You are not logged in.

Pages: 1

#1 2021-12-02 09:26:25

Goxore
Member
Registered: 2021-12-02
Posts: 5

Build-in audio not working on arch (was working on windows)

Bought myself an intel laptop, after arch installation built-in audio stopped working. Headphones work fine.
Also i'm not sure how to put console output in a box, so i've just pased it here

> $ lspci
00:00.0 Host bridge: Intel Corporation Gemini Lake Host Bridge (rev 06)
00:00.1 Signal processing controller: Intel Corporation Celeron/Pentium Silver Processor Dynamic Platform and Thermal Framework Processor Participant (rev 06)
00:02.0 VGA compatible controller: Intel Corporation GeminiLake [UHD Graphics 600] (rev 06)
00:0c.0 Network controller: Intel Corporation Gemini Lake PCH CNVi WiFi (rev 06)
00:0e.0 Multimedia audio controller: Intel Corporation Celeron/Pentium Silver Processor High Definition Audio (rev 06)
00:0f.0 Communication controller: Intel Corporation Celeron/Pentium Silver Processor Trusted Execution Engine Interface (rev 06)
00:12.0 SATA controller: Intel Corporation Celeron/Pentium Silver Processor SATA Controller (rev 06)
00:14.0 PCI bridge: Intel Corporation Gemini Lake PCI Express Root Port (rev f6)
00:15.0 USB controller: Intel Corporation Celeron/Pentium Silver Processor USB 3.0 xHCI Controller (rev 06)
00:16.0 Signal processing controller: Intel Corporation Celeron/Pentium Silver Processor Serial IO I2C Host Controller (rev 06)
00:16.1 Signal processing controller: Intel Corporation Celeron/Pentium Silver Processor Serial IO I2C Host Controller (rev 06)
00:16.2 Signal processing controller: Intel Corporation Device 31b0 (rev 06)
00:16.3 Signal processing controller: Intel Corporation Device 31b2 (rev 06)
00:17.0 Signal processing controller: Intel Corporation Device 31b4 (rev 06)
00:17.1 Signal processing controller: Intel Corporation Device 31b6 (rev 06)
00:17.2 Signal processing controller: Intel Corporation Device 31b8 (rev 06)
00:17.3 Signal processing controller: Intel Corporation Device 31ba (rev 06)
00:18.0 Signal processing controller: Intel Corporation Celeron/Pentium Silver Processor Serial IO UART Host Controller (rev 06)
00:18.1 Signal processing controller: Intel Corporation Celeron/Pentium Silver Processor Serial IO UART Host Controller (rev 06)
00:18.2 Signal processing controller: Intel Corporation Celeron/Pentium Silver Processor Serial IO UART Host Controller (rev 06)
00:18.3 Signal processing controller: Intel Corporation Celeron/Pentium Silver Processor Serial IO UART Host Controller (rev 06)
00:19.0 Signal processing controller: Intel Corporation Celeron/Pentium Silver Processor Serial IO SPI Host Controller (rev 06)
00:19.1 Signal processing controller: Intel Corporation Celeron/Pentium Silver Processor Serial IO SPI Host Controller (rev 06)
00:19.2 Signal processing controller: Intel Corporation Celeron/Pentium Silver Processor Serial IO SPI Host Controller (rev 06)
00:1c.0 SD Host controller: Intel Corporation Celeron/Pentium Silver Processor SDA Standard Compliant SD Host Controller (rev 06)
00:1e.0 SD Host controller: Intel Corporation Device 31d0 (rev 06)
00:1f.0 ISA bridge: Intel Corporation Celeron/Pentium Silver Processor LPC Controller (rev 06)
00:1f.1 SMBus: Intel Corporation Celeron/Pentium Silver Processor Gaussian Mixture Model (rev 06)

yurii@yurii-laptop ~             [11:23:56]

Offline

#2 2021-12-02 11:15:47

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,547

Re: Build-in audio not working on arch (was working on windows)

See the bbcode link under every post box for how to do code tags. In any case this doesn't contain much of use, what's your 

aplay -l
sudo dmesg | grep -iE 'snd|sof'
#If pulse/pipewire installed
pactl list cards
pactl list sinks

And make sure windows fast boot is disabled.

Last edited by V1del (2021-12-02 11:16:47)

Offline

#3 2021-12-02 12:05:02

Goxore
Member
Registered: 2021-12-02
Posts: 5

Re: Build-in audio not working on arch (was working on windows)

aplay -l

yurii-laptop :: ~ » aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sofhdadsp [sof-hda-dsp], device 1: HDMI1 (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: sofhdadsp [sof-hda-dsp], device 2: HDMI2 (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: sofhdadsp [sof-hda-dsp], device 3: HDMI3 (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

sudo dmesg | -iE 'snd|sof'

yurii-laptop :: ~ » sudo dmesg | grep -iE 'snd|sof'

[sudo] password for yurii:
[    0.862978] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.939913] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.939916] software IO TLB: mapped [mem 0x000000006cd2a000-0x0000000070d2a000] (64MB)
[    4.814645] snd_hda_intel 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if info 0x040100
[    6.440575] snd_soc_skl 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if info 0x040100
[    6.992777] sof-audio-pci-intel-apl 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if info 0x040100
[    6.993042] sof-audio-pci-intel-apl 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if 0x040100
[    6.993196] sof-audio-pci-intel-apl 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    7.020032] sof-audio-pci-intel-apl 0000:00:0e.0: use msi interrupt mode
[    7.066667] sof-audio-pci-intel-apl 0000:00:0e.0: hda codecs found, mask 4
[    7.066677] sof-audio-pci-intel-apl 0000:00:0e.0: using HDA machine driver skl_hda_dsp_generic now
[    7.066686] sof-audio-pci-intel-apl 0000:00:0e.0: DMICs detected in NHLT tables: 0
[    7.070280] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware info: version 1:9:2-e096c
[    7.070287] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware: ABI 3:20:0 Kernel ABI 3:18:0
[    7.070290] sof-audio-pci-intel-apl 0000:00:0e.0: warn: FW ABI is more recent than kernel
[    7.070301] sof-audio-pci-intel-apl 0000:00:0e.0: unknown sof_ext_man header type 3 size 0x30
[    7.120196] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware info: version 1:9:2-e096c
[    7.120207] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware: ABI 3:20:0 Kernel ABI 3:18:0
[    7.120210] sof-audio-pci-intel-apl 0000:00:0e.0: warn: FW ABI is more recent than kernel
[    7.366222] sof-audio-pci-intel-apl 0000:00:0e.0: Topology: ABI 3:20:0 Kernel ABI 3:18:0
[    7.366233] sof-audio-pci-intel-apl 0000:00:0e.0: warn: topology ABI is more recent than kernel
[    7.369967] sof-audio-pci-intel-apl 0000:00:0e.0: ASoC: Parent card not yet available, widget card binding deferred
[    7.487079] input: sof-hda-dsp HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:0e.0/skl_hda_dsp_generic/sound/card0/input10
[    7.487326] input: sof-hda-dsp HDMI/DP,pcm=2 as /devices/pci0000:00/0000:00:0e.0/skl_hda_dsp_generic/sound/card0/input11
[    7.487554] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/skl_hda_dsp_generic/sound/card0/input12

pactl list cards doesn't give me anything

pactl list sinks

Sink #0
	State: SUSPENDED
	Name: auto_null
	Description: Dummy Output
	Driver: module-null-sink.c
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 15
	Mute: no
	Volume: front-left: 65528 / 100% / -0,00 dB,   front-right: 65528 / 100% / -0,00 dB
	        balance 0,00
	Base Volume: 65536 / 100% / 0,00 dB
	Monitor Source: auto_null.monitor
	Latency: 0 usec, configured 0 usec
	Flags: DECIBEL_VOLUME LATENCY SET_FORMATS
	Properties:
		device.description = "Dummy Output"
		device.class = "abstract"
		device.icon_name = "audio-card"
	Formats:
		pcm

Offline

Pages: 1

Board footer

Powered by FluxBB