Arch Linux

amaro

Member

From: xfce

Registered: 2014-05-09

Posts: 367

microSD Card UHS-I cannot mount

Hello everybody!

Few days ago bought new sdcard INTENSO microSD Card UHS-I class 10.
Had some trouble mounting it on Devuan system with the original fat32 so I made 4 partitions on it and formated the first two - fat32 and the other two - ext4.
Now the card works fine on Devuan.

Cannot mount it on Arch.

lspci -k | grep -i realtek
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)

Installed 'rts_bpp-dkms-git' as suggested here https://bbs.archlinux.org/viewtopic.php?pid=1879065 and here https://bbs.archlinux.org/viewtopic.php?id=254663
Still cannot mount it.

# dmesg | grep -i mmc
[    0.140878] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.140878] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    2.932092] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[  109.464171] mmc0: card never left busy state
[  109.464179] mmc0: error -110 whilst initialising SD card
[  109.951108] mmc0: cannot verify signal voltage switch
[  110.059260] mmc0: tuning execution failed: -22
[  110.059269] mmc0: error -22 whilst initialising SD card
[  110.545303] mmc0: cannot verify signal voltage switch
[  110.653082] mmc0: tuning execution failed: -22
[  110.653101] mmc0: error -22 whilst initialising SD card

Before installing 'rts_bpp-dkms-git' there was only 'error -22' in 'dmesg' output.

Any suggestions are appreciated!
Thank you in advance!

Head_on_a_Stick

Member

From: The Wirral

Registered: 2014-02-20

Posts: 9,003

Website

Re: microSD Card UHS-I cannot mount

Check 'lspci -k' in both Devuan and Arch to see which kernel driver is in use for the card reader.

---

Jin, Jîyan, Azadî