starting Permit User Sessions...
Jul 30 11:31:53 seth-linux systemd[1]: Finished Permit User Sessions.
Jul 30 11:31:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux systemd[1]: Started Getty on tty1.
Jul 30 11:31:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux systemd[1]: Reached target Login Prompts.
Jul 30 11:31:53 seth-linux systemd[1]: Reached target Multi-User System.
Jul 30 11:31:53 seth-linux systemd[1]: Reached target Graphical Interface.
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.8710] manager[0x55e0a9cee000]: monitoring kernel firmware directory '/lib/firmware'.
Jul 30 11:31:53 seth-linux dbus-daemon[332]: [system] Successfully activated service 'org.freedesktop.hostname1'
Jul 30 11:31:53 seth-linux systemd[1]: Started Hostname Service.
Jul 30 11:31:53 seth-linux systemd[1]: Startup finished in 8.146s (firmware) + 2.225s (loader) + 1.875s (kernel) + 3.149s (userspace) = 15.396s.
Jul 30 11:31:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9001] hostname: hostname: using hostnamed
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9002] hostname: hostname changed from (none) to "seth-linux"
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9008] dns-mgr[0x55e0a9ca7250]: init: dns=default,systemd-resolved rc-manager=symlink
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9015] manager[0x55e0a9cee000]: rfkill: Wi-Fi hardware radio set enabled
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9016] manager[0x55e0a9cee000]: rfkill: WWAN hardware radio set enabled
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9227] Loaded device plugin: NMWifiFactory (/usr/lib/NetworkManager/1.32.4-1/libnm-device-plugin-wifi.so)
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9302] Loaded device plugin: NMWwanFactory (/usr/lib/NetworkManager/1.32.4-1/libnm-device-plugin-wwan.so)
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9340] Loaded device plugin: NMBluezManager (/usr/lib/NetworkManager/1.32.4-1/libnm-device-plugin-bluetooth.so)
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9586] Loaded device plugin: NMTeamFactory (/usr/lib/NetworkManager/1.32.4-1/libnm-device-plugin-team.so)
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9601] Loaded device plugin: NMOvsFactory (/usr/lib/NetworkManager/1.32.4-1/libnm-device-plugin-ovs.so)
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9611] Loaded device plugin: NMAtmManager (/usr/lib/NetworkManager/1.32.4-1/libnm-device-plugin-adsl.so)
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9616] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9617] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9617] manager: Networking is enabled by state file
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9628] dhcp-init: Using DHCP client 'internal'
Jul 30 11:31:53 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.3' (uid=0 pid=333 comm="/usr/bin/NetworkManager --no-daemon ")
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9675] settings: Loaded settings plugin: keyfile (internal)
Jul 30 11:31:53 seth-linux systemd[1]: Starting Network Manager Script Dispatcher Service...
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9733] device (lo): carrier: link connected
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9738] manager: (lo): new Generic device (/org/freedesktop/NetworkManager/Devices/1)
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9756] manager: (enp0s21f0u6): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9796] settings: (enp0s21f0u6): created default wired connection 'Wired connection 1'
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9803] device (enp0s21f0u6): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9812] device (enp0s21f0u6): carrier: link connected
Jul 30 11:31:53 seth-linux dbus-daemon[332]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jul 30 11:31:53 seth-linux systemd[1]: Started Network Manager Script Dispatcher Service.
Jul 30 11:31:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9889] ovsdb: Could not connect: No such file or directory
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9891] ovsdb: disconnected from ovsdb
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9917] device (enp0s21f0u6): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9927] policy: auto-activating connection 'Wired connection 1' (ae170b8a-c02d-32eb-9524-b06046c97a7f)
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9933] device (enp0s21f0u6): Activation: starting connection 'Wired connection 1' (ae170b8a-c02d-32eb-9524-b06046c97a7f)
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9934] device (enp0s21f0u6): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9938] manager: NetworkManager state is now CONNECTING
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9942] device (enp0s21f0u6): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9949] device (enp0s21f0u6): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Jul 30 11:31:53 seth-linux NetworkManager[333]: <info>  [1627666313.9964] dhcp4 (enp0s21f0u6): activation: beginning transaction (timeout in 45 seconds)
Jul 30 11:31:54 seth-linux NetworkManager[333]: <info>  [1627666314.0109] dhcp4 (enp0s21f0u6): state changed unknown -> bound, address=192.168.23.166
Jul 30 11:31:54 seth-linux NetworkManager[333]: <info>  [1627666314.0125] device (enp0s21f0u6): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Jul 30 11:31:54 seth-linux NetworkManager[333]: <info>  [1627666314.0151] device (enp0s21f0u6): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Jul 30 11:31:54 seth-linux NetworkManager[333]: <info>  [1627666314.0153] device (enp0s21f0u6): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Jul 30 11:31:54 seth-linux NetworkManager[333]: <info>  [1627666314.0156] manager: NetworkManager state is now CONNECTED_LOCAL
Jul 30 11:31:54 seth-linux NetworkManager[333]: <info>  [1627666314.0159] manager: NetworkManager state is now CONNECTED_SITE
Jul 30 11:31:54 seth-linux NetworkManager[333]: <info>  [1627666314.0161] policy: set 'Wired connection 1' (enp0s21f0u6) as default for IPv4 routing and DNS
Jul 30 11:31:54 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.3' (uid=0 pid=333 comm="/usr/bin/NetworkManager --no-daemon ")
Jul 30 11:31:54 seth-linux dbus-daemon[332]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Jul 30 11:31:54 seth-linux NetworkManager[333]: <info>  [1627666314.0210] device (enp0s21f0u6): Activation: successful, device activated.
Jul 30 11:31:54 seth-linux NetworkManager[333]: <info>  [1627666314.0239] manager: startup complete
Jul 30 11:31:54 seth-linux NetworkManager[333]: <info>  [1627666314.4164] manager: NetworkManager state is now CONNECTED_GLOBAL
Jul 30 11:31:57 seth-linux audit[357]: USER_AUTH pid=357 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="seth" exe="/usr/bin/login" hostname=seth-linux addr=? terminal=/dev/tty1 res=success'
Jul 30 11:31:57 seth-linux kernel: kauditd_printk_skb: 28 callbacks suppressed
Jul 30 11:31:57 seth-linux kernel: audit: type=1100 audit(1627666317.860:39): pid=357 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="seth" exe="/usr/bin/login" hostname=seth-linux addr=? terminal=/dev/tty1 res=success'
Jul 30 11:31:57 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.6' (uid=0 pid=357 comm="/bin/login -p --      ")
Jul 30 11:31:57 seth-linux dbus-daemon[332]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
Jul 30 11:31:57 seth-linux login[357]: pam_systemd_home(login:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
Jul 30 11:31:57 seth-linux audit[357]: USER_ACCT pid=357 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/login" hostname=seth-linux addr=? terminal=/dev/tty1 res=success'
Jul 30 11:31:57 seth-linux kernel: audit: type=1101 audit(1627666317.896:40): pid=357 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/login" hostname=seth-linux addr=? terminal=/dev/tty1 res=success'
Jul 30 11:31:57 seth-linux audit[357]: CRED_ACQ pid=357 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="seth" exe="/usr/bin/login" hostname=seth-linux addr=? terminal=/dev/tty1 res=success'
Jul 30 11:31:57 seth-linux audit[357]: SYSCALL arch=c000003e syscall=1 success=yes exit=4 a0=5 a1=7ffed2c6fee0 a2=4 a3=3e8 items=0 ppid=1 pid=357 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=1000 fsgid=0 tty=tty1 ses=1 comm="login" exe="/usr/bin/login" key=(null)
Jul 30 11:31:57 seth-linux audit: PROCTITLE proctitle=2F62696E2F6C6F67696E002D70002D2D
Jul 30 11:31:57 seth-linux kernel: audit: type=1103 audit(1627666317.903:41): pid=357 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="seth" exe="/usr/bin/login" hostname=seth-linux addr=? terminal=/dev/tty1 res=success'
Jul 30 11:31:57 seth-linux kernel: audit: type=1006 audit(1627666317.903:42): pid=357 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
Jul 30 11:31:57 seth-linux kernel: audit: type=1300 audit(1627666317.903:42): arch=c000003e syscall=1 success=yes exit=4 a0=5 a1=7ffed2c6fee0 a2=4 a3=3e8 items=0 ppid=1 pid=357 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=1000 fsgid=0 tty=tty1 ses=1 comm="login" exe="/usr/bin/login" key=(null)
Jul 30 11:31:57 seth-linux kernel: audit: type=1327 audit(1627666317.903:42): proctitle=2F62696E2F6C6F67696E002D70002D2D
Jul 30 11:31:57 seth-linux login[357]: pam_unix(login:session): session opened for user seth(uid=1000) by LOGIN(uid=0)
Jul 30 11:31:57 seth-linux systemd[1]: Created slice User Slice of UID 1000.
Jul 30 11:31:57 seth-linux systemd[1]: Starting User Runtime Directory /run/user/1000...
Jul 30 11:31:57 seth-linux systemd-logind[334]: New session 1 of user seth.
Jul 30 11:31:57 seth-linux kernel: audit: type=1130 audit(1627666317.930:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:57 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:57 seth-linux systemd[1]: Finished User Runtime Directory /run/user/1000.
Jul 30 11:31:57 seth-linux systemd[1]: Starting User Manager for UID 1000...
Jul 30 11:31:57 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.8' (uid=0 pid=369 comm="(systemd) ")
Jul 30 11:31:57 seth-linux dbus-daemon[332]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
Jul 30 11:31:57 seth-linux systemd[369]: pam_systemd_home(systemd-user:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
Jul 30 11:31:57 seth-linux audit[369]: USER_ACCT pid=369 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="seth" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:57 seth-linux audit[369]: CRED_ACQ pid=369 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="seth" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
Jul 30 11:31:57 seth-linux audit[369]: SYSCALL arch=c000003e syscall=1 success=yes exit=4 a0=9 a1=7fff5d83c930 a2=4 a3=3e8 items=0 ppid=1 pid=369 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="(systemd)" exe="/usr/lib/systemd/systemd" key=(null)
Jul 30 11:31:57 seth-linux audit: PROCTITLE proctitle="(systemd)"
Jul 30 11:31:57 seth-linux systemd[369]: pam_warn(systemd-user:setcred): function=[pam_sm_setcred] flags=0x8002 service=[systemd-user] terminal=[] user=[seth] ruser=[<unknown>] rhost=[<unknown>]
Jul 30 11:31:57 seth-linux kernel: audit: type=1101 audit(1627666317.940:44): pid=369 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="seth" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:57 seth-linux kernel: audit: type=1103 audit(1627666317.940:45): pid=369 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="seth" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
Jul 30 11:31:57 seth-linux kernel: audit: type=1006 audit(1627666317.940:46): pid=369 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
Jul 30 11:31:57 seth-linux systemd[369]: pam_unix(systemd-user:session): session opened for user seth(uid=1000) by (uid=0)
Jul 30 11:31:57 seth-linux audit[369]: USER_START pid=369 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="seth" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:57 seth-linux systemd[369]: pam_env(systemd-user:session): deprecated reading of user environment enabled
Jul 30 11:31:57 seth-linux audit: BPF prog-id=23 op=LOAD
Jul 30 11:31:57 seth-linux audit[369]: SYSCALL arch=c000003e syscall=321 success=yes exit=8 a0=5 a1=7ffc0c614450 a2=78 a3=7ffc0c614450 items=0 ppid=1 pid=369 auid=1000 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=2 comm="systemd" exe="/usr/lib/systemd/systemd" key=(null)
Jul 30 11:31:57 seth-linux audit: PROCTITLE proctitle="(systemd)"
Jul 30 11:31:57 seth-linux audit: BPF prog-id=23 op=UNLOAD
Jul 30 11:31:58 seth-linux systemd[369]: Queued start job for default target Main User Target.
Jul 30 11:31:58 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:31:58 seth-linux audit[357]: USER_START pid=357 uid=0 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="seth" exe="/usr/bin/login" hostname=seth-linux addr=? terminal=/dev/tty1 res=success'
Jul 30 11:31:58 seth-linux audit[357]: CRED_REFR pid=357 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="seth" exe="/usr/bin/login" hostname=seth-linux addr=? terminal=/dev/tty1 res=success'
Jul 30 11:31:58 seth-linux login[357]: pam_env(login:session): deprecated reading of user environment enabled
Jul 30 11:31:58 seth-linux systemd[369]: Created slice User Application Slice.
Jul 30 11:31:58 seth-linux login[357]: LOGIN ON tty1 BY seth
Jul 30 11:31:58 seth-linux systemd[369]: Reached target Paths.
Jul 30 11:31:58 seth-linux systemd[369]: Reached target Timers.
Jul 30 11:31:58 seth-linux systemd[369]: Starting D-Bus User Message Bus Socket...
Jul 30 11:31:58 seth-linux systemd[369]: Listening on GnuPG network certificate management daemon.
Jul 30 11:31:58 seth-linux systemd[369]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
Jul 30 11:31:58 seth-linux systemd[369]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
Jul 30 11:31:58 seth-linux systemd[369]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Jul 30 11:31:58 seth-linux systemd[369]: Listening on GnuPG cryptographic agent and passphrase cache.
Jul 30 11:31:58 seth-linux systemd[369]: Listening on p11-kit server.
Jul 30 11:31:58 seth-linux systemd[369]: Listening on Sound System.
Jul 30 11:31:58 seth-linux systemd[369]: Listening on D-Bus User Message Bus Socket.
Jul 30 11:31:58 seth-linux systemd[369]: Reached target Sockets.
Jul 30 11:31:58 seth-linux systemd[369]: Reached target Basic System.
Jul 30 11:31:58 seth-linux systemd[1]: Started User Manager for UID 1000.
Jul 30 11:31:58 seth-linux systemd[1]: Started Session 1 of User seth.
Jul 30 11:31:58 seth-linux systemd[369]: Starting Update XDG user dir configuration...
Jul 30 11:31:58 seth-linux systemd[369]: Finished Update XDG user dir configuration.
Jul 30 11:31:58 seth-linux systemd[369]: Reached target Main User Target.
Jul 30 11:31:58 seth-linux systemd[369]: Startup finished in 241ms.
Jul 30 11:31:58 seth-linux systemd[1]: systemd-rfkill.service: Deactivated successfully.
Jul 30 11:31:58 seth-linux audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:32:00 seth-linux systemd[369]: Started D-Bus User Message Bus.
Jul 30 11:32:00 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service' requested by ':1.11' (uid=1000 pid=418 comm="lxpolkit ")
Jul 30 11:32:00 seth-linux systemd[1]: Starting Authorization Manager...
Jul 30 11:32:00 seth-linux polkitd[434]: Started polkitd version 0.119
Jul 30 11:32:00 seth-linux polkitd[434]: Loading rules from directory /etc/polkit-1/rules.d
Jul 30 11:32:00 seth-linux polkitd[434]: Loading rules from directory /usr/share/polkit-1/rules.d
Jul 30 11:32:00 seth-linux polkitd[434]: Finished loading, compiling and executing 3 rules
Jul 30 11:32:00 seth-linux dbus-daemon[332]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Jul 30 11:32:00 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:32:00 seth-linux systemd[1]: Started Authorization Manager.
Jul 30 11:32:00 seth-linux polkitd[434]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
Jul 30 11:32:00 seth-linux polkitd[434]: Registered Authentication Agent for unix-session:1 (system bus name :1.11 [lxpolkit], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Jul 30 11:32:00 seth-linux dbus-daemon[432]: [session uid=1000 pid=432] Activating via systemd: service name='org.a11y.Bus' unit='at-spi-dbus-bus.service' requested by ':1.2' (uid=1000 pid=420 comm="nm-applet ")
Jul 30 11:32:00 seth-linux systemd[369]: Starting Accessibility services bus...
Jul 30 11:32:00 seth-linux dbus-daemon[432]: [session uid=1000 pid=432] Successfully activated service 'org.a11y.Bus'
Jul 30 11:32:00 seth-linux systemd[369]: Started Accessibility services bus.
Jul 30 11:32:00 seth-linux dbus-daemon[432]: [session uid=1000 pid=432] Activating via systemd: service name='org.gtk.vfs.Daemon' unit='gvfs-daemon.service' requested by ':1.4' (uid=1000 pid=420 comm="nm-applet ")
Jul 30 11:32:00 seth-linux systemd[369]: Starting Virtual filesystem service...
Jul 30 11:32:01 seth-linux dbus-daemon[432]: [session uid=1000 pid=432] Successfully activated service 'org.gtk.vfs.Daemon'
Jul 30 11:32:01 seth-linux systemd[369]: Started Virtual filesystem service.
Jul 30 11:32:01 seth-linux NetworkManager[333]: <info>  [1627666321.2294] agent-manager: agent[94a4123a98bb4853,:1.13/org.freedesktop.nm-applet/1000]: agent registered
Jul 30 11:32:01 seth-linux at-spi-bus-launcher[452]: dbus-daemon[452]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=1000 pid=420 comm="nm-applet ")
Jul 30 11:32:01 seth-linux at-spi-bus-launcher[452]: dbus-daemon[452]: Successfully activated service 'org.a11y.atspi.Registry'
Jul 30 11:32:01 seth-linux at-spi-bus-launcher[475]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jul 30 11:32:03 seth-linux systemd[1]: NetworkManager-dispatcher.service: Deactivated successfully.
Jul 30 11:32:03 seth-linux audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:32:03 seth-linux kernel: kauditd_printk_skb: 12 callbacks suppressed
Jul 30 11:32:03 seth-linux kernel: audit: type=1131 audit(1627666323.903:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:32:10 seth-linux sudo[517]: pam_unix(sudo:auth): conversation failed
Jul 30 11:32:10 seth-linux sudo[517]: pam_unix(sudo:auth): auth could not identify password for [seth]
Jul 30 11:32:10 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.14' (uid=0 pid=517 comm="sudo pacman -S -y -u --config /etc/pacman.conf -- ")
Jul 30 11:32:10 seth-linux dbus-daemon[332]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
Jul 30 11:32:10 seth-linux sudo[517]: pam_systemd_home(sudo:auth): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
Jul 30 11:32:10 seth-linux audit[517]: USER_AUTH pid=517 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=? acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=failed'
Jul 30 11:32:10 seth-linux kernel: audit: type=1100 audit(1627666330.786:56): pid=517 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=? acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=failed'
Jul 30 11:32:23 seth-linux systemd[1]: systemd-hostnamed.service: Deactivated successfully.
Jul 30 11:32:23 seth-linux audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:32:23 seth-linux kernel: audit: type=1131 audit(1627666343.933:57): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:32:24 seth-linux audit: BPF prog-id=22 op=UNLOAD
Jul 30 11:32:24 seth-linux audit: BPF prog-id=21 op=UNLOAD
Jul 30 11:32:24 seth-linux audit: BPF prog-id=20 op=UNLOAD
Jul 30 11:32:24 seth-linux kernel: audit: type=1334 audit(1627666344.003:58): prog-id=22 op=UNLOAD
Jul 30 11:32:24 seth-linux kernel: audit: type=1334 audit(1627666344.003:59): prog-id=21 op=UNLOAD
Jul 30 11:32:24 seth-linux kernel: audit: type=1334 audit(1627666344.003:60): prog-id=20 op=UNLOAD
Jul 30 11:32:28 seth-linux audit[549]: USER_AUTH pid=549 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:28 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.15' (uid=0 pid=549 comm="sudo pacman -S --config /etc/pacman.conf -- extra/")
Jul 30 11:32:28 seth-linux dbus-daemon[332]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
Jul 30 11:32:28 seth-linux sudo[549]: pam_systemd_home(sudo:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
Jul 30 11:32:28 seth-linux audit[549]: USER_ACCT pid=549 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:28 seth-linux kernel: audit: type=1100 audit(1627666348.536:61): pid=549 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:28 seth-linux kernel: audit: type=1101 audit(1627666348.536:62): pid=549 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:28 seth-linux sudo[549]:     seth : TTY=pts/0 ; PWD=/home/seth ; USER=root ; COMMAND=/usr/bin/pacman -S --config /etc/pacman.conf -- extra/dkms
Jul 30 11:32:28 seth-linux audit[549]: CRED_REFR pid=549 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:28 seth-linux kernel: audit: type=1110 audit(1627666348.540:63): pid=549 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:28 seth-linux sudo[549]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000)
Jul 30 11:32:28 seth-linux audit[549]: USER_START pid=549 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:28 seth-linux kernel: audit: type=1105 audit(1627666348.543:64): pid=549 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:29 seth-linux sudo[549]: pam_unix(sudo:session): session closed for user root
Jul 30 11:32:29 seth-linux audit[549]: USER_END pid=549 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:29 seth-linux audit[549]: CRED_DISP pid=549 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:29 seth-linux kernel: audit: type=1106 audit(1627666349.830:65): pid=549 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:29 seth-linux kernel: audit: type=1104 audit(1627666349.830:66): pid=549 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:29 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.16' (uid=0 pid=577 comm="sudo pacman -D -q --asdeps --config /etc/pacman.co")
Jul 30 11:32:29 seth-linux dbus-daemon[332]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
Jul 30 11:32:29 seth-linux sudo[577]: pam_systemd_home(sudo:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
Jul 30 11:32:29 seth-linux audit[577]: USER_ACCT pid=577 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:29 seth-linux sudo[577]:     seth : TTY=pts/0 ; PWD=/home/seth ; USER=root ; COMMAND=/usr/bin/pacman -D -q --asdeps --config /etc/pacman.conf -- dkms
Jul 30 11:32:29 seth-linux audit[577]: CRED_REFR pid=577 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:29 seth-linux kernel: audit: type=1101 audit(1627666349.846:67): pid=577 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:29 seth-linux kernel: audit: type=1110 audit(1627666349.846:68): pid=577 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:29 seth-linux sudo[577]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000)
Jul 30 11:32:29 seth-linux audit[577]: USER_START pid=577 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:29 seth-linux kernel: audit: type=1105 audit(1627666349.850:69): pid=577 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:29 seth-linux sudo[577]: pam_unix(sudo:session): session closed for user root
Jul 30 11:32:29 seth-linux audit[577]: USER_END pid=577 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:29 seth-linux audit[577]: CRED_DISP pid=577 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:29 seth-linux kernel: audit: type=1106 audit(1627666349.863:70): pid=577 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:29 seth-linux kernel: audit: type=1104 audit(1627666349.863:71): pid=577 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:51 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.17' (uid=0 pid=10476 comm="sudo pacman -U --noconfirm --config /etc/pacman.co")
Jul 30 11:32:51 seth-linux dbus-daemon[332]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
Jul 30 11:32:51 seth-linux sudo[10476]: pam_systemd_home(sudo:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
Jul 30 11:32:51 seth-linux audit[10476]: USER_ACCT pid=10476 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:51 seth-linux sudo[10476]:     seth : TTY=pts/0 ; PWD=/home/seth ; USER=root ; COMMAND=/usr/bin/pacman -U --noconfirm --config /etc/pacman.conf -- /home/seth/.cache/yay/rtl8723de-dkms-git/rtl8723de-dkms-git-7b7fc22-1-x86_64.pkg.tar.zst
Jul 30 11:32:51 seth-linux audit[10476]: CRED_REFR pid=10476 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:51 seth-linux kernel: audit: type=1101 audit(1627666371.403:72): pid=10476 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:51 seth-linux kernel: audit: type=1110 audit(1627666371.403:73): pid=10476 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:51 seth-linux sudo[10476]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000)
Jul 30 11:32:51 seth-linux audit[10476]: USER_START pid=10476 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:32:51 seth-linux kernel: audit: type=1105 audit(1627666371.406:74): pid=10476 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:33:22 seth-linux systemd[369]: Starting Sound Service...
Jul 30 11:33:22 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service' requested by ':1.20' (uid=1000 pid=11571 comm="/usr/bin/pulseaudio --daemonize=no --log-target=jo")
Jul 30 11:33:22 seth-linux systemd[1]: Starting RealtimeKit Scheduling Policy Service...
Jul 30 11:33:22 seth-linux dbus-daemon[332]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Jul 30 11:33:22 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:33:22 seth-linux rtkit-daemon[11573]: Successfully called chroot.
Jul 30 11:33:22 seth-linux systemd[1]: Started RealtimeKit Scheduling Policy Service.
Jul 30 11:33:22 seth-linux rtkit-daemon[11573]: Successfully dropped privileges.
Jul 30 11:33:22 seth-linux kernel: audit: type=1130 audit(1627666402.260:75): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:33:22 seth-linux rtkit-daemon[11573]: Successfully limited resources.
Jul 30 11:33:22 seth-linux rtkit-daemon[11573]: Running.
Jul 30 11:33:22 seth-linux rtkit-daemon[11573]: Watchdog thread running.
Jul 30 11:33:22 seth-linux rtkit-daemon[11573]: Canary thread running.
Jul 30 11:33:22 seth-linux rtkit-daemon[11573]: Successfully made thread 11571 of process 11571 owned by '1000' high priority at nice level -11.
Jul 30 11:33:22 seth-linux rtkit-daemon[11573]: Supervising 1 threads of 1 processes of 1 users.
Jul 30 11:33:23 seth-linux rtkit-daemon[11573]: Supervising 1 threads of 1 processes of 1 users.
Jul 30 11:33:23 seth-linux rtkit-daemon[11573]: Successfully made thread 11589 of process 11571 owned by '1000' RT at priority 5.
Jul 30 11:33:23 seth-linux rtkit-daemon[11573]: Supervising 2 threads of 1 processes of 1 users.
Jul 30 11:33:23 seth-linux rtkit-daemon[11573]: Supervising 2 threads of 1 processes of 1 users.
Jul 30 11:33:23 seth-linux rtkit-daemon[11573]: Successfully made thread 11595 of process 11571 owned by '1000' RT at priority 5.
Jul 30 11:33:23 seth-linux rtkit-daemon[11573]: Supervising 3 threads of 1 processes of 1 users.
Jul 30 11:33:23 seth-linux systemd[369]: Started Sound Service.
Jul 30 11:33:23 seth-linux bluetoothd[330]: Endpoint registered: sender=:1.23 path=/MediaEndpoint/A2DPSink/sbc
Jul 30 11:33:23 seth-linux bluetoothd[330]: Endpoint registered: sender=:1.23 path=/MediaEndpoint/A2DPSource/sbc
Jul 30 11:33:23 seth-linux kernel: Bluetooth: RFCOMM TTY layer initialized
Jul 30 11:33:23 seth-linux kernel: Bluetooth: RFCOMM socket layer initialized
Jul 30 11:33:23 seth-linux kernel: Bluetooth: RFCOMM ver 1.11
Jul 30 11:33:51 seth-linux sudo[10476]: pam_unix(sudo:session): session closed for user root
Jul 30 11:33:51 seth-linux kernel: audit: type=1106 audit(1627666431.350:76): pid=10476 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:33:51 seth-linux kernel: audit: type=1104 audit(1627666431.350:77): pid=10476 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:33:51 seth-linux audit[10476]: USER_END pid=10476 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:33:51 seth-linux audit[10476]: CRED_DISP pid=10476 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 11:47:25 seth-linux systemd[1]: Starting Cleanup of Temporary Directories...
Jul 30 11:47:25 seth-linux systemd[1]: systemd-tmpfiles-clean.service: Deactivated successfully.
Jul 30 11:47:25 seth-linux systemd[1]: Finished Cleanup of Temporary Directories.
Jul 30 11:47:25 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:47:25 seth-linux audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:47:25 seth-linux kernel: audit: type=1130 audit(1627667245.190:78): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:47:25 seth-linux kernel: audit: type=1131 audit(1627667245.190:79): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 11:54:38 seth-linux kernel: perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79800
Jul 30 12:01:47 seth-linux audit[12208]: USER_AUTH pid=12208 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:01:47 seth-linux kernel: audit: type=1100 audit(1627668107.593:80): pid=12208 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:01:47 seth-linux kernel: audit: type=1101 audit(1627668107.596:81): pid=12208 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:01:47 seth-linux kernel: audit: type=1110 audit(1627668107.596:82): pid=12208 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:01:47 seth-linux kernel: audit: type=1105 audit(1627668107.600:83): pid=12208 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:01:47 seth-linux audit[12208]: USER_ACCT pid=12208 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:01:47 seth-linux audit[12208]: CRED_REFR pid=12208 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:01:47 seth-linux audit[12208]: USER_START pid=12208 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:01:47 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.25' (uid=0 pid=12208 comm="sudo pacman -S gedit ")
Jul 30 12:01:47 seth-linux dbus-daemon[332]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
Jul 30 12:01:47 seth-linux sudo[12208]: pam_systemd_home(sudo:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
Jul 30 12:01:47 seth-linux sudo[12208]:     seth : TTY=pts/0 ; PWD=/home/seth ; USER=root ; COMMAND=/usr/bin/pacman -S gedit
Jul 30 12:01:47 seth-linux sudo[12208]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000)
Jul 30 12:01:50 seth-linux dbus-daemon[432]: [session uid=1000 pid=432] Reloaded configuration
Jul 30 12:01:50 seth-linux sudo[12208]: pam_unix(sudo:session): session closed for user root
Jul 30 12:01:50 seth-linux audit[12208]: USER_END pid=12208 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:01:50 seth-linux audit[12208]: CRED_DISP pid=12208 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:01:50 seth-linux kernel: audit: type=1106 audit(1627668110.916:84): pid=12208 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:01:50 seth-linux kernel: audit: type=1104 audit(1627668110.916:85): pid=12208 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:01:53 seth-linux NetworkManager[333]: <info>  [1627668113.0600] dhcp4 (enp0s21f0u6): state changed bound -> extended, address=192.168.23.166
Jul 30 12:01:53 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.3' (uid=0 pid=333 comm="/usr/bin/NetworkManager --no-daemon ")
Jul 30 12:01:53 seth-linux systemd[1]: Starting Network Manager Script Dispatcher Service...
Jul 30 12:01:53 seth-linux dbus-daemon[332]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jul 30 12:01:53 seth-linux systemd[1]: Started Network Manager Script Dispatcher Service.
Jul 30 12:01:53 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 12:01:53 seth-linux kernel: audit: type=1130 audit(1627668113.070:86): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 12:01:56 seth-linux dbus-daemon[432]: [session uid=1000 pid=432] Activating via systemd: service name='ca.desrt.dconf' unit='dconf.service' requested by ':1.27' (uid=1000 pid=12297 comm="gedit /var/lib/dkms/rtl8723de-5.1.1.8_21285.201710")
Jul 30 12:01:56 seth-linux systemd[369]: Starting User preferences database...
Jul 30 12:01:56 seth-linux dbus-daemon[432]: [session uid=1000 pid=432] Successfully activated service 'ca.desrt.dconf'
Jul 30 12:01:56 seth-linux systemd[369]: Started User preferences database.
Jul 30 12:01:56 seth-linux dbus-daemon[432]: [session uid=1000 pid=432] Activating via systemd: service name='org.gtk.vfs.UDisks2VolumeMonitor' unit='gvfs-udisks2-volume-monitor.service' requested by ':1.27' (uid=1000 pid=12297 comm="gedit /var/lib/dkms/rtl8723de-5.1.1.8_21285.201710")
Jul 30 12:01:56 seth-linux systemd[369]: Starting Virtual filesystem service - disk device monitor...
Jul 30 12:01:56 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service' requested by ':1.27' (uid=1000 pid=12308 comm="/usr/lib/gvfs-udisks2-volume-monitor ")
Jul 30 12:01:56 seth-linux systemd[1]: Starting Disk Manager...
Jul 30 12:01:56 seth-linux udisksd[12311]: udisks daemon version 2.9.2 starting
Jul 30 12:01:56 seth-linux dbus-daemon[332]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Jul 30 12:01:56 seth-linux kernel: audit: type=1130 audit(1627668116.880:87): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 12:01:56 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 12:01:56 seth-linux systemd[1]: Started Disk Manager.
Jul 30 12:01:56 seth-linux udisksd[12311]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Jul 30 12:01:56 seth-linux dbus-daemon[432]: [session uid=1000 pid=432] Successfully activated service 'org.gtk.vfs.UDisks2VolumeMonitor'
Jul 30 12:01:56 seth-linux systemd[369]: Started Virtual filesystem service - disk device monitor.
Jul 30 12:01:56 seth-linux dbus-daemon[432]: [session uid=1000 pid=432] Activating via systemd: service name='org.gtk.vfs.MTPVolumeMonitor' unit='gvfs-mtp-volume-monitor.service' requested by ':1.27' (uid=1000 pid=12297 comm="gedit /var/lib/dkms/rtl8723de-5.1.1.8_21285.201710")
Jul 30 12:01:56 seth-linux systemd[369]: Starting Virtual filesystem service - Media Transfer Protocol monitor...
Jul 30 12:01:56 seth-linux dbus-daemon[432]: [session uid=1000 pid=432] Successfully activated service 'org.gtk.vfs.MTPVolumeMonitor'
Jul 30 12:01:56 seth-linux systemd[369]: Started Virtual filesystem service - Media Transfer Protocol monitor.
Jul 30 12:02:02 seth-linux systemd[1]: NetworkManager-dispatcher.service: Deactivated successfully.
Jul 30 12:02:02 seth-linux audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 12:02:02 seth-linux kernel: audit: type=1131 audit(1627668122.866:88): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 12:03:30 seth-linux kernel: perf: interrupt took too long (3244 > 3127), lowering kernel.perf_event_max_sample_rate to 61500
Jul 30 12:17:59 seth-linux kernel: perf: interrupt took too long (4056 > 4055), lowering kernel.perf_event_max_sample_rate to 49200
Jul 30 12:31:52 seth-linux NetworkManager[333]: <info>  [1627669912.0462] dhcp4 (enp0s21f0u6): state changed extended -> extended, address=192.168.23.166
Jul 30 12:31:52 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.3' (uid=0 pid=333 comm="/usr/bin/NetworkManager --no-daemon ")
Jul 30 12:31:52 seth-linux systemd[1]: Starting Network Manager Script Dispatcher Service...
Jul 30 12:31:52 seth-linux dbus-daemon[332]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jul 30 12:31:52 seth-linux audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 12:31:52 seth-linux systemd[1]: Started Network Manager Script Dispatcher Service.
Jul 30 12:31:52 seth-linux kernel: audit: type=1130 audit(1627669912.056:89): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 12:32:01 seth-linux systemd[1]: NetworkManager-dispatcher.service: Deactivated successfully.
Jul 30 12:32:01 seth-linux audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 12:32:01 seth-linux kernel: audit: type=1131 audit(1627669921.863:90): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Jul 30 12:34:23 seth-linux systemd[369]: Started GnuPG network certificate management daemon.
Jul 30 12:34:23 seth-linux dirmngr[13235]: permanently loaded certificates: 128
Jul 30 12:34:23 seth-linux dirmngr[13235]:     runtime cached certificates: 0
Jul 30 12:34:23 seth-linux dirmngr[13235]:            trusted certificates: 128 (128,0,0,0)
Jul 30 12:34:23 seth-linux dirmngr[13235]: failed to open cache dir file '/home/seth/.gnupg/crls.d/DIR.txt': No such file or directory
Jul 30 12:34:23 seth-linux dirmngr[13235]: creating directory '/home/seth/.gnupg/crls.d'
Jul 30 12:34:23 seth-linux dirmngr[13235]: new cache dir file '/home/seth/.gnupg/crls.d/DIR.txt' created
Jul 30 12:34:24 seth-linux dirmngr[13235]: resolve_dns_addr for 'keyserver.ubuntu.com': '162.213.33.9'
Jul 30 12:34:24 seth-linux dirmngr[13235]: resolve_dns_addr for 'keyserver.ubuntu.com': '162.213.33.8'
Jul 30 12:34:24 seth-linux dirmngr[13235]: number of system provided CAs: 143
Jul 30 12:34:50 seth-linux systemd[369]: Started GnuPG cryptographic agent and passphrase cache.
Jul 30 12:34:50 seth-linux gpg-agent[13240]: gpg-agent[13240]: directory '/home/seth/.gnupg/private-keys-v1.d' created
Jul 30 12:34:50 seth-linux gpg-agent[13240]: gpg-agent (GnuPG) 2.2.29 starting in supervised mode.
Jul 30 12:34:50 seth-linux gpg-agent[13240]: using fd 3 for ssh socket (/run/user/1000/gnupg/S.gpg-agent.ssh)
Jul 30 12:34:50 seth-linux gpg-agent[13240]: using fd 4 for extra socket (/run/user/1000/gnupg/S.gpg-agent.extra)
Jul 30 12:34:50 seth-linux gpg-agent[13240]: using fd 5 for browser socket (/run/user/1000/gnupg/S.gpg-agent.browser)
Jul 30 12:34:50 seth-linux gpg-agent[13240]: using fd 6 for std socket (/run/user/1000/gnupg/S.gpg-agent)
Jul 30 12:34:50 seth-linux gpg-agent[13240]: listening on: std=6 extra=4 browser=5 ssh=3
Jul 30 12:34:57 seth-linux audit[13243]: USER_AUTH pid=13243 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:34:57 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.30' (uid=0 pid=13243 comm="sudo pacman -S --config /etc/pacman.conf -- extra/")
Jul 30 12:34:57 seth-linux dbus-daemon[332]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
Jul 30 12:34:57 seth-linux sudo[13243]: pam_systemd_home(sudo:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
Jul 30 12:34:57 seth-linux audit[13243]: USER_ACCT pid=13243 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:34:57 seth-linux kernel: audit: type=1100 audit(1627670097.430:91): pid=13243 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:34:57 seth-linux kernel: audit: type=1101 audit(1627670097.430:92): pid=13243 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:34:57 seth-linux sudo[13243]:     seth : TTY=pts/0 ; PWD=/home/seth ; USER=root ; COMMAND=/usr/bin/pacman -S --config /etc/pacman.conf -- extra/bc extra/cpio extra/libxslt extra/xmlto community/python-pytz community/python-babel community/python-docutils community/python-imagesize extra/python-appdirs community/python-more-itertools extra/python-ordered-set extra/python-pyparsing extra/python-six extra/python-packaging extra/python-setuptools extra/python-markupsafe community/python-jinja community/python-pygments extra/python-urllib3 extra/python-chardet extra/python-idna extra/python-requests community/python-snowballstemmer community/python-sphinx-alabaster-theme community/python-sphinxcontrib-applehelp community/python-sphinxcontrib-devhelp community/python-sphinxcontrib-htmlhelp community/python-sphinxcontrib-jsmath community/python-sphinxcontrib-qthelp community/python-sphinxcontrib-serializinghtml community/python-sphinx community/python-sphinx_rtd_theme extra/giflib
Jul 30 12:34:57 seth-linux sudo[13243]:     seth : (command continued) extra/libwebp extra/aom extra/dav1d extra/rav1e extra/svt-av1 community/libyuv community/libavif extra/libde265 extra/x265 extra/libheif extra/gd extra/jbig2dec core/run-parts extra/libpaper extra/ijs extra/openjpeg2 extra/libidn extra/ghostscript extra/netpbm extra/gts extra/gsfonts extra/graphviz
Jul 30 12:34:57 seth-linux audit[13243]: CRED_REFR pid=13243 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:34:57 seth-linux kernel: audit: type=1110 audit(1627670097.433:93): pid=13243 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:34:57 seth-linux sudo[13243]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000)
Jul 30 12:34:57 seth-linux audit[13243]: USER_START pid=13243 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:34:57 seth-linux kernel: audit: type=1105 audit(1627670097.436:94): pid=13243 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:35:15 seth-linux sudo[13243]: pam_unix(sudo:session): session closed for user root
Jul 30 12:35:15 seth-linux audit[13243]: USER_END pid=13243 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:35:15 seth-linux audit[13243]: CRED_DISP pid=13243 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:35:15 seth-linux kernel: audit: type=1106 audit(1627670115.000:95): pid=13243 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:35:15 seth-linux kernel: audit: type=1104 audit(1627670115.000:96): pid=13243 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:35:15 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.31' (uid=0 pid=13268 comm="sudo pacman -R -u --noconfirm --config /etc/pacman")
Jul 30 12:35:15 seth-linux dbus-daemon[332]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
Jul 30 12:35:15 seth-linux sudo[13268]: pam_systemd_home(sudo:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
Jul 30 12:35:15 seth-linux audit[13268]: USER_ACCT pid=13268 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:35:15 seth-linux kernel: audit: type=1101 audit(1627670115.016:97): pid=13268 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:35:15 seth-linux sudo[13268]:     seth : TTY=pts/0 ; PWD=/home/seth ; USER=root ; COMMAND=/usr/bin/pacman -R -u --noconfirm --config /etc/pacman.conf -- bc cpio libxslt xmlto python-pytz python-babel python-docutils python-imagesize python-appdirs python-more-itertools python-ordered-set python-pyparsing python-six python-packaging python-setuptools python-markupsafe python-jinja python-pygments python-urllib3 python-chardet python-idna python-requests python-snowballstemmer python-sphinx-alabaster-theme python-sphinxcontrib-applehelp python-sphinxcontrib-devhelp python-sphinxcontrib-htmlhelp python-sphinxcontrib-jsmath python-sphinxcontrib-qthelp python-sphinxcontrib-serializinghtml python-sphinx python-sphinx_rtd_theme giflib libwebp aom dav1d rav1e svt-av1 libyuv libavif libde265 x265 libheif gd jbig2dec run-parts libpaper ijs openjpeg2 libidn ghostscript netpbm gts gsfonts graphviz
Jul 30 12:35:15 seth-linux audit[13268]: CRED_REFR pid=13268 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:35:15 seth-linux kernel: audit: type=1110 audit(1627670115.020:98): pid=13268 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:35:15 seth-linux sudo[13268]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000)
Jul 30 12:35:15 seth-linux audit[13268]: USER_START pid=13268 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:35:15 seth-linux kernel: audit: type=1105 audit(1627670115.023:99): pid=13268 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:35:15 seth-linux sudo[13268]: pam_unix(sudo:session): session closed for user root
Jul 30 12:35:15 seth-linux audit[13268]: USER_END pid=13268 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:35:15 seth-linux audit[13268]: CRED_DISP pid=13268 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:35:15 seth-linux kernel: audit: type=1106 audit(1627670115.056:100): pid=13268 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:35:15 seth-linux kernel: audit: type=1104 audit(1627670115.056:101): pid=13268 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:36:34 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.32' (uid=0 pid=13294 comm="sudo pacman -S -y -y --config /etc/pacman.conf -- ")
Jul 30 12:36:34 seth-linux dbus-daemon[332]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
Jul 30 12:36:34 seth-linux sudo[13294]: pam_systemd_home(sudo:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
Jul 30 12:36:34 seth-linux audit[13294]: USER_ACCT pid=13294 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:36:34 seth-linux kernel: audit: type=1101 audit(1627670194.443:102): pid=13294 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:36:34 seth-linux sudo[13294]:     seth : TTY=pts/0 ; PWD=/home/seth ; USER=root ; COMMAND=/usr/bin/pacman -S -y -y --config /etc/pacman.conf --
Jul 30 12:36:34 seth-linux audit[13294]: CRED_REFR pid=13294 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:36:34 seth-linux kernel: audit: type=1110 audit(1627670194.446:103): pid=13294 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:36:34 seth-linux audit[13294]: USER_START pid=13294 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:36:34 seth-linux sudo[13294]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000)
Jul 30 12:36:34 seth-linux kernel: audit: type=1105 audit(1627670194.450:104): pid=13294 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:36:39 seth-linux sudo[13294]: pam_unix(sudo:session): session closed for user root
Jul 30 12:36:39 seth-linux audit[13294]: USER_END pid=13294 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:36:39 seth-linux audit[13294]: CRED_DISP pid=13294 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:36:39 seth-linux kernel: audit: type=1106 audit(1627670199.060:105): pid=13294 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:36:39 seth-linux kernel: audit: type=1104 audit(1627670199.060:106): pid=13294 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:36:47 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.33' (uid=0 pid=13302 comm="sudo pacman -S -y -y --config /etc/pacman.conf -- ")
Jul 30 12:36:47 seth-linux dbus-daemon[332]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
Jul 30 12:36:47 seth-linux sudo[13302]: pam_systemd_home(sudo:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
Jul 30 12:36:47 seth-linux audit[13302]: USER_ACCT pid=13302 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:36:47 seth-linux sudo[13302]:     seth : TTY=pts/0 ; PWD=/home/seth ; USER=root ; COMMAND=/usr/bin/pacman -S -y -y --config /etc/pacman.conf -- extra/bc extra/cpio extra/libxslt extra/xmlto community/python-pytz community/python-babel community/python-docutils community/python-imagesize extra/python-appdirs community/python-more-itertools extra/python-ordered-set extra/python-pyparsing extra/python-six extra/python-packaging extra/python-setuptools extra/python-markupsafe community/python-jinja community/python-pygments extra/python-urllib3 extra/python-chardet extra/python-idna extra/python-requests community/python-snowballstemmer community/python-sphinx-alabaster-theme community/python-sphinxcontrib-applehelp community/python-sphinxcontrib-devhelp community/python-sphinxcontrib-htmlhelp community/python-sphinxcontrib-jsmath community/python-sphinxcontrib-qthelp community/python-sphinxcontrib-serializinghtml community/python-sphinx community/python-sphinx_rtd_theme
Jul 30 12:36:47 seth-linux sudo[13302]:     seth : (command continued) extra/giflib extra/libwebp extra/aom extra/dav1d extra/rav1e extra/svt-av1 community/libyuv community/libavif extra/libde265 extra/x265 extra/libheif extra/gd extra/jbig2dec core/run-parts extra/libpaper extra/ijs extra/openjpeg2 extra/libidn extra/ghostscript extra/netpbm extra/gts extra/gsfonts extra/graphviz
Jul 30 12:36:47 seth-linux audit[13302]: CRED_REFR pid=13302 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:36:47 seth-linux kernel: audit: type=1101 audit(1627670207.400:107): pid=13302 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:36:47 seth-linux kernel: audit: type=1110 audit(1627670207.400:108): pid=13302 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:36:47 seth-linux sudo[13302]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000)
Jul 30 12:36:47 seth-linux audit[13302]: USER_START pid=13302 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:36:47 seth-linux kernel: audit: type=1105 audit(1627670207.406:109): pid=13302 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:37:05 seth-linux sudo[13302]: pam_unix(sudo:session): session closed for user root
Jul 30 12:37:05 seth-linux kernel: audit: type=1106 audit(1627670225.856:110): pid=13302 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:37:05 seth-linux kernel: audit: type=1104 audit(1627670225.856:111): pid=13302 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:37:05 seth-linux audit[13302]: USER_END pid=13302 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:37:05 seth-linux audit[13302]: CRED_DISP pid=13302 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:37:05 seth-linux dbus-daemon[332]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.34' (uid=0 pid=13776 comm="sudo pacman -D -q --asdeps --config /etc/pacman.co")
Jul 30 12:37:05 seth-linux dbus-daemon[332]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
Jul 30 12:37:05 seth-linux sudo[13776]: pam_systemd_home(sudo:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
Jul 30 12:37:05 seth-linux kernel: audit: type=1101 audit(1627670225.876:112): pid=13776 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:37:05 seth-linux audit[13776]: USER_ACCT pid=13776 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="seth" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:37:05 seth-linux sudo[13776]:     seth : TTY=pts/0 ; PWD=/home/seth ; USER=root ; COMMAND=/usr/bin/pacman -D -q --asdeps --config /etc/pacman.conf -- bc cpio libxslt xmlto python-pytz python-babel python-docutils python-imagesize python-appdirs python-more-itertools python-ordered-set python-pyparsing python-six python-packaging python-setuptools python-markupsafe python-jinja python-pygments python-urllib3 python-chardet python-idna python-requests python-snowballstemmer python-sphinx-alabaster-theme python-sphinxcontrib-applehelp python-sphinxcontrib-devhelp python-sphinxcontrib-htmlhelp python-sphinxcontrib-jsmath python-sphinxcontrib-qthelp python-sphinxcontrib-serializinghtml python-sphinx python-sphinx_rtd_theme giflib libwebp aom dav1d rav1e svt-av1 libyuv libavif libde265 x265 libheif gd jbig2dec run-parts libpaper ijs openjpeg2 libidn ghostscript netpbm gts gsfonts graphviz
Jul 30 12:37:05 seth-linux audit[13776]: CRED_REFR pid=13776 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:37:05 seth-linux kernel: audit: type=1110 audit(1627670225.880:113): pid=13776 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:37:05 seth-linux audit[13776]: USER_START pid=13776 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:37:05 seth-linux kernel: audit: type=1105 audit(1627670225.883:114): pid=13776 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:37:05 seth-linux sudo[13776]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000)
Jul 30 12:37:05 seth-linux sudo[13776]: pam_unix(sudo:session): session closed for user root
Jul 30 12:37:05 seth-linux audit[13776]: USER_END pid=13776 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:37:05 seth-linux audit[13776]: CRED_DISP pid=13776 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:37:05 seth-linux kernel: audit: type=1106 audit(1627670225.903:115): pid=13776 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Jul 30 12:37:05 seth-linux kernel: audit: type=1104 audit(1627670225.903:116): pid=13776 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'

Last edited by sethsource (2021-07-31 01:40:16)

Zod · 2021-07-31 01:48:30

This is the best match driver I've found..

https://aur.archlinux.org/packages/rtw88-dkms-git/

Last edited by Zod (2021-07-31 01:55:00)

sethsource · 2021-07-31 01:54:14

Zod wrote:

This is the best match driver I've found..
https://aur.archlinux.org/packages/rtw88-dkms-git/
I don't know if it will build for you, you should read the comments for the package.

Alright i'll try this driver... I'll have to wait for this kernel to build, could take all day maybe.. We will see

Zod · 2021-07-31 02:05:02

Honestly, if it were me...

I would try to build and install rtw88-dkms-git first.

I've not seen anything conclusive that RTL8723DU is in mainline...just alot of requests.

sethsource · 2021-07-31 02:14:26

Zod wrote:

Honestly, if it were me...
I would try to build and install rtw88-dkms-git first.
I've not seen anything conclusive that RTL8723DU is in mainline...just alot of requests.

Alright installed that, rebooted, then checked ip link and nothing...

then i ran

rmmod bcma b43 wl

then i ran

sudo modprobe wl

and then checked ip link again and still nothing.

sethsource · 2021-07-31 02:33:26

Zod wrote:

Honestly, if it were me...
I would try to build and install rtw88-dkms-git first.
I've not seen anything conclusive that RTL8723DU is in mainline...just alot of requests.

I guess I could check mainline... maybe mainline would fix my audio problem too...

Zod · 2021-07-31 02:46:09

https://github.com/lwfinger/rtl8723du

Just something to keep in mind.

sethsource · 2021-07-31 02:49:17

Zod wrote:

https://github.com/lwfinger/rtl8723du
Just something to keep in mind.

I saw that but lwfinger privated the project! he must have opened it recently!

sethsource · 2021-07-31 03:21:51

Zod wrote:

https://github.com/lwfinger/rtl8723du
Just something to keep in mind.

Okay I tried to build this... and

seth@seth-linux: ~/Downloads/rtl8723du-master $ ls
core/  dkms.conf  hal/  include/  Makefile  os_dep/  platform/  README.md
seth@seth-linux: ~/Downloads/rtl8723du-master $ cd ..
seth@seth-linux: ~/Downloads $ ls
rtl8723du-master/  rtl8723du-master.zip
seth@seth-linux: ~/Downloads $ sudo mv rtl8723du-master /usr/src/rtl8723du-0.1
seth@seth-linux: ~/Downloads $ sudo dkms add -m rtl8723du -v 0.1

Creating symlink /var/lib/dkms/rtl8723du/0.1/source ->
                 /usr/src/rtl8723du-0.1

DKMS: add completed.
seth@seth-linux: ~/Downloads $ sudo dkms build -m rtl8723du -v 0.1

Kernel preparation unnecessary for this kernel.  Skipping...

Building module:
cleaning build area...(bad exit status: 2)
make -j2 KERNELRELEASE=5.13.4-arch2-1 -C /usr/lib/modules/5.13.4-arch2-1/build M=/var/lib/dkms/rtl8723du/0.1/build...(bad exit status: 2)
Error! Bad return status for module build on kernel: 5.13.4-arch2-1 (x86_64)
Consult /var/lib/dkms/rtl8723du/0.1/build/make.log for more information.
seth@seth-linux: ~/Downloads $ sudo dkms build rtl8723du/0.1

Kernel preparation unnecessary for this kernel.  Skipping...

Building module:
cleaning build area...(bad exit status: 2)
make -j2 KERNELRELEASE=5.13.4-arch2-1 -C /usr/lib/modules/5.13.4-arch2-1/build M=/var/lib/dkms/rtl8723du/0.1/build...(bad exit status: 2)
Error! Bad return status for module build on kernel: 5.13.4-arch2-1 (x86_64)
Consult /var/lib/dkms/rtl8723du/0.1/build/make.log for more information.
seth@seth-linux: ~/Downloads $

Arch Linux

#1 2021-07-31 00:21:42

Laptop RTL8723DU Wifi card Not working

#2 2021-07-31 00:27:04

Re: Laptop RTL8723DU Wifi card Not working

#3 2021-07-31 00:34:46

Re: Laptop RTL8723DU Wifi card Not working

#4 2021-07-31 00:53:09

Re: Laptop RTL8723DU Wifi card Not working

#5 2021-07-31 01:02:53

Re: Laptop RTL8723DU Wifi card Not working

#6 2021-07-31 01:20:48

Re: Laptop RTL8723DU Wifi card Not working

#7 2021-07-31 01:28:53

Re: Laptop RTL8723DU Wifi card Not working

#8 2021-07-31 01:34:54

Re: Laptop RTL8723DU Wifi card Not working

#9 2021-07-31 01:39:00

Re: Laptop RTL8723DU Wifi card Not working

#10 2021-07-31 01:48:30

Re: Laptop RTL8723DU Wifi card Not working

#11 2021-07-31 01:54:14

Re: Laptop RTL8723DU Wifi card Not working

#12 2021-07-31 02:05:02

Re: Laptop RTL8723DU Wifi card Not working

#13 2021-07-31 02:14:26

Re: Laptop RTL8723DU Wifi card Not working

#14 2021-07-31 02:33:26

Re: Laptop RTL8723DU Wifi card Not working

#15 2021-07-31 02:46:09

Re: Laptop RTL8723DU Wifi card Not working

#16 2021-07-31 02:49:17

Re: Laptop RTL8723DU Wifi card Not working

#17 2021-07-31 03:21:51

Re: Laptop RTL8723DU Wifi card Not working

Board footer