You are not logged in.
Pages: 1
I downloaded the latest release of the Zenburn color scheme for Vim, hoping that I could use it in my terminal as well, but it doesn't work...the colors fall back to the default colors. I'm using rxvt-unicode, and I assume it has 256 color support, but I'm not sure. :?
Does anybody else use this combination successfully (urxvt+vim+zenburn)? I'm kind of lost here...
Offline
yes, i do. but i had the same prob as you(worked in gvim but not vim) and if i recall correctly it was because one of the config files were overwriting the other or something like that. See if you have a ~/.gvimrc for example, and a ~/.vimrc .. so try deleting/making/changing the config files(maybe in etc too). Sorry i can't be more specific
KISS = "It can scarcely be denied that the supreme goal of all theory is to make the irreducible basic elements as simple and as few as possible without having to surrender the adequate representation of a single datum of experience." - Albert Einstein
Offline
IIRC, vim reads ~/.vimrc. gvim reads .vimrc and then .gvimrc.
Therefore, make sure your colour scheme config is in .vimrc and it should then work for vim and gvim.
Offline
If gvim reads .vimrc then .gvimrc, then the color setting in .gvimrc over rides the one in .vimrc.
Offline
I have both ~/.vimrc and ~/.gvimrc set to zenburn. When I make changes to the .vimrc file with other colors, such as desert256, it works fine. And gvim accepts the scheme perfectly. So, the files seem ok.
Any other ideas....maybe something I can test? For now, I will take a look at the system-wide config...maybe something in there needs changing. Blah, who knows.
Offline
it's always possible zenburn just fails in non-gui mode. This is typical alot of the time. Check the color definition and see if it sets ctermfg and ctermbg.
Offline
Here is the zenburn.vim file...others with more experience can find any problems much better than I can.
" Vim color file
" Maintainer: Jani Nurminen <jani>
" Last Change: $Id: zenburn.vim,v 1.15 2006/09/07 15:57:46 jnurmine Exp $
" URL: http://slinky.imukuppi.org/zenburn/
" License: GPL
"
" Nothing too fancy, just some alien fruit salad to keep you in the zone.
" This syntax file was designed to be used with dark environments and
" low light situations. Of course, if it works during a daybright office, go
" ahead :)
"
" Owes heavily to other Vim color files! With special mentions
" to "BlackDust", "Camo" and "Desert".
"
" To install, copy to ~/.vim/colors directory. Then :colorscheme zenburn.
" See also :help syntax
"
" Credits:
" - Jani Nurminen - original Zenburn
" - Steve Hall & Cream posse - higher-contrast Visual selection
" - Kurt Maier - 256 color console coloring, low and high contrast toggle,
" bug fixing
"
" CONFIGURABLE PARAMETERS:
"
" You can use the default (don't set any parameters), or you can
" set some parameters to tweak the Zenburn colours.
"
" * You can now set a darker background for bright environments. To activate, use:
" contrast Zenburn, use:
"
" let g:zenburn_high_Contrast = 1
"
" * To get more contrast to the Visual selection, use
"
" let g:zenburn_alternate_Visual = 1
"
" * To use alternate colouring for Error message, use
"
" let g:zenburn_alternate_Error = 1
"
" * The new default for Include is a duller orange. To use the original
" colouring for Include, use
"
" let g:zenburn_alternate_Include = 1
"
" * To turn the parameter(s) back to defaults, use UNLET:
"
" unlet g:zenburn_alternate_Include
"
" Setting to 0 won't work!
"
" That's it, enjoy!
"
" TODO
" - Visual alternate color is broken? Try GVim >= 7.0.66 if you have trouble
" - IME colouring (CursorIM)
" - obscure syntax groups: check and colourize
" - add more groups if necessary
set background=dark
hi clear
if exists("syntax_on")
syntax reset
endif
let g:colors_name="zenburn"
hi Boolean guifg=#dca3a3
hi Character guifg=#dca3a3 gui=bold
hi Comment guifg=#7f9f7f gui=italic
hi Conditional guifg=#f0dfaf gui=bold
hi Constant guifg=#dca3a3 gui=bold
hi Cursor guifg=#000d18 guibg=#8faf9f gui=bold
hi Debug guifg=#bca3a3 gui=bold
hi Define guifg=#ffcfaf gui=bold
hi Delimiter guifg=#8f8f8f
hi DiffAdd guifg=#709080 guibg=#313c36 gui=bold
hi DiffChange guibg=#333333
hi DiffDelete guifg=#333333 guibg=#464646
hi DiffText guifg=#ecbcbc guibg=#41363c gui=bold
hi Directory guifg=#dcdccc gui=bold
hi ErrorMsg guifg=#80d4aa guibg=#2f2f2f gui=bold
hi Exception guifg=#c3bf9f gui=bold
hi Float guifg=#c0bed1
hi FoldColumn guifg=#93b3a3 guibg=#3f4040
hi Folded guifg=#93b3a3 guibg=#3f4040
hi Function guifg=#efef8f
hi Identifier guifg=#efdcbc
hi IncSearch guibg=#f8f893 guifg=#385f38
hi Keyword guifg=#f0dfaf gui=bold
hi Label guifg=#dfcfaf gui=underline
hi LineNr guifg=#9fafaf guibg=#262626
hi Macro guifg=#ffcfaf gui=bold
hi ModeMsg guifg=#ffcfaf gui=none
hi MoreMsg guifg=#ffffff gui=bold
hi NonText guifg=#404040
hi Number guifg=#8cd0d3
hi Operator guifg=#f0efd0
hi PreCondit guifg=#dfaf8f gui=bold
hi PreProc guifg=#ffcfaf gui=bold
hi Question guifg=#ffffff gui=bold
hi Repeat guifg=#ffd7a7 gui=bold
hi Search guifg=#ffffe0 guibg=#284f28
hi SpecialChar guifg=#dca3a3 gui=bold
hi SpecialComment guifg=#82a282 gui=bold
hi Special guifg=#cfbfaf
hi SpecialKey guifg=#9ece9e
hi Statement guifg=#e3ceab gui=none
hi StatusLine guifg=#2e4340 guibg=#ccdc90
hi StatusLineNC guifg=#2e3330 guibg=#88b090
hi StorageClass guifg=#c3bf9f gui=bold
hi String guifg=#cc9393
hi Structure guifg=#efefaf gui=bold
hi Tag guifg=#e89393 gui=bold
hi Title guifg=#efefef gui=bold
hi Todo guifg=#dfdfdf guibg=bg gui=bold
hi Typedef guifg=#dfe4cf gui=bold
hi Type guifg=#dfdfbf gui=bold
hi Underlined guifg=#dcdccc gui=underline
hi VertSplit guifg=#303030 guibg=#688060
hi VisualNOS guifg=#333333 guibg=#f18c96 gui=bold,underline
hi WarningMsg guifg=#ffffff guibg=#333333 gui=bold
hi WildMenu guibg=#2c302d guifg=#cbecd0 gui=underline
" Entering Kurt zone
if &t_Co > 255
hi Boolean ctermfg=181
hi Character ctermfg=181 cterm=bold
hi Comment ctermfg=108
hi Conditional ctermfg=223 cterm=bold
hi Constant ctermfg=181 cterm=bold
hi Cursor ctermfg=233 ctermbg=109 cterm=bold
hi Debug ctermfg=181 cterm=bold
hi Define ctermfg=223 cterm=bold
hi Delimiter ctermfg=245
hi DiffAdd ctermfg=66 ctermbg=237 cterm=bold
hi DiffChange ctermbg=236
hi DiffDelete ctermfg=236 ctermbg=238
hi DiffText ctermfg=217 ctermbg=237 cterm=bold
hi Directory ctermfg=188 cterm=bold
hi ErrorMsg ctermfg=115 ctermbg=236 cterm=bold
hi Exception ctermfg=249 cterm=bold
hi Float ctermfg=251
hi FoldColumn ctermfg=109 ctermbg=238
hi Folded ctermfg=109 ctermbg=238
hi Function ctermfg=228
hi Identifier ctermfg=223
hi IncSearch ctermbg=228 ctermfg=238
hi Keyword ctermfg=223 cterm=bold
hi Label ctermfg=187 cterm=underline
hi LineNr ctermfg=248 ctermbg=235
hi Macro ctermfg=223 cterm=bold
hi ModeMsg ctermfg=223 cterm=none
hi MoreMsg ctermfg=15 cterm=bold
hi NonText ctermfg=238
hi Number ctermfg=116
hi Operator ctermfg=230
hi PreCondit ctermfg=180 cterm=bold
hi PreProc ctermfg=223 cterm=bold
hi Question ctermfg=15 cterm=bold
hi Repeat ctermfg=223 cterm=bold
hi Search ctermfg=230 ctermbg=236
hi SpecialChar ctermfg=181 cterm=bold
hi SpecialComment ctermfg=108 cterm=bold
hi Special ctermfg=181
hi SpecialKey ctermfg=151
hi Statement ctermfg=187 ctermbg=234 cterm=none
hi StatusLine ctermfg=237 ctermbg=186
hi StatusLineNC ctermfg=236 ctermbg=108
hi StorageClass ctermfg=249 cterm=bold
hi String ctermfg=174
hi Structure ctermfg=229 cterm=bold
hi Tag ctermfg=181 cterm=bold
hi Title ctermfg=7 ctermbg=234 cterm=bold
hi Todo ctermfg=108 ctermbg=234 cterm=bold
hi Typedef ctermfg=253 cterm=bold
hi Type ctermfg=187 cterm=bold
hi Underlined ctermfg=188 ctermbg=234 cterm=bold
hi VertSplit ctermfg=236 ctermbg=65
hi VisualNOS ctermfg=236 ctermbg=210 cterm=bold
hi WarningMsg ctermfg=15 ctermbg=236 cterm=bold
hi WildMenu ctermbg=236 ctermfg=194 cterm=bold
if exists("g:zenburn_high_Contrast")
hi Normal ctermfg=188 ctermbg=234
else
hi Normal ctermfg=188 ctermbg=237
hi Cursor ctermbg=109
hi diffadd ctermbg=237
hi diffdelete ctermbg=238
hi difftext ctermbg=237
hi errormsg ctermbg=237
hi foldcolumn ctermbg=238
hi folded ctermbg=238
hi incsearch ctermbg=228
hi linenr ctermbg=238
hi search ctermbg=238
hi statement ctermbg=237
hi statusline ctermbg=144
hi statuslinenc ctermbg=108
hi title ctermbg=237
hi todo ctermbg=237
hi underlined ctermbg=237
hi vertsplit ctermbg=65
hi visualnos ctermbg=210
hi warningmsg ctermbg=236
hi wildmenu ctermbg=236
endif
endif
if exists("g:zenburn_high_Contrast")
" use new darker background
hi Normal guifg=#dcdccc guibg=#1f1f1f
else
" Original, lighter background
hi Normal guifg=#dcdccc guibg=#3f3f3f
endif
if exists("g:zenburn_alternate_Visual")
" Visual with more contrast, thanks to Steve Hall & Cream posse
" gui=none fixes weird highlight problem in at least GVim 7.0.66, thanks to Kurt Maier
hi Visual guifg=#000000 guibg=#71d3b4 gui=none
hi VisualNOS guifg=#000000 guibg=#71d3b4 gui=none
else
" use default visual
hi Visual guifg=#233323 guibg=#71d3b4 gui=none
hi VisualNOS guifg=#233323 guibg=#71d3b4 gui=none
endif
if exists("g:zenburn_alternate_Error")
" use a bit different Error
hi Error guifg=#ef9f9f guibg=#201010 gui=bold
else
" default
hi Error guifg=#e37170 guibg=#332323 gui=none
endif
if exists("g:zenburn_alternate_Include")
" original setting
hi Include guifg=#ffcfaf gui=bold
else
" new, less contrasted one
hi Include guifg=#dfaf8f gui=bold
endif
" TODO check every syntax group that they're ok
Offline
I've just tried playing around. Zenburn is written for gvim. You can see that with the guifg/guibg commands.
As you can see, Kurt adding cterm* commands for consoles like xterm which support 256 colours. However, it seems that consoles behave differently (I'm using konsole which requires its own schema file to work properly with vim+zenburn). I don't really know what to advise.
Just use desert for now!
Offline
Like I said, you need to check for ctermfg and ctermbg. These *are* set, however, they are in an "if" block. You can easilly find out what t_Co is through vim's extensive help, but I will give you a hint. It is the number of colors a terminal supports.
if &t_Co > 255
urxvt does not support that many colors. It supports 88.
Thus, zenburn does not work on an 88 color terminal.
Both desert256 and inkpot should work fine under 88 color terminals. The best you can hope for is to contact the author and ask them to provide an entry for 88 color terminals too.
Offline
See, I wouldn't have figured that out anytime soon...thanks for clearing it up. I guess I will use something else for now. Or I can use another terminal. Whatever, it isn't all that important.
Offline
See, I wouldn't have figured that out anytime soon...thanks for clearing it up. I guess I will use something else for now. Or I can use another terminal. Whatever, it isn't all that important.
I actually like inkpot in urxvt. It works nicely
Offline
I actually like inkpot in urxvt. It works nicely
I gave it a spin, but I just don't like that much orange Thanks though.
Offline
Pages: 1