You are not logged in.

#1 2022-05-23 19:08:51

hannescam
Member
Registered: 2022-05-23
Posts: 4

[SOLVED] my Weida Touchscreen does not work

i have an "Weida Hi-Tech Co., Ltd. CoolTouch® System" connected via usb to my pc.
the usb id is: 2575:0001
it isnot recognized with xinput
the output of sudo dmesg:

 [hannes@Hannes-GUSCHTAV ~]$ sudo dmesg
[    0.000000] microcode: microcode updated early to revision 0xf0, date = 2021-11-12
[    0.000000] Linux version 5.17.9-arch1-1 (linux@archlinux) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT Wed, 18 May 2022 17:30:11 +0000
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=649380e1-5e3d-4971-841a-2462a97029b1 rw quiet intel_iommu=on
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 2032
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000005efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000005f000-0x000000000005ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000060000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000032a32fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000032a33000-0x0000000032a33fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000032a34000-0x0000000032a34fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000032a35000-0x000000003da93fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003da94000-0x000000003def1fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003def2000-0x000000003e058fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003e059000-0x000000003e401fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003e402000-0x000000003ee4ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003ee50000-0x000000003eefefff] type 20
[    0.000000] BIOS-e820: [mem 0x000000003eeff000-0x000000003eefffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ef00000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002bdffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi: ACPI 2.0=0x3e376000 ACPI=0x3e376000 SMBIOS=0x3ec41000 SMBIOS 3.0=0x3ec40000 ESRT=0x3c097218 MEMATTR=0x3c07a018 
[    0.000000] SMBIOS 3.1.1 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. H370AORUSGAMING3WIFI/H370 AORUS GAMING 3 WIFI-CF, BIOS F13 06/05/2019
[    0.000000] tsc: Detected 3600.000 MHz processor
[    0.000349] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000351] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000356] last_pfn = 0x2be000 max_arch_pfn = 0x400000000
[    0.000429] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000903] last_pfn = 0x3ef00 max_arch_pfn = 0x400000000
[    0.005924] found SMP MP-table at [mem 0x000fce70-0x000fce7f]
[    0.005931] esrt: Reserving ESRT space from 0x000000003c097218 to 0x000000003c097250.
[    0.005935] e820: update [mem 0x3c097000-0x3c097fff] usable ==> reserved
[    0.005944] Using GB pages for direct mapping
[    0.006283] Secure boot disabled
[    0.006283] RAMDISK: [mem 0x36499000-0x37243fff]
[    0.006287] ACPI: Early table checksum verification disabled
[    0.006289] ACPI: RSDP 0x000000003E376000 000024 (v02 ALASKA)
[    0.006292] ACPI: XSDT 0x000000003E3760A8 0000D4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006296] ACPI: FACP 0x000000003E3B6D90 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.006300] ACPI: DSDT 0x000000003E376218 040B72 (v02 ALASKA A M I    01072009 INTL 20160527)
[    0.006302] ACPI: FACS 0x000000003E401080 000040
[    0.006304] ACPI: APIC 0x000000003E3B6EA8 000084 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.006306] ACPI: FPDT 0x000000003E3B6F30 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006307] ACPI: FIDT 0x000000003E3B6F78 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006309] ACPI: MCFG 0x000000003E3B7018 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.006311] ACPI: SSDT 0x000000003E3B7058 000204 (v01 ALASKA A M I    00001000 INTL 20160527)
[    0.006313] ACPI: SSDT 0x000000003E3B7260 0017D5 (v02 ALASKA A M I    00003000 INTL 20160527)
[    0.006315] ACPI: SSDT 0x000000003E3B8A38 00830C (v01 ALASKA A M I    00000001 INTL 20160527)
[    0.006317] ACPI: SSDT 0x000000003E3C0D48 0031C7 (v02 ALASKA A M I    00003000 INTL 20160527)
[    0.006319] ACPI: SSDT 0x000000003E3C3F10 002358 (v02 ALASKA A M I    00001000 INTL 20160527)
[    0.006321] ACPI: HPET 0x000000003E3C6268 000038 (v01 ALASKA A M I    00000002      01000013)
[    0.006323] ACPI: SSDT 0x000000003E3C62A0 000F9E (v02 ALASKA A M I    00001000 INTL 20160527)
[    0.006325] ACPI: SSDT 0x000000003E3C7240 002D1B (v02 ALASKA A M I    00000000 INTL 20160527)
[    0.006327] ACPI: UEFI 0x000000003E3C9F60 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.006329] ACPI: LPIT 0x000000003E3C9FA8 00005C (v01 ALASKA A M I    00000002      01000013)
[    0.006331] ACPI: SSDT 0x000000003E3CA008 0027DE (v02 ALASKA A M I    00001000 INTL 20160527)
[    0.006333] ACPI: SSDT 0x000000003E3CC7E8 000FFE (v02 ALASKA A M I    00000000 INTL 20160527)
[    0.006335] ACPI: DBGP 0x000000003E3CD7E8 000034 (v01 ALASKA A M I    00000002      01000013)
[    0.006337] ACPI: DBG2 0x000000003E3CD820 000054 (v00 ALASKA A M I    00000002      01000013)
[    0.006339] ACPI: DMAR 0x000000003E3CD878 000070 (v01 ALASKA A M I    00000002      01000013)
[    0.006340] ACPI: BGRT 0x000000003E3CD8E8 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006342] ACPI: WSMT 0x000000003E3CD920 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006344] ACPI: Reserving FACP table memory at [mem 0x3e3b6d90-0x3e3b6ea3]
[    0.006345] ACPI: Reserving DSDT table memory at [mem 0x3e376218-0x3e3b6d89]
[    0.006346] ACPI: Reserving FACS table memory at [mem 0x3e401080-0x3e4010bf]
[    0.006346] ACPI: Reserving APIC table memory at [mem 0x3e3b6ea8-0x3e3b6f2b]
[    0.006347] ACPI: Reserving FPDT table memory at [mem 0x3e3b6f30-0x3e3b6f73]
[    0.006348] ACPI: Reserving FIDT table memory at [mem 0x3e3b6f78-0x3e3b7013]
[    0.006348] ACPI: Reserving MCFG table memory at [mem 0x3e3b7018-0x3e3b7053]
[    0.006349] ACPI: Reserving SSDT table memory at [mem 0x3e3b7058-0x3e3b725b]
[    0.006350] ACPI: Reserving SSDT table memory at [mem 0x3e3b7260-0x3e3b8a34]
[    0.006350] ACPI: Reserving SSDT table memory at [mem 0x3e3b8a38-0x3e3c0d43]
[    0.006351] ACPI: Reserving SSDT table memory at [mem 0x3e3c0d48-0x3e3c3f0e]
[    0.006352] ACPI: Reserving SSDT table memory at [mem 0x3e3c3f10-0x3e3c6267]
[    0.006352] ACPI: Reserving HPET table memory at [mem 0x3e3c6268-0x3e3c629f]
[    0.006353] ACPI: Reserving SSDT table memory at [mem 0x3e3c62a0-0x3e3c723d]
[    0.006354] ACPI: Reserving SSDT table memory at [mem 0x3e3c7240-0x3e3c9f5a]
[    0.006354] ACPI: Reserving UEFI table memory at [mem 0x3e3c9f60-0x3e3c9fa1]
[    0.006355] ACPI: Reserving LPIT table memory at [mem 0x3e3c9fa8-0x3e3ca003]
[    0.006356] ACPI: Reserving SSDT table memory at [mem 0x3e3ca008-0x3e3cc7e5]
[    0.006357] ACPI: Reserving SSDT table memory at [mem 0x3e3cc7e8-0x3e3cd7e5]
[    0.006357] ACPI: Reserving DBGP table memory at [mem 0x3e3cd7e8-0x3e3cd81b]
[    0.006358] ACPI: Reserving DBG2 table memory at [mem 0x3e3cd820-0x3e3cd873]
[    0.006359] ACPI: Reserving DMAR table memory at [mem 0x3e3cd878-0x3e3cd8e7]
[    0.006359] ACPI: Reserving BGRT table memory at [mem 0x3e3cd8e8-0x3e3cd91f]
[    0.006360] ACPI: Reserving WSMT table memory at [mem 0x3e3cd920-0x3e3cd947]
[    0.006496] No NUMA configuration found
[    0.006497] Faking a node at [mem 0x0000000000000000-0x00000002bdffffff]
[    0.006499] NODE_DATA(0) allocated [mem 0x2bdffc000-0x2bdffffff]
[    0.006515] Zone ranges:
[    0.006516]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.006517]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.006518]   Normal   [mem 0x0000000100000000-0x00000002bdffffff]
[    0.006519]   Device   empty
[    0.006520] Movable zone start for each node
[    0.006520] Early memory node ranges
[    0.006521]   node   0: [mem 0x0000000000001000-0x000000000005efff]
[    0.006522]   node   0: [mem 0x0000000000060000-0x000000000009ffff]
[    0.006522]   node   0: [mem 0x0000000000100000-0x0000000032a32fff]
[    0.006523]   node   0: [mem 0x0000000032a35000-0x000000003da93fff]
[    0.006524]   node   0: [mem 0x000000003def2000-0x000000003e058fff]
[    0.006525]   node   0: [mem 0x000000003eeff000-0x000000003eefffff]
[    0.006525]   node   0: [mem 0x0000000100000000-0x00000002bdffffff]
[    0.006527] Initmem setup node 0 [mem 0x0000000000001000-0x00000002bdffffff]
[    0.006529] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.006530] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.006546] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.008465] On node 0, zone DMA32: 2 pages in unavailable ranges
[    0.008482] On node 0, zone DMA32: 1118 pages in unavailable ranges
[    0.008514] On node 0, zone DMA32: 3750 pages in unavailable ranges
[    0.025219] On node 0, zone Normal: 4352 pages in unavailable ranges
[    0.025288] On node 0, zone Normal: 8192 pages in unavailable ranges
[    0.025574] ACPI: PM-Timer IO Port: 0x1808
[    0.025579] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.025580] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.025581] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.025582] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.025619] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.025621] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.025623] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.025625] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.025626] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.025631] e820: update [mem 0x39b5b000-0x39bb2fff] usable ==> reserved
[    0.025637] TSC deadline timer available
[    0.025638] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.025651] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.025653] PM: hibernation: Registered nosave memory: [mem 0x0005f000-0x0005ffff]
[    0.025654] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.025655] PM: hibernation: Registered nosave memory: [mem 0x32a33000-0x32a33fff]
[    0.025656] PM: hibernation: Registered nosave memory: [mem 0x32a34000-0x32a34fff]
[    0.025657] PM: hibernation: Registered nosave memory: [mem 0x39b5b000-0x39bb2fff]
[    0.025658] PM: hibernation: Registered nosave memory: [mem 0x3c097000-0x3c097fff]
[    0.025659] PM: hibernation: Registered nosave memory: [mem 0x3da94000-0x3def1fff]
[    0.025661] PM: hibernation: Registered nosave memory: [mem 0x3e059000-0x3e401fff]
[    0.025661] PM: hibernation: Registered nosave memory: [mem 0x3e402000-0x3ee4ffff]
[    0.025662] PM: hibernation: Registered nosave memory: [mem 0x3ee50000-0x3eefefff]
[    0.025663] PM: hibernation: Registered nosave memory: [mem 0x3ef00000-0x3fffffff]
[    0.025663] PM: hibernation: Registered nosave memory: [mem 0x40000000-0xdfffffff]
[    0.025664] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.025664] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.025665] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.025665] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.025666] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.025666] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.025667] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.025667] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.025668] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.025669] [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.025670] Booting paravirtualized kernel on bare hardware
[    0.025672] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.029395] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.029531] percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u524288
[    0.029536] pcpu-alloc: s217088 r8192 d28672 u524288 alloc=1*2097152
[    0.029538] pcpu-alloc: [0] 0 1 2 3 
[    0.029552] Fallback order for Node 0: 0 
[    0.029554] Built 1 zonelists, mobility grouping on.  Total pages: 2046986
[    0.029555] Policy zone: Normal
[    0.029556] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=649380e1-5e3d-4971-841a-2462a97029b1 rw quiet intel_iommu=on
[    0.029592] DMAR: IOMMU enabled
[    0.029594] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux", will be passed to user space.
[    0.030021] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.030254] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.030406] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.064137] Memory: 7994484K/8318560K available (14343K kernel code, 2092K rwdata, 10940K rodata, 1788K init, 3380K bss, 323816K reserved, 0K cma-reserved)
[    0.064143] random: get_random_u64 called from __kmem_cache_create+0x2a/0x530 with crng_init=0
[    0.064223] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.064232] Kernel/User page tables isolation: enabled
[    0.064246] ftrace: allocating 44879 entries in 176 pages
[    0.069707] ftrace: allocated 176 pages with 3 groups
[    0.069761] Dynamic Preempt: full
[    0.069779] rcu: Preemptible hierarchical RCU implementation.
[    0.069780] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.069781] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.069781] 	Trampoline variant of Tasks RCU enabled.
[    0.069782] 	Rude variant of Tasks RCU enabled.
[    0.069782] 	Tracing variant of Tasks RCU enabled.
[    0.069783] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.069783] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.072496] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 16
[    0.072907] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.073028] random: crng init done (trusting CPU's manufacturer)
[    0.073046] Console: colour dummy device 80x25
[    0.073055] printk: console [tty0] enabled
[    0.073068] ACPI: Core revision 20211217
[    0.073359] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.073448] APIC: Switch to symmetric I/O mode setup
[    0.073450] DMAR: Host address width 39
[    0.073451] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.073455] DMAR: dmar0: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.073456] DMAR: RMRR base: 0x0000003e9d4000 end: 0x0000003ec1dfff
[    0.073459] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 0
[    0.073460] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.073460] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.074984] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.074986] x2apic enabled
[    0.075010] Switched APIC routing to cluster x2apic.
[    0.079502] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.093414] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns
[    0.093417] Calibrating delay loop (skipped), value calculated using timer frequency.. 7202.00 BogoMIPS (lpj=12000000)
[    0.093419] pid_max: default: 32768 minimum: 301
[    0.094955] LSM: Security Framework initializing
[    0.094959] landlock: Up and running.
[    0.094960] Yama: becoming mindful.
[    0.094964] LSM support for eBPF active
[    0.094991] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.095010] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.095160] x86/cpu: SGX disabled by BIOS.
[    0.095164] CPU0: Thermal monitoring enabled (TM1)
[    0.095206] process: using mwait in idle threads
[    0.095207] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.095208] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.095211] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.095212] Spectre V2 : Mitigation: Retpolines
[    0.095213] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.095213] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.095214] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.095215] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.095219] SRBDS: Mitigation: Microcode
[    0.095220] MDS: Mitigation: Clear CPU buffers
[    0.097066] Freeing SMP alternatives memory: 36K
[    0.097272] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1137
[    0.097289] smpboot: CPU0: Intel(R) Core(TM) i3-9100F CPU @ 3.60GHz (family: 0x6, model: 0x9e, stepping: 0xb)
[    0.097392] cblist_init_generic: Setting adjustable number of callback queues.
[    0.097393] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.097402] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.097411] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.097418] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.097443] ... version:                4
[    0.097443] ... bit width:              48
[    0.097444] ... generic registers:      8
[    0.097444] ... value mask:             0000ffffffffffff
[    0.097445] ... max period:             00007fffffffffff
[    0.097445] ... fixed-purpose events:   3
[    0.097446] ... event mask:             00000007000000ff
[    0.097514] rcu: Hierarchical SRCU implementation.
[    0.097956] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.097990] smp: Bringing up secondary CPUs ...
[    0.098057] x86: Booting SMP configuration:
[    0.098057] .... node  #0, CPUs:      #1 #2 #3
[    0.101507] smp: Brought up 1 node, 4 CPUs
[    0.101507] smpboot: Max logical packages: 1
[    0.101507] smpboot: Total of 4 processors activated (28811.00 BogoMIPS)
[    0.103532] devtmpfs: initialized
[    0.103532] x86/mm: Memory block size: 128MB
[    0.103742] ACPI: PM: Registering ACPI NVS region [mem 0x32a33000-0x32a33fff] (4096 bytes)
[    0.103742] ACPI: PM: Registering ACPI NVS region [mem 0x3e059000-0x3e401fff] (3837952 bytes)
[    0.103742] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.103742] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.103742] pinctrl core: initialized pinctrl subsystem
[    0.103742] PM: RTC time: 18:53:04, date: 2022-05-23
[    0.103804] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.103894] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.103936] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.103978] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.103986] audit: initializing netlink subsys (disabled)
[    0.103991] audit: type=2000 audit(1653331984.029:1): state=initialized audit_enabled=0 res=1
[    0.103991] thermal_sys: Registered thermal governor 'fair_share'
[    0.103991] thermal_sys: Registered thermal governor 'bang_bang'
[    0.103991] thermal_sys: Registered thermal governor 'step_wise'
[    0.103991] thermal_sys: Registered thermal governor 'user_space'
[    0.103991] thermal_sys: Registered thermal governor 'power_allocator'
[    0.103991] cpuidle: using governor ladder
[    0.103991] cpuidle: using governor menu
[    0.103991] HugeTLB: can free 4094 vmemmap pages for hugepages-1048576kB
[    0.103991] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.103991] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.103991] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.103991] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.103991] PCI: Using configuration type 1 for base access
[    0.104359] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.104362] HugeTLB: can free 6 vmemmap pages for hugepages-2048kB
[    0.104362] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.104362] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.104362] ACPI: Added _OSI(Module Device)
[    0.104362] ACPI: Added _OSI(Processor Device)
[    0.104362] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.104362] ACPI: Added _OSI(Processor Aggregator Device)
[    0.104362] ACPI: Added _OSI(Linux-Dell-Video)
[    0.104362] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.104362] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.164466] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.715396] ACPI: Dynamic OEM Table Load:
[    0.715401] ACPI: SSDT 0xFFFF8CB100E57800 00078C (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.716419] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.717754] ACPI: Dynamic OEM Table Load:
[    0.717758] ACPI: SSDT 0xFFFF8CB1002F8000 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.719029] ACPI: Dynamic OEM Table Load:
[    0.719034] ACPI: SSDT 0xFFFF8CB10012F000 000EF1 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.720594] ACPI: Dynamic OEM Table Load:
[    0.720597] ACPI: SSDT 0xFFFF8CB1002F9C00 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.721550] ACPI: Dynamic OEM Table Load:
[    0.721553] ACPI: SSDT 0xFFFF8CB1002F8C00 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.724806] ACPI: Interpreter enabled
[    0.724837] ACPI: PM: (supports S0 S3 S4 S5)
[    0.724838] ACPI: Using IOAPIC for interrupt routing
[    0.724867] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.725878] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.733789] ACPI: PM: Power Resource [WRST]
[    0.733852] ACPI: PM: Power Resource [DRST]
[    0.737556] ACPI: PM: Power Resource [USBC]
[    0.739962] ACPI: PM: Power Resource [V0PR]
[    0.740142] ACPI: PM: Power Resource [V1PR]
[    0.740306] ACPI: PM: Power Resource [V2PR]
[    0.744792] ACPI: PM: Power Resource [WRST]
[    0.746654] ACPI: PM: Power Resource [FN00]
[    0.746707] ACPI: PM: Power Resource [FN01]
[    0.746759] ACPI: PM: Power Resource [FN02]
[    0.746812] ACPI: PM: Power Resource [FN03]
[    0.746863] ACPI: PM: Power Resource [FN04]
[    0.747233] ACPI: PM: Power Resource [PIN]
[    0.747727] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.747733] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.747815] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.747965] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC]
[    0.747966] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.748763] PCI host bridge to bus 0000:00
[    0.748764] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.748766] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.748767] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.748768] pci_bus 0000:00: root bus resource [mem 0x40000000-0xdfffffff window]
[    0.748769] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.748770] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.748838] pci 0000:00:00.0: [8086:3e1f] type 00 class 0x060000
[    0.748886] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.748917] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.749450] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[    0.749467] pci 0000:00:12.0: reg 0x10: [mem 0x6323d000-0x6323dfff 64bit]
[    0.749607] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[    0.749620] pci 0000:00:14.0: reg 0x10: [mem 0x63220000-0x6322ffff 64bit]
[    0.749669] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.750108] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[    0.750122] pci 0000:00:14.2: reg 0x10: [mem 0x63236000-0x63237fff 64bit]
[    0.750131] pci 0000:00:14.2: reg 0x18: [mem 0x6323c000-0x6323cfff 64bit]
[    0.750232] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[    0.750250] pci 0000:00:16.0: reg 0x10: [mem 0x6323b000-0x6323bfff 64bit]
[    0.750315] pci 0000:00:16.0: PME# supported from D3hot
[    0.750718] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
[    0.750729] pci 0000:00:17.0: reg 0x10: [mem 0x63234000-0x63235fff]
[    0.750734] pci 0000:00:17.0: reg 0x14: [mem 0x6323a000-0x6323a0ff]
[    0.750740] pci 0000:00:17.0: reg 0x18: [io  0x5050-0x5057]
[    0.750746] pci 0000:00:17.0: reg 0x1c: [io  0x5040-0x5043]
[    0.750752] pci 0000:00:17.0: reg 0x20: [io  0x5020-0x503f]
[    0.750757] pci 0000:00:17.0: reg 0x24: [mem 0x63239000-0x632397ff]
[    0.750789] pci 0000:00:17.0: PME# supported from D3hot
[    0.751233] pci 0000:00:1b.0: [8086:a342] type 01 class 0x060400
[    0.751301] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.751324] pci 0000:00:1b.0: PTM enabled (root), 4ns granularity
[    0.751893] pci 0000:00:1b.3: [8086:a343] type 01 class 0x060400
[    0.751962] pci 0000:00:1b.3: PME# supported from D0 D3hot D3cold
[    0.751985] pci 0000:00:1b.3: PTM enabled (root), 4ns granularity
[    0.752543] pci 0000:00:1b.4: [8086:a32c] type 01 class 0x060400
[    0.752611] pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
[    0.752634] pci 0000:00:1b.4: PTM enabled (root), 4ns granularity
[    0.753210] pci 0000:00:1c.0: [8086:a33c] type 01 class 0x060400
[    0.753278] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.753301] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
[    0.753905] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[    0.753975] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.754569] pci 0000:00:1f.0: [8086:a304] type 00 class 0x060100
[    0.754925] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[    0.754958] pci 0000:00:1f.3: reg 0x10: [mem 0x63230000-0x63233fff 64bit]
[    0.755005] pci 0000:00:1f.3: reg 0x20: [mem 0x63100000-0x631fffff 64bit]
[    0.755082] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.755985] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[    0.756008] pci 0000:00:1f.4: reg 0x10: [mem 0x63238000-0x632380ff 64bit]
[    0.756034] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.756241] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[    0.756254] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.756351] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000
[    0.756376] pci 0000:00:1f.6: reg 0x10: [mem 0x63200000-0x6321ffff]
[    0.756517] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.756602] pci 0000:01:00.0: [10de:1c03] type 00 class 0x030000
[    0.756612] pci 0000:01:00.0: reg 0x10: [mem 0x66000000-0x66ffffff]
[    0.756620] pci 0000:01:00.0: reg 0x14: [mem 0x50000000-0x5fffffff 64bit pref]
[    0.756629] pci 0000:01:00.0: reg 0x1c: [mem 0x64000000-0x65ffffff 64bit pref]
[    0.756634] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.756640] pci 0000:01:00.0: reg 0x30: [mem 0x67000000-0x6707ffff pref]
[    0.756657] pci 0000:01:00.0: BAR 3: assigned to efifb
[    0.756660] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.756728] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.756779] pci 0000:01:00.1: [10de:10f1] type 00 class 0x040300
[    0.756789] pci 0000:01:00.1: reg 0x10: [mem 0x67080000-0x67083fff]
[    0.756899] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.756900] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.756902] pci 0000:00:01.0:   bridge window [mem 0x64000000-0x670fffff]
[    0.756904] pci 0000:00:01.0:   bridge window [mem 0x50000000-0x5fffffff 64bit pref]
[    0.756994] pci 0000:02:00.0: [1415:c158] type 00 class 0x070002
[    0.757009] pci 0000:02:00.0: reg 0x10: [mem 0x67600000-0x67603fff]
[    0.757017] pci 0000:02:00.0: reg 0x14: [mem 0x67400000-0x675fffff]
[    0.757024] pci 0000:02:00.0: reg 0x18: [mem 0x67200000-0x673fffff]
[    0.757113] pci 0000:02:00.0: supports D1 D2
[    0.757114] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.757195] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.757198] pci 0000:00:1b.0:   bridge window [mem 0x67200000-0x676fffff]
[    0.757314] pci 0000:03:00.0: [8086:08b1] type 00 class 0x028000
[    0.757347] pci 0000:03:00.0: reg 0x10: [mem 0x67900000-0x67901fff 64bit]
[    0.757519] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.757849] pci 0000:00:1b.3: PCI bridge to [bus 03]
[    0.757852] pci 0000:00:1b.3:   bridge window [mem 0x67900000-0x679fffff]
[    0.757957] pci 0000:04:00.0: [1987:5012] type 00 class 0x010802
[    0.758004] pci 0000:04:00.0: reg 0x10: [mem 0x67800000-0x67803fff 64bit]
[    0.758469] pci 0000:00:1b.4: PCI bridge to [bus 04]
[    0.758472] pci 0000:00:1b.4:   bridge window [mem 0x67800000-0x678fffff]
[    0.758560] pci 0000:05:00.0: [10de:10c5] type 00 class 0x030000
[    0.758573] pci 0000:05:00.0: reg 0x10: [mem 0x62000000-0x62ffffff]
[    0.758583] pci 0000:05:00.0: reg 0x14: [mem 0x40000000-0x4fffffff 64bit pref]
[    0.758593] pci 0000:05:00.0: reg 0x1c: [mem 0x60000000-0x61ffffff 64bit pref]
[    0.758600] pci 0000:05:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.758606] pci 0000:05:00.0: reg 0x30: [mem 0x63000000-0x6307ffff pref]
[    0.758613] pci 0000:05:00.0: enabling Extended Tags
[    0.758710] pci 0000:05:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:1c.0 (capable of 32.000 Gb/s with 2.5 GT/s PCIe x16 link)
[    0.758760] pci 0000:05:00.1: [10de:0be3] type 00 class 0x040300
[    0.758773] pci 0000:05:00.1: reg 0x10: [mem 0x63080000-0x63083fff]
[    0.758811] pci 0000:05:00.1: enabling Extended Tags
[    0.758908] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    0.758910] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.758912] pci 0000:00:1c.0:   bridge window [mem 0x60000000-0x630fffff]
[    0.758916] pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x4fffffff 64bit pref]
[    0.758995] acpiphp: Slot [1] registered
[    0.759004] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.760406] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.760434] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.760460] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.760486] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.760512] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.760538] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.760564] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.760590] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.765191] iommu: Default domain type: Translated 
[    0.765192] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.765200] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.765200] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.765200] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.765200] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.765200] pci 0000:05:00.0: vgaarb: bridge control possible
[    0.765200] vgaarb: loaded
[    0.765200] SCSI subsystem initialized
[    0.765200] libata version 3.00 loaded.
[    0.765200] ACPI: bus type USB registered
[    0.765200] usbcore: registered new interface driver usbfs
[    0.765200] usbcore: registered new interface driver hub
[    0.765200] usbcore: registered new device driver usb
[    0.765200] pps_core: LinuxPPS API ver. 1 registered
[    0.765200] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.765200] PTP clock support registered
[    0.765200] EDAC MC: Ver: 3.0.0
[    0.765200] Registered efivars operations
[    0.765200] NetLabel: Initializing
[    0.765200] NetLabel:  domain hash size = 128
[    0.765200] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.765200] NetLabel:  unlabeled traffic allowed by default
[    0.765200] mctp: management component transport protocol core
[    0.765200] NET: Registered PF_MCTP protocol family
[    0.765200] PCI: Using ACPI for IRQ routing
[    0.808136] PCI: pci_cache_line_size set to 64 bytes
[    0.808212] e820: reserve RAM buffer [mem 0x0005f000-0x0005ffff]
[    0.808214] e820: reserve RAM buffer [mem 0x32a33000-0x33ffffff]
[    0.808215] e820: reserve RAM buffer [mem 0x39b5b000-0x3bffffff]
[    0.808216] e820: reserve RAM buffer [mem 0x3c097000-0x3fffffff]
[    0.808217] e820: reserve RAM buffer [mem 0x3da94000-0x3fffffff]
[    0.808217] e820: reserve RAM buffer [mem 0x3e059000-0x3fffffff]
[    0.808218] e820: reserve RAM buffer [mem 0x3ef00000-0x3fffffff]
[    0.808219] e820: reserve RAM buffer [mem 0x2be000000-0x2bfffffff]
[    0.808222] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.808222] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.810113] clocksource: Switched to clocksource tsc-early
[    0.815453] VFS: Disk quotas dquot_6.6.0
[    0.815461] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.815516] pnp: PnP ACPI init
[    0.815778] system 00:00: [io  0x0a00-0x0a2f] has been reserved
[    0.815781] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    0.815782] system 00:00: [io  0x0a40-0x0a4f] has been reserved
[    0.816351] pnp 00:01: [dma 0 disabled]
[    0.816457] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.816458] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.816540] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.816692] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.816694] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.816695] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.816696] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.816697] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.816698] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.816699] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.816700] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.816892] system 00:06: [io  0x1800-0x18fe] could not be reserved
[    0.816893] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.816895] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    0.816896] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.816897] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.816898] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.816899] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.817136] system 00:07: [io  0x2000-0x20fe] has been reserved
[    0.818607] pnp: PnP ACPI: found 9 devices
[    0.823764] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.823807] NET: Registered PF_INET protocol family
[    0.823878] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.824587] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.824648] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.824742] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.824794] TCP: Hash tables configured (established 65536 bind 65536)
[    0.824835] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.824857] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.824875] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.824902] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.824905] NET: Registered PF_XDP protocol family
[    0.824911] pci 0000:00:1d.0: bridge window [io  0x1000-0x0fff] to [bus 06] add_size 1000
[    0.824914] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[    0.824916] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000
[    0.824922] pci 0000:00:1d.0: BAR 14: assigned [mem 0x63300000-0x634fffff]
[    0.824926] pci 0000:00:1d.0: BAR 15: assigned [mem 0x63500000-0x636fffff 64bit pref]
[    0.824928] pci 0000:00:1d.0: BAR 13: assigned [io  0x6000-0x6fff]
[    0.824930] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.824932] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.824934] pci 0000:00:01.0:   bridge window [mem 0x64000000-0x670fffff]
[    0.824935] pci 0000:00:01.0:   bridge window [mem 0x50000000-0x5fffffff 64bit pref]
[    0.824938] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.824945] pci 0000:00:1b.0:   bridge window [mem 0x67200000-0x676fffff]
[    0.824949] pci 0000:00:1b.3: PCI bridge to [bus 03]
[    0.824952] pci 0000:00:1b.3:   bridge window [mem 0x67900000-0x679fffff]
[    0.824956] pci 0000:00:1b.4: PCI bridge to [bus 04]
[    0.824959] pci 0000:00:1b.4:   bridge window [mem 0x67800000-0x678fffff]
[    0.824964] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    0.824965] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.824967] pci 0000:00:1c.0:   bridge window [mem 0x60000000-0x630fffff]
[    0.824969] pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x4fffffff 64bit pref]
[    0.824973] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.824975] pci 0000:00:1d.0:   bridge window [io  0x6000-0x6fff]
[    0.824978] pci 0000:00:1d.0:   bridge window [mem 0x63300000-0x634fffff]
[    0.824980] pci 0000:00:1d.0:   bridge window [mem 0x63500000-0x636fffff 64bit pref]
[    0.824985] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.824986] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.824987] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.824988] pci_bus 0000:00: resource 7 [mem 0x40000000-0xdfffffff window]
[    0.824988] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[    0.824989] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.824990] pci_bus 0000:01: resource 1 [mem 0x64000000-0x670fffff]
[    0.824991] pci_bus 0000:01: resource 2 [mem 0x50000000-0x5fffffff 64bit pref]
[    0.824992] pci_bus 0000:02: resource 1 [mem 0x67200000-0x676fffff]
[    0.824993] pci_bus 0000:03: resource 1 [mem 0x67900000-0x679fffff]
[    0.824994] pci_bus 0000:04: resource 1 [mem 0x67800000-0x678fffff]
[    0.824994] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
[    0.824995] pci_bus 0000:05: resource 1 [mem 0x60000000-0x630fffff]
[    0.824996] pci_bus 0000:05: resource 2 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.824997] pci_bus 0000:06: resource 0 [io  0x6000-0x6fff]
[    0.824998] pci_bus 0000:06: resource 1 [mem 0x63300000-0x634fffff]
[    0.824999] pci_bus 0000:06: resource 2 [mem 0x63500000-0x636fffff 64bit pref]
[    0.826313] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.826378] pci 0000:05:00.1: D0 power state depends on 0000:05:00.0
[    0.826420] PCI: CLS 64 bytes, default 64
[    0.826434] DMAR: No ATSR found
[    0.826435] DMAR: No SATC found
[    0.826436] DMAR: dmar0: Using Queued invalidation
[    0.826457] Trying to unpack rootfs image as initramfs...
[    0.826462] pci 0000:00:00.0: Adding to iommu group 0
[    0.826470] pci 0000:00:01.0: Adding to iommu group 1
[    0.826478] pci 0000:00:12.0: Adding to iommu group 2
[    0.826487] pci 0000:00:14.0: Adding to iommu group 3
[    0.826492] pci 0000:00:14.2: Adding to iommu group 3
[    0.826499] pci 0000:00:16.0: Adding to iommu group 4
[    0.826505] pci 0000:00:17.0: Adding to iommu group 5
[    0.826516] pci 0000:00:1b.0: Adding to iommu group 6
[    0.826523] pci 0000:00:1b.3: Adding to iommu group 7
[    0.826529] pci 0000:00:1b.4: Adding to iommu group 8
[    0.826536] pci 0000:00:1c.0: Adding to iommu group 9
[    0.826544] pci 0000:00:1d.0: Adding to iommu group 10
[    0.826559] pci 0000:00:1f.0: Adding to iommu group 11
[    0.826565] pci 0000:00:1f.3: Adding to iommu group 11
[    0.826571] pci 0000:00:1f.4: Adding to iommu group 11
[    0.826576] pci 0000:00:1f.5: Adding to iommu group 11
[    0.826582] pci 0000:00:1f.6: Adding to iommu group 11
[    0.826585] pci 0000:01:00.0: Adding to iommu group 1
[    0.826587] pci 0000:01:00.1: Adding to iommu group 1
[    0.826598] pci 0000:02:00.0: Adding to iommu group 12
[    0.826604] pci 0000:03:00.0: Adding to iommu group 13
[    0.826610] pci 0000:04:00.0: Adding to iommu group 14
[    0.826620] pci 0000:05:00.0: Adding to iommu group 15
[    0.826634] pci 0000:05:00.1: Adding to iommu group 15
[    0.827297] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    0.827301] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.827301] software IO TLB: mapped [mem 0x000000002cd7a000-0x0000000030d7a000] (64MB)
[    0.837153] Initialise system trusted keyrings
[    0.837163] Key type blacklist registered
[    0.837186] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.837917] zbud: loaded
[    0.843639] Key type asymmetric registered
[    0.843641] Asymmetric key parser 'x509' registered
[    0.860266] Freeing initrd memory: 13996K
[    0.861872] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    0.861890] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.861911] io scheduler mq-deadline registered
[    0.861912] io scheduler kyber registered
[    0.861931] io scheduler bfq registered
[    0.864453] pcieport 0000:00:1b.0: AER: enabled with IRQ 122
[    0.864479] pcieport 0000:00:1b.0: DPC: enabled with IRQ 122
[    0.864480] pcieport 0000:00:1b.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.864660] pcieport 0000:00:1b.3: AER: enabled with IRQ 123
[    0.864688] pcieport 0000:00:1b.3: DPC: enabled with IRQ 123
[    0.864689] pcieport 0000:00:1b.3: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.864866] pcieport 0000:00:1b.4: AER: enabled with IRQ 124
[    0.864890] pcieport 0000:00:1b.4: DPC: enabled with IRQ 124
[    0.864891] pcieport 0000:00:1b.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.865065] pcieport 0000:00:1c.0: AER: enabled with IRQ 125
[    0.865091] pcieport 0000:00:1c.0: DPC: enabled with IRQ 125
[    0.865092] pcieport 0000:00:1c.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.865227] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.865459] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.865470] ACPI: button: Sleep Button [SLPB]
[    0.865498] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.865505] ACPI: button: Power Button [PWRB]
[    0.865520] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.866801] ACPI: button: Power Button [PWRF]
[    0.866924] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PR00._CPC], AE_NOT_FOUND (20211217/psargs-330)
[    0.866929] ACPI Error: Aborting method \_SB.PR01._CPC due to previous error (AE_NOT_FOUND) (20211217/psparse-529)
[    0.866953] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PR00._CPC], AE_NOT_FOUND (20211217/psargs-330)
[    0.866955] ACPI Error: Aborting method \_SB.PR02._CPC due to previous error (AE_NOT_FOUND) (20211217/psparse-529)
[    0.866976] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PR00._CPC], AE_NOT_FOUND (20211217/psargs-330)
[    0.866978] ACPI Error: Aborting method \_SB.PR03._CPC due to previous error (AE_NOT_FOUND) (20211217/psparse-529)
[    1.830191] tsc: Refined TSC clocksource calibration: 3599.992 MHz
[    1.830194] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e44bc06cb, max_idle_ns: 440795255742 ns
[    1.830230] clocksource: Switched to clocksource tsc
[    2.898818] ACPI: \_TZ_.TZ10: Invalid passive threshold
[    2.899037] thermal LNXTHERM:00: registered as thermal_zone0
[    2.899038] ACPI: thermal: Thermal Zone [TZ10] (17 C)
[    2.899268] thermal LNXTHERM:01: registered as thermal_zone1
[    2.899269] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    2.899426] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.899875] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.902079] serial 0000:02:00.0: enabling device (0000 -> 0002)
[    2.902219] 0000:02:00.0: ttyS4 at MMIO 0x67601000 (irq = 18, base_baud = 3906250) is a 16550A
[    2.903262] 0000:02:00.0: ttyS5 at MMIO 0x67601200 (irq = 18, base_baud = 3906250) is a 16550A
[    2.904483] Non-volatile memory driver v1.3
[    2.904484] Linux agpgart interface v0.103
[    2.904485] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    2.904549] ACPI: bus type drm_connector registered
[    2.905880] ahci 0000:00:17.0: version 3.0
[    2.916184] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    2.916186] ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds apst 
[    2.963910] scsi host0: ahci
[    2.964227] scsi host1: ahci
[    2.964435] scsi host2: ahci
[    2.964570] scsi host3: ahci
[    2.964661] scsi host4: ahci
[    2.964732] scsi host5: ahci
[    2.964763] ata1: SATA max UDMA/133 abar m2048@0x63239000 port 0x63239100 irq 127
[    2.964765] ata2: SATA max UDMA/133 abar m2048@0x63239000 port 0x63239180 irq 127
[    2.964766] ata3: SATA max UDMA/133 abar m2048@0x63239000 port 0x63239200 irq 127
[    2.964768] ata4: SATA max UDMA/133 abar m2048@0x63239000 port 0x63239280 irq 127
[    2.964769] ata5: SATA max UDMA/133 abar m2048@0x63239000 port 0x63239300 irq 127
[    2.964770] ata6: SATA max UDMA/133 abar m2048@0x63239000 port 0x63239380 irq 127
[    2.964817] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.964819] ehci-pci: EHCI PCI platform driver
[    2.964824] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.964825] ohci-pci: OHCI PCI platform driver
[    2.964829] uhci_hcd: USB Universal Host Controller Interface driver
[    2.964863] usbcore: registered new interface driver usbserial_generic
[    2.964879] usbserial: USB Serial support registered for generic
[    2.964944] rtc_cmos 00:03: RTC can wake from S4
[    2.965755] rtc_cmos 00:03: registered as rtc0
[    2.965930] rtc_cmos 00:03: setting system clock to 2022-05-23T18:53:06 UTC (1653331986)
[    2.965938] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.965985] intel_pstate: Intel P-state driver initializing
[    2.966095] intel_pstate: Disabling energy efficiency optimization
[    2.966095] intel_pstate: HWP enabled
[    2.966111] ledtrig-cpu: registered to indicate activity on CPUs
[    2.966268] efifb: probing for efifb
[    2.966276] efifb: showing boot graphics
[    2.967344] efifb: framebuffer at 0x65000000, using 3072k, total 3072k
[    2.967346] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    2.967347] efifb: scrolling: redraw
[    2.967347] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.967394] fbcon: Deferring console take-over
[    2.967395] fb0: EFI VGA frame buffer device
[    2.967411] hid: raw HID events driver (C) Jiri Kosina
[    2.967445] intel_pmc_core INT33A1:00:  initialized
[    2.967487] drop_monitor: Initializing network drop monitor service
[    2.967527] Initializing XFRM netlink socket
[    2.967581] NET: Registered PF_INET6 protocol family
[    2.969515] Segment Routing with IPv6
[    2.969516] RPL Segment Routing with IPv6
[    2.969520] In-situ OAM (IOAM) with IPv6
[    2.969532] NET: Registered PF_PACKET protocol family
[    2.969707] microcode: sig=0x906eb, pf=0x2, revision=0xf0
[    2.969733] microcode: Microcode Update Driver: v2.2.
[    2.969736] IPI shorthand broadcast: enabled
[    2.969741] sched_clock: Marking stable (2969109050, 564831)->(2971550674, -1876793)
[    2.969845] registered taskstats version 1
[    2.969884] Loading compiled-in X.509 certificates
[    2.972168] Loaded X.509 cert 'Build time autogenerated kernel key: 7b1f7772fe6b819d806548881a392e077a32804c'
[    2.972326] zswap: loaded using pool lz4/z3fold
[    2.972429] Key type ._fscrypt registered
[    2.972430] Key type .fscrypt registered
[    2.972431] Key type fscrypt-provisioning registered
[    2.973170] PM:   Magic number: 6:970:898
[    2.973290] RAS: Correctable Errors collector initialized.
[    3.277217] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.277904] ata3.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133
[    3.278334] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.279246] ata3.00: configured for UDMA/133
[    3.280623] ata2: SATA link down (SStatus 0 SControl 300)
[    3.280653] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.280708] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.280751] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.280779] ata6: SATA link down (SStatus 0 SControl 300)
[    3.281375] ata1.00: ATA-10: WDC WD10EZEX-08WN4A0, 02.01A02, max UDMA/100
[    3.282620] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.282631] ata1.00: Features: NCQ-prio
[    3.284680] ata1.00: configured for UDMA/100
[    3.285063] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08W 1A02 PQ: 0 ANSI: 5
[    3.286147] scsi 2:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68E 0A82 PQ: 0 ANSI: 5
[    3.286211] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.286219] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.286270] sd 0:0:0:0: [sda] Write Protect is off
[    3.286279] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.286386] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.286778] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    3.286787] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    3.286815] sd 2:0:0:0: [sdb] Write Protect is off
[    3.286821] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.286919] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.287873] ata5.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[    3.288411] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.296097] ata5.00: configured for UDMA/133
[    3.329240] ata4.00: ATA-8: TOSHIBA MK2561GSYN, MH000D, max UDMA/100
[    3.329410] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.330719] ata4.00: configured for UDMA/100
[    3.331066] scsi 3:0:0:0: Direct-Access     ATA      TOSHIBA MK2561GS 0D   PQ: 0 ANSI: 5
[    3.331917] scsi 4:0:0:0: Direct-Access     ATA      WDC WD20EARX-00P AB51 PQ: 0 ANSI: 5
[    3.331933] sd 3:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    3.331973] sd 3:0:0:0: [sdc] Write Protect is off
[    3.331982] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    3.332029] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.332771] sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    3.332777] sd 4:0:0:0: [sdd] 4096-byte physical blocks
[    3.332802] sd 4:0:0:0: [sdd] Write Protect is off
[    3.332811] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    3.332851] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.364170]  sdb: sdb1
[    3.365787]  sda: sda1 sda2
[    3.380664] sd 2:0:0:0: [sdb] Attached SCSI disk
[    3.380879] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.393072]  sdc: sdc1
[    3.408593]  sdd: sdd1
[    3.410786] sd 3:0:0:0: [sdc] Attached SCSI disk
[    3.427497] sd 4:0:0:0: [sdd] Attached SCSI disk
[    3.431521] Freeing unused decrypted memory: 2036K
[    3.432224] Freeing unused kernel image (initmem) memory: 1788K
[    3.432326] Write protecting the kernel read-only data: 28672k
[    3.433519] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    3.434173] Freeing unused kernel image (rodata/data gap) memory: 1348K
[    3.508199] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.508202] rodata_test: all tests were successful
[    3.508204] x86/mm: Checking user space page tables
[    3.543402] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.543414] Run /init as init process
[    3.543414]   with arguments:
[    3.543415]     /init
[    3.543417]   with environment:
[    3.543417]     HOME=/
[    3.543418]     TERM=linux
[    3.543418]     BOOT_IMAGE=/vmlinuz-linux
[    3.588279] fbcon: Taking over console
[    3.588324] Console: switching to colour frame buffer device 128x48
[    3.604055] VFIO - User Level meta-driver version: 0.3
[    3.617205] vfio-pci 0000:05:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
[    3.633792] vfio_pci: add [10de:10c5[ffffffff:ffffffff]] class 0x000000/00000000
[    3.650221] vfio_pci: add [10de:0be3[ffffffff:ffffffff]] class 0x000000/00000000
[    3.650242] vfio_pci: add [18a2:0020[ffffffff:ffffffff]] class 0x000000/00000000
[    3.650255] vfio_pci: add [18a2:0024[ffffffff:ffffffff]] class 0x000000/00000000
[    3.757955] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.757961] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    3.759050] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    3.759181] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
[    3.759182] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.759184] usb usb1: Product: xHCI Host Controller
[    3.759184] usb usb1: Manufacturer: Linux 5.17.9-arch1-1 xhci-hcd
[    3.759185] usb usb1: SerialNumber: 0000:00:14.0
[    3.759321] hub 1-0:1.0: USB hub found
[    3.759336] hub 1-0:1.0: 16 ports detected
[    3.760834] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.760837] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    3.760839] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    3.760861] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17
[    3.760863] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.760864] usb usb2: Product: xHCI Host Controller
[    3.760865] usb usb2: Manufacturer: Linux 5.17.9-arch1-1 xhci-hcd
[    3.760866] usb usb2: SerialNumber: 0000:00:14.0
[    3.760920] hub 2-0:1.0: USB hub found
[    3.760930] hub 2-0:1.0: 8 ports detected
[    3.765577] nvme nvme0: pci function 0000:04:00.0
[    3.770100] nvme nvme0: missing or invalid SUBNQN field.
[    3.770116] nvme nvme0: Shutdown timeout set to 10 seconds
[    3.771550] nvme nvme0: 4/0/0 default/read/poll queues
[    3.773051]  nvme0n1: p1 p2 p3
[    4.010158] usb 1-7: new high-speed USB device number 2 using xhci_hcd
[    4.152308] usb 1-7: New USB device found, idVendor=058f, idProduct=6377, bcdDevice= 1.00
[    4.152320] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.152326] usb 1-7: Product: Mass Storage Device
[    4.152331] usb 1-7: Manufacturer: Generic
[    4.152334] usb 1-7: SerialNumber: 920321111113
[    4.170241] usb-storage 1-7:1.0: USB Mass Storage device detected
[    4.170737] scsi host6: usb-storage 1-7:1.0
[    4.170939] usbcore: registered new interface driver usb-storage
[    4.184102] usbcore: registered new interface driver uas
[    4.265950] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Quota mode: none.
[    4.276781] usb 1-9: new full-speed USB device number 3 using xhci_hcd
[    4.418143] systemd[1]: systemd 251-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    4.418150] systemd[1]: Detected architecture x86-64.
[    4.418672] systemd[1]: Hostname set to <Hannes-GUSCHTAV>.
[    4.423368] usb 1-9: New USB device found, idVendor=0d8c, idProduct=0014, bcdDevice= 1.00
[    4.423372] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.423374] usb 1-9: Product: USB Audio Device
[    4.423375] usb 1-9: Manufacturer: C-Media Electronics Inc.
[    4.546784] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[    4.593780] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[    4.597664] systemd[1]: Queued start job for default target Graphical Interface.
[    4.598468] systemd[1]: Created slice Virtual Machine and Container Slice.
[    4.598751] systemd[1]: Created slice Slice /system/getty.
[    4.598926] systemd[1]: Created slice Slice /system/modprobe.
[    4.599080] systemd[1]: Created slice Slice /system/syslog-ng.
[    4.599246] systemd[1]: Created slice Slice /system/systemd-fsck.
[    4.599359] systemd[1]: Created slice User and Session Slice.
[    4.599400] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.599429] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.599511] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.599533] systemd[1]: Reached target Local Encrypted Volumes.
[    4.599540] systemd[1]: Reached target Login Prompts.
[    4.599549] systemd[1]: Reached target Local Integrity Protected Volumes.
[    4.599563] systemd[1]: Reached target Remote File Systems.
[    4.599568] systemd[1]: Reached target Slice Units.
[    4.599581] systemd[1]: Reached target Local Verity Protected Volumes.
[    4.599623] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.599810] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.600458] systemd[1]: Listening on Process Core Dump Socket.
[    4.600558] systemd[1]: Listening on Journal Audit Socket.
[    4.600625] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.600688] systemd[1]: Listening on Journal Socket.
[    4.600851] systemd[1]: Listening on udev Control Socket.
[    4.600901] systemd[1]: Listening on udev Kernel Socket.
[    4.601380] systemd[1]: Mounting Huge Pages File System...
[    4.601818] systemd[1]: Mounting POSIX Message Queue File System...
[    4.602301] systemd[1]: Mounting Kernel Debug File System...
[    4.602762] systemd[1]: Mounting Kernel Trace File System...
[    4.603325] systemd[1]: Starting Create List of Static Device Nodes...
[    4.603890] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.604457] systemd[1]: Starting Load Kernel Module configfs...
[    4.604956] systemd[1]: Starting Load Kernel Module drm...
[    4.605456] systemd[1]: Starting Load Kernel Module fuse...
[    4.605510] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[    4.606328] systemd[1]: Starting Load Kernel Modules...
[    4.606792] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.606834] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[    4.607322] systemd[1]: Starting Coldplug All udev Devices...
[    4.608358] systemd[1]: Mounted Huge Pages File System.
[    4.608429] systemd[1]: Mounted POSIX Message Queue File System.
[    4.608483] systemd[1]: Mounted Kernel Debug File System.
[    4.608535] systemd[1]: Mounted Kernel Trace File System.
[    4.608655] systemd[1]: Finished Create List of Static Device Nodes.
[    4.608840] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    4.608911] systemd[1]: Finished Load Kernel Module configfs.
[    4.609057] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    4.609125] systemd[1]: Finished Load Kernel Module drm.
[    4.609705] systemd[1]: Mounting Kernel Configuration File System...
[    4.610892] systemd[1]: Mounted Kernel Configuration File System.
[    4.611082] EXT4-fs (nvme0n1p3): re-mounted. Quota mode: none.
[    4.612590] fuse: init (API version 7.36)
[    4.613290] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    4.613379] systemd[1]: Finished Load Kernel Module fuse.
[    4.613692] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.614307] systemd[1]: Mounting FUSE Control File System...
[    4.614351] systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
[    4.614959] systemd[1]: Rebuild Hardware Database was skipped because all trigger condition checks failed.
[    4.615549] systemd[1]: Starting Load/Save Random Seed...
[    4.616070] systemd[1]: Starting Create System Users...
[    4.616564] systemd[1]: Mounted FUSE Control File System.
[    4.621041] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.621930] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    4.622044] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    4.622063] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    4.625083] systemd[1]: Finished Load/Save Random Seed.
[    4.625169] systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes).
[    4.631065] device-mapper: uevent: version 1.0.3
[    4.631165] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    4.635155] systemd[1]: Finished Create System Users.
[    4.635879] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.637764] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[    4.655365] systemd[1]: Finished Create Static Device Nodes in /dev.
[    4.655436] systemd[1]: Reached target Preparation for Local File Systems.
[    4.655462] systemd[1]: Virtual Machine and Container Storage (Compatibility) was skipped because of a failed condition check (ConditionPathExists=/var/lib/machines.raw).
[    4.655475] systemd[1]: Entropy Daemon based on the HAVEGE algorithm was skipped because of a failed condition check (ConditionKernelVersion=<5.6).
[    4.656428] systemd[1]: Starting Journal Service...
[    4.657337] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    4.685605] systemd[1]: Finished Coldplug All udev Devices.
[    4.685646] audit: type=1130 audit(1653331988.216:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.687090] usb 1-10: New USB device found, idVendor=0451, idProduct=2046, bcdDevice= 1.25
[    4.687093] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.687672] hub 1-10:1.0: USB hub found
[    4.687761] hub 1-10:1.0: 4 ports detected
[    4.693393] systemd[1]: Started Journal Service.
[    4.693579] audit: type=1130 audit(1653331988.226:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.697192] systemd-journald[258]: Received client request to flush runtime journal.
[    4.707138] audit: type=1130 audit(1653331988.239:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.729925] nvidia: loading out-of-tree module taints kernel.
[    4.729935] nvidia: module license 'NVIDIA' taints kernel.
[    4.729935] Disabling lock debugging due to kernel taint
[    4.751284] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    4.765634] nvidia-nvlink: Nvlink Core is being initialized, major device number 234
[    4.765640] NVRM: The NVIDIA GeForce 405 GPU installed in this system is
               NVRM:  supported through the NVIDIA 340.xx Legacy drivers. Please
               NVRM:  visit [url]http://www.nvidia.com/object/unix.html[/url] for more
               NVRM:  information.  The 510.73.05 NVIDIA driver will ignore
               NVRM:  this GPU.  Continuing probe...
[    4.769863] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    4.795690] audit: type=1130 audit(1653331988.326:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.810098] usb 1-12: new high-speed USB device number 5 using xhci_hcd
[    4.860160] ata3.00: exception Emask 0x10 SAct 0x800000 SErr 0x280100 action 0x6 frozen
[    4.860165] ata3.00: irq_stat 0x08000000, interface fatal error
[    4.860166] ata3: SError: { UnrecovData 10B8B BadCRC }
[    4.860169] ata3.00: failed command: READ FPDMA QUEUED
[    4.860170] ata3.00: cmd 60/00:b8:00:84:e0/02:00:e8:00:00/40 tag 23 ncq dma 262144 in
                        res 40/00:bc:00:84:e0/00:00:e8:00:00/40 Emask 0x10 (ATA bus error)
[    4.860174] ata3.00: status: { DRDY }
[    4.860178] ata3: hard resetting link
[    4.860267] Adding 8388604k swap on /dev/nvme0n1p2.  Priority:-2 extents:1 across:8388604k SSFS
[    4.880864] audit: type=1130 audit(1653331988.413:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-41EF\x2d28F8 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.886548] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  510.73.05  Sat May  7 05:30:26 UTC 2022
[    4.906006] nvidia_uvm: module uses symbols from proprietary module nvidia, inheriting taint.
[    4.980426] nvidia-uvm: Loaded the UVM driver, major device number 510.
[    4.996382] usb 1-12: New USB device found, idVendor=0c45, idProduct=6340, bcdDevice= 0.00
[    4.996388] usb 1-12: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    4.996390] usb 1-12: Product: Trust Webcam
[    4.996392] usb 1-12: Manufacturer: Trust Webcam
[    4.996393] usb 1-12: SerialNumber: 20131107
[    5.024962] usb 1-10.1: new full-speed USB device number 6 using xhci_hcd
[    5.057804] vboxdrv: Found 4 processor cores
[    5.059570] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    5.060073] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    5.080407] vboxdrv: TSC mode is Invariant, tentative frequency 3599942574 Hz
[    5.080415] vboxdrv: Successfully loaded version 6.1.34 r150636 (interface 0x00320000)
[    5.115480] usb 1-10.1: New USB device found, idVendor=2575, idProduct=0001, bcdDevice=31.00
[    5.115493] usb 1-10.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.115499] usb 1-10.1: Product: CoolTouch® System
[    5.115503] usb 1-10.1: Manufacturer: Weida Hi-Tech
[    5.115673] usb 1-10.1: rejected 1 configuration due to insufficient available bus power
[    5.115679] usb 1-10.1: no configuration chosen from 1 choice
[    5.137455] VBoxNetAdp: Successfully started.
[    5.164987] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  510.73.05  Sat May  7 05:21:20 UTC 2022
[    5.168125] VBoxNetFlt: Successfully started.
[    5.169984] EDAC ie31200: No ECC support
[    5.170437] EDAC ie31200: No ECC support
[    5.172452] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    5.172460] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[    5.176919] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.178180] ata3.00: configured for UDMA/133
[    5.178212] sd 2:0:0:0: [sdb] tag#23 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[    5.178220] sd 2:0:0:0: [sdb] tag#23 Sense Key : Illegal Request [current] 
[    5.178226] sd 2:0:0:0: [sdb] tag#23 Add. Sense: Unaligned write command
[    5.178232] sd 2:0:0:0: [sdb] tag#23 CDB: Read(10) 28 00 e8 e0 84 00 00 02 00 00
[    5.178235] I/O error, dev sdb, sector 3907027968 op 0x0:(READ) flags 0x80700 phys_seg 64 prio class 0
[    5.178273] ata3: EH complete
[    5.190726] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    5.191235] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    5.191712] scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    5.192206] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    5.192663] scsi 6:0:0:0: Attached scsi generic sg4 type 0
[    5.192966] scsi 6:0:0:1: Attached scsi generic sg5 type 0
[    5.193211] scsi 6:0:0:2: Attached scsi generic sg6 type 0
[    5.194052] sd 6:0:0:1: [sde] Media removed, stopped polling
[    5.194488] sd 6:0:0:2: [sdf] Media removed, stopped polling
[    5.195238] sd 6:0:0:3: Attached scsi generic sg7 type 0
[    5.195635] sd 6:0:0:3: [sdh] Media removed, stopped polling
[    5.196551] sd 6:0:0:0: [sdg] Media removed, stopped polling
[    5.196972] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[    5.198232] sd 6:0:0:1: [sde] Attached SCSI removable disk
[    5.200307] sd 6:0:0:0: [sdg] Attached SCSI removable disk
[    5.201541] sd 6:0:0:3: [sdh] Attached SCSI removable disk
[    5.216747] Guest personality initialized and is inactive
[    5.216851] VMCI host device registered (name=vmci, major=10, minor=121)
[    5.216857] Initialized host personality
[    5.232437] audit: type=1130 audit(1653331988.759:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.240137] usb 1-14: new full-speed USB device number 7 using xhci_hcd
[    5.254510] audit: type=1130 audit(1653331988.786:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.301427] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    5.381292] usb 1-14: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
[    5.381306] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.389152] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    5.394433] e1000e: Intel(R) PRO/1000 Network Driver
[    5.394436] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    5.394839] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    5.417724] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    5.417818] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    5.419729] i2c i2c-0: 1/4 memory slots populated (from DMI)
[    5.421601] i2c i2c-0: Successfully instantiated SPD at 0x52
[    5.453429] usb 1-10.2: new full-speed USB device number 8 using xhci_hcd
[    5.473987] intel-spi 0000:00:1f.5: mx25l12805d (16384 Kbytes)
[    5.478315] Creating 1 MTD partitions on "0000:00:1f.5":
[    5.478317] 0x000000000000-0x000001000000 : "BIOS"
[    5.493339] mc: Linux media interface: v0.10
[    5.500269] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer
[    5.500271] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.500272] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.500309] input: C-Media Electronics Inc. USB Audio Device as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.3/0003:0D8C:0014.0001/input/input4
[    5.547001] usb 1-10.2: not running at top speed; connect to a high speed hub
[    5.548681] usb 1-10.2: config 1 interface 1 altsetting 3 endpoint 0x85 has invalid maxpacket 1024, setting to 1023
[    5.548684] usb 1-10.2: config 1 interface 1 altsetting 4 endpoint 0x85 has invalid maxpacket 2816, setting to 1023
[    5.548685] usb 1-10.2: config 1 interface 1 altsetting 5 endpoint 0x85 has invalid maxpacket 3072, setting to 1023
[    5.548686] usb 1-10.2: config 1 interface 1 altsetting 6 endpoint 0x85 has invalid maxpacket 4948, setting to 1023
[    5.548687] usb 1-10.2: config 1 interface 1 altsetting 7 endpoint 0x85 has invalid maxpacket 5120, setting to 1023
[    5.549054] usb 1-10.2: New USB device found, idVendor=1b3f, idProduct=2247, bcdDevice= 1.00
[    5.549057] usb 1-10.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.549058] usb 1-10.2: Product: WEB CAM
[    5.549059] usb 1-10.2: Manufacturer: WCM_USB
[    5.554057] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.556813] hid-generic 0003:0D8C:0014.0001: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB Audio Device] on usb-0000:00:14.0-9/input3
[    5.556847] usbcore: registered new interface driver usbhid
[    5.556848] usbhid: USB HID core driver
[    5.560110] cryptd: max_cpu_qlen set to 1000
[    5.564337] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.564627] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    5.564630] cfg80211: failed to load regulatory.db
[    5.586810] AVX2 version of gcm_enc/dec engaged.
[    5.586834] AES CTR mode by8 optimization enabled
[    5.594774] snd_hda_intel 0000:01:00.1: Disabling MSI
[    5.594781] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    5.606146] videodev: Linux video capture interface: v2.00
[    5.623426] usb 1-10.3: new full-speed USB device number 9 using xhci_hcd
[    5.644020] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    5.644024] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.644026] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.644027] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.644028] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    5.644028] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.644029] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    5.644030] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    5.644031] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    5.648134] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
[    5.648168] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[    5.648196] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[    5.648223] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[    5.648249] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[    5.648276] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[    5.648303] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[    5.659525] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[    5.661135] usb 1-12: 3:1: cannot get freq at ep 0x84
[    5.683638] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    5.683665] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    5.683688] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    5.683712] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    5.683733] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    5.683755] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    5.683776] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    5.683798] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    5.686368] iTCO_vendor_support: vendor-support=0
[    5.686924] Intel(R) Wireless WiFi driver for Linux
[    5.686967] iwlwifi 0000:03:00.0: enabling device (0000 -> 0002)
[    5.691112] ee1004 0-0052: 512 byte EE1004-compliant SPD EEPROM, read-only
[    5.697382] usb 1-10.2: Warning! Unlikely big volume range (=5120), cval->res is probably wrong.
[    5.697386] usb 1-10.2: [5] FU [Mic Capture Volume] ch = 1, val = 7680/12800/1
[    5.709786] iwlwifi 0000:03:00.0: loaded firmware version 17.3216344376.0 7260-17.ucode op_mode iwlmvm
[    5.715845] usb 1-10.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
[    5.715849] usb 1-10.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.715850] usb 1-10.3: Product: USB Receiver
[    5.715851] usb 1-10.3: Manufacturer: Logitech
[    5.720643] usbcore: registered new interface driver snd-usb-audio
[    5.724025] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.3/1-10.3:1.0/0003:046D:C52B.0002/input/input20
[    5.732262] audit: type=1130 audit(1653331989.263:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.738118] cmedia_hs100b 0003:0D8C:0014.0001: Fixing CMedia HS-100B report descriptor
[    5.738181] input: C-Media Electronics Inc. USB Audio Device as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.3/0003:0D8C:0014.0001/input/input21
[    5.745329] Bluetooth: Core ver 2.22
[    5.745341] NET: Registered PF_BLUETOOTH protocol family
[    5.745342] Bluetooth: HCI device and connection manager initialized
[    5.745345] Bluetooth: HCI socket layer initialized
[    5.745346] Bluetooth: L2CAP socket layer initialized
[    5.745348] Bluetooth: SCO socket layer initialized
[    5.761386] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[    5.773707] audit: type=1130 audit(1653331989.306:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.777669] audit: type=1127 audit(1653331989.309:11): pid=492 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[    5.780570] audit: type=1130 audit(1653331989.313:12): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.790543] audit: type=1130 audit(1653331989.323:13): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.796902] hid-generic 0003:046D:C52B.0002: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-10.3/input0
[    5.798625] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.3/1-10.3:1.1/0003:046D:C52B.0003/input/input22
[    5.799563] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.810322] iwlwifi 0000:03:00.0: Detected Intel(R) Wireless N 7260, REV=0x144
[    5.820748] usb 1-12: Found UVC 1.00 device Trust Webcam (0c45:6340)
[    5.827759] iwlwifi 0000:03:00.0: base HW address: 5c:51:4f:3a:a8:59
[    5.834125] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    5.849354] input: Trust Webcam: Trust Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input26
[    5.853690] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.3/1-10.3:1.1/0003:046D:C52B.0003/input/input23
[    5.853705] cmedia_hs100b 0003:0D8C:0014.0001: input,hidraw1: USB HID v1.00 Device [C-Media Electronics Inc. USB Audio Device] on usb-0000:00:14.0-9/input3
[    5.863984] intel_tcc_cooling: Programmable TCC Offset detected
[    5.865492] usbcore: registered new interface driver btusb
[    5.873074] audit: type=1130 audit(1653331989.403:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.881589] Bluetooth: hci0: Legacy ROM 2.5 revision 8.0 build 2 week 3 2013
[    5.881592] Bluetooth: hci0: Intel device is already patched. patch num: 57
[    5.909999] intel_rapl_common: Found RAPL domain package
[    5.910002] intel_rapl_common: Found RAPL domain core
[    5.910234] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.3/1-10.3:1.1/0003:046D:C52B.0003/input/input24
[    5.910289] hid-generic 0003:046D:C52B.0003: input,hiddev96,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-10.3/input1
[    5.910446] usb 1-10.2: Found UVC 1.00 device WEB CAM (1b3f:2247)
[    5.911664] usb 1-10.2: Failed to query (GET_INFO) UVC control 2 on unit 1: -32 (exp. 1).
[    5.911800] hid-generic 0003:046D:C52B.0004: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-10.3/input2
[    5.913821] usb 1-10.2: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[    5.914045] input: WEB CAM: WEB CAM as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.2/1-10.2:1.0/input/input27
[    5.914076] usbcore: registered new interface driver uvcvideo
[    5.920763] audit: type=1130 audit(1653331989.453:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.924588] audit: type=1130 audit(1653331989.456:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.986775] usb 1-10.4: new full-speed USB device number 10 using xhci_hcd
[    5.996604] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.996607] Bluetooth: BNEP filters: protocol multicast
[    5.996609] Bluetooth: BNEP socket layer initialized
[    6.002118] NET: Registered PF_ALG protocol family
[    6.020254] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    6.023625] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88
[    6.023631] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    6.023714] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
[    6.029485] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    6.056021] e1000e 0000:00:1f.6 eno1: renamed from eth0
[    6.084366] usb 1-10.4: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[    6.084371] usb 1-10.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.084372] usb 1-10.4: Product: USB Receiver
[    6.084373] usb 1-10.4: Manufacturer: Logitech
[    6.086678] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.0/0003:046D:C534.0005/input/input28
[    6.140238] hid-generic 0003:046D:C534.0005: input,hidraw4: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-10.4/input0
[    6.142182] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.1/0003:046D:C534.0006/input/input29
[    6.142223] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.1/0003:046D:C534.0006/input/input30
[    6.196872] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.1/0003:046D:C534.0006/input/input31
[    6.196926] hid-generic 0003:046D:C534.0006: input,hiddev98,hidraw5: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-10.4/input1
[    6.365566] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    6.365572] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    6.365573] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    6.365575] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    6.365637] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    6.365640] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    6.365641] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    6.365642] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    6.365729] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    6.365733] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    6.365733] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    6.365734] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    6.365769] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    6.365773] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    6.365774] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    6.365775] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    6.365851] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    6.365855] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    6.365856] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    6.365856] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    6.365873] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    6.365877] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    6.365877] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    6.365878] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    6.365906] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    6.365909] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    6.365910] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    6.365911] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    6.365939] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    6.365943] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    6.365943] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    6.365944] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    6.365961] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    6.365965] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    6.365966] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    6.365967] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    6.399965] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    6.399972] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    6.399973] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    6.399975] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    6.537236] logitech-djreceiver 0003:046D:C52B.0004: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-10.3/input2
[    6.573641] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    6.652802] input: Logitech Wireless Device PID:406f Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.3/1-10.3:1.2/0003:046D:C52B.0004/0003:046D:406F.0007/input/input34
[    6.803624] input: Logitech Wireless Device PID:406f Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.3/1-10.3:1.2/0003:046D:C52B.0004/0003:046D:406F.0007/input/input35
[    6.803685] hid-generic 0003:046D:406F.0007: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:406f] on usb-0000:00:14.0-10.3/input2:1
[    6.813618] logitech-djreceiver 0003:046D:C534.0005: hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-10.4/input0
[    6.957126] logitech-djreceiver 0003:046D:C534.0006: hiddev97,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-10.4/input1
[    7.014542] logitech-djreceiver 0003:046D:C534.0006: device of type eQUAD nano Lite (0x0a) connected on slot 1
[    7.015086] input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.1/0003:046D:C534.0006/0003:046D:4023.0008/input/input39
[    7.016542] logitech-djreceiver 0003:046D:C534.0006: device of type eQUAD nano Lite (0x0a) connected on slot 2
[    7.036854] hid-generic 0003:046D:4023.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-10.4/input1:1
[    7.045637] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.1/0003:046D:C534.0006/0003:046D:4054.0009/input/input44
[    7.050517] hid-generic 0003:046D:4054.0009: input,hidraw6: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:14.0-10.4/input1:2
[    7.050603] mousedev: PS/2 mouse device common for all mice
[    7.203900] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    7.203911] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    7.203912] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    7.203913] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    7.203986] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    7.204000] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    7.204002] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    7.204003] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    7.204034] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    7.204043] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    7.204044] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    7.204045] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    7.204073] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    7.204080] pcieport 0000:00:1c.0: AER: can't find device of ID00e0
[    7.204188] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    7.204212] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    7.204213] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    7.204214] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    7.204225] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    7.204237] pcieport 0000:00:1c.0: AER: can't find device of ID00e0
[    7.204300] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    7.204309] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    7.204310] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    7.204311] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    7.204564] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    7.204577] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    7.204590] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    7.204591] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    7.204615] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    7.204619] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    7.204620] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    7.204621] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    7.204636] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    7.204643] pcieport 0000:00:1c.0: AER: can't find device of ID00e0
[    7.204697] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    7.204713] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    7.204715] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    7.204716] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    7.204832] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    7.204870] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    7.204871] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[    7.204873] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[    7.204884] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[    7.204891] pcieport 0000:00:1c.0: AER: can't find device of ID00e0
[    7.204892] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    7.204895] pcieport 0000:00:1c.0: AER: can't find device of ID00e0
[    7.310660] input: Logitech MX Ergo as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.3/1-10.3:1.2/0003:046D:C52B.0004/0003:046D:406F.0007/input/input48
[    7.310785] logitech-hidpp-device 0003:046D:406F.0007: input,hidraw2: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:00:14.0-10.3/input2:1
[    7.488693] input: Logitech Wireless Keyboard PID:4023 as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.1/0003:046D:C534.0006/0003:046D:4023.0008/input/input49
[    7.488806] logitech-hidpp-device 0003:046D:4023.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-10.4/input1:1
[    7.532632] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.1/0003:046D:C534.0006/0003:046D:4054.0009/input/input50
[    7.532714] logitech-hidpp-device 0003:046D:4054.0009: input,hidraw6: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-10.4/input1:2
[    8.280604] e1000e 0000:00:1f.6 eno1: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[    8.280607] e1000e 0000:00:1f.6 eno1: 10/100 speed: disabling TSO
[    8.280715] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[    9.581857] rfkill: input handler disabled
[    9.799021] usb 1-12: 3:1: cannot get freq at ep 0x84
[    9.806050] usb 1-12: 3:1: cannot get freq at ep 0x84
[   11.045569] kauditd_printk_skb: 204 callbacks suppressed
[   11.045576] audit: type=1131 audit(1653331994.576:123): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.842638] logitech-hidpp-device 0003:046D:4023.0008: HID++ 2.0 device connected.
[   16.098328] audit: type=1131 audit(1653331999.630:124): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.801202] audit: type=1100 audit(1653332001.333:125): pid=1081 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_shells,pam_faillock,pam_permit,pam_faillock,pam_gnome_keyring acct="hannes" exe="/usr/lib/gdm-session-worker" hostname=Hannes-GUSCHTAV addr=? terminal=/dev/tty1 res=success'
[   17.801820] audit: type=1101 audit(1653332001.333:126): pid=1081 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="hannes" exe="/usr/lib/gdm-session-worker" hostname=Hannes-GUSCHTAV addr=? terminal=/dev/tty1 res=success'
[   17.802635] audit: type=1103 audit(1653332001.333:127): pid=1081 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_faillock,pam_gnome_keyring acct="hannes" exe="/usr/lib/gdm-session-worker" hostname=Hannes-GUSCHTAV addr=? terminal=/dev/tty1 res=success'
[   17.804459] audit: type=1006 audit(1653332001.336:128): pid=1081 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[   17.804462] audit: type=1300 audit(1653332001.336:128): arch=c000003e syscall=1 success=yes exit=4 a0=a a1=7ffdaad9c550 a2=4 a3=7ffdaad9c264 items=0 ppid=584 pid=1081 auid=1000 uid=0 gid=1000 euid=0 suid=0 fsuid=0 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=3 comm="gdm-session-wor" exe="/usr/lib/gdm-session-worker" key=(null)
[   17.804464] audit: type=1327 audit(1653332001.336:128): proctitle=67646D2D73657373696F6E2D776F726B6572205B70616D2F67646D2D70617373776F72645D
[   17.819481] audit: type=1130 audit(1653332001.350:129): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.823723] audit: type=1101 audit(1653332001.356:130): pid=1090 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="hannes" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.823749] audit: type=1103 audit(1653332001.356:131): pid=1090 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="hannes" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   18.514340] rfkill: input handler enabled
[   18.531247] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[   18.531277] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[   18.531278] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[   18.531279] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[   18.531371] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[   18.531389] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[   18.531389] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[   18.531391] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[   18.531483] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[   18.531494] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[   18.531495] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[   18.531496] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[   20.830799]  sdb: sdb1
[   20.899946] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[   20.899966] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[   20.899967] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[   20.899969] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[   20.900080] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[   20.900098] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[   20.900099] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[   20.900100] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[   20.900221] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[   20.900225] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[   20.900226] pcieport 0000:00:1c.0:   device [8086:a33c] error status/mask=00000001/00002000
[   20.900227] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[   21.989325] Bluetooth: RFCOMM TTY layer initialized
[   21.989333] Bluetooth: RFCOMM socket layer initialized
[   21.989337] Bluetooth: RFCOMM ver 1.11
[   22.012483] kauditd_printk_skb: 6 callbacks suppressed
[   22.012486] audit: type=1130 audit(1653332005.543:136): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.566985] rfkill: input handler disabled
[   25.617606] audit: type=1106 audit(1653332009.150:137): pid=640 uid=0 auid=120 ses=1 msg='op=PAM:session_close grantors=pam_loginuid,pam_keyinit,pam_succeed_if,pam_permit,pam_systemd,pam_env acct="gdm" exe="/usr/lib/gdm-session-worker" hostname=Hannes-GUSCHTAV addr=? terminal=/dev/tty1 res=success'
[   25.617717] audit: type=1104 audit(1653332009.150:138): pid=640 uid=0 auid=120 ses=1 msg='op=PAM:setcred grantors=pam_permit acct="gdm" exe="/usr/lib/gdm-session-worker" hostname=Hannes-GUSCHTAV addr=? terminal=/dev/tty1 res=success'
[   25.740646] logitech-hidpp-device 0003:046D:406F.0007: HID++ 4.5 device connected.
[   35.794373] audit: type=1131 audit(1653332019.326:139): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   35.804113] audit: type=1131 audit(1653332019.336:140): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   41.439698] audit: type=1100 audit(1653332024.970:141): pid=1723 uid=1000 auid=1000 ses=4 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="hannes" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   41.439785] audit: type=1101 audit(1653332024.970:142): pid=1723 uid=1000 auid=1000 ses=4 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="hannes" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   49.162505] usb 1-10.2: Failed to query (GET_DEF) UVC control 2 on unit 1: -32 (exp. 1).
[   49.163069] usb 1-10.2: Failed to query (GET_DEF) UVC control 2 on unit 1: -32 (exp. 1).
[   50.006819] audit: type=1101 audit(1653332033.540:143): pid=1808 uid=1000 auid=1000 ses=4 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="hannes" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   50.007340] audit: type=1110 audit(1653332033.540:144): pid=1808 uid=1000 auid=1000 ses=4 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   50.008100] audit: type=1105 audit(1653332033.540:145): pid=1808 uid=1000 auid=1000 ses=4 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   50.032210] audit: type=1106 audit(1653332033.563:146): pid=1808 uid=1000 auid=1000 ses=4 msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   50.032264] audit: type=1104 audit(1653332033.563:147): pid=1808 uid=1000 auid=1000 ses=4 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   52.667613] audit: type=1131 audit(1653332036.200:148): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   52.773281] audit: type=1334 audit(1653332036.306:149): prog-id=0 op=UNLOAD
[   52.773293] audit: type=1334 audit(1653332036.306:150): prog-id=0 op=UNLOAD
[   52.773298] audit: type=1334 audit(1653332036.306:151): prog-id=0 op=UNLOAD
[   70.008876] audit: type=1131 audit(1653332053.540:152): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=geoclue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   72.751006] usb 1-10.1: USB disconnect, device number 6
[   77.949668] usb 1-10.1: new full-speed USB device number 11 using xhci_hcd
[   78.044798] usb 1-10.1: New USB device found, idVendor=2575, idProduct=0001, bcdDevice=31.00
[   78.044812] usb 1-10.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   78.044818] usb 1-10.1: Product: CoolTouch® System
[   78.044822] usb 1-10.1: Manufacturer: Weida Hi-Tech
[   78.045019] usb 1-10.1: rejected 1 configuration due to insufficient available bus power
[   78.045025] usb 1-10.1: no configuration chosen from 1 choice
[   78.579347] audit: type=1131 audit(1653332062.110:153): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-localed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   78.703188] audit: type=1334 audit(1653332062.237:154): prog-id=0 op=UNLOAD
[   78.703202] audit: type=1334 audit(1653332062.237:155): prog-id=0 op=UNLOAD
[   78.703208] audit: type=1334 audit(1653332062.237:156): prog-id=0 op=UNLOAD
[   80.163439] audit: type=1101 audit(1653332063.697:157): pid=1877 uid=1000 auid=1000 ses=4 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="hannes" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   83.786366] audit: type=1101 audit(1653332067.320:158): pid=1886 uid=1000 auid=1000 ses=4 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="hannes" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   83.786876] audit: type=1110 audit(1653332067.320:159): pid=1886 uid=1000 auid=1000 ses=4 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   83.787529] audit: type=1105 audit(1653332067.320:160): pid=1886 uid=1000 auid=1000 ses=4 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' 

Last edited by hannescam (2022-05-25 11:53:58)

Offline

#2 2022-05-23 19:21:59

Slithery
Administrator
From: Norfolk, UK
Registered: 2013-12-01
Posts: 5,776

Re: [SOLVED] my Weida Touchscreen does not work

Please edit your post and put [⁣code] [⁣/code] tags around all commands and their outputs, it makes things much easier to read for everyone.
https://bbs.archlinux.org/help.php#bbcode

Thanks


No, it didn't "fix" anything. It just shifted the brokeness one space to the right. - jasonwryan
Closing -- for deletion; Banning -- for muppetry. - jasonwryan

aur - dotfiles

Offline

#3 2022-05-23 19:54:14

progandy
Member
Registered: 2012-05-17
Posts: 5,184

Re: [SOLVED] my Weida Touchscreen does not work

That looks suspicious: The touchscreen might need more power than the port can provide:

[   77.949668] usb 1-10.1: new full-speed USB device number 11 using xhci_hcd
[   78.044798] usb 1-10.1: New USB device found, idVendor=2575, idProduct=0001, bcdDevice=31.00
[   78.044812] usb 1-10.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   78.044818] usb 1-10.1: Product: CoolTouch® System
[   78.044822] usb 1-10.1: Manufacturer: Weida Hi-Tech
[   78.045019] usb 1-10.1: rejected 1 configuration due to insufficient available bus power
[   78.045025] usb 1-10.1: no configuration chosen from 1 choice

| alias CUTF='LANG=en_XX.UTF-8@POSIX ' |

Offline

#4 2022-05-24 13:58:46

hannescam
Member
Registered: 2022-05-23
Posts: 4

Re: [SOLVED] my Weida Touchscreen does not work

thankyou progandy it worked it was pluged in to a usb 2 hub and now i plugged it in to the motherboard directly and perfect

Offline

Board footer

Powered by FluxBB