You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2022-01-09 09:26:48
- vanillamilkk
- Member
- Registered: 2021-03-11
- Posts: 14
failed command: READ FPDMA QUEUED
is my SSD broken?
[ 48.357132] sd 4:0:0:0: [sdc] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=1s
[ 48.357139] sd 4:0:0:0: [sdc] tag#12 Sense Key : Medium Error [current]
[ 48.357141] sd 4:0:0:0: [sdc] tag#12 Add. Sense: Unrecovered read error - auto reallocate failed
[ 48.357143] sd 4:0:0:0: [sdc] tag#12 CDB: Read(10) 28 00 0d 54 03 80 00 00 20 00
[ 48.357144] blk_update_request: I/O error, dev sdc, sector 223609728 op 0x0:(READ) flags 0x1000 phys_seg 1 prio class 0
[ 48.357150] BTRFS error (device sdc1): bdev /dev/sdc1 errs: wr 0, rd 12, flush 0, corrupt 14, gen 0
[ 48.357171] ata5: EH complete
[ 49.409396] ata5.00: exception Emask 0x0 SAct 0x4000000 SErr 0x0 action 0x0
[ 49.409402] ata5.00: irq_stat 0x40000008
[ 49.409404] ata5.00: failed command: READ FPDMA QUEUED
[ 49.409405] ata5.00: cmd 60/20:d0:80:03:54/00:00:0d:00:00/40 tag 26 ncq dma 16384 in
res 51/40:a0:00:00:00/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[ 49.409409] ata5.00: status: { DRDY ERR }
[ 49.409411] ata5.00: error: { UNC }
[ 49.490832] ata5.00: configured for UDMA/133
[ 49.490858] sd 4:0:0:0: [sdc] tag#26 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=1s
[ 49.490860] sd 4:0:0:0: [sdc] tag#26 Sense Key : Medium Error [current]
[ 49.490862] sd 4:0:0:0: [sdc] tag#26 Add. Sense: Unrecovered read error - auto reallocate failed
[ 49.490864] sd 4:0:0:0: [sdc] tag#26 CDB: Read(10) 28 00 0d 54 03 80 00 00 20 00
[ 49.490871] blk_update_request: I/O error, dev sdc, sector 223609728 op 0x0:(READ) flags 0x1000 phys_seg 1 prio class 0
[ 49.490878] BTRFS error (device sdc1): bdev /dev/sdc1 errs: wr 0, rd 13, flush 0, corrupt 14, gen 0
[ 49.490905] ata5: EH complete
[ 50.541214] ata5.00: exception Emask 0x0 SAct 0x2000 SErr 0x0 action 0x0
[ 50.541220] ata5.00: irq_stat 0x40000008
[ 50.541223] ata5.00: failed command: READ FPDMA QUEUED
[ 50.541224] ata5.00: cmd 60/20:68:80:03:54/00:00:0d:00:00/40 tag 13 ncq dma 16384 in
res 51/40:a0:00:00:00/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[ 50.541230] ata5.00: status: { DRDY ERR }
[ 50.541231] ata5.00: error: { UNC }
[ 50.622405] ata5.00: configured for UDMA/133
[ 50.622420] sd 4:0:0:0: [sdc] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=1s
[ 50.622422] sd 4:0:0:0: [sdc] tag#13 Sense Key : Medium Error [current]
[ 50.622424] sd 4:0:0:0: [sdc] tag#13 Add. Sense: Unrecovered read error - auto reallocate failed
[ 50.622426] sd 4:0:0:0: [sdc] tag#13 CDB: Read(10) 28 00 0d 54 03 80 00 00 20 00
[ 50.622427] blk_update_request: I/O error, dev sdc, sector 223609728 op 0x0:(READ) flags 0x1000 phys_seg 1 prio class 0
[ 50.622434] BTRFS error (device sdc1): bdev /dev/sdc1 errs: wr 0, rd 14, flush 0, corrupt 14, gen 0
[ 50.622451] ata5: EH completesmartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.13-zen1-1-zen] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Silicon Motion based SSDs
Device Model: ADATA SU650
LU WWN Device Id: 0 000000 000000000
Firmware Version: V8X02c08
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jan 9 16:13:14 2022 WIB
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1) seconds.
Offline data collection
capabilities: (0x59) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 3) minutes.
Extended self-test routine
recommended polling time: ( 11) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 2659
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 501
161 Valid_Spare_Block_Cnt 0x0032 100 100 000 Old_age Always - 24
162 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 203393
163 Initial_Bad_Block_Count 0x0032 100 100 000 Old_age Always - 100
164 Total_Erase_Count 0x0032 100 100 000 Old_age Always - 527
166 Min_Erase_Count 0x0032 100 100 000 Old_age Always - 81
167 Average_Erase_Count 0x0032 100 100 050 Old_age Always - 0
168 Max_Erase_Count_of_Spec 0x0032 100 100 000 Old_age Always - 0
169 Remaining_Lifetime_Perc 0x0032 100 100 000 Old_age Always - 100
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 2
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 79
175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0
181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 267966
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 100 100 030 Old_age Always - 53
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 2201
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
206 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 127
207 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 730
232 Available_Reservd_Space 0x0032 100 100 000 Old_age Always - 92
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 305
241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 3462
242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 3448
249 Unkn_SiliconMotion_Attr 0x0032 100 100 000 Old_age Always - 13309
250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 9862
SMART Error Log Version: 1
Warning: ATA error count 293 inconsistent with error log pointer 5
ATA Error Count: 293 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 293 occurred at disk power-on lifetime: 2650 hours (110 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 68 0a 49 40 Error: UNC at LBA = 0x00490a68 = 4786792
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 20 20 5c f4 ea 08 01:01:46.258 READ DMA
c8 00 08 68 10 68 eb 08 01:01:45.262 READ DMA
ef 10 02 00 00 00 a0 08 01:01:45.247 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 08 01:01:45.247 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 01:01:45.213 SET FEATURES [Set transfer mode]
Error 292 occurred at disk power-on lifetime: 2650 hours (110 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 68 0a 49 40 Error: UNC at LBA = 0x00490a68 = 4786792
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 20 20 5c f4 ea 08 01:01:45.127 READ DMA
c8 00 08 70 10 68 eb 08 01:01:44.128 READ DMA
ef 10 02 00 00 00 a0 08 01:01:44.114 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 08 01:01:44.114 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 01:01:44.080 SET FEATURES [Set transfer mode]
Error 291 occurred at disk power-on lifetime: 2650 hours (110 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 68 0a 49 40 Error: UNC at LBA = 0x00490a68 = 4786792
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 20 20 5c f4 ea 08 01:01:43.998 READ DMA
c8 00 08 70 10 68 eb 08 01:01:42.992 READ DMA
ef 10 02 00 00 00 a0 08 01:01:42.977 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 08 01:01:42.977 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 01:01:42.943 SET FEATURES [Set transfer mode]
Error 290 occurred at disk power-on lifetime: 2650 hours (110 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 68 0a 49 40 Error: UNC at LBA = 0x00490a68 = 4786792
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 20 20 5c f4 ea 08 01:01:42.866 READ DMA
c8 00 08 e0 ce f0 e5 08 01:01:41.874 READ DMA
c8 00 30 b0 ce f0 e5 08 01:01:41.873 READ DMA
c8 00 50 60 ce f0 e5 08 01:01:41.872 READ DMA
c8 00 08 00 94 f1 e5 08 01:01:41.871 READ DMA
Error 289 occurred at disk power-on lifetime: 2650 hours (110 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 68 0a 49 40 Error: UNC at LBA = 0x00490a68 = 4786792
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 20 20 5c f4 ea 08 01:01:41.340 READ DMA
c8 00 40 78 10 68 eb 08 01:01:40.321 READ DMA
ef 10 02 00 00 00 a0 08 01:01:40.305 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 08 01:01:40.305 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 01:01:40.271 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.i bought this SSD around a year ago, i don't think this is broken yet? but i don't know how to read the smartctl output
the symptom is everything is super super slow (even terminal take 2 minute to load .bashrc)
is there anything i can do to make this PC usable for at least 1-2 weeks (im really short on money)
all the data is safely backed up to cloud, but i need the pc for school
Last edited by vanillamilkk (2022-01-10 11:20:26)
Offline
#2 2022-01-15 11:45:26
- menelkir
- Member
- Registered: 2014-06-15
- Posts: 15
Re: failed command: READ FPDMA QUEUED
Try linux-lts. I suspect this is an issue with linux and linux-zen.
Offline
Pages: 1