You are not logged in.

Pages: 1

#1 2022-05-01 18:59:00

tethys
Member
Registered: 2019-08-13
Posts: 102

Cannot make ffplay play videos full-screen

After today's update I noticed that I cannot toggle full-screen videos played with ffplay: when I press "f" the window becomes full screen but not the video, which remains the same size in the upper-left part of the full-screen window. Anybody can reproduce this? Any ideea why this happens? I use Gnome on Xorg.

Last edited by tethys (2022-05-02 16:01:26)

Offline

#2 2022-05-01 19:04:29

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 29,530
Website

Re: Cannot make ffplay play videos full-screen

Which update did you get "today".  There is a new ffmpeg in staging, but the last update to ffmpeg in the repos was almost a month ago to 2:5.0-6.

Last edited by Trilby (2022-05-01 19:04:46)

"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#3 2022-05-01 19:07:26

tethys
Member
Registered: 2019-08-13
Posts: 102

Re: Cannot make ffplay play videos full-screen

I am using ffmpeg-2:5.0-6 from one month ago, so I think that the problem has something to do with Gnome 42 update. I did not update for about two months.

Offline

#4 2022-05-01 19:24:20

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 29,530
Website

Re: Cannot make ffplay play videos full-screen

Post your pacman.log for this update.  You could try downgrading to the archlinuxarchive mirror to narrow down which package update triggered the issue.

"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#5 2022-05-01 19:45:47

tethys
Member
Registered: 2019-08-13
Posts: 102

Re: Cannot make ffplay play videos full-screen

pacman.log for this update:

[2022-05-01T18:18:21+0300] [PACMAN] Running 'pacman -Syu --ignore doublecmd-gtk2'
[2022-05-01T18:18:21+0300] [PACMAN] synchronizing package lists
[2022-05-01T18:18:21+0300] [PACMAN] starting full system upgrade
[2022-05-01T18:23:13+0300] [ALPM] running '60-mkinitcpio-remove.hook'...
[2022-05-01T18:23:13+0300] [ALPM] transaction started
[2022-05-01T18:23:13+0300] [ALPM] upgraded tzdata (2021e-1 -> 2022a-1)
[2022-05-01T18:23:13+0300] [ALPM] upgraded iana-etc (20220205-1 -> 20220427-1)
[2022-05-01T18:23:13+0300] [ALPM] upgraded glibc (2.35-2 -> 2.35-3)
[2022-05-01T18:23:13+0300] [ALPM-SCRIPTLET] Generating locales...
[2022-05-01T18:23:15+0300] [ALPM-SCRIPTLET]   de_CH.UTF-8... done
[2022-05-01T18:23:15+0300] [ALPM-SCRIPTLET] Generation complete.
[2022-05-01T18:23:15+0300] [ALPM] upgraded libffi (3.4.2-4 -> 3.4.2-5)
[2022-05-01T18:23:15+0300] [ALPM] upgraded util-linux-libs (2.37.4-1 -> 2.38-1)
[2022-05-01T18:23:15+0300] [ALPM] upgraded zlib (1:1.2.11-5 -> 1:1.2.12-2)
[2022-05-01T18:23:15+0300] [ALPM] upgraded libsysprof-capture (3.42.1-3 -> 3.44.0-1)
[2022-05-01T18:23:15+0300] [ALPM] upgraded gcc-libs (11.2.0-3 -> 11.2.0-4)
[2022-05-01T18:23:15+0300] [ALPM] upgraded ncurses (6.3-2 -> 6.3-3)
[2022-05-01T18:23:15+0300] [ALPM] upgraded glib2 (2.70.4-1 -> 2.72.1-1)
[2022-05-01T18:23:15+0300] [ALPM] upgraded expat (2.4.4-1 -> 2.4.8-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded openssl (1.1.1.m-1 -> 1.1.1.n-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded krb5 (1.19.2-2 -> 1.19.3-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded libcap-ng (0.8.2-7 -> 0.8.3-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded audit (3.0.7-1 -> 3.0.8-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded libxcrypt (4.4.28-1 -> 4.4.28-2)
[2022-05-01T18:23:16+0300] [ALPM] upgraded libcap (2.63-2 -> 2.64-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded libgpg-error (1.44-1 -> 1.45-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded libgcrypt (1.9.4-1 -> 1.10.1-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded xz (5.2.5-2 -> 5.2.5-3)
[2022-05-01T18:23:16+0300] [ALPM] upgraded zstd (1.5.2-2 -> 1.5.2-3)
[2022-05-01T18:23:16+0300] [ALPM] upgraded systemd-libs (250.3-4 -> 250.5-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded dbus (1.12.20-1 -> 1.14.0-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded kmod (29-2 -> 29-3)
[2022-05-01T18:23:16+0300] [ALPM] upgraded hwdata (0.356-1 -> 0.358-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded brotli (1.0.9-7 -> 1.0.9-8)
[2022-05-01T18:23:16+0300] [ALPM] upgraded libnghttp2 (1.46.0-1 -> 1.47.0-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded coreutils (9.0-2 -> 9.1-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded ca-certificates-mozilla (3.75-1 -> 3.77-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded curl (7.81.0-2 -> 7.83.0-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded libelf (0.186-5 -> 0.187-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded libseccomp (2.5.3-3 -> 2.5.4-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded util-linux (2.37.4-1 -> 2.38-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded json-c (0.15-3 -> 0.16-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded libmnl (1.0.4-3 -> 1.0.5-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded libnfnetlink (1.0.1-4 -> 1.0.2-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded libnetfilter_conntrack (1.0.8-1 -> 1.0.9-1)
[2022-05-01T18:23:16+0300] [ALPM] upgraded libnl (3.5.0-3 -> 3.6.0-3)
[2022-05-01T18:23:16+0300] [ALPM] upgraded systemd (250.3-4 -> 250.5-1)
[2022-05-01T18:23:17+0300] [ALPM] upgraded js78 (78.15.0-3 -> 78.15.0-4)
[2022-05-01T18:23:17+0300] [ALPM] upgraded polkit (0.120-4 -> 0.120-5)
[2022-05-01T18:23:17+0300] [ALPM] upgraded accountsservice (22.07.4-1 -> 22.08.8-2)
[2022-05-01T18:23:17+0300] [ALPM] upgraded libjpeg-turbo (2.1.2-1 -> 2.1.3-1)
[2022-05-01T18:23:17+0300] [ALPM] upgraded libtiff (4.3.0-1 -> 4.3.0-2)
[2022-05-01T18:23:17+0300] [ALPM] upgraded icu (70.1-1 -> 71.1-1)
[2022-05-01T18:23:17+0300] [ALPM] upgraded libxml2 (2.9.12-7 -> 2.9.13-2)
[2022-05-01T18:23:17+0300] [ALPM] upgraded shared-mime-info (2.0+115+gd74a913-1 -> 2.0+144+g13695c7-1)
[2022-05-01T18:23:17+0300] [ALPM] upgraded gdk-pixbuf2 (2.42.6-2 -> 2.42.8-1)
[2022-05-01T18:23:17+0300] [ALPM] upgraded harfbuzz (3.4.0-1 -> 4.2.1-1)
[2022-05-01T18:23:17+0300] [ALPM] upgraded freetype2 (2.11.1-1 -> 2.12.0-2)
[2022-05-01T18:23:17+0300] [ALPM] upgraded fontconfig (2:2.13.96-1 -> 2:2.14.0-1)
[2022-05-01T18:23:17+0300] [ALPM-SCRIPTLET] Rebuilding fontconfig cache...
[2022-05-01T18:23:19+0300] [ALPM] upgraded xorgproto (2021.5-1 -> 2022.1-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded libx11 (1.7.3.1-1 -> 1.7.5-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded cairo (1.17.4-5 -> 1.17.6-2)
[2022-05-01T18:23:20+0300] [ALPM] upgraded fribidi (1.0.11-1 -> 1.0.12-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded pango (1:1.50.4-1 -> 1:1.50.7-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded librsvg (2:2.52.6-1 -> 2:2.54.1-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded gtk-update-icon-cache (1:4.6.1-2 -> 1:4.6.3-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded adwaita-icon-theme (41.0-1 -> 42.0+r1+gc144c3d75-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded alsa-card-profiles (1:0.3.47-1 -> 1:0.3.51-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded at-spi2-core (2.42.0-1 -> 2.44.1-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded atk (2.36.0-1 -> 2.38.0-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded libepoxy (1.5.9-1 -> 1.5.10-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded graphene (1.10.6-1 -> 1.10.8-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded sqlite (3.37.2-1 -> 3.38.3-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded libstemmer (2.2.0-1 -> 2.2.0-2)
[2022-05-01T18:23:20+0300] [ALPM] upgraded json-glib (1.6.6-1 -> 1.6.6-2)
[2022-05-01T18:23:20+0300] [ALPM] upgraded gnutls (3.7.3-1 -> 3.7.4-2)
[2022-05-01T18:23:20+0300] [ALPM] upgraded gsettings-desktop-schemas (41.0-1 -> 42.0-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded glib-networking (1:2.70.1-1 -> 1:2.72.0-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded libsoup3 (3.0.4-2 -> 3.0.6-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded tracker3 (3.2.1-2 -> 3.3.0-2)
[2022-05-01T18:23:20+0300] [ALPM] upgraded wayland (1.20.0-1 -> 1.20.0-2)
[2022-05-01T18:23:20+0300] [ALPM] upgraded libxcursor (1.2.0-2 -> 1.2.1-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded gstreamer (1.20.0-2 -> 1.20.1-1)
[2022-05-01T18:23:20+0300] [ALPM] upgraded libgudev (237-1 -> 237-2)
[2022-05-01T18:23:21+0300] [ALPM] upgraded libdrm (2.4.109-1 -> 2.4.110-1)
[2022-05-01T18:23:21+0300] [ALPM] upgraded llvm-libs (13.0.1-1 -> 13.0.1-2)
[2022-05-01T18:23:21+0300] [ALPM] upgraded vulkan-icd-loader (1.2.203-1 -> 1.3.208-1)
[2022-05-01T18:23:21+0300] [ALPM] upgraded mesa (21.3.6-1 -> 22.0.2-1)
[2022-05-01T18:23:21+0300] [ALPM] upgraded gst-plugins-base-libs (1.20.0-2 -> 1.20.1-1)
[2022-05-01T18:23:21+0300] [ALPM] upgraded libusb (1.0.25-2 -> 1.0.26-1)
[2022-05-01T18:23:21+0300] [ALPM] upgraded gst-plugins-bad-libs (1.20.0-2 -> 1.20.1-1)
[2022-05-01T18:23:21+0300] [ALPM] upgraded desktop-file-utils (0.26-1 -> 0.26-2)
[2022-05-01T18:23:21+0300] [ALPM] upgraded gtk4 (1:4.6.1-2 -> 1:4.6.3-1)
[2022-05-01T18:23:21+0300] [ALPM] installed libadwaita (1:1.1.1-1)
[2022-05-01T18:23:21+0300] [ALPM] upgraded baobab (41.0-1 -> 42.0-1)
[2022-05-01T18:23:22+0300] [ALPM] upgraded binutils (2.38-3 -> 2.38-4)
[2022-05-01T18:23:22+0300] [ALPM] upgraded blas (3.10.0-1 -> 3.10.1-1)
[2022-05-01T18:23:22+0300] [ALPM] upgraded libical (3.0.14-1 -> 3.0.14-3)
[2022-05-01T18:23:22+0300] [ALPM] upgraded bluez (5.63-1 -> 5.64-2)
[2022-05-01T18:23:22+0300] [ALPM] upgraded bluez-libs (5.63-1 -> 5.64-2)
[2022-05-01T18:23:22+0300] [ALPM] upgraded boost-libs (1.78.0-1 -> 1.78.0-2)
[2022-05-01T18:23:22+0300] [ALPM] upgraded btrfs-progs (5.16.2-1 -> 5.17-1)
[2022-05-01T18:23:22+0300] [ALPM] upgraded bubblewrap (0.5.0-1 -> 0.6.1-1)
[2022-05-01T18:23:22+0300] [ALPM] upgraded cblas (3.10.0-1 -> 3.10.1-1)
[2022-05-01T18:23:22+0300] [ALPM] upgraded ldb (2:2.4.2-1 -> 2:2.5.0-1)
[2022-05-01T18:23:22+0300] [ALPM] upgraded python (3.10.2-1 -> 3.10.4-1)
[2022-05-01T18:23:22+0300] [ALPM] upgraded libbsd (0.11.5-1 -> 0.11.6-2)
[2022-05-01T18:23:22+0300] [ALPM] upgraded libarchive (3.6.0-1 -> 3.6.1-1)
[2022-05-01T18:23:22+0300] [ALPM] upgraded smbclient (4.15.5-1 -> 4.16.0-6)
[2022-05-01T18:23:22+0300] [ALPM] upgraded cifs-utils (6.14-1 -> 6.15-1)
[2022-05-01T18:23:22+0300] [ALPM] upgraded gtk3 (1:3.24.31-3 -> 1:3.24.33-3)
[2022-05-01T18:23:22+0300] [ALPM] upgraded cogl (1.22.8-1 -> 1.22.8-2)
[2022-05-01T18:23:23+0300] [ALPM] upgraded libevdev (1.12.0-1 -> 1.12.1-1)
[2022-05-01T18:23:23+0300] [ALPM] upgraded libwacom (2.1.0-1 -> 2.2.0-1)
[2022-05-01T18:23:23+0300] [ALPM] upgraded libinput (1.19.3-2 -> 1.20.1-1)
[2022-05-01T18:23:23+0300] [ALPM] upgraded clutter (1.26.4-1 -> 1.26.4-2)
[2022-05-01T18:23:23+0300] [ALPM] upgraded clutter-gst (3.0.27-3 -> 3.0.27-4)
[2022-05-01T18:23:23+0300] [ALPM] upgraded clutter-gtk (1.8.4-2 -> 1.8.4-3)
[2022-05-01T18:23:23+0300] [ALPM] upgraded libgusb (0.3.10-1 -> 0.3.10-2)
[2022-05-01T18:23:23+0300] [ALPM] upgraded colord-gtk-common (0.3.0-1 -> 0.3.0-2)
[2022-05-01T18:23:23+0300] [ALPM] upgraded colord-gtk (0.3.0-1 -> 0.3.0-2)
[2022-05-01T18:23:23+0300] [ALPM] upgraded enchant (2.3.2-1 -> 2.3.2-2)
[2022-05-01T18:23:23+0300] [ALPM] upgraded nspr (4.33-1 -> 4.33-2)
[2022-05-01T18:23:23+0300] [ALPM] upgraded nss (3.75-1 -> 3.77-1)
[2022-05-01T18:23:23+0300] [ALPM] upgraded poppler (22.02.0-2 -> 22.03.0-1)
[2022-05-01T18:23:23+0300] [ALPM] upgraded poppler-glib (22.02.0-2 -> 22.03.0-1)
[2022-05-01T18:23:23+0300] [ALPM] installed tpm2-tss (3.2.0-1)
[2022-05-01T18:23:23+0300] [ALPM] upgraded libsecret (0.20.4-1 -> 0.20.5-2)
[2022-05-01T18:23:23+0300] [ALPM] upgraded libsynctex (2021.59745-1 -> 2022.62885-1)
[2022-05-01T18:23:23+0300] [ALPM] installed gnome-desktop-common (1:42.1-1)
[2022-05-01T18:23:23+0300] [ALPM] upgraded gnome-desktop (1:41.3-1 -> 1:42.1-1)
[2022-05-01T18:23:23+0300] [ALPM] upgraded gspell (1.8.4-1 -> 1.10.0-1)
[2022-05-01T18:23:23+0300] [ALPM] upgraded libhandy (1.4.0-1 -> 1.6.2-1)
[2022-05-01T18:23:23+0300] [ALPM] upgraded libbluray (1.3.0-1 -> 1.3.0-2)
[2022-05-01T18:23:23+0300] [ALPM] upgraded openssh (8.8p1-1 -> 9.0p1-1)
[2022-05-01T18:23:23+0300] [ALPM] upgraded gcr (3.41.0-1 -> 3.41.0-2)
[2022-05-01T18:23:23+0300] [ALPM] upgraded parted (3.4-2 -> 3.5-1)
[2022-05-01T18:23:23+0300] [ALPM] upgraded gptfdisk (1.0.8-1 -> 1.0.9-1)
[2022-05-01T18:23:23+0300] [ALPM] upgraded mdadm (4.2-1 -> 4.2-2)
[2022-05-01T18:23:23+0300] [ALPM] upgraded libinih (53-1 -> 55-2)
[2022-05-01T18:23:23+0300] [ALPM] upgraded xfsprogs (5.14.2-1 -> 5.15.0-2)
[2022-05-01T18:23:23+0300] [ALPM] upgraded libaio (0.3.112-2 -> 0.3.113-1)
[2022-05-01T18:23:23+0300] [ALPM] upgraded gnupg (2.2.32-2 -> 2.2.35-1)
[2022-05-01T18:23:23+0300] [ALPM] upgraded gpgme (1.17.0-2 -> 1.17.1-1)
[2022-05-01T18:23:23+0300] [ALPM] upgraded gvfs (1.48.1-1 -> 1.50.1-1)
[2022-05-01T18:23:23+0300] [ALPM] upgraded ghostscript (9.55.0-4 -> 9.56.1-1)
[2022-05-01T18:23:24+0300] [ALPM] upgraded evince (41.3-1 -> 42.2-1)
[2022-05-01T18:23:24+0300] [ALPM] upgraded harfbuzz-icu (3.4.0-1 -> 4.2.1-1)
[2022-05-01T18:23:24+0300] [ALPM] upgraded libwpe (1.12.0-1 -> 1.12.0-2)
[2022-05-01T18:23:24+0300] [ALPM] upgraded wpebackend-fdo (1.12.0-1 -> 1.12.0-2)
[2022-05-01T18:23:24+0300] [ALPM] upgraded libnotify (0.7.9-2 -> 0.7.11-1)
[2022-05-01T18:23:24+0300] [ALPM] upgraded libmanette (0.2.6-2 -> 0.2.6-3)
[2022-05-01T18:23:24+0300] [ALPM] upgraded perl (5.34.0-3 -> 5.34.1-1)
[2022-05-01T18:23:24+0300] [ALPM] upgraded webkit2gtk (2.34.6-1 -> 2.36.1-1)
[2022-05-01T18:23:24+0300] [ALPM] upgraded gnome-online-accounts (3.40.1-1 -> 3.44.0-1)
[2022-05-01T18:23:24+0300] [ALPM] upgraded geocode-glib (3.26.2+r9+g6047da3-1 -> 3.26.2+r9+g6047da3-2)
[2022-05-01T18:23:24+0300] [ALPM] installed libgweather-4 (4.0.0-1)
[2022-05-01T18:23:24+0300] [ALPM] upgraded libgdata (0.18.1-1 -> 0.18.1-2)
[2022-05-01T18:23:24+0300] [ALPM] upgraded protobuf (3.19.4-1 -> 3.20.1-1)
[2022-05-01T18:23:24+0300] [ALPM] installed abseil-cpp (20211102.0-2)
[2022-05-01T18:23:24+0300] [ALPM] upgraded libphonenumber (8.12.41-1 -> 1:8.12.47-1)
[2022-05-01T18:23:24+0300] [ALPM] upgraded libvorbis (1.3.7-2 -> 1.3.7-3)
[2022-05-01T18:23:24+0300] [ALPM] upgraded libtool (2.4.6+59+gb55b1cc8-2 -> 2.4.7-1)
[2022-05-01T18:23:24+0300] [ALPM] upgraded flac (1.3.3-3 -> 1.3.4-2)
[2022-05-01T18:23:24+0300] [ALPM] upgraded libsndfile (1.0.31-1 -> 1.1.0-2)
[2022-05-01T18:23:24+0300] [ALPM] upgraded libpulse (15.0-1 -> 15.0-4)
[2022-05-01T18:23:25+0300] [ALPM] upgraded libcanberra (0.30+2+gc0620e4-5 -> 1:0.30+r2+gc0620e4-1)
[2022-05-01T18:23:25+0300] [ALPM] upgraded evolution-data-server (3.42.4-2 -> 3.44.1-1)
[2022-05-01T18:23:25+0300] [ALPM] upgraded libgsf (1.14.48-1 -> 1.14.49-1)
[2022-05-01T18:23:25+0300] [ALPM] upgraded libpst (0.6.76-5 -> 0.6.76-6)
[2022-05-01T18:23:25+0300] [ALPM] upgraded gnome-autoar (0.4.2-1 -> 0.4.3-2)
[2022-05-01T18:23:25+0300] [ALPM] installed cmark (0.30.2-1)
[2022-05-01T18:23:25+0300] [ALPM] upgraded evolution (3.42.4-1 -> 3.44.1-1)
[2022-05-01T18:23:25+0300] [ALPM] upgraded gettext (0.21-1 -> 0.21-2)
[2022-05-01T18:23:25+0300] [ALPM] upgraded exiv2 (0.27.5-1 -> 0.27.5-3)
[2022-05-01T18:23:25+0300] [ALPM] upgraded fakeroot (1.27-1 -> 1.28-1)
[2022-05-01T18:23:26+0300] [ALPM] upgraded jack2 (1.9.20-4 -> 1.9.21-1)
[2022-05-01T18:23:26+0300] [ALPM] upgraded libass (0.15.2-1 -> 0.15.2-2)
[2022-05-01T18:23:26+0300] [ALPM] upgraded libmfx (21.3.5-2 -> 22.3.0-1)
[2022-05-01T18:23:26+0300] [ALPM] upgraded rav1e (0.4.1-1 -> 0.4.1-2)
[2022-05-01T18:23:26+0300] [ALPM] upgraded libva (2.13.0-1 -> 2.14.0-1)
[2022-05-01T18:23:26+0300] [ALPM] upgraded libvdpau (1.4-1 -> 1.5-1)
[2022-05-01T18:23:26+0300] [ALPM] upgraded libvpx (1.11.0-1 -> 1.11.0-2)
[2022-05-01T18:23:26+0300] [ALPM] upgraded x264 (3:0.164.r3081.19856cc-1 -> 3:0.164.r3081.19856cc-2)
[2022-05-01T18:23:26+0300] [ALPM] upgraded x265 (3.5-1 -> 3.5-3)
[2022-05-01T18:23:26+0300] [ALPM] upgraded zimg (3.0.3-1 -> 3.0.3-2)
[2022-05-01T18:23:26+0300] [ALPM] upgraded libibus (1.5.25-5 -> 1.5.26-2)
[2022-05-01T18:23:26+0300] [ALPM] upgraded sdl2 (2.0.20-1 -> 2.0.22-1)
[2022-05-01T18:23:26+0300] [ALPM] upgraded svt-av1 (0.9.0-1 -> 0.9.0-2)
[2022-05-01T18:23:26+0300] [ALPM] upgraded vmaf (2.3.0-1 -> 2.3.1-1)
[2022-05-01T18:23:26+0300] [ALPM] upgraded ffmpeg (2:5.0-4 -> 2:5.0-6)
[2022-05-01T18:23:26+0300] [ALPM] upgraded ffmpeg4.4 (4.4.1-3 -> 4.4.1-4)
[2022-05-01T18:23:26+0300] [ALPM] upgraded zip (3.0-9 -> 3.0-10)
[2022-05-01T18:23:26+0300] [ALPM] upgraded file-roller (3.40.0-1 -> 3.42.0-1)
[2022-05-01T18:23:27+0300] [ALPM] upgraded firefox (97.0.1-1 -> 99.0.1-1)
[2022-05-01T18:23:27+0300] [ALPM] upgraded gobject-introspection-runtime (1.70.0-5 -> 1.72.0-1)
[2022-05-01T18:23:27+0300] [ALPM] installed js91 (91.8.0-1)
[2022-05-01T18:23:27+0300] [ALPM] upgraded gjs (2:1.70.1-2 -> 2:1.72.0-1)
[2022-05-01T18:23:27+0300] [ALPM] upgraded gsound (1.0.3-1 -> 1.0.3-2)
[2022-05-01T18:23:27+0300] [ALPM] upgraded pulseaudio (15.0-1 -> 15.0-4)
[2022-05-01T18:23:27+0300] [ALPM] upgraded pulseaudio-bluetooth (15.0-1 -> 15.0-4)
[2022-05-01T18:23:27+0300] [ALPM] upgraded upower (0.99.15-1 -> 0.99.17-1)
[2022-05-01T18:23:27+0300] [ALPM] installed gnome-bluetooth-3.0 (42.0-1)
[2022-05-01T18:23:27+0300] [ALPM] upgraded gnome-session (41.3-1 -> 42.0-1)
[2022-05-01T18:23:27+0300] [ALPM] upgraded libmm-glib (1.18.6-1 -> 1.18.8-1)
[2022-05-01T18:23:27+0300] [ALPM] upgraded geoclue (2.5.7-4 -> 2.6.0-2)
[2022-05-01T18:23:27+0300] [ALPM] upgraded libnm (1.34.0-1 -> 1.36.4-1)
[2022-05-01T18:23:28+0300] [ALPM] upgraded gnome-settings-daemon (41.0-2 -> 42.1-1)
[2022-05-01T18:23:28+0300] [ALPM] upgraded libgdm (41.3-2 -> 42.0+r11+g4a52f026-1)
[2022-05-01T18:23:28+0300] [ALPM] upgraded zenity (3.41.0-1 -> 3.42.1-1)
[2022-05-01T18:23:28+0300] [ALPM] upgraded pipewire (1:0.3.47-1 -> 1:0.3.51-1)
[2022-05-01T18:23:28+0300] [ALPM] installed xorg-xrandr (1.5.1-2)
[2022-05-01T18:23:28+0300] [ALPM] upgraded xorg-setxkbmap (1.3.2-2 -> 1.3.3-1)
[2022-05-01T18:23:28+0300] [ALPM] upgraded xorg-server-common (21.1.3-2 -> 21.1.3-6)
[2022-05-01T18:23:28+0300] [ALPM] upgraded xorg-xwayland (21.1.4-1 -> 22.1.1-1)
[2022-05-01T18:23:28+0300] [ALPM] upgraded mutter (41.4-1 -> 42.0-2)
[2022-05-01T18:23:28+0300] [ALPM] upgraded mobile-broadband-provider-info (20210805-1 -> 20220315-1)
[2022-05-01T18:23:28+0300] [ALPM] installed libnma-common (1.8.38-1)
[2022-05-01T18:23:28+0300] [ALPM] upgraded libnma (1.8.34-1 -> 1.8.38-1)
[2022-05-01T18:23:28+0300] [ALPM] upgraded gnome-disk-utility (41.0-1 -> 42.0-1)
[2022-05-01T18:23:28+0300] [ALPM] upgraded gst-plugin-pipewire (1:0.3.47-1 -> 1:0.3.51-1)
[2022-05-01T18:23:28+0300] [ALPM] upgraded gnome-shell (1:41.4-1 -> 1:42.0-1)
[2022-05-01T18:23:28+0300] [ALPM] upgraded xorg-server (21.1.3-2 -> 21.1.3-6)
[2022-05-01T18:23:28+0300] [ALPM] upgraded gdm (41.3-2 -> 42.0+r11+g4a52f026-1)
[2022-05-01T18:23:28+0300] [ALPM] upgraded gnome-backgrounds (41.0-1 -> 42.0-1)
[2022-05-01T18:23:28+0300] [ALPM] upgraded gnome-bluetooth (3.34.5-2 -> 3.34.5-3)
[2022-05-01T18:23:28+0300] [ALPM] installed gtksourceview5 (5.4.1-1)
[2022-05-01T18:23:28+0300] [ALPM] upgraded libgee (0.20.5-1 -> 0.20.5-2)
[2022-05-01T18:23:28+0300] [ALPM] upgraded gnome-calculator (41.1-1 -> 42.0-1)
[2022-05-01T18:23:28+0300] [ALPM] installed gnome-desktop-4 (1:42.1-1)
[2022-05-01T18:23:28+0300] [ALPM] installed libnma-gtk4 (1.8.38-1)
[2022-05-01T18:23:28+0300] [ALPM] upgraded gnome-color-manager (3.36.0+r24+ge7eb7b53-1 -> 3.36.0+r25+g4aab8b59-1)
[2022-05-01T18:23:28+0300] [ALPM] upgraded libgnomekbd (3.26.1+2+g8d02ebd-2 -> 1:3.26.1+r5+g54da436-1)
[2022-05-01T18:23:28+0300] [ALPM] installed colord-gtk4 (0.3.0-2)
[2022-05-01T18:23:29+0300] [ALPM] upgraded gnome-control-center (41.4-1 -> 42.1-1)
[2022-05-01T18:23:29+0300] [ALPM] upgraded gnome-calendar (41.2+r5+g2222a4ee-1 -> 42.1-1)
[2022-05-01T18:23:29+0300] [ALPM] upgraded gnome-font-viewer (41.0-1 -> 42.0-1)
[2022-05-01T18:23:29+0300] [ALPM] upgraded gnome-logs (3.36.0-1 -> 42.0-1)
[2022-05-01T18:23:29+0300] [ALPM] upgraded gnome-screenshot (41.0-1 -> 41.0+r25+g45f08f0-1)
[2022-05-01T18:23:29+0300] [ALPM] upgraded gnome-shell-extensions (41.2-1 -> 42.0-1)
[2022-05-01T18:23:29+0300] [ALPM] upgraded gnome-system-monitor (41.0-1 -> 42.0-1)
[2022-05-01T18:23:29+0300] [ALPM] upgraded vte-common (0.66.2-1 -> 0.68.0-2)
[2022-05-01T18:23:29+0300] [ALPM] upgraded vte3 (0.66.2-1 -> 0.68.0-2)
[2022-05-01T18:23:29+0300] [ALPM] upgraded gnome-terminal (3.42.2-2 -> 3.44.0-1)
[2022-05-01T18:23:29+0300] [ALPM] upgraded python-gobject (3.42.0-3 -> 3.42.1-1)
[2022-05-01T18:23:29+0300] [ALPM] upgraded gnome-tweaks (40.0-2 -> 42beta+r9+gc66d8c3-1)
[2022-05-01T18:23:29+0300] [ALPM] upgraded goffice (0.10.51-1 -> 0.10.52-1)
[2022-05-01T18:23:29+0300] [ALPM] upgraded gnumeric (1.12.51-1 -> 1.12.52-1)
[2022-05-01T18:23:29+0300] [ALPM] upgraded groff (1.22.4-6 -> 1.22.4-7)
[2022-05-01T18:23:30+0300] [ALPM] upgraded grub (2:2.06-4 -> 2:2.06-5)
[2022-05-01T18:23:30+0300] [ALPM] upgraded gtksourceview4 (4.8.2-1 -> 4.8.3-1)
[2022-05-01T18:23:30+0300] [ALPM] upgraded gufw (21.04.0-2 -> 22.04-1)
[2022-05-01T18:23:30+0300] [ALPM] upgraded gzip (1.11-1 -> 1.12-1)
[2022-05-01T18:23:30+0300] [ALPM] upgraded imagemagick (7.1.0.25-1 -> 7.1.0.31-1)
[2022-05-01T18:23:30+0300] [ALPM] upgraded intel-ucode (20220207-1 -> 20220419-1)
[2022-05-01T18:23:30+0300] [ALPM] installed libbpf (0.7.0-1)
[2022-05-01T18:23:30+0300] [ALPM] upgraded iproute2 (5.16.0-1 -> 5.17.0-3)
[2022-05-01T18:23:30+0300] [ALPM] upgraded lapack (3.10.0-1 -> 3.10.1-1)
[2022-05-01T18:23:30+0300] [ALPM] upgraded libdbusmenu-glib (16.04.0-4 -> 16.04.0-5)
[2022-05-01T18:23:30+0300] [ALPM] upgraded libdbusmenu-gtk3 (16.04.0-4 -> 16.04.0-5)
[2022-05-01T18:23:30+0300] [ALPM] upgraded libindicator-gtk3 (12.10.1-9 -> 12.10.1-10)
[2022-05-01T18:23:30+0300] [ALPM] upgraded libappindicator-gtk3 (12.10.0.r296-1 -> 12.10.0.r296-2)
[2022-05-01T18:23:30+0300] [ALPM] upgraded libdazzle (3.42.0.1-1 -> 3.44.0-1)
[2022-05-01T18:23:30+0300] [ALPM] upgraded libgweather (40.0+r87+g80e5a652-1 -> 40.0+r87+g80e5a652-2)
[2022-05-01T18:23:30+0300] [ALPM] upgraded libnautilus-extension (41.2-1 -> 42.1.1-1)
[2022-05-01T18:23:30+0300] [ALPM] upgraded osinfo-db (20211216-1 -> 20220214-1)
[2022-05-01T18:23:30+0300] [ALPM] upgraded libosinfo (1.9.0-2 -> 1.10.0-1)
[2022-05-01T18:23:30+0300] [ALPM] upgraded libpgm (5.3.128-1 -> 5.3.128-2)
[2022-05-01T18:23:30+0300] [ALPM] upgraded libpipeline (1.5.5-1 -> 1.5.6-1)
[2022-05-01T18:23:30+0300] [ALPM] upgraded libportal (0.5-1 -> 0.6-1)
[2022-05-01T18:23:30+0300] [ALPM] upgraded libportal-gtk3 (0.5-1 -> 0.6-1)
[2022-05-01T18:23:31+0300] [ALPM] upgraded linux (5.16.10.arch1-1 -> 5.17.5.arch1-1)
[2022-05-01T18:23:31+0300] [ALPM] upgraded linux-firmware-whence (20220209.6342082-1 -> 20220411.705f19a-1)
[2022-05-01T18:23:31+0300] [ALPM] upgraded linux-firmware (20220209.6342082-1 -> 20220411.705f19a-1)
[2022-05-01T18:23:32+0300] [ALPM] upgraded man-db (2.10.1-1 -> 2.10.2-1)
[2022-05-01T18:23:32+0300] [ALPM] upgraded miniupnpc (2.2.2-2 -> 2.2.3-1)
[2022-05-01T18:23:32+0300] [ALPM] upgraded mupdf (1.19.0-2 -> 1.19.1-1)
[2022-05-01T18:23:32+0300] [ALPM] upgraded nano (6.1-1 -> 6.3-1)
[2022-05-01T18:23:32+0300] [ALPM] upgraded tracker3-miners (3.2.1-2 -> 3.3.0-2)
[2022-05-01T18:23:32+0300] [ALPM] upgraded nautilus (41.2-1 -> 42.1.1-1)
[2022-05-01T18:23:32+0300] [ALPM] upgraded wpa_supplicant (2:2.10-2 -> 2:2.10-4)
[2022-05-01T18:23:32+0300] [ALPM] upgraded networkmanager (1.34.0-1 -> 1.36.4-1)
[2022-05-01T18:23:32+0300] [ALPM] upgraded nm-connection-editor (1.24.0-1 -> 1.26.0-1)
[2022-05-01T18:23:32+0300] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2022-05-01T18:23:32+0300] [ALPM] upgraded pacman-mirrorlist (20220116-1 -> 20220410-1)
[2022-05-01T18:23:32+0300] [ALPM] upgraded pacman (6.0.1-3 -> 6.0.1-4)
[2022-05-01T18:23:32+0300] [ALPM] upgraded pciutils (3.7.0-2 -> 3.8.0-1)
[2022-05-01T18:23:32+0300] [ALPM] upgraded python-dnspython (1:2.2.0-1 -> 1:2.2.1-1)
[2022-05-01T18:23:32+0300] [ALPM] upgraded python-numpy (1.22.2-1 -> 1.22.3-1)
[2022-05-01T18:23:32+0300] [ALPM] upgraded python-zipp (3.7.0-1 -> 3.8.0-1)
[2022-05-01T18:23:32+0300] [ALPM] upgraded qpdf (10.6.2-1 -> 10.6.3-1)
[2022-05-01T18:23:32+0300] [ALPM] upgraded xxhash (0.8.1-1 -> 0.8.1-2)
[2022-05-01T18:23:32+0300] [ALPM] upgraded rsync (3.2.3-4 -> 3.2.4-1)
[2022-05-01T18:23:32+0300] [ALPM] upgraded sudo (1.9.9-2 -> 1.9.10-1)
[2022-05-01T18:23:32+0300] [ALPM] upgraded systemd-sysvcompat (250.3-4 -> 250.5-1)
[2022-05-01T18:23:32+0300] [ALPM] upgraded testdisk (7.1-3 -> 7.1-4)
[2022-05-01T18:23:32+0300] [ALPM] upgraded transmission-gtk (3.00-3 -> 3.00-4)
[2022-05-01T18:23:32+0300] [ALPM] upgraded unrar (1:6.1.4-1 -> 1:6.1.6-1)
[2022-05-01T18:23:33+0300] [ALPM] upgraded wget (1.21.2-1 -> 1.21.3-1)
[2022-05-01T18:23:33+0300] [ALPM] installed python-certifi (2021.10.8-3)
[2022-05-01T18:23:33+0300] [ALPM] upgraded yt-dlp (2022.02.04-2 -> 2022.04.08-1)
[2022-05-01T18:23:33+0300] [ALPM] transaction completed
[2022-05-01T18:23:35+0300] [ALPM] running '20-systemd-sysusers.hook'...
[2022-05-01T18:23:35+0300] [ALPM-SCRIPTLET] Creating group 'tss' with GID 972.
[2022-05-01T18:23:35+0300] [ALPM-SCRIPTLET] Creating user 'tss' (tss user for tpm2) with UID 972 and GID 972.
[2022-05-01T18:23:35+0300] [ALPM] running '30-systemd-catalog.hook'...
[2022-05-01T18:23:35+0300] [ALPM] running '30-systemd-daemon-reload.hook'...
[2022-05-01T18:23:35+0300] [ALPM] running '30-systemd-hwdb.hook'...
[2022-05-01T18:23:35+0300] [ALPM] running '30-systemd-sysctl.hook'...
[2022-05-01T18:23:35+0300] [ALPM] running '30-systemd-tmpfiles.hook'...
[2022-05-01T18:23:35+0300] [ALPM] running '30-systemd-udev-reload.hook'...
[2022-05-01T18:23:35+0300] [ALPM] running '30-systemd-update.hook'...
[2022-05-01T18:23:35+0300] [ALPM] running '30-update-mime-database.hook'...
[2022-05-01T18:23:36+0300] [ALPM] running '40-update-ca-trust.hook'...
[2022-05-01T18:23:36+0300] [ALPM] running '60-depmod.hook'...
[2022-05-01T18:23:38+0300] [ALPM] running '90-mkinitcpio-install.hook'...
[2022-05-01T18:23:38+0300] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2022-05-01T18:23:38+0300] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2022-05-01T18:23:38+0300] [ALPM-SCRIPTLET] ==> Starting build: 5.17.5-arch1-1
[2022-05-01T18:23:38+0300] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2022-05-01T18:23:39+0300] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2022-05-01T18:23:39+0300] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2022-05-01T18:23:39+0300] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2022-05-01T18:23:39+0300] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2022-05-01T18:23:40+0300] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2022-05-01T18:23:40+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2022-05-01T18:23:40+0300] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2022-05-01T18:23:40+0300] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2022-05-01T18:23:40+0300] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: /boot/initramfs-linux.img
[2022-05-01T18:23:40+0300] [ALPM-SCRIPTLET] ==> Image generation successful
[2022-05-01T18:23:40+0300] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2022-05-01T18:23:40+0300] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2022-05-01T18:23:40+0300] [ALPM-SCRIPTLET] ==> Starting build: 5.17.5-arch1-1
[2022-05-01T18:23:40+0300] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2022-05-01T18:23:40+0300] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2022-05-01T18:23:41+0300] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2022-05-01T18:23:41+0300] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2022-05-01T18:23:41+0300] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2022-05-01T18:23:41+0300] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2022-05-01T18:23:42+0300] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: qed
[2022-05-01T18:23:42+0300] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: qla2xxx
[2022-05-01T18:23:42+0300] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: wd719x
[2022-05-01T18:23:42+0300] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: qla1280
[2022-05-01T18:23:42+0300] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: xhci_pci
[2022-05-01T18:23:43+0300] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2022-05-01T18:23:44+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2022-05-01T18:23:45+0300] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2022-05-01T18:23:46+0300] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2022-05-01T18:23:46+0300] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-fallback.img
[2022-05-01T18:23:46+0300] [ALPM-SCRIPTLET] ==> Image generation successful
[2022-05-01T18:23:46+0300] [ALPM] running 'dbus-reload.hook'...
[2022-05-01T18:23:47+0300] [ALPM] running 'detect-old-perl-modules.hook'...
[2022-05-01T18:23:47+0300] [ALPM] running 'fontconfig.hook'...
[2022-05-01T18:23:47+0300] [ALPM] running 'gdk-pixbuf-query-loaders.hook'...
[2022-05-01T18:23:47+0300] [ALPM] running 'gio-querymodules.hook'...
[2022-05-01T18:23:47+0300] [ALPM] running 'glib-compile-schemas.hook'...
[2022-05-01T18:23:47+0300] [ALPM] running 'gtk-query-immodules-3.0.hook'...
[2022-05-01T18:23:47+0300] [ALPM] running 'gtk-update-icon-cache.hook'...
[2022-05-01T18:23:47+0300] [ALPM] running 'gtk4-querymodules.hook'...
[2022-05-01T18:23:47+0300] [ALPM] running 'gvfsd.hook'...
[2022-05-01T18:23:47+0300] [ALPM] running 'update-desktop-database.hook'...

Offline

#6 2022-05-01 20:32:06

seth
Member
Registered: 2012-09-03
Posts: 51,213

Re: Cannot make ffplay play videos full-screen

2022-05-01T18:23:28+0300] [ALPM] upgraded xorg-server (21.1.3-2 -> 21.1.3-6)
[2022-05-01T18:23:21+0300] [ALPM] upgraded mesa (21.3.6-1 -> 22.0.2-1)
[2022-05-01T18:23:21+0300] [ALPM] upgraded libdrm (2.4.109-1 -> 2.4.110-1)
[2022-05-01T18:23:26+0300] [ALPM] upgraded libva (2.13.0-1 -> 2.14.0-1)
[2022-05-01T18:23:26+0300] [ALPM] upgraded libvdpau (1.4-1 -> 1.5-1)
[2022-05-01T18:23:26+0300] [ALPM] upgraded ffmpeg (2:5.0-4 -> 2:5.0-6)
[2022-05-01T18:23:26+0300] [ALPM] upgraded ffmpeg4.4 (4.4.1-3 -> 4.4.1-4)

Please post your xorg log.
In doubt, try to remove any xf86-video-* packages (and configurations referecing them - otherwise X11 will fail to start)

I am using ffmpeg-2:5.0-6 from one month ago

"since today" …

Last edited by seth (2022-05-01 20:35:18)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2022-05-01 20:36:26

latalante1
Member
Registered: 2018-08-30
Posts: 110

Re: Cannot make ffplay play videos full-screen

[2022-05-01T18:23:26+0300] [ALPM] upgraded sdl2 (2.0.20-1 -> 2.0.22-1)

ffplay uses SDL2. It is very possible that changes made to this library are the cause.

Dependent on the type of WM used, sdl2 video output (x11, wayland).

edit:
Most WMs have a function (assigned shortcut) to make the window fullscreen. Use it.
This can be helpful for temporary deficiencies in SDL2.

Last edited by latalante1 (2022-05-01 20:54:08)

Offline

#8 2022-05-01 21:32:27

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 29,530
Website

Re: Cannot make ffplay play videos full-screen

seth wrote:

"since today" …

Adds up for me: the OP updates rarely, and the update today pulled the version of ffmpeg that was posted to the repos a month ago.  So "since today" the OP is using ffmpeg from one month ago: yesterday they were using an older version of ffmpeg.

In any case, given that so much was updated, it could well be a library / dependency that triggered the issue.  However, latalante1, I'm not sure I follow your logic: the OPs symptoms do not sound like a failure of the WM to fullscreen the window, rather the window *is* properly fullscreened, but the video is not properly scaled to fit that window.

"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#9 2022-05-02 04:01:45

tethys
Member
Registered: 2019-08-13
Posts: 102

Re: Cannot make ffplay play videos full-screen

Thanks to all for the answers.

I do not have any xf86-video-* packages installed.

Xorg.log:

[     5.345] (--) Log file renamed from "/home/tethys/.local/share/xorg/Xorg.pid-556.log" to "/home/tethys/.local/share/xorg/Xorg.0.log"
[     5.352] 
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[     5.353] Current Operating System: Linux HP 5.17.5-arch1-1 #1 SMP PREEMPT Wed, 27 Apr 2022 20:56:11 +0000 x86_64
[     5.353] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=feee07d9-a7f1-42f6-b564-42a756609aea rw loglevel=3 quiet
[     5.353]  
[     5.353] Current version of pixman: 0.40.0
[     5.353] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.353] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.353] (==) Log file: "/home/tethys/.local/share/xorg/Xorg.0.log", Time: Mon May  2 05:33:48 2022
[     5.355] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.357] (==) No Layout section.  Using the first Screen section.
[     5.357] (==) No screen section available. Using defaults.
[     5.357] (**) |-->Screen "Default Screen Section" (0)
[     5.357] (**) |   |-->Monitor "<default monitor>"
[     5.358] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.358] (==) Automatically adding devices
[     5.358] (==) Automatically enabling devices
[     5.358] (==) Automatically adding GPU devices
[     5.358] (==) Automatically binding GPU devices
[     5.358] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.360] (WW) The directory "/usr/share/fonts/misc" does not exist.
[     5.360] 	Entry deleted from font path.
[     5.361] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[     5.361] 	Entry deleted from font path.
[     5.361] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[     5.361] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     5.361] 	Entry deleted from font path.
[     5.361] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     5.361] 	Entry deleted from font path.
[     5.361] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[     5.361] 	Entry deleted from font path.
[     5.361] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[     5.361] 	Entry deleted from font path.
[     5.361] (==) FontPath set to:
	
[     5.361] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.361] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.361] (II) Module ABI versions:
[     5.361] 	X.Org ANSI C Emulation: 0.4
[     5.361] 	X.Org Video Driver: 25.2
[     5.361] 	X.Org XInput driver : 24.4
[     5.361] 	X.Org Server Extension : 10.0
[     5.362] (++) using VT number 2

[     5.363] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[     5.364] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.364] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[     5.364] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[     5.367] (--) PCI:*(0@0:2:0) 8086:0102:103c:2ab6 rev 9, Mem @ 0xfb000000/4194304, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[     5.367] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     5.367] (II) LoadModule: "glx"
[     5.371] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.379] (II) Module glx: vendor="X.Org Foundation"
[     5.379] 	compiled for 1.21.1.3, module version = 1.0.0
[     5.379] 	ABI class: X.Org Server Extension, version 10.0
[     5.379] (==) Matched intel as autoconfigured driver 0
[     5.379] (==) Matched modesetting as autoconfigured driver 1
[     5.379] (==) Matched fbdev as autoconfigured driver 2
[     5.379] (==) Matched vesa as autoconfigured driver 3
[     5.379] (==) Assigned the driver to the xf86ConfigLayout
[     5.379] (II) LoadModule: "intel"
[     5.380] (WW) Warning, couldn't open module intel
[     5.380] (EE) Failed to load module "intel" (module does not exist, 0)
[     5.380] (II) LoadModule: "modesetting"
[     5.380] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.382] (II) Module modesetting: vendor="X.Org Foundation"
[     5.382] 	compiled for 1.21.1.3, module version = 1.21.1
[     5.382] 	Module class: X.Org Video Driver
[     5.382] 	ABI class: X.Org Video Driver, version 25.2
[     5.382] (II) LoadModule: "fbdev"
[     5.382] (WW) Warning, couldn't open module fbdev
[     5.382] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     5.382] (II) LoadModule: "vesa"
[     5.382] (WW) Warning, couldn't open module vesa
[     5.382] (EE) Failed to load module "vesa" (module does not exist, 0)
[     5.382] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.382] (II) modeset(0): using drv /dev/dri/card0
[     5.382] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[     5.382] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.382] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[     5.382] (==) modeset(0): RGB weight 888
[     5.382] (==) modeset(0): Default visual is TrueColor
[     5.382] (II) Loading sub module "glamoregl"
[     5.382] (II) LoadModule: "glamoregl"
[     5.382] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     5.388] (II) Module glamoregl: vendor="X.Org Foundation"
[     5.388] 	compiled for 1.21.1.3, module version = 1.0.1
[     5.388] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.602] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 2000 (SNB GT1)
[     5.602] (II) modeset(0): glamor initialized
[     5.602] (==) modeset(0): VariableRefresh: disabled
[     5.602] (==) modeset(0): AsyncFlipSecondaries: disabled
[     5.615] (II) modeset(0): Output VGA-1 has no monitor section
[     5.629] (II) modeset(0): Output HDMI-1 has no monitor section
[     5.707] (II) modeset(0): Output DP-1 has no monitor section
[     5.721] (II) modeset(0): Output HDMI-2 has no monitor section
[     5.798] (II) modeset(0): Output DP-2 has no monitor section
[     5.812] (II) modeset(0): EDID for output VGA-1
[     5.812] (II) modeset(0): Manufacturer: HWP  Model: 2906  Serial#: 16843009
[     5.812] (II) modeset(0): Year: 2011  Week: 1
[     5.812] (II) modeset(0): EDID Version: 1.3
[     5.812] (II) modeset(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[     5.812] (II) modeset(0): Sync:  Separate
[     5.812] (II) modeset(0): Max Image Size [cm]: horiz.: 48  vert.: 27
[     5.812] (II) modeset(0): Gamma: 2.20
[     5.812] (II) modeset(0): DPMS capabilities: Off; RGB/Color Display
[     5.812] (II) modeset(0): Default color space is primary color space
[     5.812] (II) modeset(0): First detailed timing is preferred mode
[     5.812] (II) modeset(0): redX: 0.648 redY: 0.339   greenX: 0.282 greenY: 0.603
[     5.812] (II) modeset(0): blueX: 0.143 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[     5.812] (II) modeset(0): Supported established timings:
[     5.812] (II) modeset(0): 720x400@70Hz
[     5.812] (II) modeset(0): 640x480@60Hz
[     5.812] (II) modeset(0): 800x600@60Hz
[     5.812] (II) modeset(0): 1024x768@60Hz
[     5.812] (II) modeset(0): Manufacturer's mask: 0
[     5.812] (II) modeset(0): Supported standard timings:
[     5.812] (II) modeset(0): #0: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[     5.812] (II) modeset(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[     5.812] (II) modeset(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     5.812] (II) modeset(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[     5.812] (II) modeset(0): #4: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[     5.812] (II) modeset(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[     5.812] (II) modeset(0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[     5.812] (II) modeset(0): Supported detailed timing:
[     5.812] (II) modeset(0): clock: 148.5 MHz   Image Size:  477 x 268 mm
[     5.812] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[     5.812] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[     5.812] (II) modeset(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 94 kHz, PixClock max 205 MHz
[     5.812] (II) modeset(0): Monitor name: HP S2231
[     5.812] (II) modeset(0): Serial No: 3CQ101QCRC
[     5.812] (II) modeset(0): EDID (in hex):
[     5.812] (II) modeset(0): 	00ffffffffffff0022f0062901010101
[     5.812] (II) modeset(0): 	0115010368301b782e3585a656489a24
[     5.812] (II) modeset(0): 	125054a1080081c0814081809500a940
[     5.812] (II) modeset(0): 	b300d1c00101023a801871382d40582c
[     5.812] (II) modeset(0): 	4500dd0c1100001e000000fd00324c18
[     5.812] (II) modeset(0): 	5e14000a202020202020000000fc0048
[     5.812] (II) modeset(0): 	502053323233310a20202020000000ff
[     5.812] (II) modeset(0): 	00334351313031514352430a202000ae
[     5.812] (II) modeset(0): Printing probed modes for output VGA-1
[     5.812] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[     5.812] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[     5.812] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[     5.812] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[     5.812] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[     5.812] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[     5.812] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[     5.812] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     5.812] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     5.812] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     5.812] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     5.826] (II) modeset(0): EDID for output HDMI-1
[     5.904] (II) modeset(0): EDID for output DP-1
[     5.917] (II) modeset(0): EDID for output HDMI-2
[     5.917] (II) modeset(0): Manufacturer: GSM  Model: 5669  Serial#: 325428
[     5.917] (II) modeset(0): Year: 2008  Week: 9
[     5.917] (II) modeset(0): EDID Version: 1.3
[     5.917] (II) modeset(0): Digital Display Input
[     5.917] (II) modeset(0): Max Image Size [cm]: horiz.: 43  vert.: 27
[     5.917] (II) modeset(0): Gamma: 2.20
[     5.917] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[     5.917] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[     5.917] (II) modeset(0): First detailed timing is preferred mode
[     5.917] (II) modeset(0): redX: 0.640 redY: 0.352   greenX: 0.288 greenY: 0.628
[     5.917] (II) modeset(0): blueX: 0.147 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[     5.917] (II) modeset(0): Supported established timings:
[     5.917] (II) modeset(0): 720x400@70Hz
[     5.917] (II) modeset(0): 640x480@60Hz
[     5.917] (II) modeset(0): 640x480@75Hz
[     5.917] (II) modeset(0): 800x600@56Hz
[     5.918] (II) modeset(0): 800x600@60Hz
[     5.918] (II) modeset(0): 800x600@75Hz
[     5.918] (II) modeset(0): 832x624@75Hz
[     5.918] (II) modeset(0): 1024x768@60Hz
[     5.918] (II) modeset(0): 1024x768@75Hz
[     5.918] (II) modeset(0): 1280x1024@75Hz
[     5.918] (II) modeset(0): 1152x864@75Hz
[     5.918] (II) modeset(0): Manufacturer's mask: 0
[     5.918] (II) modeset(0): Supported standard timings:
[     5.918] (II) modeset(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149
[     5.918] (II) modeset(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     5.918] (II) modeset(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[     5.918] (II) modeset(0): #3: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[     5.918] (II) modeset(0): Supported detailed timing:
[     5.918] (II) modeset(0): clock: 119.0 MHz   Image Size:  434 x 270 mm
[     5.918] (II) modeset(0): h_active: 1680  h_sync: 1728  h_sync_end 1760 h_blank_end 1840 h_border: 0
[     5.918] (II) modeset(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1080 v_border: 0
[     5.918] (II) modeset(0): Supported detailed timing:
[     5.918] (II) modeset(0): clock: 146.2 MHz   Image Size:  434 x 270 mm
[     5.918] (II) modeset(0): h_active: 1680  h_sync: 1784  h_sync_end 1960 h_blank_end 2240 h_border: 0
[     5.918] (II) modeset(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1089 v_border: 0
[     5.918] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[     5.918] (II) modeset(0): Monitor name: L206W
[     5.918] (II) modeset(0): EDID (in hex):
[     5.918] (II) modeset(0): 	00ffffffffffff001e6d695634f70400
[     5.918] (II) modeset(0): 	09120103ea2b1b78eacfc5a35a49a025
[     5.918] (II) modeset(0): 	125054a76b80950081808140714f0101
[     5.918] (II) modeset(0): 	0101010101017c2e90a0601a1e403020
[     5.918] (II) modeset(0): 	3600b20e1100001a21399030621a2740
[     5.918] (II) modeset(0): 	68b03600b20e1100001c000000fd0038
[     5.918] (II) modeset(0): 	4b1e530f000a202020202020000000fc
[     5.918] (II) modeset(0): 	004c323036570a202020202020200090
[     5.918] (II) modeset(0): Printing probed modes for output HDMI-2
[     5.918] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[     5.918] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[     5.918] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     5.918] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[     5.918] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[     5.918] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[     5.918] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     5.918] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     5.918] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     5.918] (II) modeset(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     5.918] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     5.918] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     5.918] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     5.918] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     5.918] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     5.918] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     5.996] (II) modeset(0): EDID for output DP-2
[     5.996] (II) modeset(0): Output VGA-1 connected
[     5.996] (II) modeset(0): Output HDMI-1 disconnected
[     5.996] (II) modeset(0): Output DP-1 disconnected
[     5.996] (II) modeset(0): Output HDMI-2 connected
[     5.996] (II) modeset(0): Output DP-2 disconnected
[     5.996] (II) modeset(0): Using spanning desktop for initial modes
[     5.996] (II) modeset(0): Output VGA-1 using initial mode 1920x1080 +0+0
[     5.996] (II) modeset(0): Output HDMI-2 using initial mode 1680x1050 +1920+0
[     5.996] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[     5.996] (==) modeset(0): DPI set to (96, 96)
[     5.996] (II) Loading sub module "fb"
[     5.996] (II) LoadModule: "fb"
[     5.996] (II) Module "fb" already built-in
[     6.059] (==) modeset(0): Backing store enabled
[     6.059] (==) modeset(0): Silken mouse enabled
[     6.180] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[     6.180] (==) modeset(0): DPMS enabled
[     6.180] (II) modeset(0): [DRI2] Setup complete
[     6.180] (II) modeset(0): [DRI2]   DRI driver: crocus
[     6.180] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[     6.180] (II) Initializing extension Generic Event Extension
[     6.181] (II) Initializing extension SHAPE
[     6.181] (II) Initializing extension MIT-SHM
[     6.181] (II) Initializing extension XInputExtension
[     6.181] (II) Initializing extension XTEST
[     6.182] (II) Initializing extension BIG-REQUESTS
[     6.182] (II) Initializing extension SYNC
[     6.182] (II) Initializing extension XKEYBOARD
[     6.182] (II) Initializing extension XC-MISC
[     6.182] (II) Initializing extension SECURITY
[     6.183] (II) Initializing extension XFIXES
[     6.183] (II) Initializing extension RENDER
[     6.183] (II) Initializing extension RANDR
[     6.183] (II) Initializing extension COMPOSITE
[     6.184] (II) Initializing extension DAMAGE
[     6.184] (II) Initializing extension MIT-SCREEN-SAVER
[     6.184] (II) Initializing extension DOUBLE-BUFFER
[     6.184] (II) Initializing extension RECORD
[     6.184] (II) Initializing extension DPMS
[     6.184] (II) Initializing extension Present
[     6.185] (II) Initializing extension DRI3
[     6.185] (II) Initializing extension X-Resource
[     6.185] (II) Initializing extension XVideo
[     6.185] (II) Initializing extension XVideo-MotionCompensation
[     6.185] (II) Initializing extension GLX
[     6.194] (II) AIGLX: Loaded and initialized crocus
[     6.195] (II) GLX: Initialized DRI2 GL provider for screen 0
[     6.195] (II) Initializing extension XFree86-VidModeExtension
[     6.195] (II) Initializing extension XFree86-DGA
[     6.195] (II) Initializing extension XFree86-DRI
[     6.195] (II) Initializing extension DRI2
[     6.196] (II) modeset(0): Damage tracking initialized
[     6.196] (II) modeset(0): Setting screen physical size to 952 x 285
[     6.270] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     6.270] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.270] (II) LoadModule: "libinput"
[     6.270] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     6.275] (II) Module libinput: vendor="X.Org Foundation"
[     6.276] 	compiled for 1.21.1.3, module version = 1.2.1
[     6.276] 	Module class: X.Org XInput Driver
[     6.276] 	ABI class: X.Org XInput driver, version 24.4
[     6.276] (II) Using input driver 'libinput' for 'Power Button'
[     6.277] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 26 paused 0
[     6.277] (**) Power Button: always reports core events
[     6.277] (**) Option "Device" "/dev/input/event1"
[     6.284] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     6.284] (II) event1  - Power Button: device is a keyboard
[     6.284] (II) event1  - Power Button: device removed
[     6.284] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[     6.284] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.285] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     6.285] (II) event1  - Power Button: device is a keyboard
[     6.285] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     6.285] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.285] (II) Using input driver 'libinput' for 'Power Button'
[     6.286] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 29 paused 0
[     6.286] (**) Power Button: always reports core events
[     6.286] (**) Option "Device" "/dev/input/event0"
[     6.287] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     6.287] (II) event0  - Power Button: device is a keyboard
[     6.287] (II) event0  - Power Button: device removed
[     6.287] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[     6.287] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     6.288] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     6.288] (II) event0  - Power Button: device is a keyboard
[     6.289] (II) config/udev: Adding input device SEM USB Keyboard (/dev/input/event2)
[     6.289] (**) SEM USB Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.289] (II) Using input driver 'libinput' for 'SEM USB Keyboard'
[     6.290] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 30 paused 0
[     6.290] (**) SEM USB Keyboard: always reports core events
[     6.290] (**) Option "Device" "/dev/input/event2"
[     6.291] (II) event2  - SEM USB Keyboard: is tagged by udev as: Keyboard
[     6.291] (II) event2  - SEM USB Keyboard: device is a keyboard
[     6.292] (II) event2  - SEM USB Keyboard: device removed
[     6.292] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:1A2C:2124.0001/input/input2/event2"
[     6.292] (II) XINPUT: Adding extended input device "SEM USB Keyboard" (type: KEYBOARD, id 8)
[     6.293] (II) event2  - SEM USB Keyboard: is tagged by udev as: Keyboard
[     6.293] (II) event2  - SEM USB Keyboard: device is a keyboard
[     6.294] (II) config/udev: Adding input device SEM USB Keyboard Consumer Control (/dev/input/event3)
[     6.294] (**) SEM USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[     6.294] (II) Using input driver 'libinput' for 'SEM USB Keyboard Consumer Control'
[     6.295] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 31 paused 0
[     6.295] (**) SEM USB Keyboard Consumer Control: always reports core events
[     6.295] (**) Option "Device" "/dev/input/event3"
[     6.296] (II) event3  - SEM USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[     6.296] (II) event3  - SEM USB Keyboard Consumer Control: device is a keyboard
[     6.296] (II) event3  - SEM USB Keyboard Consumer Control: device removed
[     6.296] (II) libinput: SEM USB Keyboard Consumer Control: needs a virtual subdevice
[     6.296] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:1A2C:2124.0002/input/input3/event3"
[     6.296] (II) XINPUT: Adding extended input device "SEM USB Keyboard Consumer Control" (type: MOUSE, id 9)
[     6.296] (**) Option "AccelerationScheme" "none"
[     6.296] (**) SEM USB Keyboard Consumer Control: (accel) selected scheme none/0
[     6.296] (**) SEM USB Keyboard Consumer Control: (accel) acceleration factor: 2.000
[     6.296] (**) SEM USB Keyboard Consumer Control: (accel) acceleration threshold: 4
[     6.298] (II) event3  - SEM USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[     6.298] (II) event3  - SEM USB Keyboard Consumer Control: device is a keyboard
[     6.298] (II) config/udev: Adding input device SEM USB Keyboard System Control (/dev/input/event4)
[     6.298] (**) SEM USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[     6.298] (II) Using input driver 'libinput' for 'SEM USB Keyboard System Control'
[     6.300] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 32 paused 0
[     6.300] (**) SEM USB Keyboard System Control: always reports core events
[     6.300] (**) Option "Device" "/dev/input/event4"
[     6.301] (II) event4  - SEM USB Keyboard System Control: is tagged by udev as: Keyboard
[     6.301] (II) event4  - SEM USB Keyboard System Control: device is a keyboard
[     6.301] (II) event4  - SEM USB Keyboard System Control: device removed
[     6.301] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:1A2C:2124.0002/input/input4/event4"
[     6.301] (II) XINPUT: Adding extended input device "SEM USB Keyboard System Control" (type: KEYBOARD, id 10)
[     6.302] (II) event4  - SEM USB Keyboard System Control: is tagged by udev as: Keyboard
[     6.302] (II) event4  - SEM USB Keyboard System Control: device is a keyboard
[     6.303] (II) config/udev: Adding input device HDA Intel PCH Speaker Surround (/dev/input/event10)
[     6.303] (II) No input driver specified, ignoring this device.
[     6.303] (II) This device may have been added with another device file.
[     6.303] (II) config/udev: Adding input device HDA Intel PCH Speaker CLFE (/dev/input/event11)
[     6.303] (II) No input driver specified, ignoring this device.
[     6.303] (II) This device may have been added with another device file.
[     6.303] (II) config/udev: Adding input device HDA Intel PCH Speaker Side (/dev/input/event12)
[     6.303] (II) No input driver specified, ignoring this device.
[     6.303] (II) This device may have been added with another device file.
[     6.304] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[     6.304] (II) No input driver specified, ignoring this device.
[     6.304] (II) This device may have been added with another device file.
[     6.304] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[     6.304] (II) No input driver specified, ignoring this device.
[     6.304] (II) This device may have been added with another device file.
[     6.304] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event7)
[     6.304] (II) No input driver specified, ignoring this device.
[     6.304] (II) This device may have been added with another device file.
[     6.305] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[     6.305] (II) No input driver specified, ignoring this device.
[     6.305] (II) This device may have been added with another device file.
[     6.305] (II) config/udev: Adding input device HDA Intel PCH Speaker Front (/dev/input/event9)
[     6.305] (II) No input driver specified, ignoring this device.
[     6.305] (II) This device may have been added with another device file.
[     6.306] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
[     6.306] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[     6.306] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[     6.307] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 33 paused 0
[     6.307] (**) Logitech USB Optical Mouse: always reports core events
[     6.307] (**) Option "Device" "/dev/input/event5"
[     6.308] (II) event5  - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[     6.308] (II) event5  - Logitech USB Optical Mouse: device is a pointer
[     6.308] (II) event5  - Logitech USB Optical Mouse: device removed
[     6.308] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.7/2-1.1.7:1.0/0003:046D:C077.0003/input/input5/event5"
[     6.308] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[     6.309] (**) Option "AccelerationScheme" "none"
[     6.309] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[     6.309] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[     6.309] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[     6.310] (II) event5  - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[     6.310] (II) event5  - Logitech USB Optical Mouse: device is a pointer
[     6.311] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[     6.311] (II) No input driver specified, ignoring this device.
[     6.311] (II) This device may have been added with another device file.
[     6.311] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[     6.311] (II) No input driver specified, ignoring this device.
[     6.311] (II) This device may have been added with another device file.
[     6.348] (**) SEM USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[     6.348] (II) Using input driver 'libinput' for 'SEM USB Keyboard Consumer Control'
[     6.348] (II) systemd-logind: returning pre-existing fd for /dev/input/event3 13:67
[     6.348] (**) SEM USB Keyboard Consumer Control: always reports core events
[     6.348] (**) Option "Device" "/dev/input/event3"
[     6.348] (II) libinput: SEM USB Keyboard Consumer Control: is a virtual subdevice
[     6.348] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:1A2C:2124.0002/input/input3/event3"
[     6.348] (II) XINPUT: Adding extended input device "SEM USB Keyboard Consumer Control" (type: KEYBOARD, id 12)
[     7.098] (II) modeset(0): EDID vendor "GSM", prod id 22121
[     7.098] (II) modeset(0): Using EDID range info for horizontal sync
[     7.098] (II) modeset(0): Using EDID range info for vertical refresh
[     7.098] (II) modeset(0): Printing DDC gathered Modelines:
[     7.098] (II) modeset(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[     7.098] (II) modeset(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[     7.098] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     7.098] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     7.098] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     7.098] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     7.098] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     7.098] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     7.098] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     7.098] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     7.098] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     7.098] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     7.098] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     7.098] (II) modeset(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[     7.098] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[     7.098] (II) modeset(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[     7.331] (II) modeset(0): Allocate new frame buffer 3600x1184 stride
[     8.758] (II) modeset(0): EDID vendor "GSM", prod id 22121
[     8.758] (II) modeset(0): Using hsync ranges from config file
[     8.758] (II) modeset(0): Using vrefresh ranges from config file
[     8.758] (II) modeset(0): Printing DDC gathered Modelines:
[     8.758] (II) modeset(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[     8.758] (II) modeset(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[     8.758] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     8.758] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     8.758] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     8.758] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     8.758] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     8.758] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     8.758] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     8.758] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     8.758] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     8.758] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     8.758] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     8.758] (II) modeset(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[     8.758] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[     8.758] (II) modeset(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[  2073.539] (EE) event2  - SEM USB Keyboard: client bug: event processing lagging behind by 36ms, your system is too slow
[  2174.802] (EE) event2  - SEM USB Keyboard: client bug: event processing lagging behind by 29ms, your system is too slow
[  2465.448] (EE) event2  - SEM USB Keyboard: client bug: event processing lagging behind by 28ms, your system is too slow
[  3202.219] (EE) event2  - SEM USB Keyboard: client bug: event processing lagging behind by 29ms, your system is too slow

I have tested ffplay playing videos on another computer I updated yesterday and the behavior is the same (ie defective), but when pressing "f" (for full-screen) repeatedly in the video window the video scaled properly in about 10% of the cases. This other computer also runs on Xorg but it runs Openbox.

If I understand correctly what latalante1 is saying, he might be right: if I maximize the window itself (not using "f") the video scales properly, but if I then press "f" the video still does not scale to full-screen, preserving its size.

Other weird behaviors:
- if I stop the video and maximize the window the video does not scale; when I restart playing the video scales to the maximized window;
- one can enter full-screen also by a mouse double-click; after double-click the mouse cursor finds itself exactly on the same position relative to the (unscaled) video on the upper-left part of the screen.

Last edited by tethys (2022-05-02 06:14:38)

Offline

#10 2022-05-02 04:13:35

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 29,530
Website

Re: Cannot make ffplay play videos full-screen

FYI, I actually just saw a very similar issue.  For me the video does resize a bit, but not properly.  I update much more regularly, but did have the sdl2 udpate today (and it seemed the only potential candidate in my updated package list).  I downgraded sdl2 to the previous version (2.0.20-2) and ffplay immediately worked again as expected.  I updated sdl2 again and re-confirmed the problem.

I still don't see the connection to the WM though, as the window does fullscreen properly - the video just doesn't scale correctly to that window.

In any case, it seems that downgrading sdl2 in the short term is a viable work-around.

Last edited by Trilby (2022-05-02 04:14:15)

"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#11 2022-05-02 06:24:23

tethys
Member
Registered: 2019-08-13
Posts: 102

Re: Cannot make ffplay play videos full-screen

Thank you for your investigation, Trilby. I am a little bit confused about what you say regarding WM. I was talking about two different things previously: maximizing the video window ((usng that small button called "Maximize") and entering full-screen mode by pressing "f". Video-window maximizing works properly and the video also scales. What is not working is the full-screen mode by pressing "f". A workaround is to pass "-fs" option to ffplay, then the video plays properly full-screen.

Offline

#12 2022-05-02 06:38:37

seth
Member
Registered: 2012-09-03
Posts: 51,213

Re: Cannot make ffplay play videos full-screen

latalante1 brought up the WM
Smells like https://github.com/libsdl-org/SDL/issues/5593

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#13 2022-05-02 06:59:15

latalante1
Member
Registered: 2018-08-30
Posts: 110

Re: Cannot make ffplay play videos full-screen

I wrote clearly that the most likely cause of the problem is the SDL2 upgrade.

I added that the symptoms for different WMs may be different. The malfunction of the fullscreen may depend on the used sdl2 video output.

For example, under i3-wm it is enough to use `$mod-f`.
Under sway with (xwyland), ffplay works fine (`f`).
For a sway with sdl2 wayland output SDL_VIDEODRIVER=wayland, a different combination must be used first `$mod-f` and then `f`.

Downgrading of SDL2 is not a solution. The next SDL2 2.0.24 release will be in three months from now.
You need to report a bug to sdl2.

Last edited by latalante1 (2022-05-02 07:00:01)

Offline

#14 2022-05-02 15:50:54

tethys
Member
Registered: 2019-08-13
Posts: 102

Re: Cannot make ffplay play videos full-screen

I do not know how to report a bug, but I can try.
On the other hand, isn't the issue mentioned by Set in #12 already a bug report? They say that the issue was "added to the 2.0.24 milestone".

Offline

#15 2022-05-02 18:45:09

latalante1
Member
Registered: 2018-08-30
Posts: 110

Re: Cannot make ffplay play videos full-screen

Rather no need to report anymore. Someone has already signaled the bug there.
You have to be patient. Another question is whether the Achlinux maintainer of sdl2 will be willing to include a possible fix.

If you are comfortable with going back to the previous version, roll back.
In my opinion, there is no such need. You can work around this problem with the fullscreen from WM.

Offline

#16 2022-05-20 18:51:49

latalante1
Member
Registered: 2018-08-30
Posts: 110

Re: Cannot make ffplay play videos full-screen

Yesterday it was finally fixed.
https://github.com/libsdl-org/SDL/commi … a6be41f5f0

Offline

#17 2022-05-21 22:54:51

once
Member
From: Taiwan
Registered: 2006-09-12
Posts: 266

Re: Cannot make ffplay play videos full-screen

latalante1 wrote:

this patch break full-screen/wayland.

Offline

#18 2022-05-21 23:27:49

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 29,530
Website

Re: Cannot make ffplay play videos full-screen

once, how did you apply this patch?  I just installed sdl2-git from the AUR, and it had no effect at all on the symptoms in wayland (i.e., it behaved just as sdl2 from the repos).

"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#19 2022-05-21 23:37:27

once
Member
From: Taiwan
Registered: 2006-09-12
Posts: 266

Re: Cannot make ffplay play videos full-screen

Trilby wrote:

once, how did you apply this patch?  I just installed sdl2-git from the AUR, and it had no effect at all on the symptoms in wayland (i.e., it behaved just as sdl2 from the repos).

just a few line, manual edit.

Offline

#20 2022-05-22 00:07:58

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 29,530
Website

Re: Cannot make ffplay play videos full-screen

That's not quite what I meant: the patch has been applied to the code I just built and installed, and it has no effect in wayland - which is not surprising as it is specifically in X11-only code that will never run on wayland.  So I'm curious what you did that resulted in something different - knowing which code you manually applied this to would be relevant as it's clearly not the git code ... because you couldn't apply it manually when it's already there.

Last edited by Trilby (2022-05-22 00:09:28)

"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#21 2022-05-22 00:15:46

once
Member
From: Taiwan
Registered: 2006-09-12
Posts: 266

Re: Cannot make ffplay play videos full-screen

no idea, 2.0.22 no issue/wayland but 2.0.22-patch broken/wayland.
ps. ffplay some.mp4

Offline

#22 2022-05-22 01:11:54

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 29,530
Website

Re: Cannot make ffplay play videos full-screen

Ah, that's what I was asking - you applied that patch to 2.0.22 code.  I'm not sure how much sense that makes as there have been more commits than I bothered to count between 2.0.22 and that patch (in the ballpark of hundreds).  However, I did try to replicate and applied that patch manually to 2.0.22 code, and saw absolutely no difference (again because it's x11 code that will not even execute in a wayland session).  Are you sure something else didn't get changed?  And are you sure you are running on wayland (and also not Xwayland)?

"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

Pages: 1

Board footer

Powered by FluxBB