[SOLVED] Usb microphone is not working

JuanDeag · 2022-01-03 15:48:13

I just bought a new usb microphone on Amazon. It works fine on my Windows laptop, But when I plug it in my desktop computer with archlinux it does not work. Pulseaudio detects the microphone, but there's no audio coming from my microphone. When I test my old 3.5 mm jack microphone it works perfectly fine. I've also followed the archwiki: https://wiki.archlinux.org/title/PulseAudio but still no success. I also edited "/etc/pulse/default.pa", but still does not work. And when i try to use the command alsamixer and change the volume to max on my microphone there is still no audio. Is there anything I can do or should I wait for a kernel update?

Last edited by JuanDeag (2022-01-03 19:19:10)

Head_on_a_Stick · 2022-01-03 15:57:09

Did you check dmesg to see what the kernel says after you plug in the device? Perhaps there are some searchable error messages that would provide some clues.

JuanDeag · 2022-01-03 16:05:32

 the output dmesg gave me: [    0.010894]   Normal   [mem 0x0000000100000000-0x000000041effffff]
[    0.010895]   Device   empty
[    0.010896] Movable zone start for each node
[    0.010897] Early memory node ranges
[    0.010898]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.010899]   node   0: [mem 0x0000000000100000-0x00000000de315fff]
[    0.010900]   node   0: [mem 0x00000000deeb5000-0x00000000deeb5fff]
[    0.010901]   node   0: [mem 0x00000000deef9000-0x00000000df5f2fff]
[    0.010902]   node   0: [mem 0x00000000df7f2000-0x00000000df7fffff]
[    0.010902]   node   0: [mem 0x0000000100000000-0x000000041effffff]
[    0.010905] Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
[    0.010908] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.010928] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.017526] On node 0, zone DMA32: 2975 pages in unavailable ranges
[    0.017547] On node 0, zone DMA32: 67 pages in unavailable ranges
[    0.017554] On node 0, zone DMA32: 511 pages in unavailable ranges
[    0.042259] On node 0, zone Normal: 2048 pages in unavailable ranges
[    0.042310] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.042402] ACPI: PM-Timer IO Port: 0x408
[    0.042409] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.042421] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.042424] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.042426] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.042429] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.042430] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.042434] TSC deadline timer available
[    0.042436] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.042453] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.042455] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.042456] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.042457] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.042457] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.042459] PM: hibernation: Registered nosave memory: [mem 0xde316000-0xde84afff]
[    0.042459] PM: hibernation: Registered nosave memory: [mem 0xde84b000-0xde84bfff]
[    0.042460] PM: hibernation: Registered nosave memory: [mem 0xde84c000-0xde966fff]
[    0.042461] PM: hibernation: Registered nosave memory: [mem 0xde967000-0xdeeb4fff]
[    0.042462] PM: hibernation: Registered nosave memory: [mem 0xdeeb6000-0xdeef8fff]
[    0.042464] PM: hibernation: Registered nosave memory: [mem 0xdf5f3000-0xdf7f1fff]
[    0.042465] PM: hibernation: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[    0.042466] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.042467] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.042467] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.042468] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.042469] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.042469] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.042470] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.042471] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.042472] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.042472] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.042473] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.042475] [mem 0xdf800000-0xf7ffffff] available for PCI devices
[    0.042476] Booting paravirtualized kernel on bare hardware
[    0.042478] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.046635] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.046838] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
[    0.046844] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
[    0.046846] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.046869] Built 1 zonelists, mobility grouping on.  Total pages: 4118966
[    0.046870] Policy zone: Normal
[    0.046871] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1dbfcfa7-397f-40e8-ae26-b04f47dabcc3 rw loglevel=3 quiet
[    0.046919] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux", will be passed to user space.
[    0.047722] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.048133] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.048313] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[    0.101328] Memory: 16319688K/16738028K available (14344K kernel code, 2071K rwdata, 10792K rodata, 1864K init, 3836K bss, 418080K reserved, 0K cma-reserved)
[    0.101335] random: get_random_u64 called from __kmem_cache_create+0x2a/0x540 with crng_init=0
[    0.101462] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.101473] Kernel/User page tables isolation: enabled
[    0.101489] ftrace: allocating 44301 entries in 174 pages
[    0.114186] ftrace: allocated 174 pages with 5 groups
[    0.114281] rcu: Preemptible hierarchical RCU implementation.
[    0.114283] rcu:     RCU dyntick-idle grace-period acceleration is enabled.
[    0.114283] rcu:     RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.114284] rcu:     RCU priority boosting: priority 1 delay 500 ms.
[    0.114285]  Trampoline variant of Tasks RCU enabled.
[    0.114286]  Rude variant of Tasks RCU enabled.
[    0.114286]  Tracing variant of Tasks RCU enabled.
[    0.114287] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.114288] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.117914] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.118183] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.118224] Console: colour dummy device 80x25
[    0.118236] printk: console [tty0] enabled
[    0.118253] ACPI: Core revision 20210730
[    0.118337] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.118352] APIC: Switch to symmetric I/O mode setup
[    0.118353] DMAR: Host address width 36
[    0.118354] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[    0.118358] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.118360] DMAR: RMRR base: 0x000000de53d000 end: 0x000000de559fff
[    0.118363] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed90000 IOMMU 0
[    0.118364] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[    0.118365] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.118664] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.118666] x2apic enabled
[    0.118672] Switched APIC routing to cluster x2apic.
[    0.119098] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.135020] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30e4fa859d7, max_idle_ns: 440795214756 ns
[    0.135024] Calibrating delay loop (skipped), value calculated using timer frequency.. 6786.77 BogoMIPS (lpj=11306840)
[    0.135027] pid_max: default: 32768 minimum: 301
[    0.135047] LSM: Security Framework initializing
[    0.135055] landlock: Up and running.
[    0.135056] Yama: becoming mindful.
[    0.135064] LSM support for eBPF active
[    0.135099] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.135130] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.135345] CPU0: Thermal monitoring enabled (TM1)
[    0.135364] process: using mwait in idle threads
[    0.135365] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.135367] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.135370] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.135371] Spectre V2 : Mitigation: Full generic retpoline
[    0.135372] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.135372] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.135373] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.135374] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.135375] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.135378] SRBDS: Vulnerable: No microcode
[    0.135378] MDS: Mitigation: Clear CPU buffers
[    0.137700] Freeing SMP alternatives memory: 36K
[    0.138426] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1114
[    0.138433] smpboot: CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.138580] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.138587] ... version:                3
[    0.138588] ... bit width:              48
[    0.138589] ... generic registers:      4
[    0.138589] ... value mask:             0000ffffffffffff
[    0.138590] ... max period:             00007fffffffffff
[    0.138591] ... fixed-purpose events:   3
[    0.138591] ... event mask:             000000070000000f
[    0.138703] rcu: Hierarchical SRCU implementation.
[    0.139343] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.139414] smp: Bringing up secondary CPUs ...
[    0.139520] x86: Booting SMP configuration:
[    0.139521] .... node  #0, CPUs:      #1 #2 #3 #4
[    0.150435] MDS CPU bug present and SMT on, data leak possible. See [url]https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html[/url] for more details.
[    0.150435]  #5 #6 #7
[    0.155081] smp: Brought up 1 node, 8 CPUs
[    0.155081] smpboot: Max logical packages: 1
[    0.155081] smpboot: Total of 8 processors activated (54294.20 BogoMIPS)
[    0.158434] devtmpfs: initialized
[    0.158434] x86/mm: Memory block size: 128MB
[    0.159219] ACPI: PM: Registering ACPI NVS region [mem 0xde84c000-0xde966fff] (1159168 bytes)
[    0.159219] ACPI: PM: Registering ACPI NVS region [mem 0xdeeb6000-0xdeef8fff] (274432 bytes)
[    0.159219] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.159219] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.159219] pinctrl core: initialized pinctrl subsystem
[    0.159219] PM: RTC time: 17:00:52, date: 2022-01-03
[    0.159219] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.159219] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.159219] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.159219] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.159219] audit: initializing netlink subsys (disabled)
[    0.159219] audit: type=2000 audit(1641229252.039:1): state=initialized audit_enabled=0 res=1
[    0.159219] thermal_sys: Registered thermal governor 'fair_share'
[    0.159219] thermal_sys: Registered thermal governor 'bang_bang'
[    0.159219] thermal_sys: Registered thermal governor 'step_wise'
[    0.159219] thermal_sys: Registered thermal governor 'user_space'
[    0.159219] thermal_sys: Registered thermal governor 'power_allocator'
[    0.159219] cpuidle: using governor ladder
[    0.159219] cpuidle: using governor menu
[    0.159219] ACPI: bus type PCI registered
[    0.159219] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.159219] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.159219] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.159219] PCI: Using configuration type 1 for base access
[    0.159219] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.159219] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.161740] Kprobes globally optimized
[    0.161744] HugeTLB: can free 6 vmemmap pages for hugepages-2048kB
[    0.161744] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.161765] ACPI: Added _OSI(Module Device)
[    0.161766] ACPI: Added _OSI(Processor Device)
[    0.161766] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.161767] ACPI: Added _OSI(Processor Aggregator Device)
[    0.161768] ACPI: Added _OSI(Linux-Dell-Video)
[    0.161769] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.161770] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.169327] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.170697] ACPI: Dynamic OEM Table Load:
[    0.170703] ACPI: SSDT 0xFFFFA06580C61000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.171438] ACPI: Dynamic OEM Table Load:
[    0.171442] ACPI: SSDT 0xFFFFA065810E9000 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.171989] ACPI: Dynamic OEM Table Load:
[    0.171992] ACPI: SSDT 0xFFFFA06580917A00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.174202] ACPI: Interpreter enabled
[    0.174222] ACPI: PM: (supports S0 S1 S3 S4 S5)
[    0.174223] ACPI: Using IOAPIC for interrupt routing
[    0.174248] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.174482] ACPI: Enabled 15 GPEs in block 00 to 3F
[    0.181796] ACPI: PM: Power Resource [FN00]
[    0.181867] ACPI: PM: Power Resource [FN01]
[    0.181934] ACPI: PM: Power Resource [FN02]
[    0.182003] ACPI: PM: Power Resource [FN03]
[    0.182069] ACPI: PM: Power Resource [FN04]
[    0.182664] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.182671] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.182969] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.183160] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC]
[    0.183725] PCI host bridge to bus 0000:00
[    0.183727] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.183729] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.183731] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.183732] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.183733] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.183734] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.183735] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.183736] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.183737] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.183739] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.183740] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.183792] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[    0.183970] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.184000] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.184169] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.184188] pci 0000:00:14.0: reg 0x10: [mem 0xf7100000-0xf710ffff 64bit]
[    0.184254] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.184407] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.184423] pci 0000:00:1a.0: reg 0x10: [mem 0xf7118000-0xf71183ff]
[    0.184504] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.184655] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.184672] pci 0000:00:1b.0: reg 0x10: [mem 0xf7110000-0xf7113fff 64bit]
[    0.184747] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.184914] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.185068] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.185250] pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
[    0.185337] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.185495] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.185511] pci 0000:00:1d.0: reg 0x10: [mem 0xf7117000-0xf71173ff]
[    0.185592] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.185741] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100
[    0.185982] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[    0.185994] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.186002] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.186010] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.186017] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.186024] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.186032] pci 0000:00:1f.2: reg 0x24: [mem 0xf7116000-0xf71167ff]
[    0.186071] pci 0000:00:1f.2: PME# supported from D3hot
[    0.186210] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.186226] pci 0000:00:1f.3: reg 0x10: [mem 0xf7115000-0xf71150ff 64bit]
[    0.186246] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.186351] pci 0000:01:00.0: [10de:1c82] type 00 class 0x030000
[    0.186362] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.186371] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.186380] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.186386] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.186392] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.186398] pci 0000:01:00.0: enabling Extended Tags
[    0.186474] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.186514] pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300
[    0.186525] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.186557] pci 0000:01:00.1: enabling Extended Tags
[    0.186642] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.186644] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.186646] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.186648] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.186712] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.186801] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.186825] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.186857] pci 0000:03:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[    0.186878] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    0.186997] pci 0000:03:00.0: supports D1 D2
[    0.186998] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.187144] pci 0000:00:1c.6: PCI bridge to [bus 03]
[    0.187148] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    0.187156] pci 0000:00:1c.6:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.187638] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.187702] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.187766] ACPI: PCI: Interrupt link LNKC configured for IRQ 3
[    0.187828] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.187890] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.187891] ACPI: PCI: Interrupt link LNKE disabled
[    0.187953] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.187954] ACPI: PCI: Interrupt link LNKF disabled
[    0.188016] ACPI: PCI: Interrupt link LNKG configured for IRQ 5
[    0.188079] ACPI: PCI: Interrupt link LNKH configured for IRQ 4
[    0.188367] iommu: Default domain type: Translated 
[    0.188369] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.188381] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.188381] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.188381] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.188381] vgaarb: loaded
[    0.188501] SCSI subsystem initialized
[    0.188507] libata version 3.00 loaded.
[    0.188507] ACPI: bus type USB registered
[    0.188507] usbcore: registered new interface driver usbfs
[    0.188507] usbcore: registered new interface driver hub
[    0.188507] usbcore: registered new device driver usb
[    0.188507] pps_core: LinuxPPS API ver. 1 registered
[    0.188507] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.188507] PTP clock support registered
[    0.188507] EDAC MC: Ver: 3.0.0
[    0.188507] NetLabel: Initializing
[    0.188507] NetLabel:  domain hash size = 128
[    0.188507] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.188507] NetLabel:  unlabeled traffic allowed by default
[    0.188507] PCI: Using ACPI for IRQ routing
[    0.189929] PCI: pci_cache_line_size set to 64 bytes
[    0.189964] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.189966] e820: reserve RAM buffer [mem 0xde316000-0xdfffffff]
[    0.189967] e820: reserve RAM buffer [mem 0xdeeb6000-0xdfffffff]
[    0.189968] e820: reserve RAM buffer [mem 0xdf5f3000-0xdfffffff]
[    0.189969] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[    0.189970] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
[    0.189975] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.189975] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.192744] clocksource: Switched to clocksource tsc-early
[    0.199030] VFS: Disk quotas dquot_6.6.0
[    0.199044] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.199115] pnp: PnP ACPI init
[    0.199224] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.199311] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.199313] system 00:01: [io  0x0200-0x020f] has been reserved
[    0.199315] system 00:01: [io  0xffff] has been reserved
[    0.199316] system 00:01: [io  0xffff] has been reserved
[    0.199317] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.199319] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.199320] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.199321] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.199388] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.199539] system 00:04: [io  0x0a00-0x0a1f] has been reserved
[    0.199541] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.199542] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.199616] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.199859] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.199861] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.199863] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.199865] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.199866] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.199868] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.199869] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.199871] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.199873] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.199874] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.199876] system 00:06: [mem 0xf2200000-0xf2200fff] has been reserved
[    0.200037] pnp: PnP ACPI: found 7 devices
[    0.205672] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.205719] NET: Registered PF_INET protocol family
[    0.205851] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.207570] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.207639] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.207811] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.207873] TCP: Hash tables configured (established 131072 bind 65536)
[    0.207937] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.207997] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.208032] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.208085] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.208089] NET: Registered PF_XDP protocol family
[    0.208098] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.208101] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.208104] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.208106] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.208109] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.208126] pci 0000:00:1c.6: PCI bridge to [bus 03]
[    0.208128] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    0.208135] pci 0000:00:1c.6:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.208141] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.208142] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.208144] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.208145] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.208146] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.208147] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.208148] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.208150] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.208151] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.208152] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.208154] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.208155] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.208156] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.208157] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.208158] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.228431] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 19494 usecs
[    0.248448] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 19530 usecs
[    0.248471] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.248496] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.248531] PCI: CLS 64 bytes, default 64
[    0.248556] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.248557] software IO TLB: mapped [mem 0x00000000da316000-0x00000000de316000] (64MB)
[    0.248581] Trying to unpack rootfs image as initramfs...
[    0.255722] Initialise system trusted keyrings
[    0.255732] Key type blacklist registered
[    0.255762] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.256725] zbud: loaded
[    0.265420] Key type asymmetric registered
[    0.265423] Asymmetric key parser 'x509' registered
[    0.265444] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.265474] io scheduler mq-deadline registered
[    0.265476] io scheduler kyber registered
[    0.265506] io scheduler bfq registered
[    0.266080] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.266486] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.271748] ACPI: button: Power Button [PWRB]
[    0.271792] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.271848] ACPI: button: Power Button [PWRF]
[    0.272542] thermal LNXTHERM:00: registered as thermal_zone0
[    0.272544] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    0.272829] thermal LNXTHERM:01: registered as thermal_zone1
[    0.272831] ACPI: thermal: Thermal Zone [TZ01] (30 C)
[    0.272966] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.274291] Non-volatile memory driver v1.3
[    0.274293] Linux agpgart interface v0.103
[    0.274294] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.274911] ahci 0000:00:1f.2: version 3.0
[    0.288400] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
[    0.288407] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.328660] Freeing initrd memory: 19300K
[    0.329037] scsi host0: ahci
[    0.329291] scsi host1: ahci
[    0.329514] scsi host2: ahci
[    0.329650] scsi host3: ahci
[    0.329793] scsi host4: ahci
[    0.329912] scsi host5: ahci
[    0.329938] ata1: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116100 irq 26
[    0.329942] ata2: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116180 irq 26
[    0.329944] ata3: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116200 irq 26
[    0.329946] ata4: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116280 irq 26
[    0.329949] ata5: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116300 irq 26
[    0.329950] ata6: DUMMY
[    0.329993] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.330006] ehci-pci: EHCI PCI platform driver
[    0.330167] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.330173] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.330185] ehci-pci 0000:00:1a.0: debug port 2
[    0.334091] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7118000
[    0.345076] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.345143] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    0.345146] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.345147] usb usb1: Product: EHCI Host Controller
[    0.345148] usb usb1: Manufacturer: Linux 5.15.12-arch1-1 ehci_hcd
[    0.345149] usb usb1: SerialNumber: 0000:00:1a.0
[    0.345330] hub 1-0:1.0: USB hub found
[    0.345338] hub 1-0:1.0: 2 ports detected
[    0.345566] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.345570] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.345580] ehci-pci 0000:00:1d.0: debug port 2
[    0.349501] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7117000
[    0.361740] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.361804] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    0.361806] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.361808] usb usb2: Product: EHCI Host Controller
[    0.361809] usb usb2: Manufacturer: Linux 5.15.12-arch1-1 ehci_hcd
[    0.361810] usb usb2: SerialNumber: 0000:00:1d.0
[    0.361970] hub 2-0:1.0: USB hub found
[    0.361977] hub 2-0:1.0: 2 ports detected
[    0.362105] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.362109] ohci-pci: OHCI PCI platform driver
[    0.362115] uhci_hcd: USB Universal Host Controller Interface driver
[    0.362144] usbcore: registered new interface driver usbserial_generic
[    0.362148] usbserial: USB Serial support registered for generic
[    0.362396] rtc_cmos 00:02: RTC can wake from S4
[    0.362694] rtc_cmos 00:02: registered as rtc0
[    0.362729] rtc_cmos 00:02: setting system clock to 2022-01-03T17:00:52 UTC (1641229252)
[    0.362745] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.363104] intel_pstate: Intel P-state driver initializing
[    0.363712] ledtrig-cpu: registered to indicate activity on CPUs
[    0.364118] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.364121] vesafb: scrolling: redraw
[    0.364123] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.364140] vesafb: framebuffer at 0xf1000000, mapped to 0x00000000f2c5e52b, using 8128k, total 8128k
[    0.364212] fbcon: Deferring console take-over
[    0.364214] fb0: VESA VGA frame buffer device
[    0.364237] hid: raw HID events driver (C) Jiri Kosina
[    0.364343] drop_monitor: Initializing network drop monitor service
[    0.364446] Initializing XFRM netlink socket
[    0.364590] NET: Registered PF_INET6 protocol family
[    0.369978] Segment Routing with IPv6
[    0.369980] RPL Segment Routing with IPv6
[    0.369986] In-situ OAM (IOAM) with IPv6
[    0.370000] NET: Registered PF_PACKET protocol family
[    0.370603] microcode: sig=0x306a9, pf=0x2, revision=0x21
[    0.370676] microcode: Microcode Update Driver: v2.2.
[    0.370680] IPI shorthand broadcast: enabled
[    0.370688] sched_clock: Marking stable (370313067, 249208)->(378373593, -7811318)
[    0.370895] registered taskstats version 1
[    0.371121] Loading compiled-in X.509 certificates
[    0.373772] Loaded X.509 cert 'Build time autogenerated kernel key: d2094633047b7eebd2131812d6ef772775a49f35'
[    0.374013] zswap: loaded using pool lz4/z3fold
[    0.374363] Key type ._fscrypt registered
[    0.374364] Key type .fscrypt registered
[    0.374364] Key type fscrypt-provisioning registered
[    0.374577] PM:   Magic number: 6:956:35
[    0.374639] memory memory71: hash matches
[    0.374713] RAS: Correctable Errors collector initialized.
[    0.595076] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.611749] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.645072] ata5: SATA link down (SStatus 0 SControl 300)
[    0.645103] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.645130] ata4: SATA link down (SStatus 0 SControl 300)
[    0.645172] ata3: SATA link down (SStatus 0 SControl 300)
[    0.645220] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.646101] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.646111] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.646115] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.646492] ata2.00: supports DRM functions and may not be fully accessible
[    0.646498] ata2.00: ATA-11: Samsung SSD 870 EVO 1TB, SVT02B6Q, max UDMA/133
[    0.647108] ata2.00: disabling queued TRIM support
[    0.647115] ata2.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    0.649689] ata2.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    0.650559] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.650569] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.650573] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.650888] ata2.00: supports DRM functions and may not be fully accessible
[    0.651530] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.651540] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.651545] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.651593] ata2.00: disabling queued TRIM support
[    0.654117] ata2.00: configured for UDMA/133
[    0.657674] ata1.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
[    0.659149] ata1.00: ATA Identify Device Log not supported
[    0.659156] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.665549] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.665559] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.665563] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.673247] ata1.00: ATA Identify Device Log not supported
[    0.673258] ata1.00: configured for UDMA/133
[    0.673417] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD204UI  0001 PQ: 0 ANSI: 5
[    0.673654] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    0.673657] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 870  2B6Q PQ: 0 ANSI: 5
[    0.673667] sd 0:0:0:0: [sda] Write Protect is off
[    0.673679] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.673696] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.673856] ata2.00: Enabling discard_zeroes_data
[    0.673910] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    0.673929] sd 1:0:0:0: [sdb] Write Protect is off
[    0.673931] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.673966] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.674292] ata2.00: Enabling discard_zeroes_data
[    0.688798]  sdb: sdb1 sdb2 sdb3
[    0.689193] ata2.00: Enabling discard_zeroes_data
[    0.699044]  sda: sda1
[    0.706236] sd 1:0:0:0: [sdb] supports TCG Opal
[    0.706243] sd 1:0:0:0: [sdb] Attached SCSI disk
[    0.715157] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.716021] Freeing unused decrypted memory: 2036K
[    0.716315] Freeing unused kernel image (initmem) memory: 1864K
[    0.716372] Write protecting the kernel read-only data: 28672k
[    0.716765] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.716972] Freeing unused kernel image (rodata/data gap) memory: 1496K
[    0.745454] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    0.745457] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.745733] hub 1-1:1.0: USB hub found
[    0.745805] hub 1-1:1.0: 6 ports detected
[    0.755529] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.755533] rodata_test: all tests were successful
[    0.755534] x86/mm: Checking user space page tables
[    0.758829] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    0.758832] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.759110] hub 2-1:1.0: USB hub found
[    0.759201] hub 2-1:1.0: 8 ports detected
[    0.792304] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.792308] Run /init as init process
[    0.792309]   with arguments:
[    0.792310]     /init
[    0.792310]   with environment:
[    0.792311]     HOME=/
[    0.792311]     TERM=linux
[    0.792312]     BOOT_IMAGE=/boot/vmlinuz-linux
[    0.803215] fbcon: Taking over console
[    0.803282] Console: switching to colour frame buffer device 240x67
[    1.027223] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.027230] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.028291] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[    1.028472] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.028476] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.028479] usb usb3: Product: xHCI Host Controller
[    1.028480] usb usb3: Manufacturer: Linux 5.15.12-arch1-1 xhci-hcd
[    1.028482] usb usb3: SerialNumber: 0000:00:14.0
[    1.028596] hub 3-0:1.0: USB hub found
[    1.028608] hub 3-0:1.0: 4 ports detected
[    1.029140] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.029143] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.029146] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.029179] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    1.029180] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.029182] usb usb4: Product: xHCI Host Controller
[    1.029182] usb usb4: Manufacturer: Linux 5.15.12-arch1-1 xhci-hcd
[    1.029183] usb usb4: SerialNumber: 0000:00:14.0
[    1.029275] hub 4-0:1.0: USB hub found
[    1.029284] hub 4-0:1.0: 4 ports detected
[    1.031704] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.038381] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[    1.136065] usb 1-1.2: New USB device found, idVendor=4e53, idProduct=5407, bcdDevice= 1.00
[    1.136069] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.136070] usb 1-1.2: Product: USB OPTICAL MOUSE 
[    1.136826] random: fast init done
[    1.157082] usb 2-1.5: New USB device found, idVendor=0bda, idProduct=0181, bcdDevice=81.97
[    1.157085] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.157086] usb 2-1.5: Product: USB2.0-CRW
[    1.157087] usb 2-1.5: Manufacturer: Generic
[    1.157088] usb 2-1.5: SerialNumber: 20060413092100000
[    1.170086] usb-storage 2-1.5:1.0: USB Mass Storage device detected
[    1.170248] scsi host6: usb-storage 2-1.5:1.0
[    1.170342] usbcore: registered new interface driver usb-storage
[    1.175777] usbcore: registered new interface driver uas
[    1.208379] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[    1.265061] tsc: Refined TSC clocksource calibration: 3392.294 MHz
[    1.265073] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5debfb38, max_idle_ns: 440795265279 ns
[    1.265153] clocksource: Switched to clocksource tsc
[    1.358486] usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd
[    1.376012] usb 4-4: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[    1.376019] usb 4-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.376022] usb 4-4: Product: Best USB Device
[    1.376024] usb 4-4: Manufacturer: ULT-Best
[    1.376026] usb 4-4: SerialNumber: 042101166BB7
[    1.378541] scsi host7: uas
[    1.378966] scsi 7:0:0:0: Direct-Access     ST332041 8AS              0    PQ: 0 ANSI: 6
[    1.380209] sd 7:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.380339] sd 7:0:0:0: [sdc] Write Protect is off
[    1.380342] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    1.380499] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.380700] sd 7:0:0:0: [sdc] Optimal transfer size 33553920 bytes
[    1.421154]  sdc: sdc1 sdc2
[    1.450925] usb 1-1.3: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=19.58
[    1.450942] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.450945] usb 1-1.3: Product: EDRClassone
[    1.452495] sd 7:0:0:0: [sdc] Attached SCSI disk
[    1.525056] usb 1-1.4: new high-speed USB device number 5 using ehci-pci
[    1.636629] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=64ab, bcdDevice= 6.19
[    1.636637] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.636640] usb 1-1.4: Product: Integrated Camera
[    1.636642] usb 1-1.4: Manufacturer: 9726-200619
[    1.715057] usb 1-1.6: new low-speed USB device number 6 using ehci-pci
[    1.818490] usb 1-1.6: New USB device found, idVendor=0e6a, idProduct=02c0, bcdDevice= 3.21
[    1.818497] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.818500] usb 1-1.6: Product: PS/2+USB Keyboard
[    1.818502] usb 1-1.6: Manufacturer: dakai
[    1.832989] input: USB OPTICAL MOUSE  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:4E53:5407.0001/input/input2
[    1.833040] hid-generic 0003:4E53:5407.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:1a.0-1.2/input0
[    1.836369] input: USB OPTICAL MOUSE  Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:4E53:5407.0002/input/input3
[    1.892160] hid-generic 0003:4E53:5407.0002: input,hiddev96,hidraw1: USB HID v1.10 Keyboard [USB OPTICAL MOUSE ] on usb-0000:00:1a.0-1.2/input1
[    1.895366] input: dakai PS/2+USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:0E6A:02C0.0003/input/input5
[    1.952141] hid-generic 0003:0E6A:02C0.0003: input,hidraw2: USB HID v1.11 Keyboard [dakai PS/2+USB Keyboard] on usb-0000:00:1a.0-1.6/input0
[    1.960179] input: dakai PS/2+USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:0E6A:02C0.0004/input/input6
[    2.015228] input: dakai PS/2+USB Keyboard System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:0E6A:02C0.0004/input/input7
[    2.015394] input: dakai PS/2+USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:0E6A:02C0.0004/input/input9
[    2.015673] hid-generic 0003:0E6A:02C0.0004: input,hiddev97,hidraw3: USB HID v1.11 Keyboard [dakai PS/2+USB Keyboard] on usb-0000:00:1a.0-1.6/input1
[    2.015729] usbcore: registered new interface driver usbhid
[    2.015731] usbhid: USB HID core driver
[    2.175315] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    2.178585] scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[    2.181707] scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    2.184814] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro/HG     1.00 PQ: 0 ANSI: 0 CCS
[    2.187960] scsi 6:0:0:4: Direct-Access     Generic- SD/MMC/MS/MSPRO  1.00 PQ: 0 ANSI: 0 CCS
[    2.190872] sd 6:0:0:0: [sdd] Media removed, stopped polling
[    2.193418] sd 6:0:0:1: [sde] Media removed, stopped polling
[    2.195851] sd 6:0:0:2: [sdf] Media removed, stopped polling
[    2.201002] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[    2.213852] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[    2.216336] sd 6:0:0:3: [sdg] Media removed, stopped polling
[    2.223952] sd 6:0:0:3: [sdg] Attached SCSI removable disk
[    2.234103] sd 6:0:0:4: [sdh] Media removed, stopped polling
[    2.241706] sd 6:0:0:4: [sdh] Attached SCSI removable disk
[    2.270328] sd 6:0:0:1: [sde] Attached SCSI removable disk
[    2.342640] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    3.733498] systemd[1]: systemd 250-4-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    3.748507] systemd[1]: Detected architecture x86-64.
[    3.753158] random: crng init done
[    3.757031] systemd[1]: Hostname set to <jb-arch-pc>.
[    6.742330] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[    6.949578] systemd[1]: Queued start job for default target Graphical Interface.
[    6.951460] systemd[1]: Created slice Slice /system/getty.
[    6.952073] systemd[1]: Created slice Slice /system/modprobe.
[    6.952482] systemd[1]: Created slice User and Session Slice.
[    6.952599] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.952853] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.952916] systemd[1]: Reached target Login Prompts.
[    6.952941] systemd[1]: Reached target Local Integrity Protected Volumes.
[    6.952977] systemd[1]: Reached target Remote File Systems.
[    6.952997] systemd[1]: Reached target Slice Units.
[    6.953035] systemd[1]: Reached target Local Verity Protected Volumes.
[    6.953154] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.953334] systemd[1]: Listening on LVM2 poll daemon socket.
[    6.955332] systemd[1]: Listening on Process Core Dump Socket.
[    6.955622] systemd[1]: Listening on Journal Audit Socket.
[    6.955824] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.956030] systemd[1]: Listening on Journal Socket.
[    6.970696] systemd[1]: Listening on udev Control Socket.
[    6.970887] systemd[1]: Listening on udev Kernel Socket.
[    6.972257] systemd[1]: Mounting Huge Pages File System...
[    6.973455] systemd[1]: Mounting POSIX Message Queue File System...
[    6.974487] systemd[1]: Mounting Kernel Debug File System...
[    6.975739] systemd[1]: Mounting Kernel Trace File System...
[    6.976961] systemd[1]: Starting Create List of Static Device Nodes...
[    6.977579] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    6.978204] systemd[1]: Starting Load Kernel Module configfs...
[    6.978856] systemd[1]: Starting Load Kernel Module drm...
[    6.979606] systemd[1]: Starting Load Kernel Module fuse...
[    6.979748] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[    6.980923] systemd[1]: Starting Journal Service...
[    7.077848] fuse: init (API version 7.34)
[    7.112374] systemd[1]: Starting Load Kernel Modules...
[    7.113453] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.113570] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[    7.114640] systemd[1]: Starting Coldplug All udev Devices...
[    7.116161] systemd[1]: Mounted Huge Pages File System.
[    7.116268] systemd[1]: Mounted POSIX Message Queue File System.
[    7.116355] systemd[1]: Mounted Kernel Debug File System.
[    7.116443] systemd[1]: Mounted Kernel Trace File System.
[    7.116613] systemd[1]: Finished Create List of Static Device Nodes.
[    7.116714] audit: type=1130 audit(1641229259.249:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.116899] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    7.116998] systemd[1]: Finished Load Kernel Module configfs.
[    7.117018] audit: type=1130 audit(1641229259.249:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@configfs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.117028] audit: type=1131 audit(1641229259.249:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@configfs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.117203] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    7.117298] systemd[1]: Finished Load Kernel Module drm.
[    7.117318] audit: type=1130 audit(1641229259.249:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.117327] audit: type=1131 audit(1641229259.249:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.117499] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    7.117591] systemd[1]: Finished Load Kernel Module fuse.
[    7.117609] audit: type=1130 audit(1641229259.249:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.117619] audit: type=1131 audit(1641229259.249:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.118343] systemd[1]: Mounting FUSE Control File System...
[    7.118923] systemd[1]: Mounting Kernel Configuration File System...
[    7.120271] systemd[1]: Mounted Kernel Configuration File System.
[    7.145980] systemd[1]: Mounted FUSE Control File System.
[    7.148862] systemd[1]: Started Journal Service.
[    7.148931] audit: type=1130 audit(1641229259.282:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.178676] EXT4-fs (sdc1): re-mounted. Opts: stripe=8191. Quota mode: none.
[    7.180288] audit: type=1130 audit(1641229259.312:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.340722] audit: type=1130 audit(1641229259.472:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.348223] systemd-journald[299]: Received client request to flush runtime journal.
[    8.614364] nvidia: loading out-of-tree module taints kernel.
[    8.614377] nvidia: module license 'NVIDIA' taints kernel.
[    8.614378] Disabling lock debugging due to kernel taint
[    8.623862] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    8.638745] nvidia-nvlink: Nvlink Core is being initialized, major device number 235

[    8.639731] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    8.756360] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  495.46  Wed Oct 27 16:31:33 UTC 2021
[    9.860673] nvidia_uvm: module uses symbols from proprietary module nvidia, inheriting taint.
[    9.873101] nvidia-uvm: Loaded the UVM driver, major device number 511.
[   11.143943] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  495.46  Wed Oct 27 16:22:48 UTC 2021
[   11.202307] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20210730/utaddress-204)
[   11.202314] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   11.202317] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210730/utaddress-204)
[   11.202323] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   11.202325] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210730/utaddress-204)
[   11.202330] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   11.202332] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210730/utaddress-204)
[   11.202336] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   11.202337] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.202411] input: PC Speaker as /devices/platform/pcspkr/input/input10
[   11.203380] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[   11.203383] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[   11.210580] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   11.210969] i2c i2c-0: 4/4 memory slots populated (from DMI)
[   11.211311] i2c i2c-0: Successfully instantiated SPD at 0x50
[   11.211618] i2c i2c-0: Successfully instantiated SPD at 0x51
[   11.211975] i2c i2c-0: Successfully instantiated SPD at 0x52
[   11.212294] i2c i2c-0: Successfully instantiated SPD at 0x53
[   11.249631] EDAC ie31200: No ECC support
[   11.249680] EDAC ie31200: No ECC support
[   11.492315] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[   11.492322] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   11.492325] RAPL PMU: hw unit of domain package 2^-16 Joules
[   11.493447] mousedev: PS/2 mouse device common for all mice
[   11.499504] libphy: r8169: probed
[   11.499818] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, c8:9c:dc:ff:b6:a4, XID 2c9, IRQ 28
[   11.499822] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   11.502880] Bluetooth: Core ver 2.22
[   11.502904] NET: Registered PF_BLUETOOTH protocol family
[   11.502906] Bluetooth: HCI device and connection manager initialized
[   11.502909] Bluetooth: HCI socket layer initialized
[   11.502911] Bluetooth: L2CAP socket layer initialized
[   11.502915] Bluetooth: SCO socket layer initialized
[   11.637257] mc: Linux media interface: v0.10
[   11.637261] cryptd: max_cpu_qlen set to 1000
[   11.737888] r8169 0000:03:00.0 enp3s0: renamed from eth0
[   11.819735] iTCO_vendor_support: vendor-support=0
[   11.819910] AVX version of gcm_enc/dec engaged.
[   11.819968] at24 0-0050: supply vcc not found, using dummy regulator
[   11.820007] AES CTR mode by8 optimization enabled
[   11.820672] at24 0-0050: 256 byte spd EEPROM, read-only
[   11.820851] usbcore: registered new interface driver btusb
[   11.821125] at24 0-0051: supply vcc not found, using dummy regulator
[   11.821767] at24 0-0051: 256 byte spd EEPROM, read-only
[   11.821895] at24 0-0052: supply vcc not found, using dummy regulator
[   11.822376] Bluetooth: hci0: unexpected event for opcode 0x0000
[   11.825177] at24 0-0052: 256 byte spd EEPROM, read-only
[   11.825211] at24 0-0053: supply vcc not found, using dummy regulator
[   11.825363] videodev: Linux video capture interface: v2.00
[   11.825813] at24 0-0053: 256 byte spd EEPROM, read-only
[   11.923554] iTCO_wdt iTCO_wdt.1.auto: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[   11.923688] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[   11.938868] snd_hda_intel 0000:01:00.1: Disabling MSI
[   11.938872] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   11.978436] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   11.978508] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   11.978557] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   11.978606] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   11.978653] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[   11.978701] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[   12.079577] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[   12.079597] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.079600] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   12.079603] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   12.079605] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   12.079607] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   12.079610] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   12.079612] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   12.079614] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   12.080203] usb 1-1.4: Found UVC 1.00 device Integrated Camera (0c45:64ab)
[   12.081376] usb 1-1.4: Failed to query (GET_INFO) UVC control 3 on unit 1: -32 (exp. 1).
[   12.084752] usb 1-1.4: Failed to query (GET_INFO) UVC control 3 on unit 2: -75 (exp. 1).
[   12.099636] uvcvideo 1-1.4:1.1: Failed to query (129) UVC probe control : -75 (exp. 26).
[   12.099641] uvcvideo 1-1.4:1.1: Failed to initialize the device (-5).
[   12.099697] usbcore: registered new interface driver uvcvideo
[   12.099742] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   12.099808] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   12.099890] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   12.099953] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[   12.100018] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[   12.100071] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[   12.100126] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[   12.793247] intel_rapl_common: Found RAPL domain package
[   12.793254] intel_rapl_common: Found RAPL domain core
[   12.793264] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[   12.848166] Adding 4194300k swap on /dev/sdc2.  Priority:-2 extents:1 across:4194300k FS
[   13.070677] kauditd_printk_skb: 14 callbacks suppressed
[   13.070681] audit: type=1130 audit(1641229265.202:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.183881] audit: type=1130 audit(1641229265.315:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.492761] audit: type=1130 audit(1641229265.625:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.508682] audit: type=1127 audit(1641229265.642:29): pid=480 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[   13.526219] audit: type=1130 audit(1641229265.659:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.703021] audit: type=1130 audit(1641229265.835:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.681005] audit: type=1130 audit(1641229266.812:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.708338] audit: type=1130 audit(1641229266.839:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.752820] audit: type=1130 audit(1641229266.885:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.755769] audit: type=1334 audit(1641229266.889:35): prog-id=17 op=LOAD
[   18.153625] RTL8211E Gigabit Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[   18.396985] r8169 0000:03:00.0 enp3s0: Link is Down
[   18.428999] kauditd_printk_skb: 15 callbacks suppressed
[   18.429004] audit: type=1130 audit(1641229270.562:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cups comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.717375] resource sanity check: requesting [mem 0x000e0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window]
[   19.717386] caller _nv032275rm+0x2a/0x60 [nvidia] mapping multiple BARs
[   19.926295] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[   19.926298] caller _nv000717rm+0x1ad/0x200 [nvidia] mapping multiple BARs
[   20.005666] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
[   20.005677] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   22.328593] audit: type=1100 audit(1641229274.462:52): pid=527 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_faillock,pam_shells,pam_permit acct="jb" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success'
[   22.348463] audit: type=1101 audit(1641229274.482:53): pid=527 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="jb" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success'
[   22.349777] audit: type=1103 audit(1641229274.482:54): pid=527 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_faillock,pam_shells,pam_permit acct="jb" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success'
[   22.349923] audit: type=1006 audit(1641229274.482:55): pid=527 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[   22.349934] audit: type=1300 audit(1641229274.482:55): arch=c000003e syscall=1 success=yes exit=4 a0=8 a1=7ffceb5f0560 a2=4 a3=3e8 items=0 ppid=507 pid=527 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="sddm-helper" exe="/usr/lib/sddm/sddm-helper" key=(null)
[   22.349939] audit: type=1327 audit(1641229274.482:55): proctitle=2F7573722F6C69622F7364646D2F7364646D2D68656C706572002D2D736F636B6574002F746D702F7364646D2D6175746833306134636437342D323663332D346232362D616333302D633038346430643364623833002D2D69640031002D2D7374617274002F7573722F62696E2F7374617274706C61736D612D783131002D2D
[   22.428849] audit: type=1130 audit(1641229274.562:56): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.437120] audit: type=1101 audit(1641229274.569:57): pid=530 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="jb" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.437128] audit: type=1103 audit(1641229274.569:58): pid=530 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="jb" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   28.009817] kauditd_printk_skb: 10 callbacks suppressed
[   28.009822] audit: type=1131 audit(1641229280.142:65): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   33.523295] audit: type=1130 audit(1641229285.655:66): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   40.761277] audit: type=1334 audit(1641229292.892:67): prog-id=24 op=LOAD
[   40.761326] audit: type=1334 audit(1641229292.892:68): prog-id=25 op=LOAD
[   41.616931] audit: type=1130 audit(1641229293.749:69): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   42.791851] audit: type=1130 audit(1641229294.925:70): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   44.873376] audit: type=1130 audit(1641229297.005:71): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   46.314292] audit: type=1131 audit(1641229298.445:72): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   46.408453] audit: type=1334 audit(1641229298.542:73): prog-id=0 op=UNLOAD
[   46.408464] audit: type=1334 audit(1641229298.542:74): prog-id=0 op=UNLOAD
[   46.408468] audit: type=1334 audit(1641229298.542:75): prog-id=0 op=UNLOAD
[  116.684144] audit: type=1100 audit(1641229368.815:76): pid=893 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="jb" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[  116.684424] audit: type=1101 audit(1641229368.815:77): pid=893 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="jb" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[  116.685922] audit: type=1110 audit(1641229368.819:78): pid=893 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[  116.686168] audit: type=1105 audit(1641229368.819:79): pid=893 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[  116.701572] audit: type=1106 audit(1641229368.832:80): pid=893 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[  116.701672] audit: type=1104 audit(1641229368.832:81): pid=893 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[  129.102712] usb 1-1.4: USB disconnect, device number 5
[  130.588368] usb 1-1.4: new high-speed USB device number 7 using ehci-pci
[  130.693959] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=64ab, bcdDevice= 6.19
[  130.693966] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  130.693969] usb 1-1.4: Product: Integrated Camera
[  130.693972] usb 1-1.4: Manufacturer: 9726-200619
[  130.696752] usb 1-1.4: Found UVC 1.00 device Integrated Camera (0c45:64ab)
[  130.699229] usb 1-1.4: Failed to query (GET_INFO) UVC control 3 on unit 1: -32 (exp. 1).
[  130.720520] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input24
[  131.918657] usb 1-1.4: USB disconnect, device number 7
[  132.191684] usb 1-1.4: new high-speed USB device number 8 using ehci-pci
[  132.481684] usb 1-1.4: device descriptor read/64, error -71
[  133.085032] usb 1-1.4: device descriptor read/64, error -71
[  133.265015] usb 1-1.4: new high-speed USB device number 9 using ehci-pci
[  133.370563] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=64ab, bcdDevice= 6.19
[  133.370571] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  133.370574] usb 1-1.4: Product: Integrated Camera
[  133.370576] usb 1-1.4: Manufacturer: 9726-200619
[  133.374733] usb 1-1.4: Found UVC 1.00 device Integrated Camera (0c45:64ab)
[  133.375938] usb 1-1.4: Failed to query (GET_INFO) UVC control 3 on unit 1: -32 (exp. 1).
[  133.397987] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input25
[  133.710679] usb 1-1.4: USB disconnect, device number 9
[  134.938366] usb 1-1.4: new high-speed USB device number 10 using ehci-pci
[  135.043926] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=64ab, bcdDevice= 6.19
[  135.043934] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  135.043937] usb 1-1.4: Product: Integrated Camera
[  135.043939] usb 1-1.4: Manufacturer: 9726-200619
[  135.046723] usb 1-1.4: Found UVC 1.00 device Integrated Camera (0c45:64ab)
[  135.049199] usb 1-1.4: Failed to query (GET_INFO) UVC control 3 on unit 1: -32 (exp. 1).
[  135.071348] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input26
[  135.246577] usb 1-1.6: USB disconnect, device number 6
[  135.831682] usb 1-1.6: new low-speed USB device number 11 using ehci-pci
[  135.935195] usb 1-1.6: New USB device found, idVendor=0e6a, idProduct=02c0, bcdDevice= 3.21
[  135.935203] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  135.935206] usb 1-1.6: Product: PS/2+USB Keyboard
[  135.935209] usb 1-1.6: Manufacturer: dakai
[  135.939296] input: dakai PS/2+USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:0E6A:02C0.0005/input/input27
[  135.995361] hid-generic 0003:0E6A:02C0.0005: input,hidraw2: USB HID v1.11 Keyboard [dakai PS/2+USB Keyboard] on usb-0000:00:1a.0-1.6/input0
[  136.001984] input: dakai PS/2+USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:0E6A:02C0.0006/input/input28
[  136.058572] input: dakai PS/2+USB Keyboard System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:0E6A:02C0.0006/input/input29
[  136.058687] input: dakai PS/2+USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:0E6A:02C0.0006/input/input31
[  136.058869] hid-generic 0003:0E6A:02C0.0006: input,hiddev97,hidraw3: USB HID v1.11 Keyboard [dakai PS/2+USB Keyboard] on usb-0000:00:1a.0-1.6/input1
[  136.059122] usb 1-1.4: USB disconnect, device number 10
[  136.311677] usb 1-1.4: new high-speed USB device number 12 using ehci-pci
[  136.417437] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=64ab, bcdDevice= 6.19
[  136.417445] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  136.417448] usb 1-1.4: Product: Integrated Camera
[  136.417451] usb 1-1.4: Manufacturer: 9726-200619
[  136.420086] usb 1-1.4: Found UVC 1.00 device Integrated Camera (0c45:64ab)
[  136.421693] usb 1-1.4: Failed to query (GET_INFO) UVC control 3 on unit 1: -32 (exp. 1).
[  136.443676] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input32
[  136.782633] usb 1-1.4: USB disconnect, device number 12
[  137.035016] usb 1-1.4: new high-speed USB device number 13 using ehci-pci
[  137.325017] usb 1-1.4: device descriptor read/64, error -71
[  137.721699] usb 1-1.4: device descriptor read/64, error -71
[  138.108367] usb 1-1.4: new high-speed USB device number 14 using ehci-pci
[  138.214032] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=64ab, bcdDevice= 6.19
[  138.214040] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  138.214043] usb 1-1.4: Product: Integrated Camera
[  138.214045] usb 1-1.4: Manufacturer: 9726-200619
[  138.216823] usb 1-1.4: Found UVC 1.00 device Integrated Camera (0c45:64ab)
[  138.219312] usb 1-1.4: Failed to query (GET_INFO) UVC control 3 on unit 1: -32 (exp. 1).
[  138.241513] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input33
[  140.315036] usb 1-1.5: new full-speed USB device number 15 using ehci-pci
[  140.414007] usb 1-1.5: New USB device found, idVendor=aa98, idProduct=1234, bcdDevice= 1.00
[  140.414014] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  140.414018] usb 1-1.5: Product: USB MIC Device
[  140.414020] usb 1-1.5: Manufacturer: mvsilicon
[  140.414022] usb 1-1.5: SerialNumber: mvsilicon20200924
[  140.415671] input: mvsilicon USB MIC Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:AA98:1234.0007/input/input34
[  140.472008] hid-generic 0003:AA98:1234.0007: input,hidraw4: USB HID v2.01 Device [mvsilicon USB MIC Device] on usb-0000:00:1a.0-1.5/input2
[  140.472159] usbhid 1-1.5:1.3: couldn't find an input interrupt endpoint
[  142.947673] audit: type=1101 audit(1641229395.079:82): pid=960 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="jb" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[  142.948523] audit: type=1110 audit(1641229395.082:83): pid=960 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[  142.948665] audit: type=1105 audit(1641229395.082:84): pid=960 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'

Last edited by JuanDeag (2022-01-03 16:27:31)

V1del · 2022-01-03 16:11:22

Please wrap that in code tags

There's no indication of snd-usb-audio being loaded in that excerpt. What's your output for

sudo fuser -v /dev/snd/*
arecord -l
pacmd list-cards
pacmd list-sources

Last edited by V1del (2022-01-03 16:12:26)

JuanDeag · 2022-01-03 16:14:20

 output for arecord -l

**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 2: ALC892 Alt Analog [ALC892 Alt Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: Device [USB MIC Device], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0


output for pacmd list-cards

3 card(s) available.
    index: 0
        name: <alsa_card.pci-0000_01_00.1>
        driver: <module-alsa-card.c>
        owner module: 6
        properties:
                alsa.card = "1"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 17"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:01:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "0fb9"
                device.product.name = "GP107GL High Definition Audio Controller"
                device.string = "1"
                device.description = "GP107GL High Definition Audio Controller"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        profiles:
                output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
                output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
                output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
                output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 38468, available: unknown)
                output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
                output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
                output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
                output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
                output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
                output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
                output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5700, available: no)
                output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 600, available: no)
                output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 600, available: no)
                output:hdmi-stereo-extra5: Digital Stereo (HDMI 6) Output (priority 5700, available: no)
                output:hdmi-surround-extra5: Digital Surround 5.1 (HDMI 6) Output (priority 600, available: no)
                output:hdmi-surround71-extra5: Digital Surround 7.1 (HDMI 6) Output (priority 600, available: no)
                off: Off (priority 0, available: unknown)
        active profile: <output:hdmi-stereo-extra1>
        sinks:
                alsa_output.pci-0000_01_00.1.hdmi-stereo-extra1/#0: GP107GL High Definition Audio Controller Digital Stereo (HDMI 2)
        sources:
                alsa_output.pci-0000_01_00.1.hdmi-stereo-extra1.monitor/#0: Monitor of GP107GL High Definition Audio Controller Digital Stereo (HDMI 2)
        ports:
                hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "video-display"
                hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: yes)
                        properties:
                                device.icon_name = "video-display"
                                device.product.name = "Medion HDMI
 "
                hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "video-display"
                hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "video-display"
                hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "video-display"
                hdmi-output-5: HDMI / DisplayPort 6 (priority 5400, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "video-display"
    index: 1
        name: <alsa_card.pci-0000_00_1b.0>
        driver: <module-alsa-card.c>
        owner module: 7
        properties:
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xf7110000 irq 29"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1b.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "1e20"
                device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "0"
                device.description = "Built-in Audio"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        profiles:
                input:analog-stereo: Analog Stereo Input (priority 65, available: no)
                output:analog-stereo: Analog Stereo Output (priority 39268, available: unknown)
                output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
                output:analog-surround-21: Analog Surround 2.1 Output (priority 1300, available: no)
                output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (priority 1365, available: no)
                output:analog-surround-40: Analog Surround 4.0 Output (priority 1200, available: no)
                output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (priority 1265, available: no)
                output:analog-surround-41: Analog Surround 4.1 Output (priority 1300, available: no)
                output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (priority 1365, available: no)
                output:analog-surround-50: Analog Surround 5.0 Output (priority 1200, available: no)
                output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (priority 1265, available: no)
                output:analog-surround-51: Analog Surround 5.1 Output (priority 1300, available: no)
                output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (priority 1365, available: no)
                output:iec958-stereo: Digital Stereo (IEC958) Output (priority 38268, available: unknown)
                output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 5565, available: unknown)
                off: Off (priority 0, available: unknown)
        active profile: <output:analog-stereo>
        sinks:
                alsa_output.pci-0000_00_1b.0.analog-stereo/#1: Built-in Audio Analog Stereo
        sources:
                alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#1: Monitor of Built-in Audio Analog Stereo
        ports:
                analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "audio-input-microphone"
                analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "audio-input-microphone"
                analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
                        properties:

                analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: no)
                        properties:

                analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: yes)
                        properties:
                                device.icon_name = "audio-headphones"
                iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
                        properties:

    index: 2
        name: <alsa_card.usb-mvsilicon_USB_MIC_Device_mvsilicon20200924-00>
        driver: <module-alsa-card.c>
        owner module: 23
        properties:
                alsa.card = "2"
                alsa.card_name = "USB MIC Device"
                alsa.long_card_name = "mvsilicon USB MIC Device at usb-0000:00:1a.0-1.5, full speed"
                alsa.driver_name = "snd_usb_audio"
                device.bus_path = "pci-0000:00:1a.0-usb-0:1.5:1.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/sound/card2"
                udev.id = "usb-mvsilicon_USB_MIC_Device_mvsilicon20200924-00"
                device.bus = "usb"
                device.vendor.id = "aa98"
                device.vendor.name = "mvsilicon"
                device.product.id = "1234"
                device.product.name = "USB MIC Device"
                device.serial = "mvsilicon_USB_MIC_Device_mvsilicon20200924"
                device.string = "2"
                device.description = "USB MIC Device"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-usb"
        profiles:
                input:mono-fallback: Mono Input (priority 1, available: unknown)
                off: Off (priority 0, available: unknown)
        active profile: <input:mono-fallback>
        sources:
                alsa_input.usb-mvsilicon_USB_MIC_Device_mvsilicon20200924-00.mono-fallback/#2: USB MIC Device Mono
        ports:
                analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-input-microphone"

output for pacmd list-sources

3 source(s) available.
    index: 0
        name: <alsa_output.pci-0000_01_00.1.hdmi-stereo-extra1.monitor>
        driver: <module-alsa-card.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 1030
        volume: front-left: 1552 /   2% / -97.54 dB,   front-right: 1552 /   2% / -97.54 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: yes
        current latency: 0.00 ms
        max rewind: 0 KiB
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
        monitor_of: 0
        card: 0 <alsa_card.pci-0000_01_00.1>
        module: 6
        properties:
                device.description = "Monitor of GP107GL High Definition Audio Controller Digital Stereo (HDMI 2)"
                device.class = "monitor"
                alsa.card = "1"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 17"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:01:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "0fb9"
                device.product.name = "GP107GL High Definition Audio Controller"
                device.string = "1"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
    index: 1
        name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
        driver: <module-alsa-card.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 1030
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max rewind: 0 KiB
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
        monitor_of: 1
        card: 1 <alsa_card.pci-0000_00_1b.0>
        module: 7
        properties:
                device.description = "Monitor of Built-in Audio Analog Stereo"
                device.class = "monitor"
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xf7110000 irq 29"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1b.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "1e20"
                device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "0"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
  * index: 2
        name: <alsa_input.usb-mvsilicon_USB_MIC_Device_mvsilicon20200924-00.mono-fallback>
        driver: <module-alsa-card.c>
        flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 9040
        volume: mono: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 35466 /  54% / -16.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max rewind: 0 KiB
        sample spec: s24le 1ch 44100Hz
        channel map: mono
                     Mono
        used by: 0
        linked by: 0
        configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
        card: 2 <alsa_card.usb-mvsilicon_USB_MIC_Device_mvsilicon20200924-00>
        module: 23
        properties:
                alsa.resolution_bits = "24"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "USB Audio"
                alsa.id = "USB Audio"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "2"
                alsa.card_name = "USB MIC Device"
                alsa.long_card_name = "mvsilicon USB MIC Device at usb-0000:00:1a.0-1.5, full speed"
                alsa.driver_name = "snd_usb_audio"
                device.bus_path = "pci-0000:00:1a.0-usb-0:1.5:1.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/sound/card2"
                udev.id = "usb-mvsilicon_USB_MIC_Device_mvsilicon20200924-00"
                device.bus = "usb"
                device.vendor.id = "aa98"
                device.vendor.name = "mvsilicon"
                device.product.id = "1234"
                device.product.name = "USB MIC Device"
                device.serial = "mvsilicon_USB_MIC_Device_mvsilicon20200924"
                device.string = "hw:2"
                device.buffering.buffer_size = "264600"
                device.buffering.fragment_size = "132300"
                device.access_mode = "mmap+timer"
                device.profile.name = "mono-fallback"
                device.profile.description = "Mono"
                device.description = "USB MIC Device Mono"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-usb"
        ports:
                analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-input-microphone"
        active port: <analog-input-mic>

Last edited by JuanDeag (2022-01-03 16:28:12)

V1del · 2022-01-03 16:17:12

Read the link I posted and fix your posts

JuanDeag · 2022-01-03 16:29:38

 output from sudo fuser -v /dev/snd/*: USER        PID ACCESS COMMAND
/dev/snd/controlC0:  jb          724 F.... pulseaudio
/dev/snd/controlC1:  jb          724 F.... pulseaudio
/dev/snd/controlC2:  jb          583 F.... kded5
                     jb          724 F.... pulseaudio
                     jb          725 F.... kmix
/dev/snd/pcmC0D0p:   jb          724 F...m pulseaudio

V1del · 2022-01-03 16:35:44

Thanks, all looks pretty normal, what are you actually using to test whether your mic works? If you do a

parecord -d alsa_input.usb-mvsilicon_USB_MIC_Device_mvsilicon20200924-00.mono-fallback --file-format=wav test.wav

do you not get any output in the resulting file? Have you made sure it isn't accidentally muted in HW? E.g. a mute button somewhere directly on the mic or so?

JuanDeag · 2022-01-03 16:47:41

I use obs and discord to test the audio and I get no output from that file. I've made sure there's no HW mute. I also get no audio in obs and discord.

V1del · 2022-01-03 17:15:54

Mhm, there are a few USB errors though they should be for an unrelated integrated camera, but maybe there's a problem with your USB bus, have you tried a different port? What output do you get if you plug out and run a

sudo dmesg -W

and then plug the mic?

JuanDeag · 2022-01-03 17:25:35

I unplugged both my webcam and my microphone, then I ran the command and plugged only my microphone in

 sudo dmesg -W
[  247.592607] usb 2-1.6: new full-speed USB device number 4 using ehci-pci
[  247.691610] usb 2-1.6: New USB device found, idVendor=aa98, idProduct=1234, bcdDevice= 1.00
[  247.691618] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  247.691621] usb 2-1.6: Product: USB MIC Device
[  247.691624] usb 2-1.6: Manufacturer: mvsilicon
[  247.691626] usb 2-1.6: SerialNumber: mvsilicon20200924
[  252.762564] usb 2-1.6: 1:1: cannot get freq at ep 0x83
[  257.883172] usb 2-1.6: Warning! Unlikely big volume range (=4096), cval->res is probably wrong.
[  257.883180] usb 2-1.6: [5] FU [Mic Capture Volume] ch = 2, val = 0/4096/1
[  263.004734] input: mvsilicon USB MIC Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.2/0003:AA98:1234.0008/input/input27
[  263.059661] hid-generic 0003:AA98:1234.0008: input,hidraw2: USB HID v2.01 Device [mvsilicon USB MIC Device] on usb-0000:00:1d.0-1.6/input2
[  263.059724] usbhid 2-1.6:1.3: couldn't find an input interrupt endpoint
[  273.455682] usb 2-1.6: 1:1: cannot get freq at ep 0x83
[  278.576028] usb 2-1.6: 1:1: cannot get freq at ep 0x83
[  278.584851] usb 2-1.6: cannot submit urb 0, error -28: not enough bandwidth
[  293.805416] usb 2-1.6: cannot submit urb 0, error -28: not enough bandwidth

V1del · 2022-01-03 17:28:45

not enough bandwith means you aren't getting the power you should be getting. Are you connecting to an external hub? It's weird that ehci is the used driver in the first place, what's the situation here? Output of

lsusb -t

from usbutils? You need to ensure you're at least connected to a USB 2.0 hub for most mic usb purposes.

Last edited by V1del (2022-01-03 17:29:46)

JuanDeag · 2022-01-03 17:42:57

I connected the microphone to my usb 3.0 port instead of the 2.0 and it works fine now. Thank you for your help for finding the issue.

V1del · 2022-01-03 19:15:22

Right, normally 2.0 should suffice but you might have a lot of other devices on that sucking up the bandwidth. If this is [SOLVED] please mark it as such by editing the title in your first post: https://wiki.archlinux.org/title/Genera … ow_to_post

Arch Linux

#1 2022-01-03 15:48:13

[SOLVED] Usb microphone is not working

#2 2022-01-03 15:57:09

Re: [SOLVED] Usb microphone is not working

#3 2022-01-03 16:05:32

Re: [SOLVED] Usb microphone is not working

#4 2022-01-03 16:11:22

Re: [SOLVED] Usb microphone is not working

#5 2022-01-03 16:14:20

Re: [SOLVED] Usb microphone is not working

#6 2022-01-03 16:17:12

Re: [SOLVED] Usb microphone is not working

#7 2022-01-03 16:29:38

Re: [SOLVED] Usb microphone is not working

#8 2022-01-03 16:35:44

Re: [SOLVED] Usb microphone is not working

#9 2022-01-03 16:47:41

Re: [SOLVED] Usb microphone is not working

#10 2022-01-03 17:15:54

Re: [SOLVED] Usb microphone is not working

#11 2022-01-03 17:25:35

Re: [SOLVED] Usb microphone is not working

#12 2022-01-03 17:28:45

Re: [SOLVED] Usb microphone is not working

#13 2022-01-03 17:42:57

Re: [SOLVED] Usb microphone is not working

#14 2022-01-03 19:15:22

Re: [SOLVED] Usb microphone is not working

Board footer