You are not logged in.

#1 2021-08-10 13:12:22

skraw
Member
Registered: 2021-08-10
Posts: 3

Audio not working on Chuwi Gemibook (Intel SST)

Hello,

since few days I try to get the audio output and input working, but no success so far. I tried some options to like

options snd-intel-dspcfg dsp_driver=3
#options snd-hda-intel model=auto
options snd-hda-intel dsp_driver=3
#options snd-hda-intel dsp_driver=1

With the currently set dsp_driver=3 I see

# dmesg | grep -i audio
[    0.185878] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    3.236554] sof-audio-pci-intel-apl 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if 0x040100
[    4.684539] sof-audio-pci-intel-apl 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.767795] sof-audio-pci-intel-apl 0000:00:0e.0: use msi interrupt mode
[    4.783997] sof-audio-pci-intel-apl 0000:00:0e.0: hda codecs found, mask 4
[    4.784005] sof-audio-pci-intel-apl 0000:00:0e.0: using HDA machine driver skl_hda_dsp_generic now
[    4.784014] sof-audio-pci-intel-apl 0000:00:0e.0: DMICs detected in NHLT tables: 0
[    4.786436] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware info: version 1:8:0-9e7a8
[    4.786443] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware: ABI 3:18:1 Kernel ABI 3:18:0
[    4.786462] sof-audio-pci-intel-apl 0000:00:0e.0: unknown sof_ext_man header type 3 size 0x30
[    4.836760] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware info: version 1:8:0-9e7a8
[    4.836768] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware: ABI 3:18:1 Kernel ABI 3:18:0
[    4.846187] sof-audio-pci-intel-apl 0000:00:0e.0: Topology: ABI 3:18:1 Kernel ABI 3:18:0
[    4.848435] sof-audio-pci-intel-apl 0000:00:0e.0: ASoC: Parent card not yet available, widget card binding deferred

And this

# aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: sofhdadsp [sof-hda-dsp], Gerät 1: HDMI1 (*) []
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: sofhdadsp [sof-hda-dsp], Gerät 2: HDMI2 (*) []
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: sofhdadsp [sof-hda-dsp], Gerät 3: HDMI3 (*) []
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0

Nevertheless, no output, only pulseaudio dummy, and no mic.

Any hints?

PS: needless to mention that the pre-installed win10 works flawlessly regarding audio.

--
Regards

Last edited by skraw (2021-08-10 13:31:28)

Offline

Board footer

Powered by FluxBB